RAD-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
622
Rows
622
Columns
5,673
segTRTable
table.1.3.6.1.4.1.164.1.1.3.1
·
1 row entry
·
4 columns
Segments.
An entry in table segTRTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
segTRID
Segment unique identification number (internal). It is
the extreme left slot, marking the beginning of the segment. |
Integer32 | .1.3.6.1.4.1.164.1.1.3.1.1.1 |
||||||||
|
segTRLastSlot
Location of the right most slot marking the end of the
segment. In the RADring hub it is slot number 20 or the slot where end of segment module is inserted or the slot before a beginning of a new segment. ( End of seg… |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.1.1.3.1.1.2 |
||||||||
|
segTRFirstSlot
Location of the left most slot marking the beginning
of the segment. In the RADring hub it is slot number 1 or the slot number following the end of segment module, or where a repeater or TIO is inserted. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.1.1.3.1.1.3 |
||||||||
|
segTRStatus
Describes the status of the segment :
Normal(3) - The segment is operating normally Beaconing(2) - The ring is not operative; no data is transmitted. Segment without inband module within its limit will display Unknown(1… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.1.1.3.1.1.4 |
mdlTRTable
table.1.3.6.1.4.1.164.1.1.4.1
·
1 row entry
·
7 columns
Modules parameters structure contains general information about the modules.
An entry in table mdlTRTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
mdlTRID
The slot number where the module is inserted. Can not be greater
than chNoSlot |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.1.1.4.1.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlTRSegID
The segment number where the module belongs to. One of the
segTRID values. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.1.1.4.1.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlTRType
deprecated
Indicates the type of the module connected at the specified slot number.
|
Enumeration | .1.3.6.1.4.1.164.1.1.4.1.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlTRHwVer
ASCII string for description and display of the module's hardware version,
as it is known by the module's software. A manager can record his own hardware upgrade. |
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.1.1.4.1.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlTRSwVer
ASCII string for description and display of the module's
software version. A value of NOT APPLICABLE will be recorded for module having no independent processor. |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.1.1.4.1.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlTRTotalNoOfPrt
This entry describes the number of possible ports/lobes/links
connection in the module (not all ports hardware should be active) . |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.1.1.4.1.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlTRSpecific
Object identifier of entity containing additional information
regarding this instance. This entry is type specific. |
ObjectIdentifier Constraints: range: 1-20 |
.1.3.6.1.4.1.164.1.1.4.1.1.7 |
prtTRTable
table.1.3.6.1.4.1.164.1.1.5.1
·
1 row entry
·
12 columns
TReral port table for any media type.
An entry in table prtTRTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtTRModuleID
A unique identifier of the module(slot no.)this port is attached to.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.1.1.5.1.1.1 |
||||||||||||||||||||||||||||||||
|
prtTRID
A unique identifier of the port within its module.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.1.1.5.1.1.2 |
||||||||||||||||||||||||||||||||
|
prtTRFunctionality
Describes the functionality of the port in a Token ring topology or other implementations.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.1.1.5.1.1.3 |
||||||||||||||||||||||||||||||||
|
prtTRConnectorType
Type of hardware connector in the port.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.1.1.5.1.1.4 |
||||||||||||||||||||||||||||||||
|
prtTRAdminCmd
By setting this attribute to DISABLE(2) or SHORT(4) the
management station can force this lobe/port/link-connection to be removed and block any access to the network via this lobe/port/link. It is not mandatory th… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.1.1.5.1.1.5 |
||||||||||||||||||||||||||||||||
|
prtTRActiveState
This attribute describes the electrical or optical activity
state of a lobe or the state of a port. Certain values may not be applicable in some cases |
Enumeration | .1.3.6.1.4.1.164.1.1.5.1.1.6 |
||||||||||||||||||||||||||||||||
|
prtTRTrapMaskEnable
When this attribute is set to OFF by the management console the
agent starts sending the unmasked traps related to this port. Otherwise no traps from this port are sent. |
Enumerationr/w | .1.3.6.1.4.1.164.1.1.5.1.1.7 |
||||||||||||||||||||||||||||||||
|
prtTRstatus
This attribute indicates the status of this lobe/port
connection: DISABLED - (2) to (6) indicates the reason for the disabled state. INSERTED - (7)indicates that the lobe hardware inserts this lobe into the… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.1.1.5.1.1.8 |
||||||||||||||||||||||||||||||||
|
prtTRCableProtectEnable
The value of this attribute determines activation of the cable-fault
protection mechanism of TCR and the optical link mechanism of TFR and TFC . |
Enumeration | .1.3.6.1.4.1.164.1.1.5.1.1.9 |
||||||||||||||||||||||||||||||||
|
prtTRCableState
The value of this attribute determines the cable status
of TCR and the optical link mechanism of TFR and TFC . |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.1.1.5.1.1.10 |
||||||||||||||||||||||||||||||||
|
prtTRMACAddress
The value of this object is the specific MAC address
of this interface which uniquely identifies this Interface on a ring. |
MacAddress Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.1.1.5.1.1.11 |
||||||||||||||||||||||||||||||||
|
prtTRSpecific
Object identifier of entity containing additional information
regarding this instance. This entry is type specific. |
ObjectIdentifier | .1.3.6.1.4.1.164.1.1.5.1.1.12 |
prtTRMacAddressTable
table.1.3.6.1.4.1.164.1.1.5.2
·
1 row entry
·
4 columns
.
An entry in table prtTRMacAddressTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
prtTRMacAddressModuleID
A unique identifier of the module(slot no.)this port is attached to.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.1.1.5.2.1.1 |
||||||||
|
prtTRMacAddressPortID
A unique identifier of the port within its module.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.1.1.5.2.1.2 |
||||||||
|
prtTRMacAddressID
A identifier of the MAC address in the list according to the ring order
|
Integer32 | .1.3.6.1.4.1.164.1.1.5.2.1.3 |
||||||||
|
prtTRMACAddressValue
MAC address from the list of addresses connected to this port
|
MacAddress Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.1.1.5.2.1.4 |
segRRSecurityTable
table.1.3.6.1.4.1.164.1.2.2.1
·
1 row entry
·
5 columns
RADRing segments' specific information
An entry in table segRRSecurityTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
segRRID
Segment unique identification number (internal). It is
the extreme left slot, marking the beginning of the segment. TR segment no.: 1 .. 20 Ethernet segment no.: 21. |
Integer32 | .1.3.6.1.4.1.164.1.2.2.1.1.1 |
||||||
|
segRRSecID
Segment's security unique identification number
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.1.2.2.1.1.2 |
||||||
|
segRRSecEnable
This entry indicates whether the specific segment's security is active or not
|
Enumerationr/w Constraints: range: 1-20 |
.1.3.6.1.4.1.164.1.2.2.1.1.3 |
||||||
|
segRRSecurityPattern
A six-octet (48 bit) pattern, where the masked bits of segTRSecurityMask
need to match the MAC address of each port within the segment. A Value of all-zeros indicates no security. |
MacAddressr/w Enumerated Values:
Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.1.2.2.1.1.4 |
||||||
|
segRRSecurityMask
Mask of the allowed MAC address that can be connected through
the ports within the segment |
MacAddressr/w Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.1.2.2.1.1.5 |
mdlRRTable
table.1.3.6.1.4.1.164.1.2.3.1
·
1 row entry
·
14 columns
RADRing specific modules' information
An entry in table mdlRRTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
mdlRRid
Unique number to identify the module. It indicates the slot
number the module is inserted in. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.1.2.3.1.1.1 |
||||||
|
mdlRRTLRstatus
This entry specifies the status of the setup on the TL-2/Exx
modules. When the value is ON, lobe one is the only active lobe. This entry will have the value UNKNOWN for all other modules |
Enumeration | .1.3.6.1.4.1.164.1.2.3.1.1.2 |
||||||
|
mdlRRtermination
Attribute describing the termination state as set by the switches on the
lobe modules |
Enumeration | .1.3.6.1.4.1.164.1.2.3.1.1.3 |
||||||
|
mdlRRReset
When this object is set to the value of ON(3),
the module performs software reset. Upon completion, a trap will be issued to the management station and the value will be set to OFF. This entry will have the value of U… |
Enumerationr/w | .1.3.6.1.4.1.164.1.2.3.1.1.4 |
||||||
|
mdlRRLed
This entry specifies the LEDs status in the module . Each led will be represented by 4 bits
where the first 2 bits will specify the status (NA, OFF, ON, BLINK), and the next two bits will specify the color (RED, GREEN… |
OctetString | .1.3.6.1.4.1.164.1.2.3.1.1.5 |
||||||
|
mdlRRSpeed
Attribute describing the bandwidth of the media as set by the module switches.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.1.2.3.1.1.6 |
||||||
|
mdlRRMngAutoDis
obsolete
Attribute describing the setup of the MNG switch on the TL- Active cards. Value ON indicates
the ability of activating the auto-disable mechanism of the card via management command. Value OFF indicates that the ac… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.1.2.3.1.1.7 |
||||||
|
mdlRRAutodisable
This attribute can be set by the manager if the value of mdlRRMngAutoDis is ON. It
controls the behavior of the Active cards regarding the Auto-disable mechanism. All ports will be in the same mode. Applicable to Tok… |
Enumerationr/w | .1.3.6.1.4.1.164.1.2.3.1.1.8 |
||||||
|
mdlRRConfigMsg
Full configuration message coded in internal RAD application format.
This entry describes module' configuration. |
OctetString | .1.3.6.1.4.1.164.1.2.3.1.1.9 |
||||||
|
mdlRRMngState
This entry indicates the setting of the module's switches. ENABLE means that the module
can accept management commands. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.1.2.3.1.1.10 |
||||||
|
mdlRRType
Indicates the type of the module installed in the specified slot number.
|
Enumeration | .1.3.6.1.4.1.164.1.2.3.1.1.11 |
||||||
|
mdlRRHwVer
ASCII string for description and display of the module's hardware version,
as it is known by the module's software. A manager can record his own hardware upgrade. |
SNMPv2-TCDisplayStringr/w Enumerated Values:
Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.1.2.3.1.1.12 |
||||||
|
mdlRRSwVer
ASCII string for description and display of the module's
software version. A value of NOT APPLICABLE will be recorded for a module having no independent processor. |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.1.2.3.1.1.13 |
||||||
|
mdlRRSpecific
Object identifier of entity containing additional information
regarding this instance. This entry is module type specific. |
ObjectIdentifier | .1.3.6.1.4.1.164.1.2.3.1.1.14 |
mdlIBTable
table.1.3.6.1.4.1.164.1.2.3.2
·
1 row entry
·
13 columns
Additional parameters that can be monitored for a segment with an inband module. Module specific for Token Ring
An entry in table mdlIBTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
mdlIBid
Unique number to identify the CML\IB module. It indicates the slot
number the module is inserted in |
Integer32 | .1.3.6.1.4.1.164.1.2.3.2.1.1 |
||||||||
|
mdlIBsegID
Unique number to identify the segment where the CML\IB module
is inserted. It is one of the segTRID values. |
Integer32 | .1.3.6.1.4.1.164.1.2.3.2.1.2 |
||||||||
|
mdlIBCorrelationEnable
When set to ON(3), the in-band agent should perform
correlation each time a station enters/leaves the segment. |
Enumerationr/w | .1.3.6.1.4.1.164.1.2.3.2.1.3 |
||||||||
|
mdlIBAutorecEnable
When set to ON(3), the in-band agent should perform
autorecovery each time a beacon status is detected. |
Enumerationr/w | .1.3.6.1.4.1.164.1.2.3.2.1.4 |
||||||||
|
mdlIBAutorecResult
When autorecovery is completed the result will be reported (3)..(7).
While in autorecovery process, started(2) will be reported. Before autorecovery process, notStarted(1) will be reported. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.1.2.3.2.1.5 |
||||||||
|
mdlIBcommand
When this object is set to the value of
open(2), the station should go into the open state. The progress and success of this command is given by the values of the object mdlIBstate. When this object is set to the v… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.1.2.3.2.1.6 |
||||||||
|
mdlIBstate
The current adapter status, which can
be used to diagnose fluctuating problems. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.1.2.3.2.1.7 |
||||||||
|
mdlIBagnt
Indicates whether the specific inband module serves as:
- Active hub agent - (on) - Ring Monitor (for TR module only) - (off) - Standby agent - (standBy) |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.1.2.3.2.1.8 |
||||||||
|
mdlIBIpAddress
Indicates IP address of the module if the module serves as
an agent of itself. |
RFC1155-SMIIpAddress Enumerated Values:
Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.1.2.3.2.1.9 |
||||||||
|
mdlIBLocalMacAddr
The value of this object is the specific MAC address
of this interface which uniquely identifies this interface on a ring.It is the address set by the management and upon request it will replace the burn in address. … |
MacAddressr/w Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.1.2.3.2.1.10 |
||||||||
|
mdlIBLocalAddrStatus
The value of this object specifies whether the specific
MAC address of this interface was set by the local management or it is the burn-in address in use. |
Enumerationr/w | .1.3.6.1.4.1.164.1.2.3.2.1.11 |
||||||||
|
mdlIBbrnInMacAddr
The value of this object is the specific Burn-in MAC address
of this interface which uniquely identifies this interface on a ring. Non-canonical format. |
MacAddress Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.1.2.3.2.1.12 |
||||||||
|
mdlIBTrapMaskEnable
When this attribute is set to OFF by the management console, the
agent starts sending the unmasked traps related to this module. Otherwise, no traps are sent by this module. |
Enumerationr/w | .1.3.6.1.4.1.164.1.2.3.2.1.13 |
mdlBRGTable
table.1.3.6.1.4.1.164.1.2.3.3
·
1 row entry
·
8 columns
Special modules such as bridges/converters that are within the hub
An entry in table mdlBRGTable.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
mdlBRGid
Unique number to identify the module. It indicates the slot
number the module is inserted in. |
Integer32 | .1.3.6.1.4.1.164.1.2.3.3.1.1 |
|
mdlBRGReady
This entry will have the value ON when packets can be transferred in the TRE module.
The value UNKNOWN will be used for all other modules where this characteristic is not applicable |
Enumeration | .1.3.6.1.4.1.164.1.2.3.3.1.2 |
|
mdlBRGStatus
This entry specifies the status of operation of the STC or FTC modules. For other modules
this value will read NOAP |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.1.2.3.3.1.3 |
|
mdlBRGLocation
This entry indicates the configuration mode:
- for the TRE bridge (main/remote) - for MLB-T, MLBT-F (main/secondary) |
Enumeration | .1.3.6.1.4.1.164.1.2.3.3.1.4 |
|
mdlBRGIpAddress
Indicates IP address of the module if the module serves as an agent of itself. For
all other modules the IP value will be 0.0.0.0 |
RFC1155-SMIIpAddress Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.1.2.3.3.1.5 |
|
mdlBRGMacAddr
The value of this object is the specific MAC address
of this interface which uniquely identifies this interface on a ring. |
MacAddress Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.1.2.3.3.1.6 |
|
mdlBRGAdapterState
The current adapter status, which can
be used to diagnose fluctuating problems. This object is applicable only for TR bridges with adapter. The value 'unknown' will be used for other module types. |
Enumeration | .1.3.6.1.4.1.164.1.2.3.3.1.7 |
|
mdlBRGBypassSw
This entry is applicable only for FTB-D/FO module.
It describes the status of the Bypass Switch. The value UNKNOWN will be used for all other modules where this characteristic is not applicable |
Enumeration | .1.3.6.1.4.1.164.1.2.3.3.1.8 |
mdlMMTable
table.1.3.6.1.4.1.164.1.2.3.4
·
1 row entry
·
2 columns
Special 'WAN' modules that are within the RadRing hub
An entry in table mdlMMTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
mdlMMid
Unique number to identify the module. It indicates the slot
number the module is inserted in. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.1.2.3.4.1.1 |
||||
|
mdlMMBertCmd
Setting this Object to ON, will start BERT test on all the channels that are currently in
Remote Loop. If the value of mdlRRMngState is disabled, this parameter is read-only and reflects the module… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.1.2.3.4.1.2 |
mdlETTable
table.1.3.6.1.4.1.164.1.2.3.5
·
1 row entry
·
2 columns
'Ethernet' modules that are within the hub
An entry in table mdlETTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
mdlETid
Unique number to identify the module. It indicates the slot
number the module is inserted in. It is the same as rptrGroupIndex in the Repeater MIB |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.1.2.3.5.1.1 |
||||||
|
mdlETSAmode
Setting this Object to ON, will change the mode of operation
of the Ethernet card to a stand alone operation mode. It will disconnect the card from the repeater bus. The rptrGroupOperStatus parameter in the Repea… |
Enumerationr/w | .1.3.6.1.4.1.164.1.2.3.5.1.2 |
prtRRTable
table.1.3.6.1.4.1.164.1.2.4.1
·
1 row entry
·
13 columns
RADRing specific port information
An entry in table prtRRTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtRRmdlID
A unique identifier of the module,(slot no.),this port is attached to.
|
SNMPv2-SMIInteger32 Constraints: range: 1-65535Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.1.2.4.1.1.1 |
||||||||||||||||||||||||||
|
prtRRID
A unique identifier of the port within its module.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.1.2.4.1.1.2 |
||||||||||||||||||||||||||
|
prtRRSecurityState
This entry indicates whether a security check can be performed on
the specific port. This value is directly related to the presence of an inband module in the segment where the port belongs to and to activation of the … |
Enumeration | .1.3.6.1.4.1.164.1.2.4.1.1.3 |
||||||||||||||||||||||||||
|
prtRRSecurityEnable
This value indicates whether a security check should be performed.
Setting this value to ON(3) will activate the security mechanism if and only if, the value of prtRRSecurityState is ACTIVE. |
Enumerationr/w | .1.3.6.1.4.1.164.1.2.4.1.1.4 |
||||||||||||||||||||||||||
|
prtRRSecurityMask
Mask of the allowed MAC address that can be connected through
this port. The security of the individual port overwrites the security of the segment where the port belongs to |
MacAddressr/w Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.1.2.4.1.1.5 |
||||||||||||||||||||||||||
|
prtRRSecurityPattern
A six-octet(48 bit) pattern, where the masked bits of prtRRSecurityMask
should match the MAC address. |
MacAddressr/w Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.1.2.4.1.1.6 |
||||||||||||||||||||||||||
|
prtRRJitterAttenEnable
The value of this attribute determines activation of the
jitters Attenuation mechanism of repeater's port . |
Enumerationr/w Constraints: range: 1-65535 |
.1.3.6.1.4.1.164.1.2.4.1.1.7 |
||||||||||||||||||||||||||
|
prtRRConfigMsg
Full configuration message coded in internal RAD application format.
This entry describes port' configuration. |
OctetString Constraints: range: 1-65535 |
.1.3.6.1.4.1.164.1.2.4.1.1.8 |
||||||||||||||||||||||||||
|
prtRRFlipAutoDisable
Attribute describing the control on the flipping mechanism of a lobe .
Value ON indicates the ability of the lobe to auto disable itself when flipping occur. Value OFF indicates that the auto disable mechanism s… |
Enumerationr/w Constraints: range: 1-65535 |
.1.3.6.1.4.1.164.1.2.4.1.1.9 |
||||||||||||||||||||||||||
|
prtRRSecurityMask2
Mask of the allowed MAC address that can be connected through
this port. The security of the individual port overwrites the security of the segment where the port belongs to |
MacAddressr/w Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.1.2.4.1.1.10 |
||||||||||||||||||||||||||
|
prtRRSecurityPattern2
A six-octet(48 bit) pattern: where the masked bits of prtRRSecurityMask2
should match the MAC address. |
MacAddressr/w Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.1.2.4.1.1.11 |
||||||||||||||||||||||||||
|
prtRRMode
Indicates the port status of rr-sat card after the communication
is broken. When configured to smart-port, the port disables itself when there is no management communication with attachment. interRptrPort - this port is… |
Enumerationr/w | .1.3.6.1.4.1.164.1.2.4.1.1.12 |
||||||||||||||||||||||||||
|
prtRRAttachment
Indicates the type of the port attachment. Smart attachment types
are applicable for rr-sat card only |
Enumeration | .1.3.6.1.4.1.164.1.2.4.1.1.13 |
prtMMTable
table.1.3.6.1.4.1.164.1.2.4.2
·
1 row entry
·
7 columns
RADRing specific WAN modules port information.
An entry in table prtMMTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
prtMMmdlID
A unique identifier of the module(slot no.)this port is attached to.
|
SNMPv2-SMIInteger32 Constraints: range: 6-6Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.1.2.4.2.1.1 |
||||
|
prtMMID
A unique identifier of the port (link) within its module.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.1.2.4.2.1.2 |
||||
|
prtMMAdminCmd
Setting the object to locLoop(2) or remLoop(3) will activate the corresponding test.
Value remLoop(3) activates the BERT test on the related link if mdlMMBertCmd is set to on(3). Setting parameter to normal(1), restores… |
Enumerationr/w | .1.3.6.1.4.1.164.1.2.4.2.1.3 |
||||
|
prtMMOperStatus
Reflects the Synchronization status.
|
Enumeration | .1.3.6.1.4.1.164.1.2.4.2.1.4 |
||||
|
prtMMTestStatus
Reflects the link status. When the object is set to the value of bert(4),
it means that the remote loopback is active too. |
Enumeration | .1.3.6.1.4.1.164.1.2.4.2.1.5 |
||||
|
prtMMBertResult
The value of this object indicates the status of the last BERT test.
|
Enumeration | .1.3.6.1.4.1.164.1.2.4.2.1.6 |
||||
|
prtMMTrapMaskEnable
When this object is set to OFF by the management console, the
agent starts sending the unmasked traps related to this module. Otherwise, no traps are sent by this module. |
Enumerationr/w | .1.3.6.1.4.1.164.1.2.4.2.1.7 |
prtETTable
table.1.3.6.1.4.1.164.1.2.4.3
·
1 row entry
·
3 columns
RADRing specific Ethernet port information
An entry in table prtETTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
prtETmdlID
A unique identifier of the module, (slot no.), this port is attached to.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.1.2.4.3.1.1 |
||||||||
|
prtETID
A unique identifier of the port within its module.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.1.2.4.3.1.2 |
||||||||
|
prtETTrapMaskEnable
When this attribute is set to OFF by the management console, the
agent starts sending the unmasked traps related to this port. Otherwise, no traps are sent by this port. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.1.2.4.3.1.3 |
prtRRSecTable
table.1.3.6.1.4.1.164.1.2.4.4
·
1 row entry
·
5 columns
RR Port Security Table (10.08.95)
An entry in table prtRRSecTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
prtRRSecmdlID
A unique identifier of the module,(slot no.),this port is
attached to. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.1.2.4.4.1.1 |
||||||||
|
prtRRSecPrtID
A unique identifier of the port within its module.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.1.2.4.4.1.2 |
||||||||
|
prtRRSecID
A unique identifier of the security number within the port.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.1.2.4.4.1.3 |
||||||||
|
prtRRSecMask
Mask of the allowed MAC address that can be connected through
this port. The security of the individual port overwrites the security of the segment, the port belongs to |
MacAddressr/w Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.1.2.4.4.1.4 |
||||||||
|
prtRRSecPattern
A six-octet(48 bit) pattern, where the masked bits of
prtRRSecMask should match the MAC address. |
MacAddressr/w Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.1.2.4.4.1.5 |
radFddiStationTable
table.1.3.6.1.4.1.164.2.1.2
·
1 row entry
·
7 columns
A list of FddiStation entries. The number of entries is given by the value of radFddiStationsNumber.
An entry in table radFddiStationTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
radFddiStationIndex
A unique value for each Station. Its value ranges
between 1 and the value ofradFddiStationNumber. |
Integer32 | .1.3.6.1.4.1.164.2.1.2.1.1 |
||||||||||||
|
radFddiStationType
Indicates the type of the station.
|
Enumeration | .1.3.6.1.4.1.164.2.1.2.1.2 |
||||||||||||
|
radFddiStationBus1TestResult
Indicates the result of a test performed on Bus1.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.2.1.2.1.3 |
||||||||||||
|
radFddiStationBus2TestResult
Indicates the result of a test performed on Bus2.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.2.1.2.1.4 |
||||||||||||
|
radFddiStationTempDeInsertAction
This action provides temporary deinsertion of the root
station from the ring. Expressed in milliseconds. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.2.1.2.1.5 |
||||||||||||
|
radFddiStationPerformTest
A value ON of this attribute indicates that a test should be
performed upon the Station. |
Enumerationr/w | .1.3.6.1.4.1.164.2.1.2.1.6 |
||||||||||||
|
radFddiStationOpticalSwitchStatus
A value ON of this attribute indicates that the Station
is in bypass mode. |
Enumeration | .1.3.6.1.4.1.164.2.1.2.1.7 |
radFddiSMTTable
table.1.3.6.1.4.1.164.2.2
·
1 row entry
·
5 columns
A list of FddiSMT entries. The number of entries is given by the value of snmpFddiSMTNumber.
An entry in table radFddiSMTTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
radFddiSMTIndex
A unique value for each SMT. Its value ranges
between 1 and the value of snmpFddiSMTNumber. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.2.2.1.1 |
||||||||||
|
radFddiSMTStation
Indicates the Station inside the box to which the
current SMT belongs. Its value ranges between 1 and the value of radFddiStationNumber. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.2.2.1.2 |
||||||||||
|
radFddiSMTCFState
obsolete
The attachement configuration for the Station. Extends the
range of values provided by the SNMP variable snmpFddiSMTCFState from the SNMP FDDI MIB. |
Enumeration | .1.3.6.1.4.1.164.2.2.1.3 |
||||||||||
|
radFddiSMTLeftSlot
Indicates the slot number of the leftmost card on the concentrator
implemented inside the box and managed by the agent MAC. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.2.2.1.4 |
||||||||||
|
radFddiSMTRightSlot
Indicates the slot number of the rightmost card on the concentrator
implemented inside the box and managed by the agent MAC. Note that the MAC-agent card itself is not taken into consideration. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.2.2.1.5 |
radFddiMACTable
table.1.3.6.1.4.1.164.2.3
·
1 row entry
·
13 columns
A list of FddiMAC entries. The number of entries is given by the value of snmpFddiMACNumber.
An entry in table radFddiMACTable.
Indexes
agnSErrIdx
| Column | Syntax | OID | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
radFddiMACSMTIndex
The value of the SMT index associated with this MAC.
|
Integer32 | .1.3.6.1.4.1.164.2.3.1.1 |
||||||||||||||||||||||||||
|
radFddiMACIndex
A unique value for each MAC. Its value ranges
between 1 and the value of snmpFddiMACNumber. |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.164.2.3.1.2 |
||||||||||||||||||||||||||
|
radFddiMACStation
Indicates the Station inside the box to which the
current MAC belongs. Its value ranges between 1 and the value of radFddiStationNumber. |
Integer32 | .1.3.6.1.4.1.164.2.3.1.3 |
||||||||||||||||||||||||||
|
radFddiMACTestResult
Indicates the result of a test performed on MAC.
The value is a sum. It takes the value 0 if the result of the test is OK and if faults occur, 2 raised to a power is added to the sum. The powers are according to the fo… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.2.3.1.4 |
||||||||||||||||||||||||||
|
radFddiMACTokenCt
Token Counts - Refer to ANSI MAC {73}.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.2.3.1.5 |
||||||||||||||||||||||||||
|
radFddiMACRingLoad
Current traffic value. The
traffic is expressed in percents of the maximum FDDI traffic in the range 1..20, expressed on a log(10) scale ( value = 10*log10(percent) ). |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.2.3.1.6 |
||||||||||||||||||||||||||
|
radFddiMACRingLoadBuffer
Record of traffic for the last second with a resolution of 100 msec. The
traffic is expressed in percents of the maximum FDDI traffic and each record contains 10 readings, in the range 1..20, expressed on a log(10) sca… |
OctetString | .1.3.6.1.4.1.164.2.3.1.7 |
||||||||||||||||||||||||||
|
radFddiMACRingLoadTrsh
Traffic threshold value. When exceeded, a trap is send to the management
console. Expressed in percents of the maximum FDDI traffic, in the range 1..20, expressed on a log(10) scale. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.2.3.1.8 |
||||||||||||||||||||||||||
|
radFddiMACRingLoadPeak
Maximal traffic value since last reset of hub or relay. Expressed in per-
cents of the maximum FDDI traffic, in the range 1..20, expressed on log(10) scale. |
SNMPv2-SMIInteger32 Constraints: range: 1-255Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.2.3.1.9 |
||||||||||||||||||||||||||
|
radFddiMACDownstreamNbr
The MAC's downstream neighbor's long individual MAC address. The value
shall be reported as '00 00 00 00 00 00' if it is unknown. |
OctetString Constraints: range: 1-2 |
.1.3.6.1.4.1.164.2.3.1.10 |
||||||||||||||||||||||||||
|
radFddiMACRingStatus
Attribute which summs the status of the ring controlled by the current
MAC. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.2.3.1.11 |
||||||||||||||||||||||||||
|
radFddiMACRingUtilization
Current traffic value. The traffic is expressed in percents of the maximum FDDI traffic.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.2.3.1.12 |
||||||||||||||||||||||||||
|
radFddiMACRingPeakUtilization
Peak traffic value since las reset of the hub or relay. The traffic is expressed
in percents of the maximum FDDI traffic. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.2.3.1.13 |
radFddiGroupTable
table.1.3.6.1.4.1.164.2.4
·
1 row entry
·
10 columns
A list of FddiGroup entries. The number of entries is given by the value of snmpFddiGroupNumber.
An entry in table radFddiGroupTable.
Indexes
agnCnfgIdx
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
radFddiGroupId
Unique ID of the group in radFddiGroupTable. Equivalent to slot number
in enclosures. |
SNMPv2-SMIInteger32 Constraints: range: 1-255Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.2.4.1.1 |
||||||||||||||||||||||||||||||||||||||||||
|
radFddiGroupRedundancy
This attribute shows the usage of the A/B pair of ports in Tree mode.
If the redundancy conditions are not fulfilled, value none(1) will be returned. If backup mode port A is a standby backup of port B, otherwise each o… |
Enumerationr/w Constraints: range: 0-30 |
.1.3.6.1.4.1.164.2.4.1.2 |
||||||||||||||||||||||||||||||||||||||||||
|
radFddiGroupTopologyMode
Defines the topology mode of the FDDI PHY card.
|
Enumeration Constraints: range: 0-255 |
.1.3.6.1.4.1.164.2.4.1.3 |
||||||||||||||||||||||||||||||||||||||||||
|
radFddiGroupTestResult
Result of test performed upon an FDDI group. A value of faulty (1)
indicates a CPU or communication at module level. |
Enumeration Constraints: range: 0-255 |
.1.3.6.1.4.1.164.2.4.1.4 |
||||||||||||||||||||||||||||||||||||||||||
|
radFddiGroupConfigStatus
Indicates the configuration status of the module (group).
|
Enumeration | .1.3.6.1.4.1.164.2.4.1.5 |
||||||||||||||||||||||||||||||||||||||||||
|
radFddiGroupAutoRightLoop
Value ON of this attribute signifies that a hardware loop was
automatically created on a FDDI module which does not sense the existence of another FDDI group on the right hand side. |
Enumeration | .1.3.6.1.4.1.164.2.4.1.6 |
||||||||||||||||||||||||||||||||||||||||||
|
radFddiGroupAutoLeftLoop
Value ON of this attribute signifies that a hardware loop was
automatically created on a FDDI module which does not sense the existence of another FDDI group on the left hand side. |
Enumeration | .1.3.6.1.4.1.164.2.4.1.7 |
||||||||||||||||||||||||||||||||||||||||||
|
radFddiGroupManRightLoop
Setting this attribute to ON signifies a command to the hardware
to create a loop on the FDDI module which isolates the ring from the right hand side. |
Enumerationr/w | .1.3.6.1.4.1.164.2.4.1.8 |
||||||||||||||||||||||||||||||||||||||||||
|
radFddiGroupManLeftLoop
Setting this attribute to ON signifies a command to the hardware
to create a loop on the FDDI module which isolates the ring from the left hand side. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.2.4.1.9 |
||||||||||||||||||||||||||||||||||||||||||
|
radFddiGroupOpticalSwitchStatus
This attribute describes the presence of the optical switch
and for existing optical switches describes the possibility of auto-reconfiguration of path resources (MACs and M-ports) in the case of bus fault or connectio… |
Enumeration | .1.3.6.1.4.1.164.2.4.1.10 |
radFddiPortTable
table.1.3.6.1.4.1.164.2.5
·
1 row entry
·
7 columns
.
An entry in table radFddiPortTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
radFddiPortGroupID
ID of group to which the FDDI card belongs.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.2.5.1.1 |
||||||||||||
|
radFddiPortID
Unique Id of the port in the radFddiPortEntry.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.2.5.1.2 |
||||||||||||
|
radFddiPortTestResult
Indicates the result of a test performed on a port.
|
Enumeration | .1.3.6.1.4.1.164.2.5.1.4 |
||||||||||||
|
radFddiPortNumberOfConnectedStations
Number of stations connected to the port.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.2.5.1.5 |
||||||||||||
|
radFddiPortConnectedStations
This attribute displays the configuration of the stations connected
to the port.The FDDI addresses of the stations are displayed in ring order, starting with the address of the first station connected to the port. The… |
OctetString | .1.3.6.1.4.1.164.2.5.1.6 |
||||||||||||
|
radFddiPortCurrentPath
obsolete
Current Path in FDDI port on PHY cards.
|
Enumerationr/w | .1.3.6.1.4.1.164.2.5.1.8 |
||||||||||||
|
radFddiPortFunctionalStatus
Fubctional status of the port according to value of link error
estimate relative to thresholds of alarm and cutoff. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.2.5.1.9 |
agnSAlrTable
table.1.3.6.1.4.1.164.3.1.2.1.15
·
1 row entry
·
8 columns
List of agent related alarms and indications for alarms at system level.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
agnSAlrIdx
A unique number to identify an entry in the alarm status table
of the agent. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.1.15.1.1 |
||||||||||||||||||||||||||
|
agnSAlrCodeDescription
This attribute is a full text description of the alarm .
The alarm description includes the following information: alarm code, alarm text, alarm severity, Masked or Inverted flag and counter. |
OctetString | .1.3.6.1.4.1.164.3.1.2.1.15.1.2 |
||||||||||||||||||||||||||
|
agnSAlrCode
A code identifying the alarm of an entry in the alarm status
table at system level. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.1.15.1.3 |
||||||||||||||||||||||||||
|
agnSAlrSeverity
The severity of the alarm.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.2.1.15.1.4 |
||||||||||||||||||||||||||
|
agnSAlrState
State of the alarm.
|
Enumeration | .1.3.6.1.4.1.164.3.1.2.1.15.1.5 |
||||||||||||||||||||||||||
|
agnSAlrCounter
A counter - how many times the alarm occured since last
clear operation. ON and OFF Alarm will be counted separately. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.1.15.1.6 |
||||||||||||||||||||||||||
|
agnSAlrMask
Alarm mask : on/off.
|
Enumeration | .1.3.6.1.4.1.164.3.1.2.1.15.1.7 |
||||||||||||||||||||||||||
|
agnSAlrInvert
Alarm invert : on/off.
|
Enumeration | .1.3.6.1.4.1.164.3.1.2.1.15.1.8 |
agnSErrListTable
table.1.3.6.1.4.1.164.3.1.2.1.20
·
1 row entry
·
2 columns
List of errors and warnings found during Sanity Check process.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
agnSErrIdx
Unique number to identify an entry in the error list table.
The maximum entry value cannot exceed the value of 'agnSNoOfSanityCheckErr'. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.1.20.1.1 |
||||
|
agnSErrDescription
This attribute is a full text description of the sanity check
error including error code, slot and port numbers related to the code . |
OctetString | .1.3.6.1.4.1.164.3.1.2.1.20.1.2 |
agnSCnfgTable
table.1.3.6.1.4.1.164.3.1.2.1.22
·
1 row entry
·
2 columns
This table contains an entry per configuration. It indicates if the configuration is valid.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
agnSEntryIdx
Unique number to identify an entry in the configuration table.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.1.22.1.1 |
||||||||||
|
agnSEntryIsValid
This attribute indicates whether the specific configuration
is valid in the MUX . Value of NO indicates: no such configuration in the MUX. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.2.1.22.1.2 |
agnCClkSrcTable
table.1.3.6.1.4.1.164.3.1.2.2.4
·
1 row entry
·
5 columns
All the entries of this table are identical (have the same value) for all the configurations (1..100) except the TmpCnfg. The write operation into the Table Objects is valid only for the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
agnCClkCnfgIdx
This attribute indicates the Idx of the Cnfg(1..100) being
accessed and Idx 255 relates to the TmpCnfg. |
Integer32 | .1.3.6.1.4.1.164.3.1.2.2.4.1.1 |
|
agnCClkSrcIdx
An index to the table. There are only two entries to this
table. Index 1 points to the Master clock parameters and Index 2 points to the Fallback clock parameters |
Integer32 | .1.3.6.1.4.1.164.3.1.2.2.4.1.2 |
|
agnCClkSrcMode
The source of the nodal timing.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.2.2.4.1.3 |
|
agnCClkSrcSlt
This entry is valid only when we are working in rxClk mode.
For an invalid entry, the return value will be '7fff'h. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.2.2.4.1.4 |
|
agnCClkSrcPrt
This entry is valid only when we are working in rxClk or
adaptive mode. For an invalid entry, the return value will be '7fff'h. - For rxClk mode, the values can be: exPrt1 (1) , exPrt2 (2) , … |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.2.4.1.5 |
agnCnfgDataTable
table.1.3.6.1.4.1.164.3.1.2.2.7
·
1 row entry
·
5 columns
This table contains data about the agent configurations. The table will support only data about valid configurations of the agent.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
agnCnfgIdx
This object indicates the Idx of the agent' Cnfg the following
objects refer. 255=Temporary Cnfg (Set is done only to this configuration). |
Integer32 | .1.3.6.1.4.1.164.3.1.2.2.7.1.1 |
|
agnCnfgDesc
This object is a description of the Configuration, entered
by user, to enhance Cnfg recognition. |
OctetStringr/w | .1.3.6.1.4.1.164.3.1.2.2.7.1.2 |
|
agnCnfgUpdDate
This object indicates the date when last update of this
configuration was performed, as it is known by the agent using its own real-time clock. The format would be as specified by the agnSDateFormat. When update is perf… |
OctetString | .1.3.6.1.4.1.164.3.1.2.2.7.1.3 |
|
agnCnfgUpdTime
This object indicates the time when last update of this
configuration was performed, as it is known by the agent using its own real-time clock. When update is performed, the agent should save the time. |
OctetString | .1.3.6.1.4.1.164.3.1.2.2.7.1.4 |
|
agnCnfgUpdMnger
This object indicates the IP Address of the Manager who
performed the last update of this configuration. When update is performed, the agent should save the IP Address of the Manager who commanded the update. That will … |
RFC1155-SMIIpAddress Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.3.1.2.2.7.1.5 |
agnCnfgAlrTable
table.1.3.6.1.4.1.164.3.1.2.2.8.2
·
1 row entry
·
9 columns
This table enables the user to set attributes to each alarm.
Setting for a non-existing entry agnCnfgAlrMask,
agnCnfgAlrInvert or agnCnfgAlrFilter to 'yes'(or yesAndSave
for Mask) will add this new entry to the table.
Setting for an existing entry agnCnfgAlrMask/
agnCnfgAlrInvert/agnCnfgAlrFilter (one or more) to 'no'
(noAndSave for Mask) so that ALL these objects' values are
'no' , will delete this entry from the table.
For agnCnfgAlrMask, only if [(last saved value=noAndSave)
AND (new value is 'no' or 'noAndSave')] the object's value
is considered 'no' for deleting the entry.
For some products (like MP, MPH, Vmux2100) the Active Alarms are always
part of the table and cannot be removed even if their Mask/Invert/Filter
are No.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
agnCnfgAlrCode
The alarm code. The following attributes refer this code.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.2.8.2.1.1 |
|
agnCnfgAlrSlot
The alarm slot. The following attributes apply for the alarm
code and slot selected. all = the attributes apply to all slots. notApplicable = the selected alarm is for system level. For the Vmux2100 Main Board clA (3) … |
Enumeration | .1.3.6.1.4.1.164.3.1.2.2.8.2.1.2 |
|
agnCnfgAlrPort
The alarm port. The following attributes apply for the alarm
code,slot and port selected. 200 = all = the attributes apply to all ports of the selected slot. When selected Slot is 'all', only 'all' or 'notApplicab… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.2.8.2.1.3 |
|
agnCnfgAlrMask
An attribute defining the desired Mask state of an alarm .
no - unmask (this command is not saved in agent's common database) noAndSave - unmask ; this command is saved in agent's common database yes - mask … |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.2.2.8.2.1.4 |
|
agnCnfgAlrInvert
An attribute defining the desired Invert state of an alarm .
no - not inverted. yes - inverted. For MP, it is not applicable for alarms that are currently OFF. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.2.2.8.2.1.5 |
|
agnCnfgAlrFilter
An attribute defining if Filter is desired for the alarm .
no - no filter. yes - filter activate. This filter is activated within a window of time defined by agnCnfgAlrFilterWindow. Its purpose is to av… |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.2.2.8.2.1.6 |
|
agnCnfgAlrFilterSet
This is a top threshold causing the alarm that passes it,
to be declared Set (ON) at the end of the respective window of time. - For alarms defined by default as state alarms (minor,major) this value will be in [%]. -… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.2.8.2.1.7 |
|
agnCnfgAlrFilterReset
This is a bottom threshold causing the alarm that does not
pass it, to be declared Reset (ON) at the end of the respective window of time. - For alarms defined by default as state alarms (minor,major) this value will … |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.2.8.2.1.8 |
|
agnCnfgAlrSeverity
An attribute defining desired severity of an alarm code
per slot/port |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.2.2.8.2.1.9 |
agnCnfgAlrReportTable
table.1.3.6.1.4.1.164.3.1.2.2.8.3
·
1 row entry
·
3 columns
This table enables the user to configure the desired Alarm Reports according to alarms severity.
An entry in table.
Indexes
agnAlarmsCmprVersion agnAlarmsCmprAlarmIdx
| Column | Syntax | OID |
|---|---|---|
|
agnCnfgAlrReportType
The alarm report type.
trap - traps will be sent only for alarms having the selected On/Off severity or higher. buffer - only alarms having the selected On/Off severity and higher, will be reported to th… |
Enumeration | .1.3.6.1.4.1.164.3.1.2.2.8.3.1.1 |
|
agnCnfgAlrStartReportOn
This object specifies the severity from which alarms will
be reported. Alarms having this severity or higher, will be reported. This object specifies the report severity only for alarms that turn to ON state. noReport … |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.2.2.8.3.1.2 |
|
agnCnfgAlrStartReportOff
This object specifies the severity from which alarms will
be reported. Alarms having this severity or higher, will be reported. This object specifies the report severity only for alarms that turn to OFF state. notAppl… |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.2.2.8.3.1.3 |
agnCT1E1RingTable
table.1.3.6.1.4.1.164.3.1.2.2.10
·
1 row entry
·
9 columns
Configuration of all T1/E1 Ring ML cards and ports. The write operation into the table objects is valid only for the TmpCnfg. A Slot/Port that does not participate in the T1/E1 Ring, will not exist in this table. A ML port that exists in this table, cannot exist at the same time in the IO Redundancy table (sysCRdnTable).
An Entry in table agnCT1E1RingTable
Indexes
agnAlrBufCmprVersion agnAlrBufCmprAlarmIdx
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
agnCT1E1RingCnfgIdx
This object indicates the Idx of the Cnfg(1..255) being
accessed ; Idx of 255 relates to the TmpCnfg. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.2.10.1.1 |
||||||||||||
|
agnCT1E1RingPrimeSlot
The slot number of the Primary card of the Ring Pair.
|
Enumeration | .1.3.6.1.4.1.164.3.1.2.2.10.1.2 |
||||||||||||
|
agnCT1E1RingPrimePort
The port number in the Primary Card.
For external ports, the value will be as that of the port in the card. Example: external-3 -> 3 external-4 -> 4 For internal ports, the value will be 100 + the port… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.2.10.1.3 |
||||||||||||
|
agnCT1E1RingSecSlot
The slot number of the Secondary card of the Ring Pair.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.2.2.10.1.4 |
||||||||||||
|
agnCT1E1RingSecPort
The port number in the Secondary Card.
For external ports, the value will be as that of the port in the card. Example: external-3 -> 3 external-4 -> 4 For internal ports, the value will be 100 + the po… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.2.10.1.5 |
||||||||||||
|
agnCT1E1RingRecTime
T1/E1 Ring Recovery Time (sec).
Valid Values: 1..99, 65535. 65535=NA. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.2.10.1.6 |
||||||||||||
|
agnCT1E1RingRowStatus
This parameter allows NMS to create/delete entries of this table.
The only possible supported RowStatus vaules are active (1) and destroy (6). |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.3.1.2.2.10.1.7 |
||||||||||||
|
agnCT1E1RingWTR
T1/E1 Ring Wait to Restore (sec).
Valid Values: 0..999, 65535. 65535=NA. When the value <> 65535, the value of agnCT1E1RingRecTime must be 65535. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.2.2.10.1.8 |
||||||||||||
|
agnCT1E1RingDualFailDetection
T1/E1 Ring - Dual Failure Detection enable/disable.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.2.2.10.1.9 |
agnCBuMlTable
table.1.3.6.1.4.1.164.3.1.2.2.12
·
1 row entry
·
9 columns
Configuration for Primary, Secondary and Third Link. These are used for Link Backup.
An Entry in table agnCBuMlTable
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
agnCBuMlCnfgIdx
This object indicates the Index of the Configuration database (1..255) being
accessed. Index of 255 relates to the Temporary Configuration. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.2.12.1.1 |
|
agnCBuMlRole
The Role of the Link. Primary Link is the Link that should usually work.
If the Primary Link fails, the data will go through the Secondary Link. If both Primary and Secondary Links fail, the data will go through the Thi… |
Enumeration | .1.3.6.1.4.1.164.3.1.2.2.12.1.2 |
|
agnCBuMlType
The Type of the Link.
For E1/T1 the Link can be Link A - e1T1a or Link B - e1T1b. For ETH-NET, eth (5) can be used. For ETH-NET/USER ethNetUser (6) can be used. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.2.2.12.1.3 |
|
agnCBuMlDefaultGateway
Default Gateway's IP Address.
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.3.1.2.2.12.1.4 |
|
agnCBuMlSubnetMask
The Link subnet mask.
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.3.1.2.2.12.1.5 |
|
agnCBuMlOamFrequency
Time in sec. between 2 OAM packets.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.2.12.1.6 |
|
agnCBuMlOamTimeoutCycles
No. of cycles the Link will send OAM packets without receiving a response
from the remote Link before switching to the Backup Link. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.2.12.1.7 |
|
agnCBuMlWaitToRestore
This object defines traffic recovery time (in milliseconds)
of the link after its recovery. This object is applicable only when Recovery Mode is revertive. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.2.2.12.1.8 |
|
agnCBuMlBfdSessionNum
This object defines the BFD (Bidirectional Forwarding Detection) session number of the link.
When no session exists or when N/A, the value will be 0. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.2.2.12.1.9 |
agnCQ50Table
table.1.3.6.1.4.1.164.3.1.2.2.13
·
1 row entry
·
5 columns
Table for the device Q50 parameters. Q50 is a Signaling protocol used between PBX devices. It is possible to control the initiation of calls using Q.50. This is useful for devices when there is a congestion.
An Entry in table agnCQ50Table
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
agnCQ50CnfgIdx
This object indicates the Index of the Configuration database (1..255) being
accessed. Index of 255 relates to the Temporary Configuration. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.2.13.1.1 |
|
agnCQ50StopCallsThresh
This object indicates the Bandwidth Threshold percent (%) above which
new Calls from the PBX will be disabled. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.2.13.1.2 |
|
agnCQ50DiscardPktThresh
This object indicates the Bandwidth Threshold percent (%) above which
voice packets will be discarded. Usually, the value selected should be higher than the value of agnCQ50StopCallsThresh. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.2.13.1.3 |
|
agnCQ50BlockNewModemVbdCallsThresh
This object indicates the Modem VBD Calls Threshold percent (%) above which
new modem calls will be rejected. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.2.13.1.4 |
|
agnCQ50BlockNewModemRelayCallsThresh
This object indicates the Modem Relay Calls Threshold percent (%) above which
new modem calls will be rejected. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.2.13.1.5 |
agnCmprTable
table.1.3.6.1.4.1.164.3.1.2.3.1
·
1 row entry
·
4 columns
A table.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
agnCmprTypIdx
This attribute indicates the Type of the Compressed being
referred. |
SNMPv2-SMIInteger32 Constraints: range: 0-255Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.3.1.1.1 |
||||||||||||||||||||||||||||||
|
agnCmprCnfgIdx
This attribute indicates the configuration to which the
Compressed information is related. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.3.1.1.2 |
||||||||||||||||||||||||||||||
|
agnCmprVersion
This attribute indicates the version of the internal format
of the Compressed data |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.3.1.1.3 |
||||||||||||||||||||||||||||||
|
agnCmprObj
This attribute is the compressed information itself.
|
OctetStringr/w | .1.3.6.1.4.1.164.3.1.2.3.1.1.4 |
agnDlciCmprTable
table.1.3.6.1.4.1.164.3.1.2.3.2
·
1 row entry
·
4 columns
A table.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
agnDlciCmprCnfgIdx
This attribute indicates the configuration to which the
Compressed information is related. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.3.2.1.1 |
||||||||||||||
|
agnDlciCmprVersion
This attribute indicates the version of the internal format
of the Compressed data |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.3.2.1.2 |
||||||||||||||
|
agnDlciCmprDlciIdx
This attribute indicates a unique identifier of the Dlci,
the compressed information relates to. The values are between 16 - 991. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.3.2.1.3 |
||||||||||||||
|
agnDlciCmprObj
This attribute is the compressed information itself.
|
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.2.3.2.1.4 |
agnAlarmsCmprTable
table.1.3.6.1.4.1.164.3.1.2.3.3
·
1 row entry
·
3 columns
A table.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
agnAlarmsCmprVersion
This attribute indicates the version of the internal
format of the Compressed data |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.3.3.1.1 |
||||
|
agnAlarmsCmprAlarmIdx
A unique number to identify an entry in the alarm status table
of the agent. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.3.3.1.2 |
||||
|
agnAlarmsCmprObj
This attribute is the compressed information itself.
|
OctetString Constraints: range: 1-10 |
.1.3.6.1.4.1.164.3.1.2.3.3.1.3 |
agnAlrBufCmprTable
table.1.3.6.1.4.1.164.3.1.2.3.4
·
1 row entry
·
3 columns
A table.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
agnAlrBufCmprVersion
This attribute indicates the version of the internal format of
the Compressed data |
SNMPv2-SMIInteger32 Constraints: range: 1-512Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.3.4.1.1 |
||||||||||||||||||||||||||||||
|
agnAlrBufCmprAlarmIdx
A unique number to identify an entry in the history alarms
buffer of the agent. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.3.4.1.2 |
||||||||||||||||||||||||||||||
|
agnAlrBufCmprObj
This attribute is the compressed information itself.
|
OctetString | .1.3.6.1.4.1.164.3.1.2.3.4.1.3 |
agnSCmprErrListTable
table.1.3.6.1.4.1.164.3.1.2.3.5
·
1 row entry
·
3 columns
A table.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
agnSCmprErrVersion
The version of the compressed data
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.3.5.1.1 |
||||||||
|
agnSCmprErrIdx
Unique number to identify an entry in the errors list table.
The maximum entry value cannot exceed the value of 'agnSNoOfSanityCheckErr'. |
SNMPv2-SMIInteger32 Constraints: range: 5-5Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.3.5.1.2 |
||||||||
|
agnSCmprErrObj
This attribute is a full text description of the error,
including: error code, slot and port numbers related to the code . |
OctetString Constraints: range: 5-5 |
.1.3.6.1.4.1.164.3.1.2.3.5.1.3 |
agnTsCmprTable
table.1.3.6.1.4.1.164.3.1.2.3.6
·
1 row entry
·
6 columns
A table.
An entry in table.
Indexes
agnCFlipCnfgIdx agnCFlipIdx
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
agnTsCmprVerIdx
This object indicates the version of the internal format
of the Compressed data. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.3.6.1.1 |
||||||
|
agnTsCmprCnfgIdx
This object indicates the configuration to which the
Compressed information is related. 255=temporary configuration. Set can be performed only to the temporary configuration. |
SNMPv2-SMIInteger32 Constraints: range: 1-10Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.3.6.1.2 |
||||||
|
agnTsCmprSlotIdx
This object indicates the Slot to which the
Compressed information is related. For MP-2100: IO-1..IO-12 = (5).. (16) For DXC-30 : IO-1..IO-15 = (5).. (19). NA=255. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.3.6.1.3 |
||||||
|
agnTsCmprPortIdx
This object indicates the Port within the Slot, to which the
Compressed information is related. For Port Index see each product's spec. |
SNMPv2-SMIInteger32 Constraints: range: 1-20Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.3.6.1.4 |
||||||
|
agnTsCmprPduIdx
This object indicates the PDU index within the same port.
That provides for the case when one PDU is not sufficient for all TS Assignment data of the same port. |
SNMPv2-SMIInteger32 Constraints: range: 1-10Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.3.6.1.5 |
||||||
|
agnTsCmprData
This object is the compressed information itself. It provides
information about all TSs of a port. |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.2.3.6.1.6 |
agnXCmprTable
table.1.3.6.1.4.1.164.3.1.2.3.7
·
1 row entry
·
8 columns
A table.
An entry in table.
Indexes
agnListDecodingType agnListDecodingCode
| Column | Syntax | OID | ||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
agnXCmprTypIdx
This attribute indicates the Type of the Compressed being
referred. One of the types is V5.1 Variant data. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.3.7.1.1 |
||||||||||||||||||||||||||||
|
agnXCmprVersion
This attribute indicates the version of the internal format of
the Compressed data. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.3.7.1.2 |
||||||||||||||||||||||||||||
|
agnXCmprIdx3
3rd index - can be used for any purpose according to the
agnXCmprTypIdx. Example: for V5.1 Variant, this attribute indicates the configuration to which the Compressed information is related. 255=temporary configuratio… |
SNMPv2-SMIInteger32 Constraints: range: 0-255Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.3.7.1.3 |
||||||||||||||||||||||||||||
|
agnXCmprIdx4
4th index - can be used for any purpose according to the
agnXCmprTypIdx. Example: for V5.1 Variant,this attribute indicates a unique number of the slot position where the card is inserted. Valid values: psA(1),psB… |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.3.7.1.4 |
||||||||||||||||||||||||||||
|
agnXCmprIdx5
5th index - can be used for any purpose according to the
agnXCmprTypIdx. Example: for V5.1 Variant,this attribute indicates a unique identifier of the port the compressed information relates to. Valid values: exPrt1 … |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.3.7.1.5 |
||||||||||||||||||||||||||||
|
agnXCmprIdx6
6th index - can be used for any purpose according to the
agnXCmprTypIdx. Example: for V5.1 Variant,this attribute indicates the Variant index. Valid values are: 0..127, 255 (= temp cnfg).Set can be performed only to … |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.3.7.1.6 |
||||||||||||||||||||||||||||
|
agnXCmprIdx7
7th index - can be used for any purpose according to the
agnXCmprTypIdx. Example: for V5.1 Variant,this attribute is not needed. Therefore, its value will be always 255=notApplicable. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.3.7.1.7 |
||||||||||||||||||||||||||||
|
agnXCmprObj
This attribute is the compressed information itself.
|
OctetStringr/w | .1.3.6.1.4.1.164.3.1.2.3.7.1.8 |
alrBufTable
table.1.3.6.1.4.1.164.3.1.2.4.1
·
1 row entry
·
7 columns
A table.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
alrBufIdx
This attribute indicates a unique number to identify this
entry |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.4.1.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
alrBufDescription
This entry is a unique text description of the alarm in the
buffer. The alarm description includes the following information: alarm code, slot id, card type, channel id , alarm text, alarm status, masked flag and event … |
OctetString | .1.3.6.1.4.1.164.3.1.2.4.1.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
alrBufCode
A code identifying the alarm of an entry in the alarm buffer
table. |
SNMPv2-SMIUnsigned32 Constraints: range: 0-991Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.2.4.1.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
alrBufSlot
The slot number this alarm refers to.
When the alarm refers to a system alarm, the value will be 'notApplicable(255)'. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.2.4.1.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
alrBufPort
The port number this alarm refers to.
If the port number is irrelevant to this alarm (if it is a system/card level alarm) the value will be 9999. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.2.4.1.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
alrBufSeverity
The severity of the alarm.
|
Enumeration Constraints: range: 1-991 |
.1.3.6.1.4.1.164.3.1.2.4.1.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
alrBufState
State of the alarm (On/Off).
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.2.4.1.1.7 |
agnCAgendaTable
table.1.3.6.1.4.1.164.3.1.2.5.1
·
1 row entry
·
3 columns
This table devides the week days into categories needed for DB flip consideration.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
agnCAgendaCnfgIdx
Active or Temporary Agenda Table.
Both configurations can be read but only the Temporary can be written to. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.2.5.1.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
agnCAgendaDayIdx
Day of week
|
Enumeration Constraints: range: 1-8 |
.1.3.6.1.4.1.164.3.1.2.5.1.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
agnCAgendaDayCategory
The Category of the Day
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.2.5.1.1.3 |
agnCFlipNetEventsTable
table.1.3.6.1.4.1.164.3.1.2.5.2
·
1 row entry
·
12 columns
This table holds the Net Events the MUX should trace
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
agnCFlipNetEventsCnfgIdx
Active or Temporary Net Events Table.
Both configurations can be read but only the Temporary can be written to. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.2.5.2.1.1 |
||||||||
|
agnCFlipNetEventIdx
Entry within the table
|
Integer32 | .1.3.6.1.4.1.164.3.1.2.5.2.1.2 |
||||||||
|
agnCFlipNetEventActive
Indicates if the entry is valid.
In order to Add/Modify parameters of an entry, this object should be set to Yes. In order to delete an entry, this object should be Set to No. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.2.5.2.1.3 |
||||||||
|
agnCFlipNetEventType
The Net Event type
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.2.5.2.1.4 |
||||||||
|
agnCFlipNetEventNo
The Net Event No. (Bit Index)
|
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.2.5.2.1.5 |
||||||||
|
agnCFlipNetEventSlot
The slot to which the net event relates .
Not applicable for time event |
Enumerationr/w Constraints: range: 1-2 |
.1.3.6.1.4.1.164.3.1.2.5.2.1.6 |
||||||||
|
agnCFlipNetEventPort
The port within the relevant slot.
Valid values: - extPrt1(1)..exPrt16(16) - notApplicable(100) - inPrt1(101)..inPrt84(184) |
SNMPv2-SMIInteger32r/w Constraints: range: 1-3Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.5.2.1.7 |
||||||||
|
agnCFlipNetEventISD
The time in seconds since the Net Event was reported as ON
until it is considered as ON. Not relevant for time events. |
Integer32r/w Constraints: range: 0-20 |
.1.3.6.1.4.1.164.3.1.2.5.2.1.8 |
||||||||
|
agnCFlipNetEventOSD
The time in seconds since the net event was reported as OFF
until it is considered as OFF. Not relevant for time events. |
Integer32r/w Constraints: range: 0-30 |
.1.3.6.1.4.1.164.3.1.2.5.2.1.9 |
||||||||
|
agnCFlipNetEventDayType
The time event relates to all days defined in this category in
the agnCAgendaTable. Applicable only for time event |
Enumerationr/w Constraints: range: 0-30 |
.1.3.6.1.4.1.164.3.1.2.5.2.1.10 |
||||||||
|
agnCFlipNetEventStartTime
The time event will be activated at this time.
The format is hh:mm. |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.2.5.2.1.11 |
||||||||
|
agnCFlipNetEventEndTime
The time event will be deactivated at this time.
The format is hh:mm. |
OctetStringr/w | .1.3.6.1.4.1.164.3.1.2.5.2.1.12 |
agnCFlipTable
table.1.3.6.1.4.1.164.3.1.2.5.3
·
1 row entry
·
6 columns
The DB Flip Decisions Table
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
agnCFlipCnfgIdx
Active or Temporary Flip Decisions Table.
Both configurations can be read but only the Temporary can be written to. |
Enumeration | .1.3.6.1.4.1.164.3.1.2.5.3.1.1 |
||||||||||||||||||||||||||||||
|
agnCFlipIdx
Entry number within the table
|
Integer32 Constraints: range: 1-7 |
.1.3.6.1.4.1.164.3.1.2.5.3.1.2 |
||||||||||||||||||||||||||||||
|
agnCFlipActive
Indicates if the entry is valid.
In order to Add/Modify parameters of an entry this object should be Set to Yes. In order to delete an entry, this object should be Set to No. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.2.5.3.1.3 |
||||||||||||||||||||||||||||||
|
agnCFlipLogicalExp
A logical expression composed of events numbers (which were
configured in the 'AgnCFlipNetEvantsTable') and logical operators ('|', '&', '!', '(', ')') between them. e.g - (1 & !2) | (121 & 230) |
OctetStringr/w Constraints: range: 1-7 |
.1.3.6.1.4.1.164.3.1.2.5.3.1.4 |
||||||||||||||||||||||||||||||
|
agnCFlipDbNo
The ID of the required DB
|
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.2.5.3.1.5 |
||||||||||||||||||||||||||||||
|
agnCFlipDiscardDe
Indicates whether the Mux should start discarding
all DE. (MP3000 Only). |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.2.5.3.1.6 |
agnListDecodingTable
table.1.3.6.1.4.1.164.3.1.2.7.1
·
1 row entry
·
7 columns
A decoding table . For each type of list, a description is given for each existing code.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
agnListDecodingType
The type of list the decoding data refers to.
alr - Alarms list sanity - Sanity Check Error list. counter - Counter type of ifPerfCounterType |
Enumeration | .1.3.6.1.4.1.164.3.1.2.7.1.1.1 |
||||
|
agnListDecodingCode
The specific code for which decoding is needed.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.7.1.1.2 |
||||
|
agnListDecodingDescription
The description fitting the specific code and type of list
required. |
OctetString | .1.3.6.1.4.1.164.3.1.2.7.1.1.3 |
||||
|
agnListDecodingDefState
This object is applicable only for agnListDecodingType=alr.
It reports the default state/severity of each alarm. User can change the severity of the alarms defined by this default via the agnListDecodingSeverity object. |
Enumeration | .1.3.6.1.4.1.164.3.1.2.7.1.1.4 |
||||
|
agnListDecodingSeverity
This object is applicable only for agnListDecodingType=alr.
It enables the user to select a severity for each alarm. The severity is set per alarm code (same for all slots/ports using this code). event - can be set only… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.2.7.1.1.5 |
||||
|
agnListDecodingAcmRelaySlt
This object indicates the ACM slot, desired for outbound relay
(report) for the selected alarm. In the ?004 Unit the entries io6(10)..io12(16) are not valid. none - when agnListDecodingType=alr AND the selected … |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.2.7.1.1.6 |
||||
|
agnListDecodingAcmRelayPrt
This object indicates the ACM port within the slot, desired for outbound relay
(report) for the selected alarm. notApplicable - when agnListDecodingType=sanity OR when agnListDecodingAcmRelaySlt=notAppli… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.2.7.1.1.7 |
agnDlciTable
table.1.3.6.1.4.1.164.3.1.2.8.1
·
1 row entry
·
17 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
agnDlciCnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg. |
Integer32 | .1.3.6.1.4.1.164.3.1.2.8.1.1.1 |
||||||||||||||||||
|
agnDlciLSltIdx
This attribute indicates a unique slot position where
the card is inserted. This is the Source Slot of the DLCI. vs=Voice Switching In the ?004 Unit the entries io6(10)..io16) are not valid. For ISDN BRI ports of … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.2.8.1.1.2 |
||||||||||||||||||
|
agnDlciLPrtIdx
This attribute indicates a unique external or internal port number,
including linkSelector or encapsulator. This is the Source Port of the DLCI. 100=noConnect (for voice switching) LPrtIdx is defined according one… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.8.1.1.3 |
||||||||||||||||||
|
agnDlciLIdx
This attribute indicates a unique index for each possible
used DLCI(16..991). This is the Source Side of the DLCI. 0=notApplicable (for voice switching) LIdx is defined according one of the following possiblities: 1. LS… |
Integer32 | .1.3.6.1.4.1.164.3.1.2.8.1.1.4 |
||||||||||||||||||
|
agnDlciHSltIdx
This attribute indicates a unique slot position In the Mux
where the DLCI is routed to - Destination Slot. For ISDN BRI ports of MX300/30 units: io1(5) = isdn1(5) and io2(6) = isdn2(6) In the ?004 Unit the entries i… |
Enumeration | .1.3.6.1.4.1.164.3.1.2.8.1.1.5 |
||||||||||||||||||
|
agnDlciHPrtIdx
This attribute indicates a unique port number where the DLCI is
routed to - Destination Port. |
SNMPv2-SMIInteger32 Constraints: range: 1-5Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.8.1.1.6 |
||||||||||||||||||
|
agnDlciHIdx
This attribute indicates a unique internal connection DLCI
number where the Source DLCI is routed to - the Destination Side of the DLCI. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.2.8.1.1.7 |
||||||||||||||||||
|
agnDlciTxBc
This attribute indicates a unique Tx committed bandwidth on
the user transmit line or at the port receive line. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.2.8.1.1.8 |
||||||||||||||||||
|
agnDlciTxBe
This attribute indicates a unique Tx excess bandwidth on the
user transmit line or at the port receive line. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.2.8.1.1.9 |
||||||||||||||||||
|
agnDlciRxBc
This attribute indicates a unique Rx committed bandwidth on
the user receive line or at the port transmit line. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.2.8.1.1.10 |
||||||||||||||||||
|
agnDlciRxBe
This attribute indicates a unique Rx excess bandwidth on the
user receive line or at the port transmit line. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.2.8.1.1.11 |
||||||||||||||||||
|
agnDlciPriority
This attribute indicates a unique priority of the pcv.
1 is the lowest priority and 7 is the highest priority. |
Integer32r/w | .1.3.6.1.4.1.164.3.1.2.8.1.1.12 |
||||||||||||||||||
|
agnDlciStatus
This attribute indicates the status of the pvc. The status is
disconnected(1) when one of the sides is programmed as not connected |
Enumeration Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.1.2.8.1.1.13 |
||||||||||||||||||
|
agnDlciSpoofing
This object refers to sending of RIP messages:
- yes : RIP messages will be sent ONLY if there is a change in the Net. - no : RIP messages will be always sent. This object is relevant only when one side of the … |
Enumerationr/w Constraints: range: 1-5 |
.1.3.6.1.4.1.164.3.1.2.8.1.1.14 |
||||||||||||||||||
|
agnDlciFunnelEnable
This object selects Funnel activation:
- disabled: Funnel operation will be disabled. The agnDlciTxBe and agnDlciTxBc values are not used for funneling. - enabled : Funnel operation … |
Enumerationr/w Constraints: range: 0-12 |
.1.3.6.1.4.1.164.3.1.2.8.1.1.15 |
||||||||||||||||||
|
agnDlciRoutingProtocol
This object is relevant only when one side of the DLCI is a CL-NMS interface.
It defines which Routing Protocol will be used for management via CL-NMS port. notApplicable will be used for all slots but CL. rip is a prop… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.2.8.1.1.16 |
||||||||||||||||||
|
agnDlciRowStatus
This attribute allows to create/delete a row in this table.
For creating a row, the NMS should set agnRowStatus.255.id2.id3.id4.id5.id6.id7 = active(1). For destroying a row, the NMS should set: agnRowStatus.255… |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.3.1.2.8.1.1.17 |
agnVoiceSwConfTable
table.1.3.6.1.4.1.164.3.1.2.9.1
·
1 row entry
·
7 columns
MXcess Configuration for Voice Switching.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
agnVoiceSwConfIdx
Active or Temporary Table.
Both configurations can be read but only the Temporary can be written to. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.2.9.1.1.1 |
||||||||||||||||||||||||||||||||||||
|
agnVoiceSwConfZoneId
1 or 2 digits, (0-9)(1-9).
|
OctetStringr/w | .1.3.6.1.4.1.164.3.1.2.9.1.1.2 |
||||||||||||||||||||||||||||||||||||
|
agnVoiceSwConfNodeId
1, 2 or 3 digits, (1-9),(0-9),(0-9).
|
OctetStringr/w Constraints: range: 1-32 |
.1.3.6.1.4.1.164.3.1.2.9.1.1.3 |
||||||||||||||||||||||||||||||||||||
|
agnVoiceSwConfNoOfHops
Number of hops the frame will go through the net before deciding to discard
the frame (like time-to-live in IP). 0 = notApplicable Default=20 . |
Integer32r/w | .1.3.6.1.4.1.164.3.1.2.9.1.1.4 |
||||||||||||||||||||||||||||||||||||
|
agnVoiceSwConfSidt
SIDT: Short Inter Digit Timeout used as timer (in sec.) between digits
after routing is completed. The timeout indicates end of dialing and the call can then be setup. 0 = notApplicable Default=2 sec. |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.2.9.1.1.5 |
||||||||||||||||||||||||||||||||||||
|
agnVoiceSwConfLidt
LIDT: Long Inter Digit Timeout used as timer between digits before routing
is completed. If no digits were dialed and LIDT expired then the user will get an error tone and the call will be disconnected. 0… |
Integer32r/w | .1.3.6.1.4.1.164.3.1.2.9.1.1.6 |
||||||||||||||||||||||||||||||||||||
|
agnVoiceSwConfDialPlan
This is the Dialing Plan method that will be used in the Voice Switching.
Static Dialing Plan - Routing is defined by the current device Zone and Node ID in the Network. Static Dialing Plan Plus - … |
Enumerationr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.1.2.9.1.1.7 |
agnVoiceSwConfRtTable
table.1.3.6.1.4.1.164.3.1.2.9.2
·
1 row entry
·
11 columns
Routing Table for Voice Switching.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
agnVoiceSwConfRtDbId
Active or Temporary Table.
Both configurations can be read but only the Temporary can be written to. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.2.9.2.1.1 |
||||||||||||||||||||||||||||||
|
agnVoiceSwConfRtIdx
The Index of the row.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.9.2.1.2 |
||||||||||||||||||||||||||||||
|
agnVoiceSwConfRtDigits
Dialed digits: Series of digits 0...9, '*', '#' or '%'.
The '*' and '#' can have many uses according to the user's decision. For example, they can be used as part of the Dialed Number, they exist on the phone number pan… |
OctetStringr/w | .1.3.6.1.4.1.164.3.1.2.9.2.1.3 |
||||||||||||||||||||||||||||||
|
agnVoiceSwConfRtAction
Action that the system should perform for the digits:
agnVoiceSwConfRtDigits. The action that is allowed depends on the Dialing Plan. Here is the list of the allowed actions: For Static Dialing Plan - zone, node, in, sh… |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.2.9.2.1.4 |
||||||||||||||||||||||||||||||
|
agnVoiceSwConfRtData
This field is relevant for actions hgr(6), and rep(8), numDigDP(11)
and contains the following information: For hgr - the number of the Hunt Group. For rep - the number of digits to be replaced with. For numDigDP - the … |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.2.9.2.1.5 |
||||||||||||||||||||||||||||||
|
agnVoiceSwConfRtSlot
Routing Slot- Relevant for actions zone(2), node(3), shortDialing(4),
route(12), ext(13). |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.2.9.2.1.6 |
||||||||||||||||||||||||||||||
|
agnVoiceSwConfRtPort
Routing Port- Relevant for actions zone(2), node(3), shortDialing(4),
route(12), ext(13). 100=noConnect (for non-routing case). |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.9.2.1.7 |
||||||||||||||||||||||||||||||
|
agnVoiceSwConfRtDlci
Routing DLCI- Relevant for actions zone(2), node(3), shortDialing(4),
route(12), ext(13). Valid values: 0=notApplicable (for non-routing case). 1, 16..991 |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.9.2.1.8 |
||||||||||||||||||||||||||||||
|
agnVoiceSwConfRtRowStatus
Status of the row for creating/deleting entries in the table.
The only possible supported RowStatus vaules are active (1), notInService (2), notReady(3), createAndGo(4), createAndWait(5) and destroy(6). |
SNMPv2-TCRowStatusr/w Enumerated Values:
Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.3.1.2.9.2.1.9 |
||||||||||||||||||||||||||||||
|
agnVoiceSwConfRtMaxCalls
Maximum no. of simultaneous voice calls that are allowed in the direction
defined by the current entry. Default=0 (No Limit). |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.9.2.1.10 |
||||||||||||||||||||||||||||||
|
agnVoiceSwConfRtPriority
This attribute indicates a unique priority of the Voice Switching Route.
1 is the lowest priority and 7 is the highest priority. 0 means N/A |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.9.2.1.11 |
agnVoiceSwConfHGTable
table.1.3.6.1.4.1.164.3.1.2.9.5
·
1 row entry
·
7 columns
Table of Hunt Groups.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
agnVoiceSwConfHGdbIdx
Active or Temporary Table.
Both configurations can be read but only the Temporary can be written to. |
Enumeration | .1.3.6.1.4.1.164.3.1.2.9.5.1.1 |
||||||
|
agnVoiceSwConfHGIdx
For Vmux-300 devices -
This object represents a combination of - Hunt Group number and Extension number OR - Port number and Extension number. For other devices (e.g. MXcess, MP-2100H) - There may be up t… |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.9.5.1.2 |
||||||
|
agnVoiceSwConfHGConnect
This attribute indicates whether the hunt group should be
considered in any of the mux algorithms. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.2.9.5.1.3 |
||||||
|
agnVoiceSwConfHGExt
This is the extension number of the hunt group.
0 is for not valid. The allowed range is 10 - 99. |
Integer32r/w | .1.3.6.1.4.1.164.3.1.2.9.5.1.4 |
||||||
|
agnVoiceSwConfHGExtString
This is the extension string of the hunt group.
This string is a combination of digits, * and #. |
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.1.2.9.5.1.5 |
||||||
|
agnVoiceSwConfHGUserParams
This object indicates the User's parameters.
|
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.1.2.9.5.1.6 |
||||||
|
agnVoiceSwConfHGStatus
This object enables the user to create/delete entries in this table.
Its usage for values (1)..(6) should be identical to RowStatus SYNTAX. notApplicable(255) - should be used when the table is static … |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.2.9.5.1.7 |
agnSigProfileTable
table.1.3.6.1.4.1.164.3.1.2.10.1
·
1 row entry
·
6 columns
- For products supporting more than one configuration, the write operation into the Table is valid only to the TmpCnfg entry. - For products that do not support configurations, the write operation into the Table will be to agnSigProfileCnfgIdx=1. The table includes signaling profile parameters for Legacy Profiles.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
agnSigProfileCnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg. For products supporting more than one configuration,the write operation is valid only to the TmpCnfg. For Gmux2000 t… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.10.1.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
agnSigProfileIdx
This attribute indicates the Signaling Profile (1..5).
For MP-104/204, only Profile=1 will exist. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.2.10.1.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
agnSigProfileRxTx
This attribute indicates if the following objects refer to:
Rx or Tx translation. Rx : ML->IO Tx : IO->ML . For MP-104/204, that means: Rx : Signaling to FXS CH Tx : Signaling to E1 Link. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.2.10.1.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
agnSigProfileABCD
For MP-2100/MP-2200 and for MP-104/204 from R2:
This object represents 6 parameters, by 3 Octets : Busy Code-MSB nibble, - applicable only for Rx translation Idle Code- nibble, - applicable only for Rx translation … |
OctetStringr/w Constraints: range: 0-255 |
.1.3.6.1.4.1.164.3.1.2.10.1.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
agnSigProfileEcanActSignal
Echo Canceller Activation Signal.
This object specifies which BIT (A, B, C, or D) and which value (0 or 1) will be used for the echo canceller activation. The inverse value will cause the deactivation of the echo cancel… |
Enumerationr/w Constraints: range: 0-255 |
.1.3.6.1.4.1.164.3.1.2.10.1.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
agnSigProfileEcanRespDelay
Echo Canceller Response Delay.
This object specifies the response delay in msec for the activation/deactivation of the echo canceller. The value should be in multiples of 100 msec: 100, 200, 300, ...2000. |
SNMPv2-SMIUnsigned32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.2.10.1.1.6 |
agnSigProfTable
table.1.3.6.1.4.1.164.3.1.2.10.2
·
1 row entry
·
4 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry. This is the general table of signaling profiles.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
agnSigProfCnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg. The write operation is valid only to the TmpCnfg. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.2.10.2.1.1 |
||||||||||||
|
agnSigProfIdx
This attribute indicates the Signaling Profile (1..5).
|
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.2.10.2.1.2 |
||||||||||||
|
agnSigProfName
Profile Name given by user.
|
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.2.10.2.1.3 |
||||||||||||
|
agnSigProfType
Profile Type.
legacy - usual signaling. The parameters for the Legacy Profiles are detailed in the agnSigProfileTable, above. r2Cas - R2 signaling. The parameters for the R2 Profiles are detailed in … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.2.10.2.1.4 |
agnTsTable
table.1.3.6.1.4.1.164.3.1.2.11.1
·
1 row entry
·
11 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
agnTsCnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg. |
Integer32 | .1.3.6.1.4.1.164.3.1.2.11.1.1.1 |
||||||||||||||||||||||||||||||||
|
agnTsSltIdx
This attribute indicates a unique slot position where
the card is inserted. |
Enumeration | .1.3.6.1.4.1.164.3.1.2.11.1.1.2 |
||||||||||||||||||||||||||||||||
|
agnTsPrtIdx
This attribute indicates a unique external or internal port number.
For MP-2100, the valid values will be (for MLs only): - exPrt1(1)..exPrt8(8) - inPrt1(101)..inPrt8(108). For other products' index see their specifi… |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.11.1.1.3 |
||||||||||||||||||||||||||||||||
|
agnTsIdx
This attribute indicates a unique index for TS (Time-Slot).
- for T1 ports - 1..24, Fbit(25) - for E1 ports - 1..31 - for HDSL ports - 1..32 ; 32 will represent TS0. |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.164.3.1.2.11.1.1.4 |
||||||||||||||||||||||||||||||||
|
agnTsBitIdx
This attribute indicates a unique index for the Bit
of each TS (Time-Slot). 1..8 - Bit 1.. Bit 8 255 - notApplicable This object is applicable only in Split Time-Slot cases. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.11.1.1.5 |
||||||||||||||||||||||||||||||||
|
agnTsConSltIdx
This attribute indicates a unique slot position In the Mux
where the TS is routed to. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.2.11.1.1.6 |
||||||||||||||||||||||||||||||||
|
agnTsConPrtIdx
This attribute indicates a unique port id the TS is
routed to. notApplicable - when agnTsType=mng or spare For MP-2100/2200: exPrt1 (1) .. exPrt16 (16) , notApplicable(100), inPrt1 (101) .. inPrt48 (148). For… |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.11.1.1.7 |
||||||||||||||||||||||||||||||||
|
agnTsConIdx
This attribute indicates a unique TS number the Src TS is
routed to. Valid values: - for T1 ports - 1..24, Fbit(25) - for E1 ports - 1..31 - for HDSL ports - 1..32 ; 32 will represent TS0. - notApplicable - 255 (fo… |
Integer32 | .1.3.6.1.4.1.164.3.1.2.11.1.1.8 |
||||||||||||||||||||||||||||||||
|
agnTsType
Time-Slot Type - regarding its connection and media type.
voice, data, vcMP - connected and the media is specified. mng - management. This TS is Dedicated to Management (not disconnected, but not connected to anot… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.2.11.1.1.9 |
||||||||||||||||||||||||||||||||
|
agnTsRowStatus
This attribute allows to create/delete a row in this table.
For creating a row, the NMS should set agnTsRowStatus.255.id2.id3.id4.id5.id6.id7.id8 = active(1). For destroying a row, the NMS should set: agnTsRowStatus.255… |
SNMPv2-TCRowStatusr/w Enumerated Values:
Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.3.1.2.11.1.1.10 |
||||||||||||||||||||||||||||||||
|
agnTsDirection
Direction of the connection. This parameter is especially important
when in MP a Selected Port is connected to a Connected Port that has no TSs, so it doesn't appear in the TS Assignment for the first 5 indexes. notApp… |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.2.11.1.1.11 |
systemVoiceTable
table.1.3.6.1.4.1.164.3.1.2.12.1
·
1 row entry
·
13 columns
General Parameters for voice - system level.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
systemVoiceConfIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed - Active or Temporary Configurations. Idx 255 relates to the temporary TmpCnfg. All configurations can be read but only the Temporary can be written … |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.12.1.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
systemVoiceNationalTone
Tone Characteristics (Amplitude, Frequency, delays etc.).
These characteristics are defined according to the country. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.2.12.1.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
systemVoicePacketRate
This object indicates the G.729 and G.711 Coders
transmitted Packet Rate in milliseconds. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.2.12.1.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
systemVoiceFaxSupport
This object allows the user to Disable/Enable Fax support.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.2.12.1.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
systemVoiceFaxRate
This object indicates the Fax Rate limit.
It is irrelevant when Fax support is NA or disabled. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.2.12.1.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
systemVoiceModemSupport
This object allows the user to Disable/Enable Modem support.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.2.12.1.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
systemVoiceCoderAndRate
This object indicates the Coder and Rate for the Voice Compression.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.2.12.1.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
systemVoiceEchoCanceler
This object indicates the Echo Canceler activation.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.2.12.1.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
systemVoiceTxGain
This object indicates the Transmit Gain (volume) in dB.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.2.12.1.1.9 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
systemVoiceDtmfRelayMethod
This object indicates the DTMF Relay Method
that is used to transmit DTMF tones. rfc2833(1) - inband DTMF relay according to RFC-2833. sipInfo(2) - out of band DTMF relay using SIP INFO method. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.2.12.1.1.10 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
systemVoiceDtmfRelayRxPayloadType
This object indicates the Rx Payload Type
for DTMF relay RTP packets. It is relevant only when DTMF Relay Method is RFC-2833. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.2.12.1.1.11 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
systemVoiceDtmfRelayPayloadTypeNeg
This object indicates whether Payload Type Negotiation is used
(according to RFC-2833) or not. It is relevant only when DTMF Relay Method is RFC-2833. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.2.12.1.1.12 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
systemVoiceDtmfRelayTxPayloadType
This object indicates the Tx Payload Type
for DTMF relay RTP packets. It is relevant only when the Payload Type Negotiation is disabled. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.2.12.1.1.13 |
systemVoiceCoderTable
table.1.3.6.1.4.1.164.3.1.2.12.2
·
1 row entry
·
3 columns
Voice Coders table.
An entry in Voice Coders table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
systemVoiceCoderConfIdx
The first index of the table.
This object might represent the Configuration Index (1..100) being accessed; Index=255 relates to the TmpCnfg. For devices with multiple configurations, Set is permitted to T… |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.2.12.2.1.1 |
|
systemVoiceCoderPriority
This object indicates the Coder's Priority.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.2.12.2.1.2 |
|
systemVoiceCoderCoderAndRate
This object indicates the Coder and Rate for the Voice Compression.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.2.12.2.1.3 |
mdlSInstTable
table.1.3.6.1.4.1.164.3.1.3.1.1
·
1 row entry
·
12 columns
A table.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
mdlSInstSltIdx
A unique number to identify a slot position in the mux.
In the ?004 Unit the entries PsB(2),ClB(4),io6(10)..io(16) are not valid. For the Vmux2100 Main Board clA (3) is used. |
Enumeration | .1.3.6.1.4.1.164.3.1.3.1.1.1.1 |
||||||||||||||||||||||||||||||||||||
|
mdlSInstCardType
This attribute indicates the type of card installed
in the specific slot position. Only PS cards are possible in the PS slots. Only CL cards are possible in the CL slots. Only IO cards are possible in the IO slots. |
Enumeration | .1.3.6.1.4.1.164.3.1.3.1.1.1.2 |
||||||||||||||||||||||||||||||||||||
|
mdlSHwVersion
This attribute indicates the Hardware version of the
installed card in the specific slot position. |
OctetString | .1.3.6.1.4.1.164.3.1.3.1.1.1.3 |
||||||||||||||||||||||||||||||||||||
|
mdlSSwVersion
This attribute indicates the Software version of the
installed card in the specific slot position. |
OctetString Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.3.1.1.1.4 |
||||||||||||||||||||||||||||||||||||
|
mdlSAlrStatus
Indicates the alarm state at module level, i.e. lower level
(port alarms) status is not included. This attribute will be set to: critical(7) - when there is at least one active (state ON) critical alar… |
Enumeration | .1.3.6.1.4.1.164.3.1.3.1.1.1.5 |
||||||||||||||||||||||||||||||||||||
|
mdlSAlrStatusAll
Indicates the alarm state in the module-all level, i.e. lower level
(port alarms) included. This attribute will be set to: critical(7) - when there is at least one active (state ON) critical alarm, … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.3.1.1.1.6 |
||||||||||||||||||||||||||||||||||||
|
mdlSMaskedAlrStat
Indicates the alarm state at module level, [i.e. lower level
(port alarms) status is not included],including Masked alarms. This attribute will be set to: critical(7) - when there is at least one active (state ON) … |
Enumeration | .1.3.6.1.4.1.164.3.1.3.1.1.1.7 |
||||||||||||||||||||||||||||||||||||
|
mdlSMaskedAlrStatAll
Indicates the alarm state in the module-all level, i.e. lower level
(port alarms) included, including Masked alarms. This attribute will be set to: critical(7) - when there is at least one active (state ON) … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.3.1.1.1.8 |
||||||||||||||||||||||||||||||||||||
|
mdlSTstStatusAll
This attribute will be set to on(3) when there is at least
one test in progress on a channel of the card, otherwise the value will be off(2). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.3.1.1.1.9 |
||||||||||||||||||||||||||||||||||||
|
mdlSClearAlrCmd
Setting this command to ON, enforces a clear of all the
alarms in the given slot, excluding alarms of port level. The clear operation will not be applied for masked/inverted alarms. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.3.1.1.1.10 |
||||||||||||||||||||||||||||||||||||
|
mdlSClearAllAlrCmd
Setting this command to ON, enforces a clear of all the
alarms in the given slot, including all its ports alarms. The clear operation will not be applied for masked/inverted alarms. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.3.1.1.1.11 |
||||||||||||||||||||||||||||||||||||
|
mdlSTemperature
Temperature of the card, in Celsius degrees.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.3.1.1.1.12 |
mdlSAlrTable
table.1.3.6.1.4.1.164.3.1.3.1.2
·
1 row entry
·
9 columns
The list of card agent alarms ; includes also an alarm indicating existence of alarms on its ports if there are any.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
mdlSAlrIdx
A unique number to identify an entry in the alarm status table.
Users should use the get next function to read this table because the indexes are not consecutive. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.3.1.2.1.1 |
||||||
|
mdlSAlrSltIdx
This attribute indicates the desired slot position.
In the ?004 Unit the entries PsB(2),ClB(4),io6(10)..io12(16) are not valid. For the Vmux2100 Main Board clA (3) is used. |
Enumeration | .1.3.6.1.4.1.164.3.1.3.1.2.1.2 |
||||||
|
mdlSAlrCodeDescription
This attribute is a full text description of the alarm .
The alarm description includes the following information: alarm code, alarm text, alarm severity, Masked or Inverted flag and counter. |
OctetString Constraints: range: 0-255 |
.1.3.6.1.4.1.164.3.1.3.1.2.1.3 |
||||||
|
mdlSAlrCode
A code identifying the alarm of an entry in the alarm status
table at card level. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.3.1.2.1.4 |
||||||
|
mdlSAlrSeverity
The severity of the alarm.
|
Enumeration | .1.3.6.1.4.1.164.3.1.3.1.2.1.5 |
||||||
|
mdlSAlrState
State of the alarm.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.3.1.2.1.6 |
||||||
|
mdlSAlrCounter
A counter - how many times the alarm occured since last
clear operation. ON and OFF Alarm will be counted separately. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.3.1.2.1.7 |
||||||
|
mdlSAlrMask
Alarm mask : on/off.
|
Enumeration | .1.3.6.1.4.1.164.3.1.3.1.2.1.8 |
||||||
|
mdlSAlrInvert
Alarm invert : on/off.
|
Enumeration | .1.3.6.1.4.1.164.3.1.3.1.2.1.9 |
mdlCPrgTable
table.1.3.6.1.4.1.164.3.1.3.2.1
·
1 row entry
·
9 columns
A table.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
mdlCCnfgIdx
This attribute indicates the Idx of the Cnfg(1..100) being
referred. Value 255 specifies the TmpCnfg |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.164.3.1.3.2.1.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlCSltIdx
This attribute indicates a unique number of the slot
position where the card is inserted. In the ?004 Unit the entries psB(2),clB(4),io6(10)..io(16) are not valid. |
Enumeration | .1.3.6.1.4.1.164.3.1.3.2.1.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlCPrgCardType
This attribute indicates the type of card assigned to the
specific slot in the common configuration. This object is identical in all the configurations (1..100). Only the TmpCnf(255) may have different value. The write … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.3.2.1.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlCNoOfExternPrt
Number of external ports in the programmed card of the
specific slot position |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.3.2.1.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlCNoOfInternPrt
Number of internal ports in the programmed card of the
specific slot position. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.3.2.1.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlCWorkMode
Working mode of the card.
The user may configure the card to work in a stand alone mode or integrated with the device. Example for use in MHS-IP cards: - standAlone - in this mode, the … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.3.2.1.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlCDhcpClientEnable
Enable/Disable the feature of DHCP Client for the selected card.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.3.2.1.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlCRdnExists
This object indicates whether any port of the programmed card is
configured to be part of a Redundancy/APS pair. If at least one port of the programmed card is configured to be part of a Redundancy/APS pair, the value w… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.3.2.1.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlCInterfaces
Octet string which indicates 'present' interfaces in card.
Each '0' bit stands for non-present interface. Each '1' bit stands for present interface. For ASMi54C card of LRS-102 and MP-4100 notPresent in… |
OctetString | .1.3.6.1.4.1.164.3.1.3.2.1.1.9 |
mdlCmprTable
table.1.3.6.1.4.1.164.3.1.3.3.1
·
1 row entry
·
5 columns
A table.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
mdlCmprTypIdx
This attribute indicates the Type of the Compressed being
referred. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.3.3.1.1.1 |
||||||||||||
|
mdlCmprCnfgIdx
This attribute indicates the configuration to which the
Compressed information is related. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.3.3.1.1.2 |
||||||||||||
|
mdlCmprVersion
This attribute indicates the version of the internal format
of the Compressed data |
SNMPv2-SMIInteger32 Constraints: range: 0-899Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.3.3.1.1.3 |
||||||||||||
|
mdlCmprSltIdx
This attribute indicates a unique number of the slot
position where the card is inserted. In the ?004 Unit the entries psB(2),clB(4),io6(10)..io(16) are not valid. |
Enumeration | .1.3.6.1.4.1.164.3.1.3.3.1.1.4 |
||||||||||||
|
mdlCmprObj
This attribute is the compressed information itself.
|
OctetStringr/w | .1.3.6.1.4.1.164.3.1.3.3.1.1.5 |
mdlAlarmsCmprTable
table.1.3.6.1.4.1.164.3.1.3.3.2
·
1 row entry
·
4 columns
A table.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
mdlAlarmsCmprVersion
This attribute indicates the version of the internal format
of the Compressed data |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.3.3.2.1.1 |
|
mdlAlarmsCmprAlarmSlot
This attribute indicates the desired slot position.
In the ?004 Unit the entries PsB(2),ClB(4),io6(10)..io(16) are not valid. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.3.3.2.1.2 |
|
mdlAlarmsCmprAlarmIdx
A unique number to identify an entry in the alarm status table
of the agent. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.3.3.2.1.3 |
|
mdlAlarmsCmprObj
This attribute is the compressed information itself.
|
OctetStringr/w | .1.3.6.1.4.1.164.3.1.3.3.2.1.4 |
prtSInstTable
table.1.3.6.1.4.1.164.3.1.4.1.1
·
1 row entry
·
17 columns
A table.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtSInstSltIdx
This attribute indicates a unique number to identify the
slot where the card is inserted. In the ?004 Unit the entries io6(10)..io(16) are not valid. For the Vmux2100 Main Board clA (3) is used. |
Enumeration | .1.3.6.1.4.1.164.3.1.4.1.1.1.1 |
||||||||||||||||||||||||||
|
prtSInstPrtIdx
This attribute indicates a unique number to identify a port
in a specific card. The valid ports depend on the installed card: the valid external ports (interfaces) are (1..mdlCNoOfExternPrt) if any, and the valid intern… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.4.1.1.1.2 |
||||||||||||||||||||||||||
|
prtSInstPrtType
This attribute describes the type of the designated port.
In MX 3000 only external & internal options are used. All the other options are only for MX 30/300 which need special handling. In order to support interface typ… |
Enumeration | .1.3.6.1.4.1.164.3.1.4.1.1.1.3 |
||||||||||||||||||||||||||
|
prtSInstIfIndex
This attribute indicates the unique interface number
assigned to the port. The specific interface of this attribute is the same as the interface identified by the value of ifindex in MIB-II.If there is no interface f… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.4.1.1.1.4 |
||||||||||||||||||||||||||
|
prtSActiveStatus
This attribute describes the activity status of the port.
unknown(1) indicates that the information is not supported. notUsed(2) indicates that the ch is not connected according to the active config. offLine(… |
Enumeration | .1.3.6.1.4.1.164.3.1.4.1.1.1.5 |
||||||||||||||||||||||||||
|
prtSAlrStatus
Indicates the alarm state in the port(ch) agent level.
This attribute will be set to: critical(7) - when there is at least one active (state ON) critical alarm, otherwise it will be set to major… |
Enumeration | .1.3.6.1.4.1.164.3.1.4.1.1.1.6 |
||||||||||||||||||||||||||
|
prtSMaskedAlrStat
Indicates the alarm state in the port(ch) agent level,
including Masked alarms. This attribute will be set to: critical(7) - when there is at least one active (state ON) critical alarm, otherwise i… |
Enumeration | .1.3.6.1.4.1.164.3.1.4.1.1.1.7 |
||||||||||||||||||||||||||
|
prtSClearAlrCmd
Setting this attribute to on(3) enforces a clear operation
of the alarm status events in the given port. The clear operation will not be applied for masked/inverted alarms. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.4.1.1.1.8 |
||||||||||||||||||||||||||
|
prtSTestMask
This is a mask which indicates which tests from the
'prtSTstCmd' list are allowed for the requested port. If a specific test is allowed, its respective bit will be SET in the mask : TEST … |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.4.1.1.1.9 |
||||||||||||||||||||||||||
|
prtSTstCmd
Setting this attribute to any of the above values will
initiate a test on the specific port if the operation is legal. If the operation is not legal, the mux will ignore the operation. testPerTS(31) - when this test… |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.4.1.1.1.10 |
||||||||||||||||||||||||||
|
prtSTstDuration
This attribute indicates the maximum duration of executing
a test on the specific port. This entry applies to all the test operations. The resolution will be a minute, and the maximum duration is limited to 30 minutes. … |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.4.1.1.1.11 |
||||||||||||||||||||||||||
|
prtSBertClrCmd
Setting this attribute initiates bert count clear operation.
It is valid only when bert test is active on the specific port. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.4.1.1.1.12 |
||||||||||||||||||||||||||
|
prtSBertTstRslt
This attribute indicates the number of Bit Error Rate
indicated during the BERT operation. It is valid only when bert test is active on the specific port. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.4.1.1.1.13 |
||||||||||||||||||||||||||
|
prtSInterfaceType
This attribute indicates a unique HW interface type of the
selected port. |
OctetString Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.4.1.1.1.14 |
||||||||||||||||||||||||||
|
prtSParamStatus
This object indicates Status of parameters specific to the
selected port. - For a port that has no special status or is supported by prtSExHsfStatTable - 1 Octet: 00hex - For VC-6, VC-6A, VC-6AG, VC-6A/… |
OctetString Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.4.1.1.1.15 |
||||||||||||||||||||||||||
|
prtSTestMaskXp
This is an Expanded test mask of the prtSTestMask object.
The prtSTestMask object reached its maximum, being an Integer with 32 bits. This object indicates which tests from the 'prtSTstCmdXP' list are allowed for the … |
OctetStringr/w Constraints: range: 0-899 |
.1.3.6.1.4.1.164.3.1.4.1.1.1.16 |
||||||||||||||||||||||||||
|
prtSRdnStatus
Redundancy Status of this port.
noRdn - this port is not part of a Redundancy pair/group. offline - this port is offline from Redundancy point of view. online - this port is online from Redundancy point of view. |
Enumeration | .1.3.6.1.4.1.164.3.1.4.1.1.1.17 |
prtSAlrTable
table.1.3.6.1.4.1.164.3.1.4.1.2
·
1 row entry
·
11 columns
The list of port agent alarms.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtSAlrIdx
A unique number to identify an entry in the alarm status table.
Users should use the get next function to read this table because the indexes are not consecutive |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.4.1.2.1.1 |
||||||||||||||||||||||||||
|
prtSAlrSltIdx
This attribute indicates a unique identifier of the slot
where the card is inserted. In the ?004 Unit the entries PsB(2),ClB(4),io6(10)..io12(16) are not valid. For the Vmux2100 Main Board clA (3) is used. |
Enumeration | .1.3.6.1.4.1.164.3.1.4.1.2.1.2 |
||||||||||||||||||||||||||
|
prtSAlrPrtIdx
This attribute indicates a unique identifier of the port
the alarm applies to. All the values are valid. No alarms exist for a port which does not exist. Valid valuesfor MP-2100/2200: exPrt1 (1) .. exPrt16 (16) , … |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.4.1.2.1.3 |
||||||||||||||||||||||||||
|
prtSAlrCodeDescription
This attribute is a full text description of the alarm.
The alarm description includes the following information: alarm code, alarm text, alarm severity, Masked or Inverted flag and counter. |
OctetString Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.4.1.2.1.4 |
||||||||||||||||||||||||||
|
prtSAlrCode
A code identifying the alarm of an entry in the alarm status
table at port level. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.4.1.2.1.5 |
||||||||||||||||||||||||||
|
prtSAlrSeverity
The severity of the alarm.
|
Enumeration Constraints: range: 1-991 |
.1.3.6.1.4.1.164.3.1.4.1.2.1.6 |
||||||||||||||||||||||||||
|
prtSAlrState
State of the alarm.
|
Enumeration | .1.3.6.1.4.1.164.3.1.4.1.2.1.7 |
||||||||||||||||||||||||||
|
prtSAlrCounter
A counter - how many times the alarm occured since last
clear operation. ON and OFF Alarm will be counted separately. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.4.1.2.1.8 |
||||||||||||||||||||||||||
|
prtSAlrMask
Alarm mask : on/off.
|
Enumeration | .1.3.6.1.4.1.164.3.1.4.1.2.1.9 |
||||||||||||||||||||||||||
|
prtSAlrInvert
Alarm invert : on/off.
|
Enumeration | .1.3.6.1.4.1.164.3.1.4.1.2.1.10 |
||||||||||||||||||||||||||
|
prtSAlrCardType
This attribute indicates the type of card installed
in the specific slot position. The enumeration is according to mdlSInstCardType. |
Enumeration | .1.3.6.1.4.1.164.3.1.4.1.2.1.11 |
prtFrStatisTable
table.1.3.6.1.4.1.164.3.1.4.1.3.1.1
·
1 row entry
·
24 columns
This table is applicable only for an active port running an FR protocol .
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtFrStatisSltIdx
This attribute indicates a unique slot position where
the module is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. For stand-alone units this index will be notApplicable (255). |
Enumeration | .1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.1 |
||||||||||||||||||||||||||||
|
prtFrStatisPrtIdx
This attribute indicates a unique port number.
|
Enumeration | .1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.2 |
||||||||||||||||||||||||||||
|
prtFrStatisInvIdx
The Interval of 15 min. for which the following statistics
counters are applicable. |
Enumeration | .1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.3 |
||||||||||||||||||||||||||||
|
prtFrTimeElapsed
The number of seconds that have elapsed since the
beginning of the current error-measurement interval. This object is applicable mainly for the current interval. For other interval: - if data is available: value will b… |
Integer32 | .1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.4 |
||||||||||||||||||||||||||||
|
prtFrRxTotalFrames
The total number of frames received by this port during the
selected interval. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.5 |
||||||||||||||||||||||||||||
|
prtFrTxTotalFrames
The total number of frames sent by this port during the
selected interval. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.6 |
||||||||||||||||||||||||||||
|
prtFrRxTotalBytes
The total number of bytes received by this port during the
selected interval. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.7 |
||||||||||||||||||||||||||||
|
prtFrTxTotalBytes
The total number of bytes sent by this port during the
selected interval. |
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.8 |
||||||||||||||||||||||||||||
|
prtFrRxMngFrames
The management number of frames received by this port
during the selected interval. |
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.9 |
||||||||||||||||||||||||||||
|
prtFrTxMngFrames
The management number of frames sent by this port during the
selected interval. |
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.10 |
||||||||||||||||||||||||||||
|
prtFrRxDeFrames
The number of De frames received by this port during the
selected interval. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.11 |
||||||||||||||||||||||||||||
|
prtFrTxDeFrames
The number of De frames sent by this port during the
selected interval. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.12 |
||||||||||||||||||||||||||||
|
prtFrRxDcrdCongDeFr
The number of De frames discarded due to congestion,
received by this port during the selected interval. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.13 |
||||||||||||||||||||||||||||
|
prtFrTxDcrdCongDeFr
The number of De frames discarded due to congestion,
sent by this port during the selected interval. |
SNMPv2-SMICounter32 Constraints: range: 1-255Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.14 |
||||||||||||||||||||||||||||
|
prtFrRxDcrdCongAllFr
All the frames discarded due to congestion,
received by this port during the selected interval. |
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.15 |
||||||||||||||||||||||||||||
|
prtFrTxDcrdCongAllFr
All the frames discarded due to congestion,
sent by this port during the selected interval. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.16 |
||||||||||||||||||||||||||||
|
prtFrRxFecn
Number of frames received by this port during the
selected interval, indicating forward congestion. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.17 |
||||||||||||||||||||||||||||
|
prtFrTxFecn
Number of frames sent by this port during the
selected interval, indicating forward congestion. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.18 |
||||||||||||||||||||||||||||
|
prtFrRxBecn
Number of frames received by this port during the
selected interval, indicating backward congestion. |
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.19 |
||||||||||||||||||||||||||||
|
prtFrTxBecn
Number of frames sent by this port during the
selected interval, indicating backward congestion. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.20 |
||||||||||||||||||||||||||||
|
prtFrRxBeViol
Number of data frames received by this port during the
selected interval, exceeding the Burst Excess value. |
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.21 |
||||||||||||||||||||||||||||
|
prtFrTxBeViol
Number of data frames sent by this port during the
selected interval, exceeding the Burst Excess value. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.22 |
||||||||||||||||||||||||||||
|
prtFrRxBcViol
Number of data frames received by this port during the
selected interval, exceeding the Burst Committed value. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.23 |
||||||||||||||||||||||||||||
|
prtFrTxBcViol
Number of data frames sent by this port during the
selected interval, exceeding the Burst Committed value. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.24 |
prtCrStatisTable
table.1.3.6.1.4.1.164.3.1.4.1.3.2.1
·
1 row entry
·
8 columns
This table is applicable only for an active port running a CR protocol .
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
prtCrStatisSltIdx
This attribute indicates a unique slot position where
the module is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. For stand-alone units this index will be notApplicable (255). |
Enumeration | .1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.1 |
||||||
|
prtCrStatisPrtIdx
This attribute indicates a unique port number.
|
Enumeration Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.2 |
||||||
|
prtCrStatisInvIdx
The Interval of 15 min. for which the following statistics
counters are applicable. |
Enumeration | .1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.3 |
||||||
|
prtCrTimeElapsed
The number of seconds that have elapsed since the
beginning of the current error-measurement interval. This object is applicable mainly for the current interval. For other interval: - if data is available: value will b… |
Integer32 | .1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.4 |
||||||
|
prtCrRxTotalCells
The total number of cells received by this port during the
selected interval. |
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.5 |
||||||
|
prtCrTxTotalCells
The total number of cells sent by this port during the
selected interval. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.6 |
||||||
|
prtCrRxDataCells
The number of Data Cells received by this port during the
selected interval. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.7 |
||||||
|
prtCrTxDataCells
The number of Data Cells sent by this port during the
selected interval. |
SNMPv2-SMICounter32 Constraints: range: 1-255Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.8 |
prtDlciStatisTable
table.1.3.6.1.4.1.164.3.1.4.1.3.3.1
·
1 row entry
·
15 columns
This table is applicable only for an active port running an FR, FR+ or CR protocol, with valid DLCIs .
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtDlciSltIdx
This attribute indicates a unique slot position where
the module is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. For stand-alone units this index will be notApplicable (255). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.1 |
||||||||||||||||||||||||||||||
|
prtDlciPrtIdx
This attribute indicates a unique port number.
|
Enumeration Constraints: range: 1-4 |
.1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.2 |
||||||||||||||||||||||||||||||
|
prtDlciIdx
This attribute indicates a unique DLCI index for each valid
DLCI (16..991). |
Integer32 Constraints: range: 0-86400 |
.1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.3 |
||||||||||||||||||||||||||||||
|
prtDlciRxDeFrames
The number of De frames received by this DLCI.
|
SNMPv2-SMICounter32 Constraints: range: 0-86400Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.4 |
||||||||||||||||||||||||||||||
|
prtDlciTxDeFrames
The number of De frames sent by this DLCI.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.5 |
||||||||||||||||||||||||||||||
|
prtDlciRxDcrdCongDeFr
The number of De frames discarded due to congestion,
received by this DLCI. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.6 |
||||||||||||||||||||||||||||||
|
prtDlciTxDcrdCongDeFr
The number of De frames discarded due to congestion,
sent by this DLCI. |
SNMPv2-SMICounter32 Constraints: range: 1-255Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.7 |
||||||||||||||||||||||||||||||
|
prtDlciRxDcrdCongAllFr
All the frames discarded due to congestion,
received by this DLCI. |
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.8 |
||||||||||||||||||||||||||||||
|
prtDlciTxDcrdCongAllFr
All the frames discarded due to congestion,
sent by this DLCI. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.9 |
||||||||||||||||||||||||||||||
|
prtDlciTxFecn
Number of frames sent by this DLCI, indicating forward
congestion. |
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.10 |
||||||||||||||||||||||||||||||
|
prtDlciTxBecn
Number of frames sent by this DLCI, indicating backward
congestion. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.11 |
||||||||||||||||||||||||||||||
|
prtDlciRxBeViol
Number of data frames received by this DLCI, exceeding the
Burst Excess value. |
SNMPv2-SMICounter32 Constraints: range: 0-16777215Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.12 |
||||||||||||||||||||||||||||||
|
prtDlciTxBeViol
Number of data frames sent by this DLCI, exceeding the Burst
Excess value. |
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.13 |
||||||||||||||||||||||||||||||
|
prtDlciRxBcViol
Number of data frames received by this DLCI, exceeding the
Burst Committed value. |
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.14 |
||||||||||||||||||||||||||||||
|
prtDlciTxBcViol
Number of data frames sent by this DLCI, exceeding the Burst
Committed value. |
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.15 |
prtT1FdlMsgTable
table.1.3.6.1.4.1.164.3.1.4.1.3.4.1
·
1 row entry
·
4 columns
This table is applicable for a T1 interface with 'esf' LineType .
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
prtT1FdlMsgSltIdx
This attribute indicates a unique slot position where
the module is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.4.1.3.4.1.1.1 |
||||||
|
prtT1FdlMsgPrtIdx
This attribute indicates a unique port number.
MTML-1/T1 modules have just one external interface. |
Enumeration | .1.3.6.1.4.1.164.3.1.4.1.3.4.1.1.2 |
||||||
|
prtT1FdlMsgFdlTxRx
The Fdl tx/rx reference of the Fdl message.
|
Enumeration | .1.3.6.1.4.1.164.3.1.4.1.3.4.1.1.3 |
||||||
|
prtT1FdlMsg
FDL message.
|
OctetString | .1.3.6.1.4.1.164.3.1.4.1.3.4.1.1.4 |
prtExTsSplitTable
table.1.3.6.1.4.1.164.3.1.4.2.1
·
1 row entry
·
12 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry, except prtExTsBitTest that will be written directly to the Active Configuration.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtExTsCnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.4.2.1.1.1 |
||||||||||||||||||||||||||||||||||||||||||||
|
prtExTsSltIdx
This attribute indicates a unique slot position where
the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. notApplicable - for stand-alone units. |
Enumeration | .1.3.6.1.4.1.164.3.1.4.2.1.1.2 |
||||||||||||||||||||||||||||||||||||||||||||
|
prtExTsPrtIdx
This attribute indicates a unique port number.
Most ML cards have only one external interface. inPrt1 - for MTML-H/E1 cards. For other products' index see their specification. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.4.2.1.1.3 |
||||||||||||||||||||||||||||||||||||||||||||
|
prtExTsIdx
This attribute indicates a unique time slot position.
The valid time slots are: 1..24 for T1 Card and 1..31 for E1 interface. In G732S-E1 lines, time slot 16 is not valid for data, it is dedicated to multiframe synchro… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.4.2.1.1.4 |
||||||||||||||||||||||||||||||||||||||||||||
|
prtExTsBit
This attribute indicates a unique Bit within the time slot.
The valid Bits are: 1..8. 255=NA. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.4.2.1.1.5 |
||||||||||||||||||||||||||||||||||||||||||||
|
prtExTsIConSlot
This attribute indicates whether the specified time slot is
connected/routed internally in the Agent and to which card it is connected. In the ?004 Unit the entries io6(10)..io12(16) are not valid. notApplicable - for s… |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.4.2.1.1.6 |
||||||||||||||||||||||||||||||||||||||||||||
|
prtExTsIConPrt
This attribute indicates the internally (In Mux)
connected/routed port. For other products' index see their specification. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.4.2.1.1.7 |
||||||||||||||||||||||||||||||||||||||||||||
|
prtExTsBitTest
This attribute indicates a test to be activated on the selected Bit.
It is applicable only when prtExPh1MlTsTest=split(254). none - no test is applied for the selected Bit. notApplicable - when prtExPh1MlTsTest is NOT s… |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.4.2.1.1.8 |
||||||||||||||||||||||||||||||||||||||||||||
|
prtExTsTxSignaling
Link - Tx Signaling per TS, for TSs having TS Type=Voice
(agnTsType=voice(2)). It monitors what is sent to Link for the selected TS, for A,B,C,D Signaling Bits. Bit 1= LSB Bit 8= MSB Bit 1-2 = A Signaling Bit: 00='… |
OctetString Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.4.2.1.1.9 |
||||||||||||||||||||||||||||||||||||||||||||
|
prtExTsRxSignaling
Link - Rx Signaling per TS, for TSs having TS Type=Voice
(agnTsType=voice(2)). It monitors what is received from Link for the selected TS, for A,B,C,D Signaling Bits. Bit 1= LSB Bit 8= MSB Bit 1-2 = A Signaling Bit:… |
OctetString Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.4.2.1.1.10 |
||||||||||||||||||||||||||||||||||||||||||||
|
prtExTsTxIoSignaling
IO - Tx Signaling per TS, for TSs having TS Type=Voice
(agnTsType=voice(2)). It monitors what is sent to IO port for the selected TS, for A,B,C,D Signaling Bits. Bit 1= LSB Bit 8= MSB Bit 1-2 = A Signaling Bit: 00=… |
OctetString | .1.3.6.1.4.1.164.3.1.4.2.1.1.11 |
||||||||||||||||||||||||||||||||||||||||||||
|
prtExTsRxIoSignaling
IO - Rx Signaling per TS, for TSs having TS Type=Voice
(agnTsType=voice(2)). It monitors what is received from IO port for the selected TS, for A,B,C,D Signaling Bits. Bit 1= LSB Bit 8= MSB Bit 1-2 = A Signaling Bit… |
OctetString | .1.3.6.1.4.1.164.3.1.4.2.1.1.12 |
prtAgendaBehaviourTable
table.1.3.6.1.4.1.164.3.1.4.2.2.1
·
1 row entry
·
4 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry.
An entry in table.
Indexes
prtAlarmsCmprVersion prtAlarmsCmprAlarmSlot prtAlarmsCmprAlarmPort prtAlarmsCmprAlarmIdx
| Column | Syntax | OID |
|---|---|---|
|
prtAgendaBehaviourCnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg. |
Integer32 | .1.3.6.1.4.1.164.3.1.4.2.2.1.1.1 |
|
prtAgendaBehaviourSltIdx
This parameter should be:
- slot number for MX3000 - 255 = N/A for MX300/30. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.4.2.2.1.1.2 |
|
prtAgendaBehaviourPrtIdx
This parameter should be:
- port number for MX300/30 - 100 = N/A for MX3000. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.4.2.2.1.1.3 |
|
prtAgendaBehaviourOnOff
Setting this command to on(3) enables the agenda function
at module (3000) or port (300/30) level. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.4.2.2.1.1.4 |
prtCnfgAgendaTable
table.1.3.6.1.4.1.164.3.1.4.2.2.2
·
1 row entry
·
7 columns
This table allows the user to schedule the time a session is active per week basis.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtCnfgAgendaCnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg. |
Integer32 | .1.3.6.1.4.1.164.3.1.4.2.2.2.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtCnfgAgendaSltIdx
This attribute is equal to:
-slot number for MX3000 -255 = N/A for MX300/30 |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.4.2.2.2.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtCnfgAgendaPrtIdx
This attribute is equal to:
- port number for MX300/30 - port number for MX3000. For example 1-4 in MHS-4 cards. - 100 = N/A for MX3000 when not used. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.4.2.2.2.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtCnfgAgendaDayIdx
This attribute for which day of the week this row applies.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.4.2.2.2.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtCnfgAgendaSesId
The user may define 4 different active intervals per day.
|
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.4.2.2.2.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtCnfgAgendaFrom
Start from time interval in seconds.
|
Integer32r/w | .1.3.6.1.4.1.164.3.1.4.2.2.2.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtCnfgAgendaTo
To time interval in seconds.
|
Integer32r/w | .1.3.6.1.4.1.164.3.1.4.2.2.2.1.7 |
prtGenCnfgTable
table.1.3.6.1.4.1.164.3.1.4.2.3
·
1 row entry
·
12 columns
This table allows the user to configure general port parameters.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
prtGenCnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg. The write operation is valid only to the TmpCnfg. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.4.2.3.1.1 |
||||||||
|
prtGenCnfgSltIdx
This attribute indicates a unique slot position where
the card is inserted. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.4.2.3.1.2 |
||||||||
|
prtGenCnfgPrtIdx
This attribute indicates a unique external or internal port number.
For MP: exPrt1 (1) .. exPrt16 (16) , notApplicable(100), inPrt1 (101) .. inPrt84 (184) |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.4.2.3.1.3 |
||||||||
|
prtGenCnfgLinkToSlot
This attribute indicates the slot of the ML card to which
the IO port is mapped. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.4.2.3.1.4 |
||||||||
|
prtGenCnfgLinkToPort
This attribute indicates the port in the prtGenCnfgLinkToSlot of
the ML card to which the IO port is mapped. For MP: exPrt1 (1) , exPrt2 (2) , exPrt3 (3) , exPrt4 (4) , exPrt5 (5) , exPrt6 (6) , exPrt7… |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.4.2.3.1.5 |
||||||||
|
prtGenCnfgPortId
IO Port Id for V5.1 use.
This object is applicable only for part of the PSTN and ISDN IO ports. Generally, 0 is a valid value. Nevertheless, for ports that do not support this object, the value will be: notApplic… |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.4.2.3.1.6 |
||||||||
|
prtGenCnfgBusConnection
This object indicates the support of the card regarding Bus Connection.
Same value for all ports of the card. partial = 2 Buses (AB) full = 4 Buses (ABCD) partial CD = 2 Buses CD Actually the support depends on the c… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.4.2.3.1.7 |
||||||||
|
prtGenCnfgInbandMng
This object indicates whether Inband Management is used over the
link. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.4.2.3.1.8 |
||||||||
|
prtGenCnfgInbandMngRoutProt
This object indicates the Inband Mng Routing Protocol of
the port. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.4.2.3.1.9 |
||||||||
|
prtGenCnfgProtectionMode
This object indicates the Protection Mode of the port.
notApplicable- when Bus Protection Point=No. For VC-4/Omni card this object is supported RO. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.4.2.3.1.10 |
||||||||
|
prtGenCnfgConnect
This object indicates whether the port should be considered in
any of the mux algorithms. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.4.2.3.1.11 |
||||||||
|
prtGenCnfgSignalingType
This object selects the Type of Signaling used by the port.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.4.2.3.1.12 |
prtCmprTable
table.1.3.6.1.4.1.164.3.1.4.3.1
·
1 row entry
·
7 columns
A table.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtCmprTypIdx
This attribute indicates the Type of the Compressed being
referred. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.4.3.1.1.1 |
||||||||||
|
prtCmprCnfgIdx
This attribute indicates the configuration to which the
Compressed information is related. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.4.3.1.1.2 |
||||||||||
|
prtCmprVersion
This attribute indicates the version of the internal format of
the Compressed data |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.4.3.1.1.3 |
||||||||||
|
prtCmprSltIdx
This attribute indicates a unique number of the slot position
where the card is inserted. In the ?004 Unit the entries psB(2),clB(4),io6(10)..io(16) are not valid. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.4.3.1.1.4 |
||||||||||
|
prtCmprPrtIdx
This attribute indicates a unique identifier of the port
the compressed information relates to. Valid values: exPrt1 (1) .. exPrt16 (16) , inPrt1 (101) .. inPrt48 (148). |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.4.3.1.1.5 |
||||||||||
|
prtCmprObj
This attribute is the compressed information itself.
|
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.4.3.1.1.6 |
||||||||||
|
prtCmprStatisticObj
This attribute is the compressed statistics information itself.
|
OctetString Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.4.3.1.1.7 |
prtDlciCmprTable
table.1.3.6.1.4.1.164.3.1.4.3.2
·
1 row entry
·
6 columns
A table.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
prtDlciCmprCnfgIdx
This attribute indicates the configuration to which the
Compressed information is related. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.4.3.2.1.1 |
|
prtDlciCmprVersion
This attribute indicates the version of the internal format of
the Compressed data |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.4.3.2.1.2 |
|
prtDlciCmprSltIdx
This attribute indicates a unique number of the slot position
where the module is inserted. In the ?004 Unit the entries psB(2),clB(4),io6(10)..io(16) are not valid. |
Enumeration | .1.3.6.1.4.1.164.3.1.4.3.2.1.3 |
|
prtDlciCmprPrtIdx
This attribute indicates a unique identifier of the port
the compressed information relates to. All the values are valid. |
Enumeration Constraints: range: 4-4 |
.1.3.6.1.4.1.164.3.1.4.3.2.1.4 |
|
prtDlciCmprDlciIdx
This attribute indicates a unique identifier of the Dlci
the compressed information relates to. The values are between 16 - 991. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.4.3.2.1.5 |
|
prtDlciCmprObj
This attribute is the compressed information itself.
|
OctetStringr/w | .1.3.6.1.4.1.164.3.1.4.3.2.1.6 |
prtAlarmsCmprTable
table.1.3.6.1.4.1.164.3.1.4.3.3
·
1 row entry
·
5 columns
A table.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
prtAlarmsCmprVersion
This attribute indicates the version of the internal format of
the Compressed data |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.4.3.3.1.1 |
|
prtAlarmsCmprAlarmSlot
This attribute indicates the desired slot position.
In the ?004 Unit the entries PsB(2),ClB(4),io6(10)..io(16) are not valid. For Stand-alone units, notApplicable(255) will appear. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.4.3.3.1.2 |
|
prtAlarmsCmprAlarmPort
This attribute indicates a unique identifier of the port
the alarm applies to. All the values are valid. No alarms exist for a non-existing port. IP Bundles are considered a port too, for this matter. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.4.3.3.1.3 |
|
prtAlarmsCmprAlarmIdx
A unique number to identify an entry in the alarm status table
of the agent. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.4.3.3.1.4 |
|
prtAlarmsCmprObj
This attribute is the compressed information itself.
|
OctetString | .1.3.6.1.4.1.164.3.1.4.3.3.1.5 |
agnLinkMapTable
table.1.3.6.1.4.1.164.3.1.5.1
·
1 row entry
·
4 columns
A table.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
mapLinkId
A unique identifier of the link
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.5.1.1.1 |
|
mapLinkSltIdx
This attribute indicates a unique slot position where
the card is inserted. In the ?004 Unit the entries clA(3), io6(10)..io12(16) are not valid. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.5.1.1.2 |
|
mapLinkPrtIdx
This attribute indicates a unique port number.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.5.1.1.3 |
|
mapLinkStatus
This attribute indicates the status of the link between the
two muxes |
Enumeration | .1.3.6.1.4.1.164.3.1.5.1.1.4 |
ethIfTable
table.1.3.6.1.4.1.164.3.1.6.1.1
·
1 row entry
·
25 columns
A table.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
ethIfIdx
A unique index of the ethernet interface/port.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.1.1.1.1 |
|
ethMode
This object indicates the Ethernet mode of operation.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.1.1.2 |
|
ethBridgingMode
This object indicates the bridging mode of the Ethernet
interface. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.1.1.3 |
|
ethEncapsulationCRCMode
This object define the encapsulation type requested for the
Ethernet interface. It indicates if we transfer the Ethernet frame to the other side with or without the CRC. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.1.1.4 |
|
ethBackPressure
This parameter defines whether to enable or disable Back pressure.
Back Pressure is a flow control parameter. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.1.1.5 |
|
ethLimit4
This parameter determine the Back off algorithm mode.
Every 4 following collisions the Framer will be thrown out (4 times more than usuall). |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.1.1.6 |
|
ethSkipInitReset
This parameter defines whether read status on reset.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.1.1.7 |
|
ethMulticastBlock
This parameter defines whether to send multicast message to WAN from LAN or not.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.1.1.8 |
|
ethBroadcastBlock
This parameter defines whether to send broadcast message to WAN from LAN or not.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.1.1.9 |
|
ethSpeed
This parameter defines the line speed.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.1.1.10 |
|
ethRip2
This parameter defines whether to send RIP II message
to WAN from LAN or not |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.1.1.11 |
|
ethPortPriority
This parameter defines if priority is to
be considered for this Port. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.1.1.12 |
|
ethPortMngEnable
This parameter defines whether management data can pass through this Port.
localOnly (4) - Only local device can be managed via this port. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.1.1.13 |
|
ethFlowCtrlMacAddress
In case of flow control - transmit frame with this specific MAC address
to inform the other end to stop sending frames. Default: 01.80.C2.00.00.01. |
MacAddressr/w Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.3.1.6.1.1.1.14 |
|
ethRateLimit
This parameter defines the Rate Limit of the line, in Mbps.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.1.1.1.15 |
|
ethJumboFrameEnable
This parameter defines whether to support Jumbo Frame or not.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.1.1.16 |
|
ethAutoMdiXEnable
This parameter defines whether to support
automatic change between MDI and MDI[X]. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.1.1.17 |
|
ethPortDataEnable
This parameter defines whether this port is enabled
for data (that is not management). no(2) - management can run on this port yes(3) - both management and payload data can run on this port. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.1.1.18 |
|
ethIfUse
This parameter defines the use of the port.
1=NET 2=USER . |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.1.1.1.19 |
|
ethLineOam
This parameter defines the working mode of 802.AH OAM mechanism.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.1.1.20 |
|
ethRoutingProtocol
This parameter defines the routing protocol
used above ETH port. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.1.1.21 |
|
ethMdiXManualSwitch
This parameter sets the port to be MDI-X (cross-over) or
MDI (straight-through). It is applicable only when ethAutoMdiXEnable = no, namely, only when the automatic MDI/MDIX crossover function is disabled. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.1.1.22 |
|
ethDot1xEnable
Determines if the Port-Based Network Access Protocol
(IEEE-802.1x) is enabled for the Ethernet Port. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.1.1.23 |
|
ethPartnerRateMode
For converters having couples of ports, where each couple contains
a port with an SFP connector and a port with a RJ connector, this parameter is relevant for the SFP port. It affects Rate configuration of its part… |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.1.1.24 |
|
ethDot1xPortRole
Determine the functionality of the port in
the Port-Based Network Access Protocol (IEEE-802.1x) - either Authenticator or Supplicant. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.1.1.25 |
ethIfCurrentTable
table.1.3.6.1.4.1.164.3.1.6.1.2.1
·
1 row entry
·
42 columns
The Ethernet Current table. When the index specifies the Ethernet interface (only), the counters are for an interval of 15 minutes.
An entry in the Ethernet Current table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
ethIfCurrentIndex
The index of the Ethernet interface.
It may be ifIndex. For some devices (e.g RICi-622GE), supporting several types of intervals, this index will be a concatenation of the port index and interval type. Interval ty… |
SNMPv2-SMIInteger32 Constraints: range: 4-4Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.1.2.1.1.1 |
|
ethIfCurrentStatus
The status of the current interval:
0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was partialy out. 4 - notValid - module is out. |
OctetString | .1.3.6.1.4.1.164.3.1.6.1.2.1.1.2 |
|
ethIfCurrentInFrames
The counter associated with the number of received frames,
encountered by the Ethernet interface in the current interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.1.1.3 |
|
ethIfCurrentInOctets
The counter associated with the number of received octets,
encountered by the Ethernet interface in the current interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.1.1.4 |
|
ethIfCurrentAlignmentErrors
The counter associated with the number of received frames,
which are not complete (The result of dividing the number of bits by 8 is not an Integer), encountered by the Ethernet interface in the current interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.1.1.5 |
|
ethIfCurrentFCSErrors
The counter associated with the number of received frames
that didn't pass the FCS test, encountered by the Ethernet interface in the current interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.1.1.6 |
|
ethIfCurrentLengthError
The counter associated with the number of received frames
with length error, encountered by the Ethernet interface in the current interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.1.1.7 |
|
ethIfCurrentOutFrames
The counter associated with the number of transmitted frames,
encountered by the Ethernet interface in the current interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.1.1.8 |
|
ethIfCurrentOutOctets
The counter associated with the number of transmitted octets,
encountered by the Ethernet interface in the current interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.1.1.9 |
|
ethIfCurrentSingleCollisionFrames
The counter associated with the number of successfully
transmitted frames for which transmission was inhibited by exactly one collision, encountered by the Ethernet interface in the current interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.1.1.10 |
|
ethIfCurrentMultipleCollisionFrames
The counter associated with the number of successfully
transmitted frames for which transmission was inhibited by more than one collision, encountered by the Ethernet interface in the current interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.1.1.11 |
|
ethIfCurrentDeferredTransmissions
The counter associated with the number of transmitted frames
for which the first transmission attempt was delayed due to a busy media, encountered by the Ethernet interface in the current interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.1.1.12 |
|
ethIfCurrentLateCollisions
The counter associated with the number of times that a
collision was detected later than the first 64 bytes of the frame, encountered by the Ethernet interface in the current interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.1.1.13 |
|
ethIfCurrentCarrierSenseErrors
The counter associated with the number of times that the
carrier sense condition was lost or never asserted when attempting to transmit a frame, encountered by the Ethernet interface in the current interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.1.1.14 |
|
ethIfCurrentInputCongestionDropped
The counter associated with the number of frames dropped
due to lack of buffers in ingress pool, encountered by the Ethernet interface in the current interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.1.1.15 |
|
ethIfCurrentOutputCongestionDropped
The counter associated with the number of dropped frames
due to a congestion, encountered by the Transmit direction to the Ethernet interface in the current interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.1.1.16 |
|
ethIfCurrentOverflowInFrames
The number of times the associated ethIfCurrentInFrames
counter has overflowed in the current interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.1.1.17 |
|
ethIfCurrentOverflowInOctets
The number of times the associated ethIfCurrentInOctets
counter has overflowed in the current interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.1.1.18 |
|
ethIfCurrentOverflowFCSErrors
The number of times the associated ethIfCurrentFCSErrors
counter has overflowed in the current interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.1.1.19 |
|
ethIfCurrentOverflowOutFrames
The number of times the associated ethIfCurrentOutFrames
counter has overflowed in the current interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.1.1.20 |
|
ethIfCurrentOverflowOutOctets
The number of times the associated ethIfCurrentOutOctets
counter has overflowed in the current interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.1.1.21 |
|
ethIfCurrentOverflowMultipleCollisionFrames
The number of times the associated ethIfCurrentMultipleCollisionFrames
counter has overflowed in the current interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.1.1.22 |
|
ethIfCurrentInUnicastFrames
The number of received Unicast frames, encountered by the
Ethernet interface in the current interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.1.1.23 |
|
ethIfCurrentOutUnicastFrames
The number of transmitted Unicast frames, encountered by the
Ethernet interface in the current interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.1.1.24 |
|
ethIfCurrentInMulticastFrames
The number of received Multicast frames, encountered by the
Ethernet interface in the current interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.1.1.25 |
|
ethIfCurrentOutMulticastFrames
The number of transmitted Multicast frames, encountered by the
Ethernet interface in the current interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.1.1.26 |
|
ethIfCurrentInBroadcastFrames
The number of received Broadcast frames, encountered by the
Ethernet interface in the current interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.1.1.27 |
|
ethIfCurrentOutBroadcastFrames
The number of transmitted Broadcast frames, encountered by the
Ethernet interface in the current interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.1.1.28 |
|
ethIfCurrentInDiscardFrames
The number of received Discarded frames, encountered by the
Ethernet interface in the current interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.1.1.29 |
|
ethIfCurrentOutDiscardFrames
The number of transmitted Discarded frames, encountered by the
Ethernet interface in the current interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.1.1.30 |
|
ethIfCurrentInPauseFrames
The number of received Pause frames, encountered by the
Ethernet interface in the current interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.1.1.31 |
|
ethIfCurrentOutPauseFrames
The number of transmitted Pause frames, encountered by the
Ethernet interface in the current interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.1.1.32 |
|
ethIfCurrentOverflowInUnicastFrames
The number of times the associated ethIfCurrentInUnicastFrames
counter has overflowed in the current interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.1.1.33 |
|
ethIfCurrentOverflowOutUnicastFrames
The number of times the associated ethIfCurrentOutUnicastFrames
counter has overflowed in the current interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.1.1.34 |
|
ethIfCurrentOverflowInMulticastFrames
The number of times the associated ethIfCurrentInMulticastFrames
counter has overflowed in the current interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.1.1.35 |
|
ethIfCurrentOverflowOutMulticastFrames
The number of times the associated ethIfCurrentOutMulticastFrames
counter has overflowed in the current interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.1.1.36 |
|
ethIfCurrentOverflowInBroadcastFrames
The number of times the associated ethIfCurrentInBroadcastFrames
counter has overflowed in the current interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.1.1.37 |
|
ethIfCurrentOverflowOutBroadcastFrames
The number of times the associated ethIfCurrentOutBroadcastFrames
counter has overflowed in the current interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.1.1.38 |
|
ethIfCurrentOverflowInDiscardFrames
The number of times the associated ethIfCurrentInDiscardFrames
counter has overflowed in the current interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.1.1.39 |
|
ethIfCurrentOverflowOutDiscardFrames
The number of times the associated ethIfCurrentOutDiscardFrames
counter has overflowed in the current interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.1.1.40 |
|
ethIfCurrentOverflowInPauseFrames
The number of times the associated ethIfCurrentInPauseFrames
counter has overflowed in the current interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.1.1.41 |
|
ethIfCurrentOverflowOutPauseFrames
The number of times the associated ethIfCurrentOutPauseFrames
counter has overflowed in the current interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.1.1.42 |
ethIfIntervalTable
table.1.3.6.1.4.1.164.3.1.6.1.2.2
·
1 row entry
·
43 columns
The Ethernet Interval table. When ethIfIntervalIndex specifies the Ethernet interface (only), the counters are for an interval of 15 minutes.
An entry in the Ethernet Interval table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ethIfIntervalIndex
The index of the Ethernet interface.
It may be ifIndex. For some devices (e.g RICi-622GE), supporting several types of intervals, this index will be a concatenation of the port index and interval type. Interval typ… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.1.2.2.1.1 |
||||||||||||||||
|
ethIfIntervalNumber
The Interval Number. This number is between 1 and x, where 1 is the
most recently completed interval and x is the least recently completed interval. For 15 minute intervals, usually x=96, but it can be different, depe… |
Integer32 | .1.3.6.1.4.1.164.3.1.6.1.2.2.1.2 |
||||||||||||||||
|
ethIfIntervalStatus
The status of the interval:
0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was partialy out. 4 - notValid - module is out. |
OctetString | .1.3.6.1.4.1.164.3.1.6.1.2.2.1.3 |
||||||||||||||||
|
ethIfIntervalInFrames
The counter associated with the number of received frames,
encountered by the Ethernet interface in the interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.2.1.4 |
||||||||||||||||
|
ethIfIntervalInOctets
The counter associated with the number of received octets,
encountered by the Ethernet interface in the interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.2.1.5 |
||||||||||||||||
|
ethIfIntervalAlignmentErrors
The counter associated with the number of received frames,
which are not complete (The result of dividing the number of bits by 8 is not an Integer), encountered by the Ethernet interface in the interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.2.1.6 |
||||||||||||||||
|
ethIfIntervalFCSErrors
The counter associated with the number of received frames
that didn't pass the FCS test, encountered by the Ethernet interface in the interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.2.1.7 |
||||||||||||||||
|
ethIfIntervalLengthError
The counter associated with the number of received frames
with length error, encountered by the Ethernet interface in the interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.2.1.8 |
||||||||||||||||
|
ethIfIntervalOutFrames
The counter associated with the number of transmitted frames,
encountered by the Ethernet interface in the interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.2.1.9 |
||||||||||||||||
|
ethIfIntervalOutOctets
The counter associated with the number of transmitted octets,
encountered by the Ethernet interface in the interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.2.1.10 |
||||||||||||||||
|
ethIfIntervalSingleCollisionFrames
The counter associated with the number of successfully
transmitted frames for which transmission was inhibited by exactly one collision, encountered by the Ethernet interface in the interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.2.1.11 |
||||||||||||||||
|
ethIfIntervalMultipleCollisionFrames
The counter associated with the number of successfully
transmitted frames for which transmission was inhibited by more than one collision, encountered by the Ethernet interface in the interval. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.2.1.12 |
||||||||||||||||
|
ethIfIntervalDeferredTransmissions
The counter associated with the number of transmitted frames
for which the first transmission attempt was delayed due to a busy media, encountered by the Ethernet interface in the interval. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.2.1.13 |
||||||||||||||||
|
ethIfIntervalLateCollisions
The counter associated with the number of times that a
collision was detected later than the first 64 bytes of the frame, encountered by the Ethernet interface in the interval. |
SNMPv2-SMIGauge32 Constraints: range: 0-7Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.2.1.14 |
||||||||||||||||
|
ethIfIntervalCarrierSenseErrors
The counter associated with the number of times that the
carrier sense condition was lost or never asserted when attempting to transmit a frame, encountered by the Ethernet interface in the interval. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.2.1.15 |
||||||||||||||||
|
ethIfIntervalInputCongestionDropped
The counter associated with the number of dropped frames
due to a congestion, encountered by the Receive direction to the Ethernet interface in the interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.2.1.16 |
||||||||||||||||
|
ethIfIntervalOutputCongestionDropped
The counter associated with the number of dropped frames
due to a congestion, encountered by the Transmit direction to the Ethernet interface in the interval. |
SNMPv2-SMIGauge32 Constraints: range: 0-7Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.2.1.17 |
||||||||||||||||
|
ethIfIntervalOverflowInFrames
The number of times the associated ethIfIntervalInFrames
counter has overflowed in the interval. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.2.1.18 |
||||||||||||||||
|
ethIfIntervalOverflowInOctets
The number of times the associated ethIfIntervalInOctets
counter has overflowed in the interval. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.2.1.19 |
||||||||||||||||
|
ethIfIntervalOverflowFCSErrors
The number of times the associated ethIfIntervalFCSErrors
counter has overflowed in the interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.2.1.20 |
||||||||||||||||
|
ethIfIntervalOverflowOutFrames
The number of times the associated ethIfIntervalOutFrames
counter has overflowed in the interval. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.2.1.21 |
||||||||||||||||
|
ethIfIntervalOverflowOutOctets
The number of times the associated ethIfIntervalOutOctets
counter has overflowed in the interval. |
SNMPv2-SMIGauge32 Constraints: range: 1-45Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.2.1.22 |
||||||||||||||||
|
ethIfIntervalOverflowMultipleCollisionFrames
The number of times the associated ethIfIntervalMultipleCollisionFrames
counter has overflowed in the interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.2.1.23 |
||||||||||||||||
|
ethIfIntervalInUnicastFrames
The number of received Unicast frames, encountered by the
Ethernet interface in the interval. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.2.1.24 |
||||||||||||||||
|
ethIfIntervalOutUnicastFrames
The number of transmitted Unicast frames, encountered by the
Ethernet interface in the interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.2.1.25 |
||||||||||||||||
|
ethIfIntervalInMulticastFrames
The number of received Multicast frames, encountered by the
Ethernet interface in the interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.2.1.26 |
||||||||||||||||
|
ethIfIntervalOutMulticastFrames
The number of transmitted Multicast frames, encountered by the
Ethernet interface in the interval. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.2.1.27 |
||||||||||||||||
|
ethIfIntervalInBroadcastFrames
The number of received Broadcast frames, encountered by the
Ethernet interface in the interval. |
SNMPv2-SMIGauge32 Constraints: range: 1-1024Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.2.1.28 |
||||||||||||||||
|
ethIfIntervalOutBroadcastFrames
The number of transmitted Broadcast frames, encountered by the
Ethernet interface in the interval. |
SNMPv2-SMIGauge32 Constraints: range: 0-7Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.2.1.29 |
||||||||||||||||
|
ethIfIntervalInDiscardFrames
The number of received Discarded frames, encountered by the
Ethernet interface in the interval. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.2.1.30 |
||||||||||||||||
|
ethIfIntervalOutDiscardFrames
The number of transmitted Discarded frames, encountered by the
Ethernet interface in the interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.2.1.31 |
||||||||||||||||
|
ethIfIntervalInPauseFrames
The number of received Pause frames, encountered by the
Ethernet interface in the interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.2.1.32 |
||||||||||||||||
|
ethIfIntervalOutPauseFrames
The number of transmitted Pause frames, encountered by the
Ethernet interface in the interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.2.1.33 |
||||||||||||||||
|
ethIfIntervalOverflowInUnicastFrames
The number of times the associated ethIfIntervalInUnicastFrames
counter has overflowed in the interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.2.1.34 |
||||||||||||||||
|
ethIfIntervalOverflowOutUnicastFrames
The number of times the associated ethIfIntervalOutUnicastFrames
counter has overflowed in the interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.2.1.35 |
||||||||||||||||
|
ethIfIntervalOverflowInMulticastFrames
The number of times the associated ethIfIntervalInMulticastFrames
counter has overflowed in the interval. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.2.1.36 |
||||||||||||||||
|
ethIfIntervalOverflowOutMulticastFrames
The number of times the associated ethIfIntervalOutMulticastFrames
counter has overflowed in the interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.2.1.37 |
||||||||||||||||
|
ethIfIntervalOverflowInBroadcastFrames
The number of times the associated ethIfIntervalInBroadcastFrames
counter has overflowed in the interval. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.2.1.38 |
||||||||||||||||
|
ethIfIntervalOverflowOutBroadcastFrames
The number of times the associated ethIfIntervalOutBroadcastFrames
counter has overflowed in the interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.2.1.39 |
||||||||||||||||
|
ethIfIntervalOverflowInDiscardFrames
The number of times the associated ethIfIntervalInDiscardFrames
counter has overflowed in the interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.2.1.40 |
||||||||||||||||
|
ethIfIntervalOverflowOutDiscardFrames
The number of times the associated ethIfIntervalOutDiscardFrames
counter has overflowed in the interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.2.1.41 |
||||||||||||||||
|
ethIfIntervalOverflowInPauseFrames
The number of times the associated ethIfIntervalInPauseFrames
counter has overflowed in the interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.2.1.42 |
||||||||||||||||
|
ethIfIntervalOverflowOutPauseFrames
The number of times the associated ethIfIntervalOutPauseFrames
counter has overflowed in the interval. |
SNMPv2-SMIGauge32 Constraints: range: 0-7Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.2.1.43 |
ethIfPerfTable
table.1.3.6.1.4.1.164.3.1.6.1.2.4
·
1 row entry
·
4 columns
The Ethernet Performance table.
An entry in the Ethernet Performance table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
ethIfPerfInOkFrames
The counter associated with the number of received OK frames,
encountered by the Ethernet interface since ethPerformanceMode Set to countOK (2) or Reset Statistics was done. |
SNMPv2-SMIGauge32 Constraints: range: 0-50000Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.4.1.1 |
|
ethIfPerfOutOkFrames
The counter associated with the number of transmitted OK frames,
encountered by the Ethernet interface since ethPerformanceMode Set to countOK (2) or Reset Statistics was done. |
SNMPv2-SMIGauge32 Constraints: range: 0-50000Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.4.1.2 |
|
ethIfPerfTotalCollisions
The counter associated with the total number of collisions
of any type encountered by the Ethernet interface since ethPerformanceMode Set to countOK (2) or Reset Statistics was done |
SNMPv2-SMIGauge32 Constraints: range: 3-10Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.4.1.3 |
|
ethIfPerfInOkOctets
The counter associated with the number of received OK Octets,
encountered by the Ethernet interface since ethPerformanceMode Set to countOK (2) or Reset Statistics was done. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.2.4.1.4 |
radMepTable
table.1.3.6.1.4.1.164.3.1.6.1.3.1
·
1 row entry
·
33 columns
MEG End Point (MEP) configuration table associated with Maitenance Entity Group (MEG) End Point. MEP is a short name for an expanded ETH flow point that includes a compound ETH Segment flow termination function, which marks the end point of an ETH ME, and a compound ETH Diagnostic flow function.
An entry in the table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
radOamIdx1
This object may indicate the Bridge Index or Configuration index.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.1.1.1 |
||||||||||||
|
radOamEvcIdx
This object indicates the Index of the EVC (Ethernet Virtual Circuit)
that the MEP is associated to. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.1.1.2 |
||||||||||||
|
radMepIdx
This object indicates the ID of the MEP being accessed.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.1.1.3 |
||||||||||||
|
radMepRowStatus
This attribute allows to create/delete a row in this table.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.3.1.6.1.3.1.1.4 |
||||||||||||
|
radMepLocalMepId
This object indicates the local MEP ID.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.1.1.5 |
||||||||||||
|
radMepRemoteMepId
This atribute is currently implemneted at radMepCcTable, that
supports multicast. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.1.1.6 |
||||||||||||
|
radMepOamMode
This object determines the OAM mode of the MEP:
disabled - no CC is initiated nor responded initiate - the device initiates and responds to CC react - the device does not initiate a CC, but responds to CC. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.7 |
||||||||||||
|
radMepContinuityVerMode
This object determines the OAM behavior of the MEP:
disabled - no CC is done cc_based - CC is done based on incoming messages lb_based - CC is done based on loopback messages. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.8 |
||||||||||||
|
radMepMeLevel
At any point in a network, ME Level is used to distinguish between OAM
signals belonging to different nested MEs. Maintenance Entity Levels are defined as follows: 0,1,2 are assigned to customers 3,4 are assigned to … |
Unsigned32r/w | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.9 |
||||||||||||
|
radMepOamDestAddrType
This object determines if the OAM messages are sent to user defined
unicast address, or to RAD proprietary multicast address. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.10 |
||||||||||||
|
radMepOamDestMacAddr
This object determines the MAC address that OAM packets are sent to.
|
MacAddressr/w Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.3.1.6.1.3.1.1.11 |
||||||||||||
|
radMepDefaultPriority
This object defines the priority of the OAM messages sent when no
service is defined on EVC. If a service is defined, the OAM messages will get the highest service priority existing on the EVC. |
Unsigned32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.1.3.1.1.12 |
||||||||||||
|
radMepCcStatus
This object indicates the Continuity Check (CC)
status. |
Enumeration | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.13 |
||||||||||||
|
radMepOamProtocol
Determines whether to use proprietary OAM mechanism,
or to use the standard (IEEE 802.1ag, ITU-T Y.1731). |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.14 |
||||||||||||
|
radMepMdId
The index of the Maintenance Domain in the radMdTable (radMdIndex).
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.1.1.15 |
||||||||||||
|
radMepMaFormat
The type (and thereby format) of the Maintenance Association
Name. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.16 |
||||||||||||
|
radMepMaName
The Short Maintenance Association name.
|
OctetStringr/w | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.17 |
||||||||||||
|
radMepSpVlanId
The SP (Service Provider) VLAN used when sending an OAM message.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.1.1.18 |
||||||||||||
|
radMepCcInterval
Indicates the interval at which CCMs are sent by a MEP
Valid only if radMepOamMode = initiate(4). |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.19 |
||||||||||||
|
radMepTransmitLbmDestMacAddress
The Target MAC Address Field to be transmitted in the Loopback Message:
For unicast MAC Address this is the unicast destination MAC address. For multicast MAC Address, this variable is read-only. This address will be u… |
MacAddressr/w Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.3.1.6.1.3.1.1.20 |
||||||||||||
|
radMepTransmitLbmDestMepId
The MEPID of another MEP in the same MA to which the
LBM is to be sent. This address will be used if the value of radMepTransmitLbmDestIsMepId is yes (3). 802.1ag clause 12.14.7.3.2:b. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.1.1.21 |
||||||||||||
|
radMepTransmitLbmDestIsMepId
yes (3) indicates that MEPID of the target MEP is used for loopback transmission.
no (2) indicates that unicast destination MAC address of the target MEP is used. 802.1ag clause 12.14.7.3.2:b. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.22 |
||||||||||||
|
radMepTransmitLbmMassages
The number of Loopback messages to be transmitted.
|
Integer32r/w | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.23 |
||||||||||||
|
radMepTransmitLbmVlanPriority
The priority to be used in the VLAN tag, if present,
in the transmitted frame. The default value is CCM priority. 802.1ag clause 12.14.7.3.2:e |
Unsigned32r/w | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.24 |
||||||||||||
|
radMepTransmitLbmVlanDropEnable
Drop Enable bit to be used in the VLAN tag, if present,
in the transmitted frame. 802.1ag clause 12.14.7.3.2:e |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.25 |
||||||||||||
|
radMepLbrIn
Total number of valid, in-order Loopback Replies received.
|
SNMPv2-SMICounter32 Constraints: range: 0-899Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.1.1.26 |
||||||||||||
|
radMepLbrInOutOfOrder
The total number of valid, out-of-order Loopback Replies
received. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.1.1.27 |
||||||||||||
|
radMepLbmOut
Total number of Loopback Messages transmitted.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.1.1.28 |
||||||||||||
|
radMepTransmitLtmTargetMacAddress
The Target MAC Address Field to be transmitted in the Link Trace Message:
A unicast destination MAC address. This address will be used if the value of radMepTransmitLtmTargetIsMepId is no (2). 802.1ag clause 12.14.… |
MacAddressr/w Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.3.1.6.1.3.1.1.29 |
||||||||||||
|
radMepTransmitLtmTargetMepId
The MEPID of another MEP in the same MA to which
LTM is to be transmitted. This address will be used if the value of radMepTransmitLtmTargetIsMepId is yes (3). 802.1ag clause 12.14.7.4.2:c. |
SNMPv2-SMIUnsigned32r/w Constraints: range: 1-96Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.1.1.30 |
||||||||||||
|
radMepTransmitLtmTargetIsMepId
yes (3) indicates that MEPID of the target MEP is used for Linktrace transmission.
no (2) indicates that unicast destination MAC address of the target MEP is used. 802.1ag clause 12.14.7.4.2:c. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.31 |
||||||||||||
|
radMepTransmitLtmTtl
The LTM TTL field. Default value, if not specified, is 64.
The TTL field indicates the number of hops remaining to the LTM. Decremented by 1 each Linktrace Responder that handles the LTM. The value received in the LTM i… |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.1.1.32 |
||||||||||||
|
radMepTransmitLtmActivationCmd
Activation command for starting Loop Trace. Set will be always
to 'on' value. After operation was finished, Agent will turn the value to 'off'. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.33 |
ethOamServiceTable
table.1.3.6.1.4.1.164.3.1.6.1.3.2.1
·
1 row entry
·
23 columns
Service configuration table associated with Services running on a MEP.
An entry in the table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ethOamServiceIdx
This object indicates the Index of the service being accessed.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.1 |
||||||||||||
|
ethOamServiceRowStatus
This attribute allows to create/delete a row in this table.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.2 |
||||||||||||
|
ethOamServicePriority
This object determines the priority of the service.
It is sent as P bits in an OAM message originated by this service. |
Unsigned32r/w | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.3 |
||||||||||||
|
ethOamServicePmEnable
This object determines PM (Performance Monitoring)
shall be enabled or not for the service. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.4 |
||||||||||||
|
ethOamServiceFrameLossRatioThresh
This object determines the Frame Loss ratio threshold in exponent
of 1/10. That is, a value of 4 means that the threshold is 1E-4. |
Integer32r/w | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.5 |
||||||||||||
|
ethOamServiceDelayThresh
This object determines the delay threshold defined for this service,
in measurement unit of 0.1 msec. |
Integer32r/w | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.6 |
||||||||||||
|
ethOamServiceDelayVarThresh
This object determines the delay variation threshold defined
for this service, in measurement unit of 0.1 msec. |
Integer32r/w | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.7 |
||||||||||||
|
ethOamServiceUnavailRatioThresh
This object determines the Unavailability ratio threshold in exponent
of 1/10. That is, a value of 4 means that the threshold is 1E-4. |
Integer32r/w | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.8 |
||||||||||||
|
ethOamServiceTxFrames
Counts the number of frames trnasmitted by since the time the service is up.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.9 |
||||||||||||
|
ethOamServiceOverflowTxFrames
The number of times the associated
ethOamServiceTxFrames counter has overflowed. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.10 |
||||||||||||
|
ethOamServiceFrameLoss
Counts the number of frames lost since the time the service is up.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.11 |
||||||||||||
|
ethOamServiceOverflowFrameLoss
The number of times the associated
ethOamServiceFrameLoss counter has overflowed. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.12 |
||||||||||||
|
ethOamServiceFrameLossRatio
Indicates the ratio of the lost frames since the time the service is up.
The value is the ratio multiplied by 1E10. 0xFFFFFFFF will be returned for ratio greater than 4/10 (40%). |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.13 |
||||||||||||
|
ethOamServiceElapsedTime
Indicates the time elapsed in seconds since the time the service is up.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.14 |
||||||||||||
|
ethOamServiceUnavailSec
Indicates the number of unavailable seconds since
the time the service is up. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.15 |
||||||||||||
|
ethOamServiceUnavailRatio
Indicates the ratio of the unavailable seconds since the
time the service is up. The value is the ratio multiplied by 1E10. 0xFFFFFFFF will be returned for ratio greater than 4/10 (40%). |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.16 |
||||||||||||
|
ethOamServiceFramesAboveDelay
Indicates the number of frames arrived with delay
greater than the delay threshold. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.17 |
||||||||||||
|
ethOamServiceOverflowFramesAboveDelay
Indicates the number of times the associated
ethOamServiceFramesAboveDelay counter has overflowed. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.18 |
||||||||||||
|
ethOamServiceFramesAboveDelayVar
Indicates the number of frames arrived with delay variation
greater than the delay variation threshold. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.19 |
||||||||||||
|
ethOamServiceOverflowFramesAboveDelayVar
Indicates the number of times the associated
ethOamServiceFramesAboveDelayVar counter has overflowed. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.20 |
||||||||||||
|
ethOamServiceCurrentDelay
Indicates the last measured delay sample in msec.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.21 |
||||||||||||
|
ethOamServiceCurrentDelayVariation
Indicates the last measured delay variation sample in msec.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.22 |
||||||||||||
|
ethOamServiceResetCounters
Reset the running PM counters of the selected service.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.23 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.2
·
1 row entry
·
13 columns
Service Current Statistics Table.
Current Statistics per service
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ethOamSvcCurrFramesAboveDelayThresh
Number of frames that arrived in the current interval
at a delay greater than the threshold value defined for the service. |
PerfHist-TC-MIBPerfCurrentCount Constraints: range: 1-43Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.1 |
||||||||||
|
ethOamSvcCurrFramesBelowDelayThresh
Number of frames that arrived in the current interval at a delay
lower than or equal to the threshold value defined for the service. |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.2 |
||||||||||
|
ethOamSvcCurrFramesAboveDVarThresh
Number of frames that arrived in the current interval at a delay
variation greater than the threshold value defined for the service. |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.3 |
||||||||||
|
ethOamSvcCurrFramesBelowDVarThresh
Number of frames that arrived in the current interval
at a delay variation lower than or equal to the threshold value defined for the service. |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.4 |
||||||||||
|
ethOamSvcCurrFramesTxCounter
Number of trnasmitted frames in the current interval.
|
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.5 |
||||||||||
|
ethOamSvcCurrFramesLossCounter
Number of lost frames in the current interval.
|
PerfHist-TC-MIBPerfCurrentCount Constraints: range: 0-255Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.6 |
||||||||||
|
ethOamSvcCurrMinRoundTripDelay
The mininal value of round trip delay in the current interval.
Values units are of 0.1 msec. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.7 |
||||||||||
|
ethOamSvcCurrMaxRoundTripDelay
The maximum value of round trip delay in the current interval.
Values units are of 0.1 msec. |
SNMPv2-SMIUnsigned32 Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.8 |
||||||||||
|
ethOamSvcCurrAvgRoundTripDelay
The average round trip delay in the current interval.
Values units are of 0.1 msec. |
SNMPv2-SMIUnsigned32 Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.9 |
||||||||||
|
ethOamSvcCurrMaxRoundTripDVar
The maximum value of round trip delay variation in the current interval.
Values units are of 0.1 msec. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.10 |
||||||||||
|
ethOamSvcCurrAvgRoundTripDVar
The average round trip delay variation in the current interval.
Values units are of 0.1 msec. |
SNMPv2-SMIUnsigned32 Constraints: range: 1-255Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.11 |
||||||||||
|
ethOamSvcCurrElapsedTime
The number of seconds that have elapsed since
the beginning of the current interval. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.12 |
||||||||||
|
ethOamSvcCurrUnavailSec
The number of seconds that the service was unavailable in the current interval.
|
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.13 |
ethOamSvcIntervalTable
table.1.3.6.1.4.1.164.3.1.6.1.3.2.3
·
1 row entry
·
13 columns
Service Interval Statistics Table.
Interval Statistics per service
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ethOamSvcIntervalNum
The Interval index, which is actualy the Interval number,
where 1 is the most recently completed 15 minute interval, and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals exist). |
Integer32 | .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.1 |
||||||||||||||||
|
ethOamSvcIntervalFramesAboveDelayThresh
Number of frames that arrived in a delay greater than the
threshold value defined for the service in the selected interval. |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.2 |
||||||||||||||||
|
ethOamSvcIntervalFramesBelowDelayThresh
Number of frames that arrived in a delay lower than the
threshold value defined for the service in the selected interval. |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.3 |
||||||||||||||||
|
ethOamSvcIntervalFramesAboveDVarThresh
Number of frames that arrived in a delay variation greater than the
threshold value defined for the service in the selected interval. |
PerfHist-TC-MIBPerfIntervalCount Enumerated Values:
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.4 |
||||||||||||||||
|
ethOamSvcIntervalFramesBelowDVarThresh
Number of frames that arrived in a delay variation lower than the
threshold value defined for the service in the selected interval. |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.5 |
||||||||||||||||
|
ethOamSvcIntervalFramesTxCounter
Number of trnasmitted frames in the selected interval.
|
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.6 |
||||||||||||||||
|
ethOamSvcIntervalFramesLossCounter
Number of lost frames in the selected interval.
|
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.7 |
||||||||||||||||
|
ethOamSvcIntervalMinRoundTripDelay
The mininal value of round trip delay in the selected interval.
Values units are of 0.1 msec. |
SNMPv2-SMIUnsigned32 Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.8 |
||||||||||||||||
|
ethOamSvcIntervalMaxRoundTripDelay
The maximum value of round trip delay in the selected interval.
Values units are of 0.1 msec. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.9 |
||||||||||||||||
|
ethOamSvcIntervalAvgRoundTripDelay
The average round trip delay in the selected interval.
Values units are of 0.1 msec. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.10 |
||||||||||||||||
|
ethOamSvcIntervalMaxRoundTripDVar
The maximum value of round trip delay variation in the selected interval.
Values units are of 0.1 msec. |
SNMPv2-SMIUnsigned32 Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.11 |
||||||||||||||||
|
ethOamSvcIntervalAvgRoundTripDVar
The average round trip delay variation in the selected interval.
Values units are of 0.1 msec. |
SNMPv2-SMIUnsigned32 Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.12 |
||||||||||||||||
|
ethOamSvcIntervalUnavailSec
The number of seconds that the service was unavailable
in the selected interval. |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.13 |
ethOamSvcTotalTable
table.1.3.6.1.4.1.164.3.1.6.1.3.2.4
·
1 row entry
·
12 columns
ETH OAM Service Total (24H) Statistics Table.
Total Statistics per service
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ethOamSvcTotalFramesAboveDelayThresh
Number of frames that arrived in a delay greater than the
threshold value defined for the service in the last 24H. |
PerfHist-TC-MIBPerfTotalCount Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.1 |
||||||||||||||||
|
ethOamSvcTotalFramesBelowDelayThresh
Number of frames that arrived in a delay lower than the
threshold value defined for the service in the last 24H. |
PerfHist-TC-MIBPerfTotalCount Enumerated Values:
Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.2 |
||||||||||||||||
|
ethOamSvcTotalFramesAboveDVarThresh
Number of frames that arrived in a delay variation greater than the
threshold value defined for the service in the last 24H. |
PerfHist-TC-MIBPerfTotalCount Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.3 |
||||||||||||||||
|
ethOamSvcTotalFramesBelowDVarThresh
Number of frames that arrived in a delay variation lower than the
threshold value defined for the service in the last 24H. |
PerfHist-TC-MIBPerfTotalCount Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.4 |
||||||||||||||||
|
ethOamSvcTotalFramesTxCounter
Number of trnasmitted frames in the last 24H.
|
PerfHist-TC-MIBPerfTotalCount Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.5 |
||||||||||||||||
|
ethOamSvcTotalFramesLossCounter
Number of lost frames in the last 24H.
|
PerfHist-TC-MIBPerfTotalCount Enumerated Values:
Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.6 |
||||||||||||||||
|
ethOamSvcTotalMinRoundTripDelay
The mininal value of round trip delay in the last 24H.
Values units are of 0.1 msec. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.7 |
||||||||||||||||
|
ethOamSvcTotalMaxRoundTripDelay
The maximum value of round trip delay in the last 24H.
Values units are of 0.1 msec. |
SNMPv2-SMIUnsigned32 Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.8 |
||||||||||||||||
|
ethOamSvcTotalAvgRoundTripDelay
The average round trip delay in the last 24H.
Values units are of 0.1 msec. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.9 |
||||||||||||||||
|
ethOamSvcTotalMaxRoundTripDVar
The maximum value of round trip delay variation in the last 24H.
Values units are of 0.1 msec. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.10 |
||||||||||||||||
|
ethOamSvcTotalAvgRoundTripDVar
The average round trip delay variation in the last 24H.
Values units are of 0.1 msec. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.11 |
||||||||||||||||
|
ethOamSvcTotalUnavailSec
The number of seconds that the service was unavailable
in the last 24H. |
PerfHist-TC-MIBPerfTotalCount Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.12 |
radMdTable
table.1.3.6.1.4.1.164.3.1.6.1.3.3
·
1 row entry
·
4 columns
The MaintenanceDomain table. Each row in the table represents
a different maintenance domain.
A Maintenance domain is described in 802.1ag (3.22) as the
network or the part of the network for which faults in
connectivity are to be managed. The boundary of a Maintenance
Domain is defined by a set of DSAPs, each of which can become
a point of connectivity to a service instance.
The Maintenance Domain table entry. This entry is not lost
upon reboot. It is backed up by stable storage
upon reboot. It is backed up by stable storage
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
radMdIndex
The index to the maintenance domain table.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.3.1.1 |
||||||||||||||||||
|
radMdFormat
The type (and thereby format) of the Maintenance Domain Name.
|
Enumerationr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.1.6.1.3.3.1.2 |
||||||||||||||||||
|
radMdName
The Maintenance Domain name. The type/format of this object
is determined by the value of the radMdNameType object. Each Maintenance Domain has unique name amongst all those used or available to a servi… |
OctetStringr/w | .1.3.6.1.4.1.164.3.1.6.1.3.3.1.3 |
||||||||||||||||||
|
radMdRowStatus
This attribute allows to create/delete a row in this table.
The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated. |
SNMPv2-TCRowStatusr/w Enumerated Values:
Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.3.1.6.1.3.3.1.4 |
radMepLtrTable
table.1.3.6.1.4.1.164.3.1.6.1.3.4
·
1 row entry
·
10 columns
This table contains a list of Linktrace replies received by a specific MEP in response to a linktrace message.
The LinktraceReply table entry.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
radMepLtrReceiveOrder
An index to distinguish among multiple LTRs with the same LTR
Transaction Identifier field value. radMepLtrReceiveOrder are assigned sequentially from 1, in the order that the Linktrace Initiator received the LTRs. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.4.1.1 |
||||||||||||||||||
|
radMepLtrTtl
TTL field value for a returned LTR.
|
Unsigned32 | .1.3.6.1.4.1.164.3.1.6.1.3.4.1.2 |
||||||||||||||||||
|
radMepLtrMacAddr
The MAC address in the header of the returned LTR.
|
MacAddress Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.3.1.6.1.3.4.1.3 |
||||||||||||||||||
|
radMepLtrRelay
The value returned in the Relay Action field:
rlyHit - the LTM reached an MP whose MAC address matches the target MAC address. rlyFdb - the Egress Port was determined by consulting the Filtering Database. rlyMpdb - the … |
Enumeration Constraints: range: 1-4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.4.1.4 |
||||||||||||||||||
|
radMepLtrIngress
The value returned in the Ingress Action Field of the LTM.
ingNoTlv - no Reply Ingress TLV was returned in the LTM. ingOK - the target data frame would be passed through to the MAC Relay Entity. ingDown - the Bridge Por… |
Enumeration | .1.3.6.1.4.1.164.3.1.6.1.3.4.1.5 |
||||||||||||||||||
|
radMepLtrIngressPortIdSubtype
The format of the Ingress Port ID.
If the radMepLtrIngress object contains the value egrNoTlv(1), then the contents of this object are meaningless. 802.1ag clauses 12.14.7.5.3:m and 20.36.2.8 |
LLDP-MIBLldpPortIdSubtype Enumerated Values:
Textual Convention: LLDP-MIBLldpPortIdSubtype EnumerationType Values:
|
.1.3.6.1.4.1.164.3.1.6.1.3.4.1.6 |
||||||||||||||||||
|
radMepLtrIngressPortId
Ingress Port ID. This is an alpha-numeric string that contains a
specific identifier for the port. The format of this object is determined by the value of the radMepLtrIngressPortIdSubtype object. If the radMepLtrIngr… |
OctetString Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.1.3.4.1.7 |
||||||||||||||||||
|
radMepLtrEgress
The value returned in the Egress Action Field of the LTM.
The value egrNoTlv(1) indicates that no Reply Egress TLV was returned in the LTM. 802.1ag clauses 12.14.7.5.3:o and 20.36.2.10 |
Enumeration | .1.3.6.1.4.1.164.3.1.6.1.3.4.1.8 |
||||||||||||||||||
|
radMepLtrEgressPortIdSubtype
The format of the egress Port ID.
If the radMepLtrEgress object contains the value egrNoTlv(1), then the contents of this object are meaningless. 802.1ag clauses 12.14.7.5.3:q and 20.36.2.12 |
LLDP-MIBLldpPortIdSubtype Textual Convention: LLDP-MIBLldpPortIdSubtype EnumerationType Values:
|
.1.3.6.1.4.1.164.3.1.6.1.3.4.1.9 |
||||||||||||||||||
|
radMepLtrEgressPortId
Egress Port ID. The format of this object is determined by
the value of the radMepLtrEgressPortIdSubtype object. If the radMepLtrEgress object contains the value egrNoTlv(1), then the contents of this object are meaning… |
OctetString | .1.3.6.1.4.1.164.3.1.6.1.3.4.1.10 |
radMepCcStatusTable
table.1.3.6.1.4.1.164.3.1.6.1.3.5
·
1 row entry
·
4 columns
This table contains a list of CC Status received by a specific MEP from different Remote MEPs.
An entry in the CC Status Table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
radMepRemoteMepIdx
This is a running index for arriving CC messages (from different Remote MEPs)
for a specific MEP ID. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.5.1.1 |
|
radMepCcStatusRemMepId
This attribute indicates the Remote MEP ID from which the CC
messages has arrived. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.5.1.2 |
|
radMepCcStat
This object indicates the Continuity Check (CC) status (ITU-T Y.1731, Appendix I):
mismerge - A MEP detects a Mismerge condition when a CCM frame arrives with the correct MEG level, but incorrect MEG ID. unexpected… |
Enumeration | .1.3.6.1.4.1.164.3.1.6.1.3.5.1.3 |
|
radMepCcStatusMacAddr
This object indicates the MAC Address in the
CC Status message received. |
MacAddress Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.3.1.6.1.3.5.1.4 |
dot1agXCfmMdTable
table.1.3.6.1.4.1.164.3.1.6.1.3.8
·
1 row entry
·
1 columns
The Maintenance Domain table. Each row in the table represents a different maintenance association.
The Maintenance Domain table entry.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
dot1agXCfmMdProtocol
.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.3.8.1.1 |
dot1agXCfmMepTable
table.1.3.6.1.4.1.164.3.1.6.1.3.9
·
1 row entry
·
4 columns
The Maintenance Association End Point (MEP) table.
The MEP table entry
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
dot1agXCfmMepContinuityVerMode
This object determines the OAM behavior of the MEP:
disabled - no Continuity Verification is done cc_based - Continuity Verification is done based on incoming CC messages lb_based - Continuity Verification is done base… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.1.3.9.1.1 |
||||||
|
dot1agXCfmMepDestAddrType
This object determines if the OAM messages are sent to user defined
unicast address, or to RAD proprietary multicast address. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.1.3.9.1.2 |
||||||
|
dot1agXCfmMepDestMacAddr
This object determines the MAC address that OAM packets are sent to.
|
MacAddressr/w Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.3.1.6.1.3.9.1.3 |
||||||
|
dot1agXCfmMepMappingProfile
This attribute defines the Mapping/classification profile (flowMappingProfileTable )
assigned to this Mep. |
SNMPv2-SMIUnsigned32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.3.9.1.4 |
dot1agXCfmMepDbTable
table.1.3.6.1.4.1.164.3.1.6.1.3.10
·
1 row entry
·
1 columns
The MEP DB table
The MEP Database table entry.
Indexes
ethIfSrcMacCtrlAddrIndex ethIfSrcMacCtrlAddr ethIfSrcMacCtrlAddrIdx3
| Column | Syntax | OID |
|---|---|---|
|
dot1agXCfmMepCcStat
This object indicates the Continuity Check (CC) status (ITU-T Y.1731, Appendix I):
mismerge - A MEP detects a Mismerge condition when a CCM frame arrives with the correct MEG level, but incorrect MEG ID. unexpected… |
Enumeration | .1.3.6.1.4.1.164.3.1.6.1.3.10.1.1 |
ethIfRingTable
table.1.3.6.1.4.1.164.3.1.6.1.4.1
·
1 row entry
·
9 columns
Ethernet Ring Table.
An entry in the table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
ethIfRingIdx
This object is an Index that can indicate
Slot, Ring, Cnfg etc., according to the device used. When NA, 1 will be used. |
SNMPv2-SMIUnsigned32 Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.4.1.1.1 |
||||||
|
ethIfRingAdminStatus
This object denotes the Ethernet Ring administrative status.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.1.4.1.1.2 |
||||||
|
ethIfRingPorts
The set of ports which are assigned to be ring members.
The default value of this object is a string of zeros. |
Q-BRIDGE-MIBPortListr/w Textual Convention: Q-BRIDGE-MIBPortList OctetString |
.1.3.6.1.4.1.164.3.1.6.1.4.1.1.3 |
||||||
|
ethIfRingOperStatus
This object indicates the Ethernet Ring operational status.
|
Enumeration | .1.3.6.1.4.1.164.3.1.6.1.4.1.1.4 |
||||||
|
ethIfRingKeepAliveInterval
This parameter indicates the period of time (in msec.)
between two consequent Keep Alive messages. |
SNMPv2-SMIUnsigned32r/w Constraints: range: 0-899Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.4.1.1.5 |
||||||
|
ethIfRingKeepAliveThresh
This parameter indicates the maximum number of
missed Keep Alive answer messages acceptable, after which link status will be failed. |
SNMPv2-SMIUnsigned32r/w Constraints: range: 0-96Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.4.1.1.6 |
||||||
|
ethIfRingKeepAliveVlanId
Dedicated VLAN ID for keep alive messages.
|
SNMPv2-SMIUnsigned32r/w Constraints: range: 1-1Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.4.1.1.7 |
||||||
|
ethIfRingMultiCastVlanId
Dedicated VLAN ID for multicast messages.
|
SNMPv2-SMIUnsigned32r/w Constraints: range: 1-1Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.4.1.1.8 |
||||||
|
ethIfRingRowStatus
Implement creation/deletion of rings in the device.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.4.1.1.9 |
ethIfStormTable
table.1.3.6.1.4.1.164.3.1.6.1.5.1
·
1 row entry
·
6 columns
Ethernet Storming Table.
An entry in the table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
ethIfStormCnfgIdx
This attribute indicates the Idx of the Cnfg(1..255) being
accessed ; Idx of 255 relates to the TmpCnfg. |
Unsigned32 | .1.3.6.1.4.1.164.3.1.6.1.5.1.1.1 |
|
ethIfStormIfIdx
A unique index of the ethernet interface/port.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.5.1.1.2 |
|
ethIfStormDirection
This object indicates the port's Storm Direction.
|
Enumeration | .1.3.6.1.4.1.164.3.1.6.1.5.1.1.3 |
|
ethIfStormPacketType
Packet Type on which Storming operations will be performed.
|
Bits | .1.3.6.1.4.1.164.3.1.6.1.5.1.1.4 |
|
ethIfStormCtrlEnable
This object indicates if the Storm Controling is Enabled or Disabled
for the relevant entry. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.5.1.1.5 |
|
ethIfStormMaxRate
This object indicates the Maximum Rate at which Storming packets are forwarded,
in Kbps.For some devices the units are PPS(Packets Per Second ) or kilobytes per second. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.5.1.1.6 |
dot3OamDescrTable
table.1.3.6.1.4.1.164.3.1.6.1.6.1
·
1 row entry
·
5 columns
This table supports definitions of Descriptors (profiles) of OAM EFM Links.
Each entry corresponds to a single OAM EFM Descriptor (profile).
Each Descriptor contains a set of OAM EFM Link configuration
parameters. The configuration parameters are applied to the
OAM EFM Links referencing thi…
Each Descriptor contains a set of OAM EFM Link configuration
parameters. The configuration parameters are applied to the
OAM EFM Links referencing thi…
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
dot3OamDescrId
This object is the unique index associated with this Descriptor (profile).
Entries in this table are referenced via the object dot3OamXDescrId in dot3OamXEntry. |
Unsigned32 | .1.3.6.1.4.1.164.3.1.6.1.6.1.1.1 |
||||||||||||
|
dot3OamDescrRowStatus
This object controls creation/deletion of the associated entry in this table
per the semantics of RowStatus. If an active entry is referenced in dot3OamXDescrId, the entry MUST remain active until all references are … |
SNMPv2-TCRowStatusr/w Constraints: range: 4-4Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.3.1.6.1.6.1.1.2 |
||||||||||||
|
dot3OamDescrMode
This object controls the mode of OAM operation for an Ethernet-like interface
referencing this Descriptor. OAM on Ethernet interfaces may be in 'active' mode or 'passive' mode. These two modes differ in that active … |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.6.1.1.3 |
||||||||||||
|
dot3OamDescrLbRxOperation
Since OAM loopback is a disruptive operation (user traffic does not pass),
this object provides a mechanism to provide control: whether received OAM loopback commands are processed or ignored, for the OAM Link referen… |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.6.1.1.4 |
||||||||||||
|
dot3OamDescrRateLimit
This object defines how many OAM frames can be sent per second (maximum)
for an OAM EFM Link referencing this Descriptor. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.6.1.1.5 |
dot3OamXTable
table.1.3.6.1.4.1.164.3.1.6.1.6.2
·
1 row entry
·
2 columns
This table is an extension of dot3OamTable of standard DOT3-OAM-MIB.
An entry in dot3OamXTable.
Indexes
IF-MIBifIndex prtSonetLineIntervalNumber
| Column | Syntax | OID |
|---|---|---|
|
dot3OamXDescrId
This object points to an entry of dot3OamDescrTable (dot3OamDescrId),
which defines part of the configuration parameters for this OAM EFM Link. As long as one of the OAM EFM Links refers an entry in the dot3OamDescrTab… |
Unsigned32r/w Constraints: range: 1-96 |
.1.3.6.1.4.1.164.3.1.6.1.6.2.1.1 |
|
dot3OamXPeerState
This object reports the state of the Peer of the OAM EFM Link.
unknown - at the initialization of the device, or after Reset, when there is still no data about the peer's state. operational - usually after u… |
Enumeration | .1.3.6.1.4.1.164.3.1.6.1.6.2.1.2 |
ethIfSrcMacCtrlTable
table.1.3.6.1.4.1.164.3.1.6.1.7.1
·
1 row entry
·
11 columns
This table supports source MAC addresses control parameters per interface. Source MAC control will be used mainly for security. Only packets with certain source MAC Addresses will be allowed to access the device. The source MAC addresses can be static or learned. The static addresses will be defined by the user in another table: ethIfSrcMacCtrlAddrTable. The learned addresses will exist in the ethIfSrcMacCtrlAddrTable as well.
An entry in the table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
ethIfSrcMacCtrlIndex
The index of the MAC Layer interface supporting source MAC control feature.
It may be the ifIndex of the ETH/Bridge Port. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.7.1.1.1 |
|
ethIfSrcMacCtrlIdx2
A second index that can be used. For example: The VLAN ID for which the source MAC
control feature is supported. When this index is not in use, its value will be: 9999. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.7.1.1.2 |
|
ethIfSrcMacCtrl
Enable or disable the source MAC control on the current interface.
The device should not enable source MAC control if for the current interface there are more than ethIfSrcMacCtrlMaxPermitAddr addresses in the ethIfSrcM… |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.7.1.1.3 |
|
ethIfSrcMacCtrlMaxPermitAddr
This is the maximum number of permitted MAC addresses (static and learned) for the
current interface. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.7.1.1.4 |
|
ethIfSrcMacCtrlCurNumPermitAddr
This is the number of source MAC addresses currently permitted for the
current interface. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.7.1.1.5 |
|
ethIfSrcMacCtrlFlushAddrCmd
When set to on (3) this command will erase all the learned addresses and invalid
addresses of the selected interface in the ethIfSrcMacCtrlAddrTable. After operation is finished, Agent will turn the value to 'off'. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.7.1.1.6 |
|
ethIfSrcMacCtrlAging
The timeout period in seconds for aging out dynamically learned source MAC addresses.
Valid Values: 0 - disable 10-1000000 |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.7.1.1.7 |
|
ethIfSrcMacCtrlLocking
When set to lock (3) this command will lock the Source MAC Address learning.
No more learned addresses will be added to the ethIfSrcMacCtrlAddrTable. When set to unlock (2) this command will unlock the Source MAC Addres… |
Enumerationr/w Constraints: range: 4-4 |
.1.3.6.1.4.1.164.3.1.6.1.7.1.1.8 |
|
ethIfSrcMacCtrlViolationAction
Determines the action that the device will take upon security violation.
drop(2) - the violating packets will be dropped. dropNotify (3)- the violating packets will be dropped and notifications … |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.7.1.1.9 |
|
ethIfSrcMacCtrlLastViolatingAddr
This object indicates the last MAC address that violated the security
on the current interface. If no violation, the agent will return: 00-00-00-00-00-00 . |
MacAddressr/w Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.3.1.6.1.7.1.1.10 |
|
ethIfSrcMacCtrlPortStatus
This object represents the operational status of the MAC Control feature
on an interface. shutdown(2) - This indicates that the port is shutdown due to security violation. secureActive (3) - T… |
Enumeration | .1.3.6.1.4.1.164.3.1.6.1.7.1.1.11 |
ethIfSrcMacCtrlAddrTable
table.1.3.6.1.4.1.164.3.1.6.1.7.2
·
1 row entry
·
5 columns
This table shows which MAC Addresses are permitted when the source MAC control is enabled and which non permitted MAC Addresses attempted to access the current interface. It contains static source MAC Addresses as well as learned MAC Addresses. The user can configure Static permitted source MAC Addresses via this table.
An entry in the table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
ethIfSrcMacCtrlAddrIndex
The index of the interface for which the source MAC addresses exist in this table.
It may be the ifIndex of the ETH/Bridge Port. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.7.2.1.1 |
|
ethIfSrcMacCtrlAddr
A unicast source MAC address that was learned or statically configured for the current
interface. Packets with this source MAC address will be accepted by the device. |
MacAddress Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.3.1.6.1.7.2.1.2 |
|
ethIfSrcMacCtrlAddrIdx3
A third index that can be used. For example: The VLAN ID for which the source MAC control
feature is supported. When this index is not in use, its value will be: 9999. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.1.7.2.1.3 |
|
ethIfSrcMacCtrlAddrRowStatus
This MIB object will be used in order to create/delete a static row
or delete an address that is not allowed to access the current interface (ethIfSrcMacCtrlAddrStatus= invalid(2)). Device will add the learned address… |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.1.7.2.1.4 |
|
ethIfSrcMacCtrlAddrStatus
The status of this entry. The meanings of the values are:
invalid (2) - the current address is not allowed to access this interface. learned(3) - the current address was learned. mgmt (5) - the current addres… |
Enumeration | .1.3.6.1.4.1.164.3.1.6.1.7.2.1.5 |
prtSonetMediumTable
table.1.3.6.1.4.1.164.3.1.6.2.1.1
·
1 row entry
·
4 columns
The SONET Medium table.
An entry in the SONET Medium table. ifIndex of the
lowest SONET layer of type sonet(39).
lowest SONET layer of type sonet(39).
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
prtSonetMediumTimeElapsed
The number of seconds that have elapsed since
the beginning of the near end current error- measurement period. |
Integer32 | .1.3.6.1.4.1.164.3.1.6.2.1.1.1.1 |
|
prtSonetMediumValidIntervals
The number of previous near end intervals for
which valid data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complet… |
Integer32 | .1.3.6.1.4.1.164.3.1.6.2.1.1.1.2 |
|
prtSonetMediumSsmRX
This parameter indicates SSM RX value (quality level of clock signal).
SSM (Synchronization Status Messages) octet is encoded as follows: Bit1 = '1' - indicates all octet is Not Applicable Bits 8-5 (when bit1=0): … |
OctetString | .1.3.6.1.4.1.164.3.1.6.2.1.1.1.3 |
|
prtSonetMediumSsmTX
This parameter indicates SSM TX value (quality level of clock signal).
SSM (Synchronization Status Messages) octet is encoded the same as prtSonetMediumSsmRX. |
OctetString Constraints: range: 1-96 |
.1.3.6.1.4.1.164.3.1.6.2.1.1.1.4 |
.1.3.6.1.4.1.164.3.1.6.2.1.2
·
1 row entry
·
14 columns
The SONET Section/Line Current table.
An entry in the SONET Section/Line Current table.
ifIndex of the section/line SONET layer of type
sonet(39).
ifIndex of the section/line SONET layer of type
sonet(39).
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
prtSonetCurrentLOS
The counter associated with the number of LOS
seconds, encountered by a SONET interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.1.2.1.1 |
|
prtSonetCurrentLOF
The counter associated with the number of LOF
seconds, encountered by a SONET interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.1.2.1.2 |
|
prtSonetCurrentLineAIS
The counter associated with the number of Line AIS
seconds, encountered by a SONET interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.1.2.1.3 |
|
prtSonetCurrentLineFERF
The counter associated with the number of Line
FERF seconds, encountered by a SONET interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.1.2.1.4 |
|
prtSonetCurrentSectionBIP
The counter associated with the number of Section
BIP errors, encountered by a SONET interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.1.2.1.5 |
|
prtSonetCurrentLineBIP
The counter associated with the number of Line
BIP errors, encountered by a SONET interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.1.2.1.6 |
|
prtSonetCurrentLineFEBE
The counter associated with the number of Line
FEBE errors, encountered by a SONET interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.1.2.1.7 |
|
prtSonetCurrentUAS
The counter associated with the number of UAS
encountered by a SONET interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.1.2.1.8 |
|
prtSonetCurrentSES
The counter associated with the number of SES
encountered by a SONET interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Constraints: range: 1-63Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.1.2.1.9 |
|
prtSonetCurrentES
The number of Errored Seconds, encountered by a
SONET interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Constraints: range: 1-63Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.1.2.1.10 |
|
prtSonetCurrentStatus
The statuses of the current interval:
0 - O.K. 1 - The link has been switched by a redundancy mechanism. 2 - Module is in/out. 4 - Empty - card is out. |
OctetString | .1.3.6.1.4.1.164.3.1.6.2.1.2.1.11 |
|
prtSonetCurrentLSV
The counter associated with the number of LSV
seconds (Line Symbol Violation), encountered by a SONET interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.1.2.1.12 |
|
prtSonetCurrentXStatus
This variable indicates the Status of the interface.
It contains failure state information. The variable is a bit map represented as a sum, therefore, it can represent multiple failures simultaneously. The sonetSe… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.2.1.2.1.13 |
|
prtSonetCurrentLineRDI
The counter associated with the number of Line RDI
seconds, encountered by a SONET interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.1.2.1.14 |
.1.3.6.1.4.1.164.3.1.6.2.1.3
·
1 row entry
·
14 columns
The Section/Line Interval table.
An entry in the SONET Section/Line Interval table.
ifIndex of the section/line SONET layer of type
sonet(39).
ifIndex of the section/line SONET layer of type
sonet(39).
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
prtSonetLineIntervalNumber
A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid). |
Integer32 | .1.3.6.1.4.1.164.3.1.6.2.1.3.1.1 |
|
prtSonetIntervalLOS
The counter associated with the number of LOS
seconds , encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.1.3.1.2 |
|
prtSonetIntervalLOF
The counter associated with the number of LOF
seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.1.3.1.3 |
|
prtSonetIntervalLineAIS
The counter associated with the number of Line
AIS seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.1.3.1.4 |
|
prtSonetIntervalLineFERF
The counter associated with the number of Line
FERF seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Constraints: range: 1-64Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.1.3.1.5 |
|
prtSonetIntervalSectionBIP
The counter associated with the number of Section
BIP errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.1.3.1.6 |
|
prtSonetIntervalLineBIP
The counter associated with the number of Line
BIP errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.1.3.1.7 |
|
prtSonetIntervalLineFEBE
The counter associated with the number of Line
FEBE errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Constraints: range: 1-96Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.1.3.1.8 |
|
prtSonetIntervalUAS
The counter associated with the number of UAS
encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Constraints: range: 1-64Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.1.3.1.9 |
|
prtSonetIntervalSES
The counter associated with the number of SES
encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Constraints: range: 1-64Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.1.3.1.10 |
|
prtSonetIntervalES
The number of Errored Seconds, encountered by a
SONET interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.1.3.1.11 |
|
prtSonetIntervalStatus
The statuses of the current interval:
0 - O.K. 1 - The link has been switched by a redundancy mechanism. 2 - Module is in/out. 4 - Empty - card is out. |
OctetString | .1.3.6.1.4.1.164.3.1.6.2.1.3.1.12 |
|
prtSonetIntervalLSV
The counter associated with the number of LSV seconds
(Line Symbol Violation), encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.1.3.1.13 |
|
prtSonetIntervalLineRDI
The counter associated with the number of Line
RDI seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.1.3.1.14 |
prtSonetPathCurrentTable
table.1.3.6.1.4.1.164.3.1.6.2.1.4
·
1 row entry
·
9 columns
The SONET Path Current table.
An entry in the SONET Path Current table.
ifIndex of the Path SONET layer of type
sonetPath(50).
ifIndex of the Path SONET layer of type
sonetPath(50).
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
prtSonetCurrentPathAIS
The counter associated with the number of Path AIS
seconds, encountered by a SONET interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.1.4.1.1 |
|
prtSonetCurrentPathFERF
The counter associated with the number of Path FERF
seconds, encountered by a SONET interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.1.4.1.2 |
|
prtSonetCurrentLOP
The counter associated with the number LOP
seconds, encountered by a SONET interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.1.4.1.3 |
|
prtSonetCurrentSLM
The counter associated with the number of SLM
seconds, encountered by a SONET interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.1.4.1.4 |
|
prtSonetCurrentLOC
The counter associated with the number of LOC
seconds, encountered by a SONET interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.1.4.1.5 |
|
prtSonetCurrentPathBIP
The counter associated with the number of Path
BIP errors, encountered by a SONET interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.1.4.1.6 |
|
prtSonetCurrentPathFEBE
The counter associated with the number of Path
FEBE errors, encountered by a SONET interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.1.4.1.7 |
|
prtSonetPathCurrentStatus
This variable indicates the Status of the interface.
It contains failure state information. The variable is a bit map represented as a sum, therefore, it can represent multiple failures simultaneously. The sonetPa… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.2.1.4.1.8 |
|
prtSonetCurrentPathRDI
The counter associated with the number of Path RDI
seconds, encountered by a SONET interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.1.4.1.9 |
.1.3.6.1.4.1.164.3.1.6.2.1.5
·
1 row entry
·
9 columns
The Path Interval table.
An entry in the SONET Path Interval table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
prtSonetPathIntervalNumber
A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid). |
Integer32 | .1.3.6.1.4.1.164.3.1.6.2.1.5.1.1 |
|
prtSonetIntervalPathAIS
The counter associated with the number of Path
AIS seconds , encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.1.5.1.2 |
|
prtSonetIntervalPathFERF
The counter associated with the number of Path
FERF seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.1.5.1.3 |
|
prtSonetIntervalLOP
The counter associated with the number of LOP
seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.1.5.1.4 |
|
prtSonetIntervalSLM
The counter associated with the number of SLM
seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.1.5.1.5 |
|
prtSonetIntervalLOC
The counter associated with the number of LOC
seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.1.5.1.6 |
|
prtSonetIntervalPathBIP
The counter associated with the number of Path
BIP errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.1.5.1.7 |
|
prtSonetIntervalPathFEBE
The counter associated with the number of Path
FEBE errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.1.5.1.8 |
|
prtSonetIntervalPathRDI
The counter associated with the number of Path
RDI seconds , encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.1.5.1.9 |
virtualIfCurrentTable
table.1.3.6.1.4.1.164.3.1.6.2.1.6.1
·
1 row entry
·
13 columns
The Virtual Interface Current table.
An entry in the Virtual Interface Current table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
virtualIfCurrentMinActiveVC
This object holds the minimum number of active virtual containers (VCs)
of the Virtual Concatenation Group in the current 15-minute interval. |
Integer32 | .1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.1 |
|
virtualIfCurrentMaxActiveVC
This object holds the maximum number of active virtual containers (VCs)
of the Virtual Concatenation Group in the current 15-minute interval. |
Integer32 | .1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.2 |
|
virtualIfCurrentRxFrames
This counter is associated with the number of frames received from STS-3/STM-1
by a Virtual Interface in the current 15-minute interval. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.3 |
|
virtualIfCurrentTxFrames
This counter is associated with the number of frames transmitted to STS-3/STM-1
by a Virtual Interface in the current 15-minute interval. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.4 |
|
virtualIfCurrentRxAbortFrames
The counter associated with the number of Received Aborted frames
encountered by a Virtual Interface in the current 15-minute interval. |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.5 |
|
virtualIfCurrentTxAbortFrames
The counter associated with the number of Transmitted Aborted frames
encountered by a Virtual Interface in the current 15-minute interval. |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.6 |
|
virtualIfCurrentMinLengthViolation
This counter is associated with the number of
Rx payload Min Length Violation frames encountered by a Virtual Interface in the current 15-minute interval. |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.7 |
|
virtualIfCurrentMaxLengthViolation
This counter is associated with the number of
Rx payload Max Length Violation frames encountered by a Virtual Interface in the current 15-minute interval. |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.8 |
|
virtualIfCurrentFcsError
The counter is associated with the number of
Frame Check Sequence errors encountered by a Virtual Interface in the current 15-minute interval. |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.9 |
|
virtualIfCurrentByteDestuffingViolation
The counter associated with the number of
Byte De-stuffing Violations encountered by a Virtual Interface in the current 15-minute interval. |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.10 |
|
virtualIfCurrentAdressMismatch
The counter associated with the number of
Adress Mismatch encountered by a Virtual Interface in the current 15-minute interval. |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.11 |
|
virtualIfCurrentControlMismatch
The counter associated with the number of
Control Mismatch encountered by a Virtual Interface in the current 15-minute interval. |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.12 |
|
virtualIfCurrentActiveVC
This object holds the number of active virtual containers (VCs)
of the Virtual Concatenation Group in the current 15-minute interval. |
Integer32 | .1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.13 |
virtualIfIntervalTable
table.1.3.6.1.4.1.164.3.1.6.2.1.6.2
·
1 row entry
·
14 columns
The Virtual Interface Interval table.
An entry in the Virtual Interface Interval table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
virtualIfIntervalNumber
A number between 1 and 96, which identifies the
interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is … |
Integer32 | .1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.1 |
|
virtualIfIntervalMinActiveVC
This object holds the minimum number of
active virtual containers (VCs) of the Virtual Concatenation Group, in a particular 15-minute interval in the past 24 hours. |
Integer32 | .1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.2 |
|
virtualIfIntervalMaxActiveVC
This object holds the maximum number of
active virtual containers (VCs) of the Virtual Concatenation Group, in a particular 15-minute interval in the past 24 hours. |
Integer32 | .1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.3 |
|
virtualIfIntervalRxFrames
This counter is associated with the number of
frames received from STS-3/STM-1 by a Virtual Interface in a particular 15-minute interval in the past 24 hours. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.4 |
|
virtualIfIntervalTxFrames
This counter is associated with the number of
frames transmitted to STS-3/STM-1 by a Virtual Interface in a particular 15-minute interval in the past 24 hours. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.5 |
|
virtualIfIntervalRxAbortFrames
This counter is associated with the number of
Received Abort frames encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours. |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.6 |
|
virtualIfIntervalTxAbortFrames
This counter is associated with the number of
Transmitted Abort frames encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours. |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.7 |
|
virtualIfIntervalMinLengthViolation
This counter is associated with the number of
Rx payload Min Length Violation frames encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours. |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.8 |
|
virtualIfIntervalMaxLengthViolation
This counter is associated with the number of
Rx payload Max Length Violation frames encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours. |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.9 |
|
virtualIfIntervalFcsError
This counter is associated with the number of
Frame Check Sequence errors encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours. |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.10 |
|
virtualIfIntervalByteDestuffingViolation
This counter is associated with the number of
Byte De-stuffing Violations encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours. |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.11 |
|
virtualIfIntervalAdressMismatch
This counter is associated with the number of
Address Mismatch encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours. |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.12 |
|
virtualIfIntervalControlMismatch
This counter is associated with the number of
Control mismatch encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours. |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.13 |
|
virtualIfIntervalBelowMinThreshold
This counter is associated with the number of
seconds that number of active VCs was below minimum threshold defined by vcGroupCnfgNoOfVCs, encountered by Virtual Interface in a particular 15-minute interval in the … |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.14 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.3
·
1 row entry
·
1 columns
The Virtual Interface LAPS Current table.
An entry in the Virtual Interface
LAPS Current table.
LAPS Current table.
Indexes
prtSonetGenCnfgIdx prtSonetGenIdx
| Column | Syntax | OID |
|---|---|---|
|
virtualIfLAPSCurrentSapiMismatch
This counter is associated with the number of
received SAPI field mismatch encountered by a Virtual Interface in the current 15-minute interval. |
PerfHist-TC-MIBPerfCurrentCount Constraints: range: 1-255Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.3.1.1 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.4
·
1 row entry
·
1 columns
The Virtual Interface LAPS table.
An entry in the Virtual Interface
LAPS Interval table.
LAPS Interval table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
virtualIfLAPSIntervalSapiMismatch
This counter is associated with the number of
received SAPI field mismatch encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours. |
PerfHist-TC-MIBPerfIntervalCount Enumerated Values:
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.4.1.1 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.5
·
1 row entry
·
6 columns
The Virtual Interface LAPF Current table.
An entry in the Virtual Interface
LAPF Current table.
LAPF Current table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
virtualIfLAPFCurrentNlpidMismatch
This counter is associated with the number of
received NLPID field mismatch encountered by a Virtual Interface in the current 15-minute interval. |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.5.1.1 |
||||||||||||||||||||||||||||||||
|
virtualIfLAPFCurrentOuiMismatch
This counter is associated with the number of
received OUI field mismatch encountered by a Virtual Interface in the current 15-minute interval. |
PerfHist-TC-MIBPerfCurrentCount Constraints: range: 1-255Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.5.1.2 |
||||||||||||||||||||||||||||||||
|
virtualIfLAPFCurrentPidMismatch
This counter is associated with the number of
received PID field mismatch encountered by a Virtual Interface in the current 15-minute interval. |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.5.1.3 |
||||||||||||||||||||||||||||||||
|
virtualIfLAPFCurrentDlciMismatch
This counter is associated with the number of
received DLCI field mismatch encountered by a Virtual Interface in the current 15-minute interval. |
PerfHist-TC-MIBPerfCurrentCount Enumerated Values:
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.5.1.4 |
||||||||||||||||||||||||||||||||
|
virtualIfLAPFCurrentMacRxFrames
This counter is associated with the number of
frames received from LAN by a Virtual Interface in the current 15-minute interval. |
PerfHist-TC-MIBPerfCurrentCount Enumerated Values:
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.5.1.5 |
||||||||||||||||||||||||||||||||
|
virtualIfLAPFCurrentMacTxFrames
This counter is associated with the number of
frames transmitted to LAN by a Virtual Interface in the current 15-minute interval. |
PerfHist-TC-MIBPerfCurrentCount Enumerated Values:
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.5.1.6 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.6
·
1 row entry
·
6 columns
The Virtual Interface LAPF Interval table.
An entry in the Virtual Interface Interval table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
virtualIfLAPFIntervalNlpidMismatch
This counter is associated with the number of
received NLPID field mismatch encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours. |
PerfHist-TC-MIBPerfIntervalCount Enumerated Values:
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.6.1.1 |
||||||||
|
virtualIfLAPFIntervalOuiMismatch
This counter is associated with the number of
received OUI field mismatch encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours. |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.6.1.2 |
||||||||
|
virtualIfLAPFIntervalPidMismatch
This counter is associated with the number of
received PID field mismatch encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours. |
PerfHist-TC-MIBPerfIntervalCount Enumerated Values:
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.6.1.3 |
||||||||
|
virtualIfLAPFIntervalDlciMismatch
This counter is associated with the number of
received DLCI field mismatch by a Virtual Interface in a particular 15-minute interval in the past 24 hours. |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.6.1.4 |
||||||||
|
virtualIfLAPFIntervalMacRxFrames
This counter is associated with the number of
frames received from LAN by a Virtual Interface in a particular 15-minute interval in the past 24 hours. |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.6.1.5 |
||||||||
|
virtualIfLAPFIntervalMacTxFrames
This counter is associated with the number of
frames transmitted to LAN encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours. |
PerfHist-TC-MIBPerfIntervalCount Enumerated Values:
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.6.1.6 |
virtualIfGFPCurrentTable
table.1.3.6.1.4.1.164.3.1.6.2.1.6.7
·
1 row entry
·
10 columns
The Virtual Interface GFP Current table.
An entry in the Virtual Interface
GFP Current table.
GFP Current table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
virtualIfGFPCurrentIdleFrameError
This counter is associated with the number of
received GFP IDLE frames that are detected to be in error, encountered by a Virtual Interface in the current 15-minute interval. |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.1 |
||||||
|
virtualIfGFPCurrentCHecSbError
This counter is associated with the number of
received GFP frames that are detected to have single-bit errors in the Core header (i.e. cHEC field) only, encountered by a Virtual Interface in the current 15-minute in… |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.2 |
||||||
|
virtualIfGFPCurrentPtiMismatch
This counter is associated with the number of
rreceived GFP frames that are detected with a mismatch on the PTI field (i.e. value of PTI is not equal to Client Data or Management frame), encountered by a Virtual Inte… |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.3 |
||||||
|
virtualIfGFPCurrentExiMismatch
This counter is associated with the number of
received GFP frames that are detected with a mismatch on the EXI field (i.e. value of EXI is not equal to NULL or LINEAR modes), encountered by a Virtual Interface in t… |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.4 |
||||||
|
virtualIfGFPCurrentUpiMismatch
This counter is associated with the number of
received GFP frames that are detected with a mismatch on the UPI field (i.e. value of EXI is not equal to 00000001), encountered by a Virtual Interface in th… |
PerfHist-TC-MIBPerfCurrentCount Constraints: range: 1-255Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.5 |
||||||
|
virtualIfGFPCurrentTHecSbError
This counter is associated with the number of
received GFP frames that are detected to only have single-bit errors in the Type header (i.e. tHEC field), encountered by a Virtual Interface in the current 15-minute int… |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.6 |
||||||
|
virtualIfGFPCurrentTHecMbError
This counter is associated with the number of
received GFP frames that are detected to only have multi-bit errors in the Type header (i.e. tHEC field), encountered by a Virtual Interface in the current 15-mi… |
PerfHist-TC-MIBPerfCurrentCount Enumerated Values:
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.7 |
||||||
|
virtualIfGFPCurrentCidMismatch
This counter is associated with the number of
received GFP frames that are detected to have a mismatch/unsupported value in the CID field only, encountered by a Virtual Interface in the current 15-minute interval. |
PerfHist-TC-MIBPerfCurrentCount Enumerated Values:
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.8 |
||||||
|
virtualIfGFPCurrentEHecSbError
This counter is associated with the number of
received GFP frames that are detected to only have single-bit errors in the Extension header (i.e. eHEC field), encountered by a Virtual Interface in the current 15-min… |
PerfHist-TC-MIBPerfCurrentCount Constraints: range: 0-62Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.9 |
||||||
|
virtualIfGFPCurrentEHecMbError
This counter is associated with the number of
received GFP frames that are detected to only have single-bit errors in the Extension header (i.e. eHEC field), encountered by a Virtual Interface in the current 15-minu… |
PerfHist-TC-MIBPerfCurrentCount Enumerated Values:
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.10 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.8
·
1 row entry
·
10 columns
The Virtual Interface GFP Interval table.
An entry in the Virtual Interface
GFP Interval table.
GFP Interval table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
virtualIfGFPIntervalIdleFrameError
This counter is associated with the number of
received GFP IDLE frames that are detected to be in error, encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours. |
PerfHist-TC-MIBPerfIntervalCount Enumerated Values:
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.1 |
||||||||||
|
virtualIfGFPIntervalCHecSbError
This counter is associated with the number of
received GFP frames that are detected to have single-bit errors in the Core header (i.e. cHEC field) only, encountered by a Virtual Interface in a particular 15-minute int… |
PerfHist-TC-MIBPerfIntervalCount Enumerated Values:
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.2 |
||||||||||
|
virtualIfGFPIntervalPtiMismatch
This counter is associated with the number of
rreceived GFP frames that are detected with a mismatch on the PTI field (i.e. value of PTI is not equal to Client Data or Management frame), encountered by a Virtual Inter… |
PerfHist-TC-MIBPerfIntervalCount Enumerated Values:
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.3 |
||||||||||
|
virtualIfGFPIntervalExiMismatch
This counter is associated with the number of
received GFP frames that are detected with a mismatch on the EXI field (i.e. value of EXI is not equal to NULL or LINEAR modes), encountered by a Virtual Inter… |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.4 |
||||||||||
|
virtualIfGFPIntervalUpiMismatch
This counter is associated with the number of
received GFP frames that are detected with a mismatch on the UPI field (i.e. value of EXI is not equal to 00000001), encountered by a Virtual Interface in a particular 15… |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.5 |
||||||||||
|
virtualIfGFPIntervalTHecSbError
This counter is associated with the number of
received GFP frames that are detected to only have single-bit errors in the Type header (i.e. tHEC field), encountered by a Virtual Interface in a particular 15-minute inte… |
PerfHist-TC-MIBPerfIntervalCount Constraints: range: 1-255Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.6 |
||||||||||
|
virtualIfGFPIntervalTHecMbError
This counter is associated withthe number of
received GFP frames that are detected to only have multi-bit errors in the Type header (i.e. tHEC field), encountered by a Virtual Interface in a particular 15-minute interv… |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.7 |
||||||||||
|
virtualIfGFPIntervalCidMismatch
This counter is associated with the number of
received GFP frames that are detected to have a mismatch/unsupported value in the CID field only, encountered by a Virtual Interface in a particular 15-minute interval in … |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.8 |
||||||||||
|
virtualIfGFPIntervalEHecSbError
This counter is associated with the number of
received GFP frames that are detected to only have single-bit errors in the Extension header (i.e. eHEC field), encountered by a Virtual Interface in a particula… |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.9 |
||||||||||
|
virtualIfGFPIntervalEHecMbError
This counter is associated with the the number of
received GFP frames that are detected to only have multi-bit errors in the Extension header (i.e. eHEC field), encountered by a Virtual Interface in a particular 15-mi… |
PerfHist-TC-MIBPerfIntervalCount Enumerated Values:
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.10 |
prtSonetGenTable
table.1.3.6.1.4.1.164.3.1.6.2.2.1.1
·
1 row entry
·
5 columns
Sonet/SDH general port configuration table.
An entry in the Sonet/SDH general port configuration table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
prtSonetGenCnfgIdx
This object indicates the Idx of the Config being accessed.
Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurations, Set can be performed only to the Temporary Config (=255… |
Integer32 | .1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.1 |
|
prtSonetGenIdx
This object indicates a unique port or interface number.
For numbering, see product's spec. For some products, the numbering can equal ifIndex. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.2 |
|
prtSonetGenSdThreshold
SD=Signal Degraded Threshold. Units: [10E-].
The threshold is 10E-x relative to the frequency of the data flow. x=3, 4, 5, 6, 7, 8, 9. n3= 10E-3 n4= 10E-4 n5= 10E-5 n6= 10E-6 n7= 10E-7 n8= 10E-8 n9= 10E-9 . |
Enumerationr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.3 |
|
prtSonetGenEedThreshold
EED=Excessive Error Defect Threshold. Units: [10E-].
The threshold is 10E-x relative to the frequency of the data flow. x=3, 4, 5, 6, 7, 8, 9. n3= 10E-3 n4= 10E-4 n5= 10E-5 n6= 10E-6 n7= 10E-7 n8= 10E-8 n9= 10E-9 . |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.4 |
|
prtSonetGenBerEnable
Controls the activation of the Line Ber (Bit Error Rate), means whether
SD and EED threshold parameters will be enabled. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.5 |
prtSonetStm1Table
table.1.3.6.1.4.1.164.3.1.6.2.2.2.1
·
1 row entry
·
17 columns
Sonet/SDH STM-1 port configuration table.
An entry in the Sonet/SDH STM-1 port configuration table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
prtSonetStm1CnfgIdx
This object indicates the Idx of the Config being accessed.
Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurations, Set can be performed only to the Temporary Config (=255… |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.1 |
||||||||
|
prtSonetStm1Idx
This object indicates a unique port or interface number.
For numbering, see product's spec. For some products, the numbering can equal ifIndex. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.2 |
||||||||
|
prtSonetStm1ClockSrc
Clock Source of the STM-1 port.
lbt = Loop Back Timing. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.3 |
||||||||
|
prtSonetStm1DccMode
DCC Mode. DCC=Data Communication Channel.
d1ToD3 = D1-D3 bytes are used (RS=Regeneration Section). d4ToD12= D4-D12 bytes are used (MS=Multiplexing Section). d1.... d12 enable user to select single DCC byte |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.4 |
||||||||
|
prtSonetStm1RoutingProt
Routing Protocol.
|
Enumerationr/w Constraints: range: 0-255 |
.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.5 |
||||||||
|
prtSonetStm1MngProt
Management Protocol over DCC: Proprietary, PPP, Frame Relay,
HDLC or LAPD over HDLC . ppp = according to STD-51 ( rfc1661/1662) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.6 |
||||||||
|
prtSonetStm1OperationalMode
Operational Mode.
linear - cannot be selected when there is Redundancy between the STM-1 ports. |
Enumerationr/w Constraints: range: 1-1 |
.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.7 |
||||||||
|
prtSonetStm1VoiceChannel
This parameter enable user to select whether
voice channel will be transferred using E1 byte, E2 Byte, or not at all. |
Enumerationr/w Constraints: range: 0-83 |
.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.8 |
||||||||
|
prtSonetStm1OutputRate
This parameter indicates the output rate in cells/sec, which is
supported per port. |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.9 |
||||||||
|
prtSonetStm1S1ProtocolClock
This parameter allows user to select whether to enable use of
Remote Side Clock according to the Protocol passed on S1 Bit. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.10 |
||||||||
|
prtSonetStm1GatewayRingSubnetAddress
This parameter defines subnet for static routing,
together with prtSonetStm1GatewayRingSubnetMask |
RFC1155-SMIIpAddressr/w Enumerated Values:
Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.11 |
||||||||
|
prtSonetStm1GatewayRingSubnetMask
This parameter defines subnet for static routing,
together with prtSonetStm1GatewayRingSubnetAddress |
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.12 |
||||||||
|
prtSonetStm1MngProtDeviationType
This parameter is used in conjunction with prtSonetStm1MngProt
to define management protocol used & type of deviation (if exist) from standard. Standard = no deviation from standard protocol Type1 = PPP without se… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.13 |
||||||||
|
prtSonetStm1MngSameIpAsHost
This parameter indicates whether IP address
used for management is same as the device IP address |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.14 |
||||||||
|
prtSonetStm1MngIpAddress
This parameter defines IP address for DCC management
for this link, together with prtSonetStm1MngIpSubnetMask. This parameter is applicable only if prtSonetStm1MngSameIpAsHost=no. |
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.15 |
||||||||
|
prtSonetStm1MngIpSubnetMask
This parameter defines IP subnet mask for DCC management
for this link, together with prtSonetStm1MngIpAddress This parameter is applicable only if prtSonetStm1MngSameIp=no |
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.16 |
||||||||
|
prtSonetStm1MngDefaultGateway
This parameter defines default Gateway address for DCC management
for this link. This parameter is applicable only if prtSonetStm1MngSameIp=no |
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.17 |
prtSonetVcTable
table.1.3.6.1.4.1.164.3.1.6.2.2.3.1
·
1 row entry
·
11 columns
Sonet/SDH VC port configuration table.
An entry in the Sonet/SDH VC port configuration table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
prtSonetVcCnfgIdx
This object indicates the Idx of the Config being accessed.
Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurations, Set can be performed only to the Temporary Config (=255… |
Integer32 | .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.1 |
||||||
|
prtSonetVcIdx
This object indicates a unique port or interface number.
For numbering, see product's spec. For some products, the numbering can equal ifIndex. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.2 |
||||||
|
prtSonetVcJTxPathTraceEnable
Enable/Disable Transmitting Jy Path Trace. y=1, 2:
J1 - for VC-4 layer J2 - for VC-12 layer. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.3 |
||||||
|
prtSonetVcJRxPathTraceEnable
Enable/Disable checking Jy Path Trace. y=1, 2:
J1 - for VC-4 layer J2 - for VC-12 layer. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.4 |
||||||
|
prtSonetVcJPathTrace
Jy Path Trace. y=1, 2:
J1 - for VC-4 layer J2 - for VC-12 layer. This object is applicable only if one of the previous 2 objects is 'enable'. |
OctetStringr/w | .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.5 |
||||||
|
prtSonetVcConnect
Connect VCn (n - 11,12,2,3,4) port (yes/no).
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.6 |
||||||
|
prtSonetVcSignalLabel
Signal Label.
For VC-3: The SONET standard defines the C2 byte as the path signal label. The purpose of this byte is to communicate the payload type being encapsulated by the SONET Framing OverHead. It allows a single… |
OctetStringr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.7 |
||||||
|
prtSonetVcPathTracePadding
Padding character will pad prtSonetVcJPathTrace string
to fill required number of characters. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.8 |
||||||
|
prtSonetVcPayloadBlockOnPathTrace
Block payload on this VC upon PathTrace (TIM).
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.9 |
||||||
|
prtSonetVcPayloadType
Payload type, applicable for STS-1/TUG-3 layer.
vc1x = vc12 or vc11 for SDH, VT1.5, VT2 for SONET. clear channel - complete TUG-3 or STS-1 For Egate-100: POS (Packets over Sonet) configuration is valid per STM1/OC3… |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.10 |
||||||
|
prtSonetVcPathTraceSize
Path Trace Size in Bytes - 16 or 64.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.11 |
prtSonetTuTable
table.1.3.6.1.4.1.164.3.1.6.2.2.3.2
·
1 row entry
·
7 columns
The write operation into the Table's Objects is valid only for the TmpCnfg entry (Scratch).
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtSonetTuCnfgIdx
This object indicates the Idx of the Config being accessed.
Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurations, Set can be performed only to the Temporary Config (=255… |
Integer32 | .1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.1 |
||||||||||||||||||||
|
prtSonetTuPrtIdx
This object indicates a unique port or interface number.
For port numbering, see product's spec. For some products, the numbering can equal ifIndex. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.2 |
||||||||||||||||||||
|
prtSonetTuIdx
This object indicates a unique TU (Tributary Unit) within VC-4.
The valid TUs are 1..63. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.3 |
||||||||||||||||||||
|
prtSonetTuConPrtIdx
This object indicates the connected port, when prtSonetTuType=connect.
For port numbering, see product's spec. For some products, the numbering can equal ifIndex. notApplicable - will be indicated as 100. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.4 |
||||||||||||||||||||
|
prtSonetTuType
The type of TU (Tributary Unit).
connect - connected to one of the E1 ports. bypass - bypassed to the other VC4 port. TUs that are not connected or bypassed, will not exist in this table. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.5 |
||||||||||||||||||||
|
prtSonetTuMode
TU Mode of connection.
addAndDrop - Add & Drop add - Add (TU receives from the E1 ports). |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.6 |
||||||||||||||||||||
|
prtSonetTuRowStatus
Creation/Deletion of rows in the table.
|
SNMPv2-TCRowStatusr/w Enumerated Values:
Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.7 |
vcGroupCnfgTable
table.1.3.6.1.4.1.164.3.1.6.2.2.4.1
·
1 row entry
·
20 columns
The Virtual Concatenation Group configuration table.
An entry in the Virtual Concatenation Group
configuration table.
configuration table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
vcGroupCnfgIdx
This object indicates the Idx of the Config being accessed.
Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurations, Set can be performed only to the Temporary Config (=255… |
Integer32 | .1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.1 |
||||||||||||||
|
vcGroupCnfgNumber
Virtual Concatenation Group Number.
For FCD-155 up to eight groups are defined valid values are 1..8. For MP-4100, group ifIndex is used. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.2 |
||||||||||||||
|
vcGroupCnfgRowStatus
Creation/Deletion of rows in the table.
|
SNMPv2-TCRowStatusr/w Constraints: range: 0-62Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.3 |
||||||||||||||
|
vcGroupCnfgVcType
User may select type of SDH Virtual Containers (VC)
(SONET Virtual Tributaries VT ) to be concatenated in this Virtual Concatenation Group. For SDH, values 2,3,4 and 8 are valid. For SONET, values 5, 6,7 are valid. |
Enumerationr/w Constraints: range: 1-1 |
.1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.4 |
||||||||||||||
|
vcGroupCnfgNoOfVCs
User may select number of Virtual Containers (VC)
(SONET Virtual Tributaries VT ) to be concatenated in this Virtual Concatenation Group. Valid range for this number depends on type VC selected by vcGroupCnfgVCType F… |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.5 |
||||||||||||||
|
vcGroupCnfgLCAS
This object controls Link Capacity Adjustment
Scheme (LCAS) activation. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.6 |
||||||||||||||
|
vcGroupCnfgEncapsulation
This object enables user to select encapsulation method.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.7 |
||||||||||||||
|
vcGroupCnfgGroupIfIndex
The ifIndex assigend to this group.
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.8 |
||||||||||||||
|
vcGroupCnfgRip2
This object controls RIP 2.
User may select to send RIP 2 message over selected group or not |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.9 |
||||||||||||||
|
vcGroupCnfgGfpChId
Generic Framing Procedure (GFP) Channel ID,
Valid only when vcGroupCnfgEncapsulation = gfp (4) Valid values are 0x00 - oxFF (hex) |
Integer32r/w | .1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.10 |
||||||||||||||
|
vcGroupCnfgK4
This object controls whether K4 byte
(of Line Overhead) is used as an indication for virtual concatenation (VCAT). This object is applicable, when VCG includes only a single Virtual Container (VC) (or SONET VT) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.11 |
||||||||||||||
|
vcGroupCnfgExSignalLabel
Extended Signal Label.
Relevant only when vcGroupCnfgK4 = yes(3). Agents that do not support this feature will send SIZE 0. |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.12 |
||||||||||||||
|
vcGroupCnfgLcasMinNoOfVCs
Minimum number of VC's to declare alarm, in LCAS mode.
Applicable only when LCAS is active (vcGroupCnfgLCAS =lcasActive) 1...63 for SDH, 1...84 for SONET 0= not applicable. |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.13 |
||||||||||||||
|
vcGroupCnfgLcasStatus
This object summarize LCAS states of all VCs in VCG:
belowMinNoOfVCs - Number of VCs in Norm state is less than the minimum number of VCs (indicated by vcGroupCnfg… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.14 |
||||||||||||||
|
vcGroupCnfgMappingMode
This object define Path Protection mode for VCG.
Auto - the entire mapping for Virtual Concatenation Group x is copied automatically by agent for the protection group to same TUs on the other SONET/SDH link which re… |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.15 |
||||||||||||||
|
vcGroupCnfgTrafficType
This object allows to select traffic type for
specific VCG. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.16 |
||||||||||||||
|
vcGroupCnfgGroupName
Virtual Concatenation Group (VCG) Name.
String length is limited to 15 characters. |
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.17 |
||||||||||||||
|
vcGroupCnfgLoopDetection
VCAT Loop detecetion enabled.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.18 |
||||||||||||||
|
vcGroupCnfgLcasWaitToRestore
Time duration (in milliseconds units) waited after
errors on channel stopped, before channel is reused. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.19 |
||||||||||||||
|
vcGroupCnfgLcasHoldOff
Time duration (in milliseconds units) in which errors on channel
are disregarded. (Threshold) |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.20 |
vcgGfpMuxCnfgTable
table.1.3.6.1.4.1.164.3.1.6.2.2.4.2
·
1 row entry
·
6 columns
The Virtual Concatenation Group GFP Mux configuration table.
An entry in the Virtual Concatenation Group GFP Mux
configuration table.
configuration table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
vcgGfpMuxCnfgIdx
This object indicates the Index of the configuration being accessed.
Index of 255 relates to the Temporary (Scratch) coninguration. For products that support several configurations, Set can be performed only to the Temp… |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.2.2.4.2.1.1 |
||||||||||||
|
vcgGfpMuxCnfgMuxNumber
Virtual Concatenation Group GFP Mux Number.
Refer to device specification for definition of - maximum number of GFP-mux. - concatenation of Slot and GFP mux number. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.2.2.4.2.1.2 |
||||||||||||
|
vcgGfpMuxCnfgRowStatus
Creation/Deletion of rows in the table.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.3.1.6.2.2.4.2.1.3 |
||||||||||||
|
vcgGfpMuxCnfgMuxName
Virtual Concatenation Group, GFP Mux name.
|
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Enumerated Values:
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.1.6.2.2.4.2.1.4 |
||||||||||||
|
vcgGfpMuxCnfgPrimeGroup
Index of Virtual Concatenation Group used as
Primary for the GFP mux created for FCD 155 up to 8 Virtual Concatenation Group are defined: 1 -> Virtual Concatenation Group 1 2 -> Virtual Concatenation Group 2 3 -> V… |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.2.2.4.2.1.5 |
||||||||||||
|
vcgGfpMuxCnfgGrpBwAlloc
This object indicates the allocated bandwidth (BW) to each
Virtual Concatenation Group (VCG). Each nibble indicates BW percentage, in 12.5% steps, assigned to a group. For FCD-155, there may be 4 or 8… |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.2.2.4.2.1.6 |
virtualIfGenTable
table.1.3.6.1.4.1.164.3.1.6.2.2.5.1
·
1 row entry
·
3 columns
Sonet/SDH general port configuration table.
An entry in the Sonet/SDH general port configuration table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
virtualIfGenCnfgIdx
This object indicates the Idx of the Config being accessed.
Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurations, Set can be performed only to the Temporary Config (=255… |
Integer32 | .1.3.6.1.4.1.164.3.1.6.2.2.5.1.1.1 |
|
virtualIfGenIdx
This object indicates a unique port or interface number.
For numbering, see product's spec. For some products, the numbering can equal ifIndex. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.2.2.5.1.1.2 |
|
virtualIfGenFrameFormat
The frame format.
fcsEnabe = Frame will be sent with the FCS bits. fcsDisable = Frame will be sent without the FCS bits . |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.2.2.5.1.1.3 |
prtSonetXConnectTable
table.1.3.6.1.4.1.164.3.1.6.2.3.1
·
1 row entry
·
11 columns
The write operation into the Table's Objects is valid only for the TmpCnfg entry (Scratch).
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtSonetXConnectCnfgIdx
This object indicates the Idx of the Config being accessed.
Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurations, Set can be performed only to the Temporary Config (=255… |
Integer32 | .1.3.6.1.4.1.164.3.1.6.2.3.1.1.1 |
||||||||||||
|
prtSonetXConnectPrtIdx
This object indicates a unique port or interface number.
For port numbering, see product's spec. For some products, the numbering can equal ifIndex. |
SNMPv2-SMIInteger32 Constraints: range: 0-899Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.2.3.1.1.2 |
||||||||||||
|
prtSonetXConnectConPrtIdx
This object indicates the connected port.
For port numbering, see product's spec. For some products, the numbering can equal ifIndex. notApplicable - will be indicated as 255. |
SNMPv2-SMIInteger32 Constraints: range: 0-96Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.2.3.1.1.3 |
||||||||||||
|
prtSonetXConnectAUGIdx
This object indicates an AUG (Administrative Unit Group) within STM-N.
The valid AUGs values are: 1 for STM-1 1...4 for STM-4, 1..16 for STM-16 and 1..64 for STM-64 (STM-64) 255 designates NA. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.2.3.1.1.4 |
||||||||||||
|
prtSonetXConnectTUG3Idx
This object indicates a TUG-3 (Tributary Unit Group 3) within VC-4.
The valid TUG3s are values are 1..3. and 255 which designates NA |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.2.3.1.1.5 |
||||||||||||
|
prtSonetXConnectTUG2Idx
This object indicates a TUG2 (Tributary Unit Group 2 ) within VC-3.
The valid TUG2's values are 1..7 and 255 which designates NA |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.2.3.1.1.6 |
||||||||||||
|
prtSonetXConnectTUnIdx
This object indicates a TUn within TUG-2 or TUG-3
(Tributary Unit n, where n is 2, 12 or 11 within TUG-2, or 3 within TUG-3) valid values are 1 for TU-2 1 for TU-3 1..4 for TU-11 1..3 for TU-12 … |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.2.3.1.1.7 |
||||||||||||
|
prtSonetXConnectRowStatus
Creation/Deletion of rows in the table.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.3.1.6.2.3.1.1.8 |
||||||||||||
|
prtSonetXConnectDirection
TU direction of connection.
rx=Drop tx=Add both = Add & Drop |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.2.3.1.1.9 |
||||||||||||
|
prtSonetXConnectTuNumber
This object indicates which TU is used in prtSonetXConnectTUnIdx
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.2.3.1.1.10 |
||||||||||||
|
prtSonetXConnectMode
TU Mode of connection.
addAndDrop - Add & Drop bypass - bypassed to the other VC4 port. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.2.3.1.1.11 |
prtSonetVcStatTable
table.1.3.6.1.4.1.164.3.1.6.2.4.1
·
1 row entry
·
14 columns
VC Status Table
An entry in the VC status Table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
prtSonetVcRxJPathTrace
Jy Path Trace value received from network.
y=1, 2: J1 - for VC-4 layer J2 - for VC-12 layer. |
OctetString | .1.3.6.1.4.1.164.3.1.6.2.4.1.1.1 |
|
prtSonetVcRxSignalLabel
Signal Label received from network.
For VC-3: The SONET standard defines the C2 byte as the path signal label. The purpose of this byte is to communicate the payload type being encapsulated by the SONET Framing OverHe… |
OctetString | .1.3.6.1.4.1.164.3.1.6.2.4.1.1.2 |
|
prtSonetVcLcasSourceState
Fixed - This is an indication that this end
uses fixed bandwidth (non-LCAS mode) Add - This member is about to be added to the group Norm - Normal transmission. EOS - E… |
Enumeration | .1.3.6.1.4.1.164.3.1.6.2.4.1.1.3 |
|
prtSonetVcLcasSinkState
Fixed - This is an indication that this end
uses fixed bandwidth (non-LCAS mode) Add - This member is about to be added to the group Norm - Normal transmission. EOS - E… |
Enumeration | .1.3.6.1.4.1.164.3.1.6.2.4.1.1.4 |
|
prtSonetVcStatus
This variable indicates the Status of the interface.
It contains failure state information. The variable is a bit map represented as a sum, therefore, it can represent multiple failures simultaneously. The sonetVC… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.2.4.1.1.5 |
|
prtSonetVcRxSeqNumber
This variable indeticates the LCAS Rx
sequence number of this VC. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.4.1.1.6 |
|
prtSonetVcTxSeqNumber
This variable indicates the LCAS Tx sequence number of this VC.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.4.1.1.7 |
|
prtSonetVcMfiDiffDelay
This variable indicates time difference (based on MFI field) from the
fastest channel (on which it will be 0), in miliSeconds units |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.4.1.1.8 |
|
prtSonetVcLoMF
This variable indicates loss of Multiframe defect.
|
Enumeration | .1.3.6.1.4.1.164.3.1.6.2.4.1.1.9 |
|
prtSonetVcLoopStatus
This variable indicates Loop Status.
|
Enumeration | .1.3.6.1.4.1.164.3.1.6.2.4.1.1.10 |
|
prtSonetVcLcasTxStateMachineStatus
LCAS State machine status.
|
Enumeration Constraints: range: 4-4 |
.1.3.6.1.4.1.164.3.1.6.2.4.1.1.11 |
|
prtSonetVcLcasRxStateMachineStatus
LCAS State machine status.
|
Enumeration | .1.3.6.1.4.1.164.3.1.6.2.4.1.1.12 |
|
prtSonetVcMFLengthErrorCounter
Counts the multi-frames that had wrong length (shorter or longer)
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.4.1.1.13 |
|
prtSonetVcCntrlPktCRCErrorCounter
Counts Number of Control Packet CRC errors
|
SNMPv2-SMICounter32 Constraints: range: 1-96Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.4.1.1.14 |
prtSonetPathProtTable
table.1.3.6.1.4.1.164.3.1.6.2.4.2
·
1 row entry
·
5 columns
Path Protection Monitoring Table
An entry in the Path Protection monitoring Table.
This table indicates for each protected interface
which VCs are mapped as Working VC,
which VCs are mapped as Protection VC,
and which of them are currently active.
This table indicates for each protected interface
which VCs are mapped as Working VC,
which VCs are mapped as Protection VC,
and which of them are currently active.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
prtSonetPathProtProtectedInterface
Interface protected by path-protection,
e.g. PDH (E1/T1/E3/T3) port, VCG (Virtual Concatenation Group). |
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.164.3.1.6.2.4.2.1.1 |
|
prtSonetPathProtIdx
Runing index of entries which are mapped
to a specific interface, indicated by PrtSonetPathProtProtectedInterface. e.g - multiple working VCs and protection VCs are mapped to single Virtual Concatenation Group … |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.4.2.1.2 |
|
prtSonetPathProtWorkingVc
A VC mapped to interface indicated by
prtSonetPathProtProtectedInterface as working VC. The value of this object may be equal to the value of ifIndex of working VC |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.4.2.1.3 |
|
prtSonetPathProtProtectionVc
A VC mapped to interface indicated by
prtSonetPathProtProtectedInterface as protection VC. The value of this object may be equal to the value of ifIndex of protection VC |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.2.4.2.1.4 |
|
prtSonetPathProtActiveVc
This object indicates which of the path protection
VCs is currently active. |
Enumeration | .1.3.6.1.4.1.164.3.1.6.2.4.2.1.5 |
radApsConfigTable
table.1.3.6.1.4.1.164.3.1.6.2.5.1
·
1 row entry
·
3 columns
An Augment to the APS Configuration Table (apsConfigTable in APS-MIB).
An entry in the table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
radApsConfigClearCounters
Setting this object to on(3) will clear APS Counters.
Upon performing this operation, the value will be automatically changed to off(2). |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.2.5.1.1.1 |
|
radApsConfigCommandAndStatus
noOp - initial state only (cannot be Set by user).
clear - clearing the last performed command. Can be Set only if previous state was other than noOp or clear. forcedSwitch - tra… |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.2.5.1.1.2 |
|
radApsConfigFlipOnSD
Flip active channel according to SD (Signal Degradation).
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.2.5.1.1.3 |
radApsStatusTable
table.1.3.6.1.4.1.164.3.1.6.2.5.2
·
1 row entry
·
1 columns
An Augment to the APS Status Table (apsStatusTable in APS-MIB).
An entry in the table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
radApsStatusCurrentWorkingChannel
This object indicates the port/interface index of
the Current Working Channel. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.2.5.2.1.1 |
vcGroupStatTable
table.1.3.6.1.4.1.164.3.1.6.2.6.1
·
1 row entry
·
1 columns
Sonet/SDH VCG status table.
An entry in the Sonet/SDH VCG gen staus table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
vcGroupStatRemoteChannelStatus
Status of remote VCG channels as received in the local station,
represented by 1 bit per channel. Refer to product spec for details. |
OctetString | .1.3.6.1.4.1.164.3.1.6.2.6.1.1.1 |
prtSDs3IfTable
table.1.3.6.1.4.1.164.3.1.6.3.1.1
·
1 row entry
·
2 columns
The DS3 interface table.
An entry in the DS3 interface table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
prtDs3IfTimeElapsed
The number of seconds that have elapsed since
the beginning of the near end current error- measurement period. |
Integer32 | .1.3.6.1.4.1.164.3.1.6.3.1.1.1.1 |
|
prtDs3IfValidIntervals
The number of previous near end intervals for
which valid data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complet… |
Integer32 | .1.3.6.1.4.1.164.3.1.6.3.1.1.1.2 |
prtDs3CurrentTable
table.1.3.6.1.4.1.164.3.1.6.3.1.2
·
1 row entry
·
19 columns
The DS3 Current table.
An entry in the DS3 Current table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
prtDs3CurrentLOS
The counter associated with the number of LOS
seconds, encountered by a DS3 interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.3.1.2.1.1 |
||||||||
|
prtDs3CurrentOOF
The counter associated with the number of OOF
seconds, encountered by a DS3 interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.3.1.2.1.2 |
||||||||
|
prtDs3CurrentLOC
The counter associated with the number of LOC
seconds, encountered by a DS3 interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.3.1.2.1.3 |
||||||||
|
prtDs3CurrentAIS
The counter associated with the number of AIS
seconds, encountered by a DS3 interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.3.1.2.1.4 |
||||||||
|
prtDs3CurrentRDI
The counter associated with the number of RDI
seconds, encountered by a DS3 interface. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.3.1.2.1.5 |
||||||||
|
prtDs3CurrentUAS
The counter associated with the number of UAS,
encountered by a SONET interface. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.3.1.2.1.6 |
||||||||
|
prtDs3CurrentBIP
The counter associated with the number of
BIP errors, encountered by a DS3 interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.3.1.2.1.7 |
||||||||
|
prtDs3CurrentFEBE
The counter associated with the number of
FEBE errors, encountered by a DS3 interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.3.1.2.1.8 |
||||||||
|
prtDs3CurrentSLM
The counter associated with the number of SLM
seconds, encountered by an E3 (only ) interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.3.1.2.1.9 |
||||||||
|
prtDs3CurrentSES
The counter associated with the number of SES
encountered by a E3 interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.3.1.2.1.10 |
||||||||
|
prtDs3CurrentES
The number of Errored Seconds, encountered by a
DS3 interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.3.1.2.1.11 |
||||||||
|
prtDs3CurrentBitParity
Bit Parity Error counter. Relevant to T3 only.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.3.1.2.1.12 |
||||||||
|
prtDs3CurrentPlcpLOF
The counter associated with the number of LOF
seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals. This counter is relevant for plcpInternal(5) or plcpExternal(6) configur… |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.3.1.2.1.13 |
||||||||
|
prtDs3CurrentPlcpRAI
Receiving Yellow/Remote Alarm Indication. This counter is
relevant for PLCP (external/internal) frame types only. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.3.1.2.1.14 |
||||||||
|
prtDs3CurrentPlcpBIP
The counter associated with the number of BIP errors,
encountered by a DS3 interface in the current 15 minute interval. This counter is relevant for PLCP (external/internal) frame types only. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.3.1.2.1.15 |
||||||||
|
prtDs3CurrentPlcpFEBE
The counter associated with the number of FEBE
errors, encountered by a DS3 interface in the current 15 minute interval. This counter is relevant for PLCP (external/internal) frame types only. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.3.1.2.1.16 |
||||||||
|
prtDs3CurrentBPV
Number of BPVs (Bi-Polar Violations) , encountered by a
DS3 interface in the current 15 minute interval. This object is relevant only for Electrical Line of Fomi-E3/T3. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.3.1.2.1.17 |
||||||||
|
prtDs3CurrentLCE
Number of LCE (Link Code Errors) encountered
by a DS3 interface in the current 15 minute interval. This object is relevant only for Optical Links of Fomi-E3/T3. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.3.1.2.1.18 |
||||||||
|
prtDs3CurrentStatus
The statuses of the current interval:
0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was partialy out. 4 - notValid - module is out. |
OctetString | .1.3.6.1.4.1.164.3.1.6.3.1.2.1.19 |
prtDs3IntervalTable
table.1.3.6.1.4.1.164.3.1.6.3.1.3
·
1 row entry
·
20 columns
The DS3 Interval table.
An entry in the DS3 Interval table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
prtDs3IntervalNumber
A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid). |
Integer32 | .1.3.6.1.4.1.164.3.1.6.3.1.3.1.1 |
|
prtDs3IntervalLOS
The counter associated with the number of LOS
seconds , encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.3.1.3.1.2 |
|
prtDs3IntervalOOF
The counter associated with the number of OOF
seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.3.1.3.1.3 |
|
prtDs3IntervalLOC
The counter associated with the number of LOC
seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.3.1.3.1.4 |
|
prtDs3IntervalAIS
The counter associated with the number of AIS
seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.3.1.3.1.5 |
|
prtDs3IntervalRDI
The counter associated with the number of RDI
seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.3.1.3.1.6 |
|
prtDs3IntervalUAS
The counter associated with the number of UAS,
encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.3.1.3.1.7 |
|
prtDs3IntervalBIP
The counter associated with the number of
BIP errors, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.3.1.3.1.8 |
|
prtDs3IntervalFEBE
The counter associated with the number of
FEBE errors, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.3.1.3.1.9 |
|
prtDs3IntervalSLM
The counter associated with the number of SLM
seconds, encountered by an E3 interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.3.1.3.1.10 |
|
prtDs3IntervalSES
The counter associated with the number of SES
encountered by a E3 interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.3.1.3.1.11 |
|
prtDs3IntervalES
The number of Errored Seconds, encountered by a
DS3 interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.3.1.3.1.12 |
|
prtDs3IntervalBitParity
Bit Parity Error counter. Relevant to T3 only.
|
SNMPv2-SMIGauge32 Constraints: range: 4-4Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.3.1.3.1.13 |
|
prtDs3IntervalPlcpLOF
The counter associated with the number of LOF
seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals. This counter is relevant for plcpInternal(5) or plcpExternal(6) configur… |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.3.1.3.1.14 |
|
prtDs3IntervalPlcpRAI
Receiving Yellow/Remote Alarm Indication. This counter is
relevant for PLCP (external/internal) frame types only. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.3.1.3.1.15 |
|
prtDs3IntervalPlcpBIP
The counter associated with the number of BIP errors,
encountered by a DS3 interface in the current 15 minute interval. This counter is relevant for PLCP (external/internal) frame types only. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.3.1.3.1.16 |
|
prtDs3IntervalPlcpFEBE
The counter associated with the number of FEBE
errors, encountered by a DS3 interface in the current 15 minute interval. This counter is relevant for PLCP (external/internal) frame types only. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.3.1.3.1.17 |
|
prtDs3IntervalBPV
Number of BPVs (Bi-Polar Violations) , encountered by a
DS3 interface in the specified 15 minute interval. This object is relevant only for Electrical Line of Fomi-E3/T3. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.3.1.3.1.18 |
|
prtDs3IntervalLCE
Number of LCE (Link Code Errors) encountered
by a DS3 interface in the specified 15 minute interval. This object is relevant only for Optical Links of Fomi-E3/T3. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.3.1.3.1.19 |
|
prtDs3IntervalStatus
The statuses of the current interval:
0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was partialy out. 4 - notValid - module is out. |
OctetString | .1.3.6.1.4.1.164.3.1.6.3.1.3.1.20 |
prtDs3TotalTable
table.1.3.6.1.4.1.164.3.1.6.3.1.4
·
1 row entry
·
4 columns
A list of Total entries.
An entry of Total table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
prtDs3TotalUAS
Number of UASs (Unavailable Seconds) , encountered by a
DS3 interface in the previous 96 intervals. Invalid 15 minute intervals count as 0. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.3.1.4.1.6 |
|
prtDs3TotalBPV
Number of BPVs (Bi-Polar Violations) , encountered by a
DS3 interface in the previous 96 intervals. Invalid 15 minute intervals count as 0. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.3.1.4.1.17 |
|
prtDs3TotalLCE
Number of LCE (Link Code Errors) encountered
by a DS3 interface in the previous 96 intervals. Invalid 15 minute intervals count as 0. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.3.1.4.1.18 |
|
prtDs3TotalSES
Number of SES (Severely Errored Seconds) encountered
by a DS3 interface in the previous 96 intervals. Invalid 15 minute intervals count as 0. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.3.1.4.1.19 |
dsx3XConfigTable
table.1.3.6.1.4.1.164.3.1.6.3.2
·
1 row entry
·
2 columns
An extension to the DS3 Configuration table.
An entry containing additional configuration
parameters.
parameters.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
dsx3AisEnable
Enable/ disable AIS transmit when Ethernet (for TDMoIP) line is disconnected.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.3.2.1.1 |
|
dsx3TxClockSource
The source of Transmit Clock.
loopTiming indicates that the recovered receive clock is used as the transmit clock. localTiming indicates that a local clock source is used or that an externa… |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.3.2.1.2 |
dsx3MappingTable
table.1.3.6.1.4.1.164.3.1.6.3.3
·
1 row entry
·
3 columns
The DS3/E3 mapping table associates DS3/E3 channels
with logical or physical interfaces.
For example, consider a DS3 device with 16 T1's and 1 VCG.
There are 28 logical/internal channels, numbered 1 through 28
but only 17 are actually connected.
We might describe the allocation of channels, in the dsx3MappingTable, as
follows:
dsx3MappingIfIndex.1. 1 = 1001 dsx3MappingIfIndex.1.15 = 1015
dsx3MappingIfIndex.1. 2 = 1002 dsx3MappingIfIndex.1.16 = 1016
dsx3MappingIfIndex.1. 3 = 1003 dsx3MappingIfIndex.1.17 = 1017
dsx3MappingIfIndex.1. 4 = 1004 dsx3MappingIfIndex.1.18 = 0
dsx3MappingIfIndex.1. 5 = 1005 dsx3MappingIfIndex.1.19 = 0
dsx3MappingIfIndex.1. 6 = 1006 dsx3MappingIfIndex.1.20 = 0
dsx3MappingIfIndex.1. 7 = 1007 dsx3MappingIfIndex.1.21 = 0
dsx3MappingIfIndex.1. 8 = 1008 dsx3MappingIfIndex.1.22 = 0
dsx3MappingIfIndex.1. 9 = 1009 dsx3MappingIfIndex.1.23 = 0
dsx3MappingIfIndex.1.10 = 1010 dsx3MappingIfIndex.1.24 = 0
dsx3MappingIfIndex.1.11 = 1011 dsx3MappingIfIndex.1.25 = 0
dsx3MappingIfIndex.1.12 = 1012 dsx3MappingIfIndex.1.26 = 0
dsx3MappingIfIndex.1.13 = 1013 dsx3MappingIfIndex.1.27 = 0
dsx3MappingIfIndex.1.14 = 1014 dsx3MappingIfIndex.1.28 = 0
Note that in the case above all channels are mapped to one T3 port with ifIndex = 1.
The Channels 1...28 are represented via the 2nd index.
The values of 1001...1016 are the T1 interface ifIndexes.
The value of 1017 is the ifIndex of the VCG.
Unconnected channels have a value of 0.
An entry in the DS3 mapping table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
dsx3MappingDs3Index
The index value which uniquely identifies the
DS3/E3 interface to which this entry is applicable. This value is also equal to dsx3LineIndex used in dsx3ConfigEntry. For RICi-16 this is the … |
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.164.3.1.6.3.3.1.1 |
|
dsx3MappingNumber
The channel number for this entry.
For RICi-16 this is the channel number 1...28. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.3.3.1.2 |
|
dsx3MappingIfIndex
An index value that uniquely identifies a logical or physical
interface mapped to a DS3/E3 channel. If no interface is currently using a channel, the value should be zero. If a single interface occupies more than one c… |
IF-MIBInterfaceIndexr/w Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.164.3.1.6.3.3.1.3 |
dsx1XCurrentTable
table.1.3.6.1.4.1.164.3.1.6.4.1.2
·
1 row entry
·
12 columns
A list of current statistics entries. This table contains additional objects for the current table.
An entry containing additional statistical counters
applicable to a particular current table.
applicable to a particular current table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
dsx1CurrentLOS
The counter associated with the number of LOS
seconds, encountered by a DS1 interface in the current 15 minute interval. |
PerfHist-TC-MIBPerfCurrentCount Enumerated Values:
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.2.1.1 |
||||||||||
|
dsx1CurrentLOF
The counter associated with the number of LOF
seconds, encountered by a DS1 interface in the current 15 minute interval. |
PerfHist-TC-MIBPerfCurrentCount Enumerated Values:
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.2.1.2 |
||||||||||
|
dsx1CurrentLOC
Loss Of Cell delineation. Counts number of cells the ATM UNI cells receiver
lost cells delineation . |
PerfHist-TC-MIBPerfCurrentCount Enumerated Values:
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.2.1.3 |
||||||||||
|
dsx1CurrentAIS
The counter associated with the number of AIS
seconds, encountered by a DS1 interface in the current 15 minute interval. |
PerfHist-TC-MIBPerfCurrentCount Enumerated Values:
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.2.1.4 |
||||||||||
|
dsx1CurrentRAI
Remote Alarm Indication: Transmitted in the outgoing direction
(toward the PABX) over FDL bits when the DS1 device detected an incoming Loss Of Frame. Received from the far end (PABX) over FDL when it detects a Loss … |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.2.1.5 |
||||||||||
|
dsx1CurrentLOMF
Loss of Multi-Frame sequence in E1 time slot 16.
|
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.2.1.6 |
||||||||||
|
dsx1CurrentFEBE
Far End Block Errors, as reported in the first bit
of frames 13 and 15, on multiframe E1 lines with CRC4, in the current 15 minute interval. |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.2.1.7 |
||||||||||
|
dsx1CurrentStatus
The statuses of the current interval:
0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was partialy out. 4 - notValid - module is out. |
OctetString Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.4.1.2.1.8 |
||||||||||
|
dsx1CurrentBPV
The counter associated with the number of BPVs (Bi-Polar Violations)
encountered by a DS1 interface in the current 15 minute interval. |
PerfHist-TC-MIBPerfCurrentCount Enumerated Values:
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.2.1.9 |
||||||||||
|
dsx1CurrentLOCRCMF
Loss of CRC4 Multi-Frame sequence in E1.
encountered in the current 15 minute interval |
PerfHist-TC-MIBPerfCurrentCount Enumerated Values:
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.2.1.10 |
||||||||||
|
dsx1CurrentLOFC
Counts the number of loss of frame events measured.
encountered in the current 15 minute interval |
PerfHist-TC-MIBPerfCurrentCount Enumerated Values:
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.2.1.11 |
||||||||||
|
dsx1CurrentCRCErrors
Counts the number of CRC error events,
encountered in the current 15 minute interval. |
PerfHist-TC-MIBPerfCurrentCount Constraints: range: 4-4Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.2.1.12 |
dsx1XIntervalTable
table.1.3.6.1.4.1.164.3.1.6.4.1.3
·
1 row entry
·
11 columns
A list of Interval entries. This table contains additional objects for the interval table.
An entry containing additional statistical counters
applicable to a particular interval table.
applicable to a particular interval table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
dsx1IntervalLOS
The counter associated with the number of LOS
seconds , encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
PerfHist-TC-MIBPerfIntervalCount Enumerated Values:
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.3.1.1 |
||||||||||||||||||
|
dsx1IntervalLOF
The counter associated with the number of OOF
seconds, encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
PerfHist-TC-MIBPerfIntervalCount Enumerated Values:
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.3.1.2 |
||||||||||||||||||
|
dsx1IntervalLOC
Loss Of Cell delineation. Counts number of cells the ATM UNI cells receiver
lost cells delineation . |
PerfHist-TC-MIBPerfIntervalCount Enumerated Values:
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.3.1.3 |
||||||||||||||||||
|
dsx1IntervalAIS
The counter associated with the number of AIS
seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals. |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.3.1.4 |
||||||||||||||||||
|
dsx1IntervalRAI
Remote Alarm Indication: Transmitted in the outgoing direction
(toward the PABX) over FDL bits when the DS1 device detected an incoming Loss Of Frame. Received from the far end (PABX) over FDL when it detects a Loss … |
PerfHist-TC-MIBPerfIntervalCount Enumerated Values:
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.3.1.5 |
||||||||||||||||||
|
dsx1IntervalLOMF
Loss of Multi-Frame sequence in E1 time slot 16.
|
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.3.1.6 |
||||||||||||||||||
|
dsx1IntervalFEBE
Far End Block Errors, as reported in the first bit
of frames 13 and 15, on multiframe E1 lines with CRC4, in one of the previous 96, individual, 15 minute intervals. |
PerfHist-TC-MIBPerfIntervalCount Enumerated Values:
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.3.1.7 |
||||||||||||||||||
|
dsx1IntervalStatus
The statuses of the current interval:
0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was partialy out. 4 - notValid - module is out. |
OctetString Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.4.1.3.1.8 |
||||||||||||||||||
|
dsx1IntervalBPV
The counter associated with the number of BPV (Bi-Polar Violations)
encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.3.1.9 |
||||||||||||||||||
|
dsx1IntervalLOCRCMF
Loss of CRC4 Multi-Frame sequence in E1.
|
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.3.1.10 |
||||||||||||||||||
|
dsx1IntervalLOFC
Counts the number of loss of frame events measured
in one of the previous 96, individual 15 minute, intervals. |
PerfHist-TC-MIBPerfIntervalCount Enumerated Values:
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.3.1.11 |
dsx1XTotalTable
table.1.3.6.1.4.1.164.3.1.6.4.1.4
·
1 row entry
·
3 columns
A list of Total statistics entries. This table contains additional objects for the Total table.
An entry containing additional statistical counters
applicable to a particular current table.
applicable to a particular current table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
dsx1TotalLOS
The counter associated with the number of LOS (Loss of Signal)
seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
PerfHist-TC-MIBPerfTotalCount Enumerated Values:
Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.4.1.1 |
||||||||
|
dsx1TotalBPV
The counter associated with the number of BPV (Bi-Polar Violations)
encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
PerfHist-TC-MIBPerfTotalCount Enumerated Values:
Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.4.1.9 |
||||||||
|
dsx1TotalLOFC
The counter associated with the number loss of frames
encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
PerfHist-TC-MIBPerfTotalCount Enumerated Values:
Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32 |
.1.3.6.1.4.1.164.3.1.6.4.1.4.1.11 |
dsx1DataStreamStatTable
table.1.3.6.1.4.1.164.3.1.6.4.1.5
·
1 row entry
·
11 columns
The DS1 Data Stream Statistics table.
An entry in the DS1 Data Stream Statistics table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
dsx1DataStreamStatIfIndex
The index of the DS1 interface.
It may be ifIndex. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.4.1.5.1.1 |
||||||||
|
dsx1DataStreamStatIndex
The DS1 Data Stream Index.
For Vmux - the following indices are used: 1 for Transparent 2-3 for SS71-SS72 (respectively) 4-7 for Data1-Data4 (respectively) 8 for HDLC Ph2 Compatible 9-16 for Sub-CH1-1...… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.4.1.5.1.2 |
||||||||
|
dsx1DataStreamStatValid
Indicates whether this Data Stream is valid or not.
When invalid - all counters are irrelevant. |
SNMPv2-TCTruthValue Enumerated Values:
Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.164.3.1.6.4.1.5.1.3 |
||||||||
|
dsx1DataStreamStatInFrames
The counter associated with the number of received frames,
encountered by the DS1 Data Stream. |
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.4.1.5.1.4 |
||||||||
|
dsx1DataStreamStatInBytes
The counter associated with the number of received bytes,
encountered by the DS1 Data Stream. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.4.1.5.1.5 |
||||||||
|
dsx1DataStreamStatInDiscards
The counter associated with the number of Discarded incoming frames,
encountered by the DS1 Data Stream. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.4.1.5.1.6 |
||||||||
|
dsx1DataStreamStatInErrors
The counter associated with the number of received Errored frames,
encountered by the DS1 Data Stream. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.4.1.5.1.7 |
||||||||
|
dsx1DataStreamStatOutFrames
The counter associated with the number of transmitted frames,
encountered by the DS1 Data Stream. |
SNMPv2-SMICounter32 Constraints: range: 4-4Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.4.1.5.1.8 |
||||||||
|
dsx1DataStreamStatOutBytes
The counter associated with the number of transmitted bytes,
encountered by the DS1 Data Stream. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.4.1.5.1.9 |
||||||||
|
dsx1DataStreamStatOutDiscards
The counter associated with the number of Discarded outgoing frames,
encountered by the DS1 Data Stream. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.4.1.5.1.10 |
||||||||
|
dsx1DataStreamStatOutErrors
The counter associated with the number of errored transmitted frames,
encountered by the DS1 Data Stream. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.4.1.5.1.11 |
dsx1XConfigTable
table.1.3.6.1.4.1.164.3.1.6.4.2
·
1 row entry
·
23 columns
An extension to the DS1 Configuration table.
An entry containing additional configuration
parameters.
parameters.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
dsx1IdleCode
Byte pattern of the data received/transmitted in the
E1T1 framer idle timeslots. Valid range: (0 - FF HEX). |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.4.2.1.1 |
||||||||||||||||||||||||||
|
dsx1LineMode
T1 device operation mode.
Valid for T1 only. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.4.2.1.2 |
||||||||||||||||||||||||||
|
dsx1dBTxGain
Transmit line Gain for T1 CSU line mode.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.4.2.1.3 |
||||||||||||||||||||||||||
|
dsx1RxSensitivity
Low Sensitivity is considered Short Haul while High Sensitivity
is considered Long Haul. The actual values depend on the LIU. Examples: - E1: -12dB is considered Short Haul ; -43dB is considered Long Haul - T1: -12dB i… |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.4.2.1.4 |
||||||||||||||||||||||||||
|
dsx1RestoreTime
Used to change the sync. algorithms to reduce the time
required for the port to return to normal operation after a RED alarm. 'sec1' = Fast, 'sec10' = TR-6211, 'immediate' = CCITT |
Enumerationr/w Constraints: range: 1-96 |
.1.3.6.1.4.1.164.3.1.6.4.2.1.5 |
||||||||||||||||||||||||||
|
dsx1TcFirstSignal
Trunk conditioning signal - value to be sent as a signal
during the first 2.5 seconds after alarm detection. Range is 0x0..0xF. 0xFF is a NULL value. This variable is used also for Space Signaling Code (in this cas… |
SNMPv2-SMIInteger32r/w Constraints: range: 4-4Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.4.2.1.6 |
||||||||||||||||||||||||||
|
dsx1TcSignal
Trunk conditioning signal value after alarm detection.
Range is 0x1..0xF for E1, and 0x0..0xF for T1. This variable is used also for Space Signaling Code (E1 and T1). |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.4.2.1.7 |
||||||||||||||||||||||||||
|
dsx1TcPattern
Trunk conditioning data pattern to be sent upon a DS0 fail.
Range is 0x0..0xFF. This variable used also for Out of Service Code. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.4.2.1.8 |
||||||||||||||||||||||||||
|
dsx1Scramble
Scrambling is an operation that randomizes the bits
of the payload of the ATM cell by a polynom. This operation helps with the error detection mechanism of the HEC. Not applicable for E1. active - will scramble/descram… |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.4.2.1.9 |
||||||||||||||||||||||||||
|
dsx1LineAdaptiveTimingMode
Enables end to end clock synchronization.
Default value - off. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.4.2.1.10 |
||||||||||||||||||||||||||
|
dsx1TxClockSource
The source of Transmit Clock.
'loopTiming' indicates that the recovered receive clock is used as the transmit clock. 'localTiming' indicates that a local clock source is used or when an external clock … |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.4.2.1.11 |
||||||||||||||||||||||||||
|
dsx1AisEnable
Enable/ disable AIS transmit when Ethernet cable (for TDMoIP) is out (disconnected).
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.4.2.1.12 |
||||||||||||||||||||||||||
|
dsx1TsEchoCancel
This parameter defines for each TS whether Echo-Cancellation is on.
Each bit represents one TS as follow: First octet bit'0' = TS#1, bit'7' = TS#8, .. 2nd octet bit'0' = TS#9,.., 4th octet bit'7' = TS#32. Octets and bi… |
OctetStringr/w | .1.3.6.1.4.1.164.3.1.6.4.2.1.13 |
||||||||||||||||||||||||||
|
dsx1EchoCancelerModule
This parameter indicates whether echo-cancellation module
exists for this line. |
Enumeration | .1.3.6.1.4.1.164.3.1.6.4.2.1.14 |
||||||||||||||||||||||||||
|
dsx1PortFunction
This object determines the ATM Mode over the
physical port. uni - The port will function as an ATM UNI. ces - The port will function as a CES. ima - The port will function as an IMA-ATM. cesPsn - The port will… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.4.2.1.15 |
||||||||||||||||||||||||||
|
dsx1PortMultiplier
This object determines the data rate of each TS
(Kbps units). This parameter is applicable for T1 only. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.4.2.1.16 |
||||||||||||||||||||||||||
|
dsx1LeasedLine
This parameter defines whether Line mode is regular (non Leased Line mode)
or transparent (Leased Line mode). |
Enumerationr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.164.3.1.6.4.2.1.17 |
||||||||||||||||||||||||||
|
dsx1CsuLoop
This parameter defines where the CSU loop will be done:
local - locally (by IPmux) towards the TDM device transparent - transferred to Remote Device that will send it to its connected TDM device. remote -… |
Enumerationr/w Constraints: range: 0-990 |
.1.3.6.1.4.1.164.3.1.6.4.2.1.18 |
||||||||||||||||||||||||||
|
dsx1ClockSource
This entry specifies the source from which the clock will be taken.
Refer to device specification for source Index |
SNMPv2-SMIInteger32r/w Constraints: range: 0-990Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.4.2.1.19 |
||||||||||||||||||||||||||
|
dsx1OosSignal
This parameter defines the value to be sent as a signal
after alarm detection: 'Space' = both A and B signaling bits are forced to '0' during out-of-service periods. 'Mark' = both A and B signaling bits a… |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.4.2.1.20 |
||||||||||||||||||||||||||
|
dsx1BundleNextIndex
This parameter indicates the Next free Bundle Index for this DS1 port.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.4.2.1.21 |
||||||||||||||||||||||||||
|
dsx1CRC6CalcMode
This object determines the CRC6 Calculation mode.
jtG704 =JT-G704 = the Japanese standard ituG704=ITU-G704 = the International standard This parameter is applicable for J1 only. |
Enumerationr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.1.6.4.2.1.22 |
||||||||||||||||||||||||||
|
dsx1SendUponFail
This object determines which notification will be sent to the other side
upon fail of another interface. In Ipmux14 the notification is sent upon failure of the Ethernet link. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.4.2.1.23 |
hdlcTable
table.1.3.6.1.4.1.164.3.1.6.5.1
·
1 row entry
·
12 columns
The HDLC configuration table.
Defines the contents of each line in the RAD HDLC Table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hdlcProtocol
The HDLC protocol type
V35 - HDLC encapsulated over V35 X21 - HDLC encapsulated over X21 RS530 - HDLC encapsulated over RS530 cisco - Compatible to Cisco HDLC format. lapd - LAPD over HDLC. laps - LAPS over HDLC… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.5.1.1.1 |
||||||||||||||||||||||||||
|
hdlcRateResolution
The baud rate of the internal clock.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.5.1.1.2 |
||||||||||||||||||||||||||
|
hdlcTxClockSource
The baud rate of the internal clock.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.5.1.1.3 |
||||||||||||||||||||||||||
|
hdlcTerminalMode
.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.5.1.1.4 |
||||||||||||||||||||||||||
|
hdlcLoopbackState
internal - All data coming from the
network port is looped back external - All data comming from the line is looped back. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.5.1.1.5 |
||||||||||||||||||||||||||
|
hdlcTxClockPolarity
normal - The transmitted data is sampled at the middle of bit time
inverse - The transmitted data is sampled at the end of the bit time (high data rate/long cable). |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.5.1.1.6 |
||||||||||||||||||||||||||
|
hdlcFlowControl
Enable/Disable the CTS/RTS flow control signals.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.5.1.1.7 |
||||||||||||||||||||||||||
|
hdlcLineRate
The rate values for HDLC are n*56/64Kbps, where 1<=n<=32, 64, 128
and the following values: 1544, 3088, 6176. The rate values for HSSI is nMbps, where 1<=n<=52. |
SNMPv2-SMIInteger32r/w Constraints: range: 1-255Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.5.1.1.8 |
||||||||||||||||||||||||||
|
hdlcRxClockMode
.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.5.1.1.9 |
||||||||||||||||||||||||||
|
hdlcLOF
Total number of seconds the port is in Loss Of Frame state.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.5.1.1.10 |
||||||||||||||||||||||||||
|
hdlcRxClockPolarity
normal - The received data is sampled at the middle of bit time
inverse - The received data is sampled at the end of the bit time (high data rate/long cable). |
Enumerationr/w Constraints: range: 0-255 |
.1.3.6.1.4.1.164.3.1.6.5.1.1.11 |
||||||||||||||||||||||||||
|
hdlcRateCompatibility
This parameter defines whether limit the port HDLC rate according to the Far-End device.
For exaple: limit the HDLC rate from 4000 PPS and 3000 PPS. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.5.1.1.12 |
hdlcCurrentTable
table.1.3.6.1.4.1.164.3.1.6.5.2.1
·
1 row entry
·
8 columns
The HDLC Current table.
An entry in the HDLC Current table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hdlcCurrentIfIndex
The index of the HDLC interface.
It may be ifIndex. |
SNMPv2-SMIInteger32 Constraints: range: 0-65535Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.5.2.1.1.1 |
||||||||||||||||||||||||||
|
hdlcCurrentStatus
The statuses of the current interval:
0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was partialy out. 4 - notValid - module is out. |
OctetString | .1.3.6.1.4.1.164.3.1.6.5.2.1.1.2 |
||||||||||||||||||||||||||
|
hdlcCurrentLOF
The counter associated with the number of seconds the
port is in Loss Of Frame state, encountered by the HDLC interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.5.2.1.1.3 |
||||||||||||||||||||||||||
|
hdlcCurrentInFrames
The counter associated with the number of received frames,
encountered by the HDLC interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.5.2.1.1.4 |
||||||||||||||||||||||||||
|
hdlcCurrentInErrors
The counter associated with the number of Errored received
frames, encountered by the HDLC interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.5.2.1.1.5 |
||||||||||||||||||||||||||
|
hdlcCurrentOutFrames
The counter associated with the number of transmitted frames,
encountered by the HDLC interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.5.2.1.1.6 |
||||||||||||||||||||||||||
|
hdlcCurrentAbortedFrames
The counter associated with the number of frames, in which
at least seven consecutive '1'-s (Abort sequence) were encountered by the HDLC interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.5.2.1.1.7 |
||||||||||||||||||||||||||
|
hdlcCurrentLengthError
The counter associated with the number of received frames
with length error, encountered by the HDLC interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.5.2.1.1.8 |
hdlcIntervalTable
table.1.3.6.1.4.1.164.3.1.6.5.2.2
·
1 row entry
·
9 columns
The HDLC Interval table.
An entry in the HDLC Interval table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
hdlcIntervalIfIndex
The index of the HDLC interface.
It may be ifIndex. |
SNMPv2-SMIInteger32 Constraints: range: 0-32Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.5.2.2.1.1 |
||||||||
|
hdlcIntervalNumber
A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals exist). |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.5.2.2.1.2 |
||||||||
|
hdlcIntervalStatus
The statuses of the current interval:
0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was partialy out. 4 - notValid - module is out. |
OctetString Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.5.2.2.1.3 |
||||||||
|
hdlcIntervalLOF
The counter associated with the number of seconds the
port is in Loss Of Frame state, encountered by an HDLC interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Constraints: range: 0-7Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.5.2.2.1.4 |
||||||||
|
hdlcIntervalInFrames
The counter associated with the number of received frames,
encountered by the HDLC interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.5.2.2.1.5 |
||||||||
|
hdlcIntervalInErrors
The counter associated with the number of Errored received
frames, encountered by the HDLC interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.5.2.2.1.6 |
||||||||
|
hdlcIntervalOutFrames
The counter associated with the number of transmitted
frames, encountered by the HDLC interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.5.2.2.1.7 |
||||||||
|
hdlcIntervalAbortedFrames
The counter associated with the number of frames, in which
at least seven consecutive '1'-s (Abort sequence) were encountered by the HDLC interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.5.2.2.1.8 |
||||||||
|
hdlcIntervalLengthError
The counter associated with the number of received frames
with length error, encountered by the HDLC interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.5.2.2.1.9 |
nplPulseTable
table.1.3.6.1.4.1.164.3.1.6.6.1.1.4
·
1 row entry
·
5 columns
NPL Pulse table. This table is written directly to the agent.
An entry in table nplPulseTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
nplPulseType
Pulse Type
|
Enumeration Constraints: range: 1-8 |
.1.3.6.1.4.1.164.3.1.6.6.1.1.4.1.1 |
||||||||||
|
nplPulseValid
Validity of the Pulse Type.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.6.1.1.4.1.2 |
||||||||||
|
nplPulseDurationType
Pulse Duration Type.
- If meteringPulse1 and meteringPulse2 are both 'valid', the value of this object must be different for them. - If initRinging1 and initRinging2 are both 'valid', the value of this object must… |
Integer32r/w | .1.3.6.1.4.1.164.3.1.6.6.1.1.4.1.3 |
||||||||||
|
nplPulseOnTime
How much time the pulse is ON, in msec.
0 is a valid value only when nplPulseValid=notValid. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.164.3.1.6.6.1.1.4.1.4 |
||||||||||
|
nplPulseOffTime
How much time the pulse is OFF, in msec.
|
Integer32r/w | .1.3.6.1.4.1.164.3.1.6.6.1.1.4.1.5 |
v51VarTable
table.1.3.6.1.4.1.164.3.1.6.6.2.1
·
1 row entry
·
9 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry.
An entry in table v51VarTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
v51VarCnfgIdx
This attribute indicates the Idx of the Cnfg being accessed.
255 = TmpCnfg. 1 = Current Cnfg. Write is allowed only to TmpCnfg. |
Integer32 | .1.3.6.1.4.1.164.3.1.6.6.2.1.1.1 |
||||||||||||||||||||||||||||||||||
|
v51VarSltIdx
Slot Index.
For V5.2, this index will be the Slot of the V5.2 Master ML. |
Enumeration | .1.3.6.1.4.1.164.3.1.6.6.2.1.1.2 |
||||||||||||||||||||||||||||||||||
|
v51VarPrtIdx
This attribute indicates a unique port number of the ML having
V5 interface. Valid values: exPrt1 (1)..exPrt4 (4), inPrt1(101)..inPrt4(104), notApplicable(255) - for V5.2 only. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.6.2.1.1.3 |
||||||||||||||||||||||||||||||||||
|
v51VarIdx
Variant Id.
Valid values: - for Current Cnfg: 0..127 - for Tmp Cnfg: until MP R9 : 255 only. from MP R10: 0..127. |
Integer32 | .1.3.6.1.4.1.164.3.1.6.6.2.1.1.4 |
||||||||||||||||||||||||||||||||||
|
v51VarPstnCch
This object indicates which TS will be used for PSTN C channel.
For V5.2 - notApplicable. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.6.2.1.1.5 |
||||||||||||||||||||||||||||||||||
|
v51VarIsdnSTypeCch
This object indicates which TS will be used for S-Type C channel.
For V5.2 - notApplicable. |
Enumerationr/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.164.3.1.6.6.2.1.1.6 |
||||||||||||||||||||||||||||||||||
|
v51VarDescription
This object describes the Variant.
|
SNMPv2-TCDisplayStringr/w Enumerated Values:
Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.1.6.6.2.1.1.7 |
||||||||||||||||||||||||||||||||||
|
v51VarStatus
This object reports the status of an existing Variant of a link.
notActive - the variant exists on this link but is not active active - the variant exists on this link AND is active activeReq - the variant exists on … |
Enumeration | .1.3.6.1.4.1.164.3.1.6.6.2.1.1.8 |
||||||||||||||||||||||||||||||||||
|
v51VarRowStatus
This object enables to create new entries and delete existing entries
from the table. It is applicable only from MP R10. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.6.2.1.1.9 |
v51VarCfgTable
table.1.3.6.1.4.1.164.3.1.6.6.2.2
·
1 row entry
·
24 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry.
An entry in table v51VarCfgTable.
Indexes
v51MlSltIdx v51MlPrtIdx
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
v51VarCfgIndex
This attribute indicates the Idx of the Cnfg being accessed.
255 = TmpCnfg. 1 = Current Cnfg. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.6.2.2.1.1 |
||||||||||||||||||||||||||||||||||||
|
v51VarCfgSltIdx
Slot Index.
For V5.2, this index will be the Slot of the V5.2 Master ML. |
Enumeration | .1.3.6.1.4.1.164.3.1.6.6.2.2.1.2 |
||||||||||||||||||||||||||||||||||||
|
v51VarCfgPrtIdx
This attribute indicates a unique port number of the ML having
V5 interface. Valid values: exPrt1 (1)..exPrt4 (4), inPrt1(101)..inPrt4(104) notApplicable(255) - for V5.2 only. |
SNMPv2-SMIInteger32 Constraints: range: 0-128Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.6.2.2.1.3 |
||||||||||||||||||||||||||||||||||||
|
v51VarCfgIdx
Variant Id.
Valid values: - for Current Cnfg: 0..127 - for Tmp Cnfg: until MP R9 : 255 only. from MP R10: 0..127. |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.164.3.1.6.6.2.2.1.4 |
||||||||||||||||||||||||||||||||||||
|
v51VarCfgTsIdx
For V5.1: Time Slot index (1..31).
For V5.2: Running Index (1..1320) for Address Table. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.6.2.2.1.5 |
||||||||||||||||||||||||||||||||||||
|
v51VarCfgTsType
Time Slot Type.
|
Enumerationr/w Constraints: range: 0-127 |
.1.3.6.1.4.1.164.3.1.6.6.2.2.1.6 |
||||||||||||||||||||||||||||||||||||
|
v51VarCfgPrtId
This object indicates the IO Port Id this TS is connected to.
For V5.2, the Port Id is a concatenation of SS:PP:TS of the port connected to V5.2 Master. SS=IO Slot (1..12) PP=Port (01..16) TS = TS (00 for ports tha… |
Integer32r/w Constraints: range: 0-127 |
.1.3.6.1.4.1.164.3.1.6.6.2.2.1.7 |
||||||||||||||||||||||||||||||||||||
|
v51VarCfgEfL3Addr
This object indicates the Address of the IO port this TS is connected to.
The IO port is identified according to its Address: - for ISDN ports: EF Address. Valid values: 0..8175 - for PSTN ports: L3 Address. Valid valu… |
Integer32r/w Constraints: range: 0-127 |
.1.3.6.1.4.1.164.3.1.6.6.2.2.1.8 |
||||||||||||||||||||||||||||||||||||
|
v51VarCfgFTypeCch
For V5.1 - this object indicates which TS will be used for F-Type C channel.
notApplicable (1), ts15 (2), ts16 (3), ts31 (4) For V5.2 - this object indicates the Logical C Channel F Typ… |
SNMPv2-SMIInteger32r/w Constraints: range: 0-127Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.6.2.2.1.9 |
||||||||||||||||||||||||||||||||||||
|
v51VarCfgPTypeCch
For V5.1 - This object indicates which TS will be used for P-Type C channel.
notApplicable (1), ts15 (2), ts16 (3), ts31 (4) For V5.2 - this object indicates the Logical C Channel P Typ… |
SNMPv2-SMIInteger32r/w Constraints: range: 0-127Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.6.2.2.1.10 |
||||||||||||||||||||||||||||||||||||
|
v51VarCfgConSlt
The Slot containing the IO port this TS is connected to.
For V5.2 this object is notApplicable. |
Enumeration | .1.3.6.1.4.1.164.3.1.6.6.2.2.1.11 |
||||||||||||||||||||||||||||||||||||
|
v51VarCfgConPrt
The IO Port this TS is connected to.
Valid values: exPrt1 (1)..exPrt12 (12), inPrt1(101)..inPrt4(104). 100=noConnect For V5.2 this object is notApplicable=255. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.6.2.2.1.12 |
||||||||||||||||||||||||||||||||||||
|
v51VarCfgIoState
The State of the IO port this TS is connected to.
This object is not applicable for v51VarCfgIndex=255=TmpCnfg. normal(2) - will be used for operating normally (operate) localBlocked(5) - will be used for general Block … |
Enumeration Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.1.6.6.2.2.1.13 |
||||||||||||||||||||||||||||||||||||
|
v51VarCfgBlock
This object indicates if this TS will be Blocked or not and how:
block - done locally blockRequest - according to external request of the telephone exchange. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.6.2.2.1.14 |
||||||||||||||||||||||||||||||||||||
|
v51VarCfgExtDch
For V5.1: This object indicates if this TS is an ISDN D channel that
comes via Bypass from a non-V5.1 ML. For V5.2: this object will be notApplicable (not supported). |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.6.2.2.1.15 |
||||||||||||||||||||||||||||||||||||
|
v51VarCfgExtDchSlot
This object is applicable only if v51VarCfgExtDch=yes(3).
It indicates the Slot of the non-V5.1 ML on which the External D channel TS is defined (and is transferred via Bypass between the V5.1 ML and the non-V5.1 ML.) N… |
Enumerationr/w Constraints: range: 0-99999999 |
.1.3.6.1.4.1.164.3.1.6.6.2.2.1.16 |
||||||||||||||||||||||||||||||||||||
|
v51VarCfgExtDchPort
This object is applicable only if v51VarCfgExtDch=yes(3).
It indicates the Port on the Slot of 'v51VarCfgExtDchSlot' of the non-V5.1 ML on which the External D channel TS is defined (and is transferred via Bypass betw… |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.6.2.2.1.17 |
||||||||||||||||||||||||||||||||||||
|
v51VarCfgExtDchTs
This object is applicable only if v51VarCfgExtDch=yes(3).
It indicates the TS on the non-V5 ML on which the External D channel TS is defined (and is transferred via Bypass between the V5 ML and the non-V5 ML.) For V5.… |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.6.2.2.1.18 |
||||||||||||||||||||||||||||||||||||
|
v51VarCfgExtDchCmpr
For V5.1 - this object is applicable only if v51VarCfgExtDch=yes(3).
It indicates if this ISDN D channel TS is Compressed or not. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.6.2.2.1.19 |
||||||||||||||||||||||||||||||||||||
|
v51VarCfgExtDchRate
For V5.1 - this object is applicable only if v51VarCfgExtDch=yes(3).
It indicates the Rate of the ISDN D channel. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.6.2.2.1.20 |
||||||||||||||||||||||||||||||||||||
|
v51VarCfgExtDchStartBit
For V5.1 - this object is applicable only if v51VarCfgExtDch=yes(3).
It indicates the Start Bit of the ISDN D channel on the TS of the non-V5.1 ML on which it is defined. Valid values: - for v51VarCfgExtDchRate… |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.6.2.2.1.21 |
||||||||||||||||||||||||||||||||||||
|
v51VarCfgSTypeCch
This object is supported only by V5.2. It indicates the Logical
C Channel S Type (0..65535). 65536=not applicable. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.6.2.2.1.22 |
||||||||||||||||||||||||||||||||||||
|
v51VarCfgStatus
This object is supported only by V5.2.
It enables to create new entries and delete existing entries from the table. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.6.2.2.1.23 |
||||||||||||||||||||||||||||||||||||
|
v51VarCfgV52MasterTsa
This object is supported only by V5.2.
This will be the V5.2 Master, Switch Allocated Location. It is a concatenation of SS:PP:TS of the V5.2 Master. It indicates which is the exact port and TS allocated by the Loca… |
SNMPv2-SMIInteger32 Constraints: range: 1-255Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.6.2.2.1.24 |
v5VarCchTable
table.1.3.6.1.4.1.164.3.1.6.6.2.3
·
1 row entry
·
9 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry.
An entry in table v5VarCchTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
v5VarCchCfgIndex
This attribute indicates the Idx of the Cnfg being accessed.
255 = TmpCnfg. 1 = Current Cnfg. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.6.2.3.1.1 |
||||||||||||||||||||
|
v5VarCchVarIdx
Variant Id.
Valid values: 0..127. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.6.2.3.1.2 |
||||||||||||||||||||
|
v5VarCchIdx
C-CH Id.
There are only 8 possible C-CHs per Variant. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.6.2.3.1.3 |
||||||||||||||||||||
|
v5VarCchType
C-CH Type.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.6.2.3.1.4 |
||||||||||||||||||||
|
v5VarCchPhyLinkNo
The Physical Link Number of the card (1..4).
This object is applicable only if v51VarCchType is not 'none'. notApplicable=255. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.6.2.3.1.5 |
||||||||||||||||||||
|
v5VarCchLogicalId
The Logical C-CH Id. (0..65535)
When v51VarCchType is 'none', this object is irrelevant. |
Integer32r/w | .1.3.6.1.4.1.164.3.1.6.6.2.3.1.6 |
||||||||||||||||||||
|
v5VarCchTs
The C-CH TS. Valid values: 16, 15, 31.
If v51VarCchType=primary or secondary, the value must be 16 (RO). This object is applicable only if v51VarCchType is not 'none'. notApplicable=0. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.6.2.3.1.7 |
||||||||||||||||||||
|
v5VarCchPstn
PSTN C-CH.
Only one entry can have the value 'yes'. notApplicable - when v51VarCchType is none, secondary or standby. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.6.2.3.1.8 |
||||||||||||||||||||
|
v5VarCchIsdnTypes
ISDN Types of C-CH.
This object is a sum of 2**n, where n=Bit No. and Bit is '1': Bit No. ISDN Type 0 P 1 F 2 S Bit value '1'= Yes Bit value '0'= No Example… |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.6.2.3.1.9 |
v5VarStatTable
table.1.3.6.1.4.1.164.3.1.6.6.2.4
·
1 row entry
·
7 columns
This is a RO table. It includes only the Active Addresses of the Active Variant, their minimal Config data and Status.
An entry in table v5VarStatTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
v5VarStatIdx
Running Index (1..120). Up to 120 calls can be active at the same time
on the Active Variant. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.6.2.4.1.1 |
||||
|
v5VarStatPrtId
This object indicates the IO Port Id, the Address is connected to.
The Port Id is a concatenation of SS:PP:TS of the port connected to an Address of the Active Variant running on the V5.2 Master card. SS=IO Slot (1..12… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.6.2.4.1.2 |
||||
|
v5VarStatPortType
Address Port Type.
|
Enumeration | .1.3.6.1.4.1.164.3.1.6.6.2.4.1.3 |
||||
|
v5VarStatEfL3Addr
This object indicates the EF/L3 Address of the IO port this entry
is connected to. The IO port is identified according to its EF/L3 Address: - for ISDN ports: EF Address. Valid values: 0..8175 - for PSTN ports: L3 Add… |
Integer32 | .1.3.6.1.4.1.164.3.1.6.6.2.4.1.4 |
||||
|
v5VarStatPortState
The State of the IO port this Address entry is connected to.
The values were designed to match the relevant values of v51VarCfgIoState. |
Enumeration | .1.3.6.1.4.1.164.3.1.6.6.2.4.1.5 |
||||
|
v5VarStatMasterTsa
This will be the V5.2 Master Switch Allocated TSA Location. It is
a concatenation of SS:PP:TS of the V5.2 Master card. It indicates which is the exact port and TS allocated by the Local Exchange on the V5.2 Link. … |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.6.2.4.1.6 |
||||
|
v5VarStatCallState
Call State of the Address.
|
Enumeration | .1.3.6.1.4.1.164.3.1.6.6.2.4.1.7 |
v51MlTable
table.1.3.6.1.4.1.164.3.1.6.6.3.1.1
·
1 row entry
·
10 columns
Variant Command and Status table.
An entry in table v51MlTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
v51MlSltIdx
Slot Index.
For V5.2 this index is notApplicable. |
Enumeration | .1.3.6.1.4.1.164.3.1.6.6.3.1.1.1.1 |
||||||||||||||||||||||||
|
v51MlPrtIdx
This attribute indicates a unique port number of the ML having
V5 interface. Valid values: exPrt1 (1)..exPrt4 (4), inPrt1(101)..inPrt4(104), notApplicable(255) - for V5.2 only. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.6.3.1.1.1.2 |
||||||||||||||||||||||||
|
v51MlCurrActiveVar
For V5.1: the currently Active Variant Id. on this ML.
For V5.2: the currently Active Variant Id. 128=none. |
Integer32 | .1.3.6.1.4.1.164.3.1.6.6.3.1.1.1.3 |
||||||||||||||||||||||||
|
v51MlLeActiveReqVar
For V5.1: the Variant Id. that the Local Exchange (LE)
requested to be Active on this ML. For V5.2: the Variant Id. that the Local Exchange (LE) requested to be Active. 128=none. |
Integer32 | .1.3.6.1.4.1.164.3.1.6.6.3.1.1.1.4 |
||||||||||||||||||||||||
|
v51MlProtocolState
Protocol State of the ML Active Variant.
- sysStartUp - an Establish request arrived to the V5.1 interface. - waitForVarId - the variant and the Interface Id were requested during the system start-up… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.6.3.1.1.1.5 |
||||||||||||||||||||||||
|
v51MlUserActiveVarReq
User Request to turn a certain Variant of the ML, to Active.
This object specifies the Variant Id. requested by user to be Active. User's request is not always accepted. |
Integer32r/w Constraints: range: 0-899 |
.1.3.6.1.4.1.164.3.1.6.6.3.1.1.1.6 |
||||||||||||||||||||||||
|
v51MlDeleteVarReq
For V5.1: User Request to Delete a certain Variant of the ML.
For V5.2: User Request to Delete a certain Variant This object specifies the Variant Id. requested by user to be Delete. User's request will not be accepted … |
Integer32r/w Constraints: range: 0-96 |
.1.3.6.1.4.1.164.3.1.6.6.3.1.1.1.7 |
||||||||||||||||||||||||
|
v51MlSaveVariant
User Command to Save the TmpCnfg Variant data to a certain Variant Id of
the selected ML, in Current Cnfg. The value of this object specifies the target Variant Id. The data transferred should be: - for V5.1: v51… |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.6.3.1.1.1.8 |
||||||||||||||||||||||||
|
v51MlReadVariant
User Command to Read data from a certain Variant Id of the selected ML,
(in Current Cnfg) to the TmpCnfg. The value of this object specifies the source Variant Id. The data transferred should be: - for V5.1: v51Va… |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.6.3.1.1.1.9 |
||||||||||||||||||||||||
|
v51MlDeactivateVar
User Request to Deactivate a certain Variant of the ML.
This object specifies the Variant Id. requested by user to be Deactivated. User can deactivate a variant having Active Request status or Active status. Deactivatin… |
Integer32r/w | .1.3.6.1.4.1.164.3.1.6.6.3.1.1.1.10 |
v51MlCnfgTable
table.1.3.6.1.4.1.164.3.1.6.6.3.2.1
·
1 row entry
·
9 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry.
An entry in table v51MlCnfgTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
v51MlCnfgIdx
This attribute indicates the Idx of the Cnfg being accessed.
1..10 = Current Cnfg (data will be the same for all Current Configurations) 255 = TmpCnfg. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.6.3.2.1.1.1 |
||||||||
|
v51MlCnfgSltIdx
Slot Index.
For V5.2 this index will be notApplicable(255). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.6.3.2.1.1.2 |
||||||||
|
v51MlCnfgPrtIdx
This attribute indicates a unique port number of the ML having
V5 interface. Valid values: exPrt1 (1)..exPrt4 (4), inPrt1(101)..inPrt4(104) NA=255 (for V5.2 only). |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.6.3.2.1.1.3 |
||||||||
|
v51MlCnfgIfId
V5.1 Interface Id.
|
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.6.3.2.1.1.4 |
||||||||
|
v51MlCnfgStartupMode
Startup Mode.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.6.3.2.1.1.5 |
||||||||
|
v51MlCnfgReprovision
Reprovision Support.
- no : no reprovision support (=default) - yes: reprovision is supported. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.6.3.2.1.1.6 |
||||||||
|
v51MlCnfgUnblockIoPorts
Unblock IO Ports on Startup.
- disabled - disable sending Unblock request on restart - enabled - request unblock of all IO ports ON RESTART (=default). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.6.3.2.1.1.7 |
||||||||
|
v51MlCnfgRestartComplete
Send Restart Complete.
- uponLeRestart - after receiving restart from the other side. - uponPstnProtocolAck - after receiving restart ack from PSTN protocol (=default). |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.6.3.2.1.1.8 |
||||||||
|
v51MlCnfgV52Application
The V5.2 Application of the Mux.
notApplicable - for Agents that don't support this object. none - V5.2 is not used in the Mux. endPoint - this V5.2 Application transfers voice of Analog Voice … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.6.3.2.1.1.9 |
v51IoCnfgTable
table.1.3.6.1.4.1.164.3.1.6.6.4.1
·
1 row entry
·
6 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry.
An entry in table v51IoCnfgTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
v51IoCnfgIdx
This attribute indicates the Idx of the Cnfg being accessed.
1..10 = Current Cnfg (data will be the same for all Current Configurations) 255 = TmpCnfg. |
Integer32 | .1.3.6.1.4.1.164.3.1.6.6.4.1.1.1 |
||||
|
v51IoCnfgSltIdx
Slot Index
|
Enumeration | .1.3.6.1.4.1.164.3.1.6.6.4.1.1.2 |
||||
|
v51IoCnfgPrtIdx
This attribute indicates a unique port number of the Io having
V5 interface. Valid values: exPrt1 (1)..exPrt16 (16) |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.6.4.1.1.3 |
||||
|
v51IoCnfgSType
This object indicates if S Type Signaling will be used by this ISDN port
(yes/no). notApplicable - for PSTN ports. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.6.4.1.1.4 |
||||
|
v51IoCnfgFType
This object indicates if F Type Signaling will be used by this ISDN port
(yes/no). notApplicable - for PSTN ports. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.6.4.1.1.5 |
||||
|
v51IoCnfgPType
This object indicates if P Type Signaling will be used by this ISDN port
(yes/no). notApplicable - for PSTN ports. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.6.4.1.1.6 |
ip2IfTable
table.1.3.6.1.4.1.164.3.1.6.7.1
·
1 row entry
·
93 columns
Channels Configuration Table.
Application layer configuration per link
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ip2IfChannelIndex
The channel index, which is actualy the bundle ID.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.7.1.1.1 |
||||||||||||||||||
|
ip2IfRowStatus
This parameter allows NMS to create/delete entries of this table.
|
SNMPv2-TCRowStatusr/w Enumerated Values:
Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.3.1.6.7.1.1.2 |
||||||||||||||||||
|
ip2IfOperStatus
The actual link status.
remoteFail - No Rx. localFail - No Tx. unavailable - No echo replay or replay with invalid code or when connection is in Test state. valiodationFail - Connection is in not valid state. standby -… |
Enumeration | .1.3.6.1.4.1.164.3.1.6.7.1.1.3 |
||||||||||||||||||
|
ip2IfAdminStatus
The desired state of the link.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.7.1.1.4 |
||||||||||||||||||
|
ip2IfDestAddr
The destination IP address.
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.3.1.6.7.1.1.5 |
||||||||||||||||||
|
ip2IfNextHop
The next hop to which the frame should be sent.
Default value - 0.0.0.0. Upon setting the default value the frame is sent to the default Gateway. |
RFC1155-SMIIpAddressr/w | .1.3.6.1.4.1.164.3.1.6.7.1.1.6 |
||||||||||||||||||
|
ip2IfDestPort
The destination Bundle at the far-end device.
|
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.7.1.1.7 |
||||||||||||||||||
|
ip2IfMacAddr
The Destination MAC address of the next hop or
destination station. |
MacAddressr/w Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.3.1.6.7.1.1.8 |
||||||||||||||||||
|
ip2IfJitterBuffer
The maximum cell arrival jitter in 10 usec that the
reassembly process will tolerate in the cell stream, without producing errors on the CBR service interface. For KM2100: KML.11 - The range that w… |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.7.1.1.9 |
||||||||||||||||||
|
ip2IfTos
The TOS (Type of Service) value: 0..255.
In Vmux-2100/110 devices versions 3.1 and up, in Vmux-210 and in Vmux-4x0: LSB 8 bits - 00 00 00 XX will be used for Signaling packets TOS. N… |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.7.1.1.10 |
||||||||||||||||||
|
ip2IfTDMBytesInFrame
The number of TDM bytes to be placed in a single IP
frame payload. For ip2IfTDMoIpMode = cesOverPsn this parameter indicates the number of IP frames, calculated as: 1440/<Number of Timeslots>. |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.7.1.1.11 |
||||||||||||||||||
|
ip2IfVlanSupport
VLAN support (Tagging).
no - No support to VLAN. yes - 4 VLAN bytes will be added to the frame. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.7.1.1.12 |
||||||||||||||||||
|
ip2IfVlanIdentifier
VLAN ID.
|
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.7.1.1.13 |
||||||||||||||||||
|
ip2IfVlanFramePriority
VLAN Frame priority.
|
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.7.1.1.14 |
||||||||||||||||||
|
ip2IfExitPort
This object determines to which external port the traffic
will be sent. auto - the device will decide automatically the exit port. If there is an option for Tx via more than one ETH card then use ext1 (1) and ext2(2) f… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.7.1.1.15 |
||||||||||||||||||
|
ip2IfVoiceOos
Voice Out-Of-Service code. Valid range: (0 - FF HEX).
For agents that do not support this feature, the value will always be 0. |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.7.1.1.16 |
||||||||||||||||||
|
ip2IfDataOos
Data Out-Of-Service code. Valid range: (0 - FF HEX).
For agents that do not support this feature, the value will always be 0. |
OctetStringr/w | .1.3.6.1.4.1.164.3.1.6.7.1.1.17 |
||||||||||||||||||
|
ip2IfBundleUsage
The Bundle Resource usage in Kbps.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.7.1.1.18 |
||||||||||||||||||
|
ip2IfOAM
This parameter determine the OAM configuration.
The LSB (Bit 0 the most right one) is used for OAM connectivity. Values: 0 = disable, 1= enable. |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.7.1.1.19 |
||||||||||||||||||
|
ip2IfTDMoIpMode
The TDMoIP Mode configuration. Static- means TS can Tx any time.
dynamicLES - means TS can Tx only when line is enabled according to LES protocol. dynamicCAS - means TS can Tx only when line is enabled according to CAS … |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.7.1.1.20 |
||||||||||||||||||
|
ip2IfTimeElapsed
The number of seconds that have elapsed since
the beginning of the current error-measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maxim… |
Integer32 | .1.3.6.1.4.1.164.3.1.6.7.1.1.21 |
||||||||||||||||||
|
ip2IfValidIntervals
The number of previous intervals for which data was collected.
The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute in… |
Integer32 | .1.3.6.1.4.1.164.3.1.6.7.1.1.22 |
||||||||||||||||||
|
ip2IfFarEndType
This object defines the type of the Far-End device.
This data is important for signaling and DS0 format. For Vmux: e1 (2) value is used for a PBX in the Far End. fxs (5) is used for Phone. … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.7.1.1.23 |
||||||||||||||||||
|
ip2IfRdnState
This object defines the role this bundle plays in the redundancy scheme:
none(2) - means this bundle is not part of redundancy pair. primary/ secondary - means this bundle is not part of redundancy pair, and that is the… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.7.1.1.24 |
||||||||||||||||||
|
ip2IfSourceAddr
Source IP Address of the bundle.
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.3.1.6.7.1.1.25 |
||||||||||||||||||
|
ip2IfBandWidth
Defines the Bandwidth of the bundle.
For TDM bundles - it is the Number of Time Slots in The Bundle. - For T1 the value will be: 1..24 - For E1 the value will be: 1..31 - For T3 the value will be: 1..84 … |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.7.1.1.26 |
||||||||||||||||||
|
ip2IfMeasuredSilence
This object shows the percentage of Silence that was measured by the device
for the current bundle in the transmitted payload. Relevant values: 0..100, 255. Default value is 50. 0 means that there is no silence on the l… |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.7.1.1.27 |
||||||||||||||||||
|
ip2IfPayloadType
This object defines the TDMoIP payload type.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.7.1.1.28 |
||||||||||||||||||
|
ip2IfProtocolVersion
This object defines the TDMoIP protocol Version.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.7.1.1.29 |
||||||||||||||||||
|
ip2IfTdmBackUpNextHop
Defines the TDM bundle default router in case there was a switch from the Primary Link
(for example an ETH port) to a TDM backup Link like E1, T1 or Serial Link. This parameter is relevant only when a Backup Link is con… |
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.3.1.6.7.1.1.30 |
||||||||||||||||||
|
ip2IfOosTxEnable
This object defines whether OOS will be Transmitted.
Note that for IPmux1000 the Lbit is always sent, but the OOS will be sent according to user selection in this parameter. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.7.1.1.31 |
||||||||||||||||||
|
ip2IfConnCheckPktFrequency
Time in sec. between 2 Bundle Connectivity Check packets.
Valid values: 0..60. 0 = Not Applicable. |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.7.1.1.32 |
||||||||||||||||||
|
ip2IfConnPktTimeOutCycles
No. of cycles the agent will send Bundle Connectivity packets without receiving
a response from the remote device before declaring that the bundle connection to the remote side is down - Time Out. Valid values: 0..5. 0 … |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.7.1.1.33 |
||||||||||||||||||
|
ip2IfMfRelay
Multi Frequency Signaling Detection.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.7.1.1.34 |
||||||||||||||||||
|
ip2IfTxGain
Transmit gain in dBm.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.7.1.1.35 |
||||||||||||||||||
|
ip2IfSuperTandem
The Super Tandem feature provides end to end compression over multiple hops,
solving the double compression problem detected in Voice compressing systems. The Super Tandem allows transmission of compressed voice between… |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.7.1.1.36 |
||||||||||||||||||
|
ip2IfSrcPort
The source Bundle at the local device,
this parameter used for cases where there is no match between ip2IfChannelIndex and the Source Bundle ID. |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.7.1.1.37 |
||||||||||||||||||
|
ip2IfModemCalls
This MIB object shows whether Modem Calls are enabled via the bundle.
relay option (3) means that the bundle will send to the network only modulated data. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.7.1.1.38 |
||||||||||||||||||
|
ip2IfMinPulseWidth
Indicates the minimum width in milliseconds of the MF (Multi Frequency)
tone transmitted by the switch. Valid values: 45-300 msec. notApplicable=0. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.7.1.1.39 |
||||||||||||||||||
|
ip2IfMinPowerLevel
Indicates the minimum power level in dBm of the MF (Multi Frequency)
tone transmitted by the switch. Valid values: -1...-35 dBm. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.7.1.1.40 |
||||||||||||||||||
|
ip2IfEchoCanceler
Echo canceler activation.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.7.1.1.41 |
||||||||||||||||||
|
ip2IfCodingLaw
This attribute indicates the Method/Law for decoding/encoding the voice
information. aLaw(1) is the standard Law for E1 links. uLaw(2) is the standard Law for T1 links. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.7.1.1.42 |
||||||||||||||||||
|
ip2IfCustomToneDetect
Custom Tone Detection (COT) is a Control operation of a 2Khz tone detector.
This tone is sent between PBX devices in order to check that the line status is OK. When the COT is enabled the device will not compress/decomp… |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.7.1.1.43 |
||||||||||||||||||
|
ip2IfCallerIdDelay
Time in msec between CLID (Caller ID) signal detection on the line and CLID
signal transmission. The CLID must be sent between ringing signals and the value of the delay is used for synchronizing the CLID transmission w… |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.7.1.1.44 |
||||||||||||||||||
|
ip2IfConnectivityMode
This MIB object shows whether to send Pings or OAM frames over the bundle.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.7.1.1.45 |
||||||||||||||||||
|
ip2IfClockSourceEnable
This MIB object defines whether this bundle can be a clock source.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.7.1.1.46 |
||||||||||||||||||
|
ip2IfNetworkType
This MIB object defines the network over which the
Bundle PSN (Packet Switching Network)is transported. In Gmux2000: ipComprHeader indicates proprietary compressed IP header packets. mplsComprHeader indicates proprieta… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.7.1.1.47 |
||||||||||||||||||
|
ip2IfMplsRxLabelEnable
This MIB object defines whether there is user defined
inner (Rx.) label for this Bundle. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.7.1.1.48 |
||||||||||||||||||
|
ip2IfMplsRxLabel
This MIB object defines the MPLS Rx. Label for this Bundle.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.7.1.1.49 |
||||||||||||||||||
|
ip2IfMplsTxLabelEnable
This MIB object defines whether there is user defined
outer (Tx.) label for this Bundle. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.7.1.1.50 |
||||||||||||||||||
|
ip2IfMplsTxLabel
This MIB object defines the MPLS Tx. Label for this Bundle.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.7.1.1.51 |
||||||||||||||||||
|
ip2IfMplsTxExpBits
The MPLS Network priority (EXP bits) used for this bundle.
|
Integer32r/w | .1.3.6.1.4.1.164.3.1.6.7.1.1.52 |
||||||||||||||||||
|
ip2IfMfcSpoofing
This MIB object defines whether the MFC (Multi Frequency Compelled) protocol
spoofing will exist in the bundle. When the MFC Spoofing is used, the Local and Remote PBXs will send MFC Signaling to each other. The Vmuxes … |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.7.1.1.53 |
||||||||||||||||||
|
ip2IfToneAckInterval
Time Interval in milli seconds from the time a Vmux sends tone/s to a local PBX until
it receives an acknowledgement from this PBX. Valid values: 60...400 in steps of 20. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.7.1.1.54 |
||||||||||||||||||
|
ip2IfNextHopType
This MIB object defines the Bundle next Hop Address Type.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.7.1.1.55 |
||||||||||||||||||
|
ip2IfNoiseLevelForVAD
This object defines the Level of Noise on the line,
the Voice Activation Detector (VAD) will have to handle. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.7.1.1.56 |
||||||||||||||||||
|
ip2IfClockPreferences
The Clock preferences:
accurateness (2) = Accurate clock is more important than Constant Delay. constantDelay (3)= Constant Delay is more important than Accurate clock . |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.7.1.1.57 |
||||||||||||||||||
|
ip2IfConnectionMode
The Connection Mode:
tdmOIpCe (2) = TDMOiP (CE) = Circuit Emulation. tdmOIpCv (3)= TDMOiP (CV) = Compressed Voice. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.7.1.1.58 |
||||||||||||||||||
|
ip2IfRingBack
Enables or disable Ring Back.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.7.1.1.59 |
||||||||||||||||||
|
ip2IfReversePolarity
Enables or disable Reverse polarity synthesis.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.7.1.1.60 |
||||||||||||||||||
|
ip2IfPulseMeter
Enables or disable Pulse metering synthesis.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.7.1.1.61 |
||||||||||||||||||
|
ip2IfPulseMeterFreq
Frequency of synthesized pulse metering for this bundle.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.7.1.1.62 |
||||||||||||||||||
|
ip2IfPulseMeterPeriod
Duration of synthesized pulse metering. current values are: 100-250.
|
SNMPv2-SMIInteger32r/w Constraints: range: 1-6Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.7.1.1.63 |
||||||||||||||||||
|
ip2IfOnHookDetect
Enables or disable immediate reaction to On-Hook bits from network in Ringing.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.7.1.1.64 |
||||||||||||||||||
|
ip2IfComfortNoiseGen
Enable or disable Comfort Noise Generation (CNG).
When this parameter is enabled and no voice payload exists on the line for some time period during the call (moments of silence), the device will generate a soft back… |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.7.1.1.65 |
||||||||||||||||||
|
ip2IfExitChannel
The channelized bundle that the voice bundle exits through.
In Gmux2000 it is the ifIndex of the Channelized Bundle (sub-channel) that the Voice Bundle exits through. The ifIndex contains the Slot+Prt+Channelized Bund… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.7.1.1.66 |
||||||||||||||||||
|
ip2IfMaxVBDModemCalls
Maximum VBD modem calls for this bundle.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.7.1.1.67 |
||||||||||||||||||
|
ip2IfMaxRelayModemCalls
Maximum Relay modem calls for this bundle.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.7.1.1.68 |
||||||||||||||||||
|
ip2IfCustomToneFrequency
This is the frequency of the Custom Tone that is sent between PBXs in order
to check that the line status is OK. When the Custom Tone Detection is enabled the device will not compress/decompress this tone. The custom to… |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.7.1.1.69 |
||||||||||||||||||
|
ip2IfVadMethod
Voice Activity Detection (VAD) method.
proprietary (2) - non standard VAD based only on power measurement. It is very sensitive to background noise. internalITUT (3) - standard ITU-T VAD. It is … |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.7.1.1.70 |
||||||||||||||||||
|
ip2IfRxGain
Receive gain in dBm.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.7.1.1.71 |
||||||||||||||||||
|
ip2IfCallerIDType
Caller ID Type used by the DSP for this bundle.
Bellcore type is used by the American method. V.23 type is used by the European method. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.7.1.1.72 |
||||||||||||||||||
|
ip2IfPeerAddrType
This MIB object defines the peer Address Type.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.7.1.1.73 |
||||||||||||||||||
|
ip2IfVbdRate
Voice Band Data (VBD) rate for this bundle.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.7.1.1.74 |
||||||||||||||||||
|
ip2IfDtmfDetection
Enable/Disable DTMF (Dual Tone Multi Frequency) detectors for this bundle.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.7.1.1.75 |
||||||||||||||||||
|
ip2IfNlpCutoffLevel
Non Linear Processor (NLP) Cutoff Level for this bundle.
This parameter is used by the echo canceller. It is the maximum absolute linear PCM amplitude of the near-end signal that will cause the NLP module to be active a… |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.1.1.76 |
||||||||||||||||||
|
ip2IfDtdErlRatioCutoffQ3
The DTD ERL cutoff level is used in order to determine whether the near-end is talking
or not. This parameter is used by the echo canceller when echo exists and there is voice with low volume on the line. DTD means Doub… |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.1.1.77 |
||||||||||||||||||
|
ip2IfCASRedundancy
Enable/Disable CAS signaling redundancy.
This parameter is useful when there are problems with the network and applicable only for CAS signaling: E1-MF (G.732S) or E1-CRC-MF (G.732SCRC ). enable (3) - mea… |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.7.1.1.78 |
||||||||||||||||||
|
ip2IfBundleSensitivity
Denotes if the bundle is sensitive to delay in the network,
or is sensitive to data errors in the network. Voice bundles are sensitive to delay; Non-voice bundles are sensitive to data errors. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.7.1.1.79 |
||||||||||||||||||
|
ip2IfOAMBundleIdent
Denotes if an OAM bundle is identified according to the Bundle Number (0x3fff),
or according to the value of the first nibble in the VCCV control word sent in the frame. controlWord - applicable only when ip2IfProtoco… |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.7.1.1.80 |
||||||||||||||||||
|
ip2IfMaxTxQueue
Max Tx Queue buffer size, measured in msec (milliseconds).
Low buffer size may cause the buffer to overflow and discard packets in case of burst of packets on the network. High buffer size … |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.1.1.81 |
||||||||||||||||||
|
ip2IfMaxGprsTxQueue
Max GPRS Tx Queue buffer size, measured in msec (milliseconds).
Low buffer size may cause the buffer to overflow and discard packets in case of burst of packets on the network. High … |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.1.1.82 |
||||||||||||||||||
|
ip2IfV23HD
This parameter shows whether V.23 Half Duplex Modem Protocol is enabled
on the bundle. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.7.1.1.83 |
||||||||||||||||||
|
ip2IfModemProtocolMode
This octet string contains the mode of each Modem Protocol used on the bundle.
For each protocol one octet will be used. Octet #1 will be used for V.22 Protocol. Octet #2, #3, #4... are reserved for futu… |
OctetStringr/w | .1.3.6.1.4.1.164.3.1.6.7.1.1.84 |
||||||||||||||||||
|
ip2IfCdisCngDetectionTime
When working with CDIS (Call DIScrimination method) or CNG (Comfort Noise Generation):
The time in msec that the device will detect 1100Hz & 2100Hz signals on the line before switching to modem or fax. For Vmux: the val… |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.1.1.85 |
||||||||||||||||||
|
ip2IfSuperTandemBitMask
This MIB object enables controlling the Time Slot/Channel rate.
Valid values: 1 - FF HEX Each BIT represents 1/8 of the TS. Example: 7E (0111 1110) means that 6/8 of the TS (the center ones) are masked and data will be … |
OctetStringr/w | .1.3.6.1.4.1.164.3.1.6.7.1.1.86 |
||||||||||||||||||
|
ip2IfVbdSwitchbackTime
Time in msec required for the DSP to switch back from VBD (Voice Band Data) to Voice.
For Vmux: the values will be in steps of 30 msec. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.1.1.87 |
||||||||||||||||||
|
ip2IfCallerIdTxGain
The gain value in dBm units used for transmitting the Caller ID signal on the bundle.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.7.1.1.88 |
||||||||||||||||||
|
ip2IfCallerIdRxGain
The gain value in dBm units of the Caller ID signal received on the bundle.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.7.1.1.89 |
||||||||||||||||||
|
ip2IfUdpMuxMethod
This parameter determines according to which field the multiplexing is made:
srcPort (2) - multiplexing according to the UDP Source Port (Dest=0x085e). This should be the default value, for backwards compatibility.… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.7.1.1.90 |
||||||||||||||||||
|
ip2IfCallerIdDetection
Enable/Disable Caller ID Detection for this bundle.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.7.1.1.91 |
||||||||||||||||||
|
ip2IfWap
Enable/Disable WAP (Wireless Application Protocol) for this bundle.
WAP allows users to access the internet from wireless devices. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.7.1.1.92 |
||||||||||||||||||
|
ip2IfSignalingOos
Out of Service code sent on signaling TimeSlot.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.7.1.1.93 |
ip2IfStatTable
table.1.3.6.1.4.1.164.3.1.6.7.7
·
1 row entry
·
36 columns
Channels (Bundles) Statistics Table.
IP Statistics per bundle
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ip2IfStatChIndex
The channel index, which is actualy the bundle ID.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.7.7.1.1 |
||||||||||||||||
|
ip2IfStatSeqErrors
Number of events that the sequence number of an incoming Frame
causes a transition from the 'sync' state to the 'out of sequence' state. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.7.7.1.2 |
||||||||||||||||
|
ip2IfStatBufUnderflows
Number of events that the buffer underflows. This records the count of the
number of events the Receive (Eth to TDM) buffer underflows. In the case of a continuous underflow caused by a loss of Frame flow, a single buff… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.7.7.1.3 |
||||||||||||||||
|
ip2IfStatBufOverflows
Number of events that the buffer overflows. This records the count of the
number of events the Receive (Eth to TDM) buffer overflows. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.7.7.1.4 |
||||||||||||||||
|
ip2IfStatTxOnTimeInterval
Number of frames that were transmitted due to time interval elapse.
The user can choose to Tx the Frame when it reaches the Max size or when the packetizing time interval elapses. The packetizing time interval is the in… |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.7.1.5 |
||||||||||||||||
|
ip2IfStatTxOnMaxSize
Number of frames that were transmitted due to reaching max.
frame size. The user can choose to Tx the Frame when it reaches the Max size or when the packetizing time interval elapses. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.7.1.6 |
||||||||||||||||
|
ip2IfStatRxSignaling
Number of signaling frames that were received.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.7.1.7 |
||||||||||||||||
|
ip2IfStatRxVoice
Number of voice frames that were received.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.7.1.8 |
||||||||||||||||
|
ip2IfStatRxHdlc
Number of HDLC frames that were received.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.7.1.9 |
||||||||||||||||
|
ip2IfStatTxSignaling
Number of signaling frames that were transmitted.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.7.1.10 |
||||||||||||||||
|
ip2IfStatTxVoice
Number of voice frames that were transmitted.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.7.1.11 |
||||||||||||||||
|
ip2IfStatTxHdlc
Number of HDLC frames that were transmitted.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.7.1.12 |
||||||||||||||||
|
ip2IfStatRdnFlip
Number of redundancy flips occured.
This parameter counts only flips from this bundle to the other bundle in the redundancy couple. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.7.1.13 |
||||||||||||||||
|
ip2IfFarEndTdmStatus
This variable indicates the Status of the Far-End TDM Line.
It contains failure state information. The variable is a bit map represented as a sum, therefore, it can represent multiple failures simultaneously. The … |
Integer32 | .1.3.6.1.4.1.164.3.1.6.7.7.1.14 |
||||||||||||||||
|
ip2IfStatPsnTxFrames
Number of frames that were transmitted to PSN.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.7.1.15 |
||||||||||||||||
|
ip2IfStatPsnRxFrames
Number of frames that were recieved from PSN.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.7.1.16 |
||||||||||||||||
|
ip2IfStatMinJittBufLevel
The Minimum jitter buffer level (in msec).
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.7.1.17 |
||||||||||||||||
|
ip2IfStatMaxJittBufLevel
The Maximum jitter buffer level (in msec).
|
SNMPv2-SMIUnsigned32 Constraints: range: 1-255Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.7.1.18 |
||||||||||||||||
|
ip2IfStatRecommendedJittBufSize
The Recommended jitter buffer Size (in msec).
0= not applicable. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.7.1.19 |
||||||||||||||||
|
ip2IfStatPsnSeqErrors
Number of times that the sequence number of an incoming Frame
indicates Loss of Frame or Out of order occured in PSN. |
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.7.1.20 |
||||||||||||||||
|
ip2IfStatPsnReorderFrames
Number of times that Frames had been reordered in PSN.
|
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.7.1.21 |
||||||||||||||||
|
ip2IfStatMinRoundTripDelay
The minimum Round Trip delay (in msec).
0= not applicable. |
SNMPv2-SMIUnsigned32 Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.7.1.22 |
||||||||||||||||
|
ip2IfStatMaxRoundTripDelay
The maximum Round Trip delay (in msec).
0= not applicable. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.7.1.23 |
||||||||||||||||
|
ip2IfStatAvrRoundTripDelay
The avarage Round Trip delay (in msec).
0= not applicable. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.7.1.24 |
||||||||||||||||
|
ip2IfStatFrameTrackDupDrop
The number of packets dropped due to being duplicated.
(duplicated packet means a packet that has the same sequential number as a packet being received previously). |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.7.1.25 |
||||||||||||||||
|
ip2IfStatFrameTrackMissing
The number of packets that are missing.
(Missing packet means an expected packet- according to the current sequential number - that was not received). |
SNMPv2-SMICounter32 Constraints: range: 0-899Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.7.1.26 |
||||||||||||||||
|
ip2IfStatFrameTrackLongSerMiss
The longest series of consecutive missing sequential numbers.
Missing sequential numbers represent missing packets that was expected to be received successively. |
SNMPv2-SMIInteger32 Constraints: range: 0-96Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.7.7.1.27 |
||||||||||||||||
|
ip2IfStatTxMeasuredSilence
This object shows the percentage of Silence that was measured by the device
for the current bundle in the transmitted payload. Relevant values: 0..100, 255. Default value is 50. 0 means that there is no silence on the l… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.7.7.1.28 |
||||||||||||||||
|
ip2IfStatRxMeasuredSilence
This object shows the percentage of Silence that was measured by the device
for the current bundle in the received payload. Relevant values: 0..100, 255. Default value is 50. 0 means that there is no silence on the line… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.7.7.1.29 |
||||||||||||||||
|
ip2IfStatHdlcCrcErr
This counter indicates the number of received HDLC frames
with CRC errors. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.7.1.30 |
||||||||||||||||
|
ip2IfStatHdlcAlignErr
This counter indicates the number of received HDLC frames
with alignment errors. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.7.1.31 |
||||||||||||||||
|
ip2IfStatHdlcOversize
This counter indicates the number of received HDLC frames
longer than 1470. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.7.1.32 |
||||||||||||||||
|
ip2IfStatHdlcUndersize
This counter indicates the number of received HDLC frames
shorter than 4. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.7.1.33 |
||||||||||||||||
|
ip2IfStatHdlcAbort
This counter indicates the number of received HDLC frames
with abort indication. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.7.1.34 |
||||||||||||||||
|
ip2IfStatRxCorrectFrames
Number of received correct frames.
|
SNMPv2-SMICounter32 Constraints: range: 4-4Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.7.1.35 |
||||||||||||||||
|
ip2IfStatHdlcErroredFrames
Number of received errored HDLC frames.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.7.1.36 |
ip2IfPortTable
table.1.3.6.1.4.1.164.3.1.6.7.9
·
1 row entry
·
4 columns
Port Table.
Application layer configuration per Port
Indexes
IF-MIBifIndex prtPhyIntervalNumber
| Column | Syntax | OID |
|---|---|---|
|
ip2IfPortIndex
The Port index, which is actualy the ifIndex.
|
SNMPv2-SMIInteger32 Constraints: range: 1-96Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.7.9.1.1 |
|
ip2IfPortUsage
This parameter indicates the usage of the port (percents).
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.7.9.1.2 |
|
ip2IfPortMask
This parameter defines whether Agent will mask port's alarms and statistics or not.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.7.9.1.3 |
|
ip2IfPortTotalThroughput
This parameter indicates the total Throughput of the port in bps.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.7.9.1.4 |
ip2IfCurrentStatTable
table.1.3.6.1.4.1.164.3.1.6.7.10
·
1 row entry
·
7 columns
Channels (Bundles) Current Statistics Table.
IP Current Statistics per bundle
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
ip2IfCurrentStatSeqErrors
Number of seconds that the sequence number of an incoming Frame
causes a transition from the 'sync' state to the 'out of sequence' state in the current interval. |
SNMPv2-SMICounter32 Constraints: range: 4-4Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.10.1.1 |
||||
|
ip2IfCurrentStatBufUnderflows
Number of seconds that the buffer underflows in the current interval.
This records the count of the number of seconds the Receive (Eth to TDM) buffer underflows in the current interval. In the case of a continuous und… |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.10.1.2 |
||||
|
ip2IfCurrentStatBufOverflows
Number of seconds that the buffer overflows in the current interval.
This records the count of the number of seonds the Receive (Eth to TDM) buffer overflows in the current interval. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.10.1.3 |
||||
|
ip2IfCurrentStatMaxDelayVar
The maximum deviation from the center of the buffer (in msec) for the current interval.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.7.10.1.4 |
||||
|
ip2IfCurrentStatMinJittBufLevel
The Minimum jitter buffer level (in msec) for the current interval.
|
SNMPv2-SMIUnsigned32 Constraints: range: 1-255Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.10.1.5 |
||||
|
ip2IfCurrentStatMaxJittBufLevel
The Maximum jitter buffer level (in msec) for the current interval.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.10.1.6 |
||||
|
ip2IfCurrentStatTxErrFrameSec
The number of seconds in which errored frames were transmitted during the current interval.
The error may be one of the following: CRC error, Alignment error, Oversized frame, Undersized frame, Aborted frame. |
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.10.1.7 |
ip2IfIntervalStatTable
table.1.3.6.1.4.1.164.3.1.6.7.11
·
1 row entry
·
8 columns
Channels (Bundles) Interval Statistics Table.
IP Interval Statistics per bundle
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
ip2IfIntervalStatIndex
The Interval index, which is actualy the Interval number.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.7.11.1.1 |
||||||||
|
ip2IfIntervalStatSeqErrors
Number of seconds that the sequence number of an incoming Frame
causes a transition from the 'sync' state to the 'out of sequence' state in the selected interval. |
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.11.1.2 |
||||||||
|
ip2IfIntervalStatBufUnderflows
Number of seconds that the buffer underflows in the selected interval.
This records the count of the number of seconds the Receive (Eth to TDM) buffer underflows in the selected interval. In the case of a continuous u… |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.11.1.3 |
||||||||
|
ip2IfIntervalStatBufOverflows
Number of seconds that the buffer overflows in the selected interval.
This records the count of the number of seconds the Receive (Eth to TDM) buffer overflows in the selected interval. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.11.1.4 |
||||||||
|
ip2IfIntervalStatMaxDelayVar
The maximum size of the buffer (in 10's of usec) in the selected interval.
For some devices (e.g. MP-4100) units are usec. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.7.11.1.5 |
||||||||
|
ip2IfIntervalStatMinJittBufLevel
The Minimum jitter buffer level (in msec) for the selected interval.
For some devices (e.g. MP-4100) units are usec. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.11.1.6 |
||||||||
|
ip2IfIntervalStatMaxJittBufLevel
The Maximum jitter buffer level (in msec) for the selected interval.
For some devices (e.g. MP-4100) units are usec. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.11.1.7 |
||||||||
|
ip2IfIntervalStatTxErrFrameSec
The number of seconds in which errored frames were transmitted during the selected interval.
The error may be one of the following: CRC error, Alignment error, Oversized frame, Undersized frame, Aborted frame. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.7.11.1.8 |
prtBdbandIndTable
table.1.3.6.1.4.1.164.3.1.6.8.1.1
·
1 row entry
·
6 columns
The Indication Signal table.
An entry in the Indication Signal table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtBdbandCnfgIdx
This object indicates the Idx of the Agent Cnfg the following
objects refer. 255=Temporary Cnfg (when relevant, Set is done only to this configuration). For Agents that support only one configuration, this object will … |
Integer32 | .1.3.6.1.4.1.164.3.1.6.8.1.1.1.1 |
||||||||||||
|
prtBdbandIdx
This object indicates a unique port or interface number.
For numbering, see product's spec. For some products, the numbering can equal ifIndex. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.8.1.1.1.2 |
||||||||||||
|
prtBdbandIndSig
This object indicates a unique Indication Signal.
ais(1) = AIS = Alarm Indication Signal. rdi(2) = RDI = Remote Defect Indication. |
Enumeration | .1.3.6.1.4.1.164.3.1.6.8.1.1.1.3 |
||||||||||||
|
prtBdbandIndEvent
This object indicates a unique Event that can cause the Indication Signal.
slm(2) = SLM = Signal Label Mismatch eed(4) = EED = Excessive Error Defect pathTrace(5) = the end-to-end source/destination of information is wr… |
Enumeration | .1.3.6.1.4.1.164.3.1.6.8.1.1.1.4 |
||||||||||||
|
prtBdbandIndSigEnable
This object allows user to define if the event specified by prtBdbandIndEvent
will cause creation of the Indication Signal specified by prtBdbandIndSig or not. disable - will not enable causing the signal enable - wil… |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.8.1.1.1.5 |
||||||||||||
|
prtBdbandRowStatus
Creation/Deletion of rows in the table.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.3.1.6.8.1.1.1.6 |
prtPhyConfigTable
table.1.3.6.1.4.1.164.3.1.6.8.1.2
·
1 row entry
·
2 columns
The Phy Config table. Used now for Phy25.6 Mbps.
An entry in the Phy Config table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
prtPhyTimeElapsed
The number of seconds that have elapsed since
the beginning of the current error-measurement period. |
Integer32 | .1.3.6.1.4.1.164.3.1.6.8.1.2.1.1 |
|
prtPhyValidIntervals
The number of previous intervals for which valid data was collected.
The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 mi… |
Integer32 | .1.3.6.1.4.1.164.3.1.6.8.1.2.1.2 |
prtPhyCurrentTable
table.1.3.6.1.4.1.164.3.1.6.8.2.1
·
1 row entry
·
7 columns
The 25.6 Mbps Section/Line Current table.
An entry in the 25.6 Mbps Line Current table.
ifIndex of the line 25.6 Mbps layer of type
25.6 Mbps.
ifIndex of the line 25.6 Mbps layer of type
25.6 Mbps.
Indexes
r2TsCnfgIdx r2TsProfileIdx r2TsIdx
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
prtPhyCurrentLOS
The counter associated with the number of Loss Of Sync
seconds, encountered by a 25.6 Mbps interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Constraints: range: 1-255Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.8.2.1.1.1 |
||||||
|
prtPhyCurrentLSV
The counter associated with the number of Line symbol violation
seconds, encountered by a 25.6 Mbps interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.8.2.1.1.2 |
||||||
|
prtPhyCurrentUAS
The counter associated with the number of UAS
encountered by a 25.6 Mbps interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.8.2.1.1.3 |
||||||
|
prtPhyCurrentSES
The counter associated with the number of SES
encountered by a 25.6 Mbps interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.8.2.1.1.4 |
||||||
|
prtPhyCurrentES
The number of Errored Seconds, encountered by a
25.6 Mbps interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.8.2.1.1.5 |
||||||
|
prtPhyCurrentStatus
The statuses of the current interval:
0 - O.K. 1 - The link has been switched by a redundancy mechanism. 2 - Module is in/out. 4 - Empty - card is out. |
OctetString | .1.3.6.1.4.1.164.3.1.6.8.2.1.1.6 |
||||||
|
prtPhyCurrentLOF
The number of Loss of Frames, encountered by an
interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.8.2.1.1.7 |
prtPhyIntervalTable
table.1.3.6.1.4.1.164.3.1.6.8.2.2
·
1 row entry
·
8 columns
The Line Interval table.
An entry in the 25.6 Mbps Line Interval table.
ifIndex of the line 25.6 Mbps layer of type 25.6 Mbps.
ifIndex of the line 25.6 Mbps layer of type 25.6 Mbps.
Indexes
r2StatusSlotIdx r2StatusPortIdx r2StatusTsIdx
| Column | Syntax | OID | ||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtPhyIntervalNumber
A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid). |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.8.2.2.1.1 |
||||||||||||||||||||||||||||
|
prtPhyIntervalLOS
The counter associated with the number of Loss Of Sync
seconds , encountered by a 25.6 Mbps interface in one of the previous 96, individual 15 minute intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.8.2.2.1.2 |
||||||||||||||||||||||||||||
|
prtPhyIntervalLSV
The counter associated with the number of line symbol violation
seconds , encountered by a 25.6 Mbps interface in one of the previous 96, individual 15 minute intervals. |
SNMPv2-SMIGauge32 Constraints: range: 1-31Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.8.2.2.1.3 |
||||||||||||||||||||||||||||
|
prtPhyIntervalUAS
The counter associated with the number of UAS
encountered by a 25.6 Mbps interface in one of the previous 96, individual 15 minute intervals. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.8.2.2.1.4 |
||||||||||||||||||||||||||||
|
prtPhyIntervalSES
The counter associated with the number of SES
encountered by a 25.6 Mbps interface in one of the previous 96, individual 15 minute intervals. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.8.2.2.1.5 |
||||||||||||||||||||||||||||
|
prtPhyIntervalES
The number of Errored Seconds, encountered by a
25.6 Mbps interface in one of the previous 96, individual 15 minute intervals. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.8.2.2.1.6 |
||||||||||||||||||||||||||||
|
prtPhyIntervalStatus
The statuses of the current interval:
0 - O.K. 1 - The link has been switched by a redundancy mechanism. 2 - Module is in/out. 4 - Empty - card is out. |
OctetString | .1.3.6.1.4.1.164.3.1.6.8.2.2.1.7 |
||||||||||||||||||||||||||||
|
prtPhyIntervalLOF
The number of Loss of Frames, encountered by an
interface in one of the previous 96, individual 15 minute intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.8.2.2.1.8 |
r2CnfgTable
table.1.3.6.1.4.1.164.3.1.6.9.1.1
·
1 row entry
·
25 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
r2CnfgIdx
This attribute indicates the Idx of the Cnfg being accessed.
255 = TmpCnfg. 1 = Current Cnfg. Write is allowed only to TmpCnfg. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.9.1.1.1.1 |
||||||||||||||||||||||||||||||||||
|
r2CnfgProfileIdx
Profile Index.
Valid values: 1..5 Only instances of profiles that are defined having agnSigProfType=r2Cas will exist in this table. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.9.1.1.1.2 |
||||||||||||||||||||||||||||||||||
|
r2Mode
R2 Mode.
auto - in this mode, default value of timers will be used by R2, according to the selected r2Country. manual - in this mode, user can change the value of R2 timers within the valid limits, s… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.9.1.1.1.3 |
||||||||||||||||||||||||||||||||||
|
r2Country
R2 Country. R2 Timers can have different range of values and
defaults for each country. When r2Mode=auto, the default value is used by R2 according to this selected country. 1=ITU-T (standard values) 2=Korea 3=Ind… |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.9.1.1.1.4 |
||||||||||||||||||||||||||||||||||
|
r2Delay
This object enables user to configure the link as satellite or terrestrial.
The seize acknowledge detect timing is much shorter (msec) for terrestrial link than for satellite link (1-2 sec). |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.9.1.1.1.5 |
||||||||||||||||||||||||||||||||||
|
r2MeteringInd
Which Bit will be used for Metering Indication.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.9.1.1.1.6 |
||||||||||||||||||||||||||||||||||
|
r2BreakMakeRatio
This object describes the Break-Make Ratio of Pulse Duration, in [msec].
RW only when r2Mode=manual. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.9.1.1.1.7 |
||||||||||||||||||||||||||||||||||
|
r2ReleaseGuardT2
Release Guard timing T2.
Release guard timing before going to idle, in [msec]. RW only when r2Mode=manual. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.9.1.1.1.8 |
||||||||||||||||||||||||||||||||||
|
r2Regret
Regret duration, in [sec].
RW only when r2Mode=manual. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.9.1.1.1.9 |
||||||||||||||||||||||||||||||||||
|
r2SeizeDetect
Seize Detect. Timer of the R2 incoming side.
Minimum duration to detect a valid seizure, in [msec]. RW only when r2Mode=manual. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.9.1.1.1.10 |
||||||||||||||||||||||||||||||||||
|
r2SeizeAckDelay
Timer of the R2 incoming side.
Delay before sending a valid seize ack signal, in [msec]. Applicable only when r2Mode=manual. only when r2Mode=manual. |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.9.1.1.1.11 |
||||||||||||||||||||||||||||||||||
|
r2ClearBackDetect
Timer of the R2 incoming side.
Minimum duration to recognize a valid clear-back, in [msec]. RW only when r2Mode=manual. |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.9.1.1.1.12 |
||||||||||||||||||||||||||||||||||
|
r2ClearFwdDetect
Timer of the R2 incoming side.
Minimum duration to recognize a valid clear-forward, in [msec]. RW only when r2Mode=manual. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.9.1.1.1.13 |
||||||||||||||||||||||||||||||||||
|
r2FaultDetect
Timer of the R2 incoming side.
Minimum duration to recognize a block signal, in [msec]. RW only when r2Mode=manual. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.9.1.1.1.14 |
||||||||||||||||||||||||||||||||||
|
r2FaultRemoveDetect
Timer of the R2 incoming side.
Minimum duration to recognize a valid block removal signal, in [msec]. RW only when r2Mode=manual. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.9.1.1.1.15 |
||||||||||||||||||||||||||||||||||
|
r2MeterPulseDuration
Timer of the R2 incoming side.
Duration of metering pulse to be sent, in [msec]. RW only when r2Mode=manual. |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.9.1.1.1.16 |
||||||||||||||||||||||||||||||||||
|
r2SeizeAckWait
Timer of the R2 outgoing side.
Minimum duration to receive seizure acknowledge signal, in [msec]. RW only when r2Mode=manual. |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.9.1.1.1.17 |
||||||||||||||||||||||||||||||||||
|
r2SeizeAckDetect
Timer of the R2 outgoing side.
Minimum duration to recognize a valid seizure acknowledge signal, in [msec]. RW only when r2Mode=manual. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.9.1.1.1.18 |
||||||||||||||||||||||||||||||||||
|
r2AnswerDetect
Timer of the R2 outgoing side.
Minimum duration to recognize a valid answer signal, in [msec]. RW only when r2Mode=manual. |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.9.1.1.1.19 |
||||||||||||||||||||||||||||||||||
|
r2BlockRemoveDetect
Timer of the R2 outgoing side.
Minimum duration to recognize a valid block removal signal, in [msec]. RW only when r2Mode=manual. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.9.1.1.1.20 |
||||||||||||||||||||||||||||||||||
|
r2MeterPulseDetect
Timer of the R2 outgoing side.
Minimum duration of incoming meter pulse, in [msec]. RW only when r2Mode=manual. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.9.1.1.1.21 |
||||||||||||||||||||||||||||||||||
|
r2ForcedDisconnect
Timer of the R2 outgoing side.
Minimum duration to recognize disconnect signal, in [msec]. RW only when r2Mode=manual. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.9.1.1.1.22 |
||||||||||||||||||||||||||||||||||
|
r2DisconnectAck
Timer of the R2 outgoing side.
Minimum duration to recognize disconnect acknowledge signal, in [msec]. RW only when r2Mode=manual. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.9.1.1.1.23 |
||||||||||||||||||||||||||||||||||
|
r2ReleaseGuardT1
Timer of the R2 outgoing side.
Minimum duration to release guard, in [msec]. During this time, no new call can be initiated. RW only when r2Mode=manual. |
SNMPv2-SMIInteger32r/w Constraints: range: 1-255Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.9.1.1.1.24 |
||||||||||||||||||||||||||||||||||
|
r2CnfgRowStatus
This object enables the user to add/delete entries to/from the table.
|
SNMPv2-TCRowStatusr/w Enumerated Values:
Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.3.1.6.9.1.1.1.25 |
r2TsTable
table.1.3.6.1.4.1.164.3.1.6.9.1.2
·
1 row entry
·
7 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
r2TsCnfgIdx
This attribute indicates the Idx of the Cnfg being accessed.
255 = TmpCnfg. 1 = Current Cnfg. Write is allowed only to TmpCnfg. |
Integer32 | .1.3.6.1.4.1.164.3.1.6.9.1.2.1.1 |
||||||||||||||||||||||
|
r2TsProfileIdx
Profile Index.
Valid values: 1..5 Only instances of profiles that are defined having agnSigProfType=r2Cas will exist in this table. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.9.1.2.1.2 |
||||||||||||||||||||||
|
r2TsIdx
TS Index.
Valid values: 1..31 |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.9.1.2.1.3 |
||||||||||||||||||||||
|
r2TsCallEnable
This object indicates the Enabled Call direction for the specific TS.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.9.1.2.1.4 |
||||||||||||||||||||||
|
r2TsMetering
This object indicates if the specific TS should support Metering.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.9.1.2.1.5 |
||||||||||||||||||||||
|
r2TsRowStatus
This object enables the user to add/delete entries to/from the table.
|
SNMPv2-TCRowStatusr/w Enumerated Values:
Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.3.1.6.9.1.2.1.6 |
||||||||||||||||||||||
|
r2TsReversePolarity
This object indicates if the specific TS should support Reverse Polarity.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.9.1.2.1.7 |
r2StatusTable
table.1.3.6.1.4.1.164.3.1.6.9.2.1
·
1 row entry
·
6 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
r2StatusSlotIdx
Slot Index
|
Enumeration | .1.3.6.1.4.1.164.3.1.6.9.2.1.1.1 |
||||||
|
r2StatusPortIdx
This object indicates a unique port number of the ML having
R2 interface. Valid values: exPrt1 (1)..exPrt4 (4) |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.9.2.1.1.2 |
||||||
|
r2StatusTsIdx
Time Slot index.
|
Integer32 | .1.3.6.1.4.1.164.3.1.6.9.2.1.1.3 |
||||||
|
r2StatusSigDirection
R2 Time Slot Signaling Direction.
|
Enumeration | .1.3.6.1.4.1.164.3.1.6.9.2.1.1.4 |
||||||
|
r2StatusTsState
R2 TS State
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.9.2.1.1.5 |
||||||
|
r2StatusProtocolState
R2 Protocol State.
|
Enumeration | .1.3.6.1.4.1.164.3.1.6.9.2.1.1.6 |
adslConfTable
table.1.3.6.1.4.1.164.3.1.6.10.1
·
1 row entry
·
14 columns
A list of ADSL Configuration entries
An entry in adslConfTable
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
adslConfCnfgIdx
This object indicates the Idx of the Config being accessed.
Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurations, Set can be performed only to the Temporary Config (=25… |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.10.1.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
adslConfFramingType
ADSL Frame type
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.10.1.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
adslConfPilotToneRequest
This parameter controls Pilot Tone Request (PTR).
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.10.1.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
adslConfTrellisCoding
This parameter enables/disables Trellis error detection code.
using error detection code may introduce delays. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.10.1.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
adslConfTransmissionMode
This parameter controls transmision mode:
Echo Cancellation is required when both ATU-C an ATU-R use the same frequency. Frequency Division (different frequency ranges for ATU-C and ATU-R) may limit data rate. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.10.1.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
adslConfStandardCompliance
This parameter indicates standard compliance
G.Lite enables extended ADSL range, ease of installation, but requires lower rate. |
Enumerationr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.1.6.10.1.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
adslConfMaxBitPerBin
This parameter indicates maximum number of bits per ADSL Bin.
Each Bin has bandwidth of 4khz. Range of values for this parameter is 0..15 |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.10.1.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
adslConfTxStartFreqBin
This parameter controls Transmit Start Bin number.
For ADSL Annex A - range of values is 6 to 31. For ADSL Annex B - range of values is 33 to 63. Frequency (in khz unit) is calculated by multiplying this parameter v… |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.10.1.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
adslConfTxEndFreqBin
This parameter controls Transmit End Bin number.
For ADSL Annex A - range of values is 6 to 31. For ADSL Annex B - range of values is 33 to 63. requency (in khz unit) is calculated by multiplying this value by bi… |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.10.1.1.9 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
adslConfRxStartFreqBin
This parameter controls Receive Start Bin number.
Range of values for this parameter depends on ADSL Annex supported, and transmisson mode (adslTransmissionMode) selected: ADSL Annex A and Echo Cancellation (EC) : … |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.10.1.1.10 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
adslConfRxEndFreqBin
This parameter controls Receive End Bin number.
Range of values for this parameter depends on ADSL Annex supported, and transmisson mode (adslTransmissionMode) selected: ADSL Annex A and Echo Cancellation (EC) : 6… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.10.1.1.11 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
adslConfTxPowerAttenuation
This parameter controls Transmit Gain in dB units
Range is 0 to 12dB. Resolution is 1 dB |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.10.1.1.12 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
adslConfPSDMask
This parameter controls Power Spectral Density Mask.
This object is applicable only for ADSL2. (adslConfStandardCompliance is one of the following: adsl2, adsl2Plus, adsl2Auto, adsl2PlusAuto |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.10.1.1.13 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
adslConfCommand
This parameter enables the user to perform commands on ADSL.
off(1) - default state. After any operation ends, value should be automatically set to off(1). restart(2) - restarts line synchronization process. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.10.1.1.14 |
adslStatusTable
table.1.3.6.1.4.1.164.3.1.6.10.2
·
1 row entry
·
7 columns
A list of Adsl Status entries
An entry in adslStatusTable
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
adslStatusBitRxRate
This parameter indicates actual Receive (Downstream)
rate on this channel. |
bpsSNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.10.2.1.1 |
||||||||||||||||
|
adslStatusSelectedStandard
This parameter indicates actual Standard
(transsmission mode) chosen after syncronization. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.10.2.1.2 |
||||||||||||||||
|
adslStatusOperationalState
This parameter indicates syncronization status.
|
Enumeration | .1.3.6.1.4.1.164.3.1.6.10.2.1.3 |
||||||||||||||||
|
adslStatusBitErrorRate
This parameter indicates the ratio between the number
of erroneous bits to the total bits number. The value is normalized to 10e-8. e.g. BER = 10 means BER = 10*10e-8 = 10e-7 |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.10.2.1.4 |
||||||||||||||||
|
adslStatusSNRCompensationMode
This parameter indicates whether special SNR compensation mode
has been activated or not. |
Enumeration | .1.3.6.1.4.1.164.3.1.6.10.2.1.5 |
||||||||||||||||
|
adslStatusSNRCompensation
This parameter indicates the target-SNR Firmware currently used.
|
dBSNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.10.2.1.6 |
||||||||||||||||
|
adslStatusSNRCorrection
This parameter indicates whether the ADSL chip is operating
according to standard ADSL coding gain (auto) or some other automatic SW configuration (respective to line attenuation). Units of this parameter are tenths of… |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.10.2.1.7 |
sdslConfTable
table.1.3.6.1.4.1.164.3.1.6.11.1
·
1 row entry
·
4 columns
A list of SDSL Configuration entries
An entry in sdslConfTable
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
sdslConfCnfgIdx
This object indicates the Idx of the Config being accessed.
Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurations, Set can be performed only to the Temporary Config (=255… |
Integer32 | .1.3.6.1.4.1.164.3.1.6.11.1.1.1 |
|
sdslConfRateAquisition
SDSL Rate Aquisition mode
Default value = fixed. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.11.1.1.2 |
|
sdslConfBaudRate
SDSL baud rate. Not applicable if rate aquisition is AutoNegotiation.
Default value = r144kbps |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.11.1.1.3 |
|
sdslConfMode
SDSL mode - COE (HTU-C) or CPE (HTU-R)
Default value = COE |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.11.1.1.4 |
shdslEndpointCurrTable
table.1.3.6.1.4.1.164.3.1.6.12.1
·
1 row entry
·
9 columns
This table is an extension of hdsl2ShdslEndpointCurrTable of rfc3276 It contains current status and performance information for segment endpoints in HDSL2/SHDSL Lines. As with other tables in this MIB indexed by ifIndex, entries in this table MUST be maintained in a persistent manner.
An entry in the shdslEndpointCurrTable. Each entry
contains status and performance information relating to a
single segment endpoint. It is indexed by the ifIndex of the
HDSL2/SHDSL line, the UnitId of the associate…
contains status and performance information relating to a
single segment endpoint. It is indexed by the ifIndex of the
HDSL2/SHDSL line, the UnitId of the associate…
Indexes
voiceIfCnfgIdx voiceIfPortIdx
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hdsl2ShdslEndpointCurrRcvGain
The current receive gain in hundredth of dB.
|
dBSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.12.1.1.1 |
||||||||||||||||||
|
hdsl2ShdslEndpointCurrTransPower
The current transmit power in tenth of dBm.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.12.1.1.2 |
||||||||||||||||||
|
hdsl2ShdslEndpointCurrPowerBO
The current transceiver actual power backoff from 0dB to 31dB.
|
dBSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.12.1.1.3 |
||||||||||||||||||
|
hdsl2ShdslEndpointCurrLineStatus
The current line synchronization status.
|
Enumeration | .1.3.6.1.4.1.164.3.1.6.12.1.1.4 |
||||||||||||||||||
|
hdsl2ShdslEndpointCurrOpState
The current operational state.
|
Bits | .1.3.6.1.4.1.164.3.1.6.12.1.1.5 |
||||||||||||||||||
|
hdsl2ShdslEndpointAccumulatedTimeElapsed
The time (in hundredths of a second) since the
accumulated counters were last re-initialized: Accumulated counters are hdsl2ShdslEndpointES, hdsl2ShdslEndpointSES, hdsl2ShdslEndpointCRCanomalies hdsl2S… |
RFC1155-SMITimeTicks Textual Convention: RFC1155-SMITimeTicks Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.12.1.1.6 |
||||||||||||||||||
|
hdsl2ShdslEndpointCurrPsd
This object indicates use of symmetric/asymmetric PSD (Power
Spectral Density) Mask for the associated SHDSL Line. |
Enumeration | .1.3.6.1.4.1.164.3.1.6.12.1.1.7 |
||||||||||||||||||
|
hdsl2ShdslEndpointValidIntervals
The number of previous 15 minutes intervals
for which valid data was collected. |
SNMPv2-SMIUnsigned32 Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.12.1.1.8 |
||||||||||||||||||
|
hdsl2ShdslEndpointValidDaysIntervals
The number of previous Days intervals
for which valid data was collected. |
SNMPv2-SMIUnsigned32 Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.12.1.1.9 |
shdslEndpointMaintTable
table.1.3.6.1.4.1.164.3.1.6.12.2
·
1 row entry
·
1 columns
This table supports maintenance operations (eg. loopbacks) to be performed on HDSL2/SHDSL segment endpoints. This table contains live data from equipment. As such, it is NOT persistent.
An entry in the hdsl2ShdslEndpointMaintTable. Each entry
corresponds to a single segment endpoint, and is indexed by the
ifIndex of the HDSL2/SHDSL line, the UnitId of the associated
unit and the side of the unit.
corresponds to a single segment endpoint, and is indexed by the
ifIndex of the HDSL2/SHDSL line, the UnitId of the associated
unit and the side of the unit.
Indexes
prtGsmConfigIdx1 prtGsmConfigIdx2
| Column | Syntax | OID |
|---|---|---|
|
shdslMaintPowerBackOff
This object configures the receiver at the associated
segment endpoint to operate in default or enhanced power backoff mode. powerbackoff may also be disabled |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.12.2.1.1 |
.1.3.6.1.4.1.164.3.1.6.12.3
·
1 row entry
·
4 columns
This table supports definitions of span configuration profiles for SHDSL lines. HDSL2 does not support these configuration options. This table MUST be maintained in a persistent manner.
Each entry corresponds to a single span configuration
profile. Each profile contains a set of span configuration
parameters. The configuration parameters in a profile are
applied to those lines referencing that profil…
profile. Each profile contains a set of span configuration
parameters. The configuration parameters in a profile are
applied to those lines referencing that profil…
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
hdsl2ShdslSpanConfEocCompatible
This object indicate if device supports only
standard EOC messages or also proprietary messages. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.12.3.1.1 |
||||||
|
hdsl2ShdslSpanConfAsymmetricPSDRate
This object indicates line rate when
rfc3276.hdsl2ShdslSpanConfPSD value is asymmetric(2). Seleceted rate depends on transmission mode - specified in Annex A or B of G.991.2. For Annex A; R1 selects the 776 or … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.12.3.1.2 |
||||||
|
hdsl2ShdslSpanConfWireInterfaceUsed
This object enable user to configure SHDSL port with 4 wires
to use 2 or 4 wires, or to auto detect far end number of wires |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.12.3.1.3 |
||||||
|
hdsl2ShdslSpanConfHandshake
This object indicates the Handshake Procedure.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.12.3.1.4 |
hdsl2ShdslIfConfTable
table.1.3.6.1.4.1.164.3.1.6.12.4.1
·
1 row entry
·
15 columns
This table enables configuration of HDSL2/SHDSL interfaces per configuration index. Write operation for products supporting Active+Temp configurations, is possible only on the Temp configuration(255).
An entry in the hdsl2ShdslIfConfTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hdsl2ShdslIfConfIdx
This object indicates the Idx of the Config being accessed.
Idx of 255 relates to the Temporary (Scratch) Config. Write operation for products supporting Active+Temp configurations, is allowed to Temporary configuratio… |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.12.4.1.1.1 |
||||||||||||||
|
hdsl2ShdslSideIdx
This object indicates the Side of the managed object: Near-End
or Far-End. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.12.4.1.1.2 |
||||||||||||||
|
hdsl2ShdslMaxBw
Maximum BW (Bandwidth) of the Shdsl Line, in Kbps units.
Respective Max No. of TSs = Max. Rate/64 This object can be Set only for a Central (xtuC) unit. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.12.4.1.1.3 |
||||||||||||||
|
hdsl2ShdslPwrBackoff
This object configures the receiver at the associated
segment endpoint to enable/disable power backoff mode. This object is similar to hdsl2ShdslMaintPowerBackOff, but per configuration. Therefore, the order of the enum… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.12.4.1.1.4 |
||||||||||||||
|
hdsl2ShdslTxMode
This object configures the Transmission Mode for the SHDSL Line.
Normally, This object can be Set only for a Central (xtuC) unit. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.12.4.1.1.5 |
||||||||||||||
|
hdsl2ShdslAttenuationThreshold
This object configures the Attentuation alarm threshold.
0=Off Valid values: 0..127 . |
dBSNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.12.4.1.1.6 |
||||||||||||||
|
hdsl2ShdslSnrMarginThreshold
This object configures the SNR margin alarm threshold.
0=Off Valid values: 0..15 . |
dBSNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.12.4.1.1.7 |
||||||||||||||
|
hdsl2ShdslTs0OverDsl
This object configures the way TS0 will be treated over the SHDSL Line.
looped - looped inside transparent - sent transparently over the DSL Line. This object can be Set only for a Central (xtuC) unit. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.12.4.1.1.8 |
||||||||||||||
|
hdsl2ShdslMode
This object is relevant only for the Near-End device.
stuC - Central stuR - Remote . |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.12.4.1.1.9 |
||||||||||||||
|
hdsl2ShdslTsCompactionMode
This object configures how TSs will be compacted over the SHDSL Line.
In both mapping cases (2),(3), only the TSs connected on the E1 line will be transferred over the SHDSL Line noCompaction - the whole E1 BW is reser… |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.12.4.1.1.10 |
||||||||||||||
|
hdsl2ShdslEocEnable
This object configures whether EOC protocol is supported by the Far-End
device working with this port. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.12.4.1.1.11 |
||||||||||||||
|
hdsl2ShdslFar1stIfNumOfTSs
This object configures the number of TSs of the SHDSL line
that belong to the 1st Interface of the Far-End device, where 1st means that these TSs are first on the SHDSL line. It is applicable only for N… |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.12.4.1.1.12 |
||||||||||||||
|
hdsl2ShdslFarEndDevice
This object indicates the Far-End device.
It is used for 2 purposes: - in order to know if EOC is used (EOC is used only when the device is any of the ASMi52 options: (4)..(7)) - in order to know how to work vs Far-En… |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.12.4.1.1.13 |
||||||||||||||
|
hdsl2ShdslPwrBackoffDb
This object configures the Power Backoff (in dB) of the
receiver, at the associated segment endpoint. 0=Off Valid values: 0..31 . |
dBSNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.12.4.1.1.14 |
||||||||||||||
|
hdsl2ShdslFarEndMuxTsa
This object represents Assignment of E1 TSs to Far-End MUX Interfaces.
It is relevant only when hdsl2ShdslSideIdx=nearEnd(2), when for the Near-End device, hdsl2ShdslMode=stuC(2)AND hdsl2ShdslFarEndDevice=(5),(6)or(7).… |
OctetStringr/w | .1.3.6.1.4.1.164.3.1.6.12.4.1.1.15 |
voiceIfCadenceCnfgTable
table.1.3.6.1.4.1.164.3.1.6.13.1
·
1 row entry
·
7 columns
Voice port ringing cadence configuration table. Each ringing cycle, indexed by voiceIfCadenceIdx, consists of a number of ring ON-Period/ring OFF-Period pairs. Pairs are indexed sequentially, according to voiceIfCadencePeriodIdx: 1,2,...number of pairs
Ringing cadence configuration per voice port.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
voiceIfCadenceCnfgIdx
This object indicates the Idx of the
Agent Cnfg the following objects refer to. 255=Temporary Cnfg (when relevant, Set is done only to this configuration). For Agents that support only one configuration, this objec… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.13.1.1.1 |
||||||||||||
|
voiceIfCadencePortIdx
Voice Port Index. May equal to the value of ifIndex.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.13.1.1.2 |
||||||||||||
|
voiceIfCadenceIdx
Cadence (ringing type) index.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.13.1.1.3 |
||||||||||||
|
voiceIfCadencePeriodIdx
Periods index (pair number) in a ringing cycle Cadence.
This index must be sequential, start from 1. Its maximum value is the number of pairs of certain ringing type. For Vmux-110, one or two period pair… |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.13.1.1.4 |
||||||||||||
|
voiceIfCadenceRowStatus
This attribute allows to create/delete
ringing cadence entry in this table. For Vmux-110, only a single cadance can be defined. Delete action of a period entry can be performed only if it is the last existing period of… |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.3.1.6.13.1.1.5 |
||||||||||||
|
voiceIfCadenceRingOnPeriod
Duration (in tenth of seconds) of Ringing (ON)
period. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.13.1.1.6 |
||||||||||||
|
voiceIfCadenceRingOffPeriod
Duration (in tenth of seconds) of Silence (OFF)
period. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.13.1.1.7 |
voiceIfCnfgTable
table.1.3.6.1.4.1.164.3.1.6.13.2
·
1 row entry
·
9 columns
Voice port configuration table.
Configuration per voice port.
Indexes
pdhLogPrtCnfgIdx pdhLogPrtIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
voiceIfCnfgIdx
This object indicates the Idx of the
Agent Cnfg the following objects refer to. 255=Temporary Cnfg (when relevant, Set is done only to this configuration). For Agents that support only one configuration, this objec… |
SNMPv2-SMIInteger32 Constraints: range: 1-255Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.13.2.1.1 |
||||||
|
voiceIfPortIdx
Index of voice port .
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.13.2.1.2 |
||||||
|
voiceIfRingingTimeout
Ringing timeout in seconds.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.13.2.1.3 |
||||||
|
voiceIfFlashTimeout
A time period in milliseconds. Flash (Register Recall)
is detected if On-Hook time is shorter than this timeout. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.13.2.1.4 |
||||||
|
voiceIfRxGain
Receive gain in dB.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.13.2.1.5 |
||||||
|
voiceIfTxGain
Transmission gain in dB.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.13.2.1.6 |
||||||
|
voiceIfSignalingABCD
Octet String.
Nibble No. 1 represents ON Hook (same for Rx and Tx). Nibble No. 2 represents OFF Hook (same for Rx and Tx). Nibble No. 3 represents Reverse Polarity. Nibble No. 4 represents Ring pattern 1. Nibble No.… |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.13.2.1.7 |
||||||
|
voiceIfState
Attribute indicating voice port state.
|
Enumeration | .1.3.6.1.4.1.164.3.1.6.13.2.1.8 |
||||||
|
voiceIfCallState
Attribute indicating the status of the call on this port.
In Vmux devices this attribute is used for FXS ports. |
Enumeration | .1.3.6.1.4.1.164.3.1.6.13.2.1.9 |
prtGsmConfigTable
table.1.3.6.1.4.1.164.3.1.6.14.1.1
·
1 row entry
·
18 columns
GSM Interface Configuration Table.
An entry in the GSM Interface Configuration Table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
prtGsmConfigIdx1
The first index of the table.
This object might represent the Configuration Index (1..100) being accessed, where Index=255 relates to the TmpCnfg. For devices with multiple configurations, Set is permitte… |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.14.1.1.1.1 |
||||||
|
prtGsmConfigIdx2
The second index of the table.
This object might represent the port index and for some devices might be the ifIndex. For System level or when NA, value = 1. |
SNMPv2-SMIUnsigned32 Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.14.1.1.1.2 |
||||||
|
prtGsmConfigIfType
The GSM Interface Type.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.14.1.1.1.3 |
||||||
|
prtGsmConfigUplinkTxDirection
The Tx Direction toward the network.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.4 |
||||||
|
prtGsmConfigSubChRate
The Sub Channel Rate.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.5 |
||||||
|
prtGsmConfigClockTracking
The Clock Tracking.
This object is relevant only when Egress Uplink is LAN and the device (e.g. Vmux) on the BSC side is Rx Clock and the device (e.g. Vmux) on the BTS side is Internal Clock. On this conf… |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.6 |
||||||
|
prtGsmConfigTrauIdleFrame
The TRAU frame to be used between calls.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.7 |
||||||
|
prtGsmConfigDownlinkTrauSilenceFrame
The TRAU frame to be used in the downlink direction
for silence/missing data. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.8 |
||||||
|
prtGsmConfigGprsFrame
The GPRS Frame Type.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.9 |
||||||
|
prtGsmConfigUnkTrauFrameSuppression
This object enables/disables suppression of unknown TRAU frames.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.10 |
||||||
|
prtGsmConfigUnkTrauFrameOptimization
This object enables/disables optimization of unknown TRAU frames.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.11 |
||||||
|
prtGsmConfigSilenceSuppressionRatio
The Silence Suppression Ratio, measured in percentages (1%).
0 = No Suppression. In case comfort noise is rapidly changed, it may cause the silence to be heard like a dead line instead of hearing the comf… |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.14.1.1.1.12 |
||||||
|
prtGsmConfigStatus
This object enables the user to create/delete entries in this table.
Its usage for values (1)..(6) should be identical to RowStatus SYNTAX. notApplicable(255) - should be used when the table is static … |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.13 |
||||||
|
prtGsmConfigUpstreamOptimization
This object represents the Optimization Mode
at the Upstream direction (BTS -> BSC). |
Bitsr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.14.1.1.1.14 |
||||||
|
prtGsmConfigDownstreamOptimization
This object represents the Optimization Mode
at the Downstream direction (BSC -> BTS). |
Bitsr/w | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.15 |
||||||
|
prtGsmConfigByteReversal
This object defines whether BTS/BSC reverses the bytes or not.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.16 |
||||||
|
prtGsmConfigTxJitter
The Transmit Jitter size (in msec), towards the BTS/BSC
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.14.1.1.1.17 |
||||||
|
prtGsmConfigSpdThreshold
The SPD (Smart Packet Drop) Threshold.
SPD mechanism decides which frames to drop according to the voice energy of the frame. A frame should be dropped in case its voice energy is lower tha… |
SNMPv2-SMIUnsigned32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.14.1.1.1.18 |
prtGsmTrafficTable
table.1.3.6.1.4.1.164.3.1.6.14.1.2
·
1 row entry
·
7 columns
GSM Interface Traffic Table.
An entry in the GSM Interface Traffic Table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
prtGsmTrafficIdx1
The first index of the table.
This object might represent the Configuration Index (1..100) being accessed, where Index=255 relates to the TmpCnfg. For devices with multiple configurations, Set is permitte… |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.14.1.2.1.1 |
||||||
|
prtGsmTrafficIdx2
The second index of the table.
This object might represent the port index and for some devices might be the ifIndex. For System level or when NA, value = 1. |
SNMPv2-SMIUnsigned32 Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.14.1.2.1.2 |
||||||
|
prtGsmTrafficType
The GSM Interface Traffic Type.
|
Enumeration | .1.3.6.1.4.1.164.3.1.6.14.1.2.1.3 |
||||||
|
prtGsmTrafficVpi
The VPI (of VPI/VCI pair) that should be used in connection
with this traffic type. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.14.1.2.1.4 |
||||||
|
prtGsmTrafficVci
The VCI (of VPI/VCI pair) that should be used in connection
with this traffic type. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.14.1.2.1.5 |
||||||
|
prtGsmTrafficMultiplexFrameSize
The Multiplexed Frame Size (in bytes) of this traffic type.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.14.1.2.1.6 |
||||||
|
prtGsmTrafficTxInterval
The Tx Interval (in msec) of this traffic type.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.14.1.2.1.7 |
ds0BundleTable
table.1.3.6.1.4.1.164.3.1.6.15.1
·
1 row entry
·
4 columns
This table contains additional objects for the standard dsx0BundleTable.
An entry augmenting the standard dsx0BundleEntry.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
ds0BundleTsBitFilter
Filter for controlling the bandwidth of the bundle.
The TS Bit Filter contains 8 bits (Hex): 00..FF. When a bit is 0: it means that no data will be Tx/Rx on this bit. For example: FF means 64K. In this case all 8 bits w… |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.6.15.1.1.1 |
|
ds0BundleUserDefTsBitFilter
User Defined Filter for controlling the bandwidth of the bundle.
This MIB object is relevant only when ds0BundleTsBitFilter = userDefined (4) This object is useful for users who want to define a special Filter that cann… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.6.15.1.1.2 |
|
ds0BundleTdmPortNum
This parameter indicates the TDM port number that the bundle
is associated to. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.15.1.1.3 |
|
ds0BundleTimeslotMask
This parameter indicates the timeslots allocated for the bundle:
Each bit represents a timeslot. Setting a bit to '1' denotes that the corresponding timeslot is allocated for that bundle. Bit 0 is not in use, since time… |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.15.1.1.4 |
pdhLogPrtConfigTable
table.1.3.6.1.4.1.164.3.1.6.16.1.1
·
1 row entry
·
3 columns
Configuration for PDH (Plesiochronous Digital Hierarchy) Logical ports/interfaces. For example: GFP (Generic Framing Procedure) logical interface or VCG (Virtual Concatenation Group) logical interface.
Entry in Configuration Table for PDH Logical Ports.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
pdhLogPrtCnfgIdx
This object indicates the Index of the Configuration being accessed.
Index of 255 relates to the Temporary/Edit (Scratch) Configuration. For products that support several configurations, Set can be performed only to the… |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.6.16.1.1.1.1 |
||||
|
pdhLogPrtIndex
This object indicates the number or ifIndex of the selected logical port.
|
SNMPv2-SMIUnsigned32 Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.16.1.1.1.2 |
||||
|
pdhLogPrtMaxDiffDelay
Maximum Differential Delay.
Largest allowed difference in msec. between delays in two links (E1/T1) that are members of the selected VCG. This object is relevant for VCG (Virtual Concatenation Group) only. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.16.1.1.1.3 |
pdhLogPrtStatusTable
table.1.3.6.1.4.1.164.3.1.6.16.2.1
·
1 row entry
·
3 columns
Status of PDH logical port
Entry in the PDH Logical Port Status Table
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
pdhLogPrtStatusIndex
This object indicates the number or ifIndex of the selected logical port.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.16.2.1.1.1 |
|
pdhLogPrtFrameDelineation
This object is relevant for GFP (Generic Framing Procedure) only.
It indicates the GFP Frame delineation status. Frame delineation means that the device has found the start of a frame - the protocol is synchronized |
Enumeration | .1.3.6.1.4.1.164.3.1.6.16.2.1.1.2 |
|
pdhLogPrtDiffDelay
Differential Delay.
This object indicates the largest detected difference in msec. between delays in two links (E1/T1) that are members of the selected VCG. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.16.2.1.1.3 |
.1.3.6.1.4.1.164.3.1.6.16.2.2
·
1 row entry
·
4 columns
Status for LCAS (Link Capacity Adjustment Scheme) members (links) of VCG logical port.
Entry in LCAS (Link Capacity Adjustment Scheme) links status table for
VCG (Virtual Concatenation Group) logical port.
VCG (Virtual Concatenation Group) logical port.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
vcgLcasMembersVcgIndex
This object indicates the number or ifIndex of the selected VCG
(Virtual Concatenation Group) logical port. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.16.2.2.1.1 |
|
vcgLcasMembersLinkIndex
This object indicates the number or ifIndex of the PDH link
that is a member of the VCG. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.16.2.2.1.2 |
|
vcgLcasMembersSourceStatus
This object summarizes the LCAS status of the source (Tx) side of the link.
|
Enumeration | .1.3.6.1.4.1.164.3.1.6.16.2.2.1.3 |
|
vcgLcasMembersSinkStatus
This object summarizes the LCAS status of the sink (Rx) side of the link.
|
Enumeration | .1.3.6.1.4.1.164.3.1.6.16.2.2.1.4 |
pdhLogPrtStatisTable
table.1.3.6.1.4.1.164.3.1.6.16.3.1
·
1 row entry
·
6 columns
Statistics for PDH (Plesiochronous Digital Hierarchy) Logical Port, currently used for GFP (Generic Framing Procedure) interface.
Entry in Statistics Table for PDH (Plesiochronous Digital Hierarchy) Logical Port.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
pdhLogPrtStatisIndex
This object indicates the number or ifIndex of the selected Interface.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.16.3.1.1.1 |
|
pdhLogPrtStatisRxCorrFrames
This object indicates the total number of Correct Frames received.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.16.3.1.1.2 |
|
pdhLogPrtStatisRxCorrOctets
This object indicates the total number of Correct Octets received.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.16.3.1.1.3 |
|
pdhLogPrtStatisRxCHecErrors
This object indicates the total number of Frames received with errors in
the Core header (i.e. cHEC field. cHEC means Core Header Error Correction). |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.16.3.1.1.4 |
|
pdhLogPrtStatisRxTHecErrors
This object indicates the total number of Frames received with errors in
the Type header (i.e. tHEC field. tHEC means Type Header Error Correction). |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.16.3.1.1.5 |
|
pdhLogPrtStatisRxFcsErrors
This object indicates the total number of Frames received with Frame
Check Sequence errors. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.6.16.3.1.1.6 |
gkGenTable
table.1.3.6.1.4.1.164.3.1.7.2
·
1 row entry
·
10 columns
General parameters for the VOIP GateKeeper.
An entry in table gkGenTable.
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
gkGenCallMode
This parameters shows whether the calls will go through the GK (routed) or
whether the calls will be direct from Endpoint to Endpoint without involving the GK (direct). |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.7.2.1.1 |
||||||
|
gkGenMaxConnections
MAX no. of connections enabled by the GK to take place simultaneously.
If the MAX no. of calls is exceeded, a busy signal will be returned. |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.7.2.1.2 |
||||||
|
gkGenDefaultDistance
The Distance allowed for endpoints that are registered dynamically.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.7.2.1.3 |
||||||
|
gkGenOutOfZoneDist
The Distance allowed for an out of zone endpoint that is making a call
through the gatekeeper. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.7.2.1.4 |
||||||
|
gkGenCallAcceptPolicy
Defines the policy concerning the incoming phone calls.
The importance of this parameter is for bidding and security matters. Accept All - all the incoming calls are accepted. Registered Only - the calls are accepted fr… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.7.2.1.5 |
||||||
|
gkGenIrqInterval
In order for the Gatekeeper to determine if an endpoint is turned off,
or has otherwise entered a failure mode, the Gatekeeper may use the Information Request (IRQ) to poll the endpoints at the certain interval (in seco… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.7.2.1.6 |
||||||
|
gkGenQ931Port
Q.931 Port no.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.7.2.1.7 |
||||||
|
gkGenRasPort
RAS Port no.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.7.2.1.8 |
||||||
|
gkGenRegPolicy
Policy of dynamic registrations in the Gatekeeper.
The GK will act according to the following policies: Accept All - The GK will enable all requesting endpoints to register dynamically. Predefined Only - The GK wil… |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.7.2.1.9 |
||||||
|
gkGenZoneId
Zone Identifier: 1 or 2 digits, (0-9)(1-9).
|
OctetStringr/w | .1.3.6.1.4.1.164.3.1.7.2.1.10 |
gkEndpTable
table.1.3.6.1.4.1.164.3.1.7.3
·
1 row entry
·
12 columns
Table containing the Endpoints that are registered (statically & Dynamically) with the current GK.
An entry in table gkEndpTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
gkEndpAliasTag
Alias Tag of the Endpoint.
|
MULTI-MEDIA-MIB-TCMmAliasTag Textual Convention: MULTI-MEDIA-MIB-TCMmAliasTag EnumerationType Values:
|
.1.3.6.1.4.1.164.3.1.7.3.1.1 |
||||||||||||||
|
gkEndpAlias
Alias of the Endpoint.
|
MULTI-MEDIA-MIB-TCMmAliasAddress Textual Convention: MULTI-MEDIA-MIB-TCMmAliasAddress OctetStringType Constraints: range: 1..512 |
.1.3.6.1.4.1.164.3.1.7.3.1.2 |
||||||||||||||
|
gkEndpRowStatus
The row status of the entry. This object is required to create
or delete rows remotely by a manager. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.3.1.7.3.1.3 |
||||||||||||||
|
gkEndpAddressTag
Address Tag of Endpoint.
|
MULTI-MEDIA-MIB-TCMmTAddressTagr/w Textual Convention: MULTI-MEDIA-MIB-TCMmTAddressTag EnumerationType Values:
|
.1.3.6.1.4.1.164.3.1.7.3.1.4 |
||||||||||||||
|
gkEndpAddress
Address of Endpoint.
|
SNMPv2-TCTAddressr/w Textual Convention: SNMPv2-TCTAddress OctetStringType Constraints: range: 1..255 |
.1.3.6.1.4.1.164.3.1.7.3.1.5 |
||||||||||||||
|
gkEndpID
Endpoint Identifier.
|
MULTI-MEDIA-MIB-TCMmEndpointIDr/w Textual Convention: MULTI-MEDIA-MIB-TCMmEndpointID OctetStringType Constraints: range: 1..128 |
.1.3.6.1.4.1.164.3.1.7.3.1.6 |
||||||||||||||
|
gkEndpType
This parameter shows whether the current endpoint is a GW or Terminal or
any other type of H.323 endpoint. |
MULTI-MEDIA-MIB-TCMmH323EndpointTyper/w Textual Convention: MULTI-MEDIA-MIB-TCMmH323EndpointType Integer32 |
.1.3.6.1.4.1.164.3.1.7.3.1.7 |
||||||||||||||
|
gkEndpQ931Port
Q.931 Port no.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.7.3.1.8 |
||||||||||||||
|
gkEndpDistance
Distance from the current endpoint to the GateKeeper with which it is
Registered. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.7.3.1.9 |
||||||||||||||
|
gkEndpRegMode
This parameter shows whether the Endpoint Registered Dynamically or Statically.
|
Enumeration | .1.3.6.1.4.1.164.3.1.7.3.1.10 |
||||||||||||||
|
gkEndpSetOnline
This parameter shows whether the endpoint will always be online or whether it
will be on line upon Dynamic Registration only. |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.7.3.1.11 |
||||||||||||||
|
gkEndpStatus
This parameter shows whether the endpoint is currently online.
|
Enumeration | .1.3.6.1.4.1.164.3.1.7.3.1.12 |
gkNeighbTable
table.1.3.6.1.4.1.164.3.1.7.4
·
1 row entry
·
6 columns
Table of GateKeepers that are Neighbors of the current Gatekeeper.
An entry in table gkNeighbTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
gkNeighbAddressTag
Tag of GK or GW address.
|
MULTI-MEDIA-MIB-TCMmTAddressTag Textual Convention: MULTI-MEDIA-MIB-TCMmTAddressTag EnumerationType Values:
|
.1.3.6.1.4.1.164.3.1.7.4.1.1 |
||||||||||||
|
gkNeighbAddress
Address of GK or GW.
|
SNMPv2-TCTAddress Textual Convention: SNMPv2-TCTAddress OctetStringType Constraints: range: 1..255 |
.1.3.6.1.4.1.164.3.1.7.4.1.2 |
||||||||||||
|
gkNeighbRowStatus
The row status of the entry. This object is required to create
or delete rows remotely by a manager. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.3.1.7.4.1.3 |
||||||||||||
|
gkNeighbLeadingAlias
This is the Leading Alias Address (Zone Prefix) that will be dialed in order to reach
the specific neighbor. |
MULTI-MEDIA-MIB-TCMmAliasAddressr/w Enumerated Values:
Textual Convention: MULTI-MEDIA-MIB-TCMmAliasAddress OctetStringType Constraints: range: 1..512 |
.1.3.6.1.4.1.164.3.1.7.4.1.4 |
||||||||||||
|
gkNeighbDistance
Distance between the local GateKeeper and the Neighbor GateKeeper.
|
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.7.4.1.5 |
||||||||||||
|
gkNeighbDescription
ASCII String Description for identifying the Neighbor.
|
MULTI-MEDIA-MIB-TCMmGatekeeperIDr/w Enumerated Values:
Textual Convention: MULTI-MEDIA-MIB-TCMmGatekeeperID OctetStringType Constraints: range: 1..128 |
.1.3.6.1.4.1.164.3.1.7.4.1.6 |
gwGenTable
table.1.3.6.1.4.1.164.3.1.7.5
·
1 row entry
·
10 columns
General parameters for the VOIP GateWay.
An entry in table gwGenTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
gwGenGwId
A character string of up to 20 characters identifying the gateway.
|
MULTI-MEDIA-MIB-TCMmEndpointIDr/w Textual Convention: MULTI-MEDIA-MIB-TCMmEndpointID OctetStringType Constraints: range: 1..128 |
.1.3.6.1.4.1.164.3.1.7.5.1.1 |
||||||
|
gwGenQ931Port
The Q.931 port no. of the Gateway.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.7.5.1.2 |
||||||
|
gwGenRasPort
The RAS port no. of the Gateway.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.7.5.1.3 |
||||||
|
gwGenMode
GW Mode:
disable - The GW is not activated. cvsIp - CVS is a Compressed Voice System. The GW will compress voice calls at a ratio of 16 to 1. 16 time slots of E1/T1 will be compressed into … |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.7.5.1.4 |
||||||
|
gwGenVoipExtension
This is the extension number of the VOIP protocol.
It is used for the Voice card to identify the calls made through the VoIP card. The user may choose an arbitrary value for this field, the only restriction is that ther… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.7.5.1.5 |
||||||
|
gwGenRemGwAddress
Defines the remote gateway address (IP + port). It is important for gateway
to gateway connection. |
SNMPv2-TCTAddressr/w Textual Convention: SNMPv2-TCTAddress OctetStringType Constraints: range: 1..255 |
.1.3.6.1.4.1.164.3.1.7.5.1.6 |
||||||
|
gwGenMaxConnections
MAX no. of connections enabled by the GW.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.7.5.1.7 |
||||||
|
gwGenTOS
Type of Service.
The BIT Format is consistent with the IP standard: +-----+-----+-----+-----+-----+-----+-----+-----+ | | | | | PRECEDENCE | TYPE OF SERVICE | 0 | |… |
OctetStringr/w | .1.3.6.1.4.1.164.3.1.7.5.1.8 |
||||||
|
gwGenBackupGkAddr
Defines the backup gatekeeper address (IP + port).
When the backup GK is active, all the calls will be routed to it and it will be responsible for their address translation. The first GK address is defined in the standa… |
SNMPv2-TCTAddressr/w Textual Convention: SNMPv2-TCTAddress OctetStringType Constraints: range: 1..255 |
.1.3.6.1.4.1.164.3.1.7.5.1.9 |
||||||
|
gwGenTimeToRegister
The GW should register every 'Time to Register' seconds with the GK.
The 'Time to Register' range is from 0 to 900 seconds in intervals of 60 seconds. 0 means Never. When the GK becomes active the Gateways that are … |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.7.5.1.10 |
radH245ConfigTable
table.1.3.6.1.4.1.164.3.1.7.6
·
1 row entry
·
2 columns
This table contains information about H.245 configuration parameters. It is a list of configuration parameter entries. The number of entries equals to the number of H.245 stacks in a system.
It contains objects that describe the H.245 configuration parameters.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
h245MaxJitter
Maximum peak to peak delivery (in miliseconds) of audio packets
to the transport layer that the transmitter shall cause. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.7.6.1.1 |
|
h245Tunneling
This variable enables or disables the usage of Tunneling.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.7.6.1.2 |
rtpMultiplexTable
table.1.3.6.1.4.1.164.3.1.7.7
·
1 row entry
·
4 columns
RTP Multiplexing table. RTP Multiplexing: In IP telephony system, the addition of packet headers, including IP, UDP and RTP headers, increases the header overhead, decreasing efficient transmission. Also, because of large numbers of short voice packets flowing into the network, Internet load increases, eventually resulting in large delay and packet loss. RTP Multiplexing is a way to send multiple RTP packets between a pair of Gateways, with a single IP frame. This will reduces the header overhead and decreases delay by enabling voice transmission with fewer packets.
An entry in table rtpMultiplexTable.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
rtpMultiplexedRtp
RTP Multiplexing is a way to send multiple RTP packets with a single IP frame.
This will reduce the header overhead and decrease the delay by enabling voice transmission with fewer packets. The option of this field are:… |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.7.7.1.1 |
|
rtpMultiplexFrameSize
Defines the maximum size in Bytes of the multiplexed frame.
In some cases this must be limited to avoid IP fragmentation, which makes the multiplexing useless, and can also decrease the damage in case of the frame loss.… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.7.7.1.2 |
|
rtpMultiplexInterval
Defines the maximum amout of time (msec.) between multiplexed frames
that are sent. Legal values: 10-90 msec. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.7.7.1.3 |
|
rtpMultiplexPcktRedundancy
Defines the the number of times each voice frame should be transmitted.
At present legal values are: 1-4. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.1.7.7.1.4 |
voipTariffServerTable
table.1.3.6.1.4.1.164.3.1.7.8.1
·
1 row entry
·
4 columns
VoIP Tariff Server table.
An entry in table voipTariffServerTable.
Indexes
voipServiceCfgIdx voipServicePrtIdx voipServiceType
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
voipTariffServerCnfgIdx
This object indicates the Index of the Configuration (1..255) being
accessed ; Index=255 relates to the Temporary Configuration. Set is allowed only to the Temporary Configuration. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.7.8.1.1.1 |
||||||||
|
voipTariffServerIdx
This object indicates the Index of the Tariff Server being
accessed (1, 2). |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.7.8.1.1.2 |
||||||||
|
voipTariffServerIpAddress
This object defines the IP Address of the Tariff Server.
|
RFC1155-SMIIpAddressr/w Enumerated Values:
Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.3.1.7.8.1.1.3 |
||||||||
|
voipTariffServerPort
This object defines the used TCP/UDP port of the Tariff Server.
|
SNMPv2-SMIUnsigned32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.7.8.1.1.4 |
radSipCommonCfgTable
table.1.3.6.1.4.1.164.3.1.7.9.1.1.1.1
·
1 row entry
·
4 columns
SIP Common Configuration table. This table contains the common configuration objects applicable to all SIP entities.
A row of SIP Common Configuration table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
radSipCommonCfgIdx
The index of the table.
This object might represent the Configuration Index (1..100) being accessed; Index=255 relates to the TmpCnfg. For devices with multiple configurations, Set is permitted to TmpCnfg… |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.7.9.1.1.1.1.1.1 |
||||||
|
radSipCommonCfgListenPort
This object represents the SIP Listening Port number.
|
SNMPv2-SMIUnsigned32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.7.9.1.1.1.1.1.2 |
||||||
|
radSipCommonCfgRtpBaseUdpPort
This object represents the RTP Base UDP Port number.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.7.9.1.1.1.1.1.3 |
||||||
|
radSipCommonCfgRtpIpTos
This object represents the TOS byte value
that will be written in the IP header for RTP packets only. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.7.9.1.1.1.1.1.4 |
radSipRegCfgTable
table.1.3.6.1.4.1.164.3.1.7.9.1.2.1.1
·
1 row entry
·
12 columns
SIP Registrar Configuration table.
A row of SIP Registrar Configuration table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
radSipRegCfgIdx
The first index of the table.
This object might represent the Configuration Index (1..100) being accessed; Index=255 relates to the TmpCnfg. For devices with multiple configurations, Set is permitted to T… |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.7.9.1.2.1.1.1.1 |
||||||||||||||||||||||||
|
radSipRegIdx
This object represents the Registrar Index.
|
SNMPv2-SMIUnsigned32 Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.7.9.1.2.1.1.1.2 |
||||||||||||||||||||||||
|
radSipRegActivation
This object allows the user to activate the Registrar.
If changed from enable(3) to disable(2) - device will be disconnected from server (stop sending renewal messages). If changed from disable(2) to e… |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.7.9.1.2.1.1.1.3 |
||||||||||||||||||||||||
|
radSipRegAddr
This object represents the Registrar's IP/URL Address.
|
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.1.7.9.1.2.1.1.1.4 |
||||||||||||||||||||||||
|
radSipRegUdpPort
This object represents the Registration's Destination UDP Port number.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.7.9.1.2.1.1.1.5 |
||||||||||||||||||||||||
|
radSipRegRenewalTimer
This object represents the Registration's Renewal Timer, in seconds.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.7.9.1.2.1.1.1.6 |
||||||||||||||||||||||||
|
radSipRegDomain
This object represents the User Agent's Domain Name.
|
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Enumerated Values:
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.1.7.9.1.2.1.1.1.7 |
||||||||||||||||||||||||
|
radSipRegMode
This object indicates the Registration Mode:
gateway(1) - one registration for the device localEntries(2) - number of registrations are defined according to the number of local entries. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.7.9.1.2.1.1.1.8 |
||||||||||||||||||||||||
|
radSipRegUserDefinition
This object indicates the User configuration:
gateway(1) - single user configuration for the device localEntries(2) - different user configuration for each local entry. This object is irrelevant when… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.7.9.1.2.1.1.1.9 |
||||||||||||||||||||||||
|
radSipRegCallWithoutReg
This object indicates whether a call is enabled without registration.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.7.9.1.2.1.1.1.10 |
||||||||||||||||||||||||
|
radSipRegUserParams
This object indicates the User's parameters.
This object is irrelevant when radSipRegUserDefinition = localEntries(2). |
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.1.7.9.1.2.1.1.1.11 |
||||||||||||||||||||||||
|
radSipRegRowStatus
This object enables the user to create/delete entries in this table.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.3.1.7.9.1.2.1.1.1.12 |
voipNetRoutTable
table.1.3.6.1.4.1.164.3.1.7.9.2
·
1 row entry
·
10 columns
Network Routing table.
A row of Network Routing table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
voipNetRoutCfgIdx
The first index of the table.
This object might represent the Configuration Index (1..100) being accessed; Index=255 relates to the TmpCnfg. For devices with multiple configurations, Set is permitted to T… |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.7.9.2.1.1 |
||||||||||||||||||||||||||||||||
|
voipNetRoutPrefix
This object represents the prefix number.
This prefix can include non-decimal digits, such as * or #. The default route will be represented by an empty prefix. |
SNMP-FRAMEWORK-MIBSnmpAdminString Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.1.7.9.2.1.2 |
||||||||||||||||||||||||||||||||
|
voipNetRoutRowStatus
This object enables the user to create/delete entries in this table.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.3.1.7.9.2.1.3 |
||||||||||||||||||||||||||||||||
|
voipNetRoutMinDigits
This object indicates the Minimum number of digits.
|
SNMPv2-SMIUnsigned32r/w Constraints: range: 1-255Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.7.9.2.1.4 |
||||||||||||||||||||||||||||||||
|
voipNetRoutMaxDigits
This object indicates the Maximum number of digits.
|
SNMPv2-SMIUnsigned32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.7.9.2.1.5 |
||||||||||||||||||||||||||||||||
|
voipNetRoutAddr
This object indicates the route's IP/URL Address.
|
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.1.7.9.2.1.6 |
||||||||||||||||||||||||||||||||
|
voipNetRoutUdpPort
This object indicates the route's destination UDP port number.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.7.9.2.1.7 |
||||||||||||||||||||||||||||||||
|
voipNetRoutOutboundProxySupport
This object indicates whether the Outbound Proxy is supported.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.7.9.2.1.8 |
||||||||||||||||||||||||||||||||
|
voipNetRoutOutboundProxyAddr
This object indicates the Outbound Proxy's IP/URL Address.
|
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.1.7.9.2.1.9 |
||||||||||||||||||||||||||||||||
|
voipNetRoutOutboundProxyUdpPort
This object indicates the Outbound Proxy UDP port number.
|
SNMPv2-SMIUnsigned32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.7.9.2.1.10 |
voipNumManipTable
table.1.3.6.1.4.1.164.3.1.7.9.3
·
1 row entry
·
6 columns
Numbering Manipulation table.
A row of Numbering Manipulation table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
voipNumManipCfgIdx
The first index of the table.
This object might represent the Configuration Index (1..100) being accessed; Index=255 relates to the TmpCnfg. For devices with multiple configurations, Set is permitted to T… |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.7.9.3.1.1 |
||||||||||||||||||||||||||||||||||||
|
voipNumManipTypeId
This object represents the Numbering Manipulation's Type ID.
Type ID represents a unique Type, which can be different for each device. For Vmux-300 devices - Type ID Manipulated Number … |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.7.9.3.1.2 |
||||||||||||||||||||||||||||||||||||
|
voipNumManipRuleIdx
This object represents the Rule index.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.7.9.3.1.3 |
||||||||||||||||||||||||||||||||||||
|
voipNumManipRowStatus
This object enables the user to create/delete entries in this table.
|
SNMPv2-TCRowStatusr/w Enumerated Values:
Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.3.1.7.9.3.1.4 |
||||||||||||||||||||||||||||||||||||
|
voipNumManipOriginalNumber
This object represents the original number (before manipulation).
|
SNMPv2-SMIUnsigned32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.7.9.3.1.5 |
||||||||||||||||||||||||||||||||||||
|
voipNumManipNewNumber
This object represents the new number (after manipulation).
|
SNMPv2-SMIUnsigned32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.7.9.3.1.6 |
voipServiceTable
table.1.3.6.1.4.1.164.3.1.7.9.4.1
·
1 row entry
·
9 columns
Services table.
A row of Service table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
voipServiceCfgIdx
The first index of the table.
This object might represent the Configuration Index (1..100) being accessed; Index=255 relates to the TmpCnfg. For devices with multiple configurations, Set is permitted to T… |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.7.9.4.1.1.1 |
||||||||||||||||||||||||||
|
voipServicePrtIdx
This object represents the Port Index.
When irrelevant, value will be 1. |
SNMPv2-SMIUnsigned32 Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.7.9.4.1.1.2 |
||||||||||||||||||||||||||
|
voipServiceType
This object represents the Service's Type.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.7.9.4.1.1.3 |
||||||||||||||||||||||||||
|
voipServiceSupport
This object represents the Service's support.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.1.7.9.4.1.1.4 |
||||||||||||||||||||||||||
|
voipServiceCallForwardType
This object represents the Call Forward Type.
It is relevant only for voipServiceType = callForward(1). |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.7.9.4.1.1.5 |
||||||||||||||||||||||||||
|
voipServiceCallForwardPhoneNo
This object represents the Phone Number to be forwarded.
It is relevant only for voipServiceType = callForward(1). |
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.1.7.9.4.1.1.6 |
||||||||||||||||||||||||||
|
voipServiceCallForwardNoReplyTimeout
This object indicates the No Reply Timeout in seconds.
It means how many seconds with no reply should pass so that this period of time will be considered as No Reply. It is relevant only for voipServiceType = callForwar… |
SNMPv2-SMIUnsigned32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.7.9.4.1.1.7 |
||||||||||||||||||||||||||
|
voipServiceCallerIdType
This object represents the Caller ID Type.
It is relevant only for voipServiceType = callerIdRestriction(3). |
Enumerationr/w | .1.3.6.1.4.1.164.3.1.7.9.4.1.1.8 |
||||||||||||||||||||||||||
|
voipServiceCallerIdDisplayString
This object represents the string that should be displayed
when no restriction is applied. It is relevant only for voipServiceType = callerIdRestriction(3). |
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.1.7.9.4.1.1.9 |
voipFeatureTable
table.1.3.6.1.4.1.164.3.1.7.9.4.2
·
1 row entry
·
4 columns
Feature table.
A row of Feature table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
voipFeatureCfgIdx
The first index of the table.
This object might represent the Configuration Index (1..100) being accessed; Index=255 relates to the TmpCnfg. For devices with multiple configurations, Set is permitted to T… |
SNMPv2-SMIUnsigned32 Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.7.9.4.2.1.1 |
||||||||||||||||||
|
voipFeaturePrtIdx
This object represents the Port Index.
When irrelevant, value will be 1. |
SNMPv2-SMIUnsigned32 Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.1.7.9.4.2.1.2 |
||||||||||||||||||
|
voipFeatureType
This object represents the Feature's Type.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.1.7.9.4.2.1.3 |
||||||||||||||||||
|
voipFeatureKeypadString
This object represents the Feature's Keypad string.
This string is a combination of digits, * and #. |
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Enumerated Values:
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.1.7.9.4.2.1.4 |
mdlPbxFramerCnfgTable
table.1.3.6.1.4.1.164.3.2.2.1.1.1
·
1 row entry
·
10 columns
This table contains parameters relevant to a module belonging to a digital voice system, except mdlPbxFraEnhEcho which is relevant also for analog cards.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
mdlPbxFraCnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.2.1.1.1.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlPbxFraSltIdx
The slot relevant to this module.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.2.1.1.1.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlPbxFraEnhEcho
Refers to external ports of an analogue module
and to the internal ports of the other mvc4 types of modules. ms16(3) means that the four voice ports have enhanced echo of 16ms. ms32(4) means that the two first p… |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.2.1.1.1.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlPbxFraTSGroupAss
In case of T1 modules:
group1=(1,2,3,4), ...., group6=(21,22,23,24) while in case of E1 modules: - If prtExPh1MlLineType=g732sE1 or g732sE1CRC: group1=(1,2,3,4),..,group4=(13,14,15,17), group5=(18,19,20,2… |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.2.1.1.1.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlPbxFraSignalMode
Refers to the signaling mode of the Framer module.
tieTrunk(2), tieInvert(3), casTrans(4) are standard coding of the signaling protocol. casTrans(4) is Channel Associated Signaling (the signaling is withi… |
Enumerationr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.2.2.1.1.1.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlPbxFraSignalVector
In the case of mdlPbxFraSignalMode = userDefined(5), this
field defines the A,B,C Bits. D bit is supplied for future versions. Bit 1 = Bit A ON Hook - Local Bit 2 = Bit B ON Hook - Local Bit 3 = Bit C ON Hook - Lo… |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.2.1.1.1.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlPbxFraSignalMask
In the case of mdlPbxFraSignalMode = userDefined(5), this
field defines the 'don't care' A,B,C Bits. D bit is supplied for future versions. Bit 1 = Bit A ON Hook - Local Bit 2 = Bit B ON Hook - Local Bit 3 = Bit C … |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.2.1.1.1.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlPbxFraFramerSlot
Slot where is sitting the Framer.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.2.1.1.1.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlPbxFraSignaling
Signaling - describes the way the signaling ABCD bits pass from the
local extension to the remote extension and vice-versa. endToEnd = the signaling ABCD bits pass without change from local to remote exte… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.2.1.1.1.1.9 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlPbxFraTransSigTs
This is the Time Slot that is used for Transparent CCS signaling.
The values of this TS are 1-24 for T1 & 1-31 for E1. The default for E1 is 16 & for T1 it is 24. If no signaling is used then the TS should be 255 (None). |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.2.1.1.1.1.10 |
mdlProtIpTable
table.1.3.6.1.4.1.164.3.2.2.1.2
·
1 row entry
·
4 columns
This table contains Protected IP Addresses for ML-IP cards when working in IP Ring Mode.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
mdlProtIpCnfgIdx
This attribute indicates the Idx of the Cnfg being accessed.
Idx 255 relates to the TmpCnfg. For Agents having several configuration, Write operation is allowed only to the Temporary Configuration. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.2.1.2.1.1 |
||||||||||||||||||||
|
mdlProtIpSlotIdx
This attribute indicates a unique slot position where
the module is inserted. In the 2104 Unit the entries io6(10)..io16) are not valid. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.2.1.2.1.2 |
||||||||||||||||||||
|
mdlProtIpAddress
A Protected IP address.
|
RFC1155-SMIIpAddress Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.3.2.2.1.2.1.3 |
||||||||||||||||||||
|
mdlProtIpRowStatus
This parameter allows creating/deleting entries of this table.
|
SNMPv2-TCRowStatusr/w Enumerated Values:
Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.3.2.2.1.2.1.4 |
mdlStatTable
table.1.3.6.1.4.1.164.3.2.2.2.1
·
1 row entry
·
4 columns
A table.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
mdlStatSltIdx
A unique number to identify a slot position in the mux.
In the 2104 Unit the entries psB(2),clB(4),io6(10)..io12(16) are not valid. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.2.2.1.1.1 |
||||||||||||||||
|
mdlStatHostIP
The host interface IP address when DHCP Client=Yes.
This object is relevant only when DHCP Client=Yes |
RFC1155-SMIIpAddress Enumerated Values:
Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.3.2.2.2.1.1.2 |
||||||||||||||||
|
mdlStatHostMask
The host interface subnet mask when DHCP Client=Yes.
This object is relevant only when DHCP Client=Yes |
RFC1155-SMIIpAddress Enumerated Values:
Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.3.2.2.2.1.1.3 |
||||||||||||||||
|
mdlStatDefaultGateway
Default Gateway's IP Address when DHCP Client=Yes.
This object is relevant only when DHCP Client=Yes |
RFC1155-SMIIpAddress Enumerated Values:
Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.3.2.2.2.1.1.4 |
prtSExHsfStatTable
table.1.3.6.1.4.1.164.3.2.3.1.6
·
1 row entry
·
4 columns
A table.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtSExHsfSltIdx
This attribute indicates a unique slot position where
the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.1.6.1.1 |
||||||||||||||||||
|
prtSExHsfPrtIdx
This attribute indicates a unique port number.
|
Enumeration Constraints: range: 1-99 |
.1.3.6.1.4.1.164.3.2.3.1.6.1.2 |
||||||||||||||||||
|
prtSExHsfInterfaceTyp
This attribute indicates a unique interface type of a
selected port. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.1.6.1.3 |
||||||||||||||||||
|
prtSExHsfRts
This attribute indicates a unique RTS control signal state.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.1.6.1.4 |
prtIsdnStatusTable
table.1.3.6.1.4.1.164.3.2.3.1.16
·
1 row entry
·
6 columns
This table contains ISDN Statistics parameters that do not appear in the standard MIBs or for agents that don't support the standard Index of Call Set Up Time.
Entries for ISDN Statistics parameters that do not appear in the standard MIBs
or for agents that don't support the standard Index of Call Set Up Time.
or for agents that don't support the standard Index of Call Set Up Time.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
prtIsdnStatusDspMode
The DSP can be in one of the following Modes:
Voice, Idle, Fax, Voice Band Data (VBD)- Modem. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.1.16.1.1 |
||||||
|
prtIsdnStatusCallState
The state that the current call is in.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.1.16.1.2 |
||||||
|
prtIsdnStatusCallingNumber
This is the local Number (ISDN Address) associated with this entry.
|
SNMPv2-TCDisplayString Enumerated Values:
Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.2.3.1.16.1.3 |
||||||
|
prtIsdnStatusCalledNumber
This is the remote Number (ISDN Address) associated with this entry.
|
SNMPv2-TCDisplayString Enumerated Values:
Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.2.3.1.16.1.4 |
||||||
|
prtIsdnStatusCalledIP
This is the remote IP Address associated with this entry.
|
RFC1155-SMIIpAddress Enumerated Values:
Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.3.2.3.1.16.1.5 |
||||||
|
prtIsdnStatusCallDirection
Attribute indicating the Direction of the Call.
The value of notApplicable will be used for example when prtIsdnStatusCallState = notActive(14). |
Enumeration | .1.3.6.1.4.1.164.3.2.3.1.16.1.6 |
prtExClCnfgTable
table.1.3.6.1.4.1.164.3.2.3.2.1.1
·
1 row entry
·
10 columns
A table.
All the entries at this table are identical (have the same
value) for all the configurations (1..100) except the
TmpCnfg.
The write operation into the Table Objects is valid only
to the TmpCnfg entry.
value) for all the configurations (1..100) except the
TmpCnfg.
The write operation into the Table Objects is valid only
to the TmpCnfg entry.
Indexes
prtExPh1MlTsCnfgIdx prtExPh1MlTsSltIdx prtExPh1MlTsPrtIdx prtExPh1MlTsIdx
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtExClCnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg. |
Integer32 Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.2.3.2.1.1.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExClSltIdx
This attribute indicates a unique slot position where
the card is inserted. Because the second Cl is only for redundancy, all the parameters are identical in the two modules, i.e. change of any parameter in one module… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.1.1.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExClPrtIdx
This attribute indicates a unique port number.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.1.1.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExClUsage
This attribute indicates what is the usage of the port.
|
Enumeration | .1.3.6.1.4.1.164.3.2.3.2.1.1.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExClRate
This attribute indicates the operation rate of the port.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.1.1.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExClDataBits
This attribute indicates the number of data bits in async
frame |
Enumeration | .1.3.6.1.4.1.164.3.2.3.2.1.1.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExClParity
This attribute indicates if the parity operation mode in
async frame |
Enumeration | .1.3.6.1.4.1.164.3.2.3.2.1.1.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExClStopBits
This attribute indicates the minimum number of stop bits in
the tx async frame |
Enumeration | .1.3.6.1.4.1.164.3.2.3.2.1.1.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExClRoutingProtocol
This attribute indicates the routing protocol of the port.
When prtExClUsage is nmsSlip or nmsPpp - all values are applicable . Else - only 'none' is applicable. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.1.1.1.9 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExClEnabled
This attribute indicates if Ethernet port of CL
is enabled or not for management. It is applicable only on the ETH port of the CL, when the MP includes an ML-IP card. disabled - will happen when there is Inband Managem… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.1.1.1.10 |
prtExPh1MlCnfgTable
table.1.3.6.1.4.1.164.3.2.3.2.2.1
·
1 row entry
·
32 columns
- For products supporting more than one configuration, the write operation into the Table is valid only to the TmpCnfg entry. - For products that do not support configurations, the write operation into the Table will be to prtExPh1MlCnfgIdx=1.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtExPh1MlCnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.1.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlSltIdx
This attribute indicates a unique slot position where
the module is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid. For the Vmux2100 Main Board notApplicable (1) is used. |
Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.1.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlPrtIdx
This attribute indicates a unique port number.
MP-2100/2200: MTML-1/E1 and MTML-1/T1 cards have only one external interface. inPrt1, inPrt2 - for MTML-H/2E1 and HSH cards. inPrt1..inPrt4 - for MTML-E2 and MSL-4 cards. … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.1.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlConnect
This attribute indicates whether the port should be considered
in any of the mux algorithms. It also affects all the card considerations because it may indicate that the module has only one physical interface. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.1.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlLineType
This attribute is the line type parameter for T1/E1 interface.
The user should select only the values which are relevant to the specific port: (2),(3), (8) - for T1 port (4)..(7), (9) - for E1 port. (101) framed - … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.1.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlLineCode
This attribute is the line code parameter used for T1/E1
interface. The user should select only the parameters which are relevant to the specific card: T1 line code parameters for MPH.1/T1 E1 line code parameters for MP… |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.2.1.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlLineLen
This attribute is the line length parameter used only for T1/DSU
interfaces. lenXXXpXXXft = len-XXX-XXXft. |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.2.1.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlRestoreTime
The time passing from the disappearance of the loss of
synchronization condition (red alarm) to the restoration of normal service. The options 1secFast(2) and 10sec62411(3) for E1 interfaces are proprietary implementati… |
Enumerationr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.2.3.2.2.1.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlTxGain
This attribute is the tx gain parameter used only for
T1/CSU interfaces. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.1.1.9 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlRxSensitivity
This attribute is the rx line sensitivity parameter.
low26dBm, high36dBm - applicable for T1-CSU shortHaul, longHaul - applicable for MTML-4 cards low15dbm was added for vmux110/210 T1 ports. |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.2.1.1.10 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlIdleCode
Determines the code for transmission in empty time slots.
Type value(00-FFH), Excluding 0H,8H,10H,12H,21H,24H,42H,49H, 84H,92H |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.2.1.1.11 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlTdmTrunk
This attribute indicates whether the port is used to transfer
TDM cards data and through which Bus. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.1.1.12 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlClkMode
Defines the clock operation mode of the T1/E1 interface.
Ports that are connected to the TDM Buses must be in nodalTiming(3) clock mode. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.1.1.13 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlMfClkSrcSlt
This attribute indicates whether the port Tx multiframe is
synchronized with Rx multiframe of another port and the slot position of that port. This operation is required in order to bypass signaling of PCM voice channel… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.1.1.14 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlMfClkSrcPrt
A unique number to identify a port position in the mux. It
has no effect when the prtExPh1MlMfClkSrcSlt selected is Local. inPrt1 - for MTML-H/E1 cards. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.1.1.15 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlFdlType
A unique number to identify the side of the FDL operation.
Normal: 'response' for the user side and 'command' for the PTT side. Applicable only when working with ESF-T1 link |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.2.1.1.16 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlInbandMng
A unique number to identify an Inband management over the
link. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.1.1.17 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlInbandMngRate
A unique number to identify the rate of the Inband
management (Kbps). E1 port - it is not applicable when prtExPh1MlInbandMng selected is off. T1 port - it is not applicable when prtExPh1MlInbandMng … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.1.1.18 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlRedundType
This object determines the ML redundancy type:
none - no ML redundacy dualCableAIS - each ML card is connected by a separate dualCableParallelTx cable to the other MUX (two cables connect … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.1.1.19 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlRedundSlot
This object indicates the slot containing the redundacy ML
card, coupled with the current ML (prtExPh1MlSltIdx). When prtExPh1MlRedundType=none (no ML redundancy) this object will be 'notApplicable'. In the ?004 Unit th… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.1.1.20 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlRedundPort
This object indicates the redundacy ML port, coupled with the
current ML port (prtExPh1MlPrtIdx). When prtExPh1MlRedundType=none (no ML redundancy) this object will be 'notApplicable'. When value is not 'none', it shoul… |
Enumerationr/w Constraints: range: 0-30 |
.1.3.6.1.4.1.164.3.2.3.2.2.1.1.21 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlRedundRecTime
Redundancy Recovery Time (sec). After switching the ML card
to the current (prtExPh1MlSltIdx), the next ML switch can be performed only after a minimum time, indicated by this object. |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.164.3.2.3.2.2.1.1.22 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlInbandMngRoutProt
This attribute indicates the Inband Mng routing protocol of
the port. |
Enumerationr/w Constraints: range: 0-10 |
.1.3.6.1.4.1.164.3.2.3.2.2.1.1.23 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlIfType
Interface type of the port.
For T1 - csu, dsu are the valid values For E1 - dsu, ltu are the valid values. |
Enumerationr/w Constraints: range: 0-10 |
.1.3.6.1.4.1.164.3.2.3.2.2.1.1.24 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlMultiplier
The data rate of each TS. The multiplier values
can be 56 kbps or 64 kbps. |
Enumerationr/w Constraints: range: 0-1800 |
.1.3.6.1.4.1.164.3.2.3.2.2.1.1.25 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlSupportedTS
Number of Supported Time Slots by the agent.
For Vmux-110 there is HW that supports less than 31/24 Time Slots for the E1/T1 port. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.2.1.1.26 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlImpedance
The Line Impedance.
For T1 (always balanced), impedance is 100 ohm. For E1: - balanced = 120 ohm - unbalanced = 75 ohm. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.1.1.27 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlQ50BwControl
This object enables configuration of Q.50 Bandwidth Control on the port.
If the bandwidth exceeds a certain threshold it is possible to disable new calls in the PBX via Q.50 protocol. Q.50 supports only E… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.1.1.28 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlQ50SignalPair
Q.50 Signaling bits Pair that is currently in use:
A&B bits or C&D bits. For Annex B it will always be: aAndB (2). |
Enumerationr/w Constraints: range: 0-16 |
.1.3.6.1.4.1.164.3.2.3.2.2.1.1.29 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlInternalSwitch
This parameter shows whether the data will be transferred from one port to
the other port within the same group of 2 ports. The default value is: Enable. Disable value might be necessary for security implementat… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.1.1.30 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlSigService
Signaling Service given by this link.
notApplicable - for T1 links normal - usual Signaling advanced - V5 Signaling. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.1.1.31 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlFragmentSize
This parameter indicates the maximum number of bytes permitted in a packet send over the Link.
Exceeding this size will cause packet fragmentation. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.2.1.1.32 |
prtExPh1MlTsTable
table.1.3.6.1.4.1.164.3.2.3.2.2.2
·
1 row entry
·
17 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry, except prtExPh1MlTsTest that will be written directly to the Active Configuration.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtExPh1MlTsCnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.2.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlTsSltIdx
This attribute indicates a unique slot position where
the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid. For the Vmux2100 Main Board notApplicable (255) is used. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.2.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlTsPrtIdx
This attribute indicates a unique port number.
MPH.1/E1 and MPH.1/T1 cards have only one external interface. exPrt2 - for ME1-2, MT1-2 and mhsPri cards. exPrt3, exPrt4 - for mhsPri cards. inPrt1 - for MTML-H/E1… |
Enumeration Constraints: range: 1-991 |
.1.3.6.1.4.1.164.3.2.3.2.2.2.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlTsIdx
This attribute indicates a unique time slot position.
The valid time slots are 1..24 for T1 Card and 1..31 for E1 interface. In G732S-E1 lines time slot 16 is not valid for data, it is dedicated for multiframe synchron… |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.2.2.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlTsIConSlot
This attribute indicates whether the specified time slot is
connected/routed internally in the Agent and to which card it is connected. In the ?004 Unit the entries io6(10)..io16) are not valid. split - will be used whe… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.2.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlTsIConPrt
This attribute indicates the internally (In Mux)
connected/routed port. For MP, the values will be: { exPrt1 (1) , exPrt2 (2) , exPrt3 (3) , exPrt4 (4) , exPrt5 (… |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.2.2.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlTsIConTs
This attribute indicates a unique time slot position.
The valid time slots are 1..24 for T1 Card and 1..31 for E1 interface. In G732S-E1 lines time slot 16 is not valid for data, it is dedicated to multiframe synchroni… |
SNMPv2-SMIInteger32r/w Constraints: range: 1-991Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.2.2.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlTsExt
A pointer to an extension of this table:
prtExTsSplitTable. - If prtExPh1MlTsIConSlot='split', its value should be set to the OBJECT IDENTIFIER of the prtExTsSplitTable, with its relevant CnfgIdx, SltIdx, PrtIdx, … |
ObjectIdentifier Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.2.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlTsTest
This attribute indicates a test to be activated on the selected TS.
It is applicable only when prtSTstCmd=testPerTS(31). notApplicable - when prtSTstCmd is NOT testPerTS(31). none - no test is applied for the selected … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.2.1.9 |
||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlTsType
The Time Slot Type.
Transparent - means that the Time Slot will be Rx/Tx as is without processing it. If the device requires more than 1 unique data or ss7 Time Slot, options with numbers c… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.2.1.10 |
||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlTsBundle
The number of the bundle containing this Time Slot.
If no bundle exists for this TS or the bundle number is irrelevant, the value will be 0. |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.2.2.1.11 |
||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlTsTestDuration
This attribute indicates the maximum duration of executing
a test on the specific TS. This entry applies to all the test operations. For the Vmux2100 the values are: 0 - 60 seconds. A zero… |
SNMPv2-SMIInteger32r/w Constraints: range: 1-8Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.2.2.1.12 |
||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlTsSubChType
The Time Slot Sub-Channel Type.
This variable is relevant only when Time-Slot Type is SubCh (e.g. prtExPh1MlTsType = subCh1...subCh8). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.2.1.13 |
||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlTsSubChMask
The Sub-Channel Type Mask.
This variable is relevant only when Time-Slot Type is SubCh (e.g. prtExPh1MlTsType = subCh1...subCh8). |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.2.2.1.14 |
||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlTsChRate
The Rate of the Signaling Channel.
notApplicable(1) when TS Type is other than Signaling or Transparent |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.2.2.1.15 |
||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlTsByteReversal
Byte Reversal.
This variable defines whether the LSB or MSB is transmitted first. no(2) - MSB is transmitted first yes(3) - LSB is transmitted first. |
Enumerationr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.2.3.2.2.2.1.16 |
||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPh1MlTsSigProfile
This object indicates the Signaling Profile of the port.
It is applicable only when prtMl4SigProfile=perTS. p1 = profile 1 p2 = profile 2 p3 = profile 3 p4 = profile 4 p5 = profile 5 |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.2.1.17 |
prtInPh1MlCnfgTable
table.1.3.6.1.4.1.164.3.2.3.2.2.3
·
1 row entry
·
24 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtInPh1MlCnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.3.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtInPh1MlSltType
This attribute indicates a unique slot position where
the card is inserted. For ISDN BRI port of MX300/30: io1(5) = isdn1(5) and io2(6) = isdn2(6) In the ?004 Unit the entries io6(10)..io12(16) are not valid |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.3.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtInPh1MlPrtIdx
This attribute indicates a unique port number.
MPH.1/E1 and MPH.1/T1 cards have three internal interfaces. MX3000 modules may have up to 50 internal ports. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.2.3.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtInPh1MlConnect
This attribute indicates whether the port should be
considered in any of the mux algorithms. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.3.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtInPh1MlRate
This attribute indicates the port speed.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.3.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtInPh1MlProtocol
This attribute indicates the applied protocol.
|
Enumerationr/w Constraints: range: 0-10 |
.1.3.6.1.4.1.164.3.2.3.2.2.3.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtInPh1MlConnectionTyp
This attribute indicates the link connection type.
It is required for three reasons: FR/CR Inband management operation (LMI,CLMM...). CIR check. NMS network management. SameNetManaged - indicates network … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.3.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtInPh1MlCongResponse
This attribute indicates how to handle the congestion indication
to/from the mux internal connection side (for example transmit/receive becn to/from the network). no - do nothing FlowControl - translate t… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.3.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtInPh1MlCongLevel
This attribute indicates the level of delayed data in
precents of the total available dynamic memory, for which the port will start to operate . The resolution of the parameter is 5 percent. Valid values: 10..70, 25… |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.2.3.1.9 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtInPh1MlTc
This attribute indicates the Tc parameter which is the time
period of the sliding window in which the Bc/Be are tested. The value of this parameter is identical for all the ports in the specific card. 255=notApplicable. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.3.1.10 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtInPh1MlFlowControl
This attribute indicates the required flow control betweeen
the port and the remote equipment. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.3.1.11 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtInPh1MlSegment
This object is the Segmentation in Bytes.
In protocol FR+, ISDN internals, MX 30/300 the segmentation is: 50 (2) ,158 (3) ,266 (4) ,376 (5), 484 (6) In MX 3000/4: For protocol FR+ (interna… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.3.1.12 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtInPh1MlFrMngProt
This object indicates the Frame-Relay management protocol.
ansiT1 = ANSI T1.617 Annex D (this is the default value). This parameter is applicable only for FR and FR+ protocols. When prtInPh1MlConnectionTyp = sameNetMana… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.3.1.13 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtInPh1MlEnqPeriod
This object is the Status Enquiry Period, in seconds.
It determines the frequency of the Status Enquiry message as sent by the FR user side. At the FR network side, it determines the timeout for this message reception. … |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.3.1.14 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtInPh1MlFullRptPeriod
This object is the Full Report Frequency.
It determines the number of the Status Enquiry messages sent by the FR user side, before a Full Report Request is sent. The units are : Status Enquiry messages (periods). Valid … |
Integer32r/w | .1.3.6.1.4.1.164.3.2.3.2.2.3.1.15 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtInPh1MlFrWindowSize
This object is the FR Window Size.
It determines the number of samplings in the sliding window that counts the errors. This parameter is applicable only for FR and FR+ protocols AND only when prtInPh1MlFrMngProt is NOT … |
Integer32r/w | .1.3.6.1.4.1.164.3.2.3.2.2.3.1.16 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtInPh1MlErrorsThreshold
This object is the Max Errors.
It determines the number of Status Enquiry Errors that occured within the FR sliding window, before this port is considered DOWN (threshold). This parameter is applicable only for FR and F… |
Integer32r/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.2.3.2.2.3.1.17 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtInPh1MlMaxIdleTime
Move to higher prioritized connected link after this period of
seconds of silence on the current link. 0=Never. Never move to higher prioritized connected link. UNIT is seconds. Valid values are: 0, 1, 2, 3, 4, 5, 10… |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.3.1.18 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtInPh1MlBearerCh
Defines which B (bearer) channels are used for transferring ISDN data.
Default value is: none (255). anyChannel (2) is skipped because it is not in use here. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.3.1.19 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtInPh1MlAssociatedExCh
This object indicates the external port associated to this internal
port. At present, it is used by the Hybrid (mp2100h), MHS-4 cards which can have up to 64 dynamic internal ports associated with External ports. … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.3.1.20 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtInPh1MlClockEncoding
This object is the Encoding type of the Line.
This parameter is applicable only for FR and FR+ protocols. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.3.1.21 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtInPh1MlMinSeparators
Minimum number of bytes separating between two adjacent frames (HDLC item).
0 = notApplicable |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.3.1.22 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtInPh1MlCcittCrc
This object indicates how many Bits are used for CRC (HDLC item).
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.3.1.23 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtInPh1MlFrameSeparator
This object indicates what should be transferred on the line when there
are no frames to pass (HDLC item). idles: mean that FF will pass on the line flags: mean that 7E will pass on the line. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.3.1.24 |
prtInPh1MlDlciTable
table.1.3.6.1.4.1.164.3.2.3.2.2.4
·
1 row entry
·
14 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtInPh1MlDlciCnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.4.1.1 |
||||||||||
|
prtInPh1MlDlciSltIdx
This attribute indicates a unique slot position where
the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid |
Enumeration Constraints: range: 0-70 |
.1.3.6.1.4.1.164.3.2.3.2.2.4.1.2 |
||||||||||
|
prtInPh1MlDlciPrtIdx
This attribute indicates a unique internal port number.
MPH.1/E1 and MPH.1/T1 cards have three internal ports. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.4.1.3 |
||||||||||
|
prtInPh1MlDlciIdx
This attribute indicates a unique index for each possible
used dlci(16..991). When the protocol is not Multiplexing protocol, then its type is 'user' and the only valid index is 1. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.4.1.4 |
||||||||||
|
prtInPh1MlDlciValid
This attribute indicates whether the attributes in this entry
are valid or not. The user can add/delete pvc (dlci to dlci connection) by modifing this object |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.4.1.5 |
||||||||||
|
prtInPh1MlDlciIConSlt
This attribute indicates a unique slot position In the Mux
(Agent) where the dlci is routed to. In the ?004 Unit the entries io6(10)..io16) are not valid |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.4.1.6 |
||||||||||
|
prtInPh1MlDlciIConPrt
This attribute indicates a unique port id which the dlci is
routed to. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.4.1.7 |
||||||||||
|
prtInPh1MlDlciIConDlci
This attribute indicates a unique internal connection dlci
number which the src dlci is routed to. |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.4.1.8 |
||||||||||
|
prtInPh1MlDlciTxBc
This attribute indicates a unique Tx committed bandwidth on
the user transmit line or at the port receive line. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.4.1.9 |
||||||||||
|
prtInPh1MlDlciTxBe
This attribute indicates a unique Tx excess bandwidth on the
user transmit line or at the port receive line. |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.2.4.1.10 |
||||||||||
|
prtInPh1MlDlciRxBc
This attribute indicates a unique Rx committed bandwidth on
the user receive line or at the port transmit line. |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.2.4.1.11 |
||||||||||
|
prtInPh1MlDlciRxBe
This attribute indicates a unique Rx excess bandwidth on the
user receive line or at the port transmit line. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.4.1.12 |
||||||||||
|
prtInPh1MlDlciPriority
This attribute indicates a unique priority of the pcv.
1 is the lowest priority and 8 is the highest priority. |
Integer32r/w Constraints: range: 1-30 |
.1.3.6.1.4.1.164.3.2.3.2.2.4.1.13 |
||||||||||
|
prtInPh1MlDlciStatus
This attribute indicates the status of the pvc. The status is
disconnected(1) when one of the sides is programmed as not connected |
Enumeration Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.2.3.2.2.4.1.14 |
prtPhMlCnfgTable
table.1.3.6.1.4.1.164.3.2.3.2.2.5
·
1 row entry
·
18 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtPhMlCnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.5.1.1 |
||||||||||||||||||||||||||||||||||||||||||||
|
prtPhMlSltIdx
This attribute indicates a unique slot position where
the module is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. For the Vmux2100 Main Board notApplicable (1) is used. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.5.1.2 |
||||||||||||||||||||||||||||||||||||||||||||
|
prtPhMlPrtIdx
This attribute indicates a unique port number.
ML-20 cards have just one external interface. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.5.1.3 |
||||||||||||||||||||||||||||||||||||||||||||
|
prtPhMlConnect
This attribute indicates whether the port should be considered
in any of the mux algorithms. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.5.1.4 |
||||||||||||||||||||||||||||||||||||||||||||
|
prtPhMlRate
This attribute indicates the configured port speed.
auto - rate is adapted automatically to the attached modem rate. |
Enumerationr/w Constraints: range: 0-16 |
.1.3.6.1.4.1.164.3.2.3.2.2.5.1.5 |
||||||||||||||||||||||||||||||||||||||||||||
|
prtPhMlCAS
This attribute indicates whether Channel Associated
Signaling (CAS) is used. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.5.1.6 |
||||||||||||||||||||||||||||||||||||||||||||
|
prtPhMlClockMode
Clock mode.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.5.1.7 |
||||||||||||||||||||||||||||||||||||||||||||
|
prtPhMlSatBuffer
Satellite Buffer (+/- 256).
|
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.2.5.1.8 |
||||||||||||||||||||||||||||||||||||||||||||
|
prtPhMlDialProcess
Dial Process.
|
Enumerationr/w Constraints: range: 0-1000 |
.1.3.6.1.4.1.164.3.2.3.2.2.5.1.9 |
||||||||||||||||||||||||||||||||||||||||||||
|
prtPhMlSyncRestore
Sync Restoration time, in seconds.
notApplicable=0. |
Integer32r/w | .1.3.6.1.4.1.164.3.2.3.2.2.5.1.10 |
||||||||||||||||||||||||||||||||||||||||||||
|
prtPhMlBus
The TDM BUS this port is linked to.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.2.5.1.11 |
||||||||||||||||||||||||||||||||||||||||||||
|
prtPhMlMfSyncSlot
This attribute indicates whether the sync is synchronized
according to a certain card and the slot of this card. This operation is required in order to bypass signaling of PCM voice channels. In the ?004 Unit the entrie… |
Enumerationr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.2.3.2.2.5.1.12 |
||||||||||||||||||||||||||||||||||||||||||||
|
prtPhMlClockSource
The Clock Source: TC (Tx Clock) or RC (Rx Clock) signals.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.5.1.13 |
||||||||||||||||||||||||||||||||||||||||||||
|
prtPhMlErrCorrection
This object indicates if Error Correction mechanism should be applied or not.
It will be applicable only if the interface HW includes the Error Correction chip. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.5.1.14 |
||||||||||||||||||||||||||||||||||||||||||||
|
prtPhMlCorrectionMode
This object is applicable only when prtPhMlErrCorrection=yes.
random - enables to correct up to 3 random errors in an 23 bit frame built from 12 data bits and 11 appended parity bits. bursty - interleaving 3 fr… |
Enumerationr/w Constraints: range: 1-991 |
.1.3.6.1.4.1.164.3.2.3.2.2.5.1.15 |
||||||||||||||||||||||||||||||||||||||||||||
|
prtPhMlControlSignals
This object shows whether the Port will ignore or implement the control signals
like DCD, CTS, DTR. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.5.1.16 |
||||||||||||||||||||||||||||||||||||||||||||
|
prtPhMlInterfaceType
The SW Configurable Interface Type.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.5.1.17 |
||||||||||||||||||||||||||||||||||||||||||||
|
prtPhMlClockPolarity
This object indicates the clock polarity.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.2.5.1.18 |
prtExPhPlCnfgTable
table.1.3.6.1.4.1.164.3.2.3.2.3.1
·
1 row entry
·
35 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtExPhPlCnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.3.1.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPhPlSltIdx
This attribute indicates a unique slot position where
the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.3.1.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPhPlPrtIdx
This attribute indicates a unique port number.
In case of PH.1 card, only exPrt(1) is valid. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.3.1.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPhPlConnect
This attribute indicates whether the port should be considered
in any of the mux algorithms. |
Enumerationr/w Constraints: range: 1-8 |
.1.3.6.1.4.1.164.3.2.3.2.3.1.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPhPlHRate
This attribute indicates the port speed for HIGH speed cards.
The card has limitations about the maximum sigma channel speeds and about the possible rates for each clock mode . N - The rate is valid for DCE and EXT-DCE … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.3.1.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPhPlLRate
This attribute indicates the port speed for LOW speed cards.
The card has limitations about the possible rates for each clock mode. N - The rate is valid for DCE and EXT-DCE Nodal clock mode. L - The rate is valid for D… |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPhPlProtocol
This object indicates the applied protocol.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPhPlConnectionTyp
This attribute indicates the link connection type.
It is required for three reasons: FR/CR Inband management opration (LMI,CLMM...). CIR check. NMS network management. SameNetManaged - indicates network i… |
Enumerationr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.2.3.2.3.1.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPhPlClkMode
Clock mode.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.3.1.1.9 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPhPlDceClkSrc
This attribute indicates the source of the clock when working
in dce or ext-dce clock mode. notApplicable(1) - is applied for dte(3) and lbt(5) clock modes. When clock mode is dte, the clock sourc… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.3.1.1.10 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPhPlCongResponse
This attribute indicates how to handle the congestion indication
to/from the mux internal connection side (for example transmit/received becn to/from the network). no - do nothing flowControl - translates… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.3.1.1.11 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPhPlCongLevel
This attribute indicates the level of delayed data in
precents of total available dynamic memory, for which the port will start to operate as congested. The resolution of the parameter is 5 percent. |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.3.1.1.12 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPhPlTc
This attribute indicates the Tc parameter which is the time
period of the sliding window in which the Bc/Be are tested. The value of this parameter is identical for all the ports of a specific card . |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.13 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPhPlFlowControl
This attribute indicates the required flow control betweeen
the port and the remote equipment. fecnBecn - is valid only for FR, FR+ and CR protocols. xonXoff,dtrCts - are valid only for Async protocols. speedReduction -… |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.14 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPhPlDcdRts
Protocol may require end to end connect indication over the
network. End to end link connection establishment over the FR network will be indicated to the user by using DCD or RTS control signals, depending on the clock… |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.15 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPhPlDcdRtsControlPath
Protocol may require end to end connect indication over the
network. This parameter defines whether to take the user connection status (RTS(DCE)/DCD(DTE)) and forward it to the network side. - on : Transmit active conne… |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.16 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPhPlDataBits
This attribute indicates the number of data bits in async
frame. It is relevant only for Async protocols. |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.17 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPhPlParity
This attribute indicates the parity operation mode in
async frame. It is relevant only for Async protocols. |
Enumerationr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.2.3.2.3.1.1.18 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPhPlStopBits
This attribute indicates the minimum number of stop bits
in the tx async frame. It is relevant only for Async protocols. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.3.1.1.19 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPhPlLXon
This attribute indicates the character used as X-On to
notify receive enable. This parameter is valid only for async protocols. Valid values: 0..255. The value 256 indicates that it's not applicable |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.3.1.1.20 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPhPlLXoff
This attribute indicates the character used as X-Off to
notify receive disable. This parameter is valid only for async protocols. Valid values: 0..255. The value 256 indicates that it's not applicable |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.3.1.1.21 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPhPlFrMngProt
This object indicates the Frame-Relay management protocol.
ansiT1 = ANSI T1.617 Annex D (this is the default value). This parameter is applicable only for FR and FR+ protocols. When prtExPhPlConnectionTyp = sameNetManag… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.3.1.1.22 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPhPlEnqPeriod
This object is the Status Enquiry Period, in seconds.
It determines the frequency of the Status Enquiry message as sent by the FR user side. At the FR network side, it determines the timeout for this message reception. … |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.3.1.1.23 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPhPlFullRptPeriod
This object is the Full Report Frequency.
It determines the number of the Status Enquiry messages sent by the FR user side, before a Full Report Request is sent. The units are : Status Enquiry messages (periods). Valid … |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.3.1.1.24 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPhPlFrWindowSize
This object is the FR Window Size.
It determines the number of samplings in the sliding window that counts the errors. This parameter is applicable only for FR and FR+ protocols AND only when prtExPhPlFrMngProt is NOT (… |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.3.1.1.25 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPhPlErrorsThreshold
This object is the Max Errors.
It determines the number of Status Enquiry Errors that occured within the FR sliding window, before this port is considered DOWN (threshold). This parameter is applicable only for FR and F… |
Integer32r/w Constraints: range: 0-24 |
.1.3.6.1.4.1.164.3.2.3.2.3.1.1.26 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPhPlPvcCreateMsg
This object is Update Message (if required or not).
It determines whether a message of a New PVC Creation is requested or not (yes/no). Default = no. This parameter is applicable only for FR and FR+ protocols AND only w… |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.27 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPhPlCllmMsg
This object is CLLM Message (if required or not).
It determines whether to send (or not) a congestion message when the port is Rx congested. Default = no. This parameter is applicable only for FR and FR+ protocols AND o… |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.28 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPhPlProtDelayLevel
This object is the Segmentation in Bytes.
In some cases, the enumerated values will mean other segmentation values than specified: Product: MX-3000 MX-3000 MX-300/MX-30 Protocol: … |
Enumerationr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.2.3.2.3.1.1.29 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPhPlClockEncoding
This object is the Encoding type of the Line.
This parameter is applicable only for FR and FR+ protocols. For MAXCESS 3000 & MP2100H: when setting to nrzI (3) the nrzI works as nrzI Mark. For MAXCESS 30/300 when setting… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.3.1.1.30 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPhPlMinSeparators
Minimum number of bytes separating between two adjacent frames (HDLC item).
0 = notApplicable |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.3.1.1.31 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPhPlCcittCrc
This object indicates how many Bits are used for CRC (HDLC item).
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.3.1.1.32 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPhPlFrameSeparator
This object indicates what should be transferred on the line when there
are no frames to pass (HDLC item). idles: mean that FF will pass on the line flags: mean that 7E will pass on the line. |
Enumerationr/w Constraints: range: 1-12 |
.1.3.6.1.4.1.164.3.2.3.2.3.1.1.33 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPhPlIdleCode
Determines the code for transmission when there are no frames to transmit
on the line. The value should be 0 to FFH. |
SNMPv2-SMIInteger32r/w Constraints: range: 1-4Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.3.1.1.34 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPhPlJitter
Maximum variant delay of the FR network, in msec.
|
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.3.1.1.35 |
prtExPhPlDlciTable
table.1.3.6.1.4.1.164.3.2.3.2.3.2
·
1 row entry
·
14 columns
The write operation into the Table Objects is valid only at the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtExPhPlDlciCnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg. |
Integer32 | .1.3.6.1.4.1.164.3.2.3.2.3.2.1.1 |
||||||||||||||||||||||||||
|
prtExPhPlDlciSltIdx
This attribute indicates a unique slot position where
the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid |
Enumeration Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.2.3.2.3.2.1.2 |
||||||||||||||||||||||||||
|
prtExPhPlDlciPrtIdx
This attribute indicates a unique internal port number.
PH.1/E1 and PH.1/T1 cards have three internal ports. Stand-alone units may have six such ports. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.3.2.1.3 |
||||||||||||||||||||||||||
|
prtExPhPlDlciIdx
This attribute indicates a unique index for each possible
used dlci(16..991). When the protocol is not Multiplexing protocol, its type is 'user' and the only valid index is 1. |
Integer32 | .1.3.6.1.4.1.164.3.2.3.2.3.2.1.4 |
||||||||||||||||||||||||||
|
prtExPhPlDlciValid
This attribute indicates whether the attributes in this
entry are valid or not. The user can add/delete pvc (dlci to dlci connection) by modifing this object |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.3.2.1.5 |
||||||||||||||||||||||||||
|
prtExPhPlDlciIConSlt
This attribute indicates a unique slot position In the Mux
(Agent) where the dlci is routed to. cl - will represent any of the CL slots. This value can be selected for multiple DLCIs of the product. In the ?004 Unit t… |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.3.2.1.6 |
||||||||||||||||||||||||||
|
prtExPhPlDlciIConPrt
This attribute indicates a unique port id which the dlci is
routed to. clNMS - will be used for NMS SNMP messages. It can be any port of the CL card. This value will be selectable only if prtExPh… |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.3.2.1.7 |
||||||||||||||||||||||||||
|
prtExPhPlDlciIConDlci
This attribute indicates a unique internal connection dlci
number, the dlci is routed to. |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.3.2.1.8 |
||||||||||||||||||||||||||
|
prtExPhPlDlciTxBc
This attribute indicates a unique Tx committed bandwidth on
the user transmit line (or at the port receive line). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.3.2.1.9 |
||||||||||||||||||||||||||
|
prtExPhPlDlciTxBe
This attribute indicates a unique Tx excess bandwidth on the
user transmit line (or at the port receive line). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.3.2.1.10 |
||||||||||||||||||||||||||
|
prtExPhPlDlciRxBc
This attribute indicates a unique Rx committed bandwidth on the
user receive line (or at the port transmit line). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.3.2.1.11 |
||||||||||||||||||||||||||
|
prtExPhPlDlciRxBe
This attribute indicates a unique Rx excess bandwidth on the
user receive line (or at the port transmit line). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.3.2.1.12 |
||||||||||||||||||||||||||
|
prtExPhPlDlciPriority
This attribute indicates a unique priority of the pcv.
1 is the lowest priority and 8 is the highest priority. |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.3.2.1.13 |
||||||||||||||||||||||||||
|
prtExPhPlDlciStatus
This attribute indicates the status of the pvc. The status is
disconnected(1) when one of the sides is programmed as not connected |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.3.2.1.14 |
prtExPhPlModemTable
table.1.3.6.1.4.1.164.3.2.3.2.3.3
·
1 row entry
·
8 columns
External Modem Parameters. The write operation into the Table Objects is valid only for the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtExPhPlModemCnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.3.3.1.1 |
||||||||||||||||||
|
prtExPhPlModemSltIdx
This attribute indicates a unique slot position where
the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.3.3.1.2 |
||||||||||||||||||
|
prtExPhPlModemPrtIdx
This attribute indicates a unique port number.
In case of PH.1 card, only exPrt(1) is valid. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.3.3.1.3 |
||||||||||||||||||
|
prtExPhPlModemStatus
This object indicates whether a Dial Up Modem is enabled on this port.
Default: disable For Vmux devices this object shows whether there is Modem Relay support. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.3.3.1.4 |
||||||||||||||||||
|
prtExPhPlModemActivate
This object indicates whether the Dial Up Modem is activated when
the first frame is received or it is always activated. Default: onFirstFrame |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.3.3.1.5 |
||||||||||||||||||
|
prtExPhPlModemMaxIdleTime
Max Time allowed in Seconds without any traffic before the line
is disconnected. Legal Values are: 1 sec, 2 sec .. 5 sec, 10 sec, 20 sec.. 1 min, 2 min .. 10 min, 15 min, 20 min, 25 min, 30 min. 65535 sec… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.3.3.1.6 |
||||||||||||||||||
|
prtExPhPlModemTimeBtwnCalls
Minimum Time in Seconds which is required after a call was
disconnected. In this time no other call will be initiated from this Modem port even if there were frames transmitted to this port. This time is required for so… |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.3.3.1.7 |
||||||||||||||||||
|
prtExPhPlModemCallDelay
Time in Seconds that the device will wait before dialing to the remote
device. This feature is mostly used when there is a backup modem to the main link and the main link is down. In this case it is impo… |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.3.3.1.8 |
prtExLs2CnfgTable
table.1.3.6.1.4.1.164.3.2.3.2.4.1
·
1 row entry
·
9 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtExLs2CnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.4.1.1.1 |
||||||||||||
|
prtExLs2SltIdx
This attribute indicates a unique slot position where
the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.4.1.1.2 |
||||||||||||
|
prtExLs2PrtIdx
This attribute indicates a unique port index.
For the Ls2/X.58 exPrt(7)..exPrt(10) are not valid. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.4.1.1.3 |
||||||||||||
|
prtExLs2Connect
This attribute indicates whether the port should be
considered in any of the mux algorithms. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.4.1.1.4 |
||||||||||||
|
prtExLs2Rate
Port rates.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.4.1.1.5 |
||||||||||||
|
prtExLs2ClkMode
This attribute indicates a unique port operation clock mode.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.4.1.1.6 |
||||||||||||
|
prtExLs2Cts
CTS.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.4.1.1.7 |
||||||||||||
|
prtExLs2Dcd
DCD.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.4.1.1.8 |
||||||||||||
|
prtExLs2EnvIdx
Envelope Index.
When prtInLs2EnvAssign=auto, the value is 0 (not applicable). |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.4.1.1.9 |
prtInLs2CnfgTable
table.1.3.6.1.4.1.164.3.2.3.2.4.2
·
1 row entry
·
8 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtInLs2CnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.4.2.1.1 |
||||||||||||||||||||||||
|
prtInLs2SltIdx
This attribute indicates a unique slot position where
the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.4.2.1.2 |
||||||||||||||||||||||||
|
prtInLs2PrtIdx
This attribute indicates a unique internal port index.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.4.2.1.3 |
||||||||||||||||||||||||
|
prtInLs2Connect
This attribute indicates whether the port should be considered in
any of the mux algorithms. It also affects all the module considerations because the module has only one Internal interface which is the composite chann… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.4.2.1.4 |
||||||||||||||||||||||||
|
prtInLs2Group
This attribute indicates the group number of the port.
LS-2 internal ports with the same group number share the same Time slot of the main link |
Integer32r/w | .1.3.6.1.4.1.164.3.2.3.2.4.2.1.5 |
||||||||||||||||||||||||
|
prtInLs2Member
This attribute indicates the group member id of the port.
This parameter is for the automatic envelope assignment algorithm. |
Integer32r/w | .1.3.6.1.4.1.164.3.2.3.2.4.2.1.6 |
||||||||||||||||||||||||
|
prtInLs2LinkTo
deprecated
It indicates the slot of the main link card to which the
LS2 card is mapped. STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot and prtGenCnfgLinkToPort. |
Enumerationr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.2.3.2.4.2.1.7 |
||||||||||||||||||||||||
|
prtInLs2EnvAssign
Envelope assignment type.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.4.2.1.8 |
prtVc2CnfgTable
table.1.3.6.1.4.1.164.3.2.3.2.5
·
1 row entry
·
40 columns
- For products supporting more than one configuration, the write operation into the Table is valid only to the TmpCnfg entry. - For products that do not support configurations, the write operation into the Table will be to prtVc2CnfgIdx=1.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtVc2CnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.5.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtVc2SltIdx
This attribute indicates a unique slot position where
the card is inserted. For Stand Alone products like WR: notApplicable (255) |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.5.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtVc2PrtIdx
A unique identifier of the port, within the card.
For MP-2100/2200 card ports, Web Ranger and FCD-IP Voice ports the values will be: exPrt1 (1) exPrt2 (2) exPrt3 (3) exPrt4 (4) exPrt5 (5) exPrt6… |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.5.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExVc2Connect
This attribute indicates whether the port should be
considered in any of the mux algorithms. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.5.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExVc2TransGain
Transmit gain in dBm.
For ports of MP-104/204, MP-2100/2200 VC-6A, VC-6AG, VC-8 VC-4/Omni and VC-16 cards, the units will be 0.1dBm because valid values can be in 0.5dBm steps. |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.5.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExVc2ReceiveGain
Receive gain in dBm.
For ports of MP-104/204, MP-2100/2200 VC-6A, VC-6AG, VC-8 VC-4/Omni and VC-16 cards, the units will be 0.1dBm because valid values can be in 0.5dBm steps. |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.5.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExVc2Wire
For some cards, this object is equal for all the ports in the specific
card because of HW limitations. For FXO & FXS this parameter is not applicable. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.5.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExVc2CodingLaw
This attribute indicates the Method/Law for decoding/encoding the voice
information. aLaw(1) is the standard Law for E1 links. uLaw(2) is the standard Law for T1 links. This object is equal for all the po… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.5.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExVc2Sig
This attribute indicates the method for decoding/encoding the signaling
information(on/off hook). noSignaling (1) - not using signaling (only voice). robbedBitMultiFrame(2) - is the standard method for T1 links a… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.5.1.9 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExVc2Oos
This object is equal for all the ports in the specific card
because of HW limitations |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.5.1.10 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExVc2LinkTo
deprecated
This attribute indicates the slot of the ML card to which
the VC card is mapped. STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot and prtGenCnfgLinkToPort. |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.5.1.11 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExVc2OperMode
This object indicates the operation mode of the port.
normal = bi-directional (Tx/Rx) unidirectRx = unidirectional Rx. broadcast = Tx upon request. |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.5.1.12 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExVc2SigProfile
This object indicates the Signaling Profile of the port.
notApplicable - for VC-2 family and when prtExVc2Sig=noSignaling(1) p1 = profile 1 p2 = profile 2 p3 = profile 3 p4 = profile 4 |
Enumerationr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.2.3.2.5.1.13 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExVc2CallEnable
This object indicates the Enabled Call direction.
notApplicable - for all cards except VC-2/R2. both - incoming + outgoing. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.5.1.14 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExVc2R2Delay
This object indicates the R2 Delay.
notApplicable - for all cards except VC-2/R2. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.5.1.15 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExVc2CasStd
This object indicates the CAS (Channel Associated Signaling)
Standard. notApplicable - for all cards except VC-2/R2. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.5.1.16 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExVc2EchoCanceler
Echo canceler activation.
notApplicable - for VC-2 and VC-6 cards. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.5.1.17 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExVc2IfType
Interface Type.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.5.1.18 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExVc2Encoding
Voice Encoding Mode.
linear - is relevant only for the ports of VC-16A card. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.5.1.19 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExVc2TxBitCode
- - - For MP & FCD - - -
This object represents 4 parameters, by 2 Octets : Tx D Bit Code-MSB nibble, Tx C Bit Code- nibble, Tx B Bit Code- nibble, Tx A Bit Code-LSB nibble. Each nibb… |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.5.1.20 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExVc2RxBitOutput
- - - For MP (VC-Q card only) & FCD - - -
This object represents 3 parameters by 2 Octets: Spare -MSB nibble, always=0 hex E Lead Output - nibble, Reverse Polarity Output- nibble, Metering Pulse Ou… |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.5.1.21 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExVc2MeterRate
This entry is applicable only for VC-6A/FXO, VC-6A/FXS, VC-8/FXO,
VC-8/FXS, VC-16/FXO and VC-16/FXS. Meter Rate means rate of Call Meter in Public Phones, in KHz units. For some cards, the value must be the same for all… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.5.1.22 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExVc2IfSignaling
This entry is applicable only for VC-6A, VC-6AG, VC-8/FXO, VC-8/FXS,
VC-16/FXO and VC-16/FXS cards. Interface Analog Signaling. Must be the same for all card's ports. loopStart - for the usual trunk/phone types. groundS… |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.5.1.23 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExVc2SeizeAck
This parameter shows whether the device will acknowledge
a seize signal (On/Off Hook). When the value is set to yes(3) & the device receives an on/off hook signal it will transmit back an on/off hook signal. When th… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.5.1.24 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExVc2EandMType
This is the signaling type on the E&M analog side.
The analog signaling includes voltage, no. of pins and other parameters. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.5.1.25 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExVc2RemType
Remote Type.
Applicable for VC-6A/4LB card & for IPMUX-1E Far End Type - E1,T1(T1-ESF) or T1-D4 . |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.5.1.26 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExVc2ConvTime
Conversation Time in minutes.
Applicable for VC-6A/4LB card. |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.5.1.27 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExVc2SigFeedback
Signaling Feedback.
Applicable for VC-8/FXO and VC-16/FXO cards. |
Enumerationr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.2.3.2.5.1.28 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExVc2EchoCancelerModule
This parameter indicates whether Echo canceler module exists for this port.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.5.1.29 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExVc2ReversePolarity
This object Enables/Disables Reverse Polarity for this port.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.5.1.30 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExVc2RingerFrequency
This object selects the Ringer Frequency (Hz) for this port.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.5.1.31 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExVc2SigService
Signaling Service.
advanced - is relevant only for ports of VC-8, VC-16 FXS cards. It is used for Signaling Services of V5.1 or R2. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.5.1.32 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExVc2CallerIdEnable
This object Enables/Disables Receiving the Caller Id number from the
remote side, for this port/channel. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.5.1.33 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExVc2CompressMethod
This object is applicable only when prtExVc2Encoding=adpcm.
It defines which method is used for Compression. g726 - for 4 bits (the standard method). g726 - for 3 bits. It is especially needed for T1 applications with s… |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.5.1.34 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExVc2ObMode
This object defines the Net operation mode of the Omni-Bus card's port.
pointToPoint - only 2 end-point ports talk; like any other voice card omniBus - many talk and listen. Like conference call. Al… |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.5.1.35 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExVc2VAD
This object defines whether Voice Activation Detector (VAD)
will be On or Off. off - will be usually selected when a Modem is connected to the port; not a phone. notApplicable - when prtExVc2DspMode=pointT… |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.5.1.36 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExVc2NoiseLevelForVAD
This object defines the Level of Noise on the line,
the Voice Activation Detector (VAD) will have to deal with. notApplicable - when prtExVc2VAD=off. |
Enumerationr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.2.3.2.5.1.37 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExVc2WesternSigMode
This object defines the Western Signaling Mode.
detector - detects signal and passes it as is. generator - generates the signal. notApplicable - when Western HW is not installed. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.5.1.38 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExVc2BusProtectionPoint
This object defines if the port is Bus Protection Point or not.
notApplicable - when prtExVc2DspMode=pointToPoint. When we have a chain of devices where the edge devices ports are the Bus Protection Point, user must co… |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.5.1.39 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExVc2ImpedanceStandard
This object defines the Standard used for Impedance.
-G.712 - 600 Ohm - used in USA and other countries. -Q552/ETSI - used in some countries in Europe -Q522/Italy - used in Italy. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.5.1.40 |
prtHsfCnfgTable
table.1.3.6.1.4.1.164.3.2.3.2.6
·
1 row entry
·
14 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtHsfCnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relate to the TmpCnfg. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.6.1.1 |
||||||||||||||||||||||||||||||||
|
prtHsfSltIdx
This attribute indicates a unique slot position where
the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.6.1.2 |
||||||||||||||||||||||||||||||||
|
prtHsfPrtIdx
This attribute indicates a unique external port index.
Hs2 has only two ports (exPrt1,exPrt2). Hs3 has three ports (exPrt1,exPrt2,exPrt3). Hsq and hsqN has four ports. Hs6 has six external ports. Hs12 has twelve extern… |
Enumeration | .1.3.6.1.4.1.164.3.2.3.2.6.1.3 |
||||||||||||||||||||||||||||||||
|
prtExHsfConnect
This attribute indicates whether the port should be
considered in any of the mux algorithms. |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.6.1.4 |
||||||||||||||||||||||||||||||||
|
prtExHsfRate
This attribute indicates the port speed.
|
Enumerationr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.2.3.2.6.1.5 |
||||||||||||||||||||||||||||||||
|
prtExHsfClkMode
This attribute indicates a unique port operation clock mode.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.6.1.6 |
||||||||||||||||||||||||||||||||
|
prtExHsfCts
This attribute indicates a unique CTS control line
operation mode. |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.6.1.7 |
||||||||||||||||||||||||||||||||
|
prtExHsfFifoSize
Size in bits.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.6.1.8 |
||||||||||||||||||||||||||||||||
|
prtExHsfLinkTo
deprecated
This attribute indicates a slot of Main Link module, that the
port is linked to. This object is the same for all the ports in the specific card because of HW limitations. STATUS deprecated - this object is replaced by … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.6.1.9 |
||||||||||||||||||||||||||||||||
|
prtExHsfOperMode
This object indicates the operation mode of the port.
normal = bi-directional (Tx/Rx) unidirectRx = unidirectional Rx. broadcast = Tx upon request. bidirBcastRing = Bidirectional Broadcast Ring. When this value is selec… |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.6.1.10 |
||||||||||||||||||||||||||||||||
|
prtExHsfInbandLoopback
This object indicates if Inband Loopback from the Network
should be enabled or disabled. |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.6.1.11 |
||||||||||||||||||||||||||||||||
|
prtExHsfClkPolarity
This object indicates the clock polarity.
For FCD-M this object will be applicable only for the fixed HS port (the fixed port on the device). |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.6.1.12 |
||||||||||||||||||||||||||||||||
|
prtExHsfControlSignal
This object indicates the Control Signal according to G.797 ITU-T standard.
For FCD-M this object will be applicable for the fixed HS port (the fixed port on the device) and HS-Q/N channels. Local and End to End are app… |
Enumerationr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.2.3.2.6.1.13 |
||||||||||||||||||||||||||||||||
|
prtExHsfBcastRingSrcPort
This object is applicable only when prtExHsfOperMode=
bidirBcastRing. In this case, the values mean: - none - this port will be connected to ML in TSA as usual. - exPrt1.. exPrtX ; X=maximum ports of the card in focus … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.6.1.14 |
prtExHs4CnfgTable
table.1.3.6.1.4.1.164.3.2.3.2.7.1
·
1 row entry
·
13 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtExHs4CnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.7.1.1.1 |
||||||||||||||||||||||
|
prtExHs4SltIdx
This attribute indicates a unique slot position where
the card is inserted. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.7.1.1.2 |
||||||||||||||||||||||
|
prtExHs4PrtIdx
A unique identifier of the port, within the card.
|
Enumeration | .1.3.6.1.4.1.164.3.2.3.2.7.1.1.3 |
||||||||||||||||||||||
|
prtExHs4Connect
This attribute indicates whether the port should be
considered in any of the mux algorithm. It also affects all the module considerations because the card has only one external (physical) interface. |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.7.1.1.4 |
||||||||||||||||||||||
|
prtExHs4LineType
This attribute is the line type parameter for T1/E1
interface. The user should select only the parameters relevant to the specific card: T1 line code parameters for the HS-4/1 and E1 line code parameters for the HS-4/2.… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.7.1.1.5 |
||||||||||||||||||||||
|
prtExHs4LineCode
This attribute is the line code parameter used for T1/E1
interface. The user should select only the parameters relevant to the specific card: T1 line code parameters for the MPH.1/T1 and E1 line code parameters for the … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.7.1.1.6 |
||||||||||||||||||||||
|
prtExHs4LineLen
This attribute is the line length parameter used only for
T1 interfaces. len399p533ft=len-399-533ft |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.7.1.1.7 |
||||||||||||||||||||||
|
prtExHs4RestoreT
Time passing from the disappearance of the loss of
synchronization condition (red alarm), to the restoration of normal service. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.7.1.1.8 |
||||||||||||||||||||||
|
prtExHs4OosSig
Out of Service signal type.
|
Enumerationr/w Constraints: range: 0-300 |
.1.3.6.1.4.1.164.3.2.3.2.7.1.1.9 |
||||||||||||||||||||||
|
prtExHs4OosCode
OOS Code
|
Enumerationr/w Constraints: range: 0-70 |
.1.3.6.1.4.1.164.3.2.3.2.7.1.1.10 |
||||||||||||||||||||||
|
prtExHs4IdleCode
Type value(00 - FF HEX), excluding 0H,8H,10H,12H,21H,24H,
42H,49H,84H,92H |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.7.1.1.11 |
||||||||||||||||||||||
|
prtExHs4MfClkSrcSlt
This attribute indicates whether the port Tx is multiframe
synchronized with Rx multiframe of another port and the slot position of that port. This opration is required in order to bypass signaling of PCM voice channels… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.7.1.1.12 |
||||||||||||||||||||||
|
prtExHs4MfClkSrcPrt
A unique number to identify a port position in the mux if the
MultiFrame clock source is valid (YES). inPrt1 - for MTML-H/E1 cards. |
Enumerationr/w Constraints: range: 2-2 |
.1.3.6.1.4.1.164.3.2.3.2.7.1.1.13 |
prtExHs4TsCnfgTable
table.1.3.6.1.4.1.164.3.2.3.2.7.2
·
1 row entry
·
7 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtExHs4TsCnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg. |
Integer32 Constraints: range: 0-10 |
.1.3.6.1.4.1.164.3.2.3.2.7.2.1.1 |
||||||||||||||||
|
prtExHs4TsSltIdx
This attribute indicates a unique slot position where
the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.7.2.1.2 |
||||||||||||||||
|
prtExHs4TsPrtIdx
This attribute indicates a unique port number.
Hs4/T1 and Hs4/T1 cards have only one external interface. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.7.2.1.3 |
||||||||||||||||
|
prtExHs4TsIdx
This attribute indicates a unique time slot position.
The valid time slots are: 1..24 for T1 Card and 1..31 for E1 interface. In G732S-E1 lines, time slot 16 is not valid for data, it is dedicated to multiframe synchro… |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.7.2.1.4 |
||||||||||||||||
|
prtExHs4TsIConSlot
This attribute indicates whether the specified time slot is
connected/routed internally in the Agent and to which card it is connected. In the ?004 Unit the entries io6(10)..io16) are not valid. split - will be used whe… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.7.2.1.5 |
||||||||||||||||
|
prtExHs4TsIConPrt
This attribute indicates the internally (In Mux)
connected/routed port. |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.7.2.1.6 |
||||||||||||||||
|
prtExHs4TsIConTs
This attribute indicates a unique time slot position.
The valid time slots are: 1..24 for T1 Module and 1..31 for E1 interface. In G732S-E1 lines time slot 16 is not valid for data, it is dedicated for multiframe synch… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.7.2.1.7 |
prtExHsiCnfgTable
table.1.3.6.1.4.1.164.3.2.3.2.8.1
·
1 row entry
·
8 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtExHsiCnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.8.1.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExHsiSltIdx
This attribute indicates a unique slot position where
the card is inserted. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.8.1.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExHsiPrtIdx
A unique port identifier within the card.
For MP : 1..12 For DXC: 111 .. 2531. See DXC R6 spec for port index convention. For FCD-A, 'S' Interface external ports: 131, 141, 151, 161. |
SNMPv2-SMIInteger32 Constraints: range: 0-256Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.8.1.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExHsiConnect
This attribute indicates whether the port should be considered in
any of the mux algorithms. v51 - this port is connected to a V5.1 interface. All rest of the values will be 'notApplicable' in this case. V5 MIB w… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.8.1.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExHsiRate
This attribute indicates the port speed.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.8.1.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExHsiLinkTo
deprecated
It indicates the slot of the main link card to which the HS-? card
is mapped. STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot and prtGenCnfgLinkToPort. |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.8.1.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExHsiInterface
It indicates the interface type:
lt = line termination nt = network termination te = terminal equipment. lt1 - for ASMi-31 connection (not ISDN) For MP: For HS-U/I only 'lt' and 'nt' are applicable. For HS-U… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.8.1.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExHsiActType
It indicates the Activation Type. Activation Type is the Synchronization
type towards the PBX. It is applicable only when prtExHsiInterface=nt. notApplicable - for cards that do not support this object, or when prtExHs… |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.8.1.1.8 |
prtInHsiCnfgTable
table.1.3.6.1.4.1.164.3.2.3.2.8.2
·
1 row entry
·
6 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry. This table is not applicable for MP-2100 HS-U card type.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
prtInHsiCnfgIdx
This object indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg |
Integer32 Constraints: range: 0-31 |
.1.3.6.1.4.1.164.3.2.3.2.8.2.1.1 |
||||||
|
prtInHsiSltIdx
This object indicates a unique slot position where
the card is inserted. |
Enumeration | .1.3.6.1.4.1.164.3.2.3.2.8.2.1.2 |
||||||
|
prtInHsiPrtIdx
A unique port identifier within the card.
Valid values for MP: inPrt1 (101) .. inPrt48 (148). Valid values for DXC: 11012.. 25316. See DXC R6 spec for port index convention. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.8.2.1.3 |
||||||
|
prtInHsiConnect
This attribute indicates whether the port should be considered in
any of the mux algorithms. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.8.2.1.4 |
||||||
|
prtInHsiRate
This object indicates the port speed.
For HS-U/I and HS-S ports: 2 bit - up to 9600bps 4 bit - 19200bps 8 bit - 38400bps .. 64kbps. concentrated - this D channel goes to a Concentration channel, that repr… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.8.2.1.5 |
||||||
|
prtInHsiConcentratedTo
The Concentration D Channel of the prtInHsiPrtIdx port.
The port always belongs to the same card as prtInHsiPrtIdx port. This object is applicable only when prtInHsiRate=concentrated. Valid values: - notApplicable: 255 … |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.8.2.1.6 |
prtExPVc4CnfgTable
table.1.3.6.1.4.1.164.3.2.3.2.9.1
·
1 row entry
·
52 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtExPVc4CnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg |
Integer32 | .1.3.6.1.4.1.164.3.2.3.2.9.1.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4SltIdx
This attribute indicates a unique slot position where
the card is inserted. |
Enumeration | .1.3.6.1.4.1.164.3.2.3.2.9.1.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4PrtIdx
This object indicates the port number in the selected card
(slot). |
Enumeration | .1.3.6.1.4.1.164.3.2.3.2.9.1.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4PrtType
This object indicates the type of the selected port.
In Mx 30/300 phase 4: s0 & u are for Voice over ISDN. In MX 30/300 phase 5: sQsig & uQsig are used for Voice over ISDN with Qsig option. In MX MVC4… |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.9.1.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4Connect
This attribute indicates whether the port should be
considered in any of the mux algorithms. |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.9.1.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4IfType
This attribute indicates the interface type of the port.
eAndM4wires and eAndM2wires - are valid only for E&M port type eAndM4wires - means 2/4 wires fxoGnd and fxoLoop - are valid onl… |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.9.1.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4TxGain
Transmission gain in dB.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4RxGain
Reception gain in dBm.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4MaxRate
Voice rate.
|
Enumerationr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.9 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4Tc
Time interval for CIR control, in seconds. The value will
be the same for all cards' ports. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.10 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4Oos
Handling type, when connection is lost.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.11 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4EchoCanceler
Echo canceler activation.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.12 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4VarDelay
Maximum variant delay of the FR network, in msec.
|
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.13 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4CongLevel
This object indicates the level of delayed data in
precents of total available dynamic memory, for which the port will start to operate as congested. The resolution of the parameter is 5%. |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.14 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4Wire
This object indicates the wiring of the E&M port.
It is applicable only for E&M card type. |
Enumerationr/w Constraints: range: 1-991 |
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.15 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4ExtensionType
This object indicates the type of extension relevant for this port.
ipForceConnect (6) is used for automatic connection or automatic dialing when the phone is off hook (hot line). permanentDial (7) means … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.16 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4ExtensionNumber
This is the extension number of this port.
This field is relevant only when the extension type is voice switching and is read only if the port is member of a hunt group. |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.17 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4OutPulsing
This field indicates whether to outpulse the received
digits. It is notApplicable(1) when the extension type is forceConnect(2). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.18 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4HuntGroupMb
This object indicates if this port belongs to
an hunt group. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.19 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4HuntGroupIdx
If it belongs to an hunt group, this fields
indicates the index of the relevant hunt group. 0 = notApplicable |
Integer32r/w Constraints: range: 6-8 |
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.20 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4AutoFaxMode
This object indicates if the system will switch automatically to
FAX mode when detecting FAX activity. Default=Yes. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.21 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4FaxRate
FAX initial rate.
Default=9600 bps. |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.9.1.1.22 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4SeizeAck
This parameter shows whether the device will acknowledge
a seize signal (On/Off Hook). When the value is set to yes(3) & the device receives an on/off hook signal it will transmit back an on/off hook signal. When th… |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.9.1.1.23 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4SignalingProtocol
The signaling protocol that will be used between the PABX & the voice port.
Delay Start Protocol: the line is seized by sending an Off hook signal and after a delay, if the called party is available (On h… |
Enumerationr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.24 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4DelayStart
This parameter is used only for Delay Protocol.
This is the time that the calling party will wait after sending an Off hook signal and before sending DTMF digits to the called party. The delay values are 100..5000 msec … |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.25 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4WinkMinDuration
This parameter is used only for Wink Protocol.
Min Duration of the Wink Signal (off hook duration from the called party). Legal values: 40..400 msec in intervals of 10 msec. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.26 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4WinkMaxDuration
This parameter is used only for Wink Protocol.
Max Duration of the Wink Signal (off hook duration from the called party). Legal values: 40..400 msec in intervals of 10 msec. |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.27 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4GenerateTone
This parameter indicates whether the device (MX or MPH) should generate
dial tones for the channel. If the value is yes (3), it generates dial tones. If the value is no (2), the connected equipment will generate dial t… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.28 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4CodingLaw
This attribute indicates the Method/Law for decoding/encoding the voice
information. aLaw(1) is the standard Law for E1 links. uLaw(2) is the standard Law for T1 links. This object is equal for all the po… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.29 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4GenerateRingBack
Determines whether the Ring Back tone is generated locally or from the
remote end. The default is - NO (Meaning coming from the remote end). Yes means that the Ring Back Tone is generated locally. Applicable onl… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.30 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4ChannelId
Channel Identifier.
According to FRF11 each voice port that works as force connect should add a CH Id after the DLCI in the frame header. Default : 1 Applicable only for Force Connect. Not… |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.31 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4PortConnection
Port connection determines whether the port is connected to a PABX (Trunk) or to
Telephone set (Line) . It determines whether to send certain messages to the port or not. If the type is LINE then the port… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.32 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4CoderAndRate
Coder and Rate for the Voice Compression.
In MPH: Relevant for MVC-8 card only. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.33 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4DestinationNum
The destination phone number: 0 to 22 digits.
Applicable for Auto Dial - ipForceConnect(6), Permanent Dial and Auto Accept Extension Types. Default: Null String |
SNMPv2-TCDisplayStringr/w Enumerated Values:
Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.34 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4DtmfRelay
When DTMF RELAY is disabled, the DTMF digits (dialed by the user)
are transmitted as compressed voice and in the remote unit are decompressed. When DTMF RELAY is enabled, the DTMF digits are detected at t… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.35 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4DiscOnSilence
No. of silenced seconds after which the call will be disconected.
A value of 0 means that there will be no disconnect when there is silence. Possible values: 0 - 900 sec. |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.36 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4DynamicJitter
The MVC8 uses two mechanisms to overcome the network delay.
The first one is a static jitter buffer which holds a constant buffer of up to 300 Msec and can be controled by the JITTER parameter (prtExPVc4VarDelay). The s… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.37 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4EandMType
This is the signaling type on the E&M analog side.
The analog signaling includes voltage, no. of pins and other parameters. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.38 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4Rate
This is the Rate of the port in TS units. It is used by VF-30 card family.
0 = NA = port is not intended to be connected; therefore, no Rate. |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.39 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4FrameSize
Defines the maximum size in Bytes of the multiplexed frame.
In some cases this must be limited to avoid IP fragmentation, which makes the multiplexing useless, and can also decrease the damage in case of frame loss. Val… |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.40 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4MultiplexInterval
Defines the maximum amout of time (msec.) between multiplexed frames
that are sent. For Vmux-400/420 devices: It defines the Payload Packetizing Interval. Valid values: 10-90 msec.… |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.41 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4TransportProtocol
Transport Protocol.
ptp = point to point. aal2oMpls = AAL2 over MPLS. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.42 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4MultiFreqRelay
This object enables/disables Multi Frequency Signaling Detection.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.43 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4MinPulseWidth
Defines the minimum Pulse Width in msec.
Valid values: 45-100 msec. notApplicable=0. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.44 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4MinPowerLevel
Defines the minimum Power Level in dBm.
Valid values: -1..-35 dBm. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.45 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4SuperTandem
The Super Tandem feature provides end to end compression
over multiple hops, solving the double compression problem detected in Voice compressing systems. The Super Tandem, when enabled, allows transmission of compre… |
Enumerationr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.46 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4DestIp
This object defines the destination IP Address.
|
RFC1155-SMIIpAddressr/w Enumerated Values:
Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.47 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4DestBundle
This object defines the destination Bundle at the
far-end device. |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.48 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4SrcIpAddress
This object defines the Source IP Address.
|
RFC1155-SMIIpAddressr/w Enumerated Values:
Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.49 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4SrcIpMask
This object defines the Source IP Mask.
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.50 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4DefaultGateway
This object defines the Default Gateway for this interface.
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.51 |
||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4SigPacketInterval
Defines the Signaling Packetizing Interval,
which is the maximum time interval, measured in msec (milliseconds), between multiplexed signaling frames. |
SNMPv2-SMIUnsigned32r/w Constraints: range: 1-255Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.2.3.2.9.1.1.52 |
prtExPVc4DlciTable
table.1.3.6.1.4.1.164.3.2.3.2.9.2
·
1 row entry
·
13 columns
The write operation into the Table Objects is valid only at the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtExPVc4DlciCnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.9.2.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4DlciSltIdx
This attribute indicates a unique slot position where
the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.9.2.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4DlciPrtIdx
This attribute indicates a unique internal port number.
VC4 cards have four external ports. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.9.2.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4DlciValid
This attribute indicates whether the attributes in this
entry are valid or not. The user can add/delete pvc (dlci to dlci connection) by modifing this object |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.9.2.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4DlciIConSlt
This attribute indicates a unique slot position In the Mux
(Agent) where the dlci is routed to. In the ?004 Unit the entries io6(10)..io16) are not valid |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.9.2.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4DlciIConPrt
This attribute indicates a unique port id which the dlci is
routed to. |
Enumerationr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.2.3.2.9.2.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4DlciIConDlci
This attribute indicates a unique internal connection dlci
number, the dlci is routed to. |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.9.2.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4DlciTxBc
This attribute indicates a unique Tx committed bandwidth on
the user transmit line (or at the port receive line). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.9.2.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4DlciTxBe
This attribute indicates a unique Tx excess bandwidth on the
user transmit line (or at the port receive line). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.9.2.1.9 |
||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4DlciRxBc
This attribute indicates a unique Rx committed bandwidth on the
user receive line (or at the port transmit line). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.9.2.1.10 |
||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4DlciRxBe
This attribute indicates a unique Rx excess bandwidth on the
user receive line (or at the port transmit line). |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.9.2.1.11 |
||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4DlciPriority
This attribute indicates a unique priority of the pvc.
6 is the lowest priority and 8 is the highest priority. |
Integer32r/w | .1.3.6.1.4.1.164.3.2.3.2.9.2.1.12 |
||||||||||||||||||||||||||||||||||||||||||||||||
|
prtExPVc4DlciStatus
This attribute indicates the status of the pvc. The status is
disconnected(1) when one of the sides is programmed as not connected |
Enumeration Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.2.3.2.9.2.1.13 |
prtExHsrCnfgTable
table.1.3.6.1.4.1.164.3.2.3.2.10.1
·
1 row entry
·
20 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtExHsrCnfgIdx
This object indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.10.1.1.1 |
||||||||||||||||||||||||||||||||||||||
|
prtExHsrSltIdx
This object indicates a unique slot position where
the card is inserted. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.10.1.1.2 |
||||||||||||||||||||||||||||||||||||||
|
prtExHsrPrtIdx
A unique prt identifier within the card.
Valid values: For MP: - For HS-R cards: exPrt1 (1) .. exPrt4 (4) - For HS-U/1 cards: inPrt1 (101) .. inPrt4 (104) - For HS-S12, HS-S6, HS-U12, HS-U6 cards: exPrt1 (1)… |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.10.1.1.3 |
||||||||||||||||||||||||||||||||||||||
|
prtExHsrConnect
This object indicates whether the port should be considered in
any of the mux algorithms. |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.10.1.1.4 |
||||||||||||||||||||||||||||||||||||||
|
prtExHsrProtocol
This object indicates the protocol.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.10.1.1.5 |
||||||||||||||||||||||||||||||||||||||
|
prtExHsrRate
This object indicates the port speed.
The 16,32,48,56,64 and 128 kbps rates are applicable only for Sync protocol. The 57.6 and 115.2 kbps rates are applicable only for Async protocol. notConnected= 0 rate. |
Enumerationr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.2.3.2.10.1.1.6 |
||||||||||||||||||||||||||||||||||||||
|
prtExHsrDataBits
Data Bits.
This object is applicable for Async protocol only. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.10.1.1.7 |
||||||||||||||||||||||||||||||||||||||
|
prtExHsrParity
- For HS-R card, this object indicates if the parity bit is needed or not.
Therefore, the 'no' and 'yes; values are applicable. - For HS-S12, HS-U12, the parity type is selected: no, odd, even. This object is applicabl… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.10.1.1.8 |
||||||||||||||||||||||||||||||||||||||
|
prtExHsrStopBits
This object indicates the minimum number of stop bits in
the tx async frame. This object is applicable for Async protocol only. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.10.1.1.9 |
||||||||||||||||||||||||||||||||||||||
|
prtExHsrCts
CTS.
This object is applicable for Async protocol only. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.10.1.1.10 |
||||||||||||||||||||||||||||||||||||||
|
prtExHsrClkMode
Clock mode.
This object is applicable for Sync protocol only. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.10.1.1.11 |
||||||||||||||||||||||||||||||||||||||
|
prtExHsrLinkTo
deprecated
It indicates the slot of the main link card to which the HS-R card
is mapped. notApplicable - for HS-U/1 internal ports. STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot and prtGenCnfgLinkToPort. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.10.1.1.12 |
||||||||||||||||||||||||||||||||||||||
|
prtExHsrDcdDsr
DCD & DSR.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.10.1.1.13 |
||||||||||||||||||||||||||||||||||||||
|
prtExHsrOperMode
This object indicates the operation mode of the port.
normal = bi-directional (Tx/Rx) unidirectRx = unidirectional Rx. broadcast = Tx upon request. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.10.1.1.14 |
||||||||||||||||||||||||||||||||||||||
|
prtExHsrRtsDtr
RTS & DTR.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.10.1.1.15 |
||||||||||||||||||||||||||||||||||||||
|
prtExHsrLlbEnable
Enable/Disable LLB.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.10.1.1.16 |
||||||||||||||||||||||||||||||||||||||
|
prtExHsrRlbEnable
Enable/Disable RLB.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.10.1.1.17 |
||||||||||||||||||||||||||||||||||||||
|
prtExHsrRateAdapt
Rate Adaptation - takes a low rate and adapts it to 64Kbps.
This object specifies the means this adaptation is done by. |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.10.1.1.18 |
||||||||||||||||||||||||||||||||||||||
|
prtExHsrRemoteModem
Remote modem.
asmi31s2 = ASMi-31/2 |
Enumerationr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.2.3.2.10.1.1.19 |
||||||||||||||||||||||||||||||||||||||
|
prtExHsrEncapsMode
Low Speed encapsulation method over PCM.
When Encapsulation mode is Latency optimized, only rates up to 19.2 are supported. In this case a double number of bits occupy the Time Slot. For up to 9.6 Kbps … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.10.1.1.20 |
prtExMbeCnfgTable
table.1.3.6.1.4.1.164.3.2.3.2.11.1
·
1 row entry
·
4 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtExMbeCnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.11.1.1.1 |
||||||||||||||||
|
prtExMbeSltIdx
This attribute indicates a unique slot position where
the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.11.1.1.2 |
||||||||||||||||
|
prtExMbePrtIdx
A unique port identifier within the card.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.11.1.1.3 |
||||||||||||||||
|
prtExMbeLan
This attribute indicates whether the MBE port is operated
as main or remote bridge. |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.11.1.1.4 |
prtInMbeCnfgTable
table.1.3.6.1.4.1.164.3.2.3.2.11.2
·
1 row entry
·
6 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtInMbeCnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg |
Integer32 | .1.3.6.1.4.1.164.3.2.3.2.11.2.1.1 |
||||||||||||||||||||||||
|
prtInMbeSltIdx
This attribute indicates a unique slot position where
the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid. |
Enumeration | .1.3.6.1.4.1.164.3.2.3.2.11.2.1.2 |
||||||||||||||||||||||||
|
prtInMbePrtIdx
A unique port identifier within the card.
|
Enumeration Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.2.3.2.11.2.1.3 |
||||||||||||||||||||||||
|
prtInMbeConnect
This attribute indicates whether the port should be considered in
any of the mux algorithms. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.11.2.1.4 |
||||||||||||||||||||||||
|
prtInMbeRate
This attribute indicates the port speed.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.11.2.1.5 |
||||||||||||||||||||||||
|
prtInMbeLinkTo
deprecated
It indicates the slot of the main link card to which the
MBE card is mapped. In the ?004 Unit the entries io6(10)..io16) are not valid. STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot and prtGenCnfg… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.11.2.1.6 |
prtExTreCnfgTable
table.1.3.6.1.4.1.164.3.2.3.2.12.1
·
1 row entry
·
5 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtExTreCnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.12.1.1.1 |
||||||||||||||||||||||||||
|
prtExTreSltIdx
This attribute indicates a unique slot position where
the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.12.1.1.2 |
||||||||||||||||||||||||||
|
prtExTrePrtIdx
A unique port identifier within the card.
|
Enumeration | .1.3.6.1.4.1.164.3.2.3.2.12.1.1.3 |
||||||||||||||||||||||||||
|
prtExTreLan
This attribute indicates whether the TRE port is operated
as main or remote bridge. Default=remote. |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.12.1.1.4 |
||||||||||||||||||||||||||
|
prtExTreLanRate
This attribute indicates the Rate of the TRE port
in Mbit/sec. Default-r4M. |
Enumerationr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.2.3.2.12.1.1.5 |
prtInTreCnfgTable
table.1.3.6.1.4.1.164.3.2.3.2.12.2
·
1 row entry
·
6 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
prtInTreCnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.12.2.1.1 |
||||
|
prtInTreSltIdx
This attribute indicates a unique slot position where
the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid. |
Enumeration | .1.3.6.1.4.1.164.3.2.3.2.12.2.1.2 |
||||
|
prtInTrePrtIdx
A unique port identifier within the card.
|
Enumeration | .1.3.6.1.4.1.164.3.2.3.2.12.2.1.3 |
||||
|
prtInTreConnect
This attribute indicates whether the port should be considered
in any of the mux algorithms. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.12.2.1.4 |
||||
|
prtInTreRate
This attribute indicates the port speed.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.12.2.1.5 |
||||
|
prtInTreLinkTo
deprecated
It indicates the slot of the main link card to which the
MBE card is mapped. In the ?004 Unit the entries io6(10)..io16) are not valid. STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot and prtGenCnfg… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.12.2.1.6 |
prtExLs6CnfgTable
table.1.3.6.1.4.1.164.3.2.3.2.13.1
·
1 row entry
·
11 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry.
An entry in table.
Indexes
prtInVc3CnfgIdx prtInVc3SltIdx prtInVc3PrtIdx
| Column | Syntax | OID | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtExLs6CnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg |
Integer32 Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.2.3.2.13.1.1.1 |
||||||||||||||||||||||||
|
prtExLs6SltIdx
This attribute indicates a unique slot position where
the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.13.1.1.2 |
||||||||||||||||||||||||
|
prtExLs6PrtIdx
This attribute indicates a unique port index.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.13.1.1.3 |
||||||||||||||||||||||||
|
prtExLs6Connect
This attribute indicates whether the port should be
considered in any of the mux algorithms. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.13.1.1.4 |
||||||||||||||||||||||||
|
prtExLs6Protocol
This attribute indicates the protocol.
async - can be selected only for ports 1-2. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.13.1.1.5 |
||||||||||||||||||||||||
|
prtExLs6Rate
Port rates in bps.
g1 - contains the values : (2)-(6),(9),(12),(16) g2 - contains the values : (7),(10),(14),(19) g3 - contains the values : (8),(11),(13),(15),(17),(18),(20); it is not applicable when using Async … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.13.1.1.6 |
||||||||||||||||||||||||
|
prtExLs6ClkMode
This attribute indicates a unique port operation clock mode.
It is applicable for Sync protocol only . |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.13.1.1.7 |
||||||||||||||||||||||||
|
prtExLs6CtrlSignal
Control Signal.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.13.1.1.8 |
||||||||||||||||||||||||
|
prtExLs6DataBits
Data Bits.
This object is applicable for Async protocol only. |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.13.1.1.9 |
||||||||||||||||||||||||
|
prtExLs6Cts
This object indicates the CTS control line
operation mode. |
Enumerationr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.2.3.2.13.1.1.10 |
||||||||||||||||||||||||
|
prtExLs6LinkToInternal
This object indicates which internal port of the card,
the external port is linked to. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.13.1.1.11 |
prtExLs6VCnfgTable
table.1.3.6.1.4.1.164.3.2.3.2.13.2
·
1 row entry
·
10 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtExLs6VCnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.13.2.1.1 |
||||||||||||||||||||||||||
|
prtExLs6VSltIdx
This attribute indicates a unique slot position where
the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.13.2.1.2 |
||||||||||||||||||||||||||
|
prtExLs6VPrtIdx
A unique identifier of the port, within the card.
|
Enumeration | .1.3.6.1.4.1.164.3.2.3.2.13.2.1.3 |
||||||||||||||||||||||||||
|
prtExLs6VConnect
This attribute indicates whether the port should be
considered in any of the mux algorithms. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.13.2.1.4 |
||||||||||||||||||||||||||
|
prtExLs6VRate
Rate (bps) used for FAX transmission and Voice coding.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.13.2.1.5 |
||||||||||||||||||||||||||
|
prtExLs6VEchoCanceler
Echo canceler activation.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.13.2.1.6 |
||||||||||||||||||||||||||
|
prtExLs6VIfType
This attribute indicates the interface type of the port.
w4wire - is applicable only for E&M port type. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.13.2.1.7 |
||||||||||||||||||||||||||
|
prtExLs6VTxGain
Transmit gain in dBm.
E&M - values range: -17 .. 8 FXO - values range: -16 .. 4 FXS - values range: -13 .. 8 |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.13.2.1.8 |
||||||||||||||||||||||||||
|
prtExLs6VRxGain
Receive gain in dBm.
E&M - values range: -17 .. 2 FXO - values range: -17 .. -1 FXS - values range: -17 .. 2 |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.13.2.1.9 |
||||||||||||||||||||||||||
|
prtExLs6VOos
Out of Service signaling mode.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.13.2.1.10 |
prtInLs6CnfgTable
table.1.3.6.1.4.1.164.3.2.3.2.13.3
·
1 row entry
·
8 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry.
An entry in table.
Indexes
prtIn1p6VcPbxCnfgIdx prtIn1p6VcPbxSltIdx prtIn1p6VcPbxPrtIdx
| Column | Syntax | OID | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtInLs6CnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg |
Integer32 Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.2.3.2.13.3.1.1 |
||||||||||||||||||||||||
|
prtInLs6SltIdx
This attribute indicates a unique slot position where
the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.13.3.1.2 |
||||||||||||||||||||||||
|
prtInLs6PrtIdx
This attribute indicates a unique internal port index.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.13.3.1.3 |
||||||||||||||||||||||||
|
prtInLs6Connect
This attribute indicates whether the port should be considered in
any of the mux algorithms. It also affects all the module considerations because the module has only one Internal interface which is the composite chann… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.13.3.1.4 |
||||||||||||||||||||||||
|
prtInLs6TandemMode
This object indicates the Tandem Mode.
tandemSlave - is valid only for an LS-6 card having on the (current slot-1) an LS-6 card with 'tandemMaster' mode. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.13.3.1.5 |
||||||||||||||||||||||||
|
prtInLs6Rate
Main Rate in Kbps.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.13.3.1.6 |
||||||||||||||||||||||||
|
prtInLs6RemoteType
Remote Type.
notApplicable - when prtInLs6TandemMode=tandemSlave |
Enumerationr/w Constraints: range: 1-31 |
.1.3.6.1.4.1.164.3.2.3.2.13.3.1.7 |
||||||||||||||||||||||||
|
prtInLs6LinkTo
deprecated
It indicates the slot of the main link card to which the
Ls6 card is mapped. In the ?004 Unit the entries io6(10)..io12(16) are not valid. notApplicable - when prtInLs6TandemMode=tandemSlave. STATUS deprecated - this o… |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.13.3.1.8 |
prtExVc3CnfgTable
table.1.3.6.1.4.1.164.3.2.3.2.14.1
·
1 row entry
·
9 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtExVc3CnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.14.1.1.1 |
||||||||||||||||||||||||||
|
prtExVc3SltIdx
This attribute indicates a unique slot position where
the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.14.1.1.2 |
||||||||||||||||||||||||||
|
prtExVc3PrtIdx
A unique identifier of the port, within the card.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.14.1.1.3 |
||||||||||||||||||||||||||
|
prtExVc3Connect
This attribute indicates whether the port should be
considered in any of the mux algorithms. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.14.1.1.4 |
||||||||||||||||||||||||||
|
prtExVc3TransGain
Transmit gain in dBm.
|
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.14.1.1.5 |
||||||||||||||||||||||||||
|
prtExVc3ReceiveGain
Receive gain in dBm.
|
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.14.1.1.6 |
||||||||||||||||||||||||||
|
prtExVc3Wire
This object is equal for all the ports in the specific
card because of HW limitations |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.14.1.1.7 |
||||||||||||||||||||||||||
|
prtExVc3Rate
Rate in bps.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.14.1.1.8 |
||||||||||||||||||||||||||
|
prtExVc3EchoCanceler
Echo canceler activation. The value will be the same for
all the card's external ports. |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.14.1.1.9 |
prtInVc3CnfgTable
table.1.3.6.1.4.1.164.3.2.3.2.14.2
·
1 row entry
·
7 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtInVc3CnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.14.2.1.1 |
||||||||||||||||||||||||||||||||||||||||||
|
prtInVc3SltIdx
This attribute indicates a unique slot position where
the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.14.2.1.2 |
||||||||||||||||||||||||||||||||||||||||||
|
prtInVc3PrtIdx
A unique identifier of the port, within the card.
|
Enumeration | .1.3.6.1.4.1.164.3.2.3.2.14.2.1.3 |
||||||||||||||||||||||||||||||||||||||||||
|
prtInVc3Connect
This attribute indicates whether the port should be
considered in any of the mux algorithms. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.14.2.1.4 |
||||||||||||||||||||||||||||||||||||||||||
|
prtInVc3Rate
Rate in bps.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.14.2.1.5 |
||||||||||||||||||||||||||||||||||||||||||
|
prtInVc3Oos
This object is equal for all the ports in the specific
card because of HW limitations |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.14.2.1.6 |
||||||||||||||||||||||||||||||||||||||||||
|
prtInVc3LinkTo
deprecated
This attribute indicates the slot of the ML card to which
the VC card is mapped. In the ?004 Unit the entries io6(10)..io12(16) are not valid. STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot and prt… |
Enumerationr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.2.3.2.14.2.1.7 |
prtExVcPbxCnfgTable
table.1.3.6.1.4.1.164.3.2.3.2.15.1
·
1 row entry
·
14 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtExVcPbxCnfgIdx
This object indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg |
Integer32 | .1.3.6.1.4.1.164.3.2.3.2.15.1.1.1 |
||||||||||||||||||||||||||||||
|
prtExVcPbxSltIdx
This object indicates a unique slot position where
the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.15.1.1.2 |
||||||||||||||||||||||||||||||
|
prtExVcPbxPrtIdx
A unique identifier of the port, within the card.
|
Enumeration | .1.3.6.1.4.1.164.3.2.3.2.15.1.1.3 |
||||||||||||||||||||||||||||||
|
prtExVcPbxConnect
This object indicates whether the port should be
considered in any of the mux algorithms. |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.15.1.1.4 |
||||||||||||||||||||||||||||||
|
prtExVcPbxGroup
The group object links together several VC-PBX cards,
concerning compression of the same input T1/E1 link time-slots. When ports of different slots have the same group, they are linked. When ports have a different group… |
Enumeration | .1.3.6.1.4.1.164.3.2.3.2.15.1.1.5 |
||||||||||||||||||||||||||||||
|
prtExVcPbxTransparent
This object indicates whether the Transparent transfer
of Time-Slots is required or not. Time-Slots transferred by Transparent, will not be compressed. no - applicable only for VC-PBX/T1 and VC-PBX/E1 cards yes - appli… |
Enumerationr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.2.3.2.15.1.1.6 |
||||||||||||||||||||||||||||||
|
prtExVcPbxTransSignalTs
This object specifies the ML Time-Slot dedicated to
the signaling of the PABX Transparent TSs. None = 255. When prtExVcPbxTransparent=no this object's value=None (255) When prtExVcPbxTransparent=notApplicable, this obje… |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.15.1.1.7 |
||||||||||||||||||||||||||||||
|
prtExVcPbxFrame
This object is the frame parameter for T1/E1 interface.
The user should select only the parameters which are relevant to the specific card: T1 values for the VC-PBX/T1 card. E1 values for the VC-PBX/E1 card. notApplicab… |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.15.1.1.8 |
||||||||||||||||||||||||||||||
|
prtExVcPbxRestoreTime
The time passing from the disappearance of the loss of
synchronization condition (red alarm) to the restoration of normal service. The options 1secFast(2) and 10sec62411(3) for E1 interfaces are proprietary implementati… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.15.1.1.9 |
||||||||||||||||||||||||||||||
|
prtExVcPbxLineCode
This object is the line code parameter used for T1/E1
interface. The user should select only the parameters which are relevant to the specific card: T1 line code parameters for VC-PBX/T1 E1 line code parameters for VC-P… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.15.1.1.10 |
||||||||||||||||||||||||||||||
|
prtExVcPbxLineLength
This object is the line length parameter.
It is applicable only for the VC-PBX/T1 card. notApplicable - for the VC-PBX and VC-PBX/E1 card. lenXXXpXXXft = len-XXX-XXXft. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.15.1.1.11 |
||||||||||||||||||||||||||||||
|
prtExVcPbxLinkTo
deprecated
This object indicates the slot of the ML card to which
the VC-PBX/T1, VC-PBX/E1 card Transparent TSs are mapped. notApplicable - for VC-PBX card AND for VC-PBX/T1, VC-PBX/E1 cards, when prtExVcPbxTransparent=no . In the… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.15.1.1.12 |
||||||||||||||||||||||||||||||
|
prtExVcPbxSignalOper
This object indicates the Signaling Operation of the
VC-PBX/T1, VC-PBX/E1 external port. notApplicable - for VC-PBX card normal - all 4 signaling bits are transferred. bEqA - copy the A bit into the B bit. Applicable … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.15.1.1.13 |
||||||||||||||||||||||||||||||
|
prtExVcPbxIdleCode
Determines the code for transmission in empty time slots.
notApplicable - for VC-PBX card . |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.15.1.1.14 |
prtIn1p6VcPbxCnfgTable
table.1.3.6.1.4.1.164.3.2.3.2.15.2
·
1 row entry
·
7 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
prtIn1p6VcPbxCnfgIdx
This object indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.15.2.1.1 |
||||||||
|
prtIn1p6VcPbxSltIdx
This object indicates a unique slot position where
the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.15.2.1.2 |
||||||||
|
prtIn1p6VcPbxPrtIdx
A unique identifier of the port, within the card.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.15.2.1.3 |
||||||||
|
prtIn1p6VcPbxConnect
This object indicates whether the port should be
considered in any of the mux algorithms. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.15.2.1.4 |
||||||||
|
prtIn1p6VcPbxRate
This object indicates the port Rate.
For Normal mode (prtIn7p8VcPbxMode=normal), only part of the values are valid (constant rate). For Server mode (prtIn7p8VcPbxMode=server), all values are applicable (user can select … |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.15.2.1.5 |
||||||||
|
prtIn1p6VcPbxEchoCanceler
Echo canceler activation.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.15.2.1.6 |
||||||||
|
prtIn1p6VcPbxPabxTs
This object defines the PABX Time-Slot assigned to this
internal port. For a T1 link, the valid values are: 1 .. 24. For an E1 link, the valid values are: 1 .. 31. This object is NOT applicable when prtIn1p6VcPbxConnec… |
Integer32 | .1.3.6.1.4.1.164.3.2.3.2.15.2.1.7 |
prtIn7p8VcPbxCnfgTable
table.1.3.6.1.4.1.164.3.2.3.2.15.3
·
1 row entry
·
9 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
prtIn7p8VcPbxCnfgIdx
This object indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg |
Integer32 | .1.3.6.1.4.1.164.3.2.3.2.15.3.1.1 |
||||||||
|
prtIn7p8VcPbxSltIdx
This object indicates a unique slot position where
the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.15.3.1.2 |
||||||||
|
prtIn7p8VcPbxPrtIdx
A unique identifier of the port, within the card.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.15.3.1.3 |
||||||||
|
prtIn7p8VcPbxConnect
This object indicates whether the port should be
considered in any of the mux algorithms. |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.15.3.1.4 |
||||||||
|
prtIn7p8VcPbxMode
This object indicates the working mode of the port:
- normal - the compressed voice will be sent to an MTML card inside the Mux. - server - the compressed voice will be sent to the Digital Voice co… |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.15.3.1.5 |
||||||||
|
prtIn7p8VcPbxRate
This object indicates the port Main Rate.
For Server mode (prtIn7p8VcPbxMode=server), the value will be notApplicable. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.15.3.1.6 |
||||||||
|
prtIn7p8VcPbxSignalMode
This object indicates the Signal Mode.
For Server mode (prtIn7p8VcPbxMode=server), the only valid values are: - none - aBit |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.15.3.1.7 |
||||||||
|
prtIn7p8VcPbxOos
Out of service Signaling mode.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.15.3.1.8 |
||||||||
|
prtIn7p8VcPbxLinkTo
deprecated
This object indicates the slot of the ML card to which
the VC card is mapped. In the ?004 Unit the entries io6(10)..io12(16) are not valid. For Server mode (prtIn7p8VcPbxMode=server), this object is not applicable. Both… |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.15.3.1.9 |
prtExVcPbxTsTable
table.1.3.6.1.4.1.164.3.2.3.2.15.4
·
1 row entry
·
13 columns
The write operation into the table objects is valid only to the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
prtExVcPbxTsCnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg. |
Integer32 | .1.3.6.1.4.1.164.3.2.3.2.15.4.1.1 |
|
prtExVcPbxTsSltIdx
This attribute indicates a unique slot position where
the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid |
Enumeration Constraints: range: 17-20 |
.1.3.6.1.4.1.164.3.2.3.2.15.4.1.2 |
|
prtExVcPbxTsPrtIdx
This attribute indicates a unique port number.
VCPBX/E1, VCPBX/T1, VFPBX/E1, VFPBX/T1, VF-24/T1 and VF-30 cards have only one external interface. VF-48/T1 and VF-60/E1 cards have two external interfaces. VFS cards hav… |
Enumeration Constraints: range: 4-6 |
.1.3.6.1.4.1.164.3.2.3.2.15.4.1.3 |
|
prtExVcPbxTsIdx
This attribute indicates a unique PABX time slot position.
The valid time slots are 1..24 for T1 cards and 1..31 for E1 cards. |
SNMPv2-SMIInteger32 Constraints: range: 17-20Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.15.4.1.4 |
|
prtExVcPbxTsMode
This attribute indicates the usage, process and way of the
specific PABX TS towards its destination: unused - the TS is not used (no processing, no destination). compressed - the TS is used, sent for compression to an … |
Enumerationr/w Constraints: range: 4-6 |
.1.3.6.1.4.1.164.3.2.3.2.15.4.1.5 |
|
prtExVcPbxTsIConSlot
For VF-PBX cards, the io1..io12 values are applicable only when
prtExVcPbxTsMode=compressed. Otherwise, its value should be noConnect. For VF-24/30/48/60 cards: - when prtExVcPbxTsMode=transparent or voiceTransp… |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.15.4.1.6 |
|
prtExVcPbxTsIConPrt
This attribute indicates the port to which this TS is connected.
For VF-PBX cards, only inPrt1..inPrt6 ports are valid. For VF-24/30/48/60 cards: - for prtExVcPbxTsMode=transparent or voiceTransparent, the valid por… |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.15.4.1.7 |
|
prtExVcPbxTsIConTs
This attribute indicates the ML TS to which this TS is connected.
This object is not applicable for VF-PBX cards. For VF-24/30/48/60 cards it is applicable only when prtExVcPbxTsMode=transparent or voiceTransparent. Th… |
Integer32r/w | .1.3.6.1.4.1.164.3.2.3.2.15.4.1.8 |
|
prtExVcPbxTsRemPrt
This attribute indicates the end-point port on the Remote unit.
VF-24/T1 and VF-30/E1 cards have one external interface. VF-48/T1 and VF-60/E1 cards have two external interfaces. noConnect - when prtExVcPbxTsMode=unused… |
Enumerationr/w Constraints: range: 17-20 |
.1.3.6.1.4.1.164.3.2.3.2.15.4.1.9 |
|
prtExVcPbxTsRemTs
This attribute indicates the end-point TS on the Remote unit.
The valid time slots are 1..24 for T1 ports and 1..31 for E1 ports. notApplicable - 255. |
SNMPv2-SMIInteger32r/w Constraints: range: 4-6Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.15.4.1.10 |
|
prtExVcPbxTsRemConnID
This attribute indicates the Connection ID with the Remote unit.
notApplicable = 0. |
SNMPv2-SMIUnsigned32r/w Constraints: range: 17-20Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.2.3.2.15.4.1.11 |
|
prtExVcPbxTsSourceSlot
For VFS cards. These cards offer Compresed Voice Services for
Analog Voice ports of the MP. This object indicates the Source Slot of the Analog Voice port we want to compress. io1..io12 values are applicable only when… |
Enumerationr/w Constraints: range: 4-6 |
.1.3.6.1.4.1.164.3.2.3.2.15.4.1.12 |
|
prtExVcPbxTsSourcePrt
For VFS cards. These cards offer Compresed Voice Services for
Analog Voice ports of the MP. This object indicates the Source Port within the Slot of the Analog Voice Card, we want to compress. exPrt1 - exPrt16 = 1 - 1… |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.2.3.2.15.4.1.13 |
prtIsdnCnfgTable
table.1.3.6.1.4.1.164.3.2.3.2.16.1
·
1 row entry
·
16 columns
The write operation into the table objects is valid only to the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtIsdnCnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.16.1.1.1 |
||||||||||||||||||||||||||
|
prtIsdnSltIdx
This attribute indicates a unique slot position where
the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid For KM2100/4 Valid entries are 'kmxMlA ' or 'kmxMlB' |
Enumeration | .1.3.6.1.4.1.164.3.2.3.2.16.1.1.2 |
||||||||||||||||||||||||||
|
prtIsdnPrtIdx
This attribute indicates a unique port number.
For MAXcess the values will be: exPrt1(1), exPrt2(2), exPrt3(3), exPrt4(4), For KM-2100 the port index is calculated as follows: 100*Slot+Ch |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.16.1.1.3 |
||||||||||||||||||||||||||
|
prtIsdnConnect
This attribute indicates if the port is connected.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.16.1.1.4 |
||||||||||||||||||||||||||
|
prtIsdnSignalingProtocol
This attribute fixes which signaling protocol
is used at this port (D-Channel). It is equivalent to isdnSignalingProtocol in the isdn MIB. |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.16.1.1.5 |
||||||||||||||||||||||||||
|
prtIsdnBasicRateLineTopology
This attribute is relevant for ISDN BRI only.
It is equivalent to isdnBasicRateLineTopology in the isdn MIB. |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.16.1.1.6 |
||||||||||||||||||||||||||
|
prtIsdnMode
This attribute allows the user to configure the port as
leased(2) in case of connection to a TDM network. |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.16.1.1.7 |
||||||||||||||||||||||||||
|
prtIsdnFilter
This attribute allows the user to configure the port:
answerAll(2): accept all incoming calls, rejectAll(3): reject all incoming calls, selective(4): accept or reject according directory table. callBack (5): In this mod… |
Enumerationr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.2.3.2.16.1.1.8 |
||||||||||||||||||||||||||
|
prtIsdnSimultaneousCall
In case of simultaneous call (local,remote and remote,local):
accept(2): accept the incoming call, reject(3): reject the incoming call. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.16.1.1.9 |
||||||||||||||||||||||||||
|
prtIsdnNumOfAbstractTerm
An object for KM2100/4 agents.
255=Not Applicable When ISDN Standard = ETSI or NTT (European) the value should be 255 (NotApplicable) else If ML speed is 64Kbps value should be 1. If ML speed is 128Kbps value c… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.16.1.1.10 |
||||||||||||||||||||||||||
|
prtIsdnSwitchMode
For KM2100.
auto - The call is initiated automatically by one of the IO cards connected to KML.10(ISDN card) having ISDN Switch Mode. manual - The call is initiated by the user manually, for KML.10 … |
Enumerationr/w Constraints: range: 0-255 |
.1.3.6.1.4.1.164.3.2.3.2.16.1.1.11 |
||||||||||||||||||||||||||
|
prtIsdnAbSide
This parameter indicates the QSIG side in layer 3.
This definition is from the QSIG Standard. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.16.1.1.12 |
||||||||||||||||||||||||||
|
prtIsdnQsigRole
This parameter indicates the QSIG side in layer 1 & 2.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.16.1.1.13 |
||||||||||||||||||||||||||
|
prtIsdnInterface
It indicates the interface type:
lt = line termination nt = network termination te = terminal equipment. |
Enumerationr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.2.3.2.16.1.1.14 |
||||||||||||||||||||||||||
|
prtIsdnCallMode
This object indicates the acceptance of incoming calls.
Initiate - Callout Listen - Callin. |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.16.1.1.15 |
||||||||||||||||||||||||||
|
prtIsdnCallBackTimeout
This object is applicable only if 'prtIsdnFilter' is 'CallBack'
and determines how long to wait from receiving the incoming call until initiating the call back call. The vaules range should be '1..20 sec' and the defaul… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.16.1.1.16 |
prtIsdnEndpointTable
table.1.3.6.1.4.1.164.3.2.3.2.16.2
·
1 row entry
·
9 columns
The write operation into the table objects is valid only to the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtIsdnEndpointCnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg. |
Integer32 Constraints: range: 200-250 |
.1.3.6.1.4.1.164.3.2.3.2.16.2.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtIsdnEndpointSltIdx
This attribute indicates a unique slot position where
the card is inserted. In ?004 Unit the entries io6(10)..io12(16) are not valid For KM2100/4 Valid entries are 'kmxMlA ' or 'kmxMlB' |
Enumeration Constraints: range: 1-8 |
.1.3.6.1.4.1.164.3.2.3.2.16.2.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtIsdnEndpointPrtIdx
This attribute indicates a unique port number.
For MAXcess the values will be: exPrt1(1), exPrt2(2), exPrt3(3), exPrt4(4), For KM-2100 the port index is calculated as follows: 100*Slot+Ch |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.16.2.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtIsdnEndpointIdx
Since more than one endpoint may be defined per
isdn entity, this field is a simple index. It corresponds to isdnEndpointIdx in the isdn MIB. |
Enumeration | .1.3.6.1.4.1.164.3.2.3.2.16.2.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtIsdnEndpointTeiType
The type of TEI (Terminal Endpoint Identifier)
used for this Terminal Endpoint. In case of dynamic(1), the TEI value is selected by the switch. In case of static(2), a valid TEI value has to be entered in the isdnEndpoi… |
Enumerationr/w Constraints: range: 1-8 |
.1.3.6.1.4.1.164.3.2.3.2.16.2.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtIsdnEndpointTeiValue
When the TEI Type is static, the value of the TEI should be
between 0 and 63. Else, it is not selectable by user. 255 = notApplicable. It corresponds to isdnEndpointTeiValue in the isdn MIB |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.16.2.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtIsdnEndpointSpid
The Service profile IDentifier (SPID) information
for this Terminal Endpoint. It is is composed of 9-20 numeric characters. It corresponds to isdnEndpointSpid in the isdn MIB. |
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.2.3.2.16.2.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtIsdnEndpointBearerCh
This is the selected dialing channel.
anyChannel - the system selects the dialing channel. |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.16.2.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtIsdnEndpointRowStatus
This field indicates whether to consider this endpoint or not.
The only possible supported RowStatus vaules are active (1) and destroy (6). |
SNMPv2-TCRowStatusr/w Constraints: range: 1-255Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.3.2.3.2.16.2.1.9 |
prtIsdnDirectoryTable
table.1.3.6.1.4.1.164.3.2.3.2.16.3
·
1 row entry
·
14 columns
The write operation into the table objects is valid only to the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtIsdnDirectoryCnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg. |
Integer32 Constraints: range: 1-1 |
.1.3.6.1.4.1.164.3.2.3.2.16.3.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtIsdnDirectorySltIdx
This attribute indicates a unique slot position where
the card is inserted. For MX300/30 ports: io1(5) = isdn1(5) and io2(6) = isdn2(6). In ?004 Unit the entries io6(10)..io12(16) are not valid For KM2100/4 Valid entr… |
Enumeration | .1.3.6.1.4.1.164.3.2.3.2.16.3.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtIsdnDirectoryPrtIdx
For MAXcess this is the internal port number: 101, 102,....
For KM-2100 the port index is calculated as follows: 100*Slot+Ch |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.16.3.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtIsdnDirectoryLocalAddr
This is the local address associated with this
entry. - For MX: Size=17 , Default=0 (17 characters) - For KM: Size=20, Default=blank (20 characters) |
OctetStringr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.2.3.2.16.3.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtIsdnDirectoryLocalSubAddr
This is the local subaddress associated with this
entry. - For MX: Size=6 , Default=0 (6 characters) - For KM: Size=4 , Default=blank (4 characters) |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.16.3.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtIsdnDirectoryRemoteAddr
This is the remote address associated with this
entry. - For MX: Size=17 , Default=0 (17 characters) - For KM: Size=20, Default=blank (20 characters) |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.16.3.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtIsdnDirectoryRemoteSubAddr
This is the remote subaddress associated with this
entry. - For MX: Size=6 , Default=0 (6 characters) - For KM: Size=4 , Default=blank (4 characters) |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.16.3.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtIsdnDirectoryPrtNu
This is the external port number connected to
this entry. |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.16.3.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtIsdnDirectoryTeiId
This is the abstract terminal id if relevant,
connected to this entry. |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.16.3.1.9 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtIsdnDirectoryRowStatus
This is the status for the row. It allows to know
whether to consider this row or not. The only possible supported RowStatus vaules are active (1) and destroy (6). |
SNMPv2-TCRowStatusr/w Constraints: range: 0-4Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.3.2.3.2.16.3.1.10 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtIsdnDirectoryLocalAddr2
This is the second local address associated with this
entry. - For MX: Size=17 , Default=0 (17 characters) - For KM: Size=20, Default=blank (20 characters) |
OctetStringr/w Constraints: range: 0-4 |
.1.3.6.1.4.1.164.3.2.3.2.16.3.1.11 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtIsdnDirectoryLocalSubAddr2
This is the second local subaddress associated with this
entry. - For MX: Size=6 , Default=0 (6 characters) - For KM: Size=4 , Default=blank (4 characters) |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.16.3.1.12 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtIsdnDirectoryRemoteAddr2
This is the second remote address associated with this
entry. - For MX: Size=17 , Default=0 (17 characters) - For KM: Size=20, Default=blank(20 characters) |
OctetStringr/w | .1.3.6.1.4.1.164.3.2.3.2.16.3.1.13 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtIsdnDirectoryRemoteSubAddr2
This is the second remote subaddress associated with this
entry. - For MX: Size=6 , Default=0 (6 characters) - For KM: Size=4 , Default=blank (4 characters) |
OctetStringr/w | .1.3.6.1.4.1.164.3.2.3.2.16.3.1.14 |
prtLogicalCnfgTable
table.1.3.6.1.4.1.164.3.2.3.2.17.1
·
1 row entry
·
6 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtLogicalCnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.17.1.1.1 |
||||||||||||||||||
|
prtLogicalSltIdx
Slot Index.
For ISDN BRI Ports of MX300/30, io1(5) = isdn1(5) and io2(6) = isdn2(6). |
Enumeration Constraints: range: 0-999 |
.1.3.6.1.4.1.164.3.2.3.2.17.1.1.2 |
||||||||||||||||||
|
prtLogicalPrtIdx
This attribute indicates a unique port number.
This port number should be an internal port number: inPrt1(101)->inPrt50(150), linkSel1(200)->linkSel50(250), encaps1(300)-> encaps50(350), huntGr1(101) -> huntGr10(110). |
SNMPv2-SMIInteger32 Constraints: range: 0-99Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.17.1.1.3 |
||||||||||||||||||
|
prtLogicalConnect
This attribute indicates whether the port should be considered
in any of the mux algorithms. |
Enumerationr/w Constraints: range: 0-257 |
.1.3.6.1.4.1.164.3.2.3.2.17.1.1.4 |
||||||||||||||||||
|
prtLogicalFunction
This parameter defines the function of the relevant channel.
|
Enumerationr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.2.3.2.17.1.1.5 |
||||||||||||||||||
|
prtLogicalRowStatus
This parameter allows the NMS to create/delete logical ports.
The only possible supported RowStatus vaules are active (1) and destroy (6). |
SNMPv2-TCRowStatusr/w Enumerated Values:
Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.3.2.3.2.17.1.1.6 |
linkSelectorCnfgTable
table.1.3.6.1.4.1.164.3.2.3.2.17.2
·
1 row entry
·
7 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
linkSelectorCnfgIdx
This attribute indicates the Idx of
the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.17.2.1.1 |
||||||||||||||||||||||||||
|
linkSelectorSltIdx
Slot Index
|
Enumeration | .1.3.6.1.4.1.164.3.2.3.2.17.2.1.2 |
||||||||||||||||||||||||||
|
linkSelectorPrtIdx
This attribute indicates a unique port number.
This port number should be internal port number: higher or equal to linkSeL1(201). |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.17.2.1.3 |
||||||||||||||||||||||||||
|
linkSelectorMaxIdleTime
Move to higher prioritized connected link
after this period of seconds of silence on the current link. 0=move immediately to higher prioritized connected link. UNIT is seconds. |
Integer32r/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.2.3.2.17.2.1.4 |
||||||||||||||||||||||||||
|
linkSelectorMode
If the link selector is in mode:
backup(2)=then the link with the lower priority will be used in case of failure of the higher priority link, bod(3)=bandwidth on demand or dynamic bandwidth allocation m… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.17.2.1.5 |
||||||||||||||||||||||||||
|
linkSelectorRevert
If the link selector is in mode backup:
auto(2)=return automatically to Main link when it is OK. manual(3)=stays connected to backup link. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.17.2.1.6 |
||||||||||||||||||||||||||
|
linkSelectorMinBUSession
Minimum duration of a backup session before
returning to Main Link. Relevant in Backup Mode and when Revert is auto(2). Value 255 is for NEVER which means never return to Main Link. UNIT is minutes. |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.17.2.1.7 |
linkSelectorPLinkTable
table.1.3.6.1.4.1.164.3.2.3.2.17.3
·
1 row entry
·
8 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
pLinkCnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg. |
Integer32 | .1.3.6.1.4.1.164.3.2.3.2.17.3.1.1 |
||||||||||||||||||||||||
|
pLinkSltIdx
Slot Index
|
Enumeration | .1.3.6.1.4.1.164.3.2.3.2.17.3.1.2 |
||||||||||||||||||||||||
|
pLinkPrtIdx
This attribute indicates a unique port number.
This port number should be the link selector number. |
Integer32 Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.2.3.2.17.3.1.3 |
||||||||||||||||||||||||
|
pLinkIdx
This index is the row number.
|
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.17.3.1.4 |
||||||||||||||||||||||||
|
pLinkSlotNu
The slot of the prioritized link.
For ISDN BRI ports of MX300/30, io1(5) = isdn1(5) and io2(6) = isdn2(6). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.17.3.1.5 |
||||||||||||||||||||||||
|
pLinkPortNu
The port of the prioritized link.
Value 100 is for noConnect. |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.17.3.1.6 |
||||||||||||||||||||||||
|
pLinkPrioNu
The priority of the prioritized link.
MIN=1...., MAX=8. |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.17.3.1.7 |
||||||||||||||||||||||||
|
pLinkVRate
The rate to use with this link.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.17.3.1.8 |
prtFrPlusCnfgTable
table.1.3.6.1.4.1.164.3.2.3.2.18.1
·
1 row entry
·
4 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtFrPlusCnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.18.1.1.1 |
||||||||||||||||||||||||||
|
prtFrPlusSltIdx
Slot Index.
For ISDN BRI Ports of MX300/30, io1(5) = isdn1(5) and io2(6) = isdn2(6). |
Enumeration | .1.3.6.1.4.1.164.3.2.3.2.18.1.1.2 |
||||||||||||||||||||||||||
|
prtFrPlusPrtIdx
This attribute indicates a unique port number.
This port number should be: - for ISDN cards: inPrt1(101)->inPrt50(150) - for MHS1 card : exPrt1(1) - for MHS3, MLS3 cards: exPrt1(1)->exPrt3(3) - for MLS6 cards: exPrt1(1… |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.18.1.1.3 |
||||||||||||||||||||||||||
|
prtFrPlusNotSegmentedPriorities
This parameter is relevant only for FR+ protocol and
asks the MXcess NOT to segment data with specified priorities: from LSB: bit 1 is for priority 1, bit 2 is for priority 2, .... till bit 7 for priority 7. - a … |
OctetStringr/w | .1.3.6.1.4.1.164.3.2.3.2.18.1.1.4 |
prtMl4CnfgTable
table.1.3.6.1.4.1.164.3.2.3.2.19.1
·
1 row entry
·
22 columns
This is an extension table for MTML-4 card parameters.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtMl4CnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg. The write operation is valid only to the TmpCnfg. |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.164.3.2.3.2.19.1.1.1 |
||||||||||||||||
|
prtMl4SltIdx
This attribute indicates a unique slot position where
the module is inserted. |
Enumeration Constraints: range: 1-65535 |
.1.3.6.1.4.1.164.3.2.3.2.19.1.1.2 |
||||||||||||||||
|
prtMl4PrtIdx
This attribute indicates a unique port number.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.19.1.1.3 |
||||||||||||||||
|
prtMl4SigProfile
This object indicates the Signaling Profile of the port.
none - when the Frame is G732N (no MF) or Unframed. p1 = profile 1 p2 = profile 2 p3 = profile 3 p4 = profile 4 p5 = profile 5 perTS = when Signaling Profil… |
Enumerationr/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.164.3.2.3.2.19.1.1.4 |
||||||||||||||||
|
prtMl4CGA
This object selects the method used to signal the CGA state
to the other end, through the main link. 'none' - non-transparent mode. When one of the links (main) will be in Out Of Service state, both … |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.5 |
||||||||||||||||
|
prtMl4Oos
'idle' = '0' = on-hook, idle state
'busy' = '1' = off-hook, busy state 'forcedIdle' = SP = both A and B signaling bits are forced to '0' during out-of-service periods. 'forcedBusy' = MK = both A and B sig… |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.6 |
||||||||||||||||
|
prtMl4VoiceOos
Voice Out-Of-Service code. Valid range: (0 - FF HEX).
For agents that do not support this feature, the value will always be 0. |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.19.1.1.7 |
||||||||||||||||
|
prtMl4DataOos
Data Out-Of-Service code. Valid range: (0 - FF HEX).
For agents that do not support this feature, the value will always be 0. |
OctetStringr/w | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.8 |
||||||||||||||||
|
prtMl4Service
Link Service.
leasedLine - usual TDM interface. v51 - V5.1 interface. v52Master - V5.2 Link to Local Exchange. v52Slave - a ML that is transferred to the v52Master. |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.9 |
||||||||||||||||
|
prtMl4IpAddress
IP Address of the port.
|
RFC1155-SMIIpAddressr/w Constraints: range: 1-255Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.3.2.3.2.19.1.1.10 |
||||||||||||||||
|
prtMl4IpMask
IP subnet mask of the port.
|
RFC1155-SMIIpAddressr/w Enumerated Values:
Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.3.2.3.2.19.1.1.11 |
||||||||||||||||
|
prtMl4SignalingMode
Refers to the signaling mode of the port (or framer module).
notApplicable(1)- means that no framer is needed for this port (no signaling), or that this object is not relevant. cas(2) means Channel Associated Sig… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.19.1.1.12 |
||||||||||||||||
|
prtMl4EchoCanceler
Echo canceler activation.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.13 |
||||||||||||||||
|
prtMl4OosErrorSource
OOS (Out-of-Service) Error Source.
This object is applicable for T1 ports only. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.19.1.1.14 |
||||||||||||||||
|
prtMl4OosEntryThreshold
This object defines the number of Errors per Second that determine the
minimum unacceptable noise level. This value will be the Entry Threshold to the OOS (Out-of-Service) state. This object is applicable only when prt… |
Integer32r/w | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.15 |
||||||||||||||||
|
prtMl4OosExitThreshold
This object defines the number of consecutive Error-Free-Seconds before
going from OOS state to Normal state. This value will be the Exit Threshold from the OOS (Out-of-Service) state. Units=seconds This object is a… |
Integer32r/w | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.16 |
||||||||||||||||
|
prtMl4LogicalLinkId
This object defines for a V5.2 Master ML the Logical Link Id.
Valid values are: 0..256. NA=257. |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.19.1.1.17 |
||||||||||||||||
|
prtMl4DedicatedTs
A unique number to identify Dedicated TS of the E1 port (V5.2).
It is applicable only when prtMl4Service=v52Slave and prtExPh1MlInbandMng selected is dedicatedTs, dedicatedPpp or dedicatedFr. 1..31 - Dedicated TS of E1… |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.19.1.1.18 |
||||||||||||||||
|
prtMl4RemCrc
This object indicates whether the E1 of the Remote device
connected to this E1 port, will have CRC-4 or not. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.19.1.1.19 |
||||||||||||||||
|
prtMl4CrossConnectLevel
This object indicates whether the cross connect is
on DS1 or DS0 (time-slots) level. When cross connect level is ds1, Destination Slot is indicated by prtGenCnfgLinkToSlot, Destination Port is indicated by prtGenCnf… |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.20 |
||||||||||||||||
|
prtMl4PppEchoFailDetection
This object indicates whether the PPP Echo is taken into account
for its Fail Detection. This object is relevant when Inband Mng between devices is Dedicated TS PPP. Default=Disable. Enable - will be selected main… |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.21 |
||||||||||||||||
|
prtMl4EcanCasControl
This object enables/disables ECAN (Echo Canceller) control activation/deactivation
sent via the A, B, C, D multiframe signaling BITs. |
Enumerationr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.2.3.2.19.1.1.22 |
prtAcmCnfgTable
table.1.3.6.1.4.1.164.3.2.3.2.20.1
·
1 row entry
·
6 columns
This is a table for ACM port parameters.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
prtAcmCnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg. The write operation is valid only to the TmpCnfg. |
Integer32 | .1.3.6.1.4.1.164.3.2.3.2.20.1.1.1 |
||||
|
prtAcmSltIdx
This attribute indicates a unique slot position where
the module is inserted. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.20.1.1.2 |
||||
|
prtAcmPrtIdx
This attribute indicates a unique port number.
|
Enumeration | .1.3.6.1.4.1.164.3.2.3.2.20.1.1.3 |
||||
|
prtAcmConnect
This attribute indicates whether the port should be
connected or not. Only a connected port can perform activity. |
Enumerationr/w Constraints: range: 0-255 |
.1.3.6.1.4.1.164.3.2.3.2.20.1.1.4 |
||||
|
prtAcmActiveState
This attribute indicates the Electric Active State of the port.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.20.1.1.5 |
||||
|
prtAcmAlrString
Alarm string selected by user for the Inbound ports.
This object is applicable only for the Inbound Ports: ext-5..ext-12. For the Outbound Ports (ext-1..ext-4), the size of this string will be 0. |
OctetStringr/w | .1.3.6.1.4.1.164.3.2.3.2.20.1.1.6 |
prtE2CnfgTable
table.1.3.6.1.4.1.164.3.2.3.2.21.1
·
1 row entry
·
5 columns
This is a table for E2 port parameters.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
prtE2CnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg. The write operation is valid only to the TmpCnfg. |
Integer32 | .1.3.6.1.4.1.164.3.2.3.2.21.1.1.1 |
|
prtE2SltIdx
This attribute indicates a unique slot position where
the module is inserted. |
Enumeration | .1.3.6.1.4.1.164.3.2.3.2.21.1.1.2 |
|
prtE2PrtIdx
This attribute indicates a unique port number.
|
Enumeration | .1.3.6.1.4.1.164.3.2.3.2.21.1.1.3 |
|
prtE2Connect
This attribute indicates whether the port should be
connected or not. Only a connected port can perform activity. |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.21.1.1.4 |
|
prtE2MngOnNationalBit
This attribute indicates whether National Bit will be used for
Management or not. |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.21.1.1.5 |
prtLanWanCnfgTable
table.1.3.6.1.4.1.164.3.2.3.2.22.1
·
1 row entry
·
14 columns
This is a table for Lan-Wan port parameters.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtLanWanCnfgIdx
This object indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg. The write operation is valid only to the TmpCnfg. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.22.1.1.1 |
||||||||||
|
prtLanWanSltIdx
This object indicates a unique slot position where the module is inserted.
|
Enumeration | .1.3.6.1.4.1.164.3.2.3.2.22.1.1.2 |
||||||||||
|
prtLanWanPrtIdx
This object indicates a unique number to identify a port
in a specific card. Generally, for MP-210X/2200, the Port Index will be according to the external/internal port number: - exPrtX : X - inPrtX : 100 + X For FCD… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.22.1.1.3 |
||||||||||
|
prtLanWanMode
This object determines the working mode of this port.
For FCD155, layer3SubnetSwitch is not applicable |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.22.1.1.4 |
||||||||||
|
prtLanWanDestIf
This object determines the Destination Interface for the frames
received by this port. - Switching Table = 100 (it means that the destination interface will be determined by the Switching Ta… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.22.1.1.5 |
||||||||||
|
prtLanWanEgressVlanMode
This object determines what to do with the VLAN frames that exit
via the WAN side of the port. This object is not applicable when prtLanWanMode=l3SubnetSwitch(4). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.22.1.1.6 |
||||||||||
|
prtLanWanL2Protocol
L2 Protocol.
When prtLanWanMode=l3SubnetSwitch(4), the only valid value is ppp(3). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.22.1.1.7 |
||||||||||
|
prtLanWanStpPriority
The value of the priority field which is contained in the first
(in network byte order) octet of the (2 octet long) Port ID. |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.22.1.1.8 |
||||||||||
|
prtLanWanStpCost
The contribution of this port to the path cost of paths towards
the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed o… |
Integer32r/w | .1.3.6.1.4.1.164.3.2.3.2.22.1.1.9 |
||||||||||
|
prtLanWanToLanVlanMode
This object determines what to do with the VLAN frames that come from
WAN side of the port and exit towards one of the LAN ports. This object is applicable only when prtLanWanDestIf=100 or 101 (Switching Table or inPrt… |
Enumerationr/w | .1.3.6.1.4.1.164.3.2.3.2.22.1.1.10 |
||||||||||
|
prtLanWanVlanId
This is the VLAN Id attached to a frame, when the relevant
Vlan Mode (prtLanWanEgressVlanMode or prtLanWanToLanVlanMode) is tag or doubleTag. 0=not applicable. |
Integer32r/w | .1.3.6.1.4.1.164.3.2.3.2.22.1.1.11 |
||||||||||
|
prtLanWanVlanPriority
This is the VLAN Priority attached to a frame, when the relevant
Vlan Mode (prtLanWanEgressVlanMode or prtLanWanToLanVlanMode) is tag or doubleTag. Valid values: 0..7 255=not applicable. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.22.1.1.12 |
||||||||||
|
prtLanWanMtu
The size of the largest packet which can be sent/received on the interface,
specified in octets. Valid values change per device. 0=not applicable. |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.2.3.2.22.1.1.13 |
||||||||||
|
prtLanWanVlanType
This oject indicates type of VLAN this port is assigned to.
Port Base Vlan parameters are defined by objects under radBridgePortBaseVlan |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.2.3.2.22.1.1.14 |
sysDclTable
table.1.3.6.1.4.1.164.3.3.1.2.2.1
·
1 row entry
·
10 columns
All the entries of this table are identical (have the same value) for all the configurations (1..255) except the TmpCnfg. The write operation into the Table Objects is valid only for the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
sysDclCnfgIdx
This object indicates the Idx of the Cnfg(1..255)
being accessed ; Idx of 255 relates to the TmpCnfg. This object is identical for all the configurations (1..255). Only the TmpCnf(255) might have a different value. Fo… |
Integer32 | .1.3.6.1.4.1.164.3.3.1.2.2.1.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysDclRedundancy
DCL redundancy desired state.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.3.1.2.2.1.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysDclActiveCl
Active desired DCL.
When 'auto' is selected, the system automatically selects the active DCL. |
Enumerationr/w | .1.3.6.1.4.1.164.3.3.1.2.2.1.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysDclFlipDelay
If one DCL flip occurred and a second one should be
performed, the time from the previous flip is checked. If the time is shorter than the delay specified here, the system should delay the flip operation until time reac… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.1.2.2.1.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysDclFlipUponStnClk
This object allows user to decide (yes/no) if Agent should Flip from
one DCL card to another, when there is Station Clock Fail in the Online DCL card. |
Enumerationr/w | .1.3.6.1.4.1.164.3.3.1.2.2.1.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysDclChFailThreshold
This object indicates the number of failed channels that will trigger the
redundancy procedure. |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.1.2.2.1.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysDclChPriority
This object indicates the Priority for all the channels in the Main Access
(Common Logic) card. Each channel is represented by 1 bit. The order of the bits in each byte is from Right to Left (LSB Bit to MSB) starting … |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.1.2.2.1.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysDclConfigDownloadSrc
In case of mismatch between the 2 CL card's configuration, the user can decide
which card has the suitable configuration. The selected configuration will be downloaded from card A to card B if the value is dclA(2) or f… |
Enumerationr/w | .1.3.6.1.4.1.164.3.3.1.2.2.1.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysDclSwDownloadSrc
In case of mismatch between the 2 CL card's software, the user can decide
which card has the suitable SW. The selected SW will be downloaded from card A to card B if the value is dclA(2) or from card B to card A if the… |
Enumerationr/w Constraints: range: 0-255 |
.1.3.6.1.4.1.164.3.3.1.2.2.1.1.9 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysDclRedundancyStatus
Bit map representing current Redundancy Status.
bit 0 - Indicates mismatch between the 2 CL cards' Configuration bit 1 - Indicates mismatch between the 2 CL cards' Software. bit 2 - Indicates CL card A Absence. bi… |
Bits Constraints: range: 0-255 |
.1.3.6.1.4.1.164.3.3.1.2.2.1.1.10 |
sysDclCopyDbTable
table.1.3.6.1.4.1.164.3.3.1.2.2.3
·
1 row entry
·
2 columns
This table enables to copy a cofiguration from the Offline Dcl to the Online Dcl.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
sysDclCopyDbIdx
This object indicates the Idx of the Cnfg(1..255)
being accessed. |
Integer32 | .1.3.6.1.4.1.164.3.3.1.2.2.3.1.1 |
|
sysDclCopyDbCmd
When this command is sent to the agent, on(3), the Database
specified (Db Idx), will be copied from the Offline Dcl to the Online Dcl. Afterwards the value of this object will automatically change to off(2). |
Enumerationr/w | .1.3.6.1.4.1.164.3.3.1.2.2.3.1.2 |
sysSErrListTable
table.1.3.6.1.4.1.164.3.3.1.3.13
·
1 row entry
·
3 columns
A table.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
sysSErrType
The errors are recorded in the agent, in two separate lists,
according to their type: error or warning. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.1.3.13.1.1 |
||||||||||||||||||||||||||
|
sysSErrIdx
Unique index number to identify an entry in the error
or warning list . The maximum value cannot exceed the value of 'sysSNoOfSanityCheckErr' (actually, the sum of the Errors list max. index and the Warning list max. … |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.1.3.13.1.2 |
||||||||||||||||||||||||||
|
sysSErrDescription
This object is a full text description of the sanity check
error including error code, IO slot and port numbers related to the code . |
OctetString Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.1.3.13.1.3 |
sysSRdnFlipTable
table.1.3.6.1.4.1.164.3.3.1.3.18
·
1 row entry
·
6 columns
This table includes all the Flip events due to I/O Redundancy since last Clear command of this table.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
sysSRdnFlipIdx
Unique index number to identify an entry in the Redundancy Flip list.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.1.3.18.1.1 |
||||||
|
sysSRdnFlipSlot
The slot number from which Flip was performed.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.1.3.18.1.2 |
||||||
|
sysSRdnFlipPort
The port number from which Flip was performed.
For DXC: For external ports the convention used will be: - first two digits will be: (IO slot number+10) - last one/two digits will be the port number within the card, in … |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.1.3.18.1.3 |
||||||
|
sysSRdnFlipCause
The last cause that caused the Flip from the Slot (Port)
of sysSRdnSlot, sysSRdnPort. |
SNMPv2-TCDisplayString Enumerated Values:
Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.3.1.3.18.1.4 |
||||||
|
sysSRdnFlipDate
Flip event Date. The format will be the one selected by user for
sysSDateFormat. |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.3.1.3.18.1.5 |
||||||
|
sysSRdnFlipTime
Flip event Time. The format will be hh:mm:ss.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.3.1.3.18.1.6 |
sysSBusTable
table.1.3.6.1.4.1.164.3.3.1.3.21
·
1 row entry
·
4 columns
This table includes data and status about the internal DXC BUS.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
sysSBusPortIdx
The DXC BUS port number:
- first two digits will be: (IO slot number+10) - last one/two digits will be the Bus port number, in odd numbers: port1 = 1 port2 = 3 Example: port2 of IO slot 11 will be: 213. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.1.3.21.1.1 |
||||||||||||
|
sysSBusStatus
The Status of sysSBusPortIdx.
free - not used physical - captured by the port of the card physically installed virtual - captured virtually by another port. Example: DIM port (by Destination) or by Transp… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.1.3.21.1.2 |
||||||||||||
|
sysSBusCapturePort
The Port that Captured the sysSBusPortIdx.
- if sysSBusStatus=free, the value will be 'none'=0 - else, if sysSBusStatus=fixed, the value will be: sysSBusPortIdx - else, the value will be according to the port index … |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.1.3.21.1.3 |
||||||||||||
|
sysSBusUtilization
Utilization of sysSBusPortIdx resources, in percent [%].
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.1.3.21.1.4 |
sysSRdnCmdTable
table.1.3.6.1.4.1.164.3.3.1.3.22
·
1 row entry
·
3 columns
This table includes commands used for IO Redundancy.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
sysSRdnEnforcedChannel
This is a command to override all switching considerations
and enforce use of primary/ secondary connection only. noEnforcement - cancels the state of override and goes back to usual switching cons… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.1.3.22.1.1 |
||||||
|
sysSRdnLockFlip
This is a command to lock the Redundancy flip for this redundancy couple.
Default = off(2). |
Enumerationr/w | .1.3.6.1.4.1.164.3.3.1.3.22.1.2 |
||||||
|
sysSRdnManualFlip
This is a command to move to manual Redundancy flip mode for this redundancy couple.
Default = off(2). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.1.3.22.1.3 |
sysSAlrTable
table.1.3.6.1.4.1.164.3.3.1.4.1
·
1 row entry
·
7 columns
List of system level current existing alarms .
An entry in table.
Indexes
sysCRdnCnfgIdx sysCRdnPrimeSlot sysCRdnPrimePort
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
sysSAlrIdx
An index number of the current system alarms.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.1.4.1.1.1 |
||||||||||||||||||||||||||||||||
|
sysSAlrCode
This object indicates a code related to a specific
alarm description. The list of codes and their related descriptions will be sent to NMS request (for display purpose) by alrGenTable. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.1.4.1.1.2 |
||||||||||||||||||||||||||||||||
|
sysSAlrState
This object indicates the alarm Severity.
|
Enumeration | .1.3.6.1.4.1.164.3.3.1.4.1.1.3 |
||||||||||||||||||||||||||||||||
|
sysSAlarmMask
Alarm Mask is : on/off.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.1.4.1.1.4 |
||||||||||||||||||||||||||||||||
|
sysSAlarmInvert
Alarm Invert is : on/off.
|
Enumeration | .1.3.6.1.4.1.164.3.3.1.4.1.1.5 |
||||||||||||||||||||||||||||||||
|
sysSAlarmOnOff
Alarm state is : on/off.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.1.4.1.1.6 |
||||||||||||||||||||||||||||||||
|
sysSAlarmCounter
A counter - how many times the alarm occured (ON) since last
clear operation or since last Reset. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.1.4.1.1.7 |
sysBufferAlrTable
table.1.3.6.1.4.1.164.3.3.1.5.1
·
1 row entry
·
9 columns
List of current existing alarms (of all levels).
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
sysBufferAlrIdx
An index number of the current alarms.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.1.5.1.1.1 |
||||||||
|
sysBufferAlrCode
This object indicates a code related to a specific
alarm description. The list of codes and thir related descriptions will be known by the NMS (for display purpose) and will appear in the unit's user manual. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.1.5.1.1.2 |
||||||||
|
sysBufferAlrState
This object indicates the alarm type.
minor/major/warning/critical - indicates appearance of the problem and the type. event - indicates occurence of an event. off - indicates disappearance … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.1.5.1.1.3 |
||||||||
|
sysBufferAlrSlot
The slot number this alarm refers to.
When the alarm refers to a system function OR the DACS agent is a stand-alone unit, the value will be 'notApplicable(255)'. local/remote - for OP-4 device. |
Enumeration | .1.3.6.1.4.1.164.3.3.1.5.1.1.4 |
||||||||
|
sysBufferAlrPort
The port number this alarm refers to.
If the port number is irrelevant to this alarm (if it is a system/card level alarm) the value will be 9999. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.1.5.1.1.5 |
||||||||
|
sysBufferAlrDate
The date when the alarm occured. The format will be according
to sysSDateFormat. |
OctetString | .1.3.6.1.4.1.164.3.3.1.5.1.1.6 |
||||||||
|
sysBufferAlrTime
The time when the alarm occured.
|
OctetString | .1.3.6.1.4.1.164.3.3.1.5.1.1.7 |
||||||||
|
sysBufferAlrUpTime
The time when the alarm occured.
This parameter holds the sysUpTime value when the alarm occured. |
RFC1155-SMITimeTicks Textual Convention: RFC1155-SMITimeTicks Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.3.1.5.1.1.8 |
||||||||
|
sysBufferAlrInfo
This parameter includes information about the alarm (additional to the Description).
|
SNMP-FRAMEWORK-MIBSnmpAdminString Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.3.1.5.1.1.9 |
sysCClkSrcTable
table.1.3.6.1.4.1.164.3.3.1.6.1
·
1 row entry
·
12 columns
All the entries of this table are identical (have the same value) for all the configurations (1..255) except the TmpCnfg. For devices with more than one configuration: The write operation into the Table Objects is valid only for the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
sysCClkCnfgIdx
This attribute indicates the Idx of the Cnfg being
accessed ; Idx of 255 relates to the TmpCnfg. It can be also a combination of the configuration number and the Card/Port/Other System index. |
Integer32 | .1.3.6.1.4.1.164.3.3.1.6.1.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysCClkSrcIdx
An index in the table. There are only two entries in the
table. master - refers Master clock parameters fallback - refers Fallback clock parameters |
Enumeration | .1.3.6.1.4.1.164.3.3.1.6.1.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysCClkSrcMode
This entry indicates the source the nodal timing is
locked to. none - is an invalid option for Master clock. internal - is an invalid option for Fallback clock . station - is an invalid option for a stand-alone un… |
Enumerationr/w Constraints: range: 0-30 |
.1.3.6.1.4.1.164.3.3.1.6.1.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysCClkSrcPrt
This entry is valid only when working in rxClk mode
(for IPmux1000 this entry will be valid whe working in LBT mode). For ACE2002 in case of invalid entry the return value will be 0. For other products … |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.1.6.1.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysCClkStationFreq
This entry indicates the frequency of the station clock
when the source is 'station'. The value will be applicable only when the sysCClkSrcMode is 'station'. |
Enumerationr/w | .1.3.6.1.4.1.164.3.3.1.6.1.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysCClkRevertiveTimeout
The time in seconds in which the system will monitor the higher
level clock source, before decision to revert to that clock. In case the time is zero, revertive mode will be disabled. |
SNMPv2-SMIInteger32r/w Constraints: range: 1-255Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.1.6.1.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysCClkStationIf
This entry indicates the electrical interface connected to the
station clock, when the source is 'station'. The value will be applicable only when the sysCClkSrcMode is 'station'. |
Enumerationr/w Constraints: range: 0-255 |
.1.3.6.1.4.1.164.3.3.1.6.1.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysCClkStationCableMode
This parameter indicates whether both Station clocks get their
clock from the same source (Y Cable)or each one get its clock independently. The value will be applicable only when the sysCClkSrcMode is 'station'. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.1.6.1.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysCClkStationOutState
This parameter indicates whether station clock can
send its clock to another device. The value will be applicable only when the sysCClkSrcMode is 'station'. |
Enumerationr/w | .1.3.6.1.4.1.164.3.3.1.6.1.1.9 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysCClkSsmBased
This parameter indicates whether clock source
will be selected based on receive clock quality, indicated in S1 byte inside SONET/SDH overhead, (encoded as SSM - Synchronization Status Messaging). It is relevant only … |
Enumerationr/w | .1.3.6.1.4.1.164.3.3.1.6.1.1.10 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysCClkSSubsystemSlot
This entry indicates the Slot from which the S Subsytem Source
will be taken. The value will be applicable only when the sysCClkSrcMode is 'sSubsystem'. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.1.6.1.1.11 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysCClkRecoveredID
This entry indicates the Recovered Clock ID.
The value will be applicable only when sysCClkSrcMode is 'recovered'. |
SNMPv2-SMIUnsigned32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.3.1.6.1.1.12 |
sysCnfgTable
table.1.3.6.1.4.1.164.3.3.1.6.2
·
1 row entry
·
10 columns
All the entries of this table are identical (have the same value) for all the configurations (1..255) except the TmpCnfg. The write operation into the Table Objects is valid only for the TmpCnfg entry.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
sysCnfgIdx
This attribute indicates the Idx of the Cnfg(1..255) being
accessed ; Idx of 255 relates to the TmpCnfg. For Gmux2000 the range limitation (1..255) was discarded since the Idx is computed as: <IO Card No.> x 1000 +… |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.1.6.2.1.1 |
||||||||||||
|
sysCMatrixMode
Indicates the TS Matrix Mode:
bidirectional - TS Assignment Matrix is symmetric. unidirectional - TS Assignment Matrix can be asymmetric. notApplicable - for agents that do not support this feature. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.1.6.2.1.2 |
||||||||||||
|
sysCIsdnFormat
ISDN format. This parameter controls the operation mode of
the ISDN ports. te - ISDN timing is derived from the signal received from the equipment it is connected to. nt - timing of the transmit path is locked to t… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.1.6.2.1.3 |
||||||||||||
|
sysCRoutingOnEth
Mng Routing Protocol on the online CL Ethernet port,
or on device Ethernet port dedicated for mangement. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.1.6.2.1.4 |
||||||||||||
|
sysCAutoConfigEnable
This object enables user to enable/disable activating
the Auto Configuration. When Auto Configuration is activated, the device learns its configuration Automatically from the Net it is connected to. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.1.6.2.1.5 |
||||||||||||
|
sysCIntTsAllocMode
This object enables user to select the mode of Internal TS
Allocation. static - user has to select for each Dynamic card port, the Maximum TSs expected to be connected (including future growth). This… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.1.6.2.1.6 |
||||||||||||
|
sysCBuPrimaryPort
This object enables the user to configure a Backup mechanism.
If a backup mechanism exists, it is possible to configure the primary port. The traffic will flow via the primary port when the port functionality is OK. … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.1.6.2.1.7 |
||||||||||||
|
sysCEnableLanOverTdm
This object enables/disables transferring traffic from the LAN port
to the TDM port. It is possible to enable only part of the traffic on the TDM port for security reasons or in order to minimize the bandwidth . |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.1.6.2.1.8 |
||||||||||||
|
sysCSs7FisuSuppression
SS7 Suppresion is used for SS7 Spoofing.
The SS7 spoofing terminates the keep alive messages from the local VMUX without sending them over the network, thus improving the bandwidth utilization. FISU means Fill in Se… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.1.6.2.1.9 |
||||||||||||
|
sysCBuRecMode
Recovery Mode. This object determines if after recovery
of the Primary Link (used in Vmux) it will become on-line again or not: auto - automatic. In this case, the failed Link will become on-line again after recover… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.1.6.2.1.10 |
sysCRdnTable
table.1.3.6.1.4.1.164.3.3.1.6.3
·
1 row entry
·
23 columns
Configuration of all Redundant I/O cards and ports. The write operation into the table objects is valid only for the TmpCnfg. A Slot/Port that have no Redundancy, will not exist in this table.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
sysCRdnCnfgIdx
This object indicates the Idx of the Cnfg(1..255) being
accessed ; Idx of 255 relates to the TmpCnfg. |
SNMPv2-SMIInteger32 Constraints: range: 0-255Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.1.6.3.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysCRdnPrimeSlot
The slot number of the Primary card of Redundancy.
The Primary card should be the card that user wishes to be the online card (usually the more important one). For some Redundancy modes the importance of the redundant … |
Enumeration Constraints: range: 0-255 |
.1.3.6.1.4.1.164.3.3.1.6.3.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysCRdnPrimePort
The port number.
For DXC: For external ports the convention used will be: - first two digits will be: (IO slot number+10) - last one/two digits will be the port number within the card, in odd numbers: port1 = 1 port2 =… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.1.6.3.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysCRdnSecSlot
The slot number of the Secondary card of Redundancy matching
the Primary slot. |
Enumerationr/w | .1.3.6.1.4.1.164.3.3.1.6.3.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysCRdnSecPort
The port number.
For DXC: For external ports the convention used will be: - first two digits will be: (IO slot number+10) - last one/two digits will be the port number within the card, in odd numbers: port1 = 1 port2 =… |
SNMPv2-SMIInteger32r/w Constraints: range: 1-255Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.1.6.3.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysCRdnMode
Redundancy Mode.
DXC supports: yCable(3), singleSlotProtection(6) and dualCableParallelTx(4) MP supports: yCable(3), dualCableParallelTx(4), onePlusOne(7) and oneToOne(8). (dualCableAIS and backup wer… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.1.6.3.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysCRdnRecMode
Recovery Mode. This object determines if after recovery
of the failed Primary card/port it will become on-line again or not: auto - automatic . In this case, the failed card/port will become on-line again after reco… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.1.6.3.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysCRdnRecTime
Redundancy Recovery Time (sec). After switching to the current
online card, the next switch can be performed only after a minimum time, indicated by this object. Valid Values: 0..300, 65535. 65535=NA. This object … |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.1.6.3.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysCRdnHwSwFlip
HW or SW decision for Redundancy Flip.
This object is applicable only for sysCRdnMode=singleSlotProtection. HW - decision is by I/O card SW - decision is by CL SW. |
Enumerationr/w | .1.3.6.1.4.1.164.3.3.1.6.3.1.9 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysCRdnRowStatus
This parameter allows NMS to create/delete entries of this table.
The possible supported RowStatus values are active (1) and destroy (6). For Vmux-2100 the supported values are: active (1), createAndGo (4… |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.3.3.1.6.3.1.10 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysCRdnOnline
Status - who is the Online (current) Redundancy Slot/Port.
This object shows only the Online Slot/Port regarding the Redundancy. mdlSActivity or prtGenActiveStatus of the same Slot/Port may be Offline. |
Enumeration | .1.3.6.1.4.1.164.3.3.1.6.3.1.11 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysCRdnSwitchingMode
This object defines which Self Healing Ring (SHR) SDH ring is used:
Uni Directional or BiDirectional. The type of the ring is defined according to the direction of traffic flow under normal working conditions. … |
Enumerationr/w | .1.3.6.1.4.1.164.3.3.1.6.3.1.12 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysCRdnFlipUponEvent
This object allows user to define if Flip to the other port will
be performed (or not), for certain possible events. Each event is represented by a bit. The value of the object is a sum of 2**n, according to the bits ha… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.1.6.3.1.13 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysCRdnLosOrLofTime
This parameter determines how much time to wait before switching,
after LOF or LOS are detected on the TDM Line. For Ipmux time is counted in msec. |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.1.6.3.1.14 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysCRdnEventsTimeWindow
This parameter determines the time window in which
to count events to trigger protection switching. For Ipmux time is counted in seconds. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.1.6.3.1.15 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysCRdnSequenceNumberThreshold
This parameter determines the number of Sequence Number errors
that should occur in the time window in order to cause switching. |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.1.6.3.1.16 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysCRdnBufferErrorsThreshold
This parameter determines the number of Buffer undeflow/ overflow events
occured in the time window that cause switching. |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.1.6.3.1.17 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysCRdnBuffUnderrunTime
This parameter determines how much time to wait before switching,
after jitter buffer underrun. Switching occurs if no frame arrives within that time. For Ipmux time is counted in msec. |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.1.6.3.1.18 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysCRdnPrimePriority
The Primary port priority.
In ETX2xx/2xxA: When selecting sysCRdnMode = manual (10), this parameter determines the forced active port: low - means that the secondary port is selected to be active … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.1.6.3.1.19 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysCRdnSecPriority
The Secondary port priority.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.3.1.6.3.1.20 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysCRdnWTR
Redundancy Wait to Restore (sec).
Valid Values: 0..999, 65535. 65535=NA. When the value <> 65535, the value of sysCRdnRecTime must be 65535. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.3.1.6.3.1.21 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysCRdnName
A textual name for the redundancy group.
|
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.3.1.6.3.1.22 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sysCRdnTxDownDurationUponFlip
This object defines the duration (in seconds) the active
port transmission is shut down after flip occurs. The transmission is shut down and then opened again (after the duration defined by this object), in order t… |
Unsigned32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.1.6.3.1.23 |
sysDbaseFlipTable
table.1.3.6.1.4.1.164.3.3.1.7.4
·
1 row entry
·
3 columns
Dbase Flip time and activation for every configuration.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
sysDbaseFlipIdx
This attribute indicates the Idx of the Cnfg being
the target Configuration. |
Integer32 | .1.3.6.1.4.1.164.3.3.1.7.4.1.1 |
||||
|
sysDbaseFlipTime
This attribute indicates the time (HH:MM) when this data
base will start being used by the Tmp config. |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.1.7.4.1.2 |
||||
|
sysDbaseFlipActivation
This attribute indicates if the Dbase flip will be
activated at the time specified for this configuration (enable) or not (disable). No more than one flip should be enabled for the same time. |
Enumerationr/w | .1.3.6.1.4.1.164.3.3.1.7.4.1.3 |
mdlSTable
table.1.3.6.1.4.1.164.3.3.2.1.1
·
1 row entry
·
18 columns
A table.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
mdlSSltIdx
A unique number to identify a slot position in the DACS.
The Kilomux should use enumerated values starting with kmx. For IPmux100 use values 1-13, 20. |
Enumeration Constraints: range: 0-255 |
.1.3.6.1.4.1.164.3.3.2.1.1.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlSCardType
This attribute indicates the type of the card installed
in the specific slot position. Only PS's are possible in the PS slots. Only CL's are possible in the CL slots. Only IO modules are possible in the IO slots. Kmux … |
Enumeration | .1.3.6.1.4.1.164.3.3.2.1.1.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlSHwVer
This attribute indicates the Hardware version of the
card installed in the specific slot position. |
OctetString | .1.3.6.1.4.1.164.3.3.2.1.1.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlSSwVer
This attribute indicates the Software version of the
card installed in the specific slot position. |
OctetString Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.2.1.1.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlSAlarmStatus
Indicates the current alarm state only for card level.
This object will be set to: - critical(7): when there is at least one active (ON) critical alarm . - major (3): when there is no active critical alar… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.2.1.1.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlSAlarmStatusAll
Indicates the current card alarm state including the
lower level: card, port. This object will be set to: - critical(7): when there is at least one active (ON) critical alarm . - major (3): when there i… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.2.1.1.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlSTestStatus
This attribute will be on(3) when there is at least
one test running on a port of the module; otherwise the value will be off(2). |
Enumeration | .1.3.6.1.4.1.164.3.3.2.1.1.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlSHwStatus
This attribute will be fail(2) when a HW FAIL exists
on this module (discovered by periodic self test); otherwise the value will be ok(3). |
Enumeration | .1.3.6.1.4.1.164.3.3.2.1.1.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlSActivity
notApplicable - when the slot is empty (no module)
offline(1) - when the module is not active (redundant) online (2) - when the module is active . |
Enumeration | .1.3.6.1.4.1.164.3.3.2.1.1.1.9 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlSAlrClearCmd
Setting this attribute to ON, will enforce a clear
operation on the card level alarms . Upon completion, the value will automatically change to off(2). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.2.1.1.1.10 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlSAlrClearAllCmd
Setting this attribute to ON, will enforce a clear
operation on card and port level alarms . Upon completion, the value will automatically change to off(2). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.2.1.1.1.11 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlSAlrMaskAll
on(3) - will cause masking of all the card level alarms.
These alarms will not be sent to NMS and will not be taken into account for Alarms Status. off(2) - will unmask all card level alarms except those masked via t… |
Enumerationr/w | .1.3.6.1.4.1.164.3.3.2.1.1.1.12 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlSCmd
General object for any special command at card level.
0=NotApplicable, for cards that don't support this object. For KML.10(ISDN) card of KM-2100, the object will indicate Manual Call Command in Switch … |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.2.1.1.1.13 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlSReset
Reset action to be performed on the module.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.2.1.1.1.14 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlSRebuildFrame
Applicable only for KiloMux Main Link cards only.
'2' = off, this will be always the Get value. '3' = on, this is the Set command used to Rebuild the Frame. Upon completing the operation, the value will automatically … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.2.1.1.1.15 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlSBackupSwVer
This attribute indicates the Backup Software version of the
card installed in the specific slot position. |
OctetString | .1.3.6.1.4.1.164.3.3.2.1.1.1.16 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlSSecondaryBackupSwVer
This attribute indicates the Secondary Backup Software version of the
card installed in the specific slot position. |
OctetString | .1.3.6.1.4.1.164.3.3.2.1.1.1.17 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlSPiggybackVer
This attribute indicates the Piggyback version of the
card installed in the specific slot position. |
OctetString | .1.3.6.1.4.1.164.3.3.2.1.1.1.18 |
mdlCTable
table.1.3.6.1.4.1.164.3.3.2.1.2
·
1 row entry
·
6 columns
A table.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
mdlCConfigIdx
This object indicates the Configuration number (1..255)
referred. Value of 255 specifies the TmpCnfg (Scratch). |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.2.1.2.1.1 |
||||||
|
mdlCSlotIdx
This object indicates a unique number of the slot position
in which the module is inserted. The Kilomux should use enumerated values starting with kmx. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.2.1.2.1.2 |
||||||
|
mdlCProgCardType
This object indicates the card type assigned to the specific
slot in the common configuration. This object is identical for all the configurations (1..255). Only the TmpCnf(255) might have a different value. The write… |
Enumerationr/w | .1.3.6.1.4.1.164.3.3.2.1.2.1.3 |
||||||
|
mdlCNoOfExtPrt
Number of external ports in the programmed module of
the specific slot position |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.2.1.2.1.4 |
||||||
|
mdlCNoOfIntPrt
Number of internal ports in the programmed module of
the specific slot position. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.2.1.2.1.5 |
||||||
|
mdlCParam
General configuration object at card level (per configuration).
NotApplicable=0, for cards that don't support this object. For D8U and D16U cards of DXC, the object will indicate the port on which BERT … |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.2.1.2.1.6 |
mdlAlrTable
table.1.3.6.1.4.1.164.3.3.2.1.3.1
·
1 row entry
·
8 columns
The list of card alarms.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
mdlAlrIdx
A unique number to identify an entry in the alarm status
table. Users should use the get next function to read this table because the indexes are not consecutive |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.2.1.3.1.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlAlrSltIdx
This attribute indicates the desired slot position.
The Kilomux should use enumerated values starting with kmx. |
Enumeration | .1.3.6.1.4.1.164.3.3.2.1.3.1.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlAlrCode
This object indicates a code related to a specific
alarm description. The list of codes and their related descriptions will be sent to NMS request (for display purpose) by alrGenTable. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.2.1.3.1.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlAlrState
This object indicates the card alarm severity.
|
Enumeration | .1.3.6.1.4.1.164.3.3.2.1.3.1.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlAlarmMask
Alarm Mask is : on/off.
|
Enumeration | .1.3.6.1.4.1.164.3.3.2.1.3.1.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlAlarmInvert
Alarm Invert is : on/off.
|
Enumeration | .1.3.6.1.4.1.164.3.3.2.1.3.1.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlAlarmOnOff
Alarm state is : on/off.
|
Enumeration Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.3.2.1.3.1.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||||||
|
mdlAlarmCounter
A counter - how many times the alarm occured (ON) since last
clear operation or since last Reset. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.2.1.3.1.1.8 |
mdlAlrMaskTable
table.1.3.6.1.4.1.164.3.3.2.1.3.2
·
1 row entry
·
2 columns
The list of card masked alarms.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
mdlAlrMaskSltIdx
This attribute indicates the desired slot position.
The Kilomux should use enumerated values starting with kmx. |
Enumeration | .1.3.6.1.4.1.164.3.3.2.1.3.2.1.1 |
|
mdlAlrMask
This object is a mask that indicates which card level
alarms are masked. The masked alarms (their bit is set to '1') are neither sent to the manager, nor taken into account for alarm status and LEDs. Bit no. = Alarm c… |
OctetStringr/w | .1.3.6.1.4.1.164.3.3.2.1.3.2.1.2 |
mdlClTable
table.1.3.6.1.4.1.164.3.3.2.2.1
·
1 row entry
·
5 columns
A table.
An entry in table.
Indexes
prtSAlarmPrtIdx prtSAlarmIdx
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
mdlClIdx
This object indicates the Cl slot referred.
|
Enumeration | .1.3.6.1.4.1.164.3.3.2.2.1.1.1 |
||||||||||
|
mdlClSwchStatus
This object indicates the status of the switches on
the referred DCL card. Each switch is represented by a bit. The status is a sum of 2**n, according to the bits. There are 4 switches: bit 0 SP-PAR (LSB) '1' - Defau… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.2.2.1.1.2 |
||||||||||
|
mdlClLastFlipDate
Date when last flip occured.
The format would be as specified by the sysSDateFormat. |
OctetString | .1.3.6.1.4.1.164.3.3.2.2.1.1.3 |
||||||||||
|
mdlClLastFlipTime
Time when last flip occured.
|
OctetString Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.2.2.1.1.4 |
||||||||||
|
mdlClLastFlipCause
The cause of last flip.
|
OctetString Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.2.2.1.1.5 |
mdlPsTable
table.1.3.6.1.4.1.164.3.3.2.3.1
·
1 row entry
·
3 columns
A table.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
mdlPsIdx
This object indicates the PS card referred.
|
Enumeration | .1.3.6.1.4.1.164.3.3.2.3.1.1.1 |
|
mdlPsStatus
This object indicates the status of the PS card.
|
Enumeration | .1.3.6.1.4.1.164.3.3.2.3.1.1.2 |
|
mdlPsTestResult
This object indicates the result of the PS card test.
ok (1) - the test passed successfully. f12V (2) - 12V FAIL was detected f5V (3) - 5V FAIL was detected. |
Enumeration | .1.3.6.1.4.1.164.3.3.2.3.1.1.3 |
prtGenParamTable
table.1.3.6.1.4.1.164.3.3.3.1.1
·
1 row entry
·
19 columns
A table.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtGenPrtIdx
This attribute indicates a unique number to identify a port.
The valid port number depends on the IO slot no., the installed card type and the port type: outside/external, inside/internal. In the Kilo… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.1.1.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtGenSlt
This attribute indicates a unique number to identify the slot where
the card is inserted in. When the unit is stand-alone, this object is not applicable and 255 will be used. The Kilomux should use the enumerated starti… |
Enumeration | .1.3.6.1.4.1.164.3.3.3.1.1.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtGenExtInt
This attribute describes the type of the designated port.
Exteral port is a port with a physical connector. Internal port might be of two types, one is a composite port which collects data of a few external ports i… |
Enumeration | .1.3.6.1.4.1.164.3.3.3.1.1.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtGenIfIndex
This attribute indicates the unique interface number
assigned to the port. The specific interface of this attribute is the same as the interface identified by the value of ifindex in MIB-II.If there is no interfac… |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.1.1.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtGenActiveStatus
This attribute describes the activity status of the port.
unknown(1) indicates that the information is not supported. notUsed(2) indicates that the port is not connected according to the active config. offLin… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.1.1.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtGenAlrStatus
Indicates the alarm state at port (ch) agent level.
This object will be: - critical(7): when there is at least one active (ON) critical alarm . - major (3): when there is no active critical alarm, but the… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.1.1.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtGenTestStatus
This attribute will be on(3) when there is at least one test
in progress (running) on the port; otherwise the value will be off(2). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.1.1.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtGenTestMask
This is a mask which indicates which tests from the
'prtGenTestCmd' list are allowed for the selected port. If a specific test is allowed, its respective bit will be SET in the mask : TEST … |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.1.1.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtGenTestCmd
Setting this object to a value as detailed furter on
(except 0) will initiate a test on the specific port, if the operation is allowed (according to TestMask). If the operation is not allowed, the mux will ignore the… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.1.1.1.9 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtGenTestRunning
This object indicates which tests are running currently on
the selected port (initiated by user and/or by the system). If a specific test is currently running on the port, its respective bit will be SET: … |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.1.1.1.10 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtGenType
This object describes the type of the selected port.
idsl - applicable for external ports of HS-U cards (of DXC) when interface is LT-1. |
Enumeration | .1.3.6.1.4.1.164.3.3.3.1.1.1.11 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtGenInterfaceType
This attribute indicates a unique HW interface type of the
selected port. Examples: - for T1 cards: DSU, CSU - for E1 cards: DSU, LTU - for HS cards: v35, rs422, x21 etc... |
OctetString Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.1.1.1.12 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtGenAlrClearCmd
Setting this attribute to ON, will enforce a clear
operation on the port level alarms . Upon completion, the value will automatically change to off(2). noOp - will be used by agents that do not support this f… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.1.1.1.13 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtGenAlrMaskAll
on(3) - will mask all the alarms of the selected port
off(2)- will unmask all alarms of the selected port except the ones selected by the prtAlrMaskTable. noOp - will be used by agents that do not support this … |
Enumerationr/w Constraints: range: 0-4 |
.1.3.6.1.4.1.164.3.3.3.1.1.1.14 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtGenParamStatus
This object indicates Status of parameters specific to the
selected port. - For a port that has no special status or is supported by prtSExHsfStatTable - 1 Octet: 00hex - For HS cards (Dxc cards) - 1 o… |
OctetString Constraints: range: 0-255 |
.1.3.6.1.4.1.164.3.3.3.1.1.1.15 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtGenRdnStatus
This object indicates if this port is part of a redundant pair and in
this case, if it is On or Off. none(1) - No redundancy or Not Applicable off (2) - the port is part of a redundant pair and it is … |
Enumeration | .1.3.6.1.4.1.164.3.3.3.1.1.1.16 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtGenTestMaskXP
This is an Expanded test mask of the prtGenTestMask object.
The prtGenTestMask object reached its maximum, being an Integer with 31 bits. This object indicates which tests from the 'prtGenTestCmdXP' list are allowed f… |
OctetString | .1.3.6.1.4.1.164.3.3.3.1.1.1.17 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtGenTestCmdXP
This is an Expanded test command of the prtGenTestCmd object.
The prtGenTestCmd object reached its maximum, being an Integer with 31 bits. Setting this object to a value as detailed furter on (except 0) will initiate a… |
OctetStringr/w | .1.3.6.1.4.1.164.3.3.3.1.1.1.18 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtGenTestRunningXP
This is an Expanded object of the prtGenTestRunning object.
The prtGenTestRunning object reached its maximum, being an Integer with 31 bits. This object indicates which tests are running currently on the selected port … |
OctetString | .1.3.6.1.4.1.164.3.3.3.1.1.1.19 |
prtGenTestDurationTable
table.1.3.6.1.4.1.164.3.3.3.1.2
·
1 row entry
·
3 columns
A table.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
prtGenTestPrtIdx
This attribute indicates a unique number to identify a port.
The valid port number depends on the IO slot no., the installed card type and the port type: outside/external, inside/internal. In the Kilo… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.1.2.1.1 |
||||||
|
prtGenTestIdx
This attribute indicates the test, the duration refers.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.1.2.1.2 |
||||||
|
prtGenTestDuration
This attribute indicates the maximum duration of executing
a test on the specific port. This entry applies to the specified test . The resolution will be a minute, and the maximum duration is limited to 30 minutes . A z… |
SNMPv2-SMIInteger32r/w Constraints: range: 0-4Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.1.2.1.3 |
prtGenTsTable
table.1.3.6.1.4.1.164.3.3.3.1.3
·
1 row entry
·
6 columns
The write operation into the Table's Objects is valid only for the TmpCnfg entry (Scratch),exept some products which enable direct writing to the ActiveCnfg. This is written in the respective product's spec.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtGenTsCnfgIdx
This attribute indicates the Idx of the Cnfg(1..255) being
accessed. Idx of 255 relates to the TmpCnfg. |
Integer32 | .1.3.6.1.4.1.164.3.3.3.1.3.1.1 |
||||||||||||||||||||||||||||||||||||||||||||
|
prtGenTsPrtIdx
This attribute indicates a unique port number.
The valid port number depends on the IO slot no., the installed card type and the port type: outside, inside, SP. In the DXC : - first two digits will be: (IO slot numb… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.1.3.1.2 |
||||||||||||||||||||||||||||||||||||||||||||
|
prtGenTsIdx
This attribute indicates a unique time slot position.
The valid time slots are 1..25 for T1 Card (25=Fbit) 0..31 for E1 or HS Card . In G732S-E1 lines time slot 16 is not valid for data, it is dedicated for multifra… |
SNMPv2-SMIInteger32 Constraints: range: 1-255Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.1.3.1.3 |
||||||||||||||||||||||||||||||||||||||||||||
|
prtGenTsType
The type of Timeslot.
If the source or destination port is an HS port,'TS Type' must be 'data'. nc - means that this TimeSlot is not connected. voice, data, vcMP - also mean that this TS is connected. mng - means t… |
Enumerationr/w | .1.3.6.1.4.1.164.3.3.3.1.3.1.4 |
||||||||||||||||||||||||||||||||||||||||||||
|
prtGenTsIConPrt
This attribute indicates the internally (In Mux)
connected port. The valid port number depends on the IO slot no., the installed card type and the port type: outside, inside, SP. * The outside ports will be the T1/E… |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.1.3.1.5 |
||||||||||||||||||||||||||||||||||||||||||||
|
prtGenTsIConTs
This attribute indicates a unique time slot position.
The valid time slots are 1..25 for T1 Card (25=Fbit) 0..31 for E1 (or HS) Card. In G732S-E1 lines time slot 16 is not valid for data, it is dedicated for multifr… |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.1.3.1.6 |
prtSAlarmTable
table.1.3.6.1.4.1.164.3.3.3.1.4.1
·
1 row entry
·
8 columns
A table.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtSAlarmIdx
A unique number to identify an entry in the alarm status
table. Users should use the get next function to read this table because the indexes are not consecutive. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.1.4.1.1.1 |
||||||||||||||||||||||||||||||||||||
|
prtSAlarmPrtIdx
This attribute indicates a unique number to identify a port.
The valid port number depends on the IO slot no., the installed card type and the port type: outside/external, inside/internal. In the Kilo… |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.1.4.1.1.2 |
||||||||||||||||||||||||||||||||||||
|
prtSAlarmCode
This object indicates a code related to a specific
alarm description. The list of codes and their related descriptions will be sent to NMS request (for display purpose) by alrGenTable. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.1.4.1.1.3 |
||||||||||||||||||||||||||||||||||||
|
prtSAlarmState
This object indicates the port alarm severity.
|
Enumeration | .1.3.6.1.4.1.164.3.3.3.1.4.1.1.4 |
||||||||||||||||||||||||||||||||||||
|
prtSAlarmMask
Alarm Mask is : on/off.
|
Enumeration | .1.3.6.1.4.1.164.3.3.3.1.4.1.1.5 |
||||||||||||||||||||||||||||||||||||
|
prtSAlarmInvert
Alarm Invert is : on/off.
|
Enumeration | .1.3.6.1.4.1.164.3.3.3.1.4.1.1.6 |
||||||||||||||||||||||||||||||||||||
|
prtSAlarmOnOff
Alarm state is : on/off.
|
Enumeration | .1.3.6.1.4.1.164.3.3.3.1.4.1.1.7 |
||||||||||||||||||||||||||||||||||||
|
prtSAlarmCounter
A counter - how many times the alarm occured (ON) since last
clear operation or since last Reset. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.1.4.1.1.8 |
prtAlrMaskTable
table.1.3.6.1.4.1.164.3.3.3.1.4.2
·
1 row entry
·
2 columns
A table.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
prtAlrMaskPrtIdx
This attribute indicates a unique number to identify a port.
The valid port number depends on the IO slot no., the installed card type and the port type: outside/external, inside/internal. In the Kilo… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.1.4.2.1.1 |
|
prtAlrMask
This object is a mask that indicates which port level
alarms are masked. The masked alarms (their bit is set to '1') are neither sent to the manager, nor taken into account for alarm status and LEDs. Bit no. = Alarm c… |
OctetStringr/w | .1.3.6.1.4.1.164.3.3.3.1.4.2.1.2 |
prtBertTable
table.1.3.6.1.4.1.164.3.3.3.1.5
·
1 row entry
·
16 columns
This table includes the BERT parameters, counters and commands. The configurable parameters: - prtBertPattern - prtBertInjectRate - prtBertTs are not Set per configuration (same for all Configurations) but start being applied by the Agent only upon successful Update/Download operation. Therefore, Set will enter the values to the Temporary Configuration of the agent, while Get will get the values of the Active Configuration.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtBertPrtIdx
This attribute indicates a unique number to identify a port.
The valid port number depends on the IO slot no., the installed card type and the port type: outside/external, inside/internal. In the Kilo… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.1.5.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtBertPattern
This object indicates the pattern of the BERT.
p2Exxm1 = 2Exx-1. pxx = pattern xx. This object is the same for all configurations. notApplicable - when this object is not supported. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.1.5.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtBertInjectRate
This object indicates the error rate injection of the BERT.
r10Emx = 10E-x This object is the same for all configurations. single - single error injection. notApplicable - when this object is not supported. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.1.5.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtBertInjectErrRateCmd
This object controls activation/deactivation of the Error
Rate Injection during BERT. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.1.5.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtBertInjectSingleErrCmd
This object enables to initiate a Single Error Injection
during BERT (on). Upon completion, the value will automatically change to off(2). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.1.5.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtBertRunTime
This object indicates how much time (seconds) passed since
BERT started to run. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.1.5.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtBertESs
How many Errored Seconds were detected since BERT started
to run. Counter for Kmux and MP. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.1.5.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtBertSyncLoss
How many times Sync Loss was detected since BERT started
to run. For some products: number of seconds in which Sync Loss occured since BERT started to run. See product specification. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.1.5.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtBertErrorBits
How many Error Bits were detected since BERT started
to run. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.1.5.1.9 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtBertClearCounters
Setting this object to ON, will enforce a clear
operation of some BERT Counters. Upon completion, the value will automatically change to off(2). |
Enumerationr/w Constraints: range: 0-4 |
.1.3.6.1.4.1.164.3.3.3.1.5.1.10 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtBertSyncStatus
Sync Status while BERT runs.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.1.5.1.11 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtBertTs
This object indicates on which TSs of the selected port, BERT
should be applied. Each Bit of the Octet represents a TS: 31 ......0 MSB LSB Bit 0 will not be used. If the bit value is '1' - BERT shou… |
OctetStringr/w Constraints: range: 0-4 |
.1.3.6.1.4.1.164.3.3.3.1.5.1.12 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtBertResult
This object indicates Result of BERT
for the selected port (number of error bits divided to the total number of data bits.) Applicable only if BERT is running on this port Agents that do not support this… |
OctetString Constraints: range: 0-4 |
.1.3.6.1.4.1.164.3.3.3.1.5.1.13 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtBertTxBits
How many data bits were transmitted since BERT started
to run, or since last counter clear (prtBertClearCounters set to on). |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.1.5.1.14 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtBertRxBits
How many data bits were Received since BERT started
to run, or since last counter clear (prtBertClearCounters set to on). |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.1.5.1.15 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtBertTxErrorBits
Number of injected error bits since BERT started
to run, or since last counter clear (prtBertClearCounters set to on). |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.1.5.1.16 |
prtMonTable
table.1.3.6.1.4.1.164.3.3.3.1.6
·
1 row entry
·
6 columns
For DXC, the write operation into the Table's Objects is valid only for the TmpCnfg entry (Scratch).
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtMonCnfgIdx
This object indicates the Idx of the Cnfg(1..255) being
accessed. Idx of 255 relates to the TmpCnfg. For products that do not support configurations, 1 will be always used. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.1.6.1.1 |
||||||||||||||
|
prtMonitoringIdx
This object indicates the Monitoring Port Index.
For DXC: The valid port number depends on the IO slot no., the installed card type and the port type: external, internal. * The external ports will according to the con… |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.1.6.1.2 |
||||||||||||||
|
prtMonitoringEnable
This object indicates if the prtMonitoringIdx is configured as
a monitoring port or not. disabled = the port is NOT configured to monitor. Setting this object to this value will cause reset (to 0) of the… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.1.6.1.3 |
||||||||||||||
|
prtMonitoringTSs
This object indicates which TSs of the Monitoring port,
the test equipment should monitor. Each Bit of the Octet represents a TS: 31 ......0 MSB LSB Bit 0 will not be used. If the bit value is '1' -… |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.1.6.1.4 |
||||||||||||||
|
prtMonitoredPort
This object indicates the MONITORED Port Index that the Monitoring
port monitors. For DXC: The valid port number depends on the IO slot no., the installed card type and the port type: external, internal. * T… |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.1.6.1.5 |
||||||||||||||
|
prtMonitoredTSs
This object indicates which TSs of the Monitored port, should be monitored.
Each Bit of the Octet represents a TS: 31 ......0 MSB LSB Bit 0 will not be used. If the bit value is '1' - this TS should … |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.1.6.1.6 |
prtCfgParamTable
table.1.3.6.1.4.1.164.3.3.3.1.7.1
·
1 row entry
·
10 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry. KMUX parameters are for the cards: KMBE/New, KVF.6 family.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
prtCfgParamCnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.1.7.1.1.1 |
||||||
|
prtCfgParamIdx
A unique identifier of the port (within the card when applicable).
- For KM-2100: Slot*100+Ch external ports: Ch=1..10 internal ports (sub-channels): Ch=11..20. - For FCD-T1/E1(L): MAIN=111, SUB=113, CH1=122, CH2=… |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.1.7.1.1.2 |
||||||
|
prtCfgParamSlt
This attribute indicates a unique number to identify the slot where
the card is inserted in. In the 2104 Unit the entries kmxIO5(111)..kmxIO12(118) are not valid. notApplicable(255) - for products that do not have Slots. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.1.7.1.1.3 |
||||||
|
prtCfgParamOperatedMl
The main link for this channel.
The field is relevant only for ML modes of Dual, Priority Bumping and Switched Backup. |
Enumerationr/w | .1.3.6.1.4.1.164.3.3.3.1.7.1.1.4 |
||||||
|
prtCfgParamMlAtoMlBPrio
ML-A to ML-B Priority.
The field is relevant only for ML modes of Priority Bumping and Switched Backup. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.1.7.1.1.5 |
||||||
|
prtCfgParamMlBtoMlAPrio
ML-B to ML-A Priority.
The field is relevant only for ML modes of Priority Bumping. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.1.7.1.1.6 |
||||||
|
prtCfgParamInbandLoopDetection
Inband Loop Detection.
The field is relevant for FCD-T1/E1(L) ports. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.1.7.1.1.7 |
||||||
|
prtCfgParamInbandLoopPatternCfg
This object indicates if Inband Loop polynomial pattern
will be according to RDL Loop (the standard) or User Configurated according to prtCfgParamInbandLoopActPattern and prtCfgParamInbandLoopDeactPattern. |
Enumerationr/w | .1.3.6.1.4.1.164.3.3.3.1.7.1.1.8 |
||||||
|
prtCfgParamInbandLoopActPattern
This object is a binary string of up to 8 bits.
Though the syntax allows for any ASCII characters, for this object only '0' or '1' characters are valid. The string determines coefficients of the polynomial pattern sent … |
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.3.3.1.7.1.1.9 |
||||||
|
prtCfgParamInbandLoopDeactPattern
This object is a binary string of up to 8 bits.
Though the syntax allows for any ASCII characters, for this object only '0' or '1' characters are valid. The string determines coefficients of the polynomial pattern sent … |
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.3.3.1.7.1.1.10 |
prtT1E1StatTable
table.1.3.6.1.4.1.164.3.3.3.2.1
·
1 row entry
·
5 columns
T1/E1 port statistics table.
An entry in the T1/E1 port statistics table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
prtT1E1SPrtIdx
This attribute indicates a unique port number.
The same numbering as for prtGenPrtIdx. The valid port number depends on the IO slot no., the installed card type and the port type: outside, inside. * The outside port… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.2.1.1.1 |
|
prtT1E1SSlt
This attribute indicates a unique number to identify the slot where
the card is inserted in. When the unit is stand-alone, this object is not applicable and 255 will be used. |
Enumeration | .1.3.6.1.4.1.164.3.3.3.2.1.1.2 |
|
prtT1E1OosCount
This object is applicable only for an E1 active port.
It provides the number of red alarm events since the last count clearing. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.3.3.2.1.1.3 |
|
prtT1E1BpvLastMin
This object is applicable only for an E1 active port.
It provides the number of BPV (BiPolar Violation) events detected during the last minute. |
SNMPv2-SMIGauge32 Constraints: range: 1-255Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.3.3.2.1.1.4 |
|
prtT1E1BpvMax
This object is applicable only for an E1 active port.
It provides the maximal number of BPV (BiPolar Violation) events (per minute), detected during the worst minute. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.3.3.2.1.1.5 |
prtT1E1CnfgTable
table.1.3.6.1.4.1.164.3.3.3.2.2
·
1 row entry
·
34 columns
T1/E1 port configuration table.
An entry in the T1/E1 port configuration table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtT1E1CnfgIdx
This attribute indicates the Idx of the Config being accessed.
Idx of 255 relates to the Temporary (Scratch) Config. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.2.2.1.1 |
||||||||||||||||||||||||||||||||
|
prtT1E1PrtIdx
This attribute indicates a unique port number.
The same numbering as for prtGenPrtIdx. The valid port number depends on the IO slot no., the installed card type and the port type: outside, inside. In the DX… |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.2.2.1.2 |
||||||||||||||||||||||||||||||||
|
prtT1E1Slt
This attribute indicates a unique number to identify the slot where
the card is inserted in. When the unit is stand-alone, this object is not applicable and 255 will be used. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.2.2.1.3 |
||||||||||||||||||||||||||||||||
|
prtT1E1LineType
This variable indicates the variety of T1/E1
Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can reasonably carry, as well as the interpretation of th… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.2.2.1.4 |
||||||||||||||||||||||||||||||||
|
prtT1E1LineCode
This variable describes the variety of Zero
Code Suppression used on the link, which in turn affects a number of its characteristics. jbzs=b7zs refers the Jammed Bit Zero Suppres- sion, in whi… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.2.2.1.5 |
||||||||||||||||||||||||||||||||
|
prtT1E1SignalMode
'none' indicates that no bits are reserved for
signaling on this channel. 'robbedBit' indicates that T1 Robbed Bit Signaling is in use. 'bitOriented' indicates that E1 Channel Associated … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.2.2.1.6 |
||||||||||||||||||||||||||||||||
|
prtT1E1Fdl
This bitmap describes the use of the facili-
ties data link, and is the sum of the capabili- ties: 'other' indicates that a protocol other than one following is used. 'ansi-T1-403' ref… |
Enumerationr/w | .1.3.6.1.4.1.164.3.3.3.2.2.1.7 |
||||||||||||||||||||||||||||||||
|
prtT1E1FdlMode
Fdl Mode of the T1 selected port.
notApplicable - will be used for an E1 port. |
Enumerationr/w | .1.3.6.1.4.1.164.3.3.3.2.2.1.8 |
||||||||||||||||||||||||||||||||
|
prtT1E1Sync
This object enables returning to normal operation, after
the end of a main/sub link red alarm event, in reduced time. 'tr62411' - complies with AT&T TR-62411 (after 10 seconds). Applicable for both T1 and E… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.2.2.1.9 |
||||||||||||||||||||||||||||||||
|
prtT1E1CGA
This object selects the method used to signal the CGA state
to the other end, through the main/sub link. 'none' - non-transparent mode. When one of the links (main/sub) will be in Out Of Service state, both… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.2.2.1.10 |
||||||||||||||||||||||||||||||||
|
prtT1E1IdleCode
This object selects the code transmitted to fill idle
(unused) time slots in the main link frame. Valid range: (0 - FF HEX) . |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.2.2.1.11 |
||||||||||||||||||||||||||||||||
|
prtT1E1OosSignal
'idle' = '0' = on-hook, idle state
'busy' = '1' = off-hook, busy state 'forcedIdle' = SP = both A and B signaling bits are forced to '0' during out-of-service periods. 'forcedBusy' = MK = both A and B sig… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.2.2.1.12 |
||||||||||||||||||||||||||||||||
|
prtT1E1VoiceOos
Voice Out-Of-Service code. Valid range: (0 - FF HEX).
For agents that do not support this feature, the value will always be 0. |
OctetStringr/w | .1.3.6.1.4.1.164.3.3.3.2.2.1.13 |
||||||||||||||||||||||||||||||||
|
prtT1E1DataOos
Data Out-Of-Service code. Valid range: (0 - FF HEX).
For agents that do not support this feature, the value will always be 0. |
OctetStringr/w | .1.3.6.1.4.1.164.3.3.3.2.2.1.14 |
||||||||||||||||||||||||||||||||
|
prtT1E1LineLengthMask
This attribute is the line length mask parameter used only
for T1/DSU interfaces. len400p533ft=length range: 400ft to 533ft 'fcc68' - provides compliance with the FCC 68.308 Option A output pulse mask. |
Enumerationr/w | .1.3.6.1.4.1.164.3.3.3.2.2.1.15 |
||||||||||||||||||||||||||||||||
|
prtT1E1TxGainMask
This attribute is the tx gain mask parameter (dB), used
only for T1/CSU interfaces. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.2.2.1.16 |
||||||||||||||||||||||||||||||||
|
prtT1E1InbandMng
A unique number to identify an Inband management over the
link. internal - supported by KM-2100 only. It means that the management is internal to the frame. It takes part of the ML Frame bits (instead of dat… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.2.2.1.17 |
||||||||||||||||||||||||||||||||
|
prtT1E1InbandMngRate
A unique number to identify the rate of the Inband management.
It is required only for E1 links and is applicable only when prtExT1E1InbandMng selected is FdlOrTs0 or dedicatedTs. |
Enumerationr/w | .1.3.6.1.4.1.164.3.3.3.2.2.1.18 |
||||||||||||||||||||||||||||||||
|
prtT1E1DedicatedTs
The value is differently determined for different products.
There are two methods: 1) A unique number to identify Dedicated TS of the T1/E1 port. It is applicable only when prtExT1E1InbandMng selected … |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.2.2.1.19 |
||||||||||||||||||||||||||||||||
|
prtT1E1InbandMngRoutProt
Inband Mng Routing Protocol of the port.
When prtT1E1InbandMng is 'dedicatedPpp'-'proprietary' and 'rip2' are applicable. For other values - only 'proprietary' is applicable. … |
Enumerationr/w | .1.3.6.1.4.1.164.3.3.3.2.2.1.20 |
||||||||||||||||||||||||||||||||
|
prtT1E1LinkMode
regular - TSs are connected by user via TS Assignment only
transparent - when a port with this Link Mode is connected to an internal T1/E1 port of a T3/E3 card, TS0, TS16 and Fbit are transp… |
Enumerationr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.3.3.2.2.1.21 |
||||||||||||||||||||||||||||||||
|
prtT1E1Multiplier
The data rate of each TS. The multiplier values
can be 56 kbps or 64 kbps. For T1 only. |
Enumerationr/w | .1.3.6.1.4.1.164.3.3.3.2.2.1.22 |
||||||||||||||||||||||||||||||||
|
prtT1E1RxGain
This attribute is the rx volume (dB).
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.2.2.1.23 |
||||||||||||||||||||||||||||||||
|
prtT1E1RAI
Remote Alarm Signal
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.2.2.1.24 |
||||||||||||||||||||||||||||||||
|
prtT1E1LineMode
Interface type of the port.
For T1 - csu, dsu are the valid values For E1 - dsu, ltu are the valid values |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.2.2.1.25 |
||||||||||||||||||||||||||||||||
|
prtT1E1TS0SaBits
This object is applicable only for E1 ports. For T1, string size will be 0.
For E1, it enables user to select the use of TS0 Sa Bits 4..8, by 3 octets: The order (in hexa display): free Sa-Bit-4 Sa-Bit-5 Sa-Bit-6 … |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.2.2.1.26 |
||||||||||||||||||||||||||||||||
|
prtT1E1ConnectedTS
This parameter indicates if there is any connected TS for this interface.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.2.2.1.27 |
||||||||||||||||||||||||||||||||
|
prtT1E1Ts0SaBit
This parameter indicates whether to send TS 0, or not.
noMng= TS 0 is looped, therefore not sent. mng= TS 0 isn't looped, therefore it is sent. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.2.2.1.28 |
||||||||||||||||||||||||||||||||
|
prtT1E1SameFeCnfg
This parameter indicates whether the same E1 configuration
parameters and TS assignment are set both to the local and remote device. Read-Write access is applicable only in G732N framed mode. For G732S and UNFRAMED thi… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.2.2.1.29 |
||||||||||||||||||||||||||||||||
|
prtT1E1RemCrc4
This object indicates whether the E1 of the Remote device
connected to this E1 port, will have CRC-4 or not. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.2.2.1.30 |
||||||||||||||||||||||||||||||||
|
prtT1E1MaxTSs
This object is applicable only for DXC D4T1, D4E1, D8T1, D8E1
external ports and D8GSL internal E1 ports. It is relevant only when sysCIntTsAllocMode=static(2). 255=not applicable If prtT1E1LineType=unframed(8), th… |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.2.2.1.31 |
||||||||||||||||||||||||||||||||
|
prtT1E1EocTsConfig
This object indicates whether the use of EOC for TS Configuration
is enabled or not. |
Enumerationr/w Constraints: range: 0-8 |
.1.3.6.1.4.1.164.3.3.3.2.2.1.32 |
||||||||||||||||||||||||||||||||
|
prtT1E1Role
This object indicates whether this port behaves as SUB or Main link.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.2.2.1.33 |
||||||||||||||||||||||||||||||||
|
prtT1E1PppEchoFailDetection
This object indicates whether the PPP Echo is taken into account
for its Fail Detection. This object is relevant when Inband Mng between devices is Dedicated TS PPP. Default=Disable. Enable - will be selected main… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.2.2.1.34 |
prtT1E1FdlMsgTable
table.1.3.6.1.4.1.164.3.3.3.2.3
·
1 row entry
·
4 columns
This table is applicable for a T1 interface with 'esf' LineType or E1 interface, when CRC is enabled (LineType).
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
prtT1E1FdlMsgPrtIdx
This attribute indicates a unique port number.
The same numbering as for prtGenPrtIdx. The valid port number depends on the IO slot no., the installed card type and the port type: outside, inside. * The outs… |
SNMPv2-SMIInteger32 Constraints: range: 0-20Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.2.3.1.1 |
||||||||
|
prtT1E1FdlMsgFdlType
The Fdl type reference of the Fdl message.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.2.3.1.2 |
||||||||
|
prtT1E1FdlMsgSlt
This attribute indicates a unique number to identify the slot where
the card is inserted in. When the unit is stand-alone, this object is not applicable and 255 will be used. |
Enumeration Constraints: range: 20-20 |
.1.3.6.1.4.1.164.3.3.3.2.3.1.3 |
||||||||
|
prtT1E1FdlMsg
FDL message.
|
OctetString Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.2.3.1.4 |
prtHSParamTable
table.1.3.6.1.4.1.164.3.3.3.3.1
·
1 row entry
·
16 columns
A table.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
prtHSCnfgIdx
This attribute indicates the Idx of the Config being accessed.
Idx of 255 relates to the Temporary (Scratch) Config. |
Integer32 | .1.3.6.1.4.1.164.3.3.3.3.1.1.1 |
||||||||
|
prtHSPrtIdx
This attribute indicates a unique number to identify a port.
The valid port number depends on the IO slot no., the installed card type and the port type: outside, inside, SP. * The inside ports will be the HS cards … |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.3.1.1.2 |
||||||||
|
prtHSSlt
This attribute indicates a unique number to identify the slot where
the card is inserted in. When the unit is stand-alone, this object is not applicable and 255 will be used. |
Enumeration Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.3.3.3.1.1.3 |
||||||||
|
prtHSRate
This object indicates the port rate (speed).
auto - rate is selected automatically by system. |
Enumerationr/w | .1.3.6.1.4.1.164.3.3.3.3.1.1.4 |
||||||||
|
prtHSFifoSize
This object selects the size of the user data channel buffer
FIFO used in the DTE2 mode. In the other modes, buffer size is automatically set by the DACS agent. Buffer FIFO size in bits, corresponds to FIFO lengths of… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.3.1.1.5 |
||||||||
|
prtHSClkMode
Clock Mode of the user data channel.
dce - DACS operates as a DCE and provides transmit and receive clocks to the synchronous user DTE. dte1- DACS supplies the receive clock to the user equipment and acce… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.3.1.1.6 |
||||||||
|
prtHSCTS
Selection of CTS line state in the user data channel.
on - CTS continuously ON. rts - CTS line follows the RTS line. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.3.1.1.7 |
||||||||
|
prtHSRtsState
RTS state of the port.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.3.1.1.8 |
||||||||
|
prtHSInbandLoopback
This object indicates if Inband Loopback from the Network
should be enabled or disabled. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.3.1.1.9 |
||||||||
|
prtHSInbandLoopPatternCfg
This object indicates if Inband Loop polynomial pattern
will be according to RDL Loop (the standard) or User Configurated according to prtHSActivatePolyPattern and prtHSDeactivatePolyPattern. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.3.1.1.10 |
||||||||
|
prtHSInbandLoopActPattern
This object is a binary string of up to 8 bits.
Though the syntax allows for any ASCII characters, for this object only '0' or '1' characters are valid. The string determines coefficients of the polynomial pattern sent … |
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.3.3.3.1.1.11 |
||||||||
|
prtHSInbandLoopDeactPattern
This object is a binary string of up to 8 bits.
Though the syntax allows for any ASCII characters, for this object only '0' or '1' characters are valid. The string determines coefficients of the polynomial pattern sent … |
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.3.3.3.1.1.12 |
||||||||
|
prtHSDCD
Selection of DCD line state in the user data channel.
linkOK - DCD line is ON only when active link is OK. on - DCD continuously ON. |
Enumerationr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.3.3.3.1.1.13 |
||||||||
|
prtHSClkPolarity
This object indicates the clock polarity.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.3.3.3.1.1.14 |
||||||||
|
prtHSInterfaceType
This object indicates the selected electrical interface type.
|
Enumerationr/w Constraints: range: 1-8 |
.1.3.6.1.4.1.164.3.3.3.3.1.1.15 |
||||||||
|
prtHSUnframed
Unframed line for HS ports.
yes - means that all TSs must be transferred, including TS0. In this case, prtHSRate must be r31x56eq1736Kbps OR r31x64eq1984Kbps. |
Enumerationr/w | .1.3.6.1.4.1.164.3.3.3.3.1.1.16 |
prtHSBertTable
table.1.3.6.1.4.1.164.3.3.3.3.2
·
1 row entry
·
4 columns
A table.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtHSBertPrtIdx
This attribute indicates a unique number to identify a port.
The valid port number depends on the IO slot no., the installed card type and the port type: outside, inside, SP. * The inside ports will be the HS cards … |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.3.2.1.1 |
||||||||||
|
prtHSBertSlt
This attribute indicates a unique number to identify the slot where
the card is inserted in. When the unit is stand-alone, this object is not applicable and 255 will be used. |
Enumeration Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.3.3.3.2.1.2 |
||||||||||
|
prtHSBertCountClr
Setting this object (to on) initiate bert counter clear
operation. Valid only when bert test is active on the specific port. (Every time a new bert test starts, the counter is automatically cleared; this command enabl… |
Enumerationr/w | .1.3.6.1.4.1.164.3.3.3.3.2.1.3 |
||||||||||
|
prtHSBertTestResult
This object indicates the number of Bit Error Rate indicated
during the BERT test. Active only when bert test is running on the selected port. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.3.2.1.4 |
prtSpCnfgTable
table.1.3.6.1.4.1.164.3.3.3.4.1
·
1 row entry
·
22 columns
A table.
All the entries at this table are identical(have the same value)
at all the configurations(1..255) except at the TmpCnfg.
- For products supporting more than one configuration, the write operation
into the Table Obje…
at all the configurations(1..255) except at the TmpCnfg.
- For products supporting more than one configuration, the write operation
into the Table Obje…
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtSpCnfgIdx
This attribute indicates the Idx of the Cnfg(1..255) being
accessed. Idx of 255 relates to the TmpCnfg. |
Integer32 | .1.3.6.1.4.1.164.3.3.3.4.1.1.1 |
||||||||||||||||||||||||||||||||||||
|
prtSpPrtIdx
This attribute indicates a unique port number of the SPor DP port.
For DXC, it is the port in the active DCL card: - SP = 1 - NP ; DP = 2 For Kilomux, the port index is calculated as follows: 1… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.4.1.1.2 |
||||||||||||||||||||||||||||||||||||
|
prtSpUsage
This attribute indicates what is the usage of the port.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.4.1.1.3 |
||||||||||||||||||||||||||||||||||||
|
prtSpRate
This attribute indicates the operation rate (speed) of the port.
auto - automatic rate selection, by the agent. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.4.1.1.4 |
||||||||||||||||||||||||||||||||||||
|
prtSpDataBits
This attribute indicates the number of data bits in async
frame |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.4.1.1.5 |
||||||||||||||||||||||||||||||||||||
|
prtSpParity
This attribute indicates the parity mode in async frame
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.4.1.1.6 |
||||||||||||||||||||||||||||||||||||
|
prtSpCallOutMode
This attribute indicates the call-out mode.
For DXC - this object is applicable only for the DP port (2). |
Enumerationr/w Constraints: range: 0-255 |
.1.3.6.1.4.1.164.3.3.3.4.1.1.7 |
||||||||||||||||||||||||||||||||||||
|
prtSpInterface
This attribute indicates the supervisory port interface.
dce - the DACS appears as a DCE for the port. dte - the DACS operates as a DTE, for connection via modem, for the port. |
Enumerationr/w Constraints: range: 0-255 |
.1.3.6.1.4.1.164.3.3.3.4.1.1.8 |
||||||||||||||||||||||||||||||||||||
|
prtSpCTS
CTS line state. This object is applicable only for
port (1) = SP |
Enumerationr/w | .1.3.6.1.4.1.164.3.3.3.4.1.1.9 |
||||||||||||||||||||||||||||||||||||
|
prtSpDcdDelay
DCD delay in msec.
d10 = delay of 10msec. This object is applicable only for port (1) = SP |
Enumerationr/w | .1.3.6.1.4.1.164.3.3.3.4.1.1.10 |
||||||||||||||||||||||||||||||||||||
|
prtSpDsr
DSR line state. This object is applicable only for
port (1) = SP |
Enumerationr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.3.3.4.1.1.11 |
||||||||||||||||||||||||||||||||||||
|
prtSpNoOfRetries
For DXC - this object is applicable only for port (2) = DP.
The number of dialing retries requested. Default = 0 |
Integer32r/w | .1.3.6.1.4.1.164.3.3.3.4.1.1.12 |
||||||||||||||||||||||||||||||||||||
|
prtSpWaitForConnect
For DXC - this object is applicable only for port (2) = DP.
Waiting time for connect, in seconds. Default = 30 sec. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.4.1.1.13 |
||||||||||||||||||||||||||||||||||||
|
prtSpDialMode
For DXC - this object is applicable only for port (2) = DP.
Dialing mode. Default=tone |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.4.1.1.14 |
||||||||||||||||||||||||||||||||||||
|
prtSpAltNumMode
For DXC - this object is applicable only for port (2) = DP.
It determines wether to use the alternate number or not. Default = no. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.4.1.1.15 |
||||||||||||||||||||||||||||||||||||
|
prtSpPrimaryNum
For DXC - this object is applicable only for port (2) = DP.
It is the Primary dialing number. |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.4.1.1.16 |
||||||||||||||||||||||||||||||||||||
|
prtSpAltNum
For DXC - this object is applicable only for port (2) = DP.
It is the Alternate dialing number. This number is applicable only if prtSpAltNumMode is 'yes'. |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.4.1.1.17 |
||||||||||||||||||||||||||||||||||||
|
prtSpRoutProtocol
This attribute indicates the routing protocol of the port.
notApplicable - for DP. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.4.1.1.18 |
||||||||||||||||||||||||||||||||||||
|
prtSpCmd
SP Command.
For LRS this parameter will be used for a Modem Command. Upon NMS's Get operation for devices that this parameter is notApplicable, agent will send NULL string. |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.4.1.1.19 |
||||||||||||||||||||||||||||||||||||
|
prtSpActCallOut
This object indicates when to Activate Call-Out.
It is used by FCD-T1/E1. always - to activate call-out always. linkFail - to activate call-out only when Link of Inband Management fails. |
Enumerationr/w | .1.3.6.1.4.1.164.3.3.3.4.1.1.20 |
||||||||||||||||||||||||||||||||||||
|
prtSpAlrRelayMode
This attribute indicates the Alarm Relay Mode.
notApplicable - for DP. |
Enumerationr/w | .1.3.6.1.4.1.164.3.3.3.4.1.1.21 |
||||||||||||||||||||||||||||||||||||
|
prtSpStopBits
This attribute indicates number of stop bits in an async frame.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.3.3.4.1.1.22 |
prtDimCnfgTable
table.1.3.6.1.4.1.164.3.3.3.5.1
·
1 row entry
·
8 columns
A table.
The write operation into the Table Objects is valid only
for the TmpCnfg entry (prtDimCnfgIdx=255).
for the TmpCnfg entry (prtDimCnfgIdx=255).
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtDimCnfgIdx
This attribute indicates the Idx of the Cnfg(1..255) being
accessed. Idx of 255 relates to the TmpCnfg. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.5.1.1.1 |
||||||||||||||||||||||||||||||||||||||||
|
prtDimIdx
This attribute indicates a unique port number of the
DIM card. The convention used for DXC: (IO slot number+10)*10 + 1 Example: port1 of IO slot 11 will be: 211 . |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.5.1.1.2 |
||||||||||||||||||||||||||||||||||||||||
|
prtDimTxMode
Tx mode.
regularTx - the links are connected to a similar outfit on the other side. In this mode, if a link fails, the transmitted bandwidth is decreased accordingly. broadcast - t… |
Enumerationr/w | .1.3.6.1.4.1.164.3.3.3.5.1.1.3 |
||||||||||||||||||||||||||||||||||||||||
|
prtDimPolarity
Polarity.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.3.3.5.1.1.4 |
||||||||||||||||||||||||||||||||||||||||
|
prtDimClkMode
Clock Mode.
smooth - a clock that is not 'pulsed'(has no 'gaps'). In this mode the DXC does NOT receive back the clock signal. extSmooth - same as 'smooth' but in this mode, the DXC receives back t… |
Enumerationr/w | .1.3.6.1.4.1.164.3.3.3.5.1.1.5 |
||||||||||||||||||||||||||||||||||||||||
|
prtDimMaxDelay
Max Delay permitted between the links, in msec.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.3.3.5.1.1.6 |
||||||||||||||||||||||||||||||||||||||||
|
prtDimMng
Use of DIM port for management.
disabled - no management on DIM ts1 - 1 bit of TS1 is used for management. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.5.1.1.7 |
||||||||||||||||||||||||||||||||||||||||
|
prtDimMngRoutProt
Mng Routing Protocol of the port.
none - when prtDimMng is 'disabled'. |
Enumerationr/w | .1.3.6.1.4.1.164.3.3.3.5.1.1.8 |
prtDimDestTable
table.1.3.6.1.4.1.164.3.3.3.5.2
·
1 row entry
·
5 columns
A table.
The write operation is valid only for the TmpCnfg entry
(prtDimDestCnfgIdx=255).
(prtDimDestCnfgIdx=255).
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtDestCnfgIdx
This attribute indicates the Idx of the Cnfg(1..255) being
accessed. Idx of 255 relates to the TmpCnfg. |
Integer32 | .1.3.6.1.4.1.164.3.3.3.5.2.1.1 |
||||||||||
|
prtDestDimIdx
This attribute indicates a unique port number of the
DIM card. The convention used for DXC: (IO slot number+10) & 1 Example: port1 of IO slot 11 will be: 211 . |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.5.2.1.2 |
||||||||||
|
prtDestIdx
This attribute indicates a destination number of the
DIM card. |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.164.3.3.3.5.2.1.3 |
||||||||||
|
prtDest
Destination port,(of a T1/E1 port), that is connected to the
DIM card, for the specified Destination number. 0 = No destination port. Else: For external ports: (IO Slot+10) & 1 for port 1 (IO Slot+10) & 3 for p… |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.5.2.1.4 |
||||||||||
|
prtDestConnect
Connection Status of the specified destination number.
For a specified destination port, it depends both on the status of the port and on the status of the far-end port. Since this is a RO object, same value will be re… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.5.2.1.5 |
prtICnfgTable
table.1.3.6.1.4.1.164.3.3.3.6.1
·
1 row entry
·
4 columns
A table.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtICnfgIdx
This attribute indicates the Idx of the Config being accessed.
Idx of 255 relates to the Temporary (Scratch) Config. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.6.1.1.1 |
||||||||||||||||||||||
|
prtIIdx
This attribute indicates a unique number to identify a port.
The valid port number depends on the IO slot no., the installed card type and the port type: outside, inside, SP. * The ISDN B1, B2, D channels will be in… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.6.1.1.2 |
||||||||||||||||||||||
|
prtIRate
This object indicates the port rate in bits.
Each TS contains 8 bits. Thus, 1 bit is equivalent to 8Kbps rate. |
Enumerationr/w | .1.3.6.1.4.1.164.3.3.3.6.1.1.3 |
||||||||||||||||||||||
|
prtIConnect
D channel connection.
no - disconnected yes - connected. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.6.1.1.4 |
prtHdslTable
table.1.3.6.1.4.1.164.3.3.3.7.1
·
1 row entry
·
7 columns
HDSL port table.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
prtHdslIdx
This attribute indicates a unique number to identify a port.
The valid port number depends on the IO slot no., the installed card type and the port type: outside, inside. * The HDSL ports will be external. For port … |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.7.1.1.1 |
||||||||
|
prtHdslMode
This object indicates the HDSL mode.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.7.1.1.2 |
||||||||
|
prtHdslRptrType
The Repeater between Near and Far modem.
none - no repeater exists between the modems hrpt - HRPT repeater exists between the modems. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.7.1.1.3 |
||||||||
|
prtHdslMaxRate
Maximum Rate of the xDSL Line, in Kbps units.
This object can be Set only for a Central unit. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.7.1.1.4 |
||||||||
|
prtHdslLinkType
The Link Type.
msdsl2w - MSDSL 2 Wire hdsl2w - HDSL 2 Wire hdsl4w - HDSL 4 Wire gDsl - G.DSL |
Enumeration Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.3.3.7.1.1.5 |
||||||||
|
prtHdslCompSwVer
This object indicates the Software Version of the
component (Piggyback card) supporting this interface. |
OctetString Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.7.1.1.6 |
||||||||
|
prtHdslCompHwVer
This object indicates the Hardware Version of the
component (Piggyback card) supporting this interface. |
OctetString Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.7.1.1.7 |
prtT3E3CnfgTable
table.1.3.6.1.4.1.164.3.3.3.8.1
·
1 row entry
·
9 columns
T3/E3 port configuration table.
An entry in the T3/E3 port configuration table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
prtT3E3CnfgIdx
This attribute indicates the Idx of the Config being accessed.
Idx of 255 relates to the Temporary (Scratch) Config. For DXC, write operations can be performed only on the Temp Config. For products that do not support c… |
Integer32 | .1.3.6.1.4.1.164.3.3.3.8.1.1.1 |
||||||
|
prtT3E3PrtIdx
This attribute indicates a unique port number.
For DXC: The same numbering as for prtGenPrtIdx. The valid port number depends on the IO slot no., the installed card type and the port type: outside, inside. * The ext… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.3.8.1.1.2 |
||||||
|
prtT3E3Slt
This attribute indicates a unique number to identify the slot where
the card is inserted in. When the unit is stand-alone, this object is not applicable and 255 will be used. |
Enumeration | .1.3.6.1.4.1.164.3.3.3.8.1.1.3 |
||||||
|
prtT3E3LineLength
This object is the length of the ds3 line in feet.
It provides information for line build out circuitry if it exists and can use this object to adjust the line build out. len0p450ft = 0 - 450 feet len451p900ft =… |
Enumerationr/w Constraints: range: 10-10 |
.1.3.6.1.4.1.164.3.3.3.8.1.1.4 |
||||||
|
prtT3E3InbandMng
A unique number to identify the Frame Type over the link.
For Optimux-T3: only values (4), (7) are supported. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.8.1.1.5 |
||||||
|
prtT3E3AisFrame
This object is applicable only for Optimux-T3.
It allows user to select whether the AIS sent will be framed or unframed. |
Enumerationr/w Constraints: range: 10-10 |
.1.3.6.1.4.1.164.3.3.3.8.1.1.6 |
||||||
|
prtT3E3TxClockSource
Tx Clock Source.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.3.8.1.1.7 |
||||||
|
prtT3E3RoutProt
Routing Protocol of the port.
This object is applicable only for T3 ports. |
Enumerationr/w | .1.3.6.1.4.1.164.3.3.3.8.1.1.8 |
||||||
|
prtT3E3AisTransmit
Indicates if AIS signal will be transmitted over the tributary E3/DS3
upon failure. |
Enumerationr/w | .1.3.6.1.4.1.164.3.3.3.8.1.1.9 |
cmprTable
table.1.3.6.1.4.1.164.3.3.4.1
·
1 row entry
·
6 columns
A table.
An entry in table.
Indexes
modmSaConfigMode modmSaAlarmBuffIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
cmprTypeIdx
This object indicates the Type of the Compressed
data referred (which table, which level, etc). The type is a code according to a convention between agent and NMS. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.4.1.1.1 |
||||
|
cmprCnfgIdx
This object indicates the configuration number the
Compressed information relates to. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.4.1.1.2 |
||||
|
cmprVersion
This object indicates the version of the internal format of
the Compressed data (the version of the convention used). |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.4.1.1.3 |
||||
|
cmprSltIdx
This attribute indicates a unique number of the slot
position where the card is inserted. When the unit is stand-alone or this object is not applicable, 255 will be used. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.4.1.1.4 |
||||
|
cmprPrtIdx
This object indicates a unique identifier of the port,
the compressed information relates to. For DXC - according to the order in the card of cmprSltIdx: - first two digits will be: (IO slot number+10) - last one/two di… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.4.1.1.5 |
||||
|
cmprObj
This object is the compressed information itself,
according to a predefined format, both agent and NMS agreed about. |
OctetStringr/w | .1.3.6.1.4.1.164.3.3.4.1.1.6 |
mapLinkTable
table.1.3.6.1.4.1.164.3.3.4.2
·
1 row entry
·
4 columns
A table.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
mapLinkIdx
A unique identifier of the link
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.4.2.1.1 |
||||
|
mapLinkSlotIdx
This attribute indicates a unique slot position where
the module is inserted. |
Enumerationr/w | .1.3.6.1.4.1.164.3.3.4.2.1.2 |
||||
|
mapLinkPortIdx
This attribute indicates a unique port number.
The valid port number depends on the IO slot no., the installed card type and the port type: outside, inside, SP. In the DXC : - first two digits will be: (IO slot numb… |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.4.2.1.3 |
||||
|
mapLinkState
This attribute indicates the status of the link between
the two muxes |
Enumeration | .1.3.6.1.4.1.164.3.3.4.2.1.4 |
alrGenTable
table.1.3.6.1.4.1.164.3.3.4.3
·
1 row entry
·
7 columns
A table.
An entry in table.
Indexes
mdlSIdx
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
alrGenCode
This object is a unique code number, identifying
a certain alarm. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.3.4.3.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
alrGenDescription
This entry is a unique text description, of the alarm
corresponding to the specified code. |
OctetString | .1.3.6.1.4.1.164.3.3.4.3.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
alrGenLevel
Alarm level.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.4.3.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
alrGenSlotType
Slot type that the alarm is relevant to.
clAndIo - an alarm that is relevant for both CL and IO slots. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.4.3.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
alrGenSeverity
This object enables the user to select a severity for each alarm.
The severity is set per alarm code (same for all slots/ports using this code). |
Enumerationr/w | .1.3.6.1.4.1.164.3.3.4.3.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
alrGenDebounce
Debounce time for each alarm code, in seconds.
The meaning is, that an alarm will be 'declared' as ON (or OFF), only after it was actually ON/OFF the Debouncing time selected by user. 0 = default debounce selection (ea… |
Integer32r/w | .1.3.6.1.4.1.164.3.3.4.3.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
alrGenDefSeverity
This object reports the default severity of each alarm.
User can change the severity of the alarms defined by this default via the alrGenSeverity object. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.3.4.3.1.7 |
modmSaConfigTable
table.1.3.6.1.4.1.164.3.4.1.1.1
·
1 row entry
·
12 columns
Configuration parameters of the Central and Remote Modems. The table will be RW for a Central agent and RO for a Remote agent.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
modmSaConfigMode
The mode indicates if the configuration parameters refer
the Central or the Remote Modem. For AMC 102 the remote means regenerator. There can be some regenerators connecting one by the other. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.1.1.1.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmSaConfigLoopback
The possible loopbacks. It is not possible to have a
remPortLoop(4) in both, Central and Remote units simultaneously. |
Enumerationr/w | .1.3.6.1.4.1.164.3.4.1.1.1.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmSaConfigAlrClearOnCmd
Setting this attribute to on, clears all the events,
both from the active alarms list and from the alarms buffer. Upon completion, the value will automatically change to off(2). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.1.1.1.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmSaConfigAlrClearAllCmd
Setting this attribute to on, clears all the alarms of the
alarm buffer and active alarms list. Upon completion, the value will automatically change to off(2). |
Enumerationr/w | .1.3.6.1.4.1.164.3.4.1.1.1.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmSaConfigTestClearCmd
Setting this attribute to on, clears all the user-initiated
tests and loopbacks. The variable modmSaConfigLoopback should automatically change to noLoopback. Upon completion, the value will automatically change to off(… |
Enumerationr/w | .1.3.6.1.4.1.164.3.4.1.1.1.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmSaConfigClkMaster
Modem configured as Central:
External - Locked to the clock signal provided by the user's equipment by user's port. Internal - Internal oscillator. Station - Station clock (is relevant only for c… |
Enumerationr/w | .1.3.6.1.4.1.164.3.4.1.1.1.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmSaConfigResetStatistics
In the on state all statistics counters (including E1
counters) are zeroed. Upon completion, the value will automatically change to off(2). Modems that do not support statistics - the value will always be off (this … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.1.1.1.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmSaConfigActiveTs
This object will be RO for the Remote modem.
This is the number of active HDSL Time Slots, that determines user's data rate. Valid values: 1..maximum supported by the specific modem. 255 = notApplicable. |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.1.1.1.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmSaConfigReset
Reset of modem.
hw - HW Reset. The configured values will not change. hwAndConfig - HW Reset and initializing the default values. notApplicable - for modems with no Reset support. After 'hw' or 'hwAndConfig' is Set, age… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.1.1.1.1.9 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmSaConfigRemote
This parameter enables or disables automatic configuration
of the remote moden in Proxy mode. |
Enumerationr/w | .1.3.6.1.4.1.164.3.4.1.1.1.1.10 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmSaConfigPsType
The type of PS.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.1.1.1.1.11 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmSaConfigWorkMode
The work mode indicates if devices work in transparent mode or termination mode.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.1.1.1.1.12 |
modmSaStatTable
table.1.3.6.1.4.1.164.3.4.1.1.2
·
1 row entry
·
7 columns
Status of the Central and Remote Modems.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
modmSaStatHwTest
The variable contains the results of the last hardware test.
It is a sum of 2**n where n is as follows: 0 - EPROM Failure (or Database chksum error) 1 - I/O Expander Error 2 - Counter Error 3 - HDSL Framer Failure 4 - … |
SNMPv2-SMIInteger32 Constraints: range: 2-2Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.4.1.1.2.1.1 |
||||||
|
modmSaStatAlarms
The variable contains the status of the Alarms in the alarm
buffer. For bit location of each Alarm in the OctetString see Modem's specification. If the value is 0 then there are No 'On' Alarms in the alarm buffer. |
OctetString | .1.3.6.1.4.1.164.3.4.1.1.2.1.2 |
||||||
|
modmSaStatClkSrc
This entry indicates the source of the modem clock.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.1.1.2.1.3 |
||||||
|
modmSaStatAlarmsMask
This variable uses to mask alarms.
Location of each Alarm Mask in the OctetString, is identical to the Alarm OctetString. If the value is 0 then none of the alarms is masked. |
OctetStringr/w | .1.3.6.1.4.1.164.3.4.1.1.2.1.4 |
||||||
|
modmSaStatDeviceType
This entry indicates the device type (or utility).
|
Enumeration | .1.3.6.1.4.1.164.3.4.1.1.2.1.5 |
||||||
|
modmSaStatSwVersion
Display String of the modem SW version.
Format: W. X Y Z 0..9 0..99 A,B,E 0..99 (Z+P are optional.) A=alpha, B=beta, E=end of development. Examples: 2.23A8 3.4 |
SNMPv2-TCDisplayString Enumerated Values:
Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.4.1.1.2.1.6 |
||||||
|
modmSaStatHwVersion
Display String of the modem HW version.
|
SNMPv2-TCDisplayString Enumerated Values:
Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.4.1.1.2.1.7 |
modmSaAlarmBuffTable
table.1.3.6.1.4.1.164.3.4.1.1.3
·
1 row entry
·
4 columns
The alarm buffer of the Central and Remote Modems.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
modmSaAlarmBuffIndex
The index of the alarm buffer Table.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.4.1.1.3.1.1 |
||||||
|
modmSaAlarmBuffCode
The code of the alarm. For text description of each Alarm
code see Modem's specification. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.4.1.1.3.1.2 |
||||||
|
modmSaAlarmBuffTime
The time stamp at which the alarm has occurred. The format
is hh:mm:ss |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.4.1.1.3.1.3 |
||||||
|
modmSaAlarmBuffState
The new status of the alarm.
|
Enumeration | .1.3.6.1.4.1.164.3.4.1.1.3.1.4 |
modmSaRptrTable
table.1.3.6.1.4.1.164.3.4.1.1.5
·
1 row entry
·
6 columns
The Repeaters parameters known to the central modem.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
modmSaIndex
A unique number to identify the modem that reports about the repeater.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.4.1.1.5.1.1 |
||||||
|
modmSaRptrIndex
The index of the Repeater.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.4.1.1.5.1.2 |
||||||
|
modmSaRptrTest
The possible loopbacks.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.4.1.1.5.1.3 |
||||||
|
modmSaRptrActiveAlarms
Status of the Alarms. Each bit represents a specific
alarm . For bit location of each alarm in the Octet String see modem's specification. If the value is 0 then there are No Alarms. |
OctetString | .1.3.6.1.4.1.164.3.4.1.1.5.1.4 |
||||||
|
modmSaRptrAlrClear
Setting this attribute to on, clears all the active (On)
alarms of the repeater. Upon completion, the value will automatically change to off(2).. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.1.1.5.1.5 |
||||||
|
modmSaRptrVersion
SW/HW version of the repeater
|
SNMPv2-TCDisplayString Enumerated Values:
Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.4.1.1.5.1.6 |
mdlParamTable
table.1.3.6.1.4.1.164.3.4.2.1.1
·
1 row entry
·
12 columns
Parameters table of cards in the Hub.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
mdlSIdx
A unique number to identify a slot position in the modems
Hub. |
Enumeration | .1.3.6.1.4.1.164.3.4.2.1.1.1.1 |
||||
|
mdlSNoOfModems
Number of modems on this card.
255 = notApplicable. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.4.2.1.1.1.2 |
||||
|
mdlCardType
Card's type.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.2.1.1.1.3 |
||||
|
mdlSPanelType
LRS-12 Card connectors' panel type.
fx - IMOD panels psxxx - PS panels fxCm2 - CM-2 panels. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.2.1.1.1.4 |
||||
|
mdlSLed
LEDs status on the card . Each led will be represented by 4
bits where the first 2 bits (left) will specify the Status : (00=NA, 01=OFF, 10=ON, 11=BLINK), and the next two bits (right) will specify the Color : (00=GRE… |
OctetString | .1.3.6.1.4.1.164.3.4.2.1.1.1.5 |
||||
|
mdlSActiveAlarms
This object is applicable only for PS and CL cards.
It gives the status of the Alarms for each Slot. Each bit represents an alarm in the slot. For bit location of each Alarm in the Octet String see Hub's specification… |
OctetString | .1.3.6.1.4.1.164.3.4.2.1.1.1.6 |
||||
|
mdlAlrClear
Setting this attribute to on, clears all the active (On)
alarms of the Slot. Upon completion, the value will automatically change to off(2). |
Enumerationr/w | .1.3.6.1.4.1.164.3.4.2.1.1.1.7 |
||||
|
mdlSConfigMismatch
This object is applicable only for slots containing
IMOD cards. ON - when CM-2 realizes that the configuration of the Near-End modem1 is different from that of its Far-End modem. In this case it expec… |
Enumeration | .1.3.6.1.4.1.164.3.4.2.1.1.1.8 |
||||
|
mdlConfigSource
This object is applicable only for slots containing
IMOD cards, when mdlSConfigMismatch=on/on1/on2. nearEnd - Near End - 1 modem has the correct configuration farEnd - Far End - 1 has the correct configuration near… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.2.1.1.1.9 |
||||
|
mdlConfigGround
Enables to connect or disconnect an IMOD card to the
ground. disconnect - not connected to ground. connect - connected to ground. notApplicable - for other cards. |
Enumeration | .1.3.6.1.4.1.164.3.4.2.1.1.1.10 |
||||
|
mdlCapabilities
Indicates the optional capabilities that are implemented by this module
and are manageable through this MIB. For each capability 1 BIT is allocated in each Octet starting from the LSB. If the value of the BIT = 1, … |
OctetString | .1.3.6.1.4.1.164.3.4.2.1.1.1.11 |
||||
|
mdlClockSource
The Clock Source of the Card.
Applicable for ASMi-52 modems only. internal - means that the card uses its own Internal Clock external - means that the card uses the Clock received from an External DTE port … |
Enumerationr/w | .1.3.6.1.4.1.164.3.4.2.1.1.1.12 |
modemParamTable
table.1.3.6.1.4.1.164.3.4.3.1.1
·
1 row entry
·
36 columns
This parameters table is applicable mainly for modems that are not agents.
An entry in table.
Indexes
modemIdx
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
modemIdx
For LRS:
A unique number to identify a modem in the Hub or its far-end modem. For DXC: This will be the ifIndex of the External Port of D8SL card, that works with this modem/product. For MP: This will be the ifIndex of… |
SNMPv2-SMIInteger32 Constraints: range: 0-899Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.4.3.1.1.1.1 |
||||||||||||||||
|
modemType
Modem type.
xxxxxx - Stand-Alone modem. xxxxxxc - Modem on a Card within a Hub having an Agent. xxxxxxr - Modem on a Card within a Hub having no Agent. xxxxxxcd - Modem on a Double-Modem Card within a Hub … |
Enumeration Constraints: range: 0-96 |
.1.3.6.1.4.1.164.3.4.3.1.1.1.2 |
||||||||||||||||
|
modemConfigMode
The mode identifies if the Modem operates as the Master
unit or as the Slave unit. For modems having a jumper for this function, this object will be RO. This object can be Set only to the Master unit when mo… |
Enumerationr/w | .1.3.6.1.4.1.164.3.4.3.1.1.1.3 |
||||||||||||||||
|
modemModeTemporary
This object specifies if the Modem operates as
modemConfigMode value (Master/Slave) temporarily or permanently. This object can be Set only when: - modemConfigMode=master AND modemModeTemporary=no - modemC… |
Enumerationr/w | .1.3.6.1.4.1.164.3.4.3.1.1.1.4 |
||||||||||||||||
|
modemNoOfDte
Number of DTE ports in the modem.
|
SNMPv2-SMIInteger32 Constraints: range: 1-96Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.4.3.1.1.1.5 |
||||||||||||||||
|
modemWire
Modem wiring.
|
Enumerationr/w Constraints: range: 0-101 |
.1.3.6.1.4.1.164.3.4.3.1.1.1.6 |
||||||||||||||||
|
modemMngLink
Communication status between the pair of modems.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.3.1.1.1.7 |
||||||||||||||||
|
modemReset
When this object is set to the value of hwReset(3),
the module performs HW Reset. When this object is set to the value of configReset(4), the modem performs Configuration Reset, which will set the modem to the las… |
Enumerationr/w Constraints: range: 0-101 |
.1.3.6.1.4.1.164.3.4.3.1.1.1.8 |
||||||||||||||||
|
modemSlot
A unique number to identify the slot position of the
modem (card)in its Hub. notApplicable - for a stand-alone modem or Rack 214 card. io13..io15 - are for DXC use in case of a Far-Unit that is D8SL ca… |
Enumeration Constraints: range: 0-101 |
.1.3.6.1.4.1.164.3.4.3.1.1.1.9 |
||||||||||||||||
|
modemHubId
4 Hex characters, identifying the Hub. The last two
characters (least significant) will be displayed on the Hub's CL card by a 7 segment display. This object is applicable only for LRS-12 modems. |
OctetString Constraints: range: 0-101 |
.1.3.6.1.4.1.164.3.4.3.1.1.1.10 |
||||||||||||||||
|
modemIpAddress
For LRS:
The IP address of the LRS-12 agent . If the modem is NOT an LRS-12 card, the variable will be 0.0.0.0. For DXC and MP: the IP Address of the Far-End unit. |
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.3.4.3.1.1.1.11 |
||||||||||||||||
|
modemPsType
The type of PS, for a stand-alone modem.
notApplicable - for LRS-12 or Rack 214 card. |
Enumeration Constraints: range: 0-1 |
.1.3.6.1.4.1.164.3.4.3.1.1.1.12 |
||||||||||||||||
|
modemMaskTraps
The value determines the modem traps the agent should mask
and not send to the management console. The value is a sum of 2**n, where n is a bit assigned to a certain trap. For bit assignment see modem's specification… |
SNMPv2-SMIInteger32r/w Constraints: range: 0-1Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.4.3.1.1.1.13 |
||||||||||||||||
|
modemActiveAlarms
Status of the Alarms for each modem. Each bit represents an
alarm. For bit location of each Alarm in the Octet String see modem's specification. A bit is '1' if the alarm is On. If the value is 0 then there are no… |
OctetString | .1.3.6.1.4.1.164.3.4.3.1.1.1.14 |
||||||||||||||||
|
modemAlrClear
Setting this attribute to on, clears all the active (On)
alarms of the modem. Upon completion, the value will automatically change to off(2). |
Enumerationr/w | .1.3.6.1.4.1.164.3.4.3.1.1.1.15 |
||||||||||||||||
|
modemAlrBufClear
Setting this attribute to on, clears all the alarms in the
buffer alarm of the modem. Upon completion, the value will automatically change to off(2). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.3.1.1.1.16 |
||||||||||||||||
|
modemMaskSignaling
Mask of Signals per modem. When a signal is masked,
the agent will not send the modemSignalingChange TRAP, upon change of this signal's value and it will not enter the History Log. Each bit represents a signal of t… |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.3.1.1.1.17 |
||||||||||||||||
|
modemPanelType
The panel type of the modem.
This parameter is applicable only for Far-End modems that are stand-alone or cards of another LRS-12. It enables displaying the correct panel of the modem. - Stand-alone : applicable only … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.3.1.1.1.18 |
||||||||||||||||
|
modemIType
Is the modem Intelligent (ASMi-xx) ; or not - (ASM-xx).
This object is used only for the Far-End modem (with the relevant modemIdx). notApplicable - for ASMi-32, ASMi-50 no - modem is NOT I-Type so it doesn't have a m… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.3.1.1.1.19 |
||||||||||||||||
|
modemRcvPower
The Rx Level of the modem, in dBm.
Valid values: -99 .. 0. 255=not applicable. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.4.3.1.1.1.20 |
||||||||||||||||
|
modemSwVersion
SW version of the modem, multiplied by 100.
Example: 115 means SW ver: 1.15 0 = notApplicable. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.4.3.1.1.1.21 |
||||||||||||||||
|
modemLed
LEDs status on the card . Each led will be represented by 4
bits where the first 2 bits (left) will specify the Status : (00=NA, 01=OFF, 10=ON, 11=BLINK), and the next two bits (right) will specify the Color : (00=GRE… |
OctetString Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.3.1.1.1.22 |
||||||||||||||||
|
modemRemoteType
Remote modem card type. Not applicable to near - end modems.
For LRS-52, sa(3)=saMaster. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.3.1.1.1.23 |
||||||||||||||||
|
modemConfigPhantom
Enables to supply electric power to remote devices (SA modem,
repeaters), through the current module. off - remote devices will not get PS through the current modem. on - remote devices will get PS through the curren… |
Enumerationr/w | .1.3.6.1.4.1.164.3.4.3.1.1.1.24 |
||||||||||||||||
|
modemRemoteTestEnable
This parameter identifies if the remote Modem allowed to operates
tests. For Near-End modems this parameter will be ON. |
Enumerationr/w | .1.3.6.1.4.1.164.3.4.3.1.1.1.25 |
||||||||||||||||
|
modemSwVerString
Display String of the modem SW version.
Format: X. Y Z P 0..9 0..99 A,B,E 0..99 (Z+P are optional.) A=alpha, B=beta, E=end of development. Examples: 2.23A8 3.4 |
SNMPv2-TCDisplayString Constraints: range: 4-4Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.4.3.1.1.1.26 |
||||||||||||||||
|
modemRemoteIdx
0 = notApplicable.
For LRS: The Remote modem index. Applicable only for modemRemoteType=double(5) or quad(7). For DXC, LRS-52 and MP: - if Remote unit is an LRS Quad card: remote modem index (1..4) - if Remote… |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.4.3.1.1.1.27 |
||||||||||||||||
|
modemHwVerString
Display String of the modem HW version.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.4.3.1.1.1.28 |
||||||||||||||||
|
modemResetStatistics
In the on state all statistics counters (including E1
counters) are zeroed. Upon completion, the value will automatically change to off(2). notApplicable - for modems with no statistics support. |
Enumerationr/w | .1.3.6.1.4.1.164.3.4.3.1.1.1.29 |
||||||||||||||||
|
modemMaxRate
Maximum rate supported by the modem
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.3.1.1.1.30 |
||||||||||||||||
|
modemBoxMaterial
Shape (picture) of modem box is related to box material.
Applicable for ASMi52 SA |
Enumeration | .1.3.6.1.4.1.164.3.4.3.1.1.1.31 |
||||||||||||||||
|
modemLowSpeed
This parameter enables working at low rates,
when working with a serial interface (V.35,X.21) modem opposite to a E1/T1 interface modem. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.3.1.1.1.32 |
||||||||||||||||
|
modemDevicePorts
The value indicates the existence of optional ports (which are not Line or DTE).
The value is a sum of 2**n, where n is a bit assigned to a certain port. For bit assignment see modem's specification. For ASMi-52 S… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.4.3.1.1.1.33 |
||||||||||||||||
|
modemUserName
This object allows the user to configure a name
for the selected modem. |
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.4.3.1.1.1.34 |
||||||||||||||||
|
modemRowValidity
This parameter defines whether this row is valid or not.
It is an optional parameter. |
Enumerationr/w Constraints: range: 0-899 |
.1.3.6.1.4.1.164.3.4.3.1.1.1.35 |
||||||||||||||||
|
modemTftpCmd
This parameter defines the TFTP Command.
After performing the command, the Agent will automatically set this variable to noOp(1). |
Enumerationr/w | .1.3.6.1.4.1.164.3.4.3.1.1.1.36 |
modemAlrBufTable
table.1.3.6.1.4.1.164.3.4.3.2.1
·
1 row entry
·
6 columns
This parameters table is applicable only for modems that are not agents.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
modemAlrBufIdx
Running index of the alarm buffer table.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.4.3.2.1.1.1 |
|
modemAlrBufCode
The code of the alarm. For text description of each Alarm
code see Modem's specification. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.4.3.2.1.1.2 |
|
modemAlrBufState
The new status of the alarm.
|
Enumeration | .1.3.6.1.4.1.164.3.4.3.2.1.1.3 |
|
modemAlrBufDate
The Date at which the alarm has occurred. The format
is according to the entered systemDate format. |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.4.3.2.1.1.4 |
|
modemAlrBufTime
The time stamp at which the alarm has occurred. The format
is hh:mm:ss |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.4.3.2.1.1.5 |
|
modemAlrBufSysUpTime
The value of sysUpTime at the time the alarm has occurred.
This object is applicable only for products that cannot support calendar date (modemAlrBufDate) and time (modemAlrBufTime) When not applicable, this object con… |
RFC1155-SMITimeTicks Constraints: range: 1-96Textual Convention: RFC1155-SMITimeTicks Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.4.3.2.1.1.6 |
modemGeneralTable
table.1.3.6.1.4.1.164.3.4.3.3.1
·
1 row entry
·
2 columns
The IMOD General data Table. The data is specific to each modem.
An entry in the modemGeneralTable. This entry is per modem.
Each modem has a specific index, which identifies it.
Each modem has a specific index, which identifies it.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
modemCurrentElapsedTime
The number of seconds that have elapsed since the beginning
of the current error-measurement period. |
Integer32 | .1.3.6.1.4.1.164.3.4.3.3.1.1.1 |
|
modemValidIntervals
The number of previous intervals for which data was
collected. The value will be 96 unless the interface was brought on-line within the last 24 hours, in which case the value will be the number of complete 15 minute … |
Integer32 | .1.3.6.1.4.1.164.3.4.3.3.1.1.2 |
modemIntervalTable
table.1.3.6.1.4.1.164.3.4.3.3.2
·
1 row entry
·
9 columns
The IMOD Interval Table. The data is specific to each modem.
An entry in the modemIntervalTable. This entry is per modem
and per interval selected.
and per interval selected.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
modemIntervalNumber
The number between 1 and 96, where 1 is the most recently
completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid). Maximum valid number is m… |
Integer32 Constraints: range: 0-100 |
.1.3.6.1.4.1.164.3.4.3.3.2.1.1 |
|
modemSyncLoss
Percent of interval, SyncLoss signal is ON.
101 = notApplicable/unknown. |
Integer32 | .1.3.6.1.4.1.164.3.4.3.3.2.1.2 |
|
modemLineQuality
Quality of Line for the selected modem, in the selected valid
interval. |
Enumeration | .1.3.6.1.4.1.164.3.4.3.3.2.1.3 |
|
modemLineUtility
Percent of interval, Line is utilized.
101 = notApplicable/unknown. |
Integer32 | .1.3.6.1.4.1.164.3.4.3.3.2.1.4 |
|
modemRTS
Percent of interval, RTS signal is ON.
101 = notApplicable/unknown. |
Integer32 Constraints: range: 0-96 |
.1.3.6.1.4.1.164.3.4.3.3.2.1.5 |
|
modemCD
Percent of interval, CD signal is ON.
101 = notApplicable/unknown. |
Integer32 | .1.3.6.1.4.1.164.3.4.3.3.2.1.6 |
|
modemBertResult
Result of BERT for the selected modem, in the selected
valid interval. |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.4.3.3.2.1.7 |
|
modemBpvError
BPV Error.
The Octet will be built as follows: MSB 7 6 5 4 3 2 1 0 LSB |__| |______________| y=0..3 x=0..63 BPV Error = x * (10**y) An Agent that d… |
OctetString | .1.3.6.1.4.1.164.3.4.3.3.2.1.8 |
|
modemFoError
FO Error.
The Octet will be built as follows: MSB 7 6 5 4 3 2 1 0 LSB |__| |______________| y=0..3 x=0..63 FO Error = x * (10**y) An Agent that doe… |
OctetString | .1.3.6.1.4.1.164.3.4.3.3.2.1.9 |
modmPrtSpTable
table.1.3.6.1.4.1.164.3.4.4.1.1
·
1 row entry
·
8 columns
Configuration parameters of the Local or Remote Modem Supervisory Ports. The port will be identified by its specific ifIndex value.
An entry in table.
Indexes
modmPrtHdslIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
modmPrtSpUsage
This attribute indicates what is the usage of the port.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.4.4.1.1.1.1 |
||||||||||||||
|
modmPrtSpRate
This attribute indicates the operation rate (speed) of the
port. auto - automatic rate selection, by the agent. |
Enumerationr/w Constraints: range: 0-255 |
.1.3.6.1.4.1.164.3.4.4.1.1.1.2 |
||||||||||||||
|
modmPrtSpDataBits
This attribute indicates the number of data bits in the
word format. |
Enumerationr/w Constraints: range: 4-4 |
.1.3.6.1.4.1.164.3.4.4.1.1.1.3 |
||||||||||||||
|
modmPrtSpParity
This attribute indicates the parity mode in async frame
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.4.1.1.1.4 |
||||||||||||||
|
modmPrtSpInterface
This attribute indicates the supervisory port interface.
dce - the modem appears as a DCE for the SP port. dte - the modem operates as a DTE, for connection via modem, for the SP port. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.4.1.1.1.5 |
||||||||||||||
|
modmPrtSpCTS
CTS line state.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.4.1.1.1.6 |
||||||||||||||
|
modmPrtSpDcdDelay
DCD delay in msec.
d10 = delay of 10msec. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.4.1.1.1.7 |
||||||||||||||
|
modmPrtSpDsr
DSR line state.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.4.4.1.1.1.8 |
modmPrtDs1Table
table.1.3.6.1.4.1.164.3.4.4.2.1
·
1 row entry
·
7 columns
Statistics parameters of the Local and Remote modem Ds1 ports. The port will be identified by its specific ifIndex value.
An entry in table.
Indexes
modmPrtDteIndex
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
modmPrtDs1HdslPriorityBumping
deprecated
The 4 bytes represent the 32 time slots of the E1 frame.
Each bit can be set to one, making the corresponding time slot a HIGH priority. Bits 16 and 32 cannot be modified by the user. The maximum number of HIGH priority… |
OctetStringr/w | .1.3.6.1.4.1.164.3.4.4.2.1.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtDs1Sync
The standard used for the time required for the E1 port to return
to normal operation after local loss of synchronization. Default: itu(2). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.4.2.1.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtDs1BpvLastMin
This object is applicable only for an E1 active port.
It provides the number of BPV (BiPolar Violation) events detected during the last minute. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.4.4.2.1.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtDs1BpvMax
This object is applicable only for an E1 active port.
It provides the maximal number of BPV (BiPolar Violation) events (per minute), detected during the worst minute. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.4.4.2.1.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtDs1LineLength
This attribute is the line length mask parameter used only
for T1/DSU interfaces. len400p533ft=length range: 400ft to 533ft 'fcc68' - provides compliance with the FCC 68.308 Option A output pulse mask. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.4.2.1.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtDs1CRCAvgError
Counts the average number of CRC error events per second.
The average is updated every second |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.4.4.2.1.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtDs1DtsToRemote
This attribute indicates whether DTS (Dedicated TS)
is transmitted to remote unit. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.4.2.1.1.7 |
modmPrtHdslCurrentTable
table.1.3.6.1.4.1.164.3.4.4.3.1
·
1 row entry
·
7 columns
The HDSL Current Table. The data collected is for the current 15-minute interval.
An entry in the HDSL Current Table. This entry is per HDSL
interface (LOOP1 or LOOP2). Each modem (Central/Remote) has
a specific ifIndex value for the port, which identifies it.
For FDSL it is used for any xDSL interf…
interface (LOOP1 or LOOP2). Each modem (Central/Remote) has
a specific ifIndex value for the port, which identifies it.
For FDSL it is used for any xDSL interf…
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
modmPrtHdslCurrentElapsedTime
The number of seconds that have elapsed since the beginning
of the current error-measurement period. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.4.3.1.1.1 |
||||||||||||||||||||||||||
|
modmPrtHdslCurrentESs
The number of Errored Seconds encountered by an HDSL
interface in the current 15 minute interval. An Errored Second is any second containing one or more Errored Blocks or an occurrence of an SDP. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.4.4.3.1.1.2 |
||||||||||||||||||||||||||
|
modmPrtHdslCurrentSESs
The number of Severely Errored Seconds encountered by an HDSL
interface in the current 15 minute interval. An SES is any second containing more than 30% Errored Blocks (50 blocks) or one or more SDPs. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.4.4.3.1.1.3 |
||||||||||||||||||||||||||
|
modmPrtHdslCurrentBBEs
The number of Background Block Errors encountered by an HDSL
interface in the current 15 minute interval. A BBE is an errored block not occurring as part of an SES. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.4.4.3.1.1.4 |
||||||||||||||||||||||||||
|
modmPrtHdslCurrentUASs
The number of Unavailable Seconds encountered by an HDSL
interface in the current 15 minute interval. A UAS is any second in which a failed signal state exists. A failure state is declared when 10 consecutive SESs oc… |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.4.4.3.1.1.5 |
||||||||||||||||||||||||||
|
modmPrtHdslCurrentNoiseMargin
The current noise margin in DB.
This object is not an accumulative one, therefore it's value will appear only in this table. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.4.4.3.1.1.6 |
||||||||||||||||||||||||||
|
modmPrtHdslCurrentAttenuation
The current attenuation in DB.
This object is not an accumulative one, therefore it's value will appear only in this table. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.4.4.3.1.1.7 |
modmPrtHdslIntervalTable
table.1.3.6.1.4.1.164.3.4.4.3.2
·
1 row entry
·
9 columns
The HDSL Interval Table. The data collected is for the last 96 completed 15-minute intervals.
An entry in the HDSL Interval Table. This entry is per an HDSL
interface (LOOP1 or LOOP2) and per 15 minute interval. The
port and unit (Central/Remote) is identified by its specific
ifIndex value.
For FDSL it is use…
interface (LOOP1 or LOOP2) and per 15 minute interval. The
port and unit (Central/Remote) is identified by its specific
ifIndex value.
For FDSL it is use…
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
modmPrtHdslIntervalNumber
The number between 1 and 96, where 1 is the most recently completed
15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid). |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.4.3.2.1.1 |
||||||||||||||||||||||||||
|
modmPrtHdslIntervalESs
The number of Errored Seconds encountered by an HDSL interface in
one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.4.4.3.2.1.2 |
||||||||||||||||||||||||||
|
modmPrtHdslIntervalSESs
The number of Severely Errored Seconds encountered by an HDSL interface in
one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.4.4.3.2.1.3 |
||||||||||||||||||||||||||
|
modmPrtHdslIntervalBBEs
The number of Background Block Errors encountered by an HDSL interface in
one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.4.4.3.2.1.4 |
||||||||||||||||||||||||||
|
modmPrtHdslIntervalUASs
The number of Unavailable Seconds encountered by an HDSL interface in
one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.4.4.3.2.1.5 |
||||||||||||||||||||||||||
|
modmPrtHdslIntervalESR
The ratio of ESs to 900 seconds, encountered by an HDSL interface in
one of the previous 96, individual 15 minute, intervals. |
Integer32 | .1.3.6.1.4.1.164.3.4.4.3.2.1.6 |
||||||||||||||||||||||||||
|
modmPrtHdslIntervalSESR
The ratio of SESs to 900 seconds, encountered by an HDSL interface in
one of the previous 96, individual 15 minute, intervals. |
Integer32 | .1.3.6.1.4.1.164.3.4.4.3.2.1.7 |
||||||||||||||||||||||||||
|
modmPrtHdslIntervalBBER
The ratio of BBEs to 900 seconds, encountered by an HDSL interface in
one of the previous 96, individual 15 minute, intervals. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.4.3.2.1.8 |
||||||||||||||||||||||||||
|
modmPrtHdslIntervalValidData
This variable indicates if the data for this interval is valid.
|
SNMPv2-TCTruthValue Enumerated Values:
Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.164.3.4.4.3.2.1.9 |
modmPrtHdslTotalTable
table.1.3.6.1.4.1.164.3.4.4.3.3
·
1 row entry
·
5 columns
The HDSL Total Table. The data collected is the cumulative sum of the various statistics for the 24 hour period preceding the current interval.
An entry in the HDSL Total Table. This entry is per an HDSL
interface (LOOP1 or LOOP2). The port and unit (Central/Remote)
is identified by its specific ifIndex value.
For FDSL it is used for any xDSL interface.
interface (LOOP1 or LOOP2). The port and unit (Central/Remote)
is identified by its specific ifIndex value.
For FDSL it is used for any xDSL interface.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
modmPrtHdslTotalValidIntervals
The number of previous intervals for which valid data was
collected. The value will be 96 unless the interface was brought on-line within the last 24 hours, in which case the value will be the number of complete 15 m… |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.4.3.3.1.1 |
||||||||||||||
|
modmPrtHdslTotalESs
The number of Errored Seconds encountered by an HDSL
interface in the previous 24 hour interval. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.4.4.3.3.1.2 |
||||||||||||||
|
modmPrtHdslTotalSESs
The number of Severely Errored Seconds encountered by an HDSL
interface in the previous 24 hour interval. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.4.4.3.3.1.3 |
||||||||||||||
|
modmPrtHdslTotalBBEs
The number of Background Block Errors encountered by an HDSL
interface in the previous 24 hour interval. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.4.4.3.3.1.4 |
||||||||||||||
|
modmPrtHdslTotalUASs
The number of Unavailable Seconds encountered by an HDSL
interface in the previous 24 hour interval. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.4.4.3.3.1.5 |
modmPrtHdslTable
table.1.3.6.1.4.1.164.3.4.4.3.4
·
1 row entry
·
8 columns
The HDSL Table.
An entry in the HDSL Table. The port and unit (Central/Remote)
is identified by its specific modmPrtHdslIndex value.
is identified by its specific modmPrtHdslIndex value.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
modmPrtHdslIndex
The HDSL port index. In some cases it can equal ifIndex.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.4.4.3.4.1.1 |
||||||||||||||
|
modmPrtHdslDedicatedTs
The HDSL Current Dedicated TS.
Valid values: 0..31. 255 = None (no dedicated TS). |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.4.3.4.1.2 |
||||||||||||||
|
modmPrtHdslPriorityBumping
The 4 bytes represent time slots 0..31 of the E1 frame.
Each bit can be set to '1', making the corresponding time slot a HIGH priority. Bit 0 is always HIGH (cannot be modified by the user). The maximum number of HIGH p… |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.4.3.4.1.3 |
||||||||||||||
|
modmPrtHdslMngProtocol
A unique number to identify an Inband management over the
link. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.4.3.4.1.4 |
||||||||||||||
|
modmPrtHdslRoutProtocol
Inband Mng Routing Protocol of the port.
When modmPrtHdslMngProtocol is 'dedicatedPpp'-'proprietary' and 'rip2' are applicable. For other values - only 'proprietary' is applicabl… |
Enumerationr/w | .1.3.6.1.4.1.164.3.4.4.3.4.1.5 |
||||||||||||||
|
modmPrtHdslInbandMngRate
A unique number to identify the rate of the Inband management.
It is applicable only when modmPrtHdslDedicatedTs <> (255 Or 0). |
Enumerationr/w | .1.3.6.1.4.1.164.3.4.4.3.4.1.6 |
||||||||||||||
|
modmPrtHdslPriorityBumpingEnable
This attribute indicates the Priority Bumping Mode.
It is relevant only for 4W interfaces. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.4.3.4.1.7 |
||||||||||||||
|
modmPrtHdslPriorityBumpingTimeout
This attribute indicates the Priority Bumping Timeout in minutes.
It is relevant only for 4W interfaces (2 lines of 2W each). Upon failure of one of the 2W lines, Timeout is the time period that the agent should wait un… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.4.4.3.4.1.8 |
modmPrtDteTable
table.1.3.6.1.4.1.164.3.4.4.4.1
·
1 row entry
·
22 columns
Configuration parameters of the Master and Slave Modem DTE Ports. The port and unit (Master/Slave) is identified by its specific modmPrtDteIndex value.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
modmPrtDteIndex
The DTE port index.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.4.4.4.1.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtDteProtocol
The DTE port Protocol.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.4.4.4.1.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtDteDataBits
The DTE number of data bits.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.4.4.1.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtDteStopBits
The DTE minimum number of stop bits in the tx async frame.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.4.4.1.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtDteRate
The DTE port rate.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.4.4.1.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtDteCtsDelay
CTS/RTS delay, in msec.
dxx = xx msec. notApplicable - for ASMi-31, ASMi-32. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.4.4.1.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtDteParity
This attribute indicates the parity mode in async frame.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.4.4.1.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtDteIfType
The interface type of the DTE port.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.4.4.1.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtDteRlbEnable
Enable/Disable Remote Loop-Back on this modem, externally
initiated. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.4.4.1.1.9 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtDteAlbEnable
Enable/Disable Analog Loop-Back on this modem, externally
initiated. |
Enumerationr/w | .1.3.6.1.4.1.164.3.4.4.4.1.1.10 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtDteRtsDcdEnable
Enable/Disable RTS-DCD.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.4.4.1.1.11 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtDteDsrDtrEnable
Enable/Disable DSR-DTR.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.4.4.1.1.12 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtDteSignaling
Each bit represents a specific signal state.
1 - means : signal is ON , Enabled, Yes (exists) 0 - means : signal is OFF, Disabled, No . For detailed bit assignment see product's spec. |
OctetString Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.4.4.1.1.13 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtDteLoops
Loops that can be run on the DTE port.
none - no loop (stop running loop) ana - Local Analog Line loop rem - Remote Analog Line loop anaAndBert - ana & BERT together remAndBert - rem & BERT together bert … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.4.4.1.1.14 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtDteTests
This is a mask which indicates
- for Get: which tests are running on the DTE port. - for Set: tests the user wishes to start or stop. Each test has its specific bit. - '1' means the test runs (Set: should run). - '0' … |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.4.4.4.1.1.15 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtDteClearAllTests
Setting this attribute to on, clears all the running loops
and tests of the DTE port. Upon completion, the value will automatically change to off(2). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.4.4.1.1.16 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtDteBertResult
Result of BERT for the selected DTE port.
Applicable only if BERT is running on the DTE port. |
SNMPv2-TCDisplayString Enumerated Values:
Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.4.4.4.1.1.17 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtDteErrCorrect
notApplicable - for modems that do not support this object
on - will start a random error correction process. onBurst - will start a burst error correction process. Setting this object to 'off', will stop any k… |
Enumerationr/w | .1.3.6.1.4.1.164.3.4.4.4.1.1.18 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtDteV54DigitalTest
Enables to start a remote digital loopback upon recognition of a special pattern.
disable - will not start a digital loopback when a special pattern is recognized. enable - will start a loopback upon recognition of a … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.4.4.1.1.19 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtDteV54DigitalTestStatus
Indicates whether a remote digital test was triggered by a pattern
by the remote modem or not. no - the digital test wasn't triggered by a pattern by the remote modem. yes - the digital test was triggered by a pattern … |
Enumeration | .1.3.6.1.4.1.164.3.4.4.4.1.1.20 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtDteTestTimeOut
Indicates the timeout for LLB test.
0=Forever |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.4.4.4.1.1.21 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtDteAlarmForwarding
This MIB object defines whether to enable or disable Alarm Forwarding for this port.
It means whether this port will be affected by the failure of its respective Line port. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.4.4.1.1.22 |
modmPrtLineTable
table.1.3.6.1.4.1.164.3.4.4.5.1
·
1 row entry
·
16 columns
Configuration parameters of the Master and Slave Modem Line Ports. The port and unit (Master/Slave) is identified by its specific modmPrtLineIndex value.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
modmPrtLineIndex
The Line port index.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.4.4.5.1.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtLineClkSrc
The clock source of the Line port.
(5),(6) - applicable only for ASMi-24 and ASMi-50. (7),(8) - System level Clock Source. Applicable to CQ modems. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.4.5.1.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtLineTxLevel
Transmit level in dBm.
pxx = positive xx = +xx nxx = negative xx = -xx |
Enumerationr/w | .1.3.6.1.4.1.164.3.4.4.5.1.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtLineRxLevel
Rx Sensitivity in dBm.
pxx = positive xx = +xx nxx = negative xx = -xx. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.4.5.1.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtLineOutImp
Output impedance in Ohm.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.4.4.5.1.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtLineInImp
Input impedance in Ohm.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.4.4.5.1.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtLineCarrCntrl
Carrier control.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.4.5.1.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtLineRAP
Rate Adapting Protocol.
privateV110Enable (4)= private but enables return to v110. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.4.5.1.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtLineWaveLength
Wave Length of the optical Line.
notApplicable - when the modem Line is not optical. The units are nano-meters [nm]. |
Enumeration | .1.3.6.1.4.1.164.3.4.4.5.1.1.9 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtLineCdSense
Carrier Detect Sense - Detection Sensitivity of Carrier Wave.
high - high sensitivity low - low sensitivity. |
Enumerationr/w | .1.3.6.1.4.1.164.3.4.4.5.1.1.10 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtLineAIS
AIS enable/disable.
notApplicable - for modems that do not support this feature. |
Enumerationr/w | .1.3.6.1.4.1.164.3.4.4.5.1.1.11 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtLineCoding
Line Coding.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.4.4.5.1.1.12 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtLineLength
This attribute is the line length mask parameter used only
for T1/DSU interfaces. len400p533ft=length range: 400ft to 533ft. |
Enumerationr/w | .1.3.6.1.4.1.164.3.4.4.5.1.1.13 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtLineClkSrcPort
Clock Source Port.
This parameter is relevant for external clock source. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.4.4.5.1.1.14 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtLineDteClkConfig
Indicates the clock source of the modems, which were not selected to supply
the external clock. |
Enumerationr/w | .1.3.6.1.4.1.164.3.4.4.5.1.1.15 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
modmPrtLineMaskAlr
This parameter determine whether masking or not the alarms for this line.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.4.4.5.1.1.16 |
optMxConfigTable
table.1.3.6.1.4.1.164.3.5.1
·
1 row entry
·
27 columns
This table contains parameters of configuration for each member of the couple of Optimux.
An entry in the Optimux Config table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
optIndex
optIndex = 1 is for local Optimux.
optIndex = 2 is for remote Optimux. |
Enumeration | .1.3.6.1.4.1.164.3.5.1.1.1 |
||||||||||||||
|
optHWVersion
HW Version of the device.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.5.1.1.2 |
||||||||||||||
|
optSWVersion
SW Version of the device.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.5.1.1.3 |
||||||||||||||
|
optPSPrimary
The status of the primary Power Supply Unit.
|
Enumeration Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.5.1.1.4 |
||||||||||||||
|
optPSSecondary
The status of the secondary Power Supply Unit.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.5.1.1.5 |
||||||||||||||
|
optLinkActive
This object indicates which link is active.
For Optimux-4 it may be: 5, 6 or 105, 106 For FOMi-E3/T3 it may be: 51, 61 or 151, 161. For Optimux-T3 it may be: 51 or 61. For Optimux-155/1 refer to product spec. |
IF-MIBInterfaceIndex Enumerated Values:
Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.164.3.5.1.1.6 |
||||||||||||||
|
optSelectLink
This object is used by Optimuxes.
- For Optimux 4E1/T1 Old Look: This MIB object enables the user to force the device to use specific link. autoredundancy= Main (Link 1) is the default link. When it will fail, the … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.5.1.1.7 |
||||||||||||||
|
optGrpPayLoadLoop
Performs payload loop ( remote loop) to 4 E1 channels
at once. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.5.1.1.8 |
||||||||||||||
|
optGrpClockSource
For Optimux XL:
If dsx3TransmitClockSource = localTiming(2), then the user can configure this field as: localInternal(2) = use the internal clock of the device localExternal(3) = use the external clock connected to the … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.5.1.1.9 |
||||||||||||||
|
optRedundancyStatus
If there are two modules 'links', then this field
should be set to available(2). If there is only one module 'link', this field should be set to notAvailable(3). |
Enumeration | .1.3.6.1.4.1.164.3.5.1.1.10 |
||||||||||||||
|
optRedundancyCnf
This object is used by Optimux-XL, FomiE3/T3, Optimux-T3 and Optimux-155.
For Optimux-XL: If optRedundancyStatus = notAvailable(3), then this field can be off(2) or forcedBU(6). - off(2) = forcedMain: forces the… |
Enumerationr/w | .1.3.6.1.4.1.164.3.5.1.1.11 |
||||||||||||||
|
optFarEndType
Far-End type of product.
This object is especially relevant for the local optimux. notApplicable - for devices that don't have a far-end unit. |
Enumeration | .1.3.6.1.4.1.164.3.5.1.1.12 |
||||||||||||||
|
optServiceChEnable
Service Channel Enable/Disable for each Optimux (local/remote).
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.5.1.1.13 |
||||||||||||||
|
optMaskChAlr
Mask Channel Alarm.
This object is applicable only for Optimux cards. The value of this object is a sum of 2**n, where n is a bit assigned to a certain Channel. Bit='1' means masked. For Optimux-4: Bit0: CH1 ; Bi… |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.5.1.1.14 |
||||||||||||||
|
optAisEnable
AIS enable/disable.
notApplicable - for devices that do not support this feature. |
Enumerationr/w | .1.3.6.1.4.1.164.3.5.1.1.15 |
||||||||||||||
|
optFarMng
This object is used by Optimux-XL and FomiE3/T3.
Is there possibility of Far-End Management (no/yes). This object is applicable only for the Local device. notApplicable - for Remote device and devices that do not suppor… |
Enumerationr/w | .1.3.6.1.4.1.164.3.5.1.1.16 |
||||||||||||||
|
optClockDivision
This object is applicable only for FomiE3/T3 having an HSSI Electrical
interface. It gives the possibility of Clock Division, so that Clock Rate will be less than T3/E3. notApplicable - for a device that does not suppor… |
Enumerationr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.5.1.1.17 |
||||||||||||||
|
optDteLoopEnable
DTE Loop enable/disable (for example loop command requested
by router). This object is applicable only for products having HSSI interface. notApplicable - for devices that do not support this feature. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.5.1.1.18 |
||||||||||||||
|
optGrpClockSourcePrt
This object is applicable for Optimux-T3, when optGrpClockSource=localExternal.
It enables the user to select the Channel or Station Clock from which the Clock is received. Valid values: 0 = notApplicable 1..28 (= CH1.… |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.5.1.1.19 |
||||||||||||||
|
optIncomingAlarm
State of the Incoming Alarm (On/Off), via Alarm Relay connector.
This object is applicable only for Optimux-T3. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.5.1.1.20 |
||||||||||||||
|
optDefChannelSet
Default configuration for all Optimux Channels: T1 or E1.
This object is applicable only for Optimux-T3. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.5.1.1.21 |
||||||||||||||
|
optWaitToRestore
This parameter defines the time (sec) device has to wait in the redundant
state until it goes back to the default Link. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.5.1.1.22 |
||||||||||||||
|
optEnforcedLink
This parameter is not applicable when optRedundancyCnf = off.
It enables user to enforce a Link in spite of the redundancy mechanism. Selecting the noEnforcement(2) value cause return to the usual rules of the redundan… |
Enumerationr/w | .1.3.6.1.4.1.164.3.5.1.1.23 |
||||||||||||||
|
optFlipUponEvent
This object allows user to define if Flip to the other port will
be performed (or not), for certain possible events. Each event is represented by a bit. The value of the object is a sum of 2**n, according to the bits ha… |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.5.1.1.24 |
||||||||||||||
|
optHwMaskChAlr
Mask Channel Alarm done by the HW dip-switches.
This object is applicable only for Optimux cards. The value of this object is a sum of 2**n, where n is a bit assigned to a certain Channel. For Optimux-16E1: Bit0: … |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.5.1.1.25 |
||||||||||||||
|
optServiceChExist
Service Channel Existence indication for each Optimux (local/remote).
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.5.1.1.26 |
||||||||||||||
|
optMaskSystemAlr
Mask all system alarms for each Optimux (local/remote).
|
Enumerationr/w Constraints: range: 0-255 |
.1.3.6.1.4.1.164.3.5.1.1.27 |
optMxModuleTable
table.1.3.6.1.4.1.164.3.5.2
·
1 row entry
·
8 columns
This table defines the type of the module enrolled in each slot.
An entry in the Optimux Module table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
optMdIdx
optMdIdx = 1 is for local Optimux.
optMdIdx = 2 is for remote Optimux. |
Enumeration | .1.3.6.1.4.1.164.3.5.2.1.1 |
||||
|
optMdSltIdx
For Optimux XL:
Slot A = 1, Slot B = 2, Slot C = 3, Slot D = 4, Slot Link = 5, Slot BU = 6 . For FomiE3/R3: Slot of Station Clock = 3, Slot of Electrical Link = 4, Slot of Optical Main Link = 5, Slot of Optical Backup L… |
SNMPv2-SMIInteger32 Constraints: range: 1-255Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.5.2.1.2 |
||||
|
optMdType
Module Type and number of connectors.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.5.2.1.3 |
||||
|
optMdHWVersion
HW Version of the module.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.5.2.1.4 |
||||
|
optMdModLed
The meaning of each bit depends on the module type.
|
OctetString Constraints: range: 0-239 |
.1.3.6.1.4.1.164.3.5.2.1.5 |
||||
|
optMdWaveLength
Wave Length of T3/E3 Optical Links in [nm] and specification if Laser or not.
|
Enumeration Constraints: range: 0-239 |
.1.3.6.1.4.1.164.3.5.2.1.6 |
||||
|
optMdTimingMode
The Module Timing mode.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.5.2.1.7 |
||||
|
optMdStatusIndication
Indication of Alarm and test status of
all interfaces served by a module. For Optimux155, Each interface will be represented by 2 bits where the 1st bit (right) will specify alarm status and t… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.5.2.1.8 |
optFramerPortTable
table.1.3.6.1.4.1.164.3.5.3.1
·
1 row entry
·
4 columns
This table defines the connection of every ch of the framer.
An entry in the Optimux Framer port Connections table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
optFramerPortIdx
The channel of the Framer. Valid values:1..31.
|
SNMPv2-SMIInteger32 Constraints: range: 1-31Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.5.3.1.1.1 |
|
optFramerPortConn
This parameter defines the Framer channel connection.
The values will be as follows: Loop(1),Ch1(2),Ch2(3)....,Ch28(29). |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.5.3.1.1.2 |
|
optFramerPortType
This parameter defines the Framer port (E1 or T1).
|
Enumerationr/w | .1.3.6.1.4.1.164.3.5.3.1.1.3 |
|
optFramerPortFeIpAddr
The IP Address of the opposite optimux in the ring,which this channel connected to.
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.3.5.3.1.1.4 |
optRingNeTable
table.1.3.6.1.4.1.164.3.5.3.4
·
1 row entry
·
2 columns
This table defines which optimuxes are in the ring and the IP Address of each one.
An entry in the Optimux Ring Connections table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
optRingNeIdx
The index of the optimux, starting with next optimux to the current optimux.
Valid values:1..28. The index is according to the order of optimux connections in the ring. Example: 1=next optimux to the current, in the r… |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.5.3.4.1.1 |
||||||||||||||||||||||||||||||||||||
|
optRingNeIpAddr
The IP Address of each optimux in the ring, according to optRingNeIdx.
|
RFC1155-SMIIpAddress Enumerated Values:
Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.3.5.3.4.1.2 |
sysGenKmuxTable
table.1.3.6.1.4.1.164.3.6.1.1.1
·
1 row entry
·
11 columns
A table containing the general Kmux parameters.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
sysGenConfigIdx
This object indicates the Configuration number (1..255)
referred. Value of 255 specifies the TmpCnfg (Scratch). The write operation in this Table is valid only to the TmpCnfg entry. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.1.1.1.1.1 |
||||||||||||||||||||||||
|
sysGenFlipIntegration
The parameter is relevant only for KM-2100 and only when
sysGenMlMode=redundancy, switchBackup, or priorityBumping. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.1.1.1.1.2 |
||||||||||||||||||||||||
|
sysGenMlMode
The Main Link operation mode. Determines how many links are
used (one/two) and how they are used. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.1.1.1.1.3 |
||||||||||||||||||||||||
|
sysGenFaType
Frame Allocation type:
auto - automatic frame allocation (by Kmux) manual - manually configured frame allocation (by user). |
Enumerationr/w | .1.3.6.1.4.1.164.3.6.1.1.1.1.4 |
||||||||||||||||||||||||
|
sysGenLinkRecovery
The parameter determines the Link Recovery mode.
The parameter is relevant only when the sysGenMlMode is either switchBackup or priorityBumping. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.1.1.1.1.5 |
||||||||||||||||||||||||
|
sysGenLinkSourceClock
The source clock for the links. The parameter is relevant
only for KM-2100 having a KDI or KDI/CH cards. ML-A or ML-B are selectable only when sysGenMlMode=dual or priorityBumping. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.1.1.1.1.6 |
||||||||||||||||||||||||
|
sysGenMngBwA
The required management rate for ML-A, in bps. It is very important when a remote
unit is managed. The selected value must be < ML-A Rate value. 0 = None or not applicable 800 bps = minimum value 19200 bps = maximum… |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.6.1.1.1.1.7 |
||||||||||||||||||||||||
|
sysGenMngBwB
The required management rate for ML-B, in bps. It is very important when a remote
unit is managed. The selected value must be < ML-B Rate value. 0 = None or not applicable 800 bps = minimum value 19200 bps = maximum… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.6.1.1.1.1.8 |
||||||||||||||||||||||||
|
sysGenAutoDialSlot
This object indicates the IO-SLOTs that can be used to initiate Automatic
DialUp. This field will be applicable when KML.10 is a ML and its prtIsdnSwitchMode=auto. Each IO Slot is represented by a bit: 11 ...........… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.6.1.1.1.1.9 |
||||||||||||||||||||||||
|
sysGenResetBypassEnable
Enable/Disable Reset Bypass operation when a KDI card exists
and one of its links failed. notApplicable - when no KDI card exists in the Hub. |
Enumerationr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.6.1.1.1.1.10 |
||||||||||||||||||||||||
|
sysGenRebuildFrame
How to rebuild frame (when a CH is connected/disconnected):
automatically - immediately, by automatic frame allocation (by Kmux) manually - manually configured frame allocation (by user), or Rebuild Frame command to ML… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.1.1.1.1.11 |
sysBackupTable
table.1.3.6.1.4.1.164.3.6.1.3.1
·
1 row entry
·
5 columns
A table containing the backup parameters.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
sysBackupConfigIdx
This object indicates the Configuration number (1..255)
referred. Value of 255 specifies the TmpCnfg (Scratch). |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.1.3.1.1.1 |
||||||||||||||||||||||
|
sysBackupDatabase
Determines the database to switch to, when ML recovery occurs.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.6.1.3.1.1.2 |
||||||||||||||||||||||
|
sysBackupMode
isdn - for connection to ISDN network.
pstn - for connection to PSTN network. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.1.3.1.1.3 |
||||||||||||||||||||||
|
sysBackupDialTimeout
The dial timeout in seconds (when backup is attempted).
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.1.3.1.1.4 |
||||||||||||||||||||||
|
sysBackupOptions
The Backup options:
noBackup - No backup is applicable line - Line Data backup path - Line Mng backup . |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.1.3.1.1.5 |
sysBackupAgendaTable
table.1.3.6.1.4.1.164.3.6.1.3.2
·
1 row entry
·
5 columns
A table containing the backup schedule. It is possible to define 4 different time zone schedules per day of the week.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
sysBackupCfgIdx
This object indicates the Configuration number (1,255)
referred. Write operation for the table entries is allowed only to the temporary configuration (255). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.1.3.2.1.1 |
||||||||||||||||||
|
sysBackupDay
Day of the week.
|
Enumeration | .1.3.6.1.4.1.164.3.6.1.3.2.1.2 |
||||||||||||||||||
|
sysBackupZone
The time zone.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.1.3.2.1.3 |
||||||||||||||||||
|
sysBackupEndTime
The end time for this time zone. The format is HH:MM. For
example 23:59. For Zone 4, End Time = 23:59 (constant). |
OctetStringr/w | .1.3.6.1.4.1.164.3.6.1.3.2.1.4 |
||||||||||||||||||
|
sysBackupStatus
Enable or disable this backup schedule entry.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.6.1.3.2.1.5 |
sysFrameAllocationTable
table.1.3.6.1.4.1.164.3.6.1.4.1
·
1 row entry
·
5 columns
A table for manually configuring the frame allocation. The table will contain always all the programmed cards' ports. sysFaNumOfBits
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
sysFaConfigIdx
This object indicates the Configuration number (1..255)
referred. Value of 255 specifies the TmpCnfg (Scratch). Write operation for the table entries is allowed only to Config=255. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.1.4.1.1.1 |
||||||||||||
|
sysFaLink
The main link on which frame allocation is done.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.1.4.1.1.2 |
||||||||||||
|
sysFaPrt
The Frame Allocation (FA) port.
The ports will be specified by: Slot*100+Ch. - for Bypass of KDI or KDI/CH the port will be: Slot*100+11 (internal-1=non-existent port ; just for use of the same MI… |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.6.1.4.1.1.3 |
||||||||||||
|
sysFaStartingBit
The data starting bit for the channel.
- for Bypass of KDI or KDI/CH, this will be the Starting Bit of the Bypass Window on the specific sysFaLink. - for Control Signals of a card ( sysFaPrt=Slot*100+0) this will … |
Integer32r/w | .1.3.6.1.4.1.164.3.6.1.4.1.1.4 |
||||||||||||
|
sysFaNumOfBits
The data size in number of bits for the channel.
- for Bypass of KDI or KDI/CH, this will be the Bypass Window size. In this case, this value must be the same for both MLs. - for Control Signals of a card ( sysFaP… |
Integer32r/w | .1.3.6.1.4.1.164.3.6.1.4.1.1.5 |
.1.3.6.1.4.1.164.3.6.1.5
·
1 row entry
·
5 columns
Disconnect Supervision Event table.
An entry in the table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
sysDsEventIdx
This object indicates a unique Event Index.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.6.1.5.1.1 |
|
sysDsEventSlot
This object indicates a unique number of the slot position,
where the KVF.6 or KVF.8 card is inserted, and the Disconnect Supervision Event occurred. |
Enumeration | .1.3.6.1.4.1.164.3.6.1.5.1.2 |
|
sysDsEventTS
This object defines the Time Slot number,
where the Disconnect Supervision Event occurred. |
Integer32 | .1.3.6.1.4.1.164.3.6.1.5.1.3 |
|
sysDsEventDescr
This object defines the Description
of the Disconnect Supervision Event. |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.6.1.5.1.4 |
|
sysDsEventDateAndTime
This object defines the Date and Time,
when the Disconnect Supervision Event occurred. It will be displayed in the following format: YYYY-MM-DD HH:MM:SS. |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.6.1.5.1.5 |
mdlKmxTable
table.1.3.6.1.4.1.164.3.6.2.2
·
1 row entry
·
12 columns
A table.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
mdlKmxConfigIdx
This object indicates the Configuration number (1..255)
referred. Value of 255 specifies the TmpCnfg (Scratch). Write operation for the table entries is allowed only to Config=255. |
Integer32 | .1.3.6.1.4.1.164.3.6.2.2.1.1 |
||||||||||
|
mdlKmxSlotIdx
This object indicates a unique number of the slot position
in which the module is inserted. |
Enumeration | .1.3.6.1.4.1.164.3.6.2.2.1.2 |
||||||||||
|
mdlKmxOperatedMl
The main link for this card.
The field is relevant only for ML modes of Dual, Priority Bumping and Switched Backup. |
Enumerationr/w | .1.3.6.1.4.1.164.3.6.2.2.1.3 |
||||||||||
|
mdlKmxMlAtoMlBPrio
ML-A to ML-B Priority.
The field is relevant only for ML modes of Priority Bumping and Switched Backup. |
Enumerationr/w | .1.3.6.1.4.1.164.3.6.2.2.1.4 |
||||||||||
|
mdlKmxMlBtoMlAPrio
ML-B to ML-A Priority.
The field is relevant only for ML modes of Priority Bumping. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.2.2.1.5 |
||||||||||
|
mdlKmxOutSrvMethod
Out of service method. For KVC.1 and KVC.1M all values are
applicable. For KVC.2, KVC.3, KVF.1, KVF.3, KVF.4: only forcedIdle and forcedBusy are applicable. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.2.2.1.6 |
||||||||||
|
mdlKmxV54Config
Relevant only for KLS.1/New card.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.6.2.2.1.7 |
||||||||||
|
mdlKmxTiming
Applicable only for KHSU.1, KHSU.2, KVF.4/S0, KVC.3/S0 cards.
lt - local timing nt - network timing te - terminal equipment |
Enumeration | .1.3.6.1.4.1.164.3.6.2.2.1.8 |
||||||||||
|
mdlKmxIsdnDisconnectCause
This attribute indicates the cause of the ISDN Disconnection for
the card installed in the specific slot position. The value can be 0..255. The numeric values have a well known meaning for ISDN experts. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.3.6.2.2.1.9 |
||||||||||
|
mdlKmxIsdnCallStatus
This attribute indicates the current ISDN Call Status for
the card installed in the specific slot position. |
Enumeration | .1.3.6.1.4.1.164.3.6.2.2.1.10 |
||||||||||
|
mdlKmxIsdnLayer1State
This attribute indicates the ISDN Layer 1 State for
the card installed in the specific slot position. |
Enumeration | .1.3.6.1.4.1.164.3.6.2.2.1.11 |
||||||||||
|
mdlKmxIsdnLayer2State
This attribute indicates the ISDN Layer 2 State for
the card installed in the specific slot position. |
Enumeration | .1.3.6.1.4.1.164.3.6.2.2.1.12 |
mdlKvf5PbxTable
table.1.3.6.1.4.1.164.3.6.2.3
·
1 row entry
·
14 columns
Parameters specific to KVF.5, KVF.6 and KVF.8 PBX cards.
An entry in table.
Indexes
prtMlCnfgIdx prtMlIdx
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
mdlKvf5PbxConfigIdx
This object indicates the Configuration number (1..255)
referred. Value of 255 specifies the TmpCnfg (Scratch). Write operation for the table entries is allowed only to Config=255. |
Integer32 Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.6.2.3.1.1 |
||||||||||||||||||||||||||||||||
|
mdlKvf5PbxSlotIdx
This object indicates a unique number of the slot position
in which the module is inserted. |
Enumeration | .1.3.6.1.4.1.164.3.6.2.3.1.2 |
||||||||||||||||||||||||||||||||
|
mdlKvf5PbxSig
Signaling type.
When 'mdlKvf5PbxSig' is valid, 'mdlKvf5PbxSigTxPbx' and 'mdlKvf5PbxSigRxPbx' are not valid. mdlKvf5PbxSig - is supported by KVF.5 OLD SW ver and KVF.6 card. mdlKvf5PbxSigTxPbx and mdlKvf5PbxSigRxPbx -… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.2.3.1.3 |
||||||||||||||||||||||||||||||||
|
mdlKvf5PbxSigMode
Signaling Mode.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.2.3.1.4 |
||||||||||||||||||||||||||||||||
|
mdlKvf5PbxTsAssign
Ts Assignment group. Each KVF.5 card of the Mux should have
a different value. For KVF.5/E1 values: 2,3,4,8,9,10,11,12 are applicable. For KVF.5/T1 values: 2,3,4,5,6,7 are applicable. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.2.3.1.5 |
||||||||||||||||||||||||||||||||
|
mdlKvf5PbxCcsTs
CCS TS of the KVF.5/T1/E1 and KVF.6/T1/E1 card.
It is applicable for Kmux KVF.5 Framer cards and KVF.6 cards when mdlKvf5PbxSig=ccs. Valid values: 1..24 - CCS TS of T1 1..31 - CCS TS of E1 255 - notApplicable (for age… |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.6.2.3.1.6 |
||||||||||||||||||||||||||||||||
|
mdlKvf5PbxOos
'idle' = '0' = on-hook, idle state
'busy' = '1' = off-hook, busy state 'forcedIdle' = SP = both A and B signaling bits are forced to '0' during out-of-service periods. 'forcedBusy' = MK = both A and B sig… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.2.3.1.7 |
||||||||||||||||||||||||||||||||
|
mdlKvf5PbxSigTxPbx
TxPbx signaling means transmit signaling from KM to PBX (KM-->PBX)
When 'mdlKvf5PbxSigTxPbx' is valid, 'mdlKvf5PbxSig' field is not valid. mdlKvf5PbxSig - is supported by KVF.5 OLD SW ver. mdlKvf5PbxSigTxPbx and mdlKv… |
Enumerationr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.164.3.6.2.3.1.8 |
||||||||||||||||||||||||||||||||
|
mdlKvf5PbxSigRxPbx
RxPbx signaling means receive signaling from PBX to KM (PBX-->KM-->KM)
When 'mdlKvf5PbxSigRxPbx' is valid, 'mdlKvf5PbxSig' field is not valid. mdlKvf5PbxSig - is supported by KVF.5 OLD SW ver. mdlKvf5PbxSigTxPbx and md… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.2.3.1.9 |
||||||||||||||||||||||||||||||||
|
mdlKvf5PbxDefABCD
This object determines what KM will send for the ABCD Bits that
are not 'filled' by the dynamic signaling. This field is applicable only for signaling transmit to PBX ('mdlKvf5PbxSigTxPbx'). For KVF.5 cards: valid ran… |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.2.3.1.10 |
||||||||||||||||||||||||||||||||
|
mdlKvf5PbxFramerSlot
This object indicates the Framer's slot number this card belongs to.
Several cards having the same mdlKvf5PbxFramerSlot value, work together as a group. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.2.3.1.11 |
||||||||||||||||||||||||||||||||
|
mdlKvf5PbxCcsRate
Determines the Ccs speed - for KVF.6 and KVF.5 cards.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.6.2.3.1.12 |
||||||||||||||||||||||||||||||||
|
mdlKvf5PbxTxAbcdBit
This object is applicable only for KVF.6 and KVF.8 cards, when mdlKvf5PbxSig=cas(6).
It represents 4 parameters, by 2 Octets : D Bit Code-MSB nibble, C Bit Code- nibble, B Bit Code- nibble, A Bit Code-LSB nibble. … |
OctetStringr/w | .1.3.6.1.4.1.164.3.6.2.3.1.13 |
||||||||||||||||||||||||||||||||
|
mdlKvf5PbxHdlcCrc
Determines the CRC type of HDLC protocol, that CCS signaling
is working with. Applicable for KVF.6 cards when Signaling is CCS (only). |
Enumerationr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.3.6.2.3.1.14 |
.1.3.6.1.4.1.164.3.6.2.4
·
1 row entry
·
17 columns
Disconnect Supervision table.
An entry in the table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
mdlDsConfigIdx
This object indicates the Configuration number (1..255)
referred. Value of 255 specifies the TmpCnfg (Scratch). Write operation for the table entries is allowed only to Config=255. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.2.4.1.1 |
||||||||||||||||||||||||||
|
mdlDsSlotIdx
This object indicates a unique number of the slot position
in which the module is inserted. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.2.4.1.2 |
||||||||||||||||||||||||||
|
mdlDs
This object defines which terms will cause disconnection of call.
disable = the Disconnect Supervision feature is disabled. In this case, all other objects of this table are irrelevant. Remote Sanity - I… |
Enumerationr/w Constraints: range: 0-25 |
.1.3.6.1.4.1.164.3.6.2.4.1.3 |
||||||||||||||||||||||||||
|
mdlDsUserLoc
User located in local or remote station.
Local station will disconnect the call actually if needed. Applicable only if Disconnect Supervision (mdlDs) is different from disable. Should be a Sanity check between the mdlDs… |
Enumerationr/w Constraints: range: 0-25 |
.1.3.6.1.4.1.164.3.6.2.4.1.4 |
||||||||||||||||||||||||||
|
mdlDsMode
This object defines the action, which will be done after remote disconnect occurred.
This object is relevant only when mdlDsUserLoc = local(3). Applicable only if Disconnect Supervision (mdlDs) is different from disable… |
Enumerationr/w Constraints: range: 0-25 |
.1.3.6.1.4.1.164.3.6.2.4.1.5 |
||||||||||||||||||||||||||
|
mdlDsSilence
This object defines the silence period needed for an indication (seconds).
Applicable only if Disconnect Supervision (mdlDs) is different from disable AND includes 'Silence', i.e. is one of the following: remote… |
SNMPv2-SMIInteger32r/w Constraints: range: 0-25Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.6.2.4.1.6 |
||||||||||||||||||||||||||
|
mdlDsClrFwSig
This object defines the Clear FWD Signal (A,B,C,D bits) for KVF.6 cards.
This object is an indication of Near PBX to the Far PBX, that it wants to disconnect the call. Applicable only if Disconnect Supervision (mdlDs) … |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.2.4.1.7 |
||||||||||||||||||||||||||
|
mdlDsAnswerSig
This object defines the Clear FWD Signal (A,B,C,D bits) for KVF.6 cards.
This object is an indication of Near PBX to the Far PBX, taht a call is present now on the line. Applicable only if Disconnect Supervision (md… |
OctetStringr/w | .1.3.6.1.4.1.164.3.6.2.4.1.8 |
||||||||||||||||||||||||||
|
mdlDsClrBwSig
This object defines the Clear FWD Signal (A,B,C,D bits) for KVF.6 cards.
This object is an indication of Far PBX to the Near PBX, that the call was disconnected (on the Far side). Applicable only if Disconnect Super… |
OctetStringr/w | .1.3.6.1.4.1.164.3.6.2.4.1.9 |
||||||||||||||||||||||||||
|
mdlDsFbtLowFreq
First frequency in Fast Busy Tone (Fbt) combination (Hz).
Valid values: 0..4000,4095. 4095 = notApplicable. Available only if Disconnect Supervision (mdlDs) is different from disable AND includes 'Tones' (Fast Busy)… |
SNMPv2-SMIInteger32r/w Constraints: range: 1-255Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.6.2.4.1.10 |
||||||||||||||||||||||||||
|
mdlDsFbtHighFreq
Second frequency in Fast Busy Tone (Fbt) combination (Hz).
Valid values: 0..4000,4095. 4095 = notApplicable. Available only if Disconnect Supervision (mdlDs) is different from disable AND includes 'Tones' (Fast Busy… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.6.2.4.1.11 |
||||||||||||||||||||||||||
|
mdlDsFbtTimeOn1
This object defines the Time On 1 cadence (in msec).
Valid values: 0,10,20..(every 10 msec)..10000,10230. 0 = disable, 10230 = notApplicable. Available only if Disconnect Supervision (mdlDs) is different from disable … |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.6.2.4.1.12 |
||||||||||||||||||||||||||
|
mdlDsFbtTimeOff1
This object defines the Time Off 1 cadence (in msec).
Valid values: 0,10,20..(every 10 msec)..10000,10230. 0 = disable, 10230 = notApplicable. Available only if Disconnect Supervision (mdlDs) is different from d… |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.6.2.4.1.13 |
||||||||||||||||||||||||||
|
mdlDsFbtTimeOn2
This object defines the Time On 2 cadence (in msec).
Valid values: 0,10,20..(every 10 msec)..10000,10230. 0 = disable, 10230 = notApplicable. Available only if Disconnect Supervision (mdlDs) is different from di… |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.6.2.4.1.14 |
||||||||||||||||||||||||||
|
mdlDsFbtTimeOff2
This object defines the Time Off 2 cadence (in msec).
Valid values: 0,10,20..(every 10 msec)..10000,10230. 0 = disable, 10230 = notApplicable. Available only if Disconnect Supervision (mdlDs) is different from d… |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.6.2.4.1.15 |
||||||||||||||||||||||||||
|
mdlDsFbtLowFreqLevel
First frequency level for Fast Busy Tone (Fbt) in dBm units.
Valid values: -32..31. Available only if Disconnect Supervision (mdlDs) is different from disable AND includes 'Tones' (Fast Busy), i.e. is one of the fol… |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.6.2.4.1.16 |
||||||||||||||||||||||||||
|
mdlDsFbtHighFreqLevel
Second frequency level for Fast Busy Tone (Fbt) in dBm units.
Valid values: -32..31. Available only if Disconnect Supervision (mdlDs) is different from disable AND includes 'Tones' (Fast Busy), i.e. is one of the fo… |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.6.2.4.1.17 |
prtMlFrameStatsTable
table.1.3.6.1.4.1.164.3.6.3.1.1
·
1 row entry
·
9 columns
Frame diagnostics for the main links.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtMlFrameIdx
The prtGenPrtIdx index of this link.
Slot*100+1. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.6.3.1.1.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtMlFrameSlt
This attribute indicates a unique number to identify the slot
where the ML card is inserted. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.3.1.1.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtMlBitWeight
This attribute indicates the Bit Weight [bps/bit] used for
the selected prtMlFrameSlt. The Bit Weight is according to the ML Speed. |
Enumeration | .1.3.6.1.4.1.164.3.6.3.1.1.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtMlDataUsage
Data usage in [bits].
In order to convert it to 'bps' units, the 'bits' should be multiplied by prtMlBitWeight value. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.6.3.1.1.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtMlControlSig
Control Signals usage of the ML in [bits].
In order to convert it to 'bps' units, the 'bits' should be multiplied by prtMlBitWeight value. |
SNMPv2-SMIInteger32 Constraints: range: 1-255Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.6.3.1.1.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtMlDownload
Download bandwidth usage of the ML in [bits].
In order to convert it to 'bps' units, the 'bits' should be multiplied by prtMlBitWeight value. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.6.3.1.1.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtMlSync
Sync bandwidth usage of the ML in [bits].
In order to convert it to 'bps' units, the 'bits' should be multiplied by prtMlBitWeight value. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.6.3.1.1.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtMlTotalUsage
Total bandwidth usage of the ML in [bits].
In order to convert it to 'bps' units, the 'bits' should be multiplied by prtMlBitWeight value. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.6.3.1.1.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
prtMlTotalFree
Free bandwidth of the ML in [bits].
In order to convert it to 'bps' units, the 'bits' should be multiplied by prtMlBitWeight value. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.6.3.1.1.1.9 |
prtMlTable
table.1.3.6.1.4.1.164.3.6.3.1.2
·
1 row entry
·
11 columns
Parameters for the main links. KML.1 - KML.6, KML.7(T1), KML.8(E1), KML.10(ISDN) and KML.F(KML.11 Fiber-optic).
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtMlCnfgIdx
This attribute indicates the Idx of the Config being accessed.
Idx of 255 relates to the Temporary (Scratch) Config. Write operation for the table entries is allowed only to Config=255. |
Integer32 | .1.3.6.1.4.1.164.3.6.3.1.2.1.1 |
||||||||||||||||||||||||
|
prtMlIdx
The prtGenPrtIdx index of this link.
Slot*100+1 . |
SNMPv2-SMIInteger32 Constraints: range: 1-255Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.6.3.1.2.1.2 |
||||||||||||||||||||||||
|
prtMlSlt
This attribute indicates a unique number to identify the slot where
the ML card is inserted in. |
Enumeration | .1.3.6.1.4.1.164.3.6.3.1.2.1.3 |
||||||||||||||||||||||||
|
prtMlTiming
The clock source for this link.
For KML.1-KML.4, valid values: dte, eDce, or dce. For KML.5-KML.8, valid values: int or lbt. notApplicable - for KML.10 and KML.F. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.3.1.2.1.4 |
||||||||||||||||||||||||
|
prtMlBufferSize
The buffer size in bits for absorbing timing jitters.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.6.3.1.2.1.5 |
||||||||||||||||||||||||
|
prtMlDsrCts
Determines the DSR and CTS signal handling.
notApplicable - for KML.4-KML.6. |
Enumerationr/w | .1.3.6.1.4.1.164.3.6.3.1.2.1.6 |
||||||||||||||||||||||||
|
prtMlSpeed
Determines the Main Link port speed.
KML.1, KML.3, KML.4 support (Kbps): 9.6, 14.4, 19.2, 28.8, 32, 48, 56, 64, 128, 192, 256, 384, 512, 768, 1024, 1536. KML.2 supports (Kbps): 9.6… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.3.1.2.1.7 |
||||||||||||||||||||||||
|
prtMlStartTS
0=notApplicable - for all cards except KML.7, KML.8
For KML.7 - valid values: 1..24 For KML.8 - valid values: 1..31. |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.3.1.2.1.8 |
||||||||||||||||||||||||
|
prtMlBypassTs16
notApplicable - for all cards except KML.8.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.3.1.2.1.9 |
||||||||||||||||||||||||
|
prtMlCallMode
This object will be used when using an external modem linked to the
KML.1-KML.4 or KML.10 cards. Initiate - KML card can initiate calls to the modem Listen - KML card listens only ; cannot initiate a call. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.3.1.2.1.10 |
||||||||||||||||||||||||
|
prtMlBondingEnable
Disable/Enable applying the Bonding process, for KML.10 cards.
notApplicable - for all cards except KML.10. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.3.1.2.1.11 |
prtMlIsdnTable
table.1.3.6.1.4.1.164.3.6.3.1.3
·
1 row entry
·
10 columns
Parameters for ISDN main links: KML.10.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtMlIsdnCnfgIdx
This attribute indicates the Idx of the Config being accessed.
Idx of 255 relates to the Temporary (Scratch) Config. Write operation for the table entries is allowed only to Config=255. |
Integer32 Constraints: range: 2-2 |
.1.3.6.1.4.1.164.3.6.3.1.3.1.1 |
||||||||||||||||||
|
prtMlIsdnIdx
The prtGenPrtIdx index of this link.
Slot*100+1 . |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.6.3.1.3.1.2 |
||||||||||||||||||
|
prtMlIsdnSlt
This attribute indicates a unique number to identify the slot where
the ML card is inserted in. |
Enumeration | .1.3.6.1.4.1.164.3.6.3.1.3.1.3 |
||||||||||||||||||
|
prtMlIsdnMode
ISDN Mode.
switched - when ML Mode is Switched Backup. leased - in all other cases. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.3.1.3.1.4 |
||||||||||||||||||
|
prtMlIsdnStandard
The ISDN standard.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.3.1.3.1.5 |
||||||||||||||||||
|
prtMlIsdnLocSubNum
Local sub-number. 4 chars (digits 0..9).
|
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.3.1.3.1.6 |
||||||||||||||||||
|
prtMlIsdnLocNum
Local number. 20 chars (digits: 0..9).
|
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.3.1.3.1.7 |
||||||||||||||||||
|
prtMlIsdnOutSubNum
Out sub-number. 4 chars (digits 0..9).
|
OctetStringr/w Constraints: range: 0-2 |
.1.3.6.1.4.1.164.3.6.3.1.3.1.8 |
||||||||||||||||||
|
prtMlIsdnBackupCallNum
Backup call number. 20 chars (digits: 0..9).
|
OctetStringr/w | .1.3.6.1.4.1.164.3.6.3.1.3.1.9 |
||||||||||||||||||
|
prtMlIsdnInNumMode
In number mode.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.6.3.1.3.1.10 |
prtHsLsTable
table.1.3.6.1.4.1.164.3.6.3.2.1
·
1 row entry
·
12 columns
Parameters for the High and Low speed channels. Cards: KLS.1,KLS.2, KHS.1, KHS.2, KDI/CH, KHSU.1, KHSU.2, KHS.703.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
prtHsLsCnfgIdx
This attribute indicates the Idx of the Config being accessed.
Idx of 255 relates to the Temporary (Scratch) Config. Write operation for the table entries is allowed only to Config=255. |
Integer32 | .1.3.6.1.4.1.164.3.6.3.2.1.1.1 |
||||
|
prtHsLsIdx
The prtGenPrtIdx index of this channel.
In KHSU.1 and KHSU.2 there are three ISDN sub-channels on each port (2B+D).The sub-channels are numbered: Slot*100+11 ; Slot*100+12 ; Slot*100+13 (First Port), Slot*100+14 ; S… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.6.3.2.1.1.2 |
||||
|
prtHsLsSlt
This attribute indicates a unique number to identify the slot where
the card is inserted in. In the 2104 Unit the entries kmxIO5(111)..kmxIO12(118) are not valid. The entry kmxOpt(106) is valid only for KDI/CH card. |
Enumeration Constraints: range: 1-100 |
.1.3.6.1.4.1.164.3.6.3.2.1.1.3 |
||||
|
prtHsLsCommProtocol
The communication protocol.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.6.3.2.1.1.4 |
||||
|
prtHsLsAsyncDataLen
Async Data Length in Bits.
notApplicable - when prtHsLsCommProtocol=sync or notApplicable. |
Enumerationr/w | .1.3.6.1.4.1.164.3.6.3.2.1.1.5 |
||||
|
prtHsLsTiming
The variable is RW only if the communications protocol is
sync. When the comm protocol is async, the variable is RO and its value is DCE. |
Enumerationr/w | .1.3.6.1.4.1.164.3.6.3.2.1.1.6 |
||||
|
prtHsLsCtrlSignal
Control signals.
|
Enumerationr/w Constraints: range: 1-40 |
.1.3.6.1.4.1.164.3.6.3.2.1.1.7 |
||||
|
prtHsLsCts
CTS Signal.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.3.2.1.1.8 |
||||
|
prtHsLsRtsCtsDelay
RTS-CTS delay in ms.
notApplicable - when prtHsLsCts=on. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.3.2.1.1.9 |
||||
|
prtHsLsDsrMode
DSR Mode.
|
Enumerationr/w Constraints: range: 0-6 |
.1.3.6.1.4.1.164.3.6.3.2.1.1.10 |
||||
|
prtHsLsSpeed
KLS.1 supports (Kbps): 0.3, 0.6, 1.2, 2.4, 4.8, 9.6, 19.2, 38.4.
KLS.1/New, KDI/CH support (Kbps): Group 1: 0.3, 0.6, 1.2, 2.4, 4.8, 9.6, 19.2, 38.4 … |
Enumerationr/w Constraints: range: 0-6 |
.1.3.6.1.4.1.164.3.6.3.2.1.1.11 |
||||
|
prtHsLsUType
U Interface Type. Applicable for KHSU.1/2 cards.
The value will be the same for B1 and B2 pair; B3 and B4. |
Enumerationr/w | .1.3.6.1.4.1.164.3.6.3.2.1.1.12 |
prtTreMbeTable
table.1.3.6.1.4.1.164.3.6.3.3.2
·
1 row entry
·
6 columns
The write operation into the Table Objects is valid only to the TmpCnfg entry. Parameters for the channels of the TRE and MBE cards: KTRE, KMBE, KMBE/NEW.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtTreMbeCnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg. |
Integer32 Constraints: range: 0-6 |
.1.3.6.1.4.1.164.3.6.3.3.2.1.1 |
||||||||||
|
prtTreMbeIdx
A unique port identifier within the card.
Slot*100+11 . |
SNMPv2-SMIInteger32 Constraints: range: 0-6Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.6.3.3.2.1.2 |
||||||||||
|
prtTreMbeSlt
This attribute indicates a unique number to identify the slot where
the card is inserted in. In the 2104 Unit the entries kmxIO5(111)..kmxIO12(118) are not valid. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.3.3.2.1.3 |
||||||||||
|
prtTreMbeLan
This attribute indicates whether the TRE/MBE port is operated
as main or remote bridge. Default=remote. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.3.3.2.1.4 |
||||||||||
|
prtTreMbeLanRate
This attribute indicates the Rate of the TRE port
in Mbit/sec. Default-r4M. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.3.3.2.1.5 |
||||||||||
|
prtTreMbeLinkSpeed
The Link Speed.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.6.3.3.2.1.6 |
prtVoiceFaxTable
table.1.3.6.1.4.1.164.3.6.3.4.1
·
1 row entry
·
20 columns
The write operation into the Table Objects is valid only
to the TmpCnfg entry. Parameters for the channels of the
Voice and Fax channels.
Cards: KVC.1/E&M, KVC.1/FXO, KVC.1/FXS,
KVC.1M/E&M, KVC.1M/FXO, KVC.1M/FXS, KVC.1M/FXSW,
KVC.2/E&M, KVC.2/FXO, KVC.2/FXS,
KVC.2/1/E&M,KVC.2/1/FXO,KVC.2/1/FXS,
KVC.3/E&M, KVC.3/FXO, KVC.3/FXS, KVC.3/S0
KVF.1/E&M, KVF.1/FXO, KVF.1/FXS,
KVF.3/E&M, KVF.3/FXO, KVF.3/FXS,
KVF.4/E&M, KVF.4/FXO, KVF.4/FXS, KVF.4/FXSW, KVF.4/S0,
KVF.4/FXO3, KVF.4/FXS3, KVF.4/NS0
KVF.5 family, KVF.6 family, KVF.8 family.
An entry in table.
Indexes
chIndex
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtVoiceFaxCnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed. Idx 255 relates to the TmpCnfg. |
Integer32 Constraints: range: 1-6 |
.1.3.6.1.4.1.164.3.6.3.4.1.1.1 |
||||||||||||||||
|
prtVoiceFaxIdx
A unique identifier of the port, within the card.
Slot*100+Ch external ports: Ch=1..10 internal ports (sub-channels): Ch=11..20. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.6.3.4.1.1.2 |
||||||||||||||||
|
prtVoiceFaxSlt
This attribute indicates a unique number to identify the slot where
the card is inserted in. In the 2104 Unit the entries kmxIO5(111)..kmxIO12(118) are not valid. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.3.4.1.1.3 |
||||||||||||||||
|
prtVoiceFaxTransGain
Transmit gain in dBm. A value of 255 is for notApplicable.
The value will be: real value+50dBm (in order to avoid negative values). |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.6.3.4.1.1.4 |
||||||||||||||||
|
prtVoiceFaxReceiveGain
Receive gain in dBm. A value of 255 is for notApplicable.
The value will be: real value+50dBm (in order to avoid negative values). |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.6.3.4.1.1.5 |
||||||||||||||||
|
prtVoiceFaxWire
Applicable only for E&M cards.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.3.4.1.1.6 |
||||||||||||||||
|
prtVoiceFaxTimeOut
Fax timeout in seconds.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.6.3.4.1.1.7 |
||||||||||||||||
|
prtVoiceFaxEchoCanceler
Echo canceler activation.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.6.3.4.1.1.8 |
||||||||||||||||
|
prtVoiceFaxSpeed
The channel speed.
For KVF.6 and KVF.8 cards, each value will represent [4 x value], since each channel (Internal or External) is comprised of 4 sub-channels having the selected value. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.3.4.1.1.9 |
||||||||||||||||
|
prtVoiceFaxMeterRate
This entry is valid to KVF.4/FXO3 and KVF.4/FXS3.
Meter Rate means rate of Call Meter in Public Phones, in KHz units. Must be equal for both channels. |
Enumerationr/w | .1.3.6.1.4.1.164.3.6.3.4.1.1.10 |
||||||||||||||||
|
prtVoiceFaxCodingLaw
Coding Law. This entry is valid for KVF.4/NS0 external channel and
KVF.6 internal channels. |
Enumerationr/w | .1.3.6.1.4.1.164.3.6.3.4.1.1.11 |
||||||||||||||||
|
prtVoiceFaxOperMode
Operation Mode. This parameter is valid for KVF.6 and KVF.8 family.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.3.4.1.1.12 |
||||||||||||||||
|
prtVoiceFaxSigInOutband
This object is applicable for KVF.4/FXO3, KVF.4/FXS3, KVF.8 family cards.
For KVF.4/FXO3, KVF.4/FXS3: Octet 1 for Receive parameters. Octet 2 for Transmit parameters. It represents 4 parameters, in each … |
OctetStringr/w | .1.3.6.1.4.1.164.3.6.3.4.1.1.13 |
||||||||||||||||
|
prtVoiceFaxTsGroup
Ts Assignment group. Each KVF.6 internal channel should have
a different value. 's21s22s23s24' = TSs: 21, 22, 23, 24 For KVF.6/E1/16, KVF.6/E1/31 values: 2..9 are applicable. For KVF.6/T1/12, KVF.6/T1/24 values… |
Enumerationr/w | .1.3.6.1.4.1.164.3.6.3.4.1.1.14 |
||||||||||||||||
|
prtVoiceFaxRxFaxGain
FAX Receive gain in dBm.
The value will be: (real value*10)+500dBm (in order to avoid negative and fractional values). |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.6.3.4.1.1.15 |
||||||||||||||||
|
prtVoiceFaxSigHold
Signal Hold in [sec]. Applicable for all KVF.4 cards except S0/NS0.
When a ML fails, instead of interrupting immediately a conversation and connecting it again when ML operation is resumed, user can select to Hold the… |
Enumerationr/w | .1.3.6.1.4.1.164.3.6.3.4.1.1.16 |
||||||||||||||||
|
prtVoiceFaxIfSignaling
Applicable only for KVF.8/FXO, KVF.8/FXS cards.
Interface Analog Signaling. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.3.4.1.1.17 |
||||||||||||||||
|
prtVoiceFaxEMTypes
Applicable only for KVF.8/E&M card.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.6.3.4.1.1.18 |
||||||||||||||||
|
prtVoiceFaxRingFrequency
Applicable only for KVF.8/E&M card.
The Ringing Frequency units will be in Hz. |
Enumerationr/w | .1.3.6.1.4.1.164.3.6.3.4.1.1.19 |
||||||||||||||||
|
prtVoiceFaxSignalingStatus
For KM-2100 this parameter should be Read Only.
This object is applicable for KVF.6 and KVF.5 family cards. It shows the status (0 or 1) of each Signaling Bit (A, B, C, D), for each TS of a TS Group (according … |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.6.3.4.1.1.20 |
sysGenAlarmBuffTable
table.1.3.6.1.4.1.164.3.7.1.1.2
·
1 row entry
·
2 columns
The alarm buffer of the imx.
An entry in table sysGenAlarmBuffTable.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
sysGenAlarmBuffIndex
The index of the alarm buffer Table.
|
Integer32 | .1.3.6.1.4.1.164.3.7.1.1.2.1.1 |
|
sysGenAlarmDescr
The description of the alarm. Up to 80 chars.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.7.1.1.2.1.2 |
sysGenLogTable
table.1.3.6.1.4.1.164.3.7.1.1.4
·
1 row entry
·
2 columns
The call log buffer of the imx.
An entry in table sysGenLogTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
sysGenLogIndex
The index of the log Table.
|
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.3.7.1.1.4.1.1 |
||||||||||||||
|
sysGenLogDescr
The description of the entry in the log buffer. Up to 80 chars.
|
SNMPv2-TCDisplayString Enumerated Values:
Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.3.7.1.1.4.1.2 |
sysCallProfileTable
table.1.3.6.1.4.1.164.3.7.1.2.1.1
·
1 row entry
·
5 columns
A table containing call profile parameters. There are 40 call profiles.
An entry in table sysCallProfileTable.
Indexes
radBridgeCODIfIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
sysCallProfileIndex
A running index for the table.
|
Integer32 | .1.3.6.1.4.1.164.3.7.1.2.1.1.1.1 |
||||||||
|
sysCallProfileConnectCmd
On(2) - Connect the call profile. The agent will automatically
reset the variable to off(1) . |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.7.1.2.1.1.1.2 |
||||||||
|
sysCallProfileDisconnectCmd
On(2) - Disconnect the call profile. The agent will automatically
reset the variable to off(1). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.7.1.2.1.1.1.3 |
||||||||
|
sysCallProfileIncrBwCmd
Increment bandwidth of a call.
The number of channels to increment 1..6. The agent will automatically reset the variable to 0. |
Integer32r/w | .1.3.6.1.4.1.164.3.7.1.2.1.1.1.4 |
||||||||
|
sysCallProfileDecrBwCmd
Decrement bandwidth of a call.
The number of channels to decrement 1..6. The agent will automatically reset the variable to 0. |
Integer32r/w | .1.3.6.1.4.1.164.3.7.1.2.1.1.1.5 |
prtCnfgTable
table.1.3.6.1.4.1.164.3.7.2.1.1
·
1 row entry
·
7 columns
A table containing configuration parameters for the user ports.
An entry in table prtCnfgTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtIndex
The user port index.
|
Integer32 | .1.3.6.1.4.1.164.3.7.2.1.1.1.1 |
||||||||||||||
|
prtCnfgDecrBwChNum
Decrement the port bandwidth by the specified number of channels.
The agent resets the variable to 0. |
Integer32r/w | .1.3.6.1.4.1.164.3.7.2.1.1.1.2 |
||||||||||||||
|
prtCnfgIncrBwChNum
Increment the port bandwidth by the specified number of channels.
The agent resets the variable to 0. |
Integer32r/w | .1.3.6.1.4.1.164.3.7.2.1.1.1.3 |
||||||||||||||
|
prtCnfgDisconnect
Disconnect the port (on(1)). The agent resets the variable to off(2).
|
Enumerationr/w | .1.3.6.1.4.1.164.3.7.2.1.1.1.4 |
||||||||||||||
|
prtCnfgActivateLoop
Activate the desired loop on the port.
The agent will reset the variable to none(1). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.7.2.1.1.1.5 |
||||||||||||||
|
prtCnfgClearLoop
Clear the desired loop from the port. The agent will
reset the variable to none(1) |
Enumerationr/w Constraints: range: 1-3 |
.1.3.6.1.4.1.164.3.7.2.1.1.1.6 |
||||||||||||||
|
prtCnfgLoopStatus
The loop status at this port. The variable is a sum of 2**n where
n is as follows: 0 - Local Loop is on. 1 - Remote Loop is on. 2 - BONDING Loop is on. If the variable is 0, there is no active loop. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.3.7.2.1.1.1.7 |
channelCnfgTable
table.1.3.6.1.4.1.164.3.7.4.1
·
1 row entry
·
3 columns
A table containing configuration parameters for the channels.
An entry in table channelCnfgTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
chIndex
The channel index.
|
Integer32 | .1.3.6.1.4.1.164.3.7.4.1.1.1 |
||||||
|
chCnfgUnlock
Unlock the channel (on). The agent resets the variable to off.
|
Enumerationr/w | .1.3.6.1.4.1.164.3.7.4.1.1.2 |
||||||
|
chCnfgPing
Ping the channel (on). The agent resets the variable to off.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.3.7.4.1.1.3 |
channelStatTable
table.1.3.6.1.4.1.164.3.7.4.2
·
1 row entry
·
1 columns
A table containing status and statistics information for the channels.
An entry in table channelStatTable.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
chStatOperStatus
The operational state of the channel based on a ping operation.
|
Enumeration | .1.3.6.1.4.1.164.3.7.4.2.1.1 |
radBridgeMaskTable
table.1.3.6.1.4.1.164.4.1.3
·
1 row entry
·
20 columns
Mask tables enable definition of forwarding restrictions and control of message flow in the internetwork. Each entry in this table defines a mask statement consisting of up to three mask definitions and an action defined by radBridgeMaskOper. Different types of mask entries are supported, as defined by radBridgeMaskType.
An entry in table radBridgeMaskTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
radBridgeMaskType
Defines the type of mask entry.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.4.1.3.1.1 |
||||||||
|
radBridgeMaskIfIndex
Specifies the if Index of the interface to which the mask is applied.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.3.1.2 |
||||||||
|
radBridgeMaskNum
The Mask entry number, defined by its line number in the mask
table. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.3.1.3 |
||||||||
|
radBridgeMaskDest
Specifies the type of destination address carried by the frame
to which the mask will be applied. Unassigned-condition deactivates the mask entry. |
Enumerationr/w | .1.3.6.1.4.1.164.4.1.3.1.4 |
||||||||
|
radBridgeMaskPat1
Describes the mask field which is either a 16 bit binary pattern,
or four digit hexadecimal pattern. |
OctetStringr/w | .1.3.6.1.4.1.164.4.1.3.1.5 |
||||||||
|
radBridgeMaskActiveBit1
Specifies the positions of the wild card characters (*)
in the radBridgeMaskPat1 field. |
OctetStringr/w | .1.3.6.1.4.1.164.4.1.3.1.6 |
||||||||
|
radBridgeMaskFrom1
Offset base of radBridgeMaskPat1 within the frame.
Net can be in some cases the data start point. |
Enumerationr/w | .1.3.6.1.4.1.164.4.1.3.1.7 |
||||||||
|
radBridgeMaskOffset1
Specifies the radBridgeMaskPat1 offset within the frame (in bytes) from
the base defined in by radBridgeMaskForm1.The mask offset is an even decimal number in the range of 0 to 1518. |
SNMPv2-SMIInteger32r/w Constraints: range: 4-4Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.3.1.8 |
||||||||
|
radBridgeMaskCond1
Specifies the logical condition of the mask pattern:
true - Condition is valid if at the position specified by radBridgeMaskOffset1 the packet contains data that matches the content of radBridgeMaskPa… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.4.1.3.1.9 |
||||||||
|
radBridgeMaskPat2
Describes the mask field which is either a 16 bit binary pattern,
or four digit hexadecimal pattern. |
OctetStringr/w Constraints: range: 6-6 |
.1.3.6.1.4.1.164.4.1.3.1.10 |
||||||||
|
radBridgeMaskActiveBit2
Specifies the positions of the wild card characters (*)
in the radBridgeMaskPat2 field. |
OctetStringr/w | .1.3.6.1.4.1.164.4.1.3.1.11 |
||||||||
|
radBridgeMaskFrom2
Offset base of radBridgeMaskPat2 within the frame.
Net can be in some cases the data start point. |
Enumerationr/w | .1.3.6.1.4.1.164.4.1.3.1.12 |
||||||||
|
radBridgeMaskOffset2
Specifies the radBridgeMaskPat2 offset within the frame (in bytes) from
the base defined in by radBridgeMaskForm2.The mask offset is an even decimal number in the range of 0 to 1518. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.3.1.13 |
||||||||
|
radBridgeMaskCond2
Specifies the logical condition of the mask pattern:
true - Condition is valid if at the position specified by radBridgeMaskOffset2 the packet contains data that matches the content of radBridgeMaskPa… |
Enumerationr/w | .1.3.6.1.4.1.164.4.1.3.1.14 |
||||||||
|
radBridgeMaskPat3
Describes the mask field which is either a 16 bit binary pattern,
or four digit hexadecimal pattern. |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.4.1.3.1.15 |
||||||||
|
radBridgeMaskActiveBit3
Specifies the positions of the wild card characters (*)
in the radBridgeMaskPat3 field. |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.4.1.3.1.16 |
||||||||
|
radBridgeMaskFrom3
Offset base of radBridgeMaskPat3 within the frame.
Net can be in some cases the data start point. |
Enumerationr/w | .1.3.6.1.4.1.164.4.1.3.1.17 |
||||||||
|
radBridgeMaskOffset3
Specifies the radBridgeMaskPat3 offset within the frame (in bytes) from
the base defined in by radBridgeMaskForm3. The mask offset is an even decimal number in the range of 0 to 1518. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.3.1.18 |
||||||||
|
radBridgeMaskCond3
Specifies the logical condition of the mask pattern:
true - Condition is valid if at the position specified by radBridgeMaskOffset3 the packet contains data that matches the content of radBridgeMaskPa… |
Enumerationr/w | .1.3.6.1.4.1.164.4.1.3.1.19 |
||||||||
|
radBridgeMaskOper
The type of action to be taken if the frame meets the
conditions of the mask. noOp = disabled (mask remains on list, but is not active) delete = mask is removed from the list. |
Enumerationr/w | .1.3.6.1.4.1.164.4.1.3.1.20 |
radBridgeCODParamTable
table.1.3.6.1.4.1.164.4.1.4.1
·
1 row entry
·
8 columns
The table of COD parameters
Each radBridgeCODEntry consists of the following parameters
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
radBridgeCODIfIndex
The interface to which this COD entry is applicable.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.4.1.1.1 |
|
radBridgeCODManualConnect
The management station can start connection manually
by setting this parameter |
Enumerationr/w | .1.3.6.1.4.1.164.4.1.4.1.1.2 |
|
radBridgeCODMode
In answer mode only one incoming call may be accepted at a time. Other nodes
attempting to access the local modem will receive a busy signal until the connection is terminated. (Answer mode has no difficulty supporting … |
Enumerationr/w Constraints: range: 48-48 |
.1.3.6.1.4.1.164.4.1.4.1.1.3 |
|
radBridgeCODConnectDelay
The connect delay defines the minimum time period that
the link must stay disconnected, between 2 succesive connections (in seconds). |
SNMPv2-SMIInteger32r/w Constraints: range: 4-4Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.4.1.1.4 |
|
radBridgeCODisConnectDelay
The disconnect delay defines the minimum time period
the link must stay connected, between 2 succesive disconnections (in seconds). |
SNMPv2-SMIInteger32r/w Constraints: range: 6-6Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.4.1.1.5 |
|
radBridgeCODImplicitSwitch
The inplicit switch allows the user to ignore implicit triggers provided
by the COD software. |
Enumerationr/w | .1.3.6.1.4.1.164.4.1.4.1.1.6 |
|
radBridgeCODNumAccess
The number of successful connections that have been established since
the COD has been reset. |
SNMPv2-SMICounter32 Constraints: range: 1-16Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.1.4.1.1.7 |
|
radBridgeCODTotalConnecTime
The sum of all the connect time intervals since the COD was reset.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.4.1.1.8 |
.1.3.6.1.4.1.164.4.1.4.2
·
1 row entry
·
6 columns
The table of COD parameters
Each radBridgeCODTimeTriggerEntry consists of the following parameters
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
radBridgeCODTimeIfIndex
The interface to which this COD Time Trigger entry is applicable.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.4.2.1.1 |
|
radBridgeCODDay
The day of the week in which the dial up connection operates.
|
Enumeration | .1.3.6.1.4.1.164.4.1.4.2.1.2 |
|
radBridgeCODTimeTriggerNum
Every day of the week the user can configure 3 dial up connections.
|
Integer32 | .1.3.6.1.4.1.164.4.1.4.2.1.3 |
|
radBridgeCODTimeTriggerFrom
Time to start Dial Up connection, in format hh:mm.
|
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.4.1.4.2.1.4 |
|
radBridgeCODTimeTriggerTo
Time to terminate Dial Up connection, in format HH:MM.
|
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.4.1.4.2.1.5 |
|
radBridgeCODTimeTriggerStatus
The status of a table entry.
|
Enumerationr/w | .1.3.6.1.4.1.164.4.1.4.2.1.6 |
radBridgeCODTrafficTable
table.1.3.6.1.4.1.164.4.1.4.3.1
·
1 row entry
·
2 columns
The table of COD Traffic trigger
Each radBridgeCODTrafficEntry consists of the following parameters.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
radBridgeCODProtocolType
The Protocol Type of the Traffic Table
|
Enumeration | .1.3.6.1.4.1.164.4.1.4.3.1.1.1 |
|
radBridgeCODTrafficTriggerStatus
Command of Status of the Protocol Traffic Trigger
|
Enumerationr/w | .1.3.6.1.4.1.164.4.1.4.3.1.1.2 |
radBridgeCODCondTable
table.1.3.6.1.4.1.164.4.1.4.4
·
1 row entry
·
7 columns
The table of COD Condition parameters
Each radBridgeCODCondEntry consists of the following parameters
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
radBridgeCODCondIfIndex
The interface, this COD entry is applicable to.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.4.4.1.1 |
||||||||
|
radBridgeCODOriginateConnectCondition
This condition, allows the user to specify the
condition under which the link is connected. The options are onPowerOn - On power on. whenAnyStationOnLan - When any station on lan. onTraffic - … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.4.1.4.4.1.2 |
||||||||
|
radBridgeCODOriginateDisConnectCondition
This condition allows the user to specify the
condition under which the link is disconnected. The options are: noStationOnLan - When there is no station on lan. Counts 15 minutes from the point … |
Enumerationr/w | .1.3.6.1.4.1.164.4.1.4.4.1.3 |
||||||||
|
radBridgeCODOriginateDisConnectDelay
Delay time in seconds.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.4.4.1.4 |
||||||||
|
radBridgeCODAnswerConnectCondition
CODCondAnswerConnect allows the user to specify
the condition under which the link is connected. The options are: onPowerOn - On power on. whenAnyStationOnLan - When any station on lan. onTraffic … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.4.1.4.4.1.5 |
||||||||
|
radBridgeCODSpecificOnTrafficOIDCondition
A reference to a specific entry in the
radBridgeMaskTable, which describes the particular COD condition . If Connect or Disconnect Conditions are not onTraffic, its value should be set to the OBJECT IDENTIFIER { 0 0 … |
ObjectIdentifier Enumerated Values:
|
.1.3.6.1.4.1.164.4.1.4.4.1.6 |
||||||||
|
radBridgeCODDisConnectMinimunFramesNumber
Frames rate.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.4.4.1.7 |
radBridgeIPXRipTable
table.1.3.6.1.4.1.164.4.1.5.2.6
·
1 row entry
·
9 columns
The routing table used by RIP to calculate routes to remote desination networks.
The routing information for one of this entity's destination networks.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
radBridgeIPXRipDestNetwork
The destination network address to which this entry's
routing information pertains. |
OctetString Enumerated Values:
|
.1.3.6.1.4.1.164.4.1.5.2.6.1.1 |
||||||||||||||||||||||||
|
radBridgeIPXRipPolicy
A value specifying the precidence of the route. A value of
zero means that the route is the best route, a value of one means that the route is the second best route and so on. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.4.1.5.2.6.1.2 |
||||||||||||||||||||||||
|
radBridgeIPXRipForwardingRouter
The IPX node address of the next hop (router) for the
entry's associated destination network. |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.4.1.5.2.6.1.3 |
||||||||||||||||||||||||
|
radBridgeIPXRipNIC
An interface identifier specifying what IPX interface the
next hop can be found on. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.5.2.6.1.4 |
||||||||||||||||||||||||
|
radBridgeIPXRipTickMetric
The metric, in terms of transit time, associated with the route
given by the entry. This time is in terms of 1/18ths of a second. |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.5.2.6.1.5 |
||||||||||||||||||||||||
|
radBridgeIPXRipHopMetric
The metric, in terms of distance , associated with the route
given by the entry. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.5.2.6.1.6 |
||||||||||||||||||||||||
|
radBridgeIPXRipAgingTime
The last time that the entry was updated. The time will be
provided in terms of the MIB-I object sysUpTime. |
RFC1155-SMITimeTicks Enumerated Values:
Textual Convention: RFC1155-SMITimeTicks Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.1.5.2.6.1.7 |
||||||||||||||||||||||||
|
radBridgeIPXRipValueStatus
The entry status value; whether the entry is permanent (added
statically), reachable or unreachable. In the latter two cases it would be added by RIP. A semiDynamic entry is an entry enterd manualy by the user and can … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.4.1.5.2.6.1.8 |
||||||||||||||||||||||||
|
radBridgeIPXRipForwardType
The type of route. Note that local(2) refers to a route for which the
next hop is the final destination; remote(3) refers to a route for which the next hop is not the final destination. |
Enumerationr/w | .1.3.6.1.4.1.164.4.1.5.2.6.1.9 |
radBridgeIPXRipInfTable
table.1.3.6.1.4.1.164.4.1.5.2.7
·
1 row entry
·
3 columns
The RIP interface table.
Each entry corresponds to one ifindex.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
radBridgeIPXRipInfIfIndex
This value of Ifindex is same as radBridgeIPXIfIndex in the
IPX Interface Table. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.5.2.7.1.1 |
|
radBridgeIPXRipInfBcastUpdate
The RIP periodic update interval, in seconds. Zero value
corresponds to infinite interval. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.5.2.7.1.2 |
|
radBridgeIPXRipInfAgeMultiplier
The holding multiplier for information received in RIP
periodic updates. Zero value corresponds to infinite aging time. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.5.2.7.1.3 |
radBridgeIPXSapTable
table.1.3.6.1.4.1.164.4.1.5.3.6
·
1 row entry
·
9 columns
The Server Information table is used by SAP to store information of services which are available on the internetwork.
The server information for one of this entity's server entries.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
radBridgeIPXSapServerType
The type of the server for which this entry pertains.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.5.3.6.1.1 |
|
radBridgeIPXSapName
The name of the server for which this entry pertains.
|
OctetString | .1.3.6.1.4.1.164.4.1.5.3.6.1.2 |
|
radBridgeIPXSapNetwork
The IPX network address of the host on which this server exists.
|
OctetStringr/w | .1.3.6.1.4.1.164.4.1.5.3.6.1.3 |
|
radBridgeIPXSapNode
The IPX node address of the host on which this server exists.
|
OctetStringr/w | .1.3.6.1.4.1.164.4.1.5.3.6.1.4 |
|
radBridgeIPXSapSocket
The IPX socket number that is being used by the server to
which this entry pertains. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.5.3.6.1.5 |
|
radBridgeIPXSapHopsToServer
The number of hops to the entity on which this server exists.
|
Integer32r/w | .1.3.6.1.4.1.164.4.1.5.3.6.1.6 |
|
radBridgeIPXSapNIC
An Network Interface Card identifier specifying what IPX
interface the next hop can be found on. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.5.3.6.1.7 |
|
radBridgeIPXSapAgingTime
The last time that the entry was updated. The time will be
provided in terms of the MIB-I object sysUpTime. |
RFC1155-SMITimeTicks Textual Convention: RFC1155-SMITimeTicks Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.1.5.3.6.1.8 |
|
radBridgeIPXSapStatus
The status of the entry.
|
Enumerationr/w | .1.3.6.1.4.1.164.4.1.5.3.6.1.9 |
radBridgeIPXSapInfTable
table.1.3.6.1.4.1.164.4.1.5.3.7
·
1 row entry
·
3 columns
The Sap interface table.
Each entry corresponds to one ifindex.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
radBridgeIPXSapInfIfIndex
This value of Ifindex is same as radBridgeIPXIfIndex in the
IPX Interface Table. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.5.3.7.1.1 |
|
radBridgeIPXSapInfBcastUpdate
The SAP periodic update interval, in seconds. Zero value
corresponds to infinite interval. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.5.3.7.1.2 |
|
radBridgeIPXSapInfAgeMultiplier
The holding multiplier for information received in SAP
periodic updates. Zero value corresponds to infinite aging time. |
SNMPv2-SMIInteger32r/w Constraints: range: 1-96Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.5.3.7.1.3 |
maskingTable
table.1.3.6.1.4.1.164.4.1.6.3
·
1 row entry
·
24 columns
This is the new masking scheme. Mask tables enable definition of forwarding restrictions and control of message flow in the internetwork. Each entry in this table defines a mask statement and an action defined by maskingOperation.
Defines the contents of each line in the mask table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
maskingType
Defines the type of mask entry.
|
Enumeration | .1.3.6.1.4.1.164.4.1.6.3.1.1 |
||||||
|
maskingIfIndex
Specifies the ifIndex of the interface to which the mask is applied.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.6.3.1.2 |
||||||
|
maskingIndex
An index to the masking table. This number should not be greater than maskingMaxEntries
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.6.3.1.3 |
||||||
|
maskingProtocolType
The base protocol for masking. IPX, IP, others.
|
Enumerationr/w | .1.3.6.1.4.1.164.4.1.6.3.1.4 |
||||||
|
maskingSmartMaskOID
A reference to a specific Smart mask table (old radBridgeMaskTable)
which enables a more specific mask type. If this information is not available, its value should be set to the OBJECT IDENTIFIER { 0 0 }. |
ObjectIdentifier | .1.3.6.1.4.1.164.4.1.6.3.1.5 |
||||||
|
maskingFrameType
Enables the user to decide about frame type
* all frame * just broadcast * just multicast. |
Enumerationr/w | .1.3.6.1.4.1.164.4.1.6.3.1.6 |
||||||
|
maskingFrameTypeCondition
Specifies the logical condition of the mask pattern:
true - Condition is valid if at the position specified by maskingFrameType the packet contains data that matches the content of maskingFrameType.… |
Enumerationr/w | .1.3.6.1.4.1.164.4.1.6.3.1.7 |
||||||
|
maskingSourceAddress
The source address is according to the maskingMacOrNet and
maskingProtocolType variables. In case of 'MAC' enter 6 bytes (48 bit) of source address. In case of 'NET' if the maskingProtocolType is IP, this is t… |
GenAddressr/w Textual Convention: ACE2002-MIBGenAddress OctetStringType Constraints: range: 12 |
.1.3.6.1.4.1.164.4.1.6.3.1.8 |
||||||
|
maskingSourceActiveBits
Specifies the positions of the wild card characters (*)
in the maskingSourceAddress field. Only the 1's bit will be taken in considerations. |
GenAddressr/w Textual Convention: ACE2002-MIBGenAddress OctetStringType Constraints: range: 12 |
.1.3.6.1.4.1.164.4.1.6.3.1.9 |
||||||
|
maskingSourceMacOrNet
The variable maskingSourceAddress and maskingSourceActiveBits
will be treated as MAC, or NET address. - If maskingProtocolType = 'all', 'sna', 'netbios', dec or 'unknown', the maskingSourceMacOrNet can be macAddress… |
Enumerationr/w | .1.3.6.1.4.1.164.4.1.6.3.1.10 |
||||||
|
maskingSourceCondition
Specifies the logical condition of the mask pattern:
true - Condition is valid if at the position specified by maskingSourceAddress (in conjunction with maskingSourceActiveBits) the … |
Enumerationr/w | .1.3.6.1.4.1.164.4.1.6.3.1.11 |
||||||
|
maskingDestAddress
If maskingFrameType = broadcast or multicast, this object
is NOT APPLICABLE. If maskingFrameType = all or unknown, this object is applicable. The destination address is according to the maskingMacOrNet and maskingProto… |
GenAddressr/w Textual Convention: ACE2002-MIBGenAddress OctetStringType Constraints: range: 12 |
.1.3.6.1.4.1.164.4.1.6.3.1.12 |
||||||
|
maskingDestActiveBits
If maskingFrameType = broadcast or multicast, this object
is NOT APPLICABLE. If maskingFrameType = all or unknown, this object is applicable. Specifies the positions of the wild card characters (*) in the maskingDe… |
GenAddressr/w Textual Convention: ACE2002-MIBGenAddress OctetStringType Constraints: range: 12 |
.1.3.6.1.4.1.164.4.1.6.3.1.13 |
||||||
|
maskingDestMacOrNet
If maskingFrameType = broadcast or multicast, this object
is NOT APPLICABLE. If maskingFrameType = all or unknown, this object is applicable. - If maskingProtocolType = 'all', 'sna', 'netbios', dec or 'unknown', the… |
Enumerationr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.4.1.6.3.1.14 |
||||||
|
maskingDestCondition
If maskingFrameType = broadcast or multicast, this object
is NOT APPLICABLE. If maskingFrameType = all or unknown, this object is applicable. Specifies the logical condition of the mask pattern: true - … |
Enumerationr/w | .1.3.6.1.4.1.164.4.1.6.3.1.15 |
||||||
|
maskingLowLevelProt
This field is set in conjunction with the maskingProtocolType variable.
This variable specifies the low level protocol. The IPX socket entered in maskingDestAddress has priority over the value of maskingLowLevelProt, w… |
Enumerationr/w Constraints: range: 0-32 |
.1.3.6.1.4.1.164.4.1.6.3.1.16 |
||||||
|
maskingLowLevelProtCondition
Specifies the logical condition of the mask pattern:
true - Condition is valid if at the position specified by maskingLowLevelProt the packet contains data that matches the content of maskingLowLeve… |
Enumerationr/w | .1.3.6.1.4.1.164.4.1.6.3.1.17 |
||||||
|
maskingHighLevelProt
This field is set in connection to the maskingProtocolType variable.
This variable specifies the high level protocols (application). As for today it supports just IP protocol stack. The object's value is a sum of the fo… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.6.3.1.18 |
||||||
|
maskingHighLevelProtCondition
Specifies the logical condition of the mask pattern:
true - Condition is valid if at the position specified by maskingHighLevelProt the packet contains data that matches the content of maskingHi… |
Enumerationr/w | .1.3.6.1.4.1.164.4.1.6.3.1.19 |
||||||
|
maskingPortNum
The port number is the same as in high level protocol. It
specifies the dest. port in IP case or the dest. socket in case of IPX & apple protocols. IP - This object is applicable only if none (0) value was selecte… |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.6.3.1.20 |
||||||
|
maskingPortNumCondition
Specifies the logical condition of the mask pattern:
true - Condition is valid if at the position specified by maskingPortNum the packet contains data that matches the content of maskingPortNum.… |
Enumerationr/w | .1.3.6.1.4.1.164.4.1.6.3.1.21 |
||||||
|
maskingOperation
The type of action to be taken if the frame meets the
conditions of the mask. noOp = disabled (mask remains on list, but is not active) delete = mask is removed from the list. smartMask = the operation and desti… |
Enumerationr/w | .1.3.6.1.4.1.164.4.1.6.3.1.22 |
||||||
|
maskingSrcPortNum
The source port number.
For IP: No Condition. For IPX: This object is applicable only if the socket entered in maskingSourceAddress is don't care (00) and maskingLowLevelProt is NOT ipxRip or ipxS… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.6.3.1.23 |
||||||
|
maskingSrcPortNumCondition
The same as 'maskingPortNumCondition'.
Relates to source port. |
Enumerationr/w | .1.3.6.1.4.1.164.4.1.6.3.1.24 |
radBridgeCurrentTable
table.1.3.6.1.4.1.164.4.1.7.1
·
1 row entry
·
14 columns
The RAD Bridge Current table.
An entry in the RAD Bridge Current table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
radBridgeCurrentIndex
The index of the Bridge interface or Bridge Port.
It may be ifIndex. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.7.1.1.1 |
||||||||||||||||||||||||||||||||
|
radBridgeCurrentIngressFilteringDiscardedFrames
The counter associated with the number of Discarded
Frames upon Ingress Filtering, encountered by a Bridge interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.1.7.1.1.2 |
||||||||||||||||||||||||||||||||
|
radBridgeCurrentFrameTypeDiscardedFrames
The counter associated with the number of Discarded
Frames upon Frame Type and Tagging Mismatch, encountered by a Bridge interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Constraints: range: 1-2147483647Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.1.7.1.1.3 |
||||||||||||||||||||||||||||||||
|
radBridgeCurrentRxCorrectFrames
The counter associated with the number of Received Correct Frames,
encountered by a Bridge Port in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.1.7.1.1.4 |
||||||||||||||||||||||||||||||||
|
radBridgeCurrentRxCorrectBytes
The counter associated with the number of Received Correct Bytes,
encountered by a Bridge Port in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.1.7.1.1.5 |
||||||||||||||||||||||||||||||||
|
radBridgeCurrentRxCorrectBytesHCOverflow
The counter associated with the number of times the associated
radBridgeCurrentRxCorrectBytes counter has overflowed. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.1.7.1.1.6 |
||||||||||||||||||||||||||||||||
|
radBridgeCurrentRxBcastFrames
The counter associated with the number of Received Broadcast Frames,
encountered by a Bridge Port in the current 15 minute interval. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.1.7.1.1.7 |
||||||||||||||||||||||||||||||||
|
radBridgeCurrentRxMcastFrames
The counter associated with the number of Received Multicast Frames,
encountered by a Bridge Port in the current 15 minute interval. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.1.7.1.1.8 |
||||||||||||||||||||||||||||||||
|
radBridgeCurrentTxCorrectFrames
The counter associated with the number of Transmitted Correct Frames,
encountered by a Bridge Port in the current 15 minute interval. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.1.7.1.1.9 |
||||||||||||||||||||||||||||||||
|
radBridgeCurrentTxCorrectBytes
The counter associated with the number of Transmitted Correct Bytes,
encountered by a Bridge Port in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.1.7.1.1.10 |
||||||||||||||||||||||||||||||||
|
radBridgeCurrentTxCorrectBytesHCOverflow
The counter associated with the number of times the associated
radBridgeCurrentTxCorrectBytes counter has overflowed. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.1.7.1.1.11 |
||||||||||||||||||||||||||||||||
|
radBridgeCurrentTxBcastFrames
The counter associated with the number of Transmitted Broadcast Frames,
encountered by a Bridge Port in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.1.7.1.1.12 |
||||||||||||||||||||||||||||||||
|
radBridgeCurrentTxMcastFrames
The counter associated with the number of Transmitted Multicast Frames,
encountered by a Bridge Port in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.1.7.1.1.13 |
||||||||||||||||||||||||||||||||
|
radBridgeCurrentTxDropFrames
The counter associated with the number of Transmitted Dropped Frames,
encountered by a Bridge Port in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.1.7.1.1.14 |
radBridgeIntervalTable
table.1.3.6.1.4.1.164.4.1.7.2
·
1 row entry
·
15 columns
The RAD Bridge Interval table.
An entry in the RAD Bridge Interval table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
radBridgeIntervalIndex
The index of the bridge interface or Bridge Port.
It may be ifIndex. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.7.2.1.1 |
||||||||
|
radBridgeIntervalNumber
A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals exist). |
Integer32 | .1.3.6.1.4.1.164.4.1.7.2.1.2 |
||||||||
|
radBridgeIntervalIngressFilteringDiscardedFrames
The counter associated with the number of Discarded
Frames upon Ingress Filtering, encountered by a Bridge interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.1.7.2.1.3 |
||||||||
|
radBridgeIntervalFrameTypeDiscardedFrames
The counter associated with the number of Discarded
Frames upon Frame Type and Tagging Mismatch, encountered by a Bridge interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.1.7.2.1.4 |
||||||||
|
radBridgeIntervalRxCorrectFrames
The counter associated with the number of Received Correct Frames,
encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.1.7.2.1.5 |
||||||||
|
radBridgeIntervalRxCorrectBytes
The counter associated with the number of Received Correct Bytes,
encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.1.7.2.1.6 |
||||||||
|
radBridgeIntervalRxCorrectBytesHCOverflow
The counter associated with the number of times the associated
radBridgeIntervalRxCorrectBytes counter has overflowed. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.1.7.2.1.7 |
||||||||
|
radBridgeIntervalRxBcastFrames
The counter associated with the number of Received Broadcast Frames,
encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.1.7.2.1.8 |
||||||||
|
radBridgeIntervalRxMcastFrames
The counter associated with the number of Received Multicast Frames,
encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.1.7.2.1.9 |
||||||||
|
radBridgeIntervalTxCorrectFrames
The counter associated with the number of Transmitted Correct Frames,
encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.1.7.2.1.10 |
||||||||
|
radBridgeIntervalTxCorrectBytes
The counter associated with the number of Transmitted Correct Bytes,
encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.1.7.2.1.11 |
||||||||
|
radBridgeIntervalTxCorrectBytesHCOverflow
The counter associated with the number of times the associated
radBridgeIntervalTxCorrectBytes counter has overflowed. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.1.7.2.1.12 |
||||||||
|
radBridgeIntervalTxBcastFrames
The counter associated with the number of Transmitted Broadcast Frames,
encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.1.7.2.1.13 |
||||||||
|
radBridgeIntervalTxMcastFrames
The counter associated with the number of Transmitted Multicast Frames,
encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.1.7.2.1.14 |
||||||||
|
radBridgeIntervalTxDropFrames
The counter associated with the number of Transmitted Dropped Frames,
encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Constraints: range: 1-255Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.1.7.2.1.15 |
.1.3.6.1.4.1.164.4.1.8.1
·
1 row entry
·
7 columns
A table containing static configuration information for each VLAN configured into the device by management. All entries are permanent and will be restored after the device is reset.
Static information for a VLAN configured into the
device by (local or network) management.
device by (local or network) management.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
radBridgePortBaseVlanCnfgIdx
This object indicates the Idx of the Agent Cnfg the following
objects refer. 255=Temporary Cnfg (when relevant, Set is done only to this configuration). For Agents that support only one configuration, this object wil… |
Integer32 Constraints: range: 10-1000000 |
.1.3.6.1.4.1.164.4.1.8.1.1.1 |
||||||||||||
|
radBridgePortBaseVlanIdx
Index of the port based VLAN.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.8.1.1.2 |
||||||||||||
|
radBridgePortBaseVlanName
An administratively assigned string, which may be used
to identify the the port based VLAN. |
OctetStringr/w | .1.3.6.1.4.1.164.4.1.8.1.1.3 |
||||||||||||
|
radBridgePortBaseVlanEgressPorts
The set of ports which are permanently assigned to the
egress list for this port based VLAN by management. The default value of this object is a string of zeros. |
Q-BRIDGE-MIBPortListr/w Enumerated Values:
Textual Convention: Q-BRIDGE-MIBPortList OctetString |
.1.3.6.1.4.1.164.4.1.8.1.1.4 |
||||||||||||
|
radBridgePortBaseVlanVirtualGroups
The set of Virtual Groups which are permanently assigned to
this port based VLAN by management. (read Virtual Group instead of port in PortList Textual Convention) The default value of this object is a string of zeros. |
Q-BRIDGE-MIBPortListr/w Textual Convention: Q-BRIDGE-MIBPortList OctetString |
.1.3.6.1.4.1.164.4.1.8.1.1.5 |
||||||||||||
|
radBridgePortBaseVlanRowStatus
This object enable user to
create/delete entries in this table. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.4.1.8.1.1.6 |
||||||||||||
|
radBridgePortBaseVlanMng
This object allows user to enable/disable
management traffic on this VLAN. disable - only non-management data is allowed. enable - mixture of management traffic 0with other types of data is allowed. |
Enumerationr/w | .1.3.6.1.4.1.164.4.1.8.1.1.7 |
.1.3.6.1.4.1.164.4.1.8.2
·
1 row entry
·
4 columns
The Bridge Ports-VLAN Membership table. This table enables the user to assign: - Several VLANs to a Port. - Several Ports to a VLAN.
An entry in the Bridge Ports-VLANs Memebership table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
radBridgePortVlanMemberBridgeIdx
This object indicates the Bridge Index.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.8.2.1.1 |
||||||||||||
|
radBridgePortVlanMemberPortIdx
This object indicates the Bridge's Port Index.
For some cases, it can be used as the Port ofIndex. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.8.2.1.2 |
||||||||||||
|
radBridgePortVlanMemberVlanId
This object indicates the VLAN ID.
|
SNMPv2-SMIInteger32 Constraints: range: 1-255Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.8.2.1.3 |
||||||||||||
|
radBridgePortVlanMemberRowStatus
This object enables the user to
create/delete entries in this table. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.4.1.8.2.1.4 |
radBridgeGenFlowTable
table.1.3.6.1.4.1.164.4.1.9.1
·
1 row entry
·
10 columns
A table containing static configuration information for Bridge configured into the device by (local or network) management. All entries are permanent and will be restored after the device is reset.
Static information for a Bridge configured into the
device by management.
device by management.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
radBridgeGenFlowCnfgIdx
This object indicates the Idx of the
Agent Cnfg the following objects refer. 255=Temporary Cnfg (when relevant Set is done only to this configuration). For Agents that support only one configuration, this object will… |
Integer32 Constraints: range: 100-1000 |
.1.3.6.1.4.1.164.4.1.9.1.1.1 |
||||||||||||||||||
|
radBridgeGenFlowIdx
For Agent having more than one bridge,
this index may be used as bridge index |
SNMPv2-SMIInteger32 Constraints: range: 0-65535Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.9.1.1.2 |
||||||||||||||||||
|
radBridgeGenFlowRowStatus
This object enable user to
create/delete entries in this table. |
SNMPv2-TCRowStatusr/w Enumerated Values:
Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.4.1.9.1.1.3 |
||||||||||||||||||
|
radBridgeGenFlowFloodOrBcastMaxRate
This object controls maximum Flooding or Broadcast Rate:
Max number of multicast along with unknown or flooded unicast frames allowed to enter any port. The number can be presented either as percentage of bandwidth, … |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.9.1.1.4 |
||||||||||||||||||
|
radBridgeGenFlowQosMode
This object controls Quality of Service mode.
User may select which field(s) (in case of fields - which one has precedence) will affect prioritization of data between egress queues. |
Enumerationr/w | .1.3.6.1.4.1.164.4.1.9.1.1.5 |
||||||||||||||||||
|
radBridgeGenFlowSchedulingMode
This object controls which scheduling mode is used:
Weighted Fair Queuing (WFQ) scheme, Strict Priority (SP) or ATM CoS |
Enumerationr/w | .1.3.6.1.4.1.164.4.1.9.1.1.6 |
||||||||||||||||||
|
radBridgeGenFlowBasicClassification
This object defines whether Classification based on Port should be
taken into account (either as default, or in addition to other classifications). |
Enumerationr/w | .1.3.6.1.4.1.164.4.1.9.1.1.7 |
||||||||||||||||||
|
radBridgeGenFlowMulticastTrafficClass
The Traffic Class the received Multicast frame is mapped to.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.9.1.1.8 |
||||||||||||||||||
|
radBridgeGenFlowBroadcastTrafficClass
The Traffic Class the received Broadcast frame is mapped to.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.9.1.1.9 |
||||||||||||||||||
|
radBridgeGenFlowUnkownUnicastTrafficClass
The Traffic Class the received
Unkonwn Unicast frame is mapped to. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.9.1.1.10 |
.1.3.6.1.4.1.164.4.1.9.2
·
1 row entry
·
3 columns
A table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and will be restored after the device is reset.
Static information for a VLAN configured into the
device by (local or network) management.
device by (local or network) management.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
radBridgeDot1qVlanTaggedPorts
The set of ports which should transmit egress packets
for this VLAN as tagged. |
Q-BRIDGE-MIBPortListr/w Textual Convention: Q-BRIDGE-MIBPortList OctetString |
.1.3.6.1.4.1.164.4.1.9.2.1.1 |
|
radBridgeDot1qVlanUnmodifiedPorts
The set of ports which should transmit egress packets
for this VLAN as unmodified. |
Q-BRIDGE-MIBPortListr/w Textual Convention: Q-BRIDGE-MIBPortList OctetString |
.1.3.6.1.4.1.164.4.1.9.2.1.2 |
|
radBridgeDot1qVlanSplitHorizon
When 'enable (3)', packets having this VLAN will
not be switched back to other bridge ports which are members of this VLAN. |
Enumerationr/w | .1.3.6.1.4.1.164.4.1.9.2.1.3 |
radDot1qPortVlanTable
table.1.3.6.1.4.1.164.4.1.9.3
·
1 row entry
·
9 columns
A table containing control and status information for VLAN configuration per port.
Information controlling VLAN configuration for a port.
This is indexed by dot1dBasePort.
This is indexed by dot1dBasePort.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
radDot1qPortStacking
This object indicates the port stacking operation:
unmodify (2) = Do not add Tag. tag (3) = Add Tag to Untagged Frames. stack (4) = Add Tag to all Frames. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.4.1.9.3.1.1 |
||||
|
radDot1qPortCopyOriginVlanPriority
This object indicates whether use the original VLAN Priority of the frame,
as the priority of the VLAN added by this port. |
Enumerationr/w | .1.3.6.1.4.1.164.4.1.9.3.1.2 |
||||
|
radDot1qPortDefaultVlanPriority
Default VLAN Frame priority of the VLAN added by this port.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.9.3.1.3 |
||||
|
radDot1qPortTagStripping
This object indicates whether remove a tag from the frame on this port,
frame with double tag will remain with one tag and frame with one tag will remain untagged. |
Enumerationr/w | .1.3.6.1.4.1.164.4.1.9.3.1.4 |
||||
|
radDot1qPortEgressTagHandling
This object indicates how is the Egress VLAN Tag processed.
It is mainly for use with Double Tagging. |
Enumerationr/w | .1.3.6.1.4.1.164.4.1.9.3.1.5 |
||||
|
radDot1qPortIngressTagHandling
This object indicates how is the Ingress VLAN Tag processed.
It is mainly for use with Double Tagging. |
Enumerationr/w | .1.3.6.1.4.1.164.4.1.9.3.1.6 |
||||
|
radDot1qPortReplaceVlanPriority
This object indicates whether for each received tagged frame on this Bridge Port -
VLAN Priority will be replaced by another Priority. no(2) = no repacement yes(3) = VLAN Priority will be replaced Fo… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.4.1.9.3.1.7 |
||||
|
radDot1qPortVlanEthType
This object indicates the Ethernet Type.
For some devices, it is applicable only when radDot1qPortStacking = stack. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.1.9.3.1.8 |
||||
|
radDot1qPortVlanCnodeLevel1Agent
Specify if a Level 1 cNode agent is enabled or not for the bridge port.
|
Enumerationr/w | .1.3.6.1.4.1.164.4.1.9.3.1.9 |
radBridgeGenCfgTable
table.1.3.6.1.4.1.164.4.1.9.4
·
1 row entry
·
8 columns
A table containing Bridge configuration parameters.
Describes an entry in the radBridgeGenCfgTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
radBridgeGenCfgIdx
This object indicates the Idx of the
Agent Cnfg the following objects refer. 255=Temporary Cnfg. For Agents that support only one Configuration, this object will be constant=1. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.4.1.9.4.1.1 |
||||||||||||||||||||
|
radBridgeGenCfgIdx2
For Agents having more than one bridge,
this index may be used as bridge index |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.9.4.1.2 |
||||||||||||||||||||
|
radBridgeGenCfgBridgeAction
This variable enables the operator to perform one of the
specified actions on the tables maintained by the Bridge. After performing the action, Agent will automatically Set the value of this variable to noOp(255). |
Enumerationr/w | .1.3.6.1.4.1.164.4.1.9.4.1.3 |
||||||||||||||||||||
|
radBridgeAgingTimeSec
This variable duplicates scalar object
dot1dTpAgingTimeThe of BRIDGE-MIB with configuration index and Bridge index. It defines the timeout period in seconds for aging out dynamically learned forwardi… |
Integer32r/w | .1.3.6.1.4.1.164.4.1.9.4.1.4 |
||||||||||||||||||||
|
radBridgeMngVlanId
This variable indicates the VLAN ID
used for remote management traffic. 0 = Not Applicable. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.1.9.4.1.5 |
||||||||||||||||||||
|
radBridgeLoopDetectVlanId
This variable indicates the VLAN ID used for Loop Detection packets.
Valid values: 1 - 4095: VLAN ID 0 - Means that the Loop Detection is Disabled. |
SNMPv2-SMIUnsigned32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.1.9.4.1.6 |
||||||||||||||||||||
|
radBridgeSplitHorizon
This object configure 'split horizon' switching between bridge Ports.
- disable - normal (VLAN aware) bridge behavior. - enable - all packets, regardless their VLAN, coming from user side are blocked from being switch… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.4.1.9.4.1.7 |
||||||||||||||||||||
|
radBridgeEthType
Value of Ethertype field in Ethernet frame.
This field indicates which protocol is being transported in an ethernet frame. |
SNMPv2-SMIUnsigned32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.1.9.4.1.8 |
.1.3.6.1.4.1.164.4.1.10.1
·
1 row entry
·
2 columns
An inversed table to dot1dBasePortTable from RFC1493 with reduced information. This table index is known to the NMS and this way the needed information can be received by just one Get command, instead of searching the entire dot1dBasePortTable (where it is an attribute).
The bridge port number for each bridge port
interface index.
interface index.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
radBridgeInvBasePortIfIndex
The value of the instance of the ifIndex object,
defined in MIB-II, for the interface corresponding to this Bridge port. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.10.1.1.1 |
||||
|
radBridgeInvBasePort
The Bridge port number.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.10.1.1.2 |
radBridgeStpCnfgTable
table.1.3.6.1.4.1.164.4.1.11.1
·
1 row entry
·
7 columns
STP Configuration table. STP=Spanning Tree Protocol. It includes STP configurable parameters that in BRIDGE-MIB are scalars, while we need them per card/bridge/interface and per different configurations.
An entry in the radBridgeStpCnfgTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
radBridgeStpCnfgIdx1
This object indicates the Index of the Agent Configuration
the following objects refer to. For Agents that support more than one configuration: 255=Temporary Cnfg ; Set can be done only to this configuration. For A… |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.4.1.11.1.1.1 |
||||||||||||||||||
|
radBridgeStpCnfgIdx2
For Agents having the table objects per Card/Bridge/Interface
this will be the index of the Card/Bridge/Interface used. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.11.1.1.2 |
||||||||||||||||||
|
radBridgeStpCnfgForwardDelay
The value that the bridge of radBridgeStpCnfgIdx2 uses for
Forward Delay when this bridge is acting as the root. Note that the range for this parameter is related to the value of radBridgeStpCnfgMaxAge (according to 8… |
Integer32r/w | .1.3.6.1.4.1.164.4.1.11.1.1.3 |
||||||||||||||||||
|
radBridgeStpCnfgMaxAge
The value that the bridge of radBridgeStpCnfgIdx2 uses for
MaxAge when this bridge is acting as the root. Note that the range for this parameter is related to the value of radBridgeStpCnfgHelloTime (according to 802.1… |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.4.1.11.1.1.4 |
||||||||||||||||||
|
radBridgeStpCnfgHelloTime
The value that the bridge of radBridgeStpCnfgIdx2 uses for
Hello Time when this bridge is acting as the root. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue … |
Integer32r/w | .1.3.6.1.4.1.164.4.1.11.1.1.5 |
||||||||||||||||||
|
radBridgeStpCnfgPriority
The value of the write-able portion of the Bridge ID, i.e., the first
two octets of the (8 octet long) Bridge ID, per radBridgeStpCnfgIdx2 instance. |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.4.1.11.1.1.6 |
||||||||||||||||||
|
radBridgeStpCnfgStpVersion
This object determines the STP version used:
stp - usual Spanning Tree Protocol. rstp - Rapid Spanning Tree Protocol. |
Enumerationr/w | .1.3.6.1.4.1.164.4.1.11.1.1.7 |
radBridgeStpStatTable
table.1.3.6.1.4.1.164.4.1.11.2
·
1 row entry
·
6 columns
STP Status table. STP=Spanning Tree Protocol. It includes STP status parameters that in BRIDGE-MIB are scalars, while we need them per card/bridge/interface. For devices that have several configurations, this table is for Status of the Active configuration.
An entry in the radBridgeStpStatTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
radBridgeStpStatIdx
For Agents having the table objects per Card/Bridge/Interface
this will be the index of the Card/Bridge/Interface used. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.11.2.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
radBridgeStpStatForwardDelay
This time value, measured in units of hundredths of a second,
controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the … |
BRIDGE-MIBTimeout Textual Convention: BRIDGE-MIBTimeout Integer32 |
.1.3.6.1.4.1.164.4.1.11.2.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
radBridgeStpStatMaxAge
The maximum age of Spanning Tree Protocol information learned
from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using. |
BRIDGE-MIBTimeout Enumerated Values:
Textual Convention: BRIDGE-MIBTimeout Integer32 |
.1.3.6.1.4.1.164.4.1.11.2.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
radBridgeStpStatHelloTime
The amount of time between the transmission of Configuration
bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actua… |
BRIDGE-MIBTimeout Enumerated Values:
Textual Convention: BRIDGE-MIBTimeout Integer32 |
.1.3.6.1.4.1.164.4.1.11.2.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
radBridgeStpStatDesignatedRoot
The bridge identifier of the root of the spanning tree as determined
by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs origin… |
BRIDGE-MIBBridgeId Textual Convention: BRIDGE-MIBBridgeId OctetStringType Constraints: range: 8 |
.1.3.6.1.4.1.164.4.1.11.2.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
radBridgeStpStatRootCost
The cost of the path to the root as seen from this bridge.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.11.2.1.6 |
radBridgePortCnfgTable
table.1.3.6.1.4.1.164.4.1.13.1
·
1 row entry
·
12 columns
The Bridge Port Configuration Table.
An entry in the table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
radBridgePortCnfgIdx
The first index of the table.
It can serve for Configuration index, Bridge index or other. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.13.1.1.1 |
||||
|
radBridgePortCnfgPrtIdx
This object indicates the Bridge Port index.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.13.1.1.2 |
||||
|
radBridgePortCnfgMaxMacAddr
This object indicates the maximum number of total MAC Addresses
(static and learned) supported by this Bridge Port. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.13.1.1.3 |
||||
|
radBridgePortCnfgMngFlow
This object indicates whether this Bridge Port
is dedicated for management flow. |
Enumerationr/w | .1.3.6.1.4.1.164.4.1.13.1.1.4 |
||||
|
radBridgePortCnfgMcastMode
This object indicates this Bridge Port's Multicast Mode:
flooding (1) - flood multicast MAC addresses forwarding (2) - forward multicast MAC addresses to the subnet indicated. |
Enumerationr/w | .1.3.6.1.4.1.164.4.1.13.1.1.5 |
||||
|
radBridgePortCnfgDefaultVpi
This object indicates the VPI of this Bridge Port's Default VCL.
An incoming frame with priority that is not assigned to any VCL will be transferred to the Default VCL. |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.13.1.1.6 |
||||
|
radBridgePortCnfgDefaultVci
This object indicates the VCI of this Bridge Port's Default VCL.
An incoming frame with priority that is not assigned to any VCL will be transferred to the Default VCL. |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.13.1.1.7 |
||||
|
radBridgePortCnfgStatVlanId
This object indicates the selected VlanId of the bridge port
on which statistics are being collected. 0=no Statistics collected for VLAN on this bridge port. |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.13.1.1.8 |
||||
|
radBridgePortCnfgIngressMtu
The size of the largest packet which can be received
on the interface, specified in octets. |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.13.1.1.9 |
||||
|
radBridgePortCnfgEgressMtu
The size of the largest packet which can be sent
on the interface, specified in octets. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.13.1.1.10 |
||||
|
radBridgePortCnfgDot1x
This feature is currently supported via the variable ethIfTable.ethDot1xEnable.
Determnines if the Port-Based Network Access Protocol (IEEE-802.1x)is enabled for the bridge Port. |
Enumerationr/w | .1.3.6.1.4.1.164.4.1.13.1.1.11 |
||||
|
radBridgePortCnfgMappingProfile
This attribute defines the Queue Mapping Profile ID(cosProfileTable) assigned
to this Bridge Port. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.1.13.1.1.12 |
lanrangerBootPTable
table.1.3.6.1.4.1.164.4.2.1.6.4.4
·
1 row entry
·
3 columns
A list of BootP entries. The number of entries is up to BootP current entries, according to the LANRANger model.
BootP parameters per entry of the BootP table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
lanrangerBootPIpAddress
BootP Ip Address.
|
RFC1155-SMIIpAddress Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.4.2.1.6.4.4.1.1 |
||||
|
lanrangerBootPIfIndex
The number is the same as the ifIndex of the link.
|
Enumeration | .1.3.6.1.4.1.164.4.2.1.6.4.4.1.2 |
||||
|
lanrangerBootPOperation
This object indicates the status of this entry.
active(1) - this entry is currently in use and will remain so even after the next reset of the LANRANger. delete(2) - writing this value to the obj… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.4.2.1.6.4.4.1.3 |
lanrangerLinkTable
table.1.3.6.1.4.1.164.4.2.2.1
·
1 row entry
·
16 columns
A list of link entries. The number of entries is up to 8, according to the LANRANger model.
LANRANger-specific parameter values for a link.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
lanrangerLinkIndex
A unique value for each link, equal to the value of ifIndex.
The value for each link must remain constant at least from one re-initialization of the network management agent to the next. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.2.2.1.1.1 |
||||||||||||
|
lanrangerLinkType
The link type .
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.4.2.2.1.1.2 |
||||||||||||
|
lanrangerLinkState
The link is disabled, enabled or backup.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.4.2.2.1.1.3 |
||||||||||||
|
lanrangerLinkDTRMode
The link DTR mode.
|
Enumeration | .1.3.6.1.4.1.164.4.2.2.1.1.4 |
||||||||||||
|
lanrangerLinkStatus
The link physical status .
|
Enumeration | .1.3.6.1.4.1.164.4.2.2.1.1.5 |
||||||||||||
|
lanrangerLinkConnectionStatus
The link connection status.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.4.2.2.1.1.6 |
||||||||||||
|
lanrangerLinkNumOfLogLinks
The number of logical links on this physical link.
0 = noLogicalLink |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.2.2.1.1.7 |
||||||||||||
|
lanrangerLinkReset
Setting this attribute to ON will reset the link . Upon completion the value will be set to OFF
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.4.2.2.1.1.8 |
||||||||||||
|
lanrangerLinkRxMaskedFrames
The number of masked frames received on this physical link.
|
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.2.2.1.1.9 |
||||||||||||
|
lanrangerLinkLayer2Type
The link layer 2 type indicates whether the link is Bridge
or Router and specifies the Router's type. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.4.2.2.1.1.10 |
||||||||||||
|
lanrangerLinkLayer3Type
The link layer 3 type indicates the protocol type.
|
Enumerationr/w Constraints: range: 0-36 |
.1.3.6.1.4.1.164.4.2.2.1.1.11 |
||||||||||||
|
lanrangerBackupLink
The backup link interface index located in the two LSB bytes.
If the link is FR type, the two MSB will contain a DLCi number. For other link types the two MSB will equal to 0. |
SNMPv2-SMIInteger32r/w Constraints: range: 0-36Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.2.2.1.1.12 |
||||||||||||
|
wrWanThrottle
Throttle controls the baud rate of the WAN.
For example if we have a WAN rate of 2M but we want only 1/2 M as the baud rate we set the Wan Throttle to 512k. These are the values: Full (2), 1M (3), 512k (… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.2.2.1.1.13 |
||||||||||||
|
wrIpTransparentMode
This parameter shows whether the IP Transparent mode is enabled.
When this mode is enabled, all frames (including broadcast and multicast frames) are forwarded from E1/T1 to LAN and from LAN to E1/T1. |
Enumerationr/w | .1.3.6.1.4.1.164.4.2.2.1.1.14 |
||||||||||||
|
wrIpTransparentGateway
The gateway used for transparent IP.
|
RFC1155-SMIIpAddressr/w Enumerated Values:
Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.4.2.2.1.1.15 |
||||||||||||
|
lanrangerLinkProtocolType
This parameter indicates the routing protocol running on this Interface.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.4.2.2.1.1.16 |
lanrangerLinkConnTable
table.1.3.6.1.4.1.164.4.2.2.2.3
·
1 row entry
·
9 columns
A list of Connection entries. The number of entries is up to Max entries, according to the LANRANger model.
Information about LANRANger Connection.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
lanrangerLinkConnPhysLink
The lanrangerLinkIndex for the physical link with which this logical link is associated.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.2.2.2.3.1.1 |
||||||
|
lanrangerLinkConnAid
A unique value for each logical link. The maximum number
of logical links is 256, according to the LANRANger model. The value for each logical link must remain constant at least from one re-initialization of the ne… |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.2.2.2.3.1.2 |
||||||
|
lanrangerLinkConnMacAddr
The MAC address of the device that the logical link is connected to
on the remote LAN. |
MacAddress Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.4.2.2.2.3.1.3 |
||||||
|
lanrangerLinkConnStatus
The link connection status.
|
Enumeration | .1.3.6.1.4.1.164.4.2.2.2.3.1.4 |
||||||
|
lanrangerLinkConnDeviceType
The type of device that the logical link is connected to on the remote LAN.
|
Enumeration | .1.3.6.1.4.1.164.4.2.2.2.3.1.5 |
||||||
|
lanrangerLinkConnDeviceName
The logical name of the device that the logical link is connected to on the remote LAN.
|
SNMPv2-TCDisplayString Enumerated Values:
Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.4.2.2.2.3.1.6 |
||||||
|
lanrangerLinkConnDeviceSWVer
SW Version of the device that the logical link is
connected to, on the remote LAN. |
SNMPv2-TCDisplayString Enumerated Values:
Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.4.2.2.2.3.1.7 |
||||||
|
lanrangerLinkConnNumLanStation
The number of stations of the remote LAN.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.2.2.2.3.1.8 |
||||||
|
lanrangerLinkSyncStatus
The Sync link status.
|
Enumeration | .1.3.6.1.4.1.164.4.2.2.2.3.1.9 |
lanrangerModemTable
table.1.3.6.1.4.1.164.4.2.2.3
·
1 row entry
·
11 columns
A list of Modem entries. The number of entries is up to ifIndex.
LANRANger-specific parameter values for a Modem.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
lanrangerModemLinkIndex
A list of asynchronous ports of the link, according to
ifIndex. Synchronous ports will not appear in this table. Their port number will be skipped. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.2.2.3.1.1 |
||||||
|
lanrangerModemName
The Modem Name identifier for MBE/TRE.
Up to 50 characters. |
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.4.2.2.3.1.2 |
||||||
|
lanrangerModemSettingString
Modem setting String.
Up to 80 characters. |
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.4.2.2.3.1.3 |
||||||
|
lanrangerModemAutobaudingSpeed
Enable or disable autobauding.
When the Autobauding feature is enabled, the MBE/TRE automatically ranges over various Baud rates, starting with 115.2 Kbps, until the correct Baud rate of the modem is detected. |
Enumerationr/w | .1.3.6.1.4.1.164.4.2.2.3.1.4 |
||||||
|
lanrangerModemResetBeforeSetup
Reset the modem before setup is performed.
It is recommended to reset the modem before modem setup session. |
Enumerationr/w | .1.3.6.1.4.1.164.4.2.2.3.1.5 |
||||||
|
lanrangerModemAnalyzeAnswers
Enable this option if a modem using non-standard answering is used.
When this mode is enabled, the MBE/TRE awaits modem answers 'CONNECT', 'CARRIER', or 'OK', after it transmits a modem command. Modem answers acknowledg… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.4.2.2.3.1.6 |
||||||
|
lanrangerModemSpeaker
Toggle the Modem Speaker On or Off .
|
Enumerationr/w | .1.3.6.1.4.1.164.4.2.2.3.1.7 |
||||||
|
lanrangerModemDialingNumber
Various command switches listed in Modem Dialing Number Menu
allows selection of tone, pulse-dialing, or various wait states. P - Set Pulse dialing number . T - Set Tone dialing number . W - Wait for dialing tone befor… |
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.4.2.2.3.1.8 |
||||||
|
wrLocalDialBackNumber
This is the number that the Remote Modem will use to call the local
Modem at Dial Back. Various command switches listed in Modem Dialing Number Menu allows selection of tone, pulse-dialing, or various wai… |
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.4.2.2.3.1.9 |
||||||
|
wrRingsBeforeAnswer
Determines which ring the modem will wait to answer the
phone on. |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.2.2.3.1.10 |
||||||
|
lanrangerModemDialRetries
The number of dialing retries requested.
Default = 0 |
Integer32r/w | .1.3.6.1.4.1.164.4.2.2.3.1.11 |
lanrangerLinkPktSwTable
table.1.3.6.1.4.1.164.4.2.2.4
·
1 row entry
·
7 columns
A list of X.25/FR modules entries. The number of entries is up to ifIndex.
LANRANger-specific parameter values for X.25/FR modules.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
lanrangerLinkPktSwIndex
A unique value for each X.25/FR of the link, according to
numbering system of ifIndex. The maximum number of links is ifIndex. The value for each link must remain constant at least from one re-initialization of the n… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.2.2.4.1.1 |
||||||
|
lanrangerLinkPktSwType
Packet Switch Type.
|
Enumeration | .1.3.6.1.4.1.164.4.2.2.4.1.2 |
||||||
|
lanrangerLinkPktSwControlSignal
Packet Switch control command.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.4.2.2.4.1.3 |
||||||
|
lanrangerLinkPktSwSpeed
The Pkt Switch port's speed in bits per second.
Range: 1200bps .. 1544000bps |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.2.2.4.1.4 |
||||||
|
lanrangerLinkPktSwConfigParity
The Pkt Switch Config port's character parity bit.
Applicable only for x25FRConfigChannel. For x25FRChannel the value notApplicable applies. |
Enumerationr/w | .1.3.6.1.4.1.164.4.2.2.4.1.5 |
||||||
|
lanrangerLinkPktSwConfigStopBit
The Pkt Switch Config port's number of stop bits.
Applicable only for x25FRConfigChannel. For x25FRChannel the value notApplicable applies. |
Enumerationr/w | .1.3.6.1.4.1.164.4.2.2.4.1.6 |
||||||
|
lanrangerLinkPktSwResetModule
Reset command to Pkt Switch module.
Applicable only for x25FRChannel. The command will have no effect on x25FRConfigChannel. |
Enumerationr/w | .1.3.6.1.4.1.164.4.2.2.4.1.7 |
wrPPPTable
table.1.3.6.1.4.1.164.4.2.2.5
·
1 row entry
·
16 columns
This table contains only parameters that do not exist in the PPP standard MIBS. The table contains a list of PPP entries. The number of entries is up to ifIndex.
LANRANger-specific parameter values for a PPP.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
wrPPPCompressionHeaderField
This configuration option provides a method to negotiate the
compression of the Data Link Layer Address and Control fields. This configuration option is sent to inform the peer that the implementation can receive compre… |
Enumerationr/w | .1.3.6.1.4.1.164.4.2.2.5.1.1 |
||||||||
|
wrPPPCompressionProtocolFields
This configuration option provides a method to negotiate the
compression of the PPP Protocol field. This configuration option is sent to inform the peer that the implementation can receive such single octet Protocol fie… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.4.2.2.5.1.2 |
||||||||
|
wrPPPSTACCompressionType
The PPP compression control protocol provides a method to negotiate
and utilize compression protocol over PPP encapsulated links. These are Different types of data compression algorithm for PPP encapsulated packets. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.4.2.2.5.1.3 |
||||||||
|
wrPPPAuthProtocol
The type of authentication protocol being used. The left parameter
is the maximum authentication, the right parameter is minimum authentication. |
Enumerationr/w | .1.3.6.1.4.1.164.4.2.2.5.1.4 |
||||||||
|
wrPPPSecurityType
Type of unit.
|
Enumerationr/w | .1.3.6.1.4.1.164.4.2.2.5.1.5 |
||||||||
|
wrPPPUserName
PPP User name.
|
OctetStringr/w | .1.3.6.1.4.1.164.4.2.2.5.1.6 |
||||||||
|
wrPPPPassword
PPP Password .
|
OctetStringr/w | .1.3.6.1.4.1.164.4.2.2.5.1.7 |
||||||||
|
wrPPPLinkActiveTime
PPP link active time in seconds
Values range: 2 - 900. Default value = 2 |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.2.2.5.1.8 |
||||||||
|
wrPPPIPCPSubnetMaskNegotiation
This object indicates the ifIndex of the link (LAN port)
through which IPCP Subnet Mask negotiation is allowed. The distinguished value of zero may be used if no link is enabled for IPCP Subnet Mask negotiation. … |
IF-MIBInterfaceIndexOrZeror/w Enumerated Values:
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32Type Constraints: range: 0..2147483647 |
.1.3.6.1.4.1.164.4.2.2.5.1.9 |
||||||||
|
wrPPPLinkControlProtocolStatus
PPP Link Control Protocol(LCP) Status
|
Enumeration | .1.3.6.1.4.1.164.4.2.2.5.1.10 |
||||||||
|
wrPPPAuthenticationStatus
PPP Authentication status.
|
Enumeration | .1.3.6.1.4.1.164.4.2.2.5.1.11 |
||||||||
|
wrPPPIpcpStatus
IPCP (IP Control Protocol) status.
|
Enumeration | .1.3.6.1.4.1.164.4.2.2.5.1.12 |
||||||||
|
wrPPPAssignedIPAddress
IP Address assigned by PPP.
|
RFC1155-SMIIpAddress Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.4.2.2.5.1.13 |
||||||||
|
wrPPPActualAuthProtocol
The Actual type of Authentication Protocol that is used.
|
Enumeration | .1.3.6.1.4.1.164.4.2.2.5.1.14 |
||||||||
|
wrPPPIpTranslationMode
This object enables the IP Translation Mode.
|
Enumerationr/w | .1.3.6.1.4.1.164.4.2.2.5.1.15 |
||||||||
|
wrPPPTranslatedIpAddr
This object represents the Translated IP Address.
It is relevant only when IP Translation Mode is 'enable'. |
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.4.2.2.5.1.16 |
wrMLPPPTable
table.1.3.6.1.4.1.164.4.2.2.6
·
1 row entry
·
3 columns
This table contains a list of ML-PPP entries.
Specific parameter values for a ML-PPP.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
wrMLPPPEpDiscriminatorEnable
Indicates whether the Endpoint Discriminator Option is enabled.
The Endpoint Discriminator Option represents identification of the system transmitting the packet. This option advises a system that th… |
Enumerationr/w | .1.3.6.1.4.1.164.4.2.2.6.1.1 |
||||||||||||||||||
|
wrMLPPPReorderingEnable
Indicates whether packets reordering option is enabled.
yes - packets received from MLPPP not in order are reordered, according to sequence number, before being transmitted to egress port. no - received p… |
Enumerationr/w | .1.3.6.1.4.1.164.4.2.2.6.1.2 |
||||||||||||||||||
|
wrMLPPPTxQueueSize
Indicates the number of frames in the Tx Queue.
|
SNMPv2-SMIUnsigned32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.2.2.6.1.3 |
pPPoETable
table.1.3.6.1.4.1.164.4.2.2.7.1
·
1 row entry
·
19 columns
The PPPoE (Point-to-Point Protocol over Ethernet) Table.
An entry in the PPPoE Table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
pPPoECnfgIdx
This object represents the first index of the table.
It can serve for Configuration index or other. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.2.2.7.1.1.1 |
||||||||||||||||||||||||||||||
|
pPPoEID
This object represents the PPPoE unique Identifier.
|
SNMPv2-SMIUnsigned32 Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.2.2.7.1.1.2 |
||||||||||||||||||||||||||||||
|
pPPoERowStatus
This object enables the user to create/delete entries in this table.
|
SNMPv2-TCRowStatusr/w Enumerated Values:
Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.4.2.2.7.1.1.3 |
||||||||||||||||||||||||||||||
|
pPPoEACName
This object represents the Name of the Access Concentrator,
with which the PPPoE session should be established. |
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.4.2.2.7.1.1.4 |
||||||||||||||||||||||||||||||
|
pPPoEServiceName
This object represents the Name of a specific Service
that will be requested on this PPPoE session. |
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Enumerated Values:
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.4.2.2.7.1.1.5 |
||||||||||||||||||||||||||||||
|
pPPoEEntityPointer
This parameter represents the entity (interface/port etc)
that is connected to this PPPoE. The value of this parameter is a pointer to an existing row of a table, where the entity connected to this PP… |
SNMPv2-TCRowPointerr/w Enumerated Values:
Textual Convention: SNMPv2-TCRowPointer ObjectIdentifier |
.1.3.6.1.4.1.164.4.2.2.7.1.1.6 |
||||||||||||||||||||||||||||||
|
pPPoESessionStatus
This object represents the Status of the PPPoE session.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.4.2.2.7.1.1.7 |
||||||||||||||||||||||||||||||
|
pPPoESessionID
This object represents PPPoE Session ID.
|
SNMPv2-SMIUnsigned32 Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.2.2.7.1.1.8 |
||||||||||||||||||||||||||||||
|
pPPoERemoteMacAddr
This object represents the MAC Address of the Access Concentrator,
with which the PPPoE session is established. |
MacAddress Constraints: range: 1-17Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.4.2.2.7.1.1.9 |
||||||||||||||||||||||||||||||
|
pPPoENoOfUsages
This object represents the number of times this PPPoE is used.
|
SNMPv2-SMIUnsigned32 Constraints: range: 1-6Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.2.2.7.1.1.10 |
||||||||||||||||||||||||||||||
|
pPPoESchedRestartMode
This object represents Scheduled Restart Mode.
|
Enumerationr/w Constraints: range: 1-6 |
.1.3.6.1.4.1.164.4.2.2.7.1.1.11 |
||||||||||||||||||||||||||||||
|
pPPoESchedRestartTime
This object represents Scheduled Restart Time.
It is relevant only when Scheduled Restart Mode is 'enable'. |
SNMPv2-TCDisplayStringr/w Enumerated Values:
Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.4.2.2.7.1.1.12 |
||||||||||||||||||||||||||||||
|
pPPoESchedRestartRandomRange
This object represents Scheduled Restart Random Range (in seconds).
It is relevant only when Scheduled Restart Mode is 'enable'. A scheduled restart Random VALUE (number of seconds) is selected within thi… |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.2.2.7.1.1.13 |
||||||||||||||||||||||||||||||
|
pPPoESchedRestartActualTime
This object represents Scheduled Restart Actual Time.
It is relevant only when Scheduled Restart Mode is 'enable'. For calculation of this time - see pPPoESchedRestartRandomRange. |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.4.2.2.7.1.1.14 |
||||||||||||||||||||||||||||||
|
pPPoEInitDelayRandomRange
This object represents the Initialization Delay Random Range (in seconds).
An initialization DELAY (number of seconds) is selected within this Random Range. This DELAY is used to delay the initialization … |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.2.2.7.1.1.15 |
||||||||||||||||||||||||||||||
|
pPPoEInitActualDelay
This object represents Initialization Delay (in seconds),
as selected within Initialization Delay Random Range (pPPoEInitDelayRandomRange). |
SNMPv2-SMIUnsigned32 Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.2.2.7.1.1.16 |
||||||||||||||||||||||||||||||
|
pPPoEVlanTagging
This object represents the VLAN Tagging.
|
Enumerationr/w | .1.3.6.1.4.1.164.4.2.2.7.1.1.17 |
||||||||||||||||||||||||||||||
|
pPPoEVlanId
This object represents the VLAN ID.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.2.2.7.1.1.18 |
||||||||||||||||||||||||||||||
|
pPPoEVlanPriority
This object represents the VLAN Priority.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.4.2.2.7.1.1.19 |
lanrangerStationTable
table.1.3.6.1.4.1.164.4.2.3.1
·
1 row entry
·
5 columns
A table that contains information about the stations on the remote LAN(s). A remote LANRANger contains a list of stations on its LAN, while a main LANRANger contains a list of stations at all the remote sites it is connected to.
Information about a specific station, that the LANRANger
lists as being on a remote LAN.
lists as being on a remote LAN.
Indexes
trimBackUpDay
| Column | Syntax | OID |
|---|---|---|
|
lanrangerStationPhysLink
The number of the physical link that is connected to the
remote LAN on which the station with the associated instance of lanrangerStationAddress is located. The number is the same as the ifIndex of the link. The valu… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.2.3.1.1.1 |
|
lanrangerStationLogLink
The number of the logical link that is connected
to the remote LAN on which the station with the associated instance of lanrangerStationAddress is located. The value will be zero on a remote LANRANger. noLogicLink = … |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.2.3.1.1.2 |
|
lanrangerStationAddress
The unicast MAC address of a station that the LANRANger
lists as being on a remote LAN. |
MacAddress Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.4.2.3.1.1.3 |
|
lanrangerStationStatus
The status of this entry. The meanings of the
values are: unknown(1) : learned(2) : the value of the corresponding instance of lanrangerStationAddress was learned and is being used. … |
Enumeration | .1.3.6.1.4.1.164.4.2.3.1.1.4 |
|
lanrangerStationSpoofingStatus
The spoofing status of this entry.
|
Enumeration | .1.3.6.1.4.1.164.4.2.3.1.1.5 |
lanrangerPermanentTable
table.1.3.6.1.4.1.164.4.2.3.4.3
·
1 row entry
·
4 columns
A table containing address information configured into the LANRANger by (local or network) management, specifying addresses on a remote LAN. This table objects can be set only on a Remote LANRANger.
Address information configured into the remote LANRANger
by (local or network) management specifying addresses
on a remote LAN.
by (local or network) management specifying addresses
on a remote LAN.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
lanrangerPermanentIfIndex
The number of the physical link that is connected to
the remote LAN, on which the station with the associated instance of lanrangerStationAddress is located. The number is the same as the ifIndex of the link. This da… |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.2.3.4.3.1.1 |
||||
|
lanrangerPermanentLogLink
The number of the logical link that is connected to the
remote LAN, on which the station with the associated instance of lanrangerPermanentAddress is located. The value will be noLogicLink on a remote LANRANger. This d… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.2.3.4.3.1.2 |
||||
|
lanrangerPermanentAddress
The MAC address entered by management to this entry.
Only the remote LANRANger will accept Set for this object ! ---------------- |
MacAddress Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.4.2.3.4.3.1.3 |
||||
|
lanrangerPermanentOperation
This object indicates the status of this entry.
active(1) - this entry is currently in use and will remain so even after the next reset of the LANRANger. delete(2) - writing this value to the obj… |
Enumerationr/w | .1.3.6.1.4.1.164.4.2.3.4.3.1.4 |
lanrangerSpoofingTable
table.1.3.6.1.4.1.164.4.2.3.6.3
·
1 row entry
·
4 columns
A list of Spoofing entries. The number of entries is
up to the current number of entries, according to the
LANRANger model.
Only the LOCAL LANRANger will show this table !
---------------
Spoofing parameters per entry of the Spoofing table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
lanrangerSpoofingGroup
The spoofing group.
Only the LOCAL Lanranger will show this table ! |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.2.3.6.3.1.1 |
|
lanrangerSpoofingMacAddress
MAC Address of the Remote Lanrangers.
Only the LOCAL Lanranger will show this table ! |
MacAddress Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.4.2.3.6.3.1.2 |
|
lanrangerSpoofingAging
Aging time defined for a whole group, in minutes.
Only the LOCAL Lanranger will show this table ! |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.2.3.6.3.1.3 |
|
lanrangerSpoofingTimeLeft
Time until aging expires, per station, in minutes.
Only the LOCAL Lanranger will show this table ! |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.2.3.6.3.1.4 |
trimIfTable
table.1.3.6.1.4.1.164.4.3.1.1
·
1 row entry
·
18 columns
RAD-specific interface table.
An entry in table trimIfTable.
Indexes
mlbPortIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
trimIfIndex
Index to the Trimbridge Interface Table. The interface defined by a
particular value of this index is the same interface as identified by the same value of ifIndex (MIB II). |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.3.1.1.1.1 |
||||||||
|
trimIfBoardNum
Reserved for possible future use. Not currently applicable to Trimbridge.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.3.1.1.1.2 |
||||||||
|
trimIfNetAddress
The IP address of the interface defined by the particular value of
trimIfIndex. |
RFC1155-SMIIpAddress Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.4.3.1.1.1.3 |
||||||||
|
trimIfStatus
The current status of the interface. Some of these status values are not applicable to Trimbridge.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.4.3.1.1.1.4 |
||||||||
|
trimIfClockType
trimIfClockType defines the type of clock each interface
uses: internal or external. |
Enumerationr/w | .1.3.6.1.4.1.164.4.3.1.1.1.5 |
||||||||
|
trimIfBaudRate
Defines the baud rate in use by the interface. The valid
rates are determined by the type of the media for which this baud rate is defined. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.3.1.1.1.6 |
||||||||
|
trimIfCost
This object is inapplicable to Trimbridge.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.3.1.1.1.7 |
||||||||
|
trimIfCompression
Defines whether data compression is enabled or disabled for the
interface. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.4.3.1.1.1.8 |
||||||||
|
trimIfCompressionStatus
Defines the status of the compression component:
not-inserted - compression component is not in the device active - compression is enabled and operates correctly not-active - compression is enables but does not operate… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.4.3.1.1.1.9 |
||||||||
|
trimIfCompressionRate
Percentage of compression. This variable applies only
if trimCompressionStatus is active. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.3.1.1.1.10 |
||||||||
|
trimIfLATCompression
Enable/Disable the LAT Compression.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.4.3.1.1.1.11 |
||||||||
|
trimIfCompressionType
This parameter indicates the type of compression option available in
the device. `None(1) - indicates that there is no compression option in the device lowSpeed(2) - indicates a compression option whic… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.4.3.1.1.1.12 |
||||||||
|
trimIfFilterMode
This parameter indicates the type of filtering in the device.
|
Enumerationr/w | .1.3.6.1.4.1.164.4.3.1.1.1.13 |
||||||||
|
trimIfConType
This parameter indicates the connector type of an interface.
|
Enumeration Constraints: range: 2-2 |
.1.3.6.1.4.1.164.4.3.1.1.1.14 |
||||||||
| trimIfRemAddress | OctetStringr/w Constraints: range: 3-3 |
.1.3.6.1.4.1.164.4.3.1.1.1.15 |
||||||||
|
trimIfLocSubAddress
Space is not valid. If the string includes a space,
the whole entry is considered not valid. |
OctetStringr/w | .1.3.6.1.4.1.164.4.3.1.1.1.16 |
||||||||
|
trimIfRemSubAddress
Space is not valid. If the string includes a space,
the whole entry is considered not valid. |
OctetStringr/w | .1.3.6.1.4.1.164.4.3.1.1.1.17 |
||||||||
|
trimIfCLIVerification
Enables/Disables verification of Control Line Identification (CLI)
|
Enumerationr/w | .1.3.6.1.4.1.164.4.3.1.1.1.18 |
trimIfThresholdRepTable
table.1.3.6.1.4.1.164.4.3.1.3.1
·
1 row entry
·
5 columns
.....
An entry in table trimIfThresholdRepTable.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
trimIfThreRepId
The Interface number serves as an index to the Threshold Reoprt Table.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.3.1.3.1.1.1 |
|
trimIfThreRepCounterId
The Counter ID serves as an index to the Threshold Reoprt Table, and identify the counter for which
to pot the threshold. |
Enumeration | .1.3.6.1.4.1.164.4.3.1.3.1.1.2 |
|
trimThresholdValue
The Threshold value , this is the maximum rate of counter increments before the element issue trap.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.3.1.3.1.1.3 |
|
trimIfThreRepSampleRate
The network object will sample the counter atthis interval. When this parameter
is set to 0, the treshold comparison is disable. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.3.1.3.1.1.4 |
|
trimIfThreRepTrapRate
The network object will issue a trap according to this interval. Note that the trape
interval nust be equal or larger then trimIfThreRepSampleRate. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.3.1.3.1.1.5 |
trimBackUpScheduleTable
table.1.3.6.1.4.1.164.4.3.2.10
·
1 row entry
·
2 columns
This is a table that contains the reroute shedule for the backup link. The index is the day of the week, starting with 1 for Sunday, ending with 7 for Saturday.
An entry in table trimBackUpScheduleTable.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
trimBackUpDay
The day of the week for which the entry applies. The days are numbered from
1 to 7, representing Monday through Sunday. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.3.2.10.1.1 |
|
trimBackUpFromTo
This is the time during which backup should be disabled, expressed
as xx:xx-yy:yy, where x's reflect the time from and y's reflect the time to. The first two digits, in x and in y, are the hour and the second two di… |
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.4.3.2.10.1.2 |
trimTRIfTable
table.1.3.6.1.4.1.164.4.3.3.1
·
1 row entry
·
4 columns
This table defines configuration parameters for Token Ring interfaces in the Trimbridge-16.
An entry in table trimTRIfTable.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
trimTRIfIndex
Index to the Token Ring Interface Table. The interface defined by a
particular value of this index is the same interface as identified by the same value of ifIndex (MIBII). |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.3.3.1.1.1 |
|
trimTREarlyTokenRelease
This parameter controls the early token release. This paramenter
is applicable only to 16 Mbps rings. |
Enumerationr/w | .1.3.6.1.4.1.164.4.3.3.1.1.2 |
|
trimTRLocalAdminAddress
A locally administered MAC Address of this interface.
|
MacAddressr/w Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.4.3.3.1.1.3 |
|
trimTRLocalAdminAddressStatus
This parameter controls whether the bridge uses the locally administered MAC
Address defined for this interface, when enable(1), or not , when disable(2). |
Enumerationr/w | .1.3.6.1.4.1.164.4.3.3.1.1.4 |
febFtbTranslIfTable
table.1.3.6.1.4.1.164.4.4.1.1
·
1 row entry
·
3 columns
The translation table defines which type of translation is required for each device interface. This is particularly important for WAN links, as the translating device does not have a knowledge of the target LAN type.
Entry in the translation table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
febFtbTranslIfIndex
Index to the Translation Table. The interface defined by a particular value of this index is the
same interface as identified by the same value of ifIndex (MIBII). |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.4.1.1.1.1 |
||||||||||||
|
febFtbTunnelProtocol
IEEE 802.1h standard defines the tunneling for Appletalk I. This parameter enables the user
to specify Ethertype of an additional protocol to tunnel (e.g. IPX). For IPX, Enter 8137 to translate Token Ring SNAP frames to… |
OctetStringr/w | .1.3.6.1.4.1.164.4.4.1.1.1.2 |
||||||||||||
|
febFtbTranslIPXRawEthernet
This variable defines the translation mode for IPX frames in standrad Token Ring format. It is
applicable to Ethernet interfaces (i.e. febFtbTranslSwitch variable has value Ethernet (2). ). ethernetRaw8023: translate… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.4.4.1.1.1.3 |
febFtbLanTable
table.1.3.6.1.4.1.164.4.4.2.1
·
1 row entry
·
2 columns
.
Entry in the LanTab table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
febFtbLanTabIfIndex
This variable defines the related interface
|
SNMPv2-SMIInteger32 Constraints: range: 2-2Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.4.2.1.1.1 |
|
febFtbLanTabEntNumber
This variable defines the number of entries in the LAN table reletaed to the specific interface
|
SNMPv2-SMIInteger32 Constraints: range: 3-3Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.4.2.1.1.2 |
mlbAddressTable
table.1.3.6.1.4.1.164.4.5.2.1
·
1 row entry
·
4 columns
A table that contains information about the MLB ports address .
Information about a specific port that the MLB lists define.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
mlbPortIndex
A unique value for each port, equal to the value of ifIndex for the port.
The maximum number of ports for mlb is 2 . |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.4.5.2.1.1.1 |
||||
|
mlbBurnAddress
This is the burned-in MacAddress on the LANRANger.
|
MacAddress Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.4.5.2.1.1.2 |
||||
|
mlbLocAddress
This is a locally administered address. If a zero value appears, the network administrator
did not set a locally administered address. |
MacAddressr/w Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.4.5.2.1.1.3 |
||||
|
mlbActiveAddress
The MAC address that is in use on the LANRANger.
The address selected will appear in ifPhysAddress. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.4.5.2.1.1.4 |
nvaAgentTable
table.1.3.6.1.4.1.164.5.1.3.3
·
1 row entry
·
14 columns
An entry in table nvaAgentTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
nvaAgIndex
Agent number .
Range (1 - nvaAgentsNumber) |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.5.1.3.3.1.1 |
||||
|
nvaAgAdminStatus
The admin. status of NV AGENT. Value of 'disable'
will prevent the NetView agent from trying to connect to the NetView management system |
Enumerationr/w | .1.3.6.1.4.1.164.5.1.3.3.1.3 |
||||
|
nvaAgOperState
Current Operation state of the NetView agent. Active
state means that the NetView agent is in session with the NetView management system |
Enumeration | .1.3.6.1.4.1.164.5.1.3.3.1.4 |
||||
|
nvaAgFilter
Alert filter bit mask. Each bit corresponds to a specific alert
sent by the NetView agent. |
OctetString | .1.3.6.1.4.1.164.5.1.3.3.1.5 |
||||
|
nvaAgAllowRunCmd
Defines whether the NetView agent is allowed to handle
operational commands, received by the RUNCMD facility |
Enumerationr/w | .1.3.6.1.4.1.164.5.1.3.3.1.6 |
||||
|
nvaAgAccessType
Defines the method in which the agent tries to
connect to the NetView management system(the SNA host) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.5.1.3.3.1.7 |
||||
|
nvaAgIfIndex
The port number of the interface in which the
NetView agent connects to the SNA host |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.5.1.3.3.1.8 |
||||
|
nvaAgXidBlockId
The BLOCKID part of the XID information which the NetView agent
should use to connect to the NetView management system (The SNA host) |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.5.1.3.3.1.9 |
||||
|
nvaAgXidBlockNum
The BLOCKNUM part of the XID information which the NetView agent
should use to connect to the NetView management system (The SNA host) |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.5.1.3.3.1.10 |
||||
|
nvaAgSSap
Local SAP, used for the NetView session - for LLC
access type session only. |
Sapr/w | .1.3.6.1.4.1.164.5.1.3.3.1.11 |
||||
|
nvaAgDSap
Remote(host) Sap used by the NetView agent for the
SNA host connection - for LLC access session type only. |
Sapr/w Enumerated Values:
|
.1.3.6.1.4.1.164.5.1.3.3.1.12 |
||||
|
nvaAgRemMacAddr
Remote(host) MAC address used by the NetView agent
for the SNA host connection - for LLC access session type only. |
MacAddressr/w Constraints: range: 2-2Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.5.1.3.3.1.13 |
||||
|
nvaAgSdlcAddr
SDLC address used by the NetView agent for the SNA
host connection - for SDLC access session type only. |
SdlcAddrr/w Constraints: range: 3-3 |
.1.3.6.1.4.1.164.5.1.3.3.1.14 |
||||
|
nvaAgResourceName
A 4 character name that is appended to the resource
name in the NetView alerts sent by the NetView agent |
SNMPv2-TCDisplayStringr/w Enumerated Values:
Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.5.1.3.3.1.15 |
nvaAgentStatTable
table.1.3.6.1.4.1.164.5.1.3.4
·
1 row entry
·
11 columns
An entry in table nvaAgentStatTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
nvaAgStatIndex
Agent number .
Range (1 - nvaAgentsNumber) |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.5.1.3.4.1.1 |
||||
|
nvaAgStatTime
Time since last reset of the NV agent statistics.
Setting to a value of 0 will clear all Agents' statistics. |
RFC1155-SMITimeTicksr/w Textual Convention: RFC1155-SMITimeTicks Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.5.1.3.4.1.2 |
||||
|
nvaAgActPu
Number of session initiation (ACTPU) requests received from
the SNA host |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.5.1.3.4.1.3 |
||||
|
nvaAgDactPu
Number of session disconnection (DACTPU) requests received
from the SNA host |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.5.1.3.4.1.4 |
||||
|
nvaAgRpNmvt
Number of NMVTs received from the SNA host, and responded
with a positive response. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.5.1.3.4.1.5 |
||||
|
nvaAgRnNmvt
Number of NMVTs received from the SNA host, and
respond with a negative response. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.5.1.3.4.1.6 |
||||
|
nvaAgSpNmvt
Number of NMVTs (of any type) sent to the SNA host.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.5.1.3.4.1.7 |
||||
|
nvaAgSAlerts
Number of alert NMVTs sent by the NetView agent.
|
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.5.1.3.4.1.9 |
||||
|
nvaAgRRunCmd
Number of RUNCMD (execute-command NMVTs) received by the
NetView agent. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.5.1.3.4.1.10 |
||||
|
nvaAgSRunCmd
Number of RUNCMD replies sent to the NetView host.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.5.1.3.4.1.11 |
||||
|
nvaAgSPdstat
Number of PDSTAT NMVTs sent by the NetView agent.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.5.1.3.4.1.12 |
snaSessTable
table.1.3.6.1.4.1.164.5.1.5.3
·
1 row entry
·
18 columns
Holding SNA session's parameters for each side of a specific session, indexed by session_id
An entry in table snaSessTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
sessIfIndex
Interface used by this SNA session
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.5.1.5.3.1.1 |
||||
|
sessId
The unique identifier of the converted SNA session id
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.5.1.5.3.1.2 |
||||
|
sessSide
The SNA session side. Each session handled by SNAR/device,
creates 2 SNA sessions, hereafter called 'side A' and 'side B' Configuration parameters, and Statistics are defined for each side separately. |
Enumeration | .1.3.6.1.4.1.164.5.1.5.3.1.3 |
||||
|
sessDev
The device number, used in devices setup. N/A to SNAR.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.5.1.5.3.1.4 |
||||
|
sessAdminStatus
Admin. status of this session, as requested by the manager.
10 - Session is invalid, and not handled by SNAR devices. 1 - Session is disabled. SNAR/Device will not try to start this session. 2- Session is enable… |
Enumerationr/w | .1.3.6.1.4.1.164.5.1.5.3.1.5 |
||||
|
sessOperState
Current operating state.
See Manual reference for more information. |
Enumeration | .1.3.6.1.4.1.164.5.1.5.3.1.6 |
||||
|
sessAccessType
The access type used by this side of the converted
session. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.5.1.5.3.1.7 |
||||
|
sessSXidBlockId
The BLOCKID part of the XID information sent by this side for the
SNA session initiation |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.5.1.5.3.1.8 |
||||
|
sessSXidBlockNum
The BLOCKNUM part of the XID information sent by this side for the
SNA session initiation |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.5.1.5.3.1.9 |
||||
|
sessSSap
The Local SAP used by SNAR for this session's side (LLC
sessions only) |
Sapr/w Enumerated Values:
|
.1.3.6.1.4.1.164.5.1.5.3.1.10 |
||||
|
sessDSap
The remote SAP used by SNAR for this session's side
(LLC sessions only) |
Sapr/w | .1.3.6.1.4.1.164.5.1.5.3.1.11 |
||||
|
sessRemMacAddr
The remote MAC address used by this session's side
(LLC sessions only) |
MacAddressr/w Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.5.1.5.3.1.12 |
||||
|
sessSdlcAddr
The SDLC address used by this session's side
(SDLC sessions only, both primary and secondary) |
SdlcAddrr/w | .1.3.6.1.4.1.164.5.1.5.3.1.13 |
||||
|
sessGroupPoll
The address of the group poll in which this session's side
participates (SLDC secondary only). A value of 0 indicates that it doesn't participate in any group. Only one group is supported for each SDLC line (same port) |
SdlcAddrr/w | .1.3.6.1.4.1.164.5.1.5.3.1.14 |
||||
|
sessRole
The type of SDLC session for this side.
|
Enumerationr/w | .1.3.6.1.4.1.164.5.1.5.3.1.15 |
||||
|
sessIpEncapsulated
Specified whether this session data is encapsulated within
UDP/IP |
Enumerationr/w | .1.3.6.1.4.1.164.5.1.5.3.1.16 |
||||
|
sessDestIpAddr
The destination IP address (IP encapsulated sessions only).
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.5.1.5.3.1.17 |
||||
|
sessRemX25Addr
The remote X25 address (QLLC only) .
|
OctetStringr/w | .1.3.6.1.4.1.164.5.1.5.3.1.18 |
snaSessTuneTable
table.1.3.6.1.4.1.164.5.1.5.4
·
1 row entry
·
16 columns
Holding SNA session parameters for each side of a specific session, indexed by session_id
An entry in table snaSessTuneTable.
Indexes
sdlcIfIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
sessTuneIfIndex
The SNA session side.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.5.1.5.4.1.1 |
||||
|
sessTuneId
The unique identifier of the converted SNA session.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.5.1.5.4.1.2 |
||||
|
sessTuneSide
The SNA session's side.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.5.1.5.4.1.3 |
||||
|
sessBufferSize
The max. buffer size of remote device (All sessions).
|
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.5.1.5.4.1.4 |
||||
|
sessSegmentation
Specifies whether the SNAR should perform
segmentation when incoming frame on one side is longer then the sessSideBufferSize of the other size 1 - disable - don't perform segmentation 2 - enable - perform… |
Enumerationr/w | .1.3.6.1.4.1.164.5.1.5.4.1.5 |
||||
|
sessFirstSide
Specifies which side of the two SNA sides (side_a or side_b)
should be started first (SNAR only, N/A to devices) |
Enumeration | .1.3.6.1.4.1.164.5.1.5.4.1.6 |
||||
|
sessWindow
The max window size (1 .. 127) for this session's side.
|
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.5.1.5.4.1.7 |
||||
|
sessDuplex
Specifies the type of SDLC device on the other end
of the SDLC line. FULL- means a device capable of transmit and receive data simultaneously. |
Enumerationr/w | .1.3.6.1.4.1.164.5.1.5.4.1.8 |
||||
|
sessRXidBlockId
The BLOCKID part of the XID information expected to be received
on this side of the SNA session |
OctetStringr/w | .1.3.6.1.4.1.164.5.1.5.4.1.9 |
||||
|
sessRXidBlockNum
The BLOCKNUM part of the XID information expected to be received
on this side of the SNA session |
OctetStringr/w | .1.3.6.1.4.1.164.5.1.5.4.1.10 |
||||
|
sessCheckXid
Specified whether the received XID information should
be checked and compared to the value of sessRXid: 1 - disable: don't check 2 - enable : check |
Enumerationr/w | .1.3.6.1.4.1.164.5.1.5.4.1.11 |
||||
|
sessT1
The T1 timer (in 100 msec) for this session's side.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.5.1.5.4.1.12 |
||||
|
sessTi
The Ti timer (in sec) for this session
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.5.1.5.4.1.13 |
||||
|
sessT2
The T2 timer (in 100 msec) for this session
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.5.1.5.4.1.14 |
||||
|
sessN2
The N2 value for this session's side
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.5.1.5.4.1.15 |
||||
|
sessUdpPort
The UDP port used by SNAR (IP encapsulated
sessions only) |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.5.1.5.4.1.16 |
snaSessStatTable
table.1.3.6.1.4.1.164.5.1.5.5
·
1 row entry
·
10 columns
Holding SNA session parameters for each side of a specific session, indexed by session_id
An entry in table snaSessStatTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| sessStatIfIndex | SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.5.1.5.5.1.1 |
||||||||
|
sessStatId
The unique identifier of the converted SNA session.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.5.1.5.5.1.2 |
||||||||
|
sessStatSide
The SNA session's side.
|
Enumeration | .1.3.6.1.4.1.164.5.1.5.5.1.3 |
||||||||
|
sessStatTime
Time since last reset of this session statistics.
Setting to a value of 0 will clear all session statistics. |
RFC1155-SMITimeTicksr/w Textual Convention: RFC1155-SMITimeTicks Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.5.1.5.5.1.4 |
||||||||
|
sessSPius
The number of PIUs sent by this session's side
|
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.5.1.5.5.1.5 |
||||||||
|
sessSBytes
The number of bytes sent by this session's side.
|
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.5.1.5.5.1.6 |
||||||||
|
sessRPius
The number of PIUs received by this session
|
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.5.1.5.5.1.7 |
||||||||
|
sessRBytes
The number of bytes received by this session's side.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.5.1.5.5.1.8 |
||||||||
|
sessSessFailure
The number of session failures occurs to this
session's side. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.5.1.5.5.1.9 |
||||||||
|
sessXidDenieds
The number of XID denied by this session's side
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.5.1.5.5.1.10 |
snaSessQllcTable
table.1.3.6.1.4.1.164.5.1.5.7
·
1 row entry
·
14 columns
Holding SNA session parameters for each side of a specific session, indexed by session_id
An entry in table snaSessQllcTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| sessQllcIfIndex | SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.5.1.5.7.1.1 |
||||||||
|
sessQllcId
The unique identifier of the converted SNA session.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.5.1.5.7.1.2 |
||||||||
|
sessQllcSide
The SNA session's side.
|
Enumeration | .1.3.6.1.4.1.164.5.1.5.7.1.3 |
||||||||
|
sessInCalls
N/Allowed to accept call indicators (QLLC only)
1- disable: don't allow to accept call indications 2- enable: Allow to accept call indications |
Enumerationr/w | .1.3.6.1.4.1.164.5.1.5.7.1.4 |
||||||||
|
sessOutCalls
N/Allowed to initiate call requests (QLLC only)
1- disable: don't allow to initiate call requests 2- enable: Allow to initiate call requests |
Enumerationr/w | .1.3.6.1.4.1.164.5.1.5.7.1.5 |
||||||||
|
sessPVC
PVC being used or not (QLLC only)
1 - disable :not use 2 - enable :use |
Enumerationr/w | .1.3.6.1.4.1.164.5.1.5.7.1.6 |
||||||||
|
sessCallReqData
The user's data for call requests (QLLC only).
|
OctetStringr/w | .1.3.6.1.4.1.164.5.1.5.7.1.7 |
||||||||
|
sessConnReqFacility
The facilities for connection requests (QLLC only).
|
OctetStringr/w | .1.3.6.1.4.1.164.5.1.5.7.1.8 |
||||||||
|
sessGroupId
The facility group id (QLLC only)
|
OctetStringr/w | .1.3.6.1.4.1.164.5.1.5.7.1.9 |
||||||||
|
sessDtePswd
The password for local DTE (QLLC only)
|
OctetStringr/w | .1.3.6.1.4.1.164.5.1.5.7.1.10 |
||||||||
|
sessDteId
The identification for local DTE (QLLC only).
|
OctetStringr/w | .1.3.6.1.4.1.164.5.1.5.7.1.11 |
||||||||
|
sessMaxInPktSize
The max inbound packet size (QLLC only).
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.5.1.5.7.1.12 |
||||||||
|
sessMaxOutPktSize
The max outbound packet size (QLLC only).
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.5.1.5.7.1.13 |
||||||||
| sessCallIndReverse | OctetStringr/w | .1.3.6.1.4.1.164.5.1.5.7.1.14 |
sdlcTable
table.1.3.6.1.4.1.164.5.2.1.3
·
1 row entry
·
7 columns
An entry in table sdlcTable.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
sdlcIfIndex
The value of this object identifies the
interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object, defined in [4,6], fo… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.5.2.1.3.1.1 |
| sdlcNrz | Enumerationr/w | .1.3.6.1.4.1.164.5.2.1.3.1.2 |
| sdlcDuplex | Enumerationr/w | .1.3.6.1.4.1.164.5.2.1.3.1.3 |
| sdlcClockType | Enumerationr/w | .1.3.6.1.4.1.164.5.2.1.3.1.4 |
| sdlcSpeed | SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.5.2.1.3.1.5 |
| sdlcConnectorType | SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.5.2.1.3.1.6 |
| sdlcRts | Enumeration | .1.3.6.1.4.1.164.5.2.1.3.1.7 |
sdlcStatTable
table.1.3.6.1.4.1.164.5.2.1.4
·
1 row entry
·
9 columns
An entry in table sdlcStatTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
sdlcStatIfIndex
The value of this object identifies the
interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object, defined in [4,6], fo… |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.5.2.1.4.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sdlcTimeSinceReset
The time laps since the last reset statistics.
Setting the object to 0 will reset all line statistics. |
RFC1155-SMITimeTicksr/w Textual Convention: RFC1155-SMITimeTicks Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.5.2.1.4.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| sdlcStatFramesTrans | SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.5.2.1.4.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| sdlcStatBytesTrans | SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.5.2.1.4.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| sdlcStatFramesRcv | SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.5.2.1.4.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| sdlcStatBytesRcv | SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.5.2.1.4.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| sdlcStatFramesAbort | SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.5.2.1.4.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sdlcStatFramesBad
This counter holds the number of all bad frames.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.5.2.1.4.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| sdlcStatFramesCrc | SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.5.2.1.4.1.9 |
cvtDot5Table
table.1.3.6.1.4.1.164.5.2.2.1
·
1 row entry
·
6 columns
This table contains Token Ring interface parameters and state variables. One entry per 802.3 interface.
An entry in table cvtDot5Table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||
|---|---|---|---|---|
|
cvtDot5IfIndex
The value of this object identifies the
802.5 interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object, defined in [4,… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.5.2.2.1.1.1 |
||
| cvtDot5MacAddr | MacAddressr/w Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.5.2.2.1.1.2 |
||
|
cvtDot5Commands
When this object is set to the value of
open(2), the station should go into the open state. When this object is set to the value of of reset(3), the station should perform reset. When this object is set to the value o… |
Enumerationr/w | .1.3.6.1.4.1.164.5.2.2.1.1.3 |
||
|
cvtDot5RingSpeed
The ring's bandwidth.
|
Enumerationr/w | .1.3.6.1.4.1.164.5.2.2.1.1.4 |
||
|
cvtDot5ActMonParticipate
If this object has a value of true(1) then
this interface will participate in the active monitor selection process. If the value is false(2) then it will not. Setting this object might not have an effect until the next… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.5.2.2.1.1.5 |
||
|
cvtDot5Functional
The bit mask of all TR functional
addresses for which this interface will accept frames. |
MacAddressr/w Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.5.2.2.1.1.6 |
cvtDot3Table
table.1.3.6.1.4.1.164.5.2.3.1
·
1 row entry
·
5 columns
This table contains ETHERNET interface parameters and state variables, one entry per 802.3 interface.
An entry in table cvtDot3Table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
cvtDot3IfIndex
The value of this object identifies the
802.3 interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object, defined in [4,… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.5.2.3.1.1.1 |
| cvtDot3MacAddr | MacAddressr/w Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.5.2.3.1.1.2 |
|
cvtDot3Commands
When this object is set to the value of
open(2), the station should go into the open state. of reset(3), then the station should do a reset. On a reset, all MIB counters should retain their values, if possible. Other … |
Enumerationr/w | .1.3.6.1.4.1.164.5.2.3.1.1.3 |
|
cvtDot3ActMonParticipate
If this object has a value of true(1) then
this interface will participate in the active monitor selection process. If the value is false(2) then it will not. Setting this object might not have an effect until the next… |
Enumerationr/w | .1.3.6.1.4.1.164.5.2.3.1.1.4 |
|
cvtDot3Functional
The bit mask of all Ethernet functional
addresses for which this interface will accept frames. |
MacAddressr/w Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.5.2.3.1.1.5 |
mngTrapIpTable
table.1.3.6.1.4.1.164.6.2.7
·
1 row entry
·
6 columns
This table indicates the destination address of the traps. Internally it will be limited to ten addresses.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
mngID
This value indicates an index of a specific IP address
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.7.1.1 |
||||
|
mngIP
This value indicates the destination address of the traps. IP 0.0.0.0 removes the entry.
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.6.2.7.1.2 |
||||
|
mngIPMask
deprecated
This value indicates the mask of the destination addresses of the traps.
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.6.2.7.1.3 |
||||
|
mngTrapMask
The value of this attribute determines the type of traps the
agent should mask and not send to this NMS. The value is differently determined for different products. There are mainly two methods: - an integer number, … |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.7.1.4 |
||||
|
mngAlarmTrapMask
The value of this object determines the alarm traps that the
agent should mask (not send to this manager). The value is an Octet String, where each bit is assigned to a certain trap. If the bit = 1, the trap will be… |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.6.2.7.1.5 |
||||
|
mngSnmpTrapUdpPort
This variable enables to set the UDP port (socket) used for SNMP traps.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.7.1.6 |
trapTable
table.1.3.6.1.4.1.164.6.2.11
·
1 row entry
·
4 columns
This table may include the last few traps generated by the agent, for future retrieval. The table has a limited capacity. If traps are not retrieved in proper time, they will be over-written by new traps. For other devices, it can include generic variables that will be attached to traps as 'accessible-for-notify'.
An entry in trapTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
trapID
This object indicates an index of a specific trap.
Can be used also for any trap, while trapVal is used as 'accessible-for-notify' or trapNumeric is used. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.11.1.1 |
||||
|
trapVal
This object is the actual ASCII description of the trap.
It can be used also as attached variable of traps, in order to detail in explicit ASCII text, data of the trap. In this case, it is used as 'accessible-for-notif… |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.6.2.11.1.2 |
||||
|
trapTimeSinceOccurrence
This object indicates the amount of time passed since the occurrence of the event that
triggered this trap. |
RFC1155-SMITimeTicks Textual Convention: RFC1155-SMITimeTicks Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.11.1.3 |
||||
|
trapNumeric
This object is a numeric general parameter, that can be attached to any trap.
Values can be positive or negative. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.11.1.4 |
intSwdlTable
table.1.3.6.1.4.1.164.6.2.12.10
·
1 row entry
·
10 columns
This parameters table is for internal Software down load. It also includes data about all files contained in the Object from which down-load is performed.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
intSwdlObjIdx
The index of the object from which down-load is performed.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.12.10.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
intSwdlFileIdx
The index of the files included in intSwdlObjIdx.
One of these files can be selected to be internally downloaded. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.12.10.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
intSwdlFileName
The name of the file.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.6.2.12.10.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
intSwdlFileSwVer
The software version of the file.
|
SNMPv2-TCDisplayString Enumerated Values:
Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.6.2.12.10.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
intSwdlSwDate
The software version date of the file.
|
SNMPv2-TCDisplayString Enumerated Values:
Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.6.2.12.10.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
intSwdlSize
The size of the file.
|
SNMPv2-TCDisplayString Enumerated Values:
Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.6.2.12.10.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
intSwdlCmd
The command to down-load a SW file to an object.
The Agent will change the value of this MIB object to off(2) automatically, after accepting the command. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.6.2.12.10.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
intSwdlToSubSystem
This object defines the subsystem for download.
Bit='1'- APPLY to respective sub system. Bit='0'- DO NOT APPLY to respective sub system. For more details see product specification. For every octet bit0=LSB, bit7=MSB |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.6.2.12.10.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
intSwdlCardType
This object defines the Card type that this file is relevant for.
|
Enumeration | .1.3.6.1.4.1.164.6.2.12.10.1.9 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
intSwdlFlashIdx
The index of the flash memory this file is stored in (1 or 2)
(Example: 1= The file is stored in flash No.1). ASMi52 file will always be stored in Flash No.2 (intSwdlFlashIdx=2). |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.12.10.1.10 |
swdlStatusTable
table.1.3.6.1.4.1.164.6.2.12.11
·
1 row entry
·
7 columns
This parameters table is for software download status. It also includes data about the files down-loaded or attempted to be down-loaded.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
swdlStatusTypeIdx
The index of the down-load type (e.g. external (1) or internal (2)).
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.12.11.1.1 |
||||||||||||||||||||
|
swdlStatusIdx
The index of the status rows.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.12.11.1.2 |
||||||||||||||||||||
|
swdlStatusFileName
The name of the file.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.6.2.12.11.1.3 |
||||||||||||||||||||
|
swdlStatusSlot
The slot of the updated (or attempted to be updated) object.
|
SNMPv2-TCDisplayString Enumerated Values:
Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.6.2.12.11.1.4 |
||||||||||||||||||||
|
swdlStatusSubSystem
The subsystem that updated (or attempted to be updated).
|
SNMPv2-TCDisplayString Enumerated Values:
Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.6.2.12.11.1.5 |
||||||||||||||||||||
|
swdlStatusStatus
The status of the down load process.
Value: Fail (2), OK (3), InProcess (4). |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.12.11.1.6 |
||||||||||||||||||||
|
swdlStatusTime
This MIB parameter indicates the time SW download was finished.
The format shuld be YYYY-MM-DD, hh:mm:ss |
SNMPv2-TCDisplayString Enumerated Values:
Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.6.2.12.11.1.7 |
autoFileTransferTable
table.1.3.6.1.4.1.164.6.2.12.13.1
·
1 row entry
·
6 columns
Scheduling configuration table for Agent initiated file transfer.
An entry in the table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
autoFileTransferType
This object defines the type of file to be transferred
by agent. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.6.2.12.13.1.1.1 |
||||||||||||||
|
autoFileTransferServerIp
This object defines the IP Address of the
server to which the file is uploaded. |
RFC1155-SMIIpAddressr/w Enumerated Values:
Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.6.2.12.13.1.1.2 |
||||||||||||||
|
autoFileTransferFileName
This object defines the name of
the file to be uploaded. |
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Enumerated Values:
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.6.2.12.13.1.1.3 |
||||||||||||||
|
autoFileTransferScheduling
This object defines schedule for TFTP Automatic session(s)
initiated by Agent, according to the value selected: now - initiate immediate single session. recurrence- initiate single session 'eve… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.6.2.12.13.1.1.4 |
||||||||||||||
|
autoFileTransferTimeRecurrence
This object defines time reccurence interval,
e.g. M can be 'every M days', 'every M hours' etc. Zero is used to indicate there's no time reccurence (0= notApplicable). This object is taken into account only if autoF… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.12.13.1.1.5 |
||||||||||||||
|
autoFileTransferOccurrenceRecurrence
This object defines Occurrence reccurence interval,
e.g N can be in 'every N alarms', 'every N log entries' etc. zero is used to indicate There's no Event Reccurence. (0= notApplicable) This object is taken into acco… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.12.13.1.1.6 |
sntpServerTable
table.1.3.6.1.4.1.164.6.2.14.4.11
·
1 row entry
·
12 columns
This table contains parameters for each NTP Server. Entries in the table can be dynamically created. The entries created by user via sntpServerRowStatus, can also be changed or removed. The table may include also Broadcast Servers, when Broadcast Client Mode is enabled. These are Servers from which the device received timestamp by Broadcast. Their entries are automatically created by the device. Entries of these Servers cannot be changed or removed.
An entry in the NTP Server table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
sntpServerID
The number (index) of the NTP Server.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.14.4.11.1.1 |
||||||||||||||
|
sntpServerRowStatus
This object enables creation and deletion of entries
in the sntpServerTable. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.6.2.14.4.11.1.2 |
||||||||||||||
|
sntpServerAddressType
Server Address type, indicating IPv4(1) or IPv6(2).
|
INET-ADDRESS-MIBInetAddressTyper/w Textual Convention: INET-ADDRESS-MIBInetAddressType EnumerationType Values:
|
.1.3.6.1.4.1.164.6.2.14.4.11.1.3 |
||||||||||||||
|
sntpServerAddress
IP Address of the NTP Server.
|
INET-ADDRESS-MIBInetAddressr/w Textual Convention: INET-ADDRESS-MIBInetAddress OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.6.2.14.4.11.1.4 |
||||||||||||||
|
sntpServerPort
Source UDP port of the device for sending requests to
a configured NTP Server. |
INET-ADDRESS-MIBInetPortNumberr/w Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32Type Constraints: range: 0..65535 |
.1.3.6.1.4.1.164.6.2.14.4.11.1.5 |
||||||||||||||
|
sntpServerPreference
This object marks the Preferred Server.
1 = Preferred (only one Server can have this value) 2 - Not Preferred. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.14.4.11.1.6 |
||||||||||||||
|
sntpServerAdminStatus
Administrative Status of the NTP Server.
|
Enumerationr/w | .1.3.6.1.4.1.164.6.2.14.4.11.1.7 |
||||||||||||||
|
sntpServerType
Type of the NTP Server.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.6.2.14.4.11.1.8 |
||||||||||||||
|
sntpServerLastReceivedTimestamp
Last received Date and Time from the NTP Server, according to
Local Time. 0000 0000 = Not Applicable. |
SNMPv2-TCDateAndTime Textual Convention: SNMPv2-TCDateAndTime OctetStringType Constraints: range: 8range: 11 |
.1.3.6.1.4.1.164.6.2.14.4.11.1.9 |
||||||||||||||
|
sntpServerLastReceivedStratum
Last received Stratum from the NTP Server.
0xFFFFFFFF = Not Applicable. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.14.4.11.1.10 |
||||||||||||||
|
sntpServerTimeSinceLastReceivedMessage
Time passed since last received message from the NTP Server.
|
RFC1155-SMITimeTicks Textual Convention: RFC1155-SMITimeTicks Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.14.4.11.1.11 |
||||||||||||||
|
sntpServerSendRequestNow
Upon setting this parameter to 'on', an immediate request
should be sent to the specified NTP Server. After sending the request, the value 'off' will be resumed. No action when setting this parameter to 'off' |
Enumerationr/w | .1.3.6.1.4.1.164.6.2.14.4.11.1.12 |
schedXTable
table.1.3.6.1.4.1.164.6.2.14.5
·
1 row entry
·
3 columns
An Augment to the Schedule table (schedTable in DISMAN-SCHEDULE-MIB; RFC-3231).
An entry in the table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
schedYear
The year during which the scheduled action should take place.
|
SNMPv2-SMIUnsigned32r/w Constraints: range: 0-86400Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.14.5.1.1 |
||||||||||||||
|
schedWeekInMonth
The week in month (schedMonth) during which the scheduled action
should take place. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.6.2.14.5.1.2 |
||||||||||||||
|
schedParam
A Parameter that might be used whenever the scheduled action takes place.
For summer-time schedule - This variable represents the time offset (in minutes), meaning: the number of minutes that should be ad… |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.14.5.1.3 |
physicalConnectorTable
table.1.3.6.1.4.1.164.6.2.15.1
·
1 row entry
·
10 columns
This table includes the connector type of ports or interfaces.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
portIdx
This object is an index of the specific port or interface.
For a port, the index will be as agreed between agent and application. For an interface, ifIndex may be used. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.1.1.1 |
||||||
|
physicalConnector
The connector of the port/interface.
other - none of the specified connectors none - no connector. |
Enumeration | .1.3.6.1.4.1.164.6.2.15.1.1.2 |
||||||
|
portOptWaveLength
Wave Length of an Optical interface/port in [nm] and specification if
Laser or not. notApplicable - for non-optical ports. |
Enumeration | .1.3.6.1.4.1.164.6.2.15.1.1.3 |
||||||
|
portOptMode
Laser Mode of an Optical Laser interface/port.
notApplicable - for non-Laser ports. |
Enumeration | .1.3.6.1.4.1.164.6.2.15.1.1.4 |
||||||
|
portBalance
This object is according to the port Impedance.
For T1 - always balanced. For E1 - there are different impedance values for balanced and unbalanced. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.6.2.15.1.1.5 |
||||||
|
portDdmSupport
SFP (Small Form Pluggable) port -support
Digital Diagnostics Monitoring. |
Enumeration | .1.3.6.1.4.1.164.6.2.15.1.1.6 |
||||||
|
portMfgName
(SFP) Port Manufacturer name
(Maximum - 16 characters). |
SNMP-FRAMEWORK-MIBSnmpAdminString Enumerated Values:
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.6.2.15.1.1.7 |
||||||
|
portTypicalMaxRange
Maximum range supported by SFP port,
in meter units. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.15.1.1.8 |
||||||
|
physicalConnectorString
(SFP) connector type. It can be Vendor Specific
(unknown in advance). Being a string, the object is not affected by any future new connectors. This object will usually not be used for drawing the connector. |
SNMP-FRAMEWORK-MIBSnmpAdminString Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.6.2.15.1.1.9 |
||||||
|
portVendorPartNo
SFP Vendor Part Number. Being a string, the object is not
affected by any future new SFPs. |
SNMP-FRAMEWORK-MIBSnmpAdminString Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.6.2.15.1.1.10 |
prtSpTable
table.1.3.6.1.4.1.164.6.2.15.2.1
·
1 row entry
·
11 columns
A table.
Supervisory port parameter table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtSupervisoryIndex
The SP port index.
For some products, having modules (cards): The LS byte of the integer is the port index 1..255. The MS byte is different than 0 only if the port belongs to a module. In that case it is the module n… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.2.1.1.1 |
||||||||||||||||
|
prtSupervisoryRate
This attribute indicates the operation rate (speed) of the
port. auto - automatic rate selection, by the agent. |
Enumerationr/w | .1.3.6.1.4.1.164.6.2.15.2.1.1.2 |
||||||||||||||||
|
prtSupervisoryDataBits
This attribute indicates the number of data bits in an async
frame |
Enumerationr/w | .1.3.6.1.4.1.164.6.2.15.2.1.1.3 |
||||||||||||||||
|
prtSupervisoryParity
This attribute indicates the parity mode in an async frame
|
Enumerationr/w | .1.3.6.1.4.1.164.6.2.15.2.1.1.4 |
||||||||||||||||
|
prtSupervisoryStopBits
This attribute indicates the parity mode in an async frame.
|
Enumerationr/w | .1.3.6.1.4.1.164.6.2.15.2.1.1.5 |
||||||||||||||||
|
prtSupervisoryUsage
This attribute indicates the usage of the SP port.
|
Enumerationr/w | .1.3.6.1.4.1.164.6.2.15.2.1.1.6 |
||||||||||||||||
|
prtSupervisoryInterface
This attribute indicates the supervisory port interface.
|
Enumerationr/w | .1.3.6.1.4.1.164.6.2.15.2.1.1.7 |
||||||||||||||||
|
prtSupervisoryCTS
CTS line state.
|
Enumerationr/w | .1.3.6.1.4.1.164.6.2.15.2.1.1.8 |
||||||||||||||||
|
prtSupervisoryDcdDelay
DCD delay in msec.
|
Enumerationr/w | .1.3.6.1.4.1.164.6.2.15.2.1.1.9 |
||||||||||||||||
|
prtSupervisoryDSR
DSR line state.
|
Enumerationr/w | .1.3.6.1.4.1.164.6.2.15.2.1.1.10 |
||||||||||||||||
|
prtSupervisoryRoutProtocol
This attribute indicates the routing protocol of the port.
notApplicable - for DP. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.6.2.15.2.1.1.11 |
prtPerfTable
table.1.3.6.1.4.1.164.6.2.15.3.1
·
1 row entry
·
10 columns
This table includes G.826 ports or interfaces.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtPerfIdx
This object is an index of the specific port or interface.
For a port, the index will be as agreed between agent and application. For an interface, ifIndex may be used. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.3.1.1.1 |
||||||||||||||||||||||||||||
|
prtPerfPeriodRef
This object is an index that specifies which period of time, the next
5 objects refer to. currentPeriod - the period since last prtPerfSaveAndResetCmd received or since Start-up (if no prtPerfSaveAndResetCmd w… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.6.2.15.3.1.1.2 |
||||||||||||||||||||||||||||
|
prtPerfElapsedTime
Elapsed Time in seconds.
- for prtPerfPeriodRef=currentPeriod: The period since last prtPerfSaveAndResetCmd received or since Start-up (if no prtPerfSaveAndResetCmd was received since Start-up) until now. - for prt… |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.3.1.1.3 |
||||||||||||||||||||||||||||
|
prtPerfUAS
Number of Unavailable Seconds for the reference period (prtPerfPeriodRef).
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.3.1.1.4 |
||||||||||||||||||||||||||||
|
prtPerfES
Number of Errored Seconds for the reference period (prtPerfPeriodRef).
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.3.1.1.5 |
||||||||||||||||||||||||||||
|
prtPerfSES
Number of Severely Errored Seconds for the reference period (prtPerfPeriodRef).
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.3.1.1.6 |
||||||||||||||||||||||||||||
|
prtPerfBBE
Number of Background Block (or Frame) Errors for the reference period
(prtPerfPeriodRef). |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.3.1.1.7 |
||||||||||||||||||||||||||||
|
prtPerfBlocksPerSec
Blocks per second (or frames per second) of the port/interface indicated by
portIdx. This object is constant for a certain port/interface. It is not affected by the prtPerfPeriodRef index. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.3.1.1.8 |
||||||||||||||||||||||||||||
|
prtPerfTimeTag
Time Tag of Last Period: sysUpTime when last prtPerfSaveAndResetCmd was
executed. This object is applicable only for prtPerfPeriodRef=lastPeriod. For prtPerfPeriodRef=currentPeriod, the value will always be 0. |
RFC1155-SMITimeTicks Constraints: range: 1-1Textual Convention: RFC1155-SMITimeTicks Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.15.3.1.1.9 |
||||||||||||||||||||||||||||
|
prtPerfSaveAndResetCmd
A command per port/interface, to Save data of Current Period in Last Period
data-set and start a new counting period for Current Period. This object is applicable only for prtPerfPeriodRef=currentPeriod. Setting this ob… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.6.2.15.3.1.1.10 |
prtTestTable
table.1.3.6.1.4.1.164.6.2.15.4.1
·
1 row entry
·
27 columns
This table includes test data for ports or interfaces.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtTestIdx
This object is an index of the specific port or interface.
For a port, the index will be as agreed between agent and application. For an interface, ifIndex may be used. |
SNMPv2-SMIInteger32 Constraints: range: 1-1Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.4.1.1.1 |
||||||||||
|
prtTestCmdAndStatus
Setting this object to a value as detailed further on
(except 0) will initiate a test on the specific port. The test/s requested will be set according to the respective bit. The value of this object will be a sum of (… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.4.1.1.2 |
||||||||||
|
prtBertCounter
This object indicates the number of BERT errors encountered
during the BERT operation. It is valid only when BERT (Bit Error Rate Test) is active on the specific port. The Counter starts from zero (0) anytime BERT is i… |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.4.1.1.3 |
||||||||||
|
prtTestInitiator
This object indicates who initiated this port's test/s.
|
Enumeration | .1.3.6.1.4.1.164.6.2.15.4.1.1.4 |
||||||||||
|
prtTestTimeout
This object is applicable only when a single
test is running. It indicates the test activation timeout in minutes. For RICi-E1T1, RICi-E3T3 and LRS-16, the measurement unit is in seconds. When the timeout expires, the… |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.6.2.15.4.1.1.5 |
||||||||||
|
prtTestVctRxResult
This object indicates the result of the Vct on
the cable connected to the RX connector. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.6.2.15.4.1.1.6 |
||||||||||
|
prtTestVctTxResult
This object indicates the result of the Vct on
the cable connected to the TX connector. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.6.2.15.4.1.1.7 |
||||||||||
|
prtTestVctRxDistance
This object indicates the distance in Meters
to the RX cable Open/ Short location discovered by the Vct. This parameter is applicable for Vct Result = Normal or Fail only, Else the value of this parameter will be equa… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.4.1.1.8 |
||||||||||
|
prtTestVctTxDistance
This object indicates the distance in Meters
to the TX cable Open/ Short location discovered by the Vct. This parameter is applicable for Vct Result = Normal or Fail only, Else the value of this parameter will be equa… |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.4.1.1.9 |
||||||||||
|
prtTestVctCmd
Vct command.
on (3) = Start Vct on both cables connected to RX and TX connectors of this port. Agent will perform the required command and change automatically the value of this object to off(2). |
Enumerationr/w Constraints: range: 0-9 |
.1.3.6.1.4.1.164.6.2.15.4.1.1.10 |
||||||||||
|
prtTestVctRxCrossPair
This object should be equal to the Index (prtTestIdx) of the Rx cross pair.
This object is applicable only for Vct Result = shortToCrossPair or coupleWithCrossPair. This object was especially created for ETX-202. Curre… |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.4.1.1.11 |
||||||||||
|
prtTestVctTxCrossPair
This object should be equal to the Index (prtTestIdx) of the Tx cross pair.
This object is applicable only for Vct Result = shortToCrossPair or coupleWithCrossPair. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.4.1.1.12 |
||||||||||
|
prtTestActivationDelay
This object is applicable only when a single test is running.
It indicates test activation delay in seconds. A Value of 0 indicates that the test starts immediately. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.15.4.1.1.13 |
||||||||||
|
prtTestMacSwapLoopDataMode
This object defines which part
of the data will be looped back. |
Enumerationr/w | .1.3.6.1.4.1.164.6.2.15.4.1.1.14 |
||||||||||
|
prtTestMacSwapLoopVlanId
This object specifies the VLAN ID for
prtTestMacSwapLoopDataMode=specificVlan. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.4.1.1.15 |
||||||||||
|
prtTestMacSwapLoopDirection
This object defines the direction of the performed loopback.
In ETX102 'local' corresponds to Ingress loop (either on User port or on Network port), and 'remote' corresponds to Egress loop (either on User port or on Net… |
Enumerationr/w | .1.3.6.1.4.1.164.6.2.15.4.1.1.16 |
||||||||||
|
prtTestMacSwapLoopDestAddr
Configures the MAC address that will be sent in the
Destination field of the packet in the outgoing direction. |
MacAddressr/w Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.6.2.15.4.1.1.17 |
||||||||||
|
prtTestMacSwapLoopSrcAddr
Configures the MAC address that will be sent in the
Source field of the packet in the outgoing direction. |
MacAddressr/w Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.6.2.15.4.1.1.18 |
||||||||||
|
prtTestOamMinRoundTripDelay
The mininal value of round trip delay of loopback message for a session of
OAM loopback.Units are msec. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.15.4.1.1.19 |
||||||||||
|
prtTestOamMaxRoundTripDelay
The maximum value of round trip delay of loopback message for a session of
OAM loopback.Units are msec. |
SNMPv2-SMIUnsigned32 Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.15.4.1.1.20 |
||||||||||
|
prtTestOamAvgRoundTripDelay
The average round trip delay of loopback message for a session of
OAM loopback.Units are msec. |
SNMPv2-SMIUnsigned32 Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.15.4.1.1.21 |
||||||||||
|
prtTestOamTxInterval
Indicates the interval between loopback sent messages.Units are msec.
|
SNMPv2-SMIUnsigned32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.15.4.1.1.22 |
||||||||||
|
prtTestDestinationIpAddress
Indicates the destination IP Address in the transmitted messages that
are looped back. |
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.6.2.15.4.1.1.23 |
||||||||||
|
prtTestForceTTL
Time-to-live.Number of hops the loopback message will go through the net
before deciding to discard it. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.15.4.1.1.24 |
||||||||||
|
prtTestBwProfile
deprecated
Indicates the BW profile (from bwProfileTable) that is assigned to the loopback test
in order to limit the traffic that is looped back. |
SNMPv2-SMIUnsigned32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.15.4.1.1.25 |
||||||||||
|
prtTestSourceIpAddress
Indicates the source IP Address in the transmitted messages that
are looped back. |
RFC1155-SMIIpAddressr/w Enumerated Values:
Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.6.2.15.4.1.1.26 |
||||||||||
|
prtTestRemainTime
Indicates the remain time for test activation
in seconds. |
SNMPv2-SMIUnsigned32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.15.4.1.1.27 |
prtParamTable
table.1.3.6.1.4.1.164.6.2.15.5.1
·
1 row entry
·
28 columns
This table includes general port parameters. The meaning is
different for every product that supports it due to a general
parameter - prtControlCnfg.
For ACE2002:
-This table is used as a mechanism to create the next interface index.
The algorithm description:
The NMS will send the agent the following get command: get(nextIfIndex.index),
where index=interface on which the new index is dependent on.
Upon this command the agent will generate and return the new index to the NMS.
- This table is partially supported according to the interface type.
Upon getNext function the irrelevant parameters will be skipped.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtParamIdx
This object is an index of the specific port or interface.
For a port, the index will be as agreed between agent and application. For an interface, ifIndex may be used. For ACE2002: This parameter is the… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.5.1.1.1 |
||||||||||||
|
prtControlCnfg
This object may be used for port RW general parameter/s.
For detailed meaning, see product's spec. Supported by: PRBi-E3/T3. For ACE2002: This parameter will include the value of the new index generated … |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.5.1.1.2 |
||||||||||||
|
prtParamClkSrc
The source of Transmit Clock.
'loopTiming' or 'loopback' indicates that the recovered receive clock is used as the transmit clock. 'localTiming' or 'internal' indicates that a local clock source is use… |
Enumerationr/w | .1.3.6.1.4.1.164.6.2.15.5.1.1.3 |
||||||||||||
|
prtParamPhantom
Power feeding to another device.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.6.2.15.5.1.1.4 |
||||||||||||
|
prtParamResetStatsCmd
Reset statistics of the selected port.
|
Enumerationr/w | .1.3.6.1.4.1.164.6.2.15.5.1.1.5 |
||||||||||||
|
prtParamLastResetStatsTime
The value of MIB II's sysUpTime object at the last time that
prtParamResetStatsCmd was Set to on(3) for this port. If prtParamResetStatsCmd was never Set to on(3) since last re-initialization of the agent, then this… |
SNMPv2-TCTimeStamp Enumerated Values:
Textual Convention: SNMPv2-TCTimeStamp Unsigned32 |
.1.3.6.1.4.1.164.6.2.15.5.1.1.6 |
||||||||||||
|
prtParamInterfaceType
The type of the port.
|
Enumerationr/w | .1.3.6.1.4.1.164.6.2.15.5.1.1.7 |
||||||||||||
|
prtParamClearAlarm
Setting this attribute to ON, will enforce a clear
operation on the Port Alarms. Upon completion, the value will automatically change to off(2). |
Enumerationr/w | .1.3.6.1.4.1.164.6.2.15.5.1.1.8 |
||||||||||||
|
prtParamLeds
This entry specifies the LEDs status of the port.
Each led is represented by 4 bits where the first 2 bits (left) specify the status : (00=NA, 01=OFF, 10=ON, 11=BLINK), and the next two bits (right) specify the color :… |
OctetString | .1.3.6.1.4.1.164.6.2.15.5.1.1.9 |
||||||||||||
|
prtParamLineLength
Line Length of the line connected to this port.
|
Enumerationr/w | .1.3.6.1.4.1.164.6.2.15.5.1.1.10 |
||||||||||||
|
prtParamUsage
Defines whether this port works as User port or as Network port.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.6.2.15.5.1.1.11 |
||||||||||||
|
prtParamMappingMode
This object defines path protection on SONET/SDH link
Auto - SONET/SDH mapping for port is copied automatically to same TU on the redundant SONET/SDH local (reside on same slot) link by agent. Manual - the user can con… |
Enumerationr/w | .1.3.6.1.4.1.164.6.2.15.5.1.1.12 |
||||||||||||
|
prtParamAlarmIndication
This object indicates status-aggregation of non-masked alarms
associated with all interface layers, related to this physical port. When at least one non-masked alarm exists on any layer, value of this object is on (3)… |
Enumeration | .1.3.6.1.4.1.164.6.2.15.5.1.1.13 |
||||||||||||
|
prtParamClkQualityLevel
This parameter indicates quality level of clock signal.
Quality is encoded according to SSM (Synchronization Status Messages) encoding. Bits 8 -5 of byte are encoded as follows (when bit1=0): Left most bit - M… |
OctetString Enumerated Values:
|
.1.3.6.1.4.1.164.6.2.15.5.1.1.14 |
||||||||||||
|
prtParamClkWaveShape
Wave shape of station clock source signal.
|
Enumerationr/w | .1.3.6.1.4.1.164.6.2.15.5.1.1.15 |
||||||||||||
|
prtParamStatus
Station clock source Status.
|
Enumeration | .1.3.6.1.4.1.164.6.2.15.5.1.1.16 |
||||||||||||
|
prtParamSignalLevel
This object indicates signal level (in thenth of dB units)
on selected port. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.5.1.1.17 |
||||||||||||
|
prtParamClkUserQualityLevel
This parameter allows user to mark quality level of clock.
Quality is encoded according to SSM (Synchronization Status Messages) encoding. Bits 8 -5 of byte are encoded as follows: Left most bit - MSB(8) ---> LSB(5) 8… |
OctetStringr/w | .1.3.6.1.4.1.164.6.2.15.5.1.1.18 |
||||||||||||
|
prtParamDataRate
Rate of serial data port (V.11, V.24, V.35)
in kbps units. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.15.5.1.1.19 |
||||||||||||
|
prtParamLoopDetect
Enable/disable Loop Detection on a port.
Examples of ports: physical, Channelized Bundle over TDM Uplink, Bridge Ports. |
Enumerationr/w | .1.3.6.1.4.1.164.6.2.15.5.1.1.20 |
||||||||||||
|
prtParamActUponLoopDetect
This parameter is used to indicate which actions
should be taken in case a loop is detected in the network the port is part of. Each action is represented by a bit. Currently defined (for RIC155GE/RIC622GE): Bit 0 - Tra… |
OctetStringr/w | .1.3.6.1.4.1.164.6.2.15.5.1.1.21 |
||||||||||||
|
prtParamPSNLayer
This object indicates the network layer from which clock is derived.
|
Enumerationr/w | .1.3.6.1.4.1.164.6.2.15.5.1.1.22 |
||||||||||||
|
prtParamRxSsm
This object indicates if Station Clock SSM messages
received will serve as criteria for clock selection. |
Enumerationr/w | .1.3.6.1.4.1.164.6.2.15.5.1.1.23 |
||||||||||||
|
prtParamClkSsmRxSource
This object indicates the Sa-bit of the E1 frame,
in which SSM messages are carried. |
Enumerationr/w | .1.3.6.1.4.1.164.6.2.15.5.1.1.24 |
||||||||||||
|
prtParamFarEndDevice
Programmed Far-End device connected to this port.
This object is relevant for products having multiple DBs. It will enable configuring offline, the relevant data. For MP-4100, LRS-102 OP-108/106 cards, the options w… |
SNMPv2-SMIUnsigned32r/w Constraints: range: 1-255Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.15.5.1.1.26 |
||||||||||||
|
prtParamTxClk
enable/disable station clock signal output.
|
Enumerationr/w | .1.3.6.1.4.1.164.6.2.15.5.1.1.27 |
||||||||||||
|
prtParamSdBerThreshold
The Signal Degrade Bit Error Rate Threshold.
The negated value of this number is used as the exponent of 10 for computing the threshold value for the Bit Error Rate (BER). For example, a value of 5 indicates a BER thres… |
Unsigned32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.6.2.15.5.1.1.28 |
||||||||||||
|
prtParamLoopDetectStatus
This object shows whether a loop was detected on the current port.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.6.2.15.5.1.1.29 |
prtIpParamTable
table.1.3.6.1.4.1.164.6.2.15.6.1
·
1 row entry
·
38 columns
A table - Parameters for IP Ports.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtIpParamConfigIdx
This object indicates the Configuration number (1..255)
referred. Value of 255 specifies the TmpCnfg (Scratch). For products having Agent and Edit configurations, Write operation for the table entries is allowed only … |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.6.1.1.1 |
||||||||||||||||
|
prtIpParamSlotIdx
This object indicates a unique number of the slot position
in which the module is inserted. notApplicable = 255 (for products that don't have slots). For KM: kmxMlA (103), kmxMlB (104). |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.6.1.1.2 |
||||||||||||||||
|
prtIpParamIdx
This object indicates a unique Port Index.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.6.1.1.3 |
||||||||||||||||
|
prtIpParamHostIP
The host interface IP address.
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.6.2.15.6.1.1.4 |
||||||||||||||||
|
prtIpParamHostMask
The host interface subnet mask.
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.6.2.15.6.1.1.5 |
||||||||||||||||
|
prtIpParamDefaultGateway
Default Gateway's IP Address.
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.6.2.15.6.1.1.6 |
||||||||||||||||
|
prtIpParamMediaMode
This object indicates the real Media Mode.
|
Enumeration | .1.3.6.1.4.1.164.6.2.15.6.1.1.7 |
||||||||||||||||
|
prtIpParamMediaRate
This object indicates the real Media Rate (Mbps).
|
Enumeration | .1.3.6.1.4.1.164.6.2.15.6.1.1.8 |
||||||||||||||||
|
prtIpParamMngVlanSupport
Management VLAN support (Tagging).
no - No support of VLAN Tagging. yes - 4 VLAN bytes will be added to the frame. |
Enumerationr/w | .1.3.6.1.4.1.164.6.2.15.6.1.1.9 |
||||||||||||||||
|
prtIpParamMngVlanId
Management VLAN ID.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.6.1.1.10 |
||||||||||||||||
|
prtIpParamMngVlanPriority
Management VLAN Frame priority.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.6.1.1.11 |
||||||||||||||||
|
prtIpParamRingMode
This object indicates If Ring Mode is enabled or not.
|
Enumerationr/w | .1.3.6.1.4.1.164.6.2.15.6.1.1.12 |
||||||||||||||||
|
prtIpParamProtIpEnable
This object indicates whether a list of Protected IP Addresses
is enabled or not. This object is applicable only if prtIpParamRingMode=enable. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.6.2.15.6.1.1.13 |
||||||||||||||||
|
prtIpParamTrafficPriority
This object indicates the traffic priority of this port.
|
Enumerationr/w | .1.3.6.1.4.1.164.6.2.15.6.1.1.14 |
||||||||||||||||
|
prtIpParamRemoteIP
This is the IP Address of the remote device that is connected to the
current device (Point to Point Application). It is used for sending OAM packets on the LAN to the remote side in order to check that the connection is… |
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.6.2.15.6.1.1.15 |
||||||||||||||||
|
prtIpParamMaxTxBandwidth
This object shows the Max Bandwidth allowed on the LAN.
Full - means that a Maximum of 100 Mega Byte Rate may go through the LAN. e1(3) means that the maximum is an E1 rate. t1(4) is for a maximum of a T1 rate. |
Enumerationr/w | .1.3.6.1.4.1.164.6.2.15.6.1.1.16 |
||||||||||||||||
|
prtIpParamTos
TOS = Type of Service transmitted.
Valid values: 0..255. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.6.1.1.17 |
||||||||||||||||
|
prtIpParamConnect
Port Connection.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.6.2.15.6.1.1.18 |
||||||||||||||||
|
prtIpParamAgingTime
Aging Time in seconds.
|
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.6.1.1.19 |
||||||||||||||||
|
prtIpParamEncapsulationProt
Encapsulation Protocol.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.6.2.15.6.1.1.20 |
||||||||||||||||
|
prtIpParamEncapProtPort
Encapsulation Protocol Port (TCP/UDP Port).
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.6.1.1.21 |
||||||||||||||||
|
prtIpParamVlanSupport
VLAN support (Tagging).
'no' - No support of VLAN Tagging. 'yes' - 4 VLAN bytes will be added to the frame. |
Enumerationr/w | .1.3.6.1.4.1.164.6.2.15.6.1.1.22 |
||||||||||||||||
|
prtIpParamVlanId
VLAN Identifier.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.6.1.1.23 |
||||||||||||||||
|
prtIpParamVlanPriority
VLAN Frame priority.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.6.1.1.24 |
||||||||||||||||
|
prtIpParamDoubleTagVlanId
VLAN Identifier of the Double Tagging VLAN.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.6.1.1.25 |
||||||||||||||||
|
prtIpParamDoubleTagVlanPriority
VLAN Frame priority of the Double Tagging VLAN.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.6.1.1.26 |
||||||||||||||||
|
prtIpParamVlanTagging
VLAN Tagging.
'unmodified' - No change will be done to the Frame. 'tag' - Add Tag to Untagged Frames. 'doubleTag' - Add Tag to all Frames. 'doubleTagAndFallBack' - Double Tagging will have different rules for VLANs th… |
Enumerationr/w | .1.3.6.1.4.1.164.6.2.15.6.1.1.27 |
||||||||||||||||
|
prtIpParamRateLimit
The maximum rate permitted to transfer via this port, in Kbps.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.6.1.1.28 |
||||||||||||||||
|
prtIpParamDefInterface
The Default Interface for packets with unresolved destination subnet.
For internal-X port: 100 + X . |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.6.1.1.29 |
||||||||||||||||
|
prtIpParamMng
This object indicates whether Management is enabled/disabled
via this port. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.6.2.15.6.1.1.30 |
||||||||||||||||
|
prtIpParamFloodedRateLimit
The maximum rate permitted to transfer broadcast, multicast,
and unicast flooded frames via this port, in Kbps. 0 - Disable. In Ipmux14 this parameter is applicable when prtIpParamRateLimit=0 (disable). |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.6.1.1.31 |
||||||||||||||||
|
prtIpParamBurstSize
The burst size that the port can support beyond rate limitation
determined in prtIpParamRateLimit. Burst Size is measured in bytes. |
SNMPv2-SMIUnsigned32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.15.6.1.1.32 |
||||||||||||||||
|
prtIpParamLimitPacketType
The packet type that will be rate limited. Rate limitation
determined in prtIpParamRateLimit. all - All packet types are rate limited. broadMultiFloodedUnicast - Broadcast, Multicast and Flooded Unicast packets are r… |
Enumerationr/w Constraints: range: 1-4 |
.1.3.6.1.4.1.164.6.2.15.6.1.1.33 |
||||||||||||||||
|
prtIpParamKeepAliveInterval
This parameter indicates the period of time (in msec.)
between two consequent Keep Alive messages. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.6.1.1.34 |
||||||||||||||||
|
prtIpParamKeepAliveThresh
This parameter indicates the maximum number of
missed Keep Alive answer messages acceptable, after which link status will be failed. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.6.1.1.35 |
||||||||||||||||
|
prtIpParamP2pKeepAliveVlanId
Dedicated VLAN ID for keep alive messages.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.6.1.1.36 |
||||||||||||||||
|
prtIpParamP2pKeepAliveVlanPrio
VLAN priority for P2P keep alive messages .
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.6.1.1.37 |
||||||||||||||||
|
prtIpParamRingAdjacentMacAddr
The MAC address of the adjacent NE connected to this port in an ETH ring.
If the port is not a member of a ring, the value of this parameter will be 00-00-00-00-00-00. |
MacAddress Enumerated Values:
Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.6.2.15.6.1.1.38 |
prtClkSrcTable
table.1.3.6.1.4.1.164.6.2.15.7.1
·
1 row entry
·
5 columns
A table - Parameters for master and fallback clock source of ports .
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
prtClkSrcCnfgIdx
This attribute indicates the Idx of the Cnfg(1..255) being
accessed ; Idx of 255 relates to the TmpCnfg. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.6.2.15.7.1.1.1 |
||||||||||||
|
prtClkSrcPrtIdx
This object indicates a unique Port Index (receiving clock).
Refer to device specification for port Index |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.7.1.1.2 |
||||||||||||
|
prtClkSrcIdx
An index in the table.
master - refers Master clock parameters fallback - refers Fallback clock parameters |
Enumeration | .1.3.6.1.4.1.164.6.2.15.7.1.1.3 |
||||||||||||
|
prtClkSrcMode
This entry indicates the source the nodal timing is
locked to. |
Enumerationr/w | .1.3.6.1.4.1.164.6.2.15.7.1.1.4 |
||||||||||||
|
prtClkSrcPrt
This entry is valid only when working in rxClk mode.
It specifies the port from which the clock willl be taken. Refer to device specification for source port Index |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.7.1.1.5 |
optPrtMonitorTable
table.1.3.6.1.4.1.164.6.2.15.8.1
·
1 row entry
·
7 columns
A table - optical port (e.g SFP) monitoring parameters, according to SFF-8472 Specification for Diagnostic Monitoring Interface for Optical Xcvrs. and ITU-T rec. G.958
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
optPrtMonitorPrtIdx
This object indicates a unique (optical) Port Index .
Refer to device specification for port Index. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.8.1.1.1 |
|
optPrtMonitorSample
This index indicates historic and current values -
minimum, maximum and actual (current) value. |
Enumeration | .1.3.6.1.4.1.164.6.2.15.8.1.1.2 |
|
optPrtMonitorTxPower
Transmitted optical power level.
Value is given in units of hundredth (1/100) of dBm. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.8.1.1.3 |
|
optPrtMonitorLaserBias
LASER bias current level.
Value is given in units of microAmper (uA). |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.8.1.1.4 |
|
optPrtMonitorLaserTemp
LASER temperature level,
in hundredth (1/100) (C) degrees. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.8.1.1.5 |
|
optPrtMonitorRxPower
Received optical power in units of hundredth (1/100) of dBm.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.8.1.1.6 |
|
optPrtMonitorSupplyVoltage
Supply voltage, in hundredth (1/100) of volts (V).
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.15.8.1.1.7 |
optPrtCnfgTable
table.1.3.6.1.4.1.164.6.2.15.8.2
·
1 row entry
·
3 columns
A table - optical port configuration
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
optPrtCnfgIdx
This attribute indicates the Idx of the Cnfg(1..255) being
accessed ; Idx of 255 relates to the TmpCnfg.x. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.15.8.2.1.1 |
|
optPrtCnfgPrtIdx
This object indicates a unique (optical) Port Index .
Refer to device specification for port Index. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.15.8.2.1.2 |
|
optPrtCnfgALS
enable/disable Automatic Laser Shutdown
|
Enumerationr/w | .1.3.6.1.4.1.164.6.2.15.8.2.1.3 |
systemPsTable
table.1.3.6.1.4.1.164.6.2.25
·
1 row entry
·
5 columns
This table describes the PS types of a device. Usage of this table is specified in the device's NMS SRS
An entry in table.
Indexes
systemOamCnfgIdx
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
systemPsIndex1
First Index.
In HUBs: 1 = PS-A slot 2 = PS-B slot 3 = PS-C slot. In SA units: 1 = PS1 2 = PS2 Default = 1 |
SNMPv2-SMIInteger32 Constraints: range: 1-255Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.25.1.1 |
||||
|
systemPsIndex2
Second Index.
In HUBs: 1 always. In SA units: 1 = Local 2 = Remote Default = 1. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.25.1.2 |
||||
|
systemPsType
The type of PS, for a stand-alone product.
acDc - PS that supports both AC and DC. acPF - Power Feeding (phantom) box that is feeding another box by external AC. dcPF - Power Feeding (phantom) box that is feeding anothe… |
Enumeration | .1.3.6.1.4.1.164.6.2.25.1.3 |
||||
|
systemPsStatus
The Status of the PS unit.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.6.2.25.1.4 |
||||
|
systemPsHotSwap
Is PS unit hot swap or fixed.
|
Enumeration | .1.3.6.1.4.1.164.6.2.25.1.5 |
xcTable
table.1.3.6.1.4.1.164.6.2.31
·
1 row entry
·
12 columns
Configuration of system cross-connect entries. The table follows the behavior described in RFC 2515, RFC 1604 regarding the creation deletion and modification of an entry within the table.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
xcIndex
Cross Connect Identifier.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.31.1.1 |
||||||||||||
|
xcIfIndex1
The interface Index from the ifTable, which identify one side
of the connection. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.31.1.2 |
||||||||||||
|
xcVpi
The VPI value.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.31.1.3 |
||||||||||||
|
xcVci
The VCI value.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.31.1.4 |
||||||||||||
|
xcIfIndex2
The interface Index from the ifTable, which identifies the other
side of the connection. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.31.1.5 |
||||||||||||
|
xcRowStatus
This parameter allows NMS to create/delete entries of this table.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.6.2.31.1.6 |
||||||||||||
|
xcDescr
A textual string containing information about the
xc entry. |
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.6.2.31.1.7 |
||||||||||||
|
xcAdminStatus
The desired administrative status of this
bi-directional cross-connect. |
Enumerationr/w | .1.3.6.1.4.1.164.6.2.31.1.8 |
||||||||||||
|
xcOperStatus
The operational status of this bi-directional
cross-connect. |
Enumeration | .1.3.6.1.4.1.164.6.2.31.1.9 |
||||||||||||
|
xcAttachedIfType
This object indicates if the specific VCC is
already attached to any interface, and indicates the type of the interface. This object's purpose is to ease the checking to the NMS. notApplicable - used for entries that a… |
Enumeration | .1.3.6.1.4.1.164.6.2.31.1.10 |
||||||||||||
|
xcInputPriority
This object is the priority, by which the LAN frames will be
internaly sent to the ATM HW. This parameter is applicable if atmNteMdlInputPriorityMechanism=enabled. 1 - Highest priority. Will be the fir… |
Integer32r/w | .1.3.6.1.4.1.164.6.2.31.1.11 |
||||||||||||
|
xcBitMapping
This object maps this entry to a bit of an octet string.
For ACE2002 this object maps the LAN VCC to the bit of the VLAN Port Lists. If the value is '0' then it means that this VCC is not mapped to a port list or it m… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.31.1.12 |
modlParamTable
table.1.3.6.1.4.1.164.6.2.32.1.1
·
1 row entry
·
6 columns
This table include parameters for system modules.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
modlParamIndex
The module index.
The index can be the slot number or any other module index as described in the specifications of the device. For Vmux-2100 device, the index will have values of: 1..4 for slots 1..4. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.32.1.1.1.1 |
|
modlParamReset
Reset action to be performed on the module.
Set the parameter will be done always to on(3) or factory (4). After performing the Reset operation, Agent will automatically set the parameter to off(2). |
Enumerationr/w | .1.3.6.1.4.1.164.6.2.32.1.1.1.2 |
|
modlParamSwdlStatus
This parameter indicates whatever the swdl is in process or not.
|
Enumeration | .1.3.6.1.4.1.164.6.2.32.1.1.1.3 |
|
modlParamLeds
This entry specifies the LEDs status of the module.
Each led is represented by 4 bits where the first 2 bits (left) specify the status : (00=NA, 01=OFF, 10=ON, 11=BLINK), and the next two bits (right) specify the color… |
OctetString | .1.3.6.1.4.1.164.6.2.32.1.1.1.4 |
|
modlParamType
This attribute indicates the Module Type.
|
Enumeration | .1.3.6.1.4.1.164.6.2.32.1.1.1.5 |
|
modlParamSwVer
This attribute indicates the Module's Software Version.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.6.2.32.1.1.1.6 |
ifCreateTable
table.1.3.6.1.4.1.164.6.2.35.1
·
1 row entry
·
9 columns
The Interface Configuration Table. This table enables to create interfaces of Entities.
An entry in the Interface Configuration table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ifCreateEntityType
This object indicates the Type of the Entity that exists above the created interface.
For a Logical Port, this value can be: other (1) when there is no fixed entity above it. |
SysIfEntityType Textual Convention: ACE2002-MIBSysIfEntityType EnumerationType Values:
|
.1.3.6.1.4.1.164.6.2.35.1.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
ifCreateEntityIdx
This object indicates the Index of the Entity that exists above the created interface.
For a Logical Port, this value can be: 9999 - N/A when there is no fixed entity above it. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.35.1.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
ifCreateNumber
This object indicates the number of the Interface that is created.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.35.1.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
ifCreateRowStatus
This object enables the user to
create/delete entries in this table. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.6.2.35.1.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
ifCreateType
This object indicates the Type of the Interface that is created.
|
IANAifType-MIBIANAifTyper/w Constraints: range: 1-64Textual Convention: IANAifType-MIBIANAifType EnumerationType Values:
|
.1.3.6.1.4.1.164.6.2.35.1.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
ifCreateIndex
This object indicates the ifIndex of the created Interface.
The ifIndex is assigned by the device. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.35.1.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
ifCreateConnectedTo
This object indicates the entity connected to the created Interface.
The value of this object can be ifIndex of the connected entity or any other number that can identify it. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.35.1.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
ifCreateParams
This object represents one or more parameters of the created Interface.
Each group of bits (one or more bits) represents a specific parameter and its possible values. This object's mapping and interpretation will be spe… |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.35.1.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
ifCreateConnectionPointer
This parameter represents the entity that is connected
to this Interface. It can be used instead of ifCreateConnectedTo. It is an OBJECT IDENTIFIER. This parameter's SYNTAX allows t… |
SNMPv2-TCRowPointerr/w Textual Convention: SNMPv2-TCRowPointer ObjectIdentifier |
.1.3.6.1.4.1.164.6.2.35.1.1.9 |
ifPerfTable
table.1.3.6.1.4.1.164.6.2.35.2.1
·
1 row entry
·
4 columns
Interface Performance Table. The propose of this table is to support statistics counters having 64 bit by using 2 parameters with syntax= Integer32. This is because SNMPv1 does not support Counter64 properly. For SNMPv3, ifPerfHCCounter (Counter64) may be supported.
An entry in the Interface Performance Table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
ifPerfCounterType
2nd index of the ifPerfTable.
This parameter represents the Counter Type. Each application can have a different association between this object's value and counter type - see relevant application spec. For VPLS-MTU appl… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.35.2.1.1.1 |
|
ifPerfLowCounterPart
In order to support Counters having 64 bit length,
the performance counter is divided into two 32 bit parameters as follows: [ 64 bit parameter ] = [ High 32 bit parameter ][ Low 32 bit parameter ]. This parameter h… |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.35.2.1.1.2 |
|
ifPerfHighCounterPart
This parameter holds the High 32 bits of the counter
(see description in the above parameter). |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.35.2.1.1.3 |
|
ifPerfHCCounter
This High Capacity counter holds whole 64 bits of the counter
indicated by ifPerfCounterType (concatenates both counter parts ifPerfHighCounterPart&ifPerfLowCounterPart) This object can be supported only by agents usi… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.164.6.2.35.2.1.1.4 |
systemOamTable
table.1.3.6.1.4.1.164.6.2.36.1
·
1 row entry
·
4 columns
The OAM Configuration Table.
An entry in the OAM table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
systemOamCnfgIdx
This attribute indicates the Idx of the Cnfg(1..255) being
accessed ; Idx of 255 relates to the TmpCnfg. |
Integer32 | .1.3.6.1.4.1.164.6.2.36.1.1.1 |
|
systemOamFrequency
Time in sec. between 2 OAM packets.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.36.1.1.2 |
|
systemOamTimeoutCycles
No. of cycles the agent will send OAM packets without receiving a response
from the remote device before declaring that the connection to the remote side is down - Time Out. |
SNMPv2-SMIInteger32r/w Constraints: range: 0-2147483647Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.36.1.1.3 |
|
systemOamLinkCheck
This MIB object determines whether continuous connectivity Link checks will be
performed by the device for uplinks. For Vmux-2100: enable (3) value can be set upon device installation. In this case, TDM L… |
Enumerationr/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.164.6.2.36.1.1.4 |
systemOamDescrTable
table.1.3.6.1.4.1.164.6.2.36.2
·
1 row entry
·
7 columns
The OAM Descriptors Configuration Table.
An entry in the OAM table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
systemOamDescrIdx
The OAM Descriptor Index.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.36.2.1.1 |
||||||||||||||||||||||||
|
systemOamDescrRowStatus
Enables the user to create/delete entries in this table.
|
SNMPv2-TCRowStatusr/w Enumerated Values:
Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.6.2.36.2.1.2 |
||||||||||||||||||||||||
|
systemOamDescrMode
The OAM Mode of the Descriptor.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.6.2.36.2.1.3 |
||||||||||||||||||||||||
|
systemOamDescrCCDirection
OAM Continuity Check function mode.
both(2) - Agent sends OAM CC cells and checks received OAM CC cells. none(3) - Agent does not send and does not check received OAM CC cells. source(4)- Agent sends OAM CC cells. sink… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.6.2.36.2.1.4 |
||||||||||||||||||||||||
|
systemOamDescrLoopbackOperation
The OAM Loopback function mode.
off(2) - Stop sending loopback OAM cells. on(3) - Start loopback OAM cells. |
Enumerationr/w | .1.3.6.1.4.1.164.6.2.36.2.1.5 |
||||||||||||||||||||||||
|
systemOamDescrLoopbackDestAddr
Loopback Destination Address.
|
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.6.2.36.2.1.6 |
||||||||||||||||||||||||
|
systemOamDescrXcCounter
The number of connections that use this OAM Descriptor.
|
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.36.2.1.7 |
bitMappingTable
table.1.3.6.1.4.1.164.6.2.38
·
1 row entry
·
2 columns
This table maps bits of an octet string to an interface. For ACE-2002 this table is used to map bits of VLAN port lists to LAN VCC's. This table is the opposite view of the xcTable for xcBitMapping. It is used to ease the bit translation for the NMS.
Each entry in the table describes a correlation of a bit location to
an interface.
For ACE-2002 - Upon creation of a new LAN VCC the agent will add an
entry to this table that will define the bit location for that VCC.
an interface.
For ACE-2002 - Upon creation of a new LAN VCC the agent will add an
entry to this table that will define the bit location for that VCC.
Indexes
agnClkSrcPortCnfgIdx agnClkSrcPortSrcIdx agnClkSrcPortIdx
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
bitMappingLocation
The bit location in an octet string.
|
SNMPv2-SMIInteger32 Constraints: range: 1-2147483647Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.38.1.1 |
||||||
|
bitMappingIndex
The interface index or any other index that should be mapped.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.38.1.2 |
hostTable
table.1.3.6.1.4.1.164.6.2.40
·
1 row entry
·
12 columns
Host interface table.
An entry in the Host Table.
The hostParam1, hostParam2, and hostParam3 entries may
have different use in different applications.
The hostParam1, hostParam2, and hostParam3 entries may
have different use in different applications.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hostIndex
The Host Table Index. This index can have the same value as Host No.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.40.1.1 |
||||||||||||||||||||||||||
|
hostIP
The host interface IP address.
|
RFC1155-SMIIpAddressr/w Enumerated Values:
Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.6.2.40.1.2 |
||||||||||||||||||||||||||
|
hostIPMask
The host interface subnet mask.
|
RFC1155-SMIIpAddressr/w Enumerated Values:
Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.6.2.40.1.3 |
||||||||||||||||||||||||||
|
hostDefaultNextHop
The host interface Default Next Hop address.
|
RFC1155-SMIIpAddressr/w Enumerated Values:
Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.6.2.40.1.4 |
||||||||||||||||||||||||||
|
hostMode
This parameter represents the Host mode of operation.
There can be different values for each application. For example: Not Applicable = 1. |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.40.1.5 |
||||||||||||||||||||||||||
|
hostParam1
This parameter represents the first Host parameter.
There can be different values for each application. For example: Not Applicable = 1. |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.40.1.6 |
||||||||||||||||||||||||||
|
hostParam2
This parameter represents the 2nd Host parameter.
There can be different values for each application. |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.40.1.7 |
||||||||||||||||||||||||||
|
hostParam3
This parameter represents the 3nd Host parameter.
There can be different values for each application. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.40.1.8 |
||||||||||||||||||||||||||
|
hostRowStatus
Creation/Deletion of rows in the table.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.6.2.40.1.9 |
||||||||||||||||||||||||||
|
hostVlanTagging
Host VLAN support (Tagging).
untag - No support of VLAN Tagging. tag - 4 VLAN bytes will be added to the frame. |
Enumerationr/w Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.164.6.2.40.1.10 |
||||||||||||||||||||||||||
|
hostVlanId
Host VLAN ID.
|
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.40.1.11 |
||||||||||||||||||||||||||
|
hostVlanPriority
Host VLAN Frame priority.
|
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.40.1.12 |
invNameXCTable
table.1.3.6.1.4.1.164.6.2.41
·
1 row entry
·
3 columns
Inverse Name XC Table. This table can be used to ease the search for a connection first index by the connection name.
An entry in the table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
invNameXC
The unique Connection name,
associated to a Cross-Connection. |
OctetString Enumerated Values:
|
.1.3.6.1.4.1.164.6.2.41.1.1 |
||||||||||
|
invNameXCType
The OBJECT IDENTIFIER of the respective XC Table.
Examples: XC Table invNameXCType --------------------------------------------------- atmVpCrossConnectTable 1.3.6.1.2.1.37.1.9 atmVcCrossConnectTable… |
ObjectIdentifier Enumerated Values:
|
.1.3.6.1.4.1.164.6.2.41.1.2 |
||||||||||
|
invNameXCIndex
The XC Table (invNameXCType) may include more than one index.
This object represents the value of the first XC Index. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.41.1.3 |
rowInfoTable
table.1.3.6.1.4.1.164.6.2.43
·
1 row entry
·
4 columns
This table holds information of other tables.
An entry in the table.
Indexes
agnClkCurrentIndex
| Column | Syntax | OID |
|---|---|---|
|
rowInfoTableId
The OBJECT IDENTIFIER of the Table,
which its information is held by this table (rowInfoTable). Examples: Table Name rowInfoTableId --------------------------------------------------- atmTrafficDescr… |
ObjectIdentifier | .1.3.6.1.4.1.164.6.2.43.1.1 |
|
rowInfoCounter
The Number of rows in the table, indicated by rowInfoTableId.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.43.1.2 |
|
rowInfoIndexNext
The First Free Index of the table, indicated by rowInfoTableId.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.43.1.3 |
|
rowInfoMaxNoOfRows
The maximum possible number of rows in the table, indicated by rowInfoTableId.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.43.1.4 |
agnFunctionTable
table.1.3.6.1.4.1.164.6.2.45
·
1 row entry
·
2 columns
This table is used in order to activate/deactivate device functions. The index indicates the function. Each function can be Enabled or Disabled.
An entry in the table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
agnFunction
This MIB object indicates the function that will be enabled or disabled
in the device. alarmForwarding= Fault Propagation (usually towards user port). For Vmux: routing (2) - enable/disable Router backup (3) - enable… |
Enumeration | .1.3.6.1.4.1.164.6.2.45.1.1 |
|
agnFunctionActivation
This MIB object indicates the activation of the current function.
|
Enumerationr/w | .1.3.6.1.4.1.164.6.2.45.1.2 |
alarmForwardingTable
table.1.3.6.1.4.1.164.6.2.50
·
1 row entry
·
11 columns
The Alarm Forwarding Mechanism will be operated for this table entries.
Each entry in this table is a pair of ports that
the Alarm Forwarding Mechanism is determined for.
the Alarm Forwarding Mechanism is determined for.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
alarmForwardingFailPort
An Index of the port on which a fail occurs.
|
Integer32 | .1.3.6.1.4.1.164.6.2.50.1.1 |
||||||||||||||||||||
|
alarmForwardingToPort
An Index of the port that will be affected
upon the failure of the alarmForwardingFailPort. |
Integer32 | .1.3.6.1.4.1.164.6.2.50.1.2 |
||||||||||||||||||||
|
alarmForwardingRowStatus
Creation/ Deletion of rows in the table.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.6.2.50.1.3 |
||||||||||||||||||||
|
alarmForwardingRecoveryTime
This parameter defines the maximum time (sec)
the affected port will hold the down state. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.50.1.4 |
||||||||||||||||||||
|
alarmForwardingGroupConditions
This parameter is applicable when there is a group of interfaces
in which a fault may occur, and one interface to which alarm is propagated (forwarded). 0 = All - Forwarding will take place only when all interfaces of … |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.2.50.1.5 |
||||||||||||||||||||
|
alarmForwardingCause
Bit map representing the cause upon which alarm forwarding will take place.
bit 0 - LOSS (LINE DOWN) bit 1 - AIS bit 2 - RDI bit 3 - PROTOCOL DOWN. bit 4 - OAM Signaling - EFM bit 5 - OAM Signaling - CFM. |
Bitsr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.6.2.50.1.6 |
||||||||||||||||||||
|
alarmForwardingRecoveryMode
This parameter determines the Recovery Mode.
manual - The user should stop the alarm forwarding by using the alarmForwardingRecoveryCommand. automatic - Alarm forwarding will be automatically stopped upon alarmForwar… |
Enumerationr/w | .1.3.6.1.4.1.164.6.2.50.1.7 |
||||||||||||||||||||
|
alarmForwardingRecoveryCommand
This parameter is a command. It is applicable when
alarmForwardingRecoveryMode = manual. on - Will stop alarm forwarding. After setting to 'On', the agent will set this parameter back to 'Off'. |
Enumerationr/w | .1.3.6.1.4.1.164.6.2.50.1.8 |
||||||||||||||||||||
|
alarmForwardingDelay
This parameter determines the period of time (in seconds) the
alarm of the alarmForwardingFailPort should exist before starting alarm forwarding. |
SNMPv2-SMIUnsigned32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.50.1.9 |
||||||||||||||||||||
|
alarmForwardingDirection
This parameter determines the Direction of the Alarm Forwarding.
unidirectional - alarmForwardingFailPort affects the alarmForwardingToPort. bidirectional - alarmForwardingFailPort affects the … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.6.2.50.1.10 |
||||||||||||||||||||
|
alarmForwardingAction
Bit map representing the action to be performed when alarm forwarding will take place.
bit 0 - No Action. '1' value - device should NOT perform any action, though other bits indicate the ac… |
Bitsr/w Constraints: range: 0-720 |
.1.3.6.1.4.1.164.6.2.50.1.11 |
agnClkSrcPortTable
table.1.3.6.1.4.1.164.6.2.52.1
·
1 row entry
·
11 columns
Pool of Ports for the Master/Fallback Clock Source and of Recovered IDs. For devices with more than one configuration: Set operation is valid only to the TmpCnfg entry.
An entry in the table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
agnClkSrcPortCnfgIdx
This object indicates the Idx of the Cnfg being
accessed ; Idx of 255 relates to the TmpCnfg. For product supporting a single configuration, the value will be 1. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.6.2.52.1.1.1 |
||||||||||||
|
agnClkSrcPortSrcIdx
Clock Source Index.
master - refers to Master clock fallback - refers to Fallback clock recovered - refers to Recovered clock. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.6.2.52.1.1.2 |
||||||||||||
|
agnClkSrcPortIdx
This object indicates the running Idx of the Port/Recovered ID that is
to be used as Clock Source, for each agnClkSrcPortSrcIdx instance. |
Integer32 | .1.3.6.1.4.1.164.6.2.52.1.1.3 |
||||||||||||
|
agnClkSrcPort
This object indicates the Port/Interface/Recovered ID # that is
to be used as Clock Source. In case of agnClkSrcPortSrcIdx=recovered (3) - it indicates the PW number. When agnClkSrcPortSrcIdx=master(1) or fallback(2), … |
Integer32r/w | .1.3.6.1.4.1.164.6.2.52.1.1.4 |
||||||||||||
|
agnClkSrcPortRowStatus
This object enables Creation/ Deletion of rows in the table.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.6.2.52.1.1.5 |
||||||||||||
|
agnClkSrcPortAdminStatus
This object indicates the Recovered Clock Administrative Status.
|
Enumerationr/w | .1.3.6.1.4.1.164.6.2.52.1.1.6 |
||||||||||||
|
agnClkSrcPortType
This object is relevant only in case of Recovery Clock.
It indicates the Clock Type. |
Enumerationr/w | .1.3.6.1.4.1.164.6.2.52.1.1.7 |
||||||||||||
|
agnClkSrcPortQuality
This object indicates the Clock Source Quality.
|
Enumerationr/w | .1.3.6.1.4.1.164.6.2.52.1.1.8 |
||||||||||||
|
agnClkSrcPortNetType
This object is relevant only in case of Recovery Clock.
It indicates the Clock Network Type, i.e. the PSN network characteristics and behavior. |
Enumerationr/w | .1.3.6.1.4.1.164.6.2.52.1.1.9 |
||||||||||||
|
agnClkSrcPortState
This object indicates the Clock State.
freeRun(1) - Clock recovery is not locked to any clock. frequencyAcquisition(2) - Adaptive clock recovery is learning the frequency. ra… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.6.2.52.1.1.10 |
||||||||||||
|
agnClkSrcPortSrcType
This object indicates the Src Type of each entry in the list of source
instances, when agnClkSrcPortSrcIdx=master(1)or fallback(2). According to this type, agnClkSrcPort gets the relevant meaning (Port index or Recover… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.6.2.52.1.1.11 |
agnCurrClkTable
table.1.3.6.1.4.1.164.6.2.52.2
·
1 row entry
·
8 columns
Current Clock Source.
An entry in the table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
agnCurrClkObjIdx
This MIB object identifies the object for which the Clock Source
is used (System, Other System, Card). |
Integer32 | .1.3.6.1.4.1.164.6.2.52.2.1.1 |
|
agnCurrClkMode
Current Clock Source Mode.
master - refers Master clock fallback - refers Fallback clock internal - only when both Master and Fallback Sources failed |
Enumeration Constraints: range: 1-255 |
.1.3.6.1.4.1.164.6.2.52.2.1.2 |
|
agnCurrClkSrc
This object indicates the Current Clock Source.
|
Enumeration | .1.3.6.1.4.1.164.6.2.52.2.1.3 |
|
agnCurrClkPort
This object indicates the Port/Interface/Recovered ID that is
Currently used as Clock Source. - When agnCurrClkSrc=rxClock(3), this object indicates a Port index. - When agnCurrClkSrc=recovered(12), this object indicat… |
Integer32 | .1.3.6.1.4.1.164.6.2.52.2.1.4 |
|
agnCurrClkHoldover
Current Clock Holdover State.
As a last resort, in the absence of higher quality timing: - a SONET/SDH object can enter 'holdover' state, until higher quality external timing becomes available again. In this state … |
Enumeration | .1.3.6.1.4.1.164.6.2.52.2.1.5 |
|
agnCurrClkSsmBased
This parameter indicates whether clock source
is selected based on receive clock quality. Clock quality is indicated in S1 byte inside SONET/SDH overhead, (encoded as SSM - Synchronization Status Messaging). |
Enumeration | .1.3.6.1.4.1.164.6.2.52.2.1.6 |
|
agnCurrClkState
This object indicates the Current Clock State.
freeRun(1) - Current clock state machine is not locked and run from the internal oscillator. rapidPhaseLock(2) - Current clock state machine i… |
Enumeration | .1.3.6.1.4.1.164.6.2.52.2.1.7 |
|
agnCurrClkQualification
This object indicates the Current Clock Qualification
and defines whether the PLL can locked according to the stratum definitions. |
Enumeration | .1.3.6.1.4.1.164.6.2.52.2.1.8 |
agnClkCurrentTable
table.1.3.6.1.4.1.164.6.2.52.3.1
·
1 row entry
·
5 columns
The Clock Current table.
An entry in the Clock Current table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
agnClkCurrentIndex
An Index that is uniquely represents the Clock.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.52.3.1.1.1 |
|
agnClkCurrentRxPackets
The counter associated with the number of Received Packets,
encountered by a Bridge Port in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.52.3.1.1.2 |
|
agnClkCurrentLostPackets
The counter associated with the number of Lost Packets,
encountered by a Bridge Port in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.52.3.1.1.3 |
|
agnClkCurrentOutOfOrderPackets
The counter associated with the number of times Out-of-Order Packets
encountered by a Bridge Port in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.52.3.1.1.4 |
|
agnClkCurrentBufferUnderflow
The counter associated with the number of times Underflow event
encountered by a Bridge Port in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.52.3.1.1.5 |
agnClkIntervalTable
table.1.3.6.1.4.1.164.6.2.52.3.2
·
1 row entry
·
6 columns
The Clock Interval table.
An entry in the Clock Interval table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
agnClkIntervalIndex
An Index that is uniquely represents the Clock.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.52.3.2.1.1 |
|
agnClkIntervalNumber
A number between 1 and 96,
where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals exist). |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.52.3.2.1.2 |
|
agnClkIntervalRxPackets
The counter associated with the number of Received Packets,
encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.52.3.2.1.3 |
|
agnClkIntervalLostPackets
The counter associated with the number of Lost Packets,
encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.52.3.2.1.4 |
|
agnClkIntervalOutOfOrderPackets
The counter associated with the number of times Out-of-Order Packets
are detected, encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.52.3.2.1.5 |
|
agnClkIntervalBufferUnderflow
The counter associated with the number of times Underflow event
is detected, encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.52.3.2.1.6 |
lagTable
table.1.3.6.1.4.1.164.6.2.54.1
·
1 row entry
·
10 columns
A table defining Link Aggregation Groups port association, and other parameters.
An entry in the LAG table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
lagCnfgIdx
This object indicates the Idx of the Cnfg(1..255) being
accessed ; Idx of 255 relates to the TmpCnfg. |
Unsigned32 | .1.3.6.1.4.1.164.6.2.54.1.1.1 |
||||||||||||
|
lagIdx
This object indicates LAG unique index.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.54.1.1.2 |
||||||||||||
|
lagPortMembers
The set of ports which are permanently assigned to the
Link Aggregation Group. The default value of this object is a string of zeros. |
Q-BRIDGE-MIBPortListr/w Textual Convention: Q-BRIDGE-MIBPortList OctetString |
.1.3.6.1.4.1.164.6.2.54.1.1.3 |
||||||||||||
|
lagDistributionMethod
This object defines the criteria for the 802.3ad (LAG)
to split the traffic between ports |
Enumerationr/w Constraints: range: 0-100 |
.1.3.6.1.4.1.164.6.2.54.1.1.4 |
||||||||||||
|
lagRecoveryMode
This object defines whether traffic will be returned to
a port after its recovery. This object is applicable only when lagDistributionMethod= oneToOne (3). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.6.2.54.1.1.5 |
||||||||||||
|
lagWaitToRestore
This object defines traffic recovery time (in seconds)
to the port after its recovery. This object is applicable only when lagRecoveryMode= revertive (3). |
Unsigned32r/w | .1.3.6.1.4.1.164.6.2.54.1.1.6 |
||||||||||||
|
lagRowStatus
This object enables user to create/delete
entries of this table. Note: When using LAG standard package, this table is static, hence, only the values active(1), notInService(2) are used. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.6.2.54.1.1.7 |
||||||||||||
|
lagShutDownDurationUponFlip
This object defines the duration (in seconds) the active
port transmission is shut down after LAG Flip occurs. The transmission is shut down and then opened again (after the duration defined by this object), in ord… |
Unsigned32r/w | .1.3.6.1.4.1.164.6.2.54.1.1.8 |
||||||||||||
|
lagRdnMethod
This object defines the redundancy method.
|
Enumerationr/w | .1.3.6.1.4.1.164.6.2.54.1.1.9 |
||||||||||||
|
lagLacpEnable
Enabling/Disabling the LACP for a LAG.
The LACP will be enabled for all ports belonging to this LAG. |
Enumerationr/w Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.164.6.2.54.1.1.10 |
lagStatTable
table.1.3.6.1.4.1.164.6.2.54.2
·
1 row entry
·
2 columns
A table defining Link Aggregation Groups Redundancy. This table is applicable only when lagDistributionMethod = oneToOne.
An entry in the LAG Status table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
lagStatForcePort
This object enables user to enforce the active port.
0 = No Enforcement; Otherwise the ifIndex of the port. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.54.2.1.1 |
|
lagStatActivePort
This object indicates the current active port. It is applicable only
when lagDistributionMethod = oneToOne. The value is the ifIndex of the port. 0 = none of the ports is active. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.54.2.1.2 |
gfpCnfgTable
table.1.3.6.1.4.1.164.6.2.55.1
·
1 row entry
·
4 columns
Configuration table for GFP (General Framing Protocol).
An entry in the GFP configuration table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
gfpCnfgIdx
Index to GFP configuration table.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.55.1.1.1 |
||||||
|
gfpPayloadFcs
This object defines whether protocol header will
include FCS. |
Enumerationr/w | .1.3.6.1.4.1.164.6.2.55.1.1.2 |
||||||
|
gfpRxTxScramble
This object defines whether transmission will be scrambled.
|
Enumerationr/w | .1.3.6.1.4.1.164.6.2.55.1.1.3 |
||||||
|
gfpVcatHeader
VCAT header is LCAS CONTROL packet as described in the G-7043.
one control packet is transmitted in a period of 16 Multi frame |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.6.2.55.1.1.4 |
agnGroupTable
table.1.3.6.1.4.1.164.6.2.56
·
1 row entry
·
4 columns
A table that enables associating components to Group/s (or removing components of a group). The Group Idx can then be used in other tables (e.g alarmForwardingTable).
An entry in the agnGroupTable.
Indexes
prtPriorityIdx1 prtPriorityPrtIdx prtPriorityIdx
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
agnGroupCnfgIdx
This object indicates the Idx of the Cnfg(1..255) being
accessed ; Idx of 255 relates to the TmpCnfg. |
Unsigned32 Constraints: range: 1-255 |
.1.3.6.1.4.1.164.6.2.56.1.1 |
||||||||||||
|
agnGroupIdx
This object indicates a unique Group Index.
|
SNMPv2-SMIUnsigned32 Constraints: range: 0-2147483647Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.56.1.2 |
||||||||||||
|
agnGroupComponentIdx
This object indicates a unique Component Index that belongs to the
Group defined by agnGroupIdx. |
SNMPv2-SMIUnsigned32 Constraints: range: 0-7Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.56.1.3 |
||||||||||||
|
agnGroupRowStatus
This object enables user to create/delete entries of this table.
destroy - If a Group is used in another table, Agent may not allow destroying the entry/ies that belong to this Group Index. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.6.2.56.1.4 |
alarmSyncTable
table.1.3.6.1.4.1.164.6.2.61.2.1
·
1 row entry
·
5 columns
This table includes Alarm Synchronization information for each Logical Group of managers.
An entry in the table.
Indexes
prtQosIdx prtQosPrtIdx prtQosDirection
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
alarmSyncGroupId
A unique Logical Group ID,
which represents a group of managers. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.61.2.1.1.1 |
||||||||
|
alarmSyncLastSentSeqId
Last Sequence ID of trap that is sent
to this Logical Group of managers. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.61.2.1.1.2 |
||||||||
|
alarmSyncCmd
Initates an Alarm Synchronization request
for this Logical Group of managers. softSync(2) - sends Soft Synchronization request, in order to synchronize missing traps from Agent. hardSync(3) - sends … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.6.2.61.2.1.1.3 |
||||||||
|
alarmSyncStartSeqId
First Sequence ID of Soft Synchronization request
for this Logical Group of managers. Soft Synchronization request is sent for a range of Sequence IDs. This object represents the first Sequence ID of this… |
SNMPv2-SMIUnsigned32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.61.2.1.1.4 |
||||||||
|
alarmSyncEndSeqId
Last Sequence ID of Soft Synchronization request
for this Logical Group of managers. Soft Synchronization request is sent for a range of Sequence IDs. This object represents the last Sequence ID of this r… |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.61.2.1.1.5 |
agnStringToIndexTable
table.1.3.6.1.4.1.164.6.2.62
·
1 row entry
·
3 columns
This table holds the conversions of tables from unique String to numeric index.
An entry in the table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
agnStringToIndexTableId
The OBJECT IDENTIFIER of the Table, having as index numeric values.
In this table, the value of agnStringToIndexUserName is an attribute. |
ObjectIdentifier | .1.3.6.1.4.1.164.6.2.62.1.1 |
|
agnStringToIndexUserName
This object indicates a unique name used by agnStringToIndexTableId,
although it is not it's index. |
OctetString | .1.3.6.1.4.1.164.6.2.62.1.2 |
|
agnStringToIndexTableIndex
The numeric Index of agnStringToIndexTableId.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.62.1.3 |
agnRowPointerTable
table.1.3.6.1.4.1.164.6.2.63
·
1 row entry
·
2 columns
This table holds information about a specific entry in a table. For example, number of usages of this row.
An entry in the table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
agnRowPointerIndex
The OBJECT IDENTIFIER of an entry in a table.
|
ObjectIdentifier Constraints: range: 0-7 |
.1.3.6.1.4.1.164.6.2.63.1.1 |
|
agnRowPointerNoOfUsages
The number of usages of specific entry in a table, which is
pointed by agnRowPointerIndex.Usually, when the value of this counter is greater than 0,the entry cannot be removed. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.2.63.1.2 |
wfqTable
table.1.3.6.1.4.1.164.6.3.1.1
·
1 row entry
·
9 columns
This table allows user to define several
WFQ tables per output port.
WFQ supports flows with different bandwidth requirements
by giving each queue a weight that assigns it
a different percentage of output port bandwidth.
When Weighted Fair Queuing is used,
it is possible to precisely attribute bandwidth
partitioning among the queues.
When there is congestion, each class (queue)
is not allowed to use more bandwidth than the amount
allocated to it.
An entry in the Weighted Fair Queueing table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
wfqCnfgIdx
This object indicates the Idx of the Agent Cnfg the following
objects refer. 255=Temporary Cnfg (when relevant, Set is done only to this configuration). For Agents that support only one configuration, this object wil… |
Integer32 Constraints: range: 0-7 |
.1.3.6.1.4.1.164.6.3.1.1.1.1 |
||||||||||||
|
wfqPrtIdx
This object indicates a unique port or interface number,
for which Weighted Fair Queueing table is applicable . For numbering, see product's spec. For some products, the numbering can equal ifIndex. Value of 255 (not … |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.3.1.1.1.2 |
||||||||||||
|
wfqTblIdx
This object indicates which Weighted Fair Queueing (WFQ)
Table is being used. There can be several tables. For FCD-155 User will select which one will be used for a virtual concatenation group.Valid values are 1,2 |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.3.1.1.1.3 |
||||||||||||
|
wfqQueueIdx
This object indicates a queue index.
For FCD-155, valid queues are 1..3. The 4th queue is not in MIB. Its weight will be RO, Calculated according to the sum of the 3 first queues. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.3.1.1.1.4 |
||||||||||||
|
wfqRowStatus
This object enables Creation/Deletion of
rows in the WFQ table. For FCD-155, rows are not created nor destroyed by user. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.6.3.1.1.1.5 |
||||||||||||
|
wfqWeightValue
This object indicates a relative weight value.
User should make sure that the sum of values for all queues will not exceed 100% (sum should be BELOW 100% in order to leave some BW percentage for last queue) Note th… |
%Integer32r/w | .1.3.6.1.4.1.164.6.3.1.1.1.6 |
||||||||||||
|
wfqSchedulingMode
This object controls which scheduling mode is used:
Weighted Fair Queuing (WFQ) scheme or priority Queue (Strict Priority). |
Enumerationr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.6.3.1.1.1.7 |
||||||||||||
|
wfqMinRateAbsolute
The minimum absolute rate, in kbps,
that should be allocated to this queue. If the value is zero, then there is effectively no minimum rate guarantee. If the value is non-zero, then the servicing of this queue in at… |
KbpsSNMPv2-SMIUnsigned32r/w Constraints: range: 1-4095Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.1.1.1.8 |
||||||||||||
|
wfqMaxPacketSize
The size of the largest packet which can be received
on this queue, specified in octets. Packets larger than this size will be discarded. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.1.1.1.9 |
dscpMappingTable
table.1.3.6.1.4.1.164.6.3.2.1
·
1 row entry
·
3 columns
Mapping of DSCP value to a regenerated priority level.
An entry in dscpMappingTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
dscpMappingCnfgIdx
This object indicates the Idx of the Agent Cnfg the following
objects refer to. 255=Temporary Cnfg (when relevant, Set is done only to this configuration). For Agents that support only one configuration, this object … |
Integer32 | .1.3.6.1.4.1.164.6.3.2.1.1.1 |
||||
|
dscpMappingDscpIdx
DSCP value of the incoming IP packet
|
Dscp Textual Convention: BDCOM-QOS-PIB-MIBDscp Integer32Type Constraints: range: 0..63 |
.1.3.6.1.4.1.164.6.3.2.1.1.2 |
||||
|
dscpMappingRegenPriority
The Regenerated Priority level the
incoming DSCP value is mapped to. For FCD-155, valid values are 0,1,2,3 |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.3.2.1.1.3 |
ifTeQosTable
table.1.3.6.1.4.1.164.6.3.3.1
·
1 row entry
·
6 columns
The TE QOS Interface Table.
An entry in the TE QOS Interface table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
ifTeQosIdx1
This object indicates the 1st Index of the table.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.3.3.1.1.1 |
|
ifTeQosIdx2
This object indicates the 2nd Index of the table.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.3.3.1.1.2 |
|
ifTeQosIdx3
This object indicates the 3rd Index of the table.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.3.3.1.1.3 |
|
ifTeQosParam
This object is used for QOS attributes
of the entry's entities. |
OctetStringr/w | .1.3.6.1.4.1.164.6.3.3.1.1.4 |
|
ifTeQosParam2
This object is used for 2nd group QOS attributes
of the entry's entities. |
OctetStringr/w | .1.3.6.1.4.1.164.6.3.3.1.1.5 |
|
ifTeQosStatus
This object is used to create, activate and
destroy entries of this table. |
Enumerationr/w | .1.3.6.1.4.1.164.6.3.3.1.1.6 |
prtPriorityTable
table.1.3.6.1.4.1.164.6.3.4.1
·
1 row entry
·
4 columns
A table - Parameters per port per Priority .
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
prtPriorityIdx1
This attribute indicates the Idx of the Cnfg(1..255) being
accessed ; Idx of 255 relates to the TmpCnfg. or any other Index. |
Integer32 | .1.3.6.1.4.1.164.6.3.4.1.1.1 |
|
prtPriorityPrtIdx
This object indicates a unique Port Index.
Refer to device specification for port Index. |
Integer32 | .1.3.6.1.4.1.164.6.3.4.1.1.2 |
|
prtPriorityIdx
This object indicates the Traffic Priority Index.
|
Integer32 | .1.3.6.1.4.1.164.6.3.4.1.1.3 |
|
prtPriorityIngressRateLimit
The maximum rate permitted at Ingress of
this port with this Traffic Priority, in Kbps. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.3.4.1.1.4 |
prtQosTable
table.1.3.6.1.4.1.164.6.3.4.2
·
1 row entry
·
8 columns
Port QoS (Quality of Service) table.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
prtQosIdx
The first index of the table.
This attribute might indicate the Idx of the Cnfg (1..255) being accessed ; Idx of 255 relates to the TmpCnfg or any other Index. |
SNMPv2-SMIUnsigned32 Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.4.2.1.1 |
||||
|
prtQosPrtIdx
This object indicates a unique Port Index.
Refer to device specification for port Index. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.4.2.1.2 |
||||
|
prtQosDirection
This object indicates the port's QoS Direction.
|
Enumeration | .1.3.6.1.4.1.164.6.3.4.2.1.3 |
||||
|
prtQosRateLimitPacketType
This object indicates the Type of Packets on which Rate Limitation is applied.
|
Enumerationr/w | .1.3.6.1.4.1.164.6.3.4.2.1.4 |
||||
|
prtQosRateLimitCIR
This object indicates the port's CIR (Committed Information Rate) in Kbps.
Value=0 represents best effort. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.4.2.1.5 |
||||
|
prtQosRateLimitCBS
This object indicates the port's CBS (Committed Burst Size) in KB.
Value=0 represents best effort. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.4.2.1.6 |
||||
|
prtQosRateLimitEIR
This object indicates the port's EIR (Excess Information Rate) in Kbps.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.4.2.1.7 |
||||
|
prtQosRateLimitEBS
This object indicates the port's EBS (Excess Burst Size) in KB.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.4.2.1.8 |
portTrafficClassTable
table.1.3.6.1.4.1.164.6.3.5.1
·
1 row entry
·
3 columns
Mapping of port to Traffic Class level.
An entry in portTrafficClassTable.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
portTrafficClassIdx1
This attribute indicates the 1st index of the table.
This may be the Idx of the Cnfg(1..255) being accessed; Idx of 255 relates to the TmpCnfg, or any other Index. |
Integer32 | .1.3.6.1.4.1.164.6.3.5.1.1.1 |
|
portTrafficClassPortIdx
This object indicates a unique Port Index.
Refer to device specification for port Index. |
Integer32 | .1.3.6.1.4.1.164.6.3.5.1.1.2 |
|
portTrafficClass
This object indicates the Traffic Class level of this port.
|
Integer32r/w | .1.3.6.1.4.1.164.6.3.5.1.1.3 |
serviceTable
table.1.3.6.1.4.1.164.6.3.6
·
1 row entry
·
5 columns
Table of services.
An entry in the Service Table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
flowIndex
Defines the Flow ID the service is associated to.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.6.1.1 |
||||||||||||
|
serviceIndex
Defines the Service ID - according to the CoS.
|
Unsigned32 | .1.3.6.1.4.1.164.6.3.6.1.2 |
||||||||||||
|
serviceRowStatus
This attribute is used to create a new row or to delete an existing row
in the table. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.6.3.6.1.3 |
||||||||||||
|
serviceName
This attribute defines the service name.
|
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.6.3.6.1.4 |
||||||||||||
|
serviceBwProfileId
This variable holds the index of the Ingress BW profile assigned
to that service. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.6.1.5 |
evcCosTable
table.1.3.6.1.4.1.164.6.3.7
·
1 row entry
·
5 columns
This table defines mapping of Ethernet Virtual Connection (EVC) ID to Class of Service (CoS) ID
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
evcCosCnfgIdx
This attribute indicates the Idx of the Cnfg(1..255) being
accessed ; Idx of 255 relates to the TmpCnfg. |
Unsigned32 | .1.3.6.1.4.1.164.6.3.7.1.1 |
||||||||||||||||||||||||||||||||||||
|
evcCosEvcIdx
This attribute indicates EVC Id.
|
Unsigned32 Enumerated Values:
|
.1.3.6.1.4.1.164.6.3.7.1.2 |
||||||||||||||||||||||||||||||||||||
|
evcCosRowStatus
This attribute allows to create/delete a row in this table.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.6.3.7.1.3 |
||||||||||||||||||||||||||||||||||||
|
evcCosEvcName
A string that identifies the EVC. It should be unique
in the Maintenance Domain (i.e., in the managed network) Used as MEG ID field in OAM messages. |
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.6.3.7.1.5 |
||||||||||||||||||||||||||||||||||||
|
evcCosSpVlanId
This object indicates the SP (Service Provider) VLAN used when sending
an OAM message for the specified EVC. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.7.1.6 |
serviceStatTable
table.1.3.6.1.4.1.164.6.3.8
·
1 row entry
·
26 columns
Service statistics table.
An entry in the Service Statistics Table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
serviceStatDirection
The direction in wich the measurement is taken.
|
Enumeration | .1.3.6.1.4.1.164.6.3.8.1.1 |
|
srvForwardGreenPackets
This attribute displays the counted number of forwarded packets
that where marked Green. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.8.1.2 |
|
srvForwardGreenPacktesOverflow
This attribute displays the number of times that the
forwardGreenPackets counter has overflowed. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.8.1.3 |
|
srvForwardYellowPackets
This attribute displays the counted number of forwarded packets
that where marked Yellow. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.8.1.4 |
|
srvForwardYellowPacketsOverflow
This attribute displays the number of times that the
forwardYellowPackets counter has overflowed. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.8.1.5 |
|
srvDiscardGreenPacket
This attribute displays the counted number of discarded packets
that where marked Green. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.8.1.6 |
|
srvDiscardGreenPacketOverflow
This attribute displays the number of times that the
discardGreenPacket counter has overflowed. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.8.1.7 |
|
srvDiscardYellowRedPackets
This attribute displays the counted number of discarded packets
that where marked Yellow or Red. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.8.1.8 |
|
srvDiscardYellowRedPacketsOverflow
This attribute displays the number of times that the
discardYellowRedPackets counter has overflowed. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.8.1.9 |
|
srvForwardGreenBytes
This attribute displays the counted number of forwarded bytes
that where marked Green. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.8.1.10 |
|
srvForwardGreenBytesOverflow
This attribute displays the number of times that the
forwardGreenBytes counter has overflowed. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.8.1.11 |
|
srvForwardYellowBytes
This attribute displays the counted number of forwarded bytes
that where marked Yellow. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.8.1.12 |
|
srvForwardYellowBytesOverflow
This attribute displays the number of times that the
forwardYellowBytes counter has overflowed. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.8.1.13 |
|
srvDiscardGreenBytes
This attribute displays the counted number of discarded bytes
that where marked Green. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.8.1.14 |
|
srvDiscardGreenBytesOverflow
This attribute displays the number of times that the
discardGreenBytes counter has overflowed. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.8.1.15 |
|
srvDiscardYellowRedBytes
This attribute displays the counted number of discarded bytes
that where marked Yellow or Red. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.8.1.16 |
|
srvDiscardYellowRedBytesOverflow
This attribute displays the number of times that the
discardYellowRedBytes counter has overflowed. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.8.1.17 |
|
srvResetStatsCmd
Reset statistic counters of the service.
|
Enumerationr/w | .1.3.6.1.4.1.164.6.3.8.1.18 |
|
srvDiscardYellowPackets
This attribute displays the counted number of discarded packets
that where marked Yellow. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.8.1.19 |
|
srvDiscardYellowPacketsOverflow
This attribute displays the number of times that the
discardYellowPackets counter has overflowed. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.8.1.20 |
|
srvDiscardYellowBytes
This attribute displays the counted number of discarded bytes
that where marked Yellow. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.8.1.21 |
|
srvDiscardYellowBytesOverflow
This attribute displays the number of times that the
discardYellowBytes counter has overflowed. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.8.1.22 |
|
srvDiscardRedPackets
This attribute displays the counted number of discarded packets
that where marked Red. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.8.1.23 |
|
srvDiscardRedPacketsOverflow
This attribute displays the number of times that the
discardRedPackets counter has overflowed. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.8.1.24 |
|
srvDiscardRedBytes
This attribute displays the counted number of discarded bytes
that where marked Red. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.8.1.25 |
|
srvDiscardRedBytesOverflow
This attribute displays the number of times that the
discardRedBytes counter has overflowed. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.8.1.26 |
flowMappingProfileTable
table.1.3.6.1.4.1.164.6.3.9.1
·
1 row entry
·
6 columns
This table holds flow mapping profiles.
Each entry in this table describes one Flow mapping profile with
one of its Flow Mapping supported, according to the Priority order.
The information includes a reference to a Flow Mapping index.
one of its Flow Mapping supported, according to the Priority order.
The information includes a reference to a Flow Mapping index.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
flowMappingProfileIndex
A running index for the Flow Mapping Profile table.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.9.1.1.1 |
||||||||||||
|
flowMappingProfilePriority
The priority of the Mapping selected by flowMappingProfileMapIndex
within the Flow Mapping Profile. |
SNMPv2-SMIInteger32 Constraints: range: 0-63Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.6.3.9.1.1.2 |
||||||||||||
|
flowMappingProfileRowStatus
This attribute is used to create a new row or to delete an existing row
in the table. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.6.3.9.1.1.3 |
||||||||||||
|
flowMappingProfileNumOfMaps
This attribute determines the number of the mappings
associated to the Flow Mapping Profile. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.9.1.1.4 |
||||||||||||
|
flowMappingProfileMapIndex
This attribute holds a reference to the mapping index.
It specifies the mapping selected for the Mapping Profile for the selected Priority. When flowMappingProfileNumOfMaps=0, this attribute is not relevant. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.9.1.1.5 |
||||||||||||
|
flowMappingProfileName
This attribute defines the name assigned to flowMappingIndex profile.
|
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.6.3.9.1.1.6 |
qosFlowMappingTable
table.1.3.6.1.4.1.164.6.3.9.2
·
1 row entry
·
33 columns
A table of Flow Mapping.
Each entry in this table describes one Flow Mapping.
The information includes combination (AND function) of all the
classifications, as defined in the qosFlowMappingCriteria field.
Classifiers are: TOS, DSCP, VLAN ID, …
The information includes combination (AND function) of all the
classifications, as defined in the qosFlowMappingCriteria field.
Classifiers are: TOS, DSCP, VLAN ID, …
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
qosFlowMappingIdx1
- In case the table is accessed via flowMappingProfileTable
this is a running index for the QoS Flow Mapping table. - In case the table is not accessed via flowMappingProfileTable, this will be the ifIndex of the XNI … |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.9.2.1.1 |
||||||||||||
|
qosFlowMappingIdx2
An index for the QoS Flow Mapping table.
- In case the table is accessed via flowMappingProfileTable the index will be fixed = 1. - In case the table is not accessed via flowMappingProfileTable, this will be the index o… |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.9.2.1.2 |
||||||||||||
|
qosFlowMappingIdx3
An index for the QoS Flow Mapping table.
- In case the table is accessed via flowMappingProfileTable the index will be fixed = 1. - In case the table is not accessed via flowMappingProfileTable, this will be the Priorit… |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.9.2.1.3 |
||||||||||||
|
qosFlowMappingRowStatus
This attribute is used to create a new row or to delete an existing row
in the table. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.6.3.9.2.1.4 |
||||||||||||
|
qosFlowMappingCriteria
This attribute determines upon which criterion the flow
will be mapped. |
Bitsr/w | .1.3.6.1.4.1.164.6.3.9.2.1.5 |
||||||||||||
|
qosFlowMappingIeee802dot1p
This attribute determines which TOS values are applicable for that flow.
Each bit (0..7) represents a different 802.1 P-bit value. Setting '1' to the bit means that the corresponding 802.1 P-bit value is applicable. It… |
SNMPv2-SMIUnsigned32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.9.2.1.6 |
||||||||||||
|
qosFlowMappingTos
This attribute determines which TOS values are applicable for that flow.
Each bit (0..7) represents a different TOS value. Setting '1' to the bit means that the corresponding TOS value is applicable. It is relevant onl… |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.9.2.1.7 |
||||||||||||
|
qosFlowMappingFromDscp
This attribute determines the first DSCP value to compare with in a range.
It is relevant only in case the dscp bit (2) in qosFlowMappingCriteria equals 1. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.9.2.1.8 |
||||||||||||
|
qosFlowMappingToDscp
This attribute determines the first DSCP value to compare with in a range.
It is relevant only in case the dscp bit (2) in qosFlowMappingCriteria equals 1. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.9.2.1.9 |
||||||||||||
|
qosFlowMappingFromVlanId
This attribute determines the first VLAN ID value to compare with in a range.
It is relevant only in case the vlanId bit (3) in qosFlowMappingCriteria equals 1. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.9.2.1.10 |
||||||||||||
|
qosFlowMappingToVlanId
This attribute determines the last VLAN ID value to compare with in a range.
It is relevant only in case the vlanId bit (3) in qosFlowMappingCriteria equals 1. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.9.2.1.11 |
||||||||||||
|
qosFlowMappingFromSrcMacAddr
This attribute determines the first source MAC address to compare with in a range.
It is relevant only in case the macSrcAddr bit (4) in qosFlowMappingCriteria equals 1. |
MacAddressr/w Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.6.3.9.2.1.12 |
||||||||||||
|
qosFlowMappingToSrcMacAddr
This attribute determines the last source MAC address to compare with in a range.
It is relevant only in case the macSrcAddr bit (4) in qosFlowMappingCriteria equals 1. |
MacAddressr/w Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.6.3.9.2.1.13 |
||||||||||||
|
qosFlowMappingFromDestMacAddr
This attribute determines the first destination MAC address to compare with in a range.
It is relevant only in case the macDestAddr (5) bit in qosFlowMappingCriteria equals 1. |
MacAddressr/w Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.6.3.9.2.1.14 |
||||||||||||
|
qosFlowMappingToDestMacAddr
This attribute determines the last destination MAC address to compare with in a range.
It is relevant only in case the macDestAddr (5) bit in qosFlowMappingCriteria equals 1. |
MacAddressr/w Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.6.3.9.2.1.15 |
||||||||||||
|
qosFlowMappingFromSrcIpAddr
This attribute determines the first source IP address to compare with in a range.
It is relevant only in case the ipSrcAddr (6) bit in qosFlowMappingCriteria equals 1. |
RFC1155-SMIIpAddressr/w Constraints: range: 1-32Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.6.3.9.2.1.16 |
||||||||||||
|
qosFlowMappingToSrcIpAddr
This attribute determines the last source IP address to compare with in a range.
It is relevant only in case the ipSrcAddr (6) bit in qosFlowMappingCriteria equals 1. |
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.6.3.9.2.1.17 |
||||||||||||
|
qosFlowMappingFromDestIpAddr
This attribute determines the first destination IP address to compare with in a range.
It is relevant only in case the ipDestAddr (7) bit in qosFlowMappingCriteria equals 1. |
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.6.3.9.2.1.18 |
||||||||||||
|
qosFlowMappingToDestIpAddr
This attribute determines the last destination IP address to compare with in a range.
It is relevant only in case the ipDestAddr (7) bit in qosFlowMappingCriteria equals 1. |
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.6.3.9.2.1.19 |
||||||||||||
|
qosFlowMappingFromTcpSrcPort
This attribute determines the first TCP source port to compare with in a range.
It is relevant only in case the tcpSrcPort bit (8) in qosFlowMappingCriteria equals 1. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.9.2.1.20 |
||||||||||||
|
qosFlowMappingToTcpSrcPort
This attribute determines the last TCP source port to compare with in a range.
It is relevant only in case the tcpSrcPort bit (8) in qosFlowMappingCriteria equals 1. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.9.2.1.21 |
||||||||||||
|
qosFlowMappingFromTcpDestPort
This attribute determines the first TCP destination port to compare with in a range.
It is relevant only in case the tcpDestPort bit (9) in qosFlowMappingCriteria equals 1. |
SNMPv2-SMIUnsigned32r/w Constraints: range: 1-32Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.9.2.1.22 |
||||||||||||
|
qosFlowMappingToTcpDestPort
This attribute determines the last TCP destination port to compare with in a range.
It is relevant only in case the tcpDestPort bit (9) in qosFlowMappingCriteria equals 1. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.9.2.1.23 |
||||||||||||
|
qosFlowMappingFromUdpSrcPort
This attribute determines the first UDP source port to compare with in a range.
It is relevant only in case the udpSrcPort bit (10) in qosFlowMappingCriteria equals 1. |
SNMPv2-SMIUnsigned32r/w Constraints: range: 1-32Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.9.2.1.24 |
||||||||||||
|
qosFlowMappingToUdpSrcPort
This attribute determines the last UDP source port to compare with in a range.
It is relevant only in case the udpSrcPort bit (10) in qosFlowMappingCriteria equals 1. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.9.2.1.25 |
||||||||||||
|
qosFlowMappingFromUdpDestPort
This attribute determines the first UDP destination port to compare with in a range.
It is relevant only in case the udpDestPort bit (11) in qosFlowMappingCriteria equals 1. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.9.2.1.26 |
||||||||||||
|
qosFlowMappingToUdpDestPort
This attribute determines the last UDP destination port to compare with in a range.
It is relevant only in case the udpDestPort bit (11) in qosFlowMappingCriteria equals 1. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.9.2.1.27 |
||||||||||||
|
qosFlowMappingFromIpPrecedence
This attribute determines the first IpPrecedence value to compare with in a range.
It is relevant only in case the IpPrecedence bit (12) in qosFlowMappingCriteria equals 1. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.9.2.1.28 |
||||||||||||
|
qosFlowMappingToIpPrecedence
This attribute determines the last IpPrecedence value to compare with in a range.
It is relevant only in case the IpPrecedence bit (12) in qosFlowMappingCriteria equals 1. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.9.2.1.29 |
||||||||||||
|
qosFlowMappingInnerIeee802dot1p
This attribute determines which TOS values are applicable for that flow.
Each bit (0..7) represents a different inner 802.1 P-bit value. Setting '1' to the bit means that the corresponding inner 802.1 P-bit value is ap… |
SNMPv2-SMIUnsigned32r/w Constraints: range: 0-63Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.9.2.1.30 |
||||||||||||
|
qosFlowMappingFromInnerVlanId
This attribute determines the first inner VLAN ID value to compare with in a range.
It is relevant only in case the innerVlanId bit(14) in qosFlowMappingCriteria equals 1. |
SNMPv2-SMIUnsigned32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.9.2.1.31 |
||||||||||||
|
qosFlowMappingToInnerVlanId
This attribute determines the last inner VLAN ID value to compare with in a range.
It is relevant only in case the innerVlanId bit(14) in qosFlowMappingCriteria equals 1. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.9.2.1.32 |
||||||||||||
|
qosFlowMappingEtherType
Determines the Tag Protocol Identifier (in Hex).
For example: 0x8100 (C-TAG) 0x88A8 (S-TAG) It is relevant only in case the etherType bit (17) in qosFlowMappingCriteria equals 1. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.9.2.1.33 |
cosProfileTable
table.1.3.6.1.4.1.164.6.3.10
·
1 row entry
·
5 columns
Class of Service Profile table. Each profile holds a priority method, and a mappring function that maps the priority values (range according to the method) into CoS values.
A conceptual row where each row contains one CoS attributes.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
cosProfileIndex
Defines the CoS Profile ID.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.10.1.1 |
||||||||||||
|
cosProfileRowStatus
This attribute is used to create a new row or to delete an existing row
in the table. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.6.3.10.1.2 |
||||||||||||
|
cosProfileCosMethod
Defines the priority method upon CoS mapping is done.
|
Enumerationr/w | .1.3.6.1.4.1.164.6.3.10.1.3 |
||||||||||||
|
cosProfileName
This attribute defines the name assigned to CoS profile.
|
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.6.3.10.1.4 |
||||||||||||
|
cosProfileCosMapping
This attribute defines the value of the CoS that is assigned
for each priority. The number of the valid octets depends upon the priority method selected: Octet 0 corresponds to priority = 0 Octet 1 corresponds to pri… |
OctetStringr/w | .1.3.6.1.4.1.164.6.3.10.1.5 |
qProfileTable
table.1.3.6.1.4.1.164.6.3.11.1
·
1 row entry
·
5 columns
This table defines the profiles for a cluster of queues.
A conceptual row where each row contains one Queue Cluster attribute.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
qProfileIndex
Defines the Queue Cluster Profile ID.
|
SNMPv2-SMIUnsigned32 Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.11.1.1.1 |
||||||||||||
|
qProfileRowStatus
This attribute is used to create a new row or to delete an existing row
in the table. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.6.3.11.1.1.2 |
||||||||||||
|
qProfileName
This attribute holds the name of the Queue cluster profile.
|
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.6.3.11.1.1.3 |
||||||||||||
|
qProfileNumberOfInternalQ
This attribute holds the number of the internal queue profiles
that are pointed by qInternalQProfile. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.11.1.1.4 |
||||||||||||
|
qProfileInternalQProfile
This attribute holds the indexes to the queue profiles
in the qInternalProfileTable. Each couple of octets holds an index to the qInternalProfileTable. |
OctetStringr/w | .1.3.6.1.4.1.164.6.3.11.1.1.5 |
qInternalProfileTable
table.1.3.6.1.4.1.164.6.3.11.2
·
1 row entry
·
10 columns
This table holds queue profiles.
A conceptual row where each row contains one Queue attribute.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
qInternalProfileIndex
Defines the Queue Profile ID.
|
SNMPv2-SMIUnsigned32 Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.11.2.1.1 |
||||||||||||
|
qInternalProfileRowStatus
This attribute is used to create a new row or to delete an existing row
in the table. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.6.3.11.2.1.2 |
||||||||||||
|
qInternalProfileScheduling
This attribute determines the queue scheduling method.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.6.3.11.2.1.3 |
||||||||||||
|
qInternalProfileWFQWeight
This attribute determines the weight that each WFQ (Weighted Fair Queue)
participant gets. It is applicable only when scheduling is configured to WFQ. |
SNMPv2-SMIUnsigned32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.11.2.1.4 |
||||||||||||
|
qInternalProfileQueueLength
This attribute determines the length of the queue.
|
SNMPv2-SMIUnsigned32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.11.2.1.5 |
||||||||||||
|
qInternalProfileWredStartDropThresh
This attribute determines the length that the queue (Start Value)
must reach before the packets colored yellow will start being dropped by the WRED (Weighted Random Early Detection/Discard) mechanism. WRED is one the mo… |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.11.2.1.6 |
||||||||||||
|
qInternalProfileWredDropAllThresh
This attribute determines the length that the queue (Stop Value)
must reach before the WRED (Weighted Random Early Detection) shaper mechanism stops dropping randomly, and just drops all further packets marked as yello… |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.11.2.1.7 |
||||||||||||
|
qInternalProfileWredDropProbability
This attribute determines the percentage of packets that are being dropped
at the point when the length of the queue reaches the Stop value. So, effectively, this defines how quickly the rate of dropping packet must in… |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.11.2.1.8 |
||||||||||||
|
qInternalProfileRateLimit
This attribute determines the Rate Limit of the queue in Kbps.
Value=0 represents best effort. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.11.2.1.9 |
||||||||||||
|
qInternalProfileShaperProfile
This attribute defines the Shaper Profile (bwProfileIndex from bwProfileTable)
assigned to this qInternalProfile. Valid range of bwProfileIndex for Shaper Profiles is 0x8000001-0x8000041. If set to '0', no profile is a… |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.11.2.1.10 |
queueGroupTable
table.1.3.6.1.4.1.164.6.3.11.3
·
1 row entry
·
9 columns
This table defines the queue groups/blocks,their level and connections between them.
A conceptual row where each row contains one Queue group.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
queueGroupName
Defines the Queue Group unique name.
|
OctetString Enumerated Values:
|
.1.3.6.1.4.1.164.6.3.11.3.1.1 |
||||||||||||||||||||||||||||||||||
|
queueGroupQBlockLevel
This attribute holds the Level of the Queue Block .First level is 1.
NA=2^32-1. |
SNMPv2-SMIUnsigned32 Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.11.3.1.2 |
||||||||||||||||||||||||||||||||||
|
queueGroupQBlockIdx
This attribute holds the ID of the Queue Block.
NA=2^32-1. |
SNMPv2-SMIUnsigned32 Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.11.3.1.3 |
||||||||||||||||||||||||||||||||||
|
queueGroupRowStatus
This attribute is used to create a new row or to delete an existing row
in the table. |
SNMPv2-TCRowStatusr/w Enumerated Values:
Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.6.3.11.3.1.4 |
||||||||||||||||||||||||||||||||||
|
queueGroupQBlockProfile
This attribute defines the Queue profile assigned to this Queue Block.
This object points to qProfileIndex in qProfileTable. |
SNMPv2-SMIUnsigned32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.11.3.1.5 |
||||||||||||||||||||||||||||||||||
|
queueGroupQBlockShaperProfile
This attribute defines the Shaper profile assigned to this Queue Block.
|
SNMPv2-SMIUnsigned32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.11.3.1.6 |
||||||||||||||||||||||||||||||||||
|
queueGroupPointToQBlock
This attribute defines the Queue Block name of the next Queue Block level
that is pointed by this Queue Block. |
OctetStringr/w | .1.3.6.1.4.1.164.6.3.11.3.1.7 |
||||||||||||||||||||||||||||||||||
|
queueGroupPointToInternalQueue
This attribute defines the internal queue whithin queueGroupPointToQBlock
that is pointed by this Queue Block. |
SNMPv2-SMIUnsigned32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.11.3.1.8 |
||||||||||||||||||||||||||||||||||
|
queueGroupQBlockName
This attribute holds the name of the Queue Block.
|
OctetStringr/w | .1.3.6.1.4.1.164.6.3.11.3.1.9 |
markingProfileTable
table.1.3.6.1.4.1.164.6.3.12
·
1 row entry
·
5 columns
Marking profile table. Each profile holds a marking function which converts CoS values to Service Provider priority values.
A conceptual row where each row contains one Marking attribute.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
markingProfileIndex
Defines the Marking Profile ID.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.3.12.1.1 |
||||||||||||||||||||
|
markingProfileRowStatus
This attribute is used to create a new row or to delete an existing row
in the table. |
SNMPv2-TCRowStatusr/w Enumerated Values:
Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.6.3.12.1.2 |
||||||||||||||||||||
|
markingProfileName
This attribute defines the unique name assigned to the Marking profile.
|
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.6.3.12.1.3 |
||||||||||||||||||||
|
markingSpVlanPBit
For ETX-202A :
This attribute defines the value of the SP VLAN P-Bit that is assigned for each CoS: Octet 0 corresponds to CoS = 0 Octet 1 corresponds to CoS = 1 ... Octet 7 corresponds to CoS = 7. For L… |
OctetStringr/w | .1.3.6.1.4.1.164.6.3.12.1.4 |
||||||||||||||||||||
|
markingProfileMethod
This attribute defines the method upon which marking is done.
|
Enumerationr/w Constraints: range: 1-2000 |
.1.3.6.1.4.1.164.6.3.12.1.5 |
stkHubSecurityTable
table.1.3.6.1.4.1.164.7.1.2
·
1 row entry
·
4 columns
Hub's Security parameters.
An entry in table stkHubSecurityTable.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
stkHubSecID
Segment's security unique identification number
|
Integer32 | .1.3.6.1.4.1.164.7.1.2.1.1 |
|
stkHubSecEnable
This entry indicates whether the specific segment's security is active or not
|
Enumerationr/w | .1.3.6.1.4.1.164.7.1.2.1.2 |
|
stkHubSecurityPattern
A six-octet(48 bit) pattern: where the masked bits of stkHubSecurityMask
need to match the MAC address of each port within the segment.Value of all zeros indicates no security. |
OctetStringr/w | .1.3.6.1.4.1.164.7.1.2.1.3 |
|
stkHubSecurityMask
Mask of the allowed MAC address that can be connected through
the ports within the segment |
OctetStringr/w | .1.3.6.1.4.1.164.7.1.2.1.4 |
stkHubPrtSecurityTable
table.1.3.6.1.4.1.164.7.1.3
·
1 row entry
·
6 columns
Port Security parameters.
An entry in table stkHubPrtSecurityTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
stkHubModuleID
A unique identifier of the module(slot no.)this port is attached to.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.7.1.3.1.1 |
||||||||
|
stkHubPrtID
A unique identifier of the port within its module.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.7.1.3.1.2 |
||||||||
|
stkHubPrtSecID
A unique identifier of the security of a given port within its module.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.7.1.3.1.3 |
||||||||
|
stkHubPrtSecurityEnable
The value of this attribute determines application of the
port security. |
Enumerationr/w Constraints: range: 1-2000 |
.1.3.6.1.4.1.164.7.1.3.1.4 |
||||||||
|
stkHubPrtSecurityPattern
A six-octet(48 bit) pattern: where the masked bits of stkHubPortSecurityMask
need to match the MAC address. |
OctetStringr/w | .1.3.6.1.4.1.164.7.1.3.1.5 |
||||||||
|
stkHubPrtSecurityMask
Mask of the allowed MAC address that can be connected through
this port. The security of the individual port over writes the security of the segment where the port belongs to |
OctetStringr/w | .1.3.6.1.4.1.164.7.1.3.1.6 |
stkHubTRMdlTable
table.1.3.6.1.4.1.164.7.2.2.1
·
1 row entry
·
8 columns
Bridge Hub Module table for TR media type Contains general information about the Module
An entry in table stkHubTRMdlTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
stkHubTRMdlID
A unique identifier of the module in stack. Internal module identifier
is always 1 |
Integer32 | .1.3.6.1.4.1.164.7.2.2.1.1.1 |
||||
|
stkHubTRMdlType
Indicates the type of the module connected with specific identifier
|
Enumeration | .1.3.6.1.4.1.164.7.2.2.1.1.2 |
||||
|
stkHubTRMdlReset
When this object is set to the value of ON(3),
the module performs software reset. Upon completion, a trap will be issued to the management station and the value will be set to OFF. |
Enumerationr/w | .1.3.6.1.4.1.164.7.2.2.1.1.3 |
||||
|
stkHubTRMdlLed
This entry specifies the LEDs status in the module . Each led will
be represented by 4 bits where the first 2 bits will specify the status (NA, OFF, ON, BLINK), and the next two bits will specify the color (RED, GRE… |
OctetString Enumerated Values:
|
.1.3.6.1.4.1.164.7.2.2.1.1.4 |
||||
|
stkHubTRMdlSpeed
Attribute describing the bandwidth of the media as set by the module
switch. For certain products, if the value of stkHubTRMdlMngState is 'enabled', then stkHubTRMdlSpeed can be set to the desired value. Else, … |
Enumerationr/w | .1.3.6.1.4.1.164.7.2.2.1.1.5 |
||||
|
stkHubTRMdlMngState
This object indicates the status of the Manage switch
as set on the back panel of the main module. 'enabled' - means that management can override setting of some HW switch/es. |
Enumeration | .1.3.6.1.4.1.164.7.2.2.1.1.6 |
||||
|
stkHubTRMdlAutodisable
Attribute describing the status of port Autodisable
mechanism, that protects against inserting in Token Ring adapters at the wrong speed. For certain products, if the value of stkHubTRMdlMngState is 'enabled', then s… |
Enumerationr/w Constraints: range: 1-200 |
.1.3.6.1.4.1.164.7.2.2.1.1.7 |
||||
|
stkHubTRMdlConfigMsg
Full configuration message coded in internal RND application format.
This entry describes module' configuration. |
OctetString Constraints: range: 0-100 |
.1.3.6.1.4.1.164.7.2.2.1.1.8 |
stkHubTRPrtTable
table.1.3.6.1.4.1.164.7.2.3.1
·
1 row entry
·
12 columns
Bridge Hub port table for TR media type Contains general information about the ports.
An entry in table stkHubTRPrtTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
stkHubTRPrtMdlID
A unique identifier of the module this port is attached to.
|
SNMPv2-SMIInteger32 Constraints: range: 0-255Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.7.2.3.1.1.1 |
||||||||
|
stkHubTRPrtID
A unique identifier of the port within its module.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.7.2.3.1.1.2 |
||||||||
|
stkHubTRPrtFunctionality
Describes the functionality of the port in a Token ring topology
|
Enumeration | .1.3.6.1.4.1.164.7.2.3.1.1.3 |
||||||||
|
stkHubTRPrtConnectorType
Type of hardware connector in the port.
|
Enumeration | .1.3.6.1.4.1.164.7.2.3.1.1.4 |
||||||||
|
stkHubTRPrtAdminCmd
By setting this attribute to DISABLE(2) or SHORT(4) the
management station can force this lobe/port-connection to be removed and block any access to the network via this lobe/port. It is not mandatory that a certain … |
Enumerationr/w Constraints: range: 1-200 |
.1.3.6.1.4.1.164.7.2.3.1.1.5 |
||||||||
|
stkHubTRPrtActiveState
This attribute describes the electrical or optical activity
state of a lobe or the state of a port. Certain values may not be applicable in some cases |
Enumeration Constraints: range: 0-100 |
.1.3.6.1.4.1.164.7.2.3.1.1.6 |
||||||||
|
stkHubTRPrtTrapMaskEnable
When this attribute is set to OFF by the management console the
agent starts sending the unmasked traps related to this port. Otherwise no traps from this port are sent. |
Enumerationr/w | .1.3.6.1.4.1.164.7.2.3.1.1.7 |
||||||||
|
stkHubTRPrtStatus
This attribute indicates the status of this lobe/port connection:
DISABLED-(2) to (6) indicates the reason for the disabled state. INSERTED(7)indicates that the lobe hardware inserts this lobe into the ring , thus it b… |
Enumeration Constraints: range: 0-12 |
.1.3.6.1.4.1.164.7.2.3.1.1.8 |
||||||||
|
stkHubTRPrtCableProtectEnable
The value of this attribute determines activation of the cable-fault
protection mechanism of TCR and the optical link mechanism of TFR and TFC . |
Enumeration Constraints: range: 0-255 |
.1.3.6.1.4.1.164.7.2.3.1.1.9 |
||||||||
|
stkHubTRPrtFlipProtectEnable
The value of this attribute determines activation of the flipping-lobe
protection mechanism of the port. |
Enumerationr/w | .1.3.6.1.4.1.164.7.2.3.1.1.10 |
||||||||
|
stkHubTRPrtMACAddress
The value of this object is the specific MAC address
of this interface which uniquely identifies this Interface on a ring. |
MacAddress Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.7.2.3.1.1.11 |
||||||||
|
stkHubTRPrtType
Type of the port specific hardware
|
Enumeration | .1.3.6.1.4.1.164.7.2.3.1.1.12 |
stkHubETMdlTable
table.1.3.6.1.4.1.164.7.3.2.1
·
1 row entry
·
3 columns
Bridge Hub Module table for ET media type Contains general information about the Module
An entry in table stkHubETMdlTable.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
stkHubETMdlID
A unique identifier of the module in stack. Internal module identifier
is always 1 |
Integer32 | .1.3.6.1.4.1.164.7.3.2.1.1.1 |
|
stkHubETMdlLed
This entry specifies the LEDs status in the module . Each led will
be represented by 4 bits where the first 2 bits will specify the status (NA, OFF, ON, BLINK), and the next two bits will specify the color (RED, GRE… |
OctetString | .1.3.6.1.4.1.164.7.3.2.1.1.2 |
|
stkHubETMdlReset
When this object is set to the value of hwReset(3),
the module performs HW reset. When this object is set to the value of configReset(4), the module performs Configuration reset. Upon completion, a trap will be is… |
Enumerationr/w | .1.3.6.1.4.1.164.7.3.2.1.1.3 |
pktSwchRoutSTable
table.1.3.6.1.4.1.164.8.1.2.1
·
1 row entry
·
10 columns
The Scratch Routing Table defines the routes for incoming and outgoing data on the device.
Defines the contents of each line in the Scratch Routing Table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchRoutIdS
Index of the pktSwchRoutSTable.
|
Integer32 | .1.3.6.1.4.1.164.8.1.2.1.1.1 |
||||||||
|
pktSwchRoutAddressS
The address to which the entry applies. The use of the octet
string syntax allows the use of the letter x as a wild card in the addresses. |
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.1.2.1.1.2 |
||||||||
|
pktSwchRoutDestLink1S
First destination link through which the data will be routed.
For X.25 destination: any valid x.25 link no. For Frame Relay Link: any valid dlci with an x.25 encapsulation protocol, presented in th… |
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.1.2.1.1.3 |
||||||||
|
pktSwchRoutDestLink2S
Second destination link through which the data will be routed.
For X.25 destination: any valid x.25 link no. For Frame Relay Link: any valid dlci with an x.25 encapsulation protocol, presented in t… |
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.1.2.1.1.4 |
||||||||
|
pktSwchRoutDestLink3S
Third destination link through which the data will be routed.
For X.25 destination: any valid x.25 link no. For Frame Relay Link: any valid dlci with an x.25 encapsulation protocol, presented in th… |
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.1.2.1.1.5 |
||||||||
|
pktSwchRoutLinkPrio1S
A priority of the associated destination of link 1.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.1.2.1.1.6 |
||||||||
|
pktSwchRoutLinkPrio2S
A priority of the associated destination of link 2.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.1.2.1.1.7 |
||||||||
|
pktSwchRoutLinkPrio3S
A priority of the associated destination of link 3.
|
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.1.2.1.1.8 |
||||||||
|
pktSwchRoutSearchStatusS
off - The device stops searching for a matching address.
on - The device continues searching for a matching address in the links of the next entry. |
Enumerationr/w | .1.3.6.1.4.1.164.8.1.2.1.1.9 |
||||||||
|
pktSwchRoutStatusS
The status of this routing table entry. The choices are those defined in the SNMPv2 Textual
Conventions for RowStatus. This will allow easy replacement of the INTEGER syntax with the RowStatus textual convention SYNTA… |
Enumerationr/w | .1.3.6.1.4.1.164.8.1.2.1.1.10 |
pktSwchRoutATable
table.1.3.6.1.4.1.164.8.1.2.2
·
1 row entry
·
9 columns
The Active Routing Table defines the active routes for incoming and outgoing data on the device.
Defines the contents of each line in the Active Routing Table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchRoutIdA
Index of the pktSwchRoutATable.
|
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.8.1.2.2.1.1 |
||||||||
|
pktSwchRoutAddressA
The address to which the entry applies. The use of the octet string syntax allows
the use of the letter x as a wild card in the addresses. |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.1.2.2.1.2 |
||||||||
|
pktSwchRoutDestLink1A
First destination link through which the data will be routed.
For X.25 destination: any valid x.25 link no. For Frame Relay Link: any valid dlci with an x.25 encapsulation protocol, presented in th… |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.1.2.2.1.3 |
||||||||
|
pktSwchRoutDestLink2A
Second destination link through which the data will be routed.
For X.25 destination: any valid x.25 link no. For Frame Relay Link: any valid dlci with an x.25 encapsulation protocol, presented in t… |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.1.2.2.1.4 |
||||||||
|
pktSwchRoutDestLink3A
Third destination link through which the data will be routed.
For X.25 destination: any valid x.25 link no. For Frame Relay Link: any valid dlci with an x.25 encapsulation protocol, presented in th… |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.1.2.2.1.5 |
||||||||
|
pktSwchRoutLinkPrio1A
A priority of the associated destination of link 1.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.1.2.2.1.6 |
||||||||
|
pktSwchRoutLinkPrio2A
A priority of the associated destination of link 2.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.1.2.2.1.7 |
||||||||
|
pktSwchRoutLinkPrio3A
A priority of the associated destination of link 3.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.1.2.2.1.8 |
||||||||
|
pktSwchRoutSearchStatusA
off - The device stops searching for a matching address.
on - The device continues searching for a matching address in the links of the next entry. |
Enumeration | .1.3.6.1.4.1.164.8.1.2.2.1.9 |
pktSwchPvcSTable
table.1.3.6.1.4.1.164.8.1.2.3
·
1 row entry
·
6 columns
The Scratch Network PVC Table defines the network PVCs.
Defines the contents of each line in the Scratch Network PVC table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchPvcNumS
The PVC number corresponding to this entry.
|
Integer32 | .1.3.6.1.4.1.164.8.1.2.3.1.1 |
||||||||
|
pktSwchPvcSrcLinkS
The number of the link (1 through 6 for SPS-6 and 1 through 12 for SPS-12) that will be
used as a source link to create a connection by means of the PVC. 0 means that the PVC will not be active, 100 means that this pvc… |
Integer32r/w | .1.3.6.1.4.1.164.8.1.2.3.1.2 |
||||||||
|
pktSwchPvcSrcLcnS
Network pvc:
The number of the logical channel (0-255) that will be used as the source logical channel to create a connection by means of the PVC. Local pvc: For asynchronous channel to X.25 PVC, Any va… |
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.1.2.3.1.3 |
||||||||
|
pktSwchPvcDstLinkS
The number of the destination link that will be used.
0 means that the PVC will not be active. |
Integer32r/w | .1.3.6.1.4.1.164.8.1.2.3.1.4 |
||||||||
|
pktSwchPvcDstLcnS
The number of the logical channel for the destination link.
|
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.1.2.3.1.5 |
||||||||
|
pktSwchPvcStatusS
The status of this Network PVC table entry. The choices are those defined in the SNMPv2
Textual Conventions for RowStatus. This will allow easy replacement of the INTEGER syntax with the RowStatus textual convention S… |
Enumerationr/w | .1.3.6.1.4.1.164.8.1.2.3.1.6 |
pktSwchPvcATable
table.1.3.6.1.4.1.164.8.1.2.4
·
1 row entry
·
5 columns
The Active Network PVC Table defines the active network PVCs.
Defines the contents of each line in the Active Network PVC table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
pktSwchPvcNumA
The PVC number corresponding to this entry.
|
Integer32 | .1.3.6.1.4.1.164.8.1.2.4.1.1 |
||||
|
pktSwchPvcSrcLinkA
The number of the link (1 through 6 for SPS-6 and 1 through 12 for SPS-12) that is
used as a source link to create a connection by means of the PVC. 0 means that the PVC will not be active, 100 means that this pvc is L… |
Integer32 | .1.3.6.1.4.1.164.8.1.2.4.1.2 |
||||
|
pktSwchPvcSrcLcnA
Network pvc:
The number of the logical channel (0-255) that will be used as the source logical channel to create a connection by means of the PVC. Local pvc: For asynchronous channel to X.25 PVC, Any va… |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.1.2.4.1.3 |
||||
|
pktSwchPvcDstLinkA
The number of the destination link that is used.
0 means that the PVC will not be active. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.8.1.2.4.1.4 |
||||
|
pktSwchPvcDstLcnA
The number of the logical channel for the destination link.
|
Integer32 | .1.3.6.1.4.1.164.8.1.2.4.1.5 |
pktSwchNuiSTable
table.1.3.6.1.4.1.164.8.1.3.1
·
1 row entry
·
7 columns
The NUI Table defines the NUIs that can be used by the device.
Defines the contents of each line in the NUI Table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchNuiIndexS
The index of this entry.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.1.3.1.1.1 |
||||||||
|
pktSwchNuiGroupIdS
The group Id for this NUI entry.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.1.3.1.1.2 |
||||||||
|
pktSwchNuiInPasswdS
The password for the incoming call. 15 chars.
|
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.1.3.1.1.3 |
||||||||
|
pktSwchNuiOutPasswdPointerS
A pointer to the password in the OutPasswdTable for an outgoing call.
|
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.1.3.1.1.4 |
||||||||
|
pktSwchNuiInAddrS
The addresss for the incoming call. 15 digits.
|
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.1.3.1.1.5 |
||||||||
|
pktSwchNuiOutAddrPointerS
A pointer to the address in the OutAddrTable for an outgoing call.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.1.3.1.1.6 |
||||||||
|
pktSwchNuiStatusS
The status of this NUI table entry. The choices are those defined in the SNMPv2 Textual
Conventions for RowStatus. This will allow easy replacement of the INTEGER syntax with the RowStatus textual convention SYNTAX. |
Enumerationr/w | .1.3.6.1.4.1.164.8.1.3.1.1.7 |
pktSwchNuiATable
table.1.3.6.1.4.1.164.8.1.3.2
·
1 row entry
·
7 columns
The NUI Table defines the NUIs that can be used by the device.
Defines the contents of each line in the NUI Table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchNuiIndexA
The index of this entry.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.1.3.2.1.1 |
||||||||
|
pktSwchNuiGroupIdA
The group Id for this NUI entry.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.1.3.2.1.2 |
||||||||
|
pktSwchNuiInPasswdA
The password for the incoming call. 15 chars.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.1.3.2.1.3 |
||||||||
|
pktSwchNuiOutPasswdPointerA
A pointer to the password in the OutPasswdTable for an outgoing call.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.1.3.2.1.4 |
||||||||
|
pktSwchNuiInAddrA
The addresss for the incoming call. 15 digits.
|
SNMPv2-TCDisplayString Constraints: range: 1-200Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.1.3.2.1.5 |
||||||||
|
pktSwchNuiOutAddrPointerA
A pointer to the address in the OutAddrTable for an outgoing call.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.1.3.2.1.6 |
||||||||
|
pktSwchNuiStatusA
The status of this NUI table entry. The choices are those defined in the SNMPv2 Textual
Conventions for RowStatus. This will allow easy replacement of the INTEGER syntax with the RowStatus textual convention SYNTAX. |
Enumeration | .1.3.6.1.4.1.164.8.1.3.2.1.7 |
.1.3.6.1.4.1.164.8.1.3.3
·
1 row entry
·
3 columns
The table defines the passwords that can be used by the device.
Defines the contents of each line in OutPasswd Table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchNuiOutPasswdIndexS
The index of this entry.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.1.3.3.1.1 |
||||||||
|
pktSwchNuiOutPasswdValueS
The password of this entry. 15 chars.
|
SNMPv2-TCDisplayStringr/w Enumerated Values:
Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.1.3.3.1.2 |
||||||||
|
pktSwchNuiOutPasswdStatusS
The status of this NuiOutPasswd table entry.
|
Enumerationr/w | .1.3.6.1.4.1.164.8.1.3.3.1.3 |
.1.3.6.1.4.1.164.8.1.3.4
·
1 row entry
·
3 columns
The table defines the passwords that can be used by the device.
Defines the contents of each line in OutPasswd Table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
pktSwchNuiOutPasswdIndexA
The index of this entry.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.1.3.4.1.1 |
|
pktSwchNuiOutPasswdValueA
The password of this entry. 15 chars.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.1.3.4.1.2 |
|
pktSwchNuiOutPasswdStatusA
The status of this NuiOutPasswd table entry.
|
Enumeration Constraints: range: 1-200 |
.1.3.6.1.4.1.164.8.1.3.4.1.3 |
pktSwchNuiOutAddrSTable
table.1.3.6.1.4.1.164.8.1.3.5
·
1 row entry
·
3 columns
The table defines the Addresses that can be used by the device.
Defines the contents of each line in OutAddr Table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchNuiOutAddrIndexS
The index of this entry.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.1.3.5.1.1 |
||||||||||||||||||
|
pktSwchNuiOutAddrValueS
The address of this entry. 15 digits.
|
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.1.3.5.1.2 |
||||||||||||||||||
|
pktSwchNuiOutAddrStatusS
The status of this NuiOutAddr table entry.
|
Enumerationr/w | .1.3.6.1.4.1.164.8.1.3.5.1.3 |
pktSwchNuiOutAddrATable
table.1.3.6.1.4.1.164.8.1.3.6
·
1 row entry
·
3 columns
The table defines the Addresses that can be used by the device.
Defines the contents of each line in OutAddr Table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
pktSwchNuiOutAddrIndexA
The index of this entry.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.1.3.6.1.1 |
||||||
|
pktSwchNuiOutAddrValueA
The address of this entry. 15 digits.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.1.3.6.1.2 |
||||||
|
pktSwchNuiOutAddrStatusA
The status of this NuiOutAddr table entry.
|
Enumeration | .1.3.6.1.4.1.164.8.1.3.6.1.3 |
pktSwchMngX25TrapIpTable
table.1.3.6.1.4.1.164.8.1.4.1
·
1 row entry
·
5 columns
This table indicates the destination address of the traps. Internally it will be limited to ten addresses.
An entry in table pktSwchMngX25TrapIpTable.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
pktSwchMngID
This value indicates an index of a specific IP address
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.1.4.1.1.1 |
|
pktSwchMngIP
This value indicates the destination address of the traps. IP 0.0.0.0 removes the entry.
|
RFC1155-SMIIpAddressr/w | .1.3.6.1.4.1.164.8.1.4.1.1.2 |
|
pktSwchMngPhyAddr
deprecated
This value indicates the physical destination address of the traps.
|
SNMPv2-TCDisplayStringr/w Constraints: range: 0-60000Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.1.4.1.1.3 |
|
pktSwchTrapEnable
This value indicates which traps should be sent.
The value is a sum of values (powers of two), where each value in the sum represents a trap that should be reported to the Management Station. The values that may be incl… |
SNMPv2-SMIInteger32r/w Constraints: range: 0-65535Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.1.4.1.1.4 |
|
pktSwchEncapsulationMode
deprecated
Format type for IP over X25
|
Enumerationr/w | .1.3.6.1.4.1.164.8.1.4.1.1.5 |
pktSwchXidSTable
table.1.3.6.1.4.1.164.8.1.5.1
·
1 row entry
·
5 columns
The Exchange Id table contains a list of 13 incoming pairs of allowed dial-up phone numbers and passwords. Also included is one pair of outgoing phone number and password (InternalIndex=14).
An entry in table pktSwchXidSTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
pktSwchXidIndexS
This Index of the XID table.
|
SNMPv2-SMIInteger32 Constraints: range: 0-126Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.1.5.1.1.1 |
||||||
|
pktSwchXidInternalIndexS
An internal index for each XidIndex of the table. The first 13 entries
refer to Incoming calls. The 14th entry refers to an Outgoing call. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.1.5.1.1.2 |
||||||
|
pktSwchXidPasswdS
Password of size 16 chars.
|
SNMPv2-TCDisplayStringr/w Constraints: range: 0-127Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.1.5.1.1.3 |
||||||
|
pktSwchXidPhoneS
Phone number of size 16 digits.
|
SNMPv2-TCDisplayStringr/w Constraints: range: 0-255Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.1.5.1.1.4 |
||||||
|
pktSwchXidStatusS
The status of the XID table entry. The status applies to the XidIndex,
i.e., setting the staus to invalid results in the removal of all the InternalIndex entries (1..14) belonging to the relevant XidIndex. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.1.5.1.1.5 |
pktSwchXidATable
table.1.3.6.1.4.1.164.8.1.5.2
·
1 row entry
·
5 columns
The Exchange Id table contains a list of 13 incoming pairs of allowed dial-up phone numbers and passwords. Also included is one pair of outgoing phone number and password (InternalIndex=14).
An entry in table pktSwchXidATable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchXidIndexA
This Index of the XID table.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.1.5.2.1.1 |
||||||||||||||||||||||||||
|
pktSwchXidInternalIndexA
An internal index for each XidIndex of the table. The first 13 entries
refer to Incoming calls. The 14th entry refers to an Outgoing call. |
SNMPv2-SMIInteger32 Constraints: range: 0-127Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.1.5.2.1.2 |
||||||||||||||||||||||||||
|
pktSwchXidPasswdA
Password of size 16 chars.
|
SNMPv2-TCDisplayString Constraints: range: 0-255Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.1.5.2.1.3 |
||||||||||||||||||||||||||
|
pktSwchXidPhoneA
Phone number of size 16 digits.
|
SNMPv2-TCDisplayString Enumerated Values:
Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.1.5.2.1.4 |
||||||||||||||||||||||||||
|
pktSwchXidStatusA
The status of the XID table entry. The status applies to the XidIndex,
i.e., setting the staus to invalid results in the removal of all the InternalIndex entries (1..14) belonging to the relevant XidIndex. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.8.1.5.2.1.5 |
pktSwchIpRoutSTable
table.1.3.6.1.4.1.164.8.1.6.1
·
1 row entry
·
10 columns
The Scratch Routing Table defines the routes for incoming and outgoing ip datagrams on the device.
Defines the contents of each line in the Scratch IP Routing
Table.
Table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchIpRoutIdS
Index of the pktSwchIpRoutSTable.
|
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.8.1.6.1.1.1 |
||||||||||
|
pktSwchIpRoutIpAddressS
The IP address to which the entry applies.
A string of the format: X.X.X.X where every X is a number in the range 0-255. |
RFC1155-SMIIpAddressr/w Constraints: range: 0-127Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.8.1.6.1.1.2 |
||||||||||
|
pktSwchIpRoutIpMaskS
The IP mask to which the entry applies.
A string of the format: X.X.X.X where every X is a number in the range 0-255. |
RFC1155-SMIIpAddressr/w Constraints: range: 0-127Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.8.1.6.1.1.3 |
||||||||||
|
pktSwchIpRoutDestProtocolS
deprecated
Destination protocol for the associated address.
None(255) when not used |
Enumerationr/w Constraints: range: 0-127 |
.1.3.6.1.4.1.164.8.1.6.1.1.4 |
||||||||||
|
pktSwchIpRoutDestinationS
deprecated
Destination for the associated address.
Possible values: Default : Not Used. X.25 PVC: Port:LCN or a pre defined PVC number X.25 SVC: X.25 Addr or cid followed by a predefined Call ID number Frame Relay: P… |
SNMPv2-TCDisplayStringr/w Constraints: range: 0-126Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.1.6.1.1.5 |
||||||||||
|
pktSwchIpRoutInactivityS
deprecated
Inactivity time in steps of 50 mili seconds for X25 SVC
protocol only. Range: 0..255. Default: 2. |
SNMPv2-SMIInteger32r/w Constraints: range: 0-255Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.1.6.1.1.6 |
||||||||||
|
pktSwchIpRoutStatusS
The status of this routing table entry. The choices are those
defined in the SNMPv2 Textual Conventions for RowStatus. This will allow easy replacement of the INTEGER syntax with the RowStatus textual convention SYNTAX. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.1.6.1.1.7 |
||||||||||
|
pktSwchIpRoutMetricS
No. of hops for this route.
The default value is 1. Legal values: 1 to the max no. of hops this device will support. The max no. is defined by pktSwchIpGlobalMaxHopCount. |
SNMPv2-SMIInteger32r/w Constraints: range: 0-255Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.1.6.1.1.8 |
||||||||||
|
pktSwchIpRoutNextHopS
IP address of the next hop.
A string of the format: X.X.X.X where every X is a number in the range 0-255. |
RFC1155-SMIIpAddressr/w | .1.3.6.1.4.1.164.8.1.6.1.1.9 |
||||||||||
|
pktSwchIpRoutInterfaceIdS
ID of the logical IP interface in the pktSwchIpInterface table.
The IP routing module will route the IP frame according to this interface ID. Legal values: 1 to 200 and 65535. 1-200 : ID of interface. 65535 : No IP inte… |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.1.6.1.1.10 |
pktSwchIpRoutATable
table.1.3.6.1.4.1.164.8.1.6.2
·
1 row entry
·
12 columns
The Active Routing Table defines the active routes for incoming and outgoing ip datagrams on the device.
Defines the contents of each line in the Active IP Routing Table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchIpRoutIdA
Index of the IP pktSwchIpRoutATable.
|
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.164.8.1.6.2.1.1 |
||||||||
|
pktSwchIpRoutIpAddressA
The IP address to which the entry applies.
A string of the format: X.X.X.X where every X is a number in the range 0-255. |
RFC1155-SMIIpAddress Constraints: range: 0-255Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.8.1.6.2.1.2 |
||||||||
|
pktSwchIpRoutIpMaskA
The IP mask to which the entry applies.
A string of the format: X.X.X.X where every X is a number in the range 0-255. |
RFC1155-SMIIpAddress Constraints: range: 0-127Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.8.1.6.2.1.3 |
||||||||
|
pktSwchIpRoutDestProtocolA
deprecated
Destination protocol for the associated address.
None(255) when not used. |
Enumeration Constraints: range: 0-127 |
.1.3.6.1.4.1.164.8.1.6.2.1.4 |
||||||||
|
pktSwchIpRoutDestinationA
deprecated
Destination for the associated address.
Possible values: Default : Not Used. X.25 PVC: Port:LCN or a pre defined PVC number X.25 SVC: X.25 Addr or cid followed by a predefined Call ID number Frame Relay: P… |
SNMPv2-TCDisplayString Constraints: range: 0-127Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.1.6.2.1.5 |
||||||||
|
pktSwchIpRoutInactivityA
deprecated
Inactivity time in steps of 50 mili seconds for X25 SVC
protocol only. Range: 0..255. Default: 2. |
SNMPv2-SMIInteger32 Constraints: range: 0-127Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.1.6.2.1.6 |
||||||||
|
pktSwchIpRoutBuffsInA
The number of packets in the Input buffer link list,
received but not routed yet. |
SNMPv2-SMICounter32 Constraints: range: 0-255Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.1.6.2.1.7 |
||||||||
|
pktSwchIpRoutBuffsOutA
The number of packets in the Output buffer link list,
routed but not sent yet. |
SNMPv2-SMICounter32 Constraints: range: 0-255Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.1.6.2.1.8 |
||||||||
|
pktSwchIpRoutFCA
This is the flow control status of this ip routing
entry\connection |
Enumeration Constraints: range: 0-255 |
.1.3.6.1.4.1.164.8.1.6.2.1.9 |
||||||||
|
pktSwchIpRoutMetricA
No. of hops for this route.
The default value is 1. Legal values: 1 to the max no. of hops this device will support. The max no. is defined by pktSwchIpGlobalMaxHopCount. |
SNMPv2-SMIInteger32 Constraints: range: 0-5Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.1.6.2.1.10 |
||||||||
|
pktSwchIpRoutNextHopA
IP address of the next hop.
A string of the format: X.X.X.X where every X is a number in the range 0-255. |
RFC1155-SMIIpAddress Enumerated Values:
Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.8.1.6.2.1.11 |
||||||||
|
pktSwchIpRoutInterfaceIdA
ID of the logical IP interface in the pktSwchIpInterface table.
The IP routing module will route the IP frame according to this interface ID. Legal values: 1 to 200 and 65535. 1-200 : ID of interface. 65535 : No IP inte… |
SNMPv2-SMIInteger32 Constraints: range: 0-20Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.1.6.2.1.12 |
pktSwchTxPriorityTable
table.1.3.6.1.4.1.164.8.1.7.2
·
1 row entry
·
3 columns
The Tx Priorities table.
The Tx Priority Entry defines the max delay time and max queue
length for each Priority level.
length for each Priority level.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
pktSwchTxPriorityLevel
Level of an entry in the Tx Priority Table.
At present, the PS supports 4 priority levels. Default level: 1 |
Integer32 | .1.3.6.1.4.1.164.8.1.7.2.1.1 |
|
pktSwchTxPriorityMaxDelayTime
Max delay time in Tx queue (in 100 msec intervals).
Each frame will wait no more than the Max delay time until it is handled. 0 means that the delay is Unlimited. Default value: 0 |
Integer32r/w | .1.3.6.1.4.1.164.8.1.7.2.1.2 |
|
pktSwchTxPriorityMaxQueueLen
Max allowed length of the Tx queue. Frames will be discarded
if the length is exceeded. 0 means that the queue is of Unlimited length. Default value: 0 |
Integer32r/w Constraints: range: 1-200 |
.1.3.6.1.4.1.164.8.1.7.2.1.3 |
pktSwchProfileSTable
table.1.3.6.1.4.1.164.8.2.1.1
·
1 row entry
·
41 columns
The Profile Table S defines the Scratch profiles that the PS can use to configure a channel.
Defines the contents of each line in the Profile Table S.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchProfileNumberS
The number by which a profile is identified. This is also used as the index for the profile table.
The maximum profile number is 200. |
Integer32 Constraints: range: 0-127 |
.1.3.6.1.4.1.164.8.2.1.1.1.1 |
||||||||||||||||||||||||||
|
pktSwchProfileRecallCharS
The character specified by this entry is used to escape from the data transfer
mode and enter the PAD command mode. The integer values have the following meanings: (0) PAD recall is not possible (1)… |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.164.8.2.1.1.1.2 |
||||||||||||||||||||||||||
|
pktSwchProfileEchoS
This determines if an echo of the input characters is retured to the DTE.
The options are either 'echo enabled' or 'no echo'. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.2.1.1.1.3 |
||||||||||||||||||||||||||
|
pktSwchProfileDataForwCharS
The value is a sum of values (powers of two), where each value in the sum represents
a character (or characters) that is (are) used as a data forwarding character. The data forwarding characters are used to instruct th… |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.2.1.1.1.4 |
||||||||||||||||||||||||||
|
pktSwchProfileIdleTimerS
Packets will be forwarded when the idle timer expires. The idle time interval is specified
as a multiple of 50 milliseconds. The multiple is given by the parameter value. For example, a value of 60 sets an interval o… |
Integer32r/w Constraints: range: 0-31 |
.1.3.6.1.4.1.164.8.2.1.1.1.5 |
||||||||||||||||||||||||||
|
pktSwchProfileDevFlowContS
This parameter determines whether or not the PAD uses software flow control for the
attached device. The options are either (1) PAD uses flow control during data transfer mode, (2) PAD uses flow control both in the da… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.2.1.1.1.6 |
||||||||||||||||||||||||||
|
pktSwchProfileServSigS
This parameter is used to instruct the PAD whether to transfer PAD service signals and
the PAD prompt to the local DTE in standard format. The options are (1) PAD service signals are transmitted to the DTE using the st… |
Enumerationr/w Constraints: range: 0-127 |
.1.3.6.1.4.1.164.8.2.1.1.1.7 |
||||||||||||||||||||||||||
|
pktSwchProfileBreakS
The value is a sum of values (powers of two), where each value in the sum represents
a PAD operation on receipt of the break signal from the DTE. The values that may be included in the sum and their meanings are: 0 No… |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.164.8.2.1.1.1.8 |
||||||||||||||||||||||||||
|
pktSwchProfileDiscOutS
This parameter instructs the PAD whether to forward the user sequences included in
data packets to the local DTE or discard them. The options are (1) discard output or (2) normal data delivery. If the value of radSPS… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.8.2.1.1.1.9 |
||||||||||||||||||||||||||
|
pktSwchProfileCRPaddingS
This parameter specifies the number of padding characters to be added after a carriage
return character is transmitted to the local DTE. |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.2.1.1.1.10 |
||||||||||||||||||||||||||
|
pktSwchProfileLineFoldS
This parameter specifies the maximum number of characters to be inserted before the
format effector. If the value is zero, there is no insertion of a format effector (line folding). |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.2.1.1.1.11 |
||||||||||||||||||||||||||
|
pktSwchProfileSpeedS
This parameter determines the rate of data transmission to and from the DTE.
|
Enumerationr/w Constraints: range: 0-255 |
.1.3.6.1.4.1.164.8.2.1.1.1.12 |
||||||||||||||||||||||||||
|
pktSwchProfilePadFlowContS
This determines whether or not the terminal can exercise flow control over the PAD.
The options are either 'device can exercise flow control' or 'device cannot exercise flow control. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.2.1.1.1.13 |
||||||||||||||||||||||||||
|
pktSwchProfileLineFeedInsertS
This parameter indicates when there is a line feed insertion after CR. The options are
(1) Insert line feed after transmission of CR to the DTE, (2) Insert line feed after receipt of CR from the DTE, (4) Insert line fe… |
Enumerationr/w Constraints: range: 0-127 |
.1.3.6.1.4.1.164.8.2.1.1.1.14 |
||||||||||||||||||||||||||
|
pktSwchProfileLineFeedPadS
This parameter specifies the number of padding characters to be added after a line
feed. |
Integer32r/w Constraints: range: 0-127 |
.1.3.6.1.4.1.164.8.2.1.1.1.15 |
||||||||||||||||||||||||||
|
pktSwchProfileEditingS
This parameter specifies the editing capabilities available in the data transfer mode.
Editing is always possible when the PAD is in the command mode. The options are (1) Command editing in the data trasfer mode is en… |
Enumerationr/w Constraints: range: 0-127 |
.1.3.6.1.4.1.164.8.2.1.1.1.16 |
||||||||||||||||||||||||||
|
pktSwchProfileCharDelS
This parameter specifies the character delete, which is one character from IA5. The default
selection is 127 (character DEL). |
Integer32r/w Constraints: range: 0-126 |
.1.3.6.1.4.1.164.8.2.1.1.1.17 |
||||||||||||||||||||||||||
|
pktSwchProfileLineDelS
This parameter specifies the line delete (last line stored in the edit buffer), which is one character from IA5. The default
selection is 24 (character CAN). |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.164.8.2.1.1.1.18 |
||||||||||||||||||||||||||
|
pktSwchProfileLineDispS
This entry specifies the line display character, which is one character
from IA5. The default selection is 18 (character DC2). |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.2.1.1.1.19 |
||||||||||||||||||||||||||
|
pktSwchProfileEditServSigS
This entry specifies the editing PAD service signals.
The integer values have the following meanings: (0) No editing PAD service signals (1) Editing PAD service signals for printing t… |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.164.8.2.1.1.1.20 |
||||||||||||||||||||||||||
|
pktSwchProfileEchomaskS
The value is a sum of values (powers of two), where each value in the sum represents
a character (or characters) that is (are) included in the echo mask. The characters in the echo mask are not echoed to the DTE when P… |
Integer32r/w Constraints: range: 5-8 |
.1.3.6.1.4.1.164.8.2.1.1.1.21 |
||||||||||||||||||||||||||
|
pktSwchProfileParTreatS
This entry controls the generation of parity bits in the data sent to the local DTE and the
checking of the parity bit when generated by the local DTE. The options are (1) parity checking is enabled, (2) parity generat… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.2.1.1.1.22 |
||||||||||||||||||||||||||
|
pktSwchProfilePageWaitS
This entry specifies the number of line feed characters counted by the PAD before the
page wait condition is entered. If the value is zero, page wait is disabled. |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.2.1.1.1.23 |
||||||||||||||||||||||||||
|
pktSwchProfileBitsPerCharS
The number of data bits per character supported by the PAD.
|
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.2.1.1.1.24 |
||||||||||||||||||||||||||
|
pktSwchProfileDvParityS
This entry selects the type of parity to be checked and or generated by the PAD
when radSPSProfileParTreat is a value other than 255. The options are (1) space parity, (2) mark parity, (3) even parity, (4) odd parity,… |
Enumerationr/w Constraints: range: 0-255 |
.1.3.6.1.4.1.164.8.2.1.1.1.25 |
||||||||||||||||||||||||||
|
pktSwchProfileStopBitsS
This entry indicates the number of stop bits per character supported by the PAD.
The options are either (1) one stop bit, (2) two stop bits, or (3) 1.5 stop bits. |
Enumerationr/w Constraints: range: 1-255 |
.1.3.6.1.4.1.164.8.2.1.1.1.26 |
||||||||||||||||||||||||||
|
pktSwchProfileSpecFlowS
This entry is used to define additional flow control possiblilites.
The options are either (1) Flow control by means of the terminal DTR line or (2) No special flow control. |
Enumerationr/w Constraints: range: 0-127 |
.1.3.6.1.4.1.164.8.2.1.1.1.27 |
||||||||||||||||||||||||||
|
pktSwchProfileCountFwdS
This entry can be used to instruct the PAD to complete the assembly of a packet
and to forward it after the specifed number of characters has been received. If the value is zero, count forwarding is disabled. |
Integer32r/w Constraints: range: 0-127 |
.1.3.6.1.4.1.164.8.2.1.1.1.28 |
||||||||||||||||||||||||||
|
pktSwchProfileEscDelayS
This entry can be used to instruct the PAD whether to delay the forwarding of
a data packet when an escape character is detected in the data stream and to determine the required delay. The packet forwarding is delayed … |
Integer32r/w Constraints: range: 0-127 |
.1.3.6.1.4.1.164.8.2.1.1.1.29 |
||||||||||||||||||||||||||
|
pktSwchProfileCharBreakS
This entry specifies the decimal value of the character that will be interpreted
as an additional break signal by the PAD. A value of zero indicates no break character. |
Integer32r/w Constraints: range: 0-127 |
.1.3.6.1.4.1.164.8.2.1.1.1.30 |
||||||||||||||||||||||||||
|
pktSwchProfileCharSuppressS
This entry specifies the decimal value of the character that will toggle
echo suppression in the PAD. A value of zero indicates that echo suppression is only controlled by radSPSProfileEcho. |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.164.8.2.1.1.1.31 |
||||||||||||||||||||||||||
|
pktSwchProfileCharSubsS
This entry specifies the decimal value of the character that will be echoed
instead of the character received from the user's DTE. A zero value indicates that no character is echoed. |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.164.8.2.1.1.1.32 |
||||||||||||||||||||||||||
|
pktSwchProfileFormFeedPadS
This entry specifies the number of padding (NUL) characters that will be
automatically sent after the form feed character. |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.164.8.2.1.1.1.33 |
||||||||||||||||||||||||||
|
pktSwchProfileInactivityS
This entry specifies the number of minutes after which the PAD will forward
the accumulated data and clear the call. A zero value indicates no disconnection on inactivity. |
Integer32r/w Constraints: range: 0-5 |
.1.3.6.1.4.1.164.8.2.1.1.1.34 |
||||||||||||||||||||||||||
|
pktSwchProfileOptionsS
This entry defines several options to control the profile. The value is a sum of values
(powers of two), where each value in the sum represents an option . The values that may be included in the sum and their meanings … |
Integer32r/w Constraints: range: 0-20 |
.1.3.6.1.4.1.164.8.2.1.1.1.35 |
||||||||||||||||||||||||||
|
pktSwchProfileClrTimerS
This entry specifies the number of minutes after which a call is cleared.
If the parameter value is 0, there is no disconnection timer. |
Integer32r/w Constraints: range: 0-20 |
.1.3.6.1.4.1.164.8.2.1.1.1.36 |
||||||||||||||||||||||||||
|
pktSwchProfileSubAddInCUDS
This entry defines the number of digits for the subaddress in CUD.
|
Integer32r/w Constraints: range: 0-20 |
.1.3.6.1.4.1.164.8.2.1.1.1.37 |
||||||||||||||||||||||||||
|
pktSwchProfileStatusS
The status of this profile. The choices are those defined in the SNMPv2 Textual Conventions
for RowStatus. This will allow easy replacement of the INTEGER syntax with the RowStatus textual convention SYNTAX. |
Enumerationr/w | .1.3.6.1.4.1.164.8.2.1.1.1.38 |
||||||||||||||||||||||||||
|
pktSwchProfileIncomingMsgS
This object enables the asynchronous user to change the 'com' message for
Incoming calls to a string of up to 20 characters. If user selects the value xxx for this object, the PAD will convert it to the relevant X.25 a… |
OctetStringr/w | .1.3.6.1.4.1.164.8.2.1.1.1.39 |
||||||||||||||||||||||||||
|
pktSwchProfileOutgoingMsgS
This object enables the asynchronous user to change the 'com' message for
Outgoing calls to a string of up to 20 characters. If user selects the value xxx for this object, the PAD will convert it to the relevant X.25 a… |
OctetStringr/w | .1.3.6.1.4.1.164.8.2.1.1.1.40 |
||||||||||||||||||||||||||
|
pktSwchProfileClearMsgS
This object enables the user to edit a message, which will appear when
the channel is cleared. The message is a string of up to 20 characters. Example of such a string: 'Call Cleared'. |
OctetStringr/w Constraints: range: 1-1224 |
.1.3.6.1.4.1.164.8.2.1.1.1.41 |
pktSwchProfileATable
table.1.3.6.1.4.1.164.8.2.1.2
·
1 row entry
·
40 columns
The Profile Table defines the profiles that the PS can use to configure a channel.
Defines the contents of each line in the Profile Table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchProfileNumberA
The number by which a profile is identified. This is also used as the index for the profile table.
The maximum profile number is 200. |
Integer32 Constraints: range: 0-200 |
.1.3.6.1.4.1.164.8.2.1.2.1.1 |
||||||||
|
pktSwchProfileRecallCharA
The character specified by this entry is used to escape from the data transfer
mode and enter the PAD command mode. The integer values have the following meanings: (0) PAD recall is not possible (1)… |
Integer32 Constraints: range: 0-200 |
.1.3.6.1.4.1.164.8.2.1.2.1.2 |
||||||||
|
pktSwchProfileEchoA
This determines if an echo of the input characters is retured to the DTE.
The options are either 'echo enabled' or 'no echo'. |
Enumeration Constraints: range: 0-200 |
.1.3.6.1.4.1.164.8.2.1.2.1.3 |
||||||||
|
pktSwchProfileDataForwCharA
The value is a sum of values (powers of two), where each value in the sum represents
a character (or characters) that is (are) used as a data forwarding character. The data forwarding characters are used to instruct th… |
Integer32 Constraints: range: 0-200 |
.1.3.6.1.4.1.164.8.2.1.2.1.4 |
||||||||
|
pktSwchProfileIdleTimerA
Packets will be forwarded when the idle timer expires. The idle time interval is specified
as a multiple of 50 milliseconds. The multiple is given by the parameter value. For example, a value of 60 sets an interval o… |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.164.8.2.1.2.1.5 |
||||||||
|
pktSwchProfileDevFlowContA
This parameter determines whether or not the PAD uses software flow control for the
attached device. The options are either (1) PAD uses flow control during data transfer mode, (2) PAD uses flow control both in the da… |
Enumeration Constraints: range: 0-255 |
.1.3.6.1.4.1.164.8.2.1.2.1.6 |
||||||||
|
pktSwchProfileServSigA
This parameter is used to instruct the PAD whether to transfer PAD service signals and
the PAD prompt to the local DTE in standard format. The options are (1) PAD service signals are transmitted to the DTE using the st… |
Enumeration Constraints: range: 0-200 |
.1.3.6.1.4.1.164.8.2.1.2.1.7 |
||||||||
|
pktSwchProfileBreakA
The value is a sum of values (powers of two), where each value in the sum represents
a PAD operation on receipt of the break signal from the DTE. The values that may be included in the sum and their meanings are: 0 No… |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.164.8.2.1.2.1.8 |
||||||||
|
pktSwchProfileDiscOutA
This parameter instructs the PAD whether to forward the user sequences included in
data packets to the local DTE or discard them. The options are (1) discard output or (2) normal data delivery. If the value of radSPS… |
Enumeration Constraints: range: 0-255 |
.1.3.6.1.4.1.164.8.2.1.2.1.9 |
||||||||
|
pktSwchProfileCRPaddingA
This parameter specifies the number of padding characters to be added after a carriage
return character is transmitted to the local DTE. |
Integer32 Constraints: range: 1-200 |
.1.3.6.1.4.1.164.8.2.1.2.1.10 |
||||||||
|
pktSwchProfileLineFoldA
This parameter specifies the maximum number of characters to be inserted before the
format effector. If the value is zero, there is no insertion of a format effector (line folding). |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.164.8.2.1.2.1.11 |
||||||||
|
pktSwchProfileSpeedA
This parameter determines the rate of data transmission to and from the DTE.
|
Enumeration Constraints: range: 0-255 |
.1.3.6.1.4.1.164.8.2.1.2.1.12 |
||||||||
|
pktSwchProfilePadFlowContA
This determines whether or not the terminal can exercise flow control over the PAD.
The options are either 'device can exercise flow control' or 'device cannot exercise flow control. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.8.2.1.2.1.13 |
||||||||
|
pktSwchProfileLineFeedInsertA
This parameter indicates when there is a line feed insertion after CR. The options are
(1) Insert line feed after transmission of CR to the DTE, (2) Insert line feed after receipt of CR from the DTE, (4) Insert line fe… |
Enumeration | .1.3.6.1.4.1.164.8.2.1.2.1.14 |
||||||||
|
pktSwchProfileLineFeedPadA
This parameter specifies the number of padding characters to be added after a line
feed. |
Integer32 | .1.3.6.1.4.1.164.8.2.1.2.1.15 |
||||||||
|
pktSwchProfileEditingA
This parameter specifies the editing capabilities available in the data transfer mode.
Editing is always possible when the PAD is in the command mode. The options are (1) Command editing in the data trasfer mode is en… |
Enumeration Constraints: range: 0-16383 |
.1.3.6.1.4.1.164.8.2.1.2.1.16 |
||||||||
|
pktSwchProfileCharDelA
This parameter specifies the character delete, which is one character from IA5. The default
selection is 127 (character DEL). |
Integer32 | .1.3.6.1.4.1.164.8.2.1.2.1.17 |
||||||||
|
pktSwchProfileLineDelA
This parameter specifies the line delete, which is one character from IA5. The default
selection is 24 (character CAN). |
Integer32 | .1.3.6.1.4.1.164.8.2.1.2.1.18 |
||||||||
|
pktSwchProfileLineDispA
This entry specifies the line display character, which is one character
from IA5. The default selection is 18 (character DC2). |
Integer32 | .1.3.6.1.4.1.164.8.2.1.2.1.19 |
||||||||
|
pktSwchProfileEditServSigA
This entry specifies the editing PAD service signals.
The integer values have the following meanings: (0) No editing PAD service signals (1) Editing PAD service signals for printing t… |
Integer32 Constraints: range: 1-288 |
.1.3.6.1.4.1.164.8.2.1.2.1.20 |
||||||||
|
pktSwchProfileEchomaskA
The value is a sum of values (powers of two), where each value in the sum represents
a character (or characters) that is (are) included in the echo mask. The characters in the echo mask are not echoed to the DTE when P… |
Integer32 | .1.3.6.1.4.1.164.8.2.1.2.1.21 |
||||||||
|
pktSwchProfileParTreatA
This entry controls the generation of parity bits in the data sent to the local DTE and the
checking of the parity bit when generated by the local DTE. The options are (1) parity checking is enabled, (2) parity generat… |
Enumeration | .1.3.6.1.4.1.164.8.2.1.2.1.22 |
||||||||
|
pktSwchProfilePageWaitA
This entry specifies the number of line feed characters counted by the PAD before the
page wait condition is entered. If the value is zero, page wait is disabled. |
Integer32 | .1.3.6.1.4.1.164.8.2.1.2.1.23 |
||||||||
|
pktSwchProfileBitsPerCharA
The number of data bits per character supported by the PAD.
|
Integer32 | .1.3.6.1.4.1.164.8.2.1.2.1.24 |
||||||||
|
pktSwchProfileDvParityA
This entry selects the type of parity to be checked and or generated by the PAD
when radSPSProfileParTreat is a value other than 255. The options are (1) space parity, (2) mark parity, (3) even parity, (4) odd parity,… |
Enumeration | .1.3.6.1.4.1.164.8.2.1.2.1.25 |
||||||||
|
pktSwchProfileStopBitsA
This entry indicates the number of stop bits per character supported by the PAD.
The options are either (1) one stop bit, (2) two stop bits, or (3) 1.5 stop bits. |
Enumeration | .1.3.6.1.4.1.164.8.2.1.2.1.26 |
||||||||
|
pktSwchProfileSpecFlowA
This entry is used to define additional flow control possiblilites.
The options are either (1) Flow control by means fo the terminal DTR line or (2) No special flow control. |
Enumeration | .1.3.6.1.4.1.164.8.2.1.2.1.27 |
||||||||
|
pktSwchProfileCountFwdA
This entry can be used to instruct the PAD to complete the assembly of a packet
and to forward it after the specifed number of characters has been received. If the value is zero, count forwarding is disabled. |
Integer32 | .1.3.6.1.4.1.164.8.2.1.2.1.28 |
||||||||
|
pktSwchProfileEscDelayA
This entry can be used to instruct the PAD whether to delay the forwarding of
a data packet when an escape character is detected in the data stream and to determine the required delay. The packet forwarding is delayed … |
Integer32 | .1.3.6.1.4.1.164.8.2.1.2.1.29 |
||||||||
|
pktSwchProfileCharBreakA
This entry specifies the decimal value of the character that will be interpreted
as an additional break signal by the PAD. A value of zero indicates no break character. |
Integer32 | .1.3.6.1.4.1.164.8.2.1.2.1.30 |
||||||||
|
pktSwchProfileCharSuppressA
This entry specifies the decimal value of the character that will toggle
echo suppression in the PAD. A value of zero indicates that echo suppression is only controlled by radSPSProfileEcho. |
Integer32 | .1.3.6.1.4.1.164.8.2.1.2.1.31 |
||||||||
|
pktSwchProfileCharSubsA
This entry specifies the decimal value of the character that will be echoed
instead of the character received from the user's DTE. A zero value indicates that no character is echoed. |
Integer32 | .1.3.6.1.4.1.164.8.2.1.2.1.32 |
||||||||
|
pktSwchProfileFormFeedPadA
This entry specifies the number of padding (NUL) characters that will be
automatically sent after the form feed character. |
Integer32 | .1.3.6.1.4.1.164.8.2.1.2.1.33 |
||||||||
|
pktSwchProfileInactivityA
This entry specifies the number of minutes after which the PAD will forward
the accumulated data and clear the call. A zero value indicates no disconnection on inactivity. |
Integer32 | .1.3.6.1.4.1.164.8.2.1.2.1.34 |
||||||||
|
pktSwchProfileOptionsA
This entry defines several options to control the profile. The value is a sum of values
(powers of two), where each value in the sum represents an option . The values that may be included in the sum and their meaning… |
Integer32 | .1.3.6.1.4.1.164.8.2.1.2.1.35 |
||||||||
|
pktSwchProfileClrTimerA
This entry specifies the number of minutes after which a call is cleared.
If the parameter value is 0, there is no disconnection timer. |
Integer32 | .1.3.6.1.4.1.164.8.2.1.2.1.36 |
||||||||
|
pktSwchProfileSubAddInCUDA
This entry defines the number of digits for the subaddress in CUD.
|
Integer32 Constraints: range: 1-200 |
.1.3.6.1.4.1.164.8.2.1.2.1.37 |
||||||||
|
pktSwchProfileIncomingMsgA
This object is used by an asynchronous user to change the 'com' message for
Incoming calls to a string of up to 20 characters. If user selects the value xxx for this object, the PAD will convert it to the relevant X.25… |
OctetString | .1.3.6.1.4.1.164.8.2.1.2.1.38 |
||||||||
|
pktSwchProfileOutgoingMsgA
This object is used by an asynchronous user to change the 'com' message for
Outgoing calls to a string of up to 20 characters. If user selects the value xxx for this object, the PAD will convert it to the relevant X.25… |
OctetString | .1.3.6.1.4.1.164.8.2.1.2.1.39 |
||||||||
|
pktSwchProfileClearMsgA
This object is the message selected by user, which will appear when
the channel is cleared. The message is a string of up to 20 characters. Example of such a string: 'Call Cleared'. |
OctetString Enumerated Values:
|
.1.3.6.1.4.1.164.8.2.1.2.1.40 |
pktSwchChannelSTable
table.1.3.6.1.4.1.164.8.2.2.1
·
1 row entry
·
20 columns
The Scratch Channel Table defines the channels configured on the PS.
Defines the contents of each line in the Scratch Channel Table.
Indexes
pktSwchCallIdNumberA
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchChannelIfIndexS
This is used as the index for the channel table.
|
SNMPv2-SMIInteger32 Constraints: range: 1-200Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.2.2.1.1.1 |
||||||||
|
pktSwchChannelNumberS
The number by which a channel is identified.
|
Integer32 | .1.3.6.1.4.1.164.8.2.2.1.1.2 |
||||||||
|
pktSwchChannelProfileS
The profile that the channel uses for command mode operations.
|
Integer32r/w | .1.3.6.1.4.1.164.8.2.2.1.1.3 |
||||||||
|
pktSwchChannelOutCallProfileS
The number of the profile that will be used during an outgoing
call on the channel. |
Integer32r/w | .1.3.6.1.4.1.164.8.2.2.1.1.4 |
||||||||
|
pktSwchChannelInCallProfileS
The number of the profile that will be used during an incoming
call on the channel. |
Integer32r/w | .1.3.6.1.4.1.164.8.2.2.1.1.5 |
||||||||
|
pktSwchChannelRemoteProfileS
The number of the profile that will be downloaded to the remote
PAD at the beginning of a new call. |
Integer32r/w Constraints: range: 1-200 |
.1.3.6.1.4.1.164.8.2.2.1.1.6 |
||||||||
|
pktSwchChannelAutocallIdS
Selects the mnemonic (call ID) to be used as the first alternative.
A value of zero indicates that the autocall function is disabled. |
Integer32r/w Constraints: range: 0-64 |
.1.3.6.1.4.1.164.8.2.2.1.1.7 |
||||||||
|
pktSwchChannelAlterAutocallIdS
Selects the alternate mnemonic for the autocall function. A value of zero indicates that the
alternate destination is not used. |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.2.2.1.1.8 |
||||||||
|
pktSwchChannelAutocallRetriesS
The number of autocall retries if the autocall setup request is
rejected with a busy cause. |
Integer32r/w | .1.3.6.1.4.1.164.8.2.2.1.1.9 |
||||||||
|
pktSwchChannelAutocallIntervalS
The interval in seconds between consecutive autocall retries.
|
Integer32r/w | .1.3.6.1.4.1.164.8.2.2.1.1.10 |
||||||||
|
pktSwchChannelCallAliasS
The alias to be sent after the call is set up. A value of zero
indicates that alias sending is disabled. The aliases are configured on the Alias Table. |
Integer32r/w Constraints: range: 1-200 |
.1.3.6.1.4.1.164.8.2.2.1.1.11 |
||||||||
|
pktSwchChannelSubAddress1S
The first subaddress for the channel.
|
Integer32r/w Constraints: range: 0-64 |
.1.3.6.1.4.1.164.8.2.2.1.1.12 |
||||||||
|
pktSwchChannelSubAddress2S
The second subaddress for the channel.
|
Integer32r/w | .1.3.6.1.4.1.164.8.2.2.1.1.13 |
||||||||
|
pktSwchChannelNUISEntry
The number corresponding to the NUI information to be sent.
This number is the same as the pktSwchNuiGroupId. |
Integer32r/w | .1.3.6.1.4.1.164.8.2.2.1.1.14 |
||||||||
|
pktSwchChannelClearTimerS
Time limitation for an open session. A value of zero indicates that
the Clear timer is not used. |
Integer32r/w | .1.3.6.1.4.1.164.8.2.2.1.1.15 |
||||||||
|
pktSwchChannelOptionsS
This controls the use of gneral non-correlated channel options.
The value is a sum of values (powers of two), where each value in the sum represents an option. The values that may be included in the sum and their meanin… |
Integer32r/w | .1.3.6.1.4.1.164.8.2.2.1.1.16 |
||||||||
|
pktSwchChannelClear
The Clearing Channel operation disconnects all sessions
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.2.2.1.1.17 |
||||||||
|
pktSwchChannelCopyTo
The destination channel number, to which the Copy
is performed. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.2.2.1.1.18 |
||||||||
|
pktSwchChannelCopyToWMask
The destination channel number, to which the Copy with Mask
is performed. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.2.2.1.1.19 |
||||||||
|
pktSwchChannelCopyMask
The selected configuration parameters to be copied from the source
channel to the target channels. The value is a sum of values (powers of two), where each value in the sum represents a selected parameter that is not co… |
Integer32r/w | .1.3.6.1.4.1.164.8.2.2.1.1.20 |
pktSwchChannelATable
table.1.3.6.1.4.1.164.8.2.2.2
·
1 row entry
·
16 columns
The Active Channel Table defines the channels configured on the PS.
Defines the contents of each line in the Active Channel
Table.
Table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchChannelIfIndexA
This is used as the index for the channel table.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.2.2.2.1.1 |
||||||||
|
pktSwchChannelNumberA
The number by which a channel is identified.
|
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.8.2.2.2.1.2 |
||||||||
|
pktSwchChannelProfileA
The profile that the channel uses for command mode operations.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.2.2.2.1.3 |
||||||||
|
pktSwchChannelOutCallProfileA
The number of the profile that is used during an outgoing call on the channel.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.2.2.2.1.4 |
||||||||
|
pktSwchChannelInCallProfileA
The number of the profile that is used during an incoming call on the channel.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.2.2.2.1.5 |
||||||||
|
pktSwchChannelRemoteProfileA
The number of the profile that is downloaded to the remote PAD at the beginning of
a new call. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.2.2.2.1.6 |
||||||||
|
pktSwchChannelAutocallIdA
Selects the mnemonic (call ID) to be used as the first alternative. A value of zero indicates that
the autocall function is disabled. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.2.2.2.1.7 |
||||||||
|
pktSwchChannelAlterAutocallIdA
Selects the alternate mnemonic for the autocall function. A value of zero indicates that the
alternate destination is not used. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.2.2.2.1.8 |
||||||||
|
pktSwchChannelAutocallRetriesA
The number of autocall retrues if the autocall setup request is rejected with a busy cause.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.2.2.2.1.9 |
||||||||
|
pktSwchChannelAutocallIntervalA
The interval in seconds between consecutive autocall retries.
|
SNMPv2-SMIInteger32 Constraints: range: 0-126Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.2.2.2.1.10 |
||||||||
|
pktSwchChannelCallAliasA
The alias to be sent after the call is set up. A value of zero indicates that alias
sending is disabled. The aliases are configured on the Alias Table. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.2.2.2.1.11 |
||||||||
|
pktSwchChannelSubAddress1A
The first subaddress for the channel.
|
SNMPv2-SMIInteger32 Constraints: range: 0-127Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.2.2.2.1.12 |
||||||||
|
pktSwchChannelSubAddress2A
The second subaddress for the channel.
|
SNMPv2-SMIInteger32 Constraints: range: 0-255Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.2.2.2.1.13 |
||||||||
|
pktSwchChannelNUIAEntry
The number corresponding to the NUI information to be sent. This number is the same as the
pktSwchNuiIndex. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.2.2.2.1.14 |
||||||||
|
pktSwchChannelClearTimerA
Time limitation for an open session. A value of zero indicates that the Clear timer is not used.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.2.2.2.1.15 |
||||||||
|
pktSwchChannelOptionsA
This controls the use of general non-correlated channel options. The value is a sum of values
(powers of two), where each value in the sum represents an option. The values that may be included in the sum and their mean… |
SNMPv2-SMIInteger32 Constraints: range: 0-31Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.2.2.2.1.16 |
pktSwchCallIdSTable
table.1.3.6.1.4.1.164.8.2.3.1
·
1 row entry
·
4 columns
The Call ID Table S defines the Scratch Call IDs configured on the device.
Defines the contents of each line in the Scratch CallId Table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchCallIdNumberS
The index of this entry.
|
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.164.8.2.3.1.1.1 |
||||||||||||||||||||||||||
|
pktSwchCallIdMnemonicS
The mnemonic for this call ID.
|
SNMPv2-TCDisplayStringr/w Enumerated Values:
Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.2.3.1.1.2 |
||||||||||||||||||||||||||
|
pktSwchCallIdAddressS
The address for this call ID.
|
SNMPv2-TCDisplayStringr/w Enumerated Values:
Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.2.3.1.1.3 |
||||||||||||||||||||||||||
|
pktSwchCallIdStatusS
The status of this Call ID table entry. The choices are those defined in the SNMPv2 Textual
Conventions for RowStatus. This will allow easy replacement of the INTEGER syntax with the RowStatus textual convention SYNTA… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.2.3.1.1.4 |
pktSwchCallIdATable
table.1.3.6.1.4.1.164.8.2.3.2
·
1 row entry
·
3 columns
The Call ID Table A defines the Active Call IDs configured on the device.
Defines the contents of each line in the Active CallId Table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
pktSwchCallIdNumberA
The index of this entry.
|
Integer32 Constraints: range: 0-127 |
.1.3.6.1.4.1.164.8.2.3.2.1.1 |
|
pktSwchCallIdMnemonicA
The mnemonic for this call ID.
|
SNMPv2-TCDisplayString Constraints: range: 0-127Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.2.3.2.1.2 |
|
pktSwchCallIdAddressA
The address for this call ID.
|
SNMPv2-TCDisplayString Constraints: range: 0-127Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.2.3.2.1.3 |
pktSwchAliasSTable
table.1.3.6.1.4.1.164.8.2.4.1
·
1 row entry
·
3 columns
The Alias Table defines the aliases configured on the device.
Defines the contents of each line in the Alias Table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchAliasNumberS
The index of this entry.
|
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.8.2.4.1.1.1 |
||||||||
|
pktSwchAliasValueS
The alias is defined using up to 64 characters.
|
OctetStringr/w Constraints: range: 0-255 |
.1.3.6.1.4.1.164.8.2.4.1.1.2 |
||||||||
|
pktSwchAliasStatusS
The status of this Alias table entry. The choices are those defined in the SNMPv2 Textual
Conventions for RowStatus. This will allow easy replacement of the INTEGER syntax with the RowStatus textual convention SYNTAX. |
Enumerationr/w | .1.3.6.1.4.1.164.8.2.4.1.1.3 |
pktSwchAliasATable
table.1.3.6.1.4.1.164.8.2.4.2
·
1 row entry
·
2 columns
The Alias Table defines the aliases configured on the device.
Defines the contents of each line in the Alias Table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchAliasNumberA
The index of this entry.
|
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.8.2.4.2.1.1 |
||||||||||||||||||||||||||||||
|
pktSwchAliasValueA
The alias is defined using up to 64 characters.
|
OctetString Enumerated Values:
|
.1.3.6.1.4.1.164.8.2.4.2.1.2 |
pktSwchAsyncStatTable
table.1.3.6.1.4.1.164.8.2.5
·
1 row entry
·
13 columns
The AsyncStat Table includes status information and statistics provided by the PS on the async channels.
Defines the contents of each line in the Async Stat Table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchAsyncIfIndex
An index for the table.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.2.5.1.1 |
||||||||||||||||||||||||||||||||||||
|
pktSwchAsyncChannelNumber
The channel to which this entry applies. This value is the
same as the pktSwchChannelNumber. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.2.5.1.2 |
||||||||||||||||||||||||||||||||||||
|
pktSwchAsyncConnectionStatus
The connection status of the channel is either FREE or ENG (engaged).
|
Enumeration | .1.3.6.1.4.1.164.8.2.5.1.3 |
||||||||||||||||||||||||||||||||||||
|
pktSwchAsyncNumLogChannels
The number of active logical channels used by the asynchronous channel.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.2.5.1.4 |
||||||||||||||||||||||||||||||||||||
|
pktSwchAsyncNumActSessions
The number of active sessions opened by this asynchronous channel.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.2.5.1.5 |
||||||||||||||||||||||||||||||||||||
|
pktSwchAsyncAutocallId
Indicates whether the channel has been configured to use the autocall function and
what is the call ID. NONE means that the channel is not configured for autocall. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.2.5.1.6 |
||||||||||||||||||||||||||||||||||||
|
pktSwchAsyncRTSStatus
Shows the status of the RTS line of the asynchronous channel.
OFF indicates that the RTS line is not active, ON indicates that it is active, and UNUSED indicates that the channel PAD is programmed to disregard the state… |
Enumeration | .1.3.6.1.4.1.164.8.2.5.1.7 |
||||||||||||||||||||||||||||||||||||
|
pktSwchAsyncBuffToNet
The number of data buffers currently used by the transmit direction of the channel.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.2.5.1.8 |
||||||||||||||||||||||||||||||||||||
|
pktSwchAsyncBuffToUser
The number of data buffers currently used by the receive direction of the channel.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.2.5.1.9 |
||||||||||||||||||||||||||||||||||||
|
pktSwchAsyncTxXoff
The current state of software flow control in the transmit direction.
NO indicates that traffic flow is enabled. YES indicates that traffic flow from the user's DTE to the device channel has been interrupted by sending… |
Enumeration | .1.3.6.1.4.1.164.8.2.5.1.10 |
||||||||||||||||||||||||||||||||||||
|
pktSwchAsyncRxXoff
The current state of software flow control in the receive direction.
NO indicates that traffic flow is enabled. YES indicates that traffic flow to the user's DTE from the device channel has been interrupted by means of… |
Enumeration | .1.3.6.1.4.1.164.8.2.5.1.11 |
||||||||||||||||||||||||||||||||||||
|
pktSwchAsyncBuffOutstand
Indicates the number of buffers which were sent to the async user
but weren't yet freed. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.2.5.1.12 |
||||||||||||||||||||||||||||||||||||
|
pktSwchAsyncChannelMode
The channel mode is either X28 COMMAND or DATA TRANSFER.
|
Enumeration Constraints: range: 0-2048 |
.1.3.6.1.4.1.164.8.2.5.1.13 |
pktSwchAsyncRunProTable
table.1.3.6.1.4.1.164.8.2.6
·
1 row entry
·
24 columns
The AsyncRunPro Table includes status information and statistics provided by the PS on the async channels.
Defines the contents of each line in the Async RunPro Table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchAsyncRunProIfIndex
An index for the table.
|
SNMPv2-SMIInteger32 Constraints: range: 1-128Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.2.6.1.1 |
||||||||||||||||||||||||||||||||||||
|
pktSwchAsyncRunProChannelNumber
The channel to which this entry applies. This value is the same as the pktSwchChannelNumber.
|
SNMPv2-SMIInteger32 Constraints: range: 0-255Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.2.6.1.2 |
||||||||||||||||||||||||||||||||||||
|
pktSwchAsyncRunProRecallChar
The character specified by this entry is used to escape from the data transfer
mode and enter the PAD command mode. The integer values have the following meanings: (0) PAD recall is not possible (1)… |
Integer32 | .1.3.6.1.4.1.164.8.2.6.1.3 |
||||||||||||||||||||||||||||||||||||
|
pktSwchAsyncRunProEcho
This determines if an echo of the input characters is retured to the DTE.
The options are either 'echo enabled' or 'no echo'. |
Enumeration | .1.3.6.1.4.1.164.8.2.6.1.4 |
||||||||||||||||||||||||||||||||||||
|
pktSwchAsyncRunProDataForwChar
The value is a sum of values (powers of two), where each value in the sum represents
a character (or characters) that is (are) used as a data forwarding character. The data forwarding characters are used to instruct th… |
Integer32 | .1.3.6.1.4.1.164.8.2.6.1.5 |
||||||||||||||||||||||||||||||||||||
|
pktSwchAsyncRunProIdleTimer
Packets will be forwarded when the idle timer expires. The idle time interval is specified
as a multiple of 50 milliseconds. The multiple is given by the parameter value. For example, a value of 60 sets an interval o… |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.8.2.6.1.6 |
||||||||||||||||||||||||||||||||||||
|
pktSwchAsyncRunProDevFlowCont
This parameter determines whether or not the PAD uses software flow control for the
attached device. The options are either (1) PAD uses flow control during data transfer mode, (2) PAD uses flow control both in the da… |
Enumeration Constraints: range: 0-2048 |
.1.3.6.1.4.1.164.8.2.6.1.7 |
||||||||||||||||||||||||||||||||||||
|
pktSwchAsyncRunProServSig
This parameter is used to instruct the PAD whether to transfer PAD service signals and
the PAD prompt to the local DTE in standard format. The options are (1) PAD service signals are transmitted to the DTE using the st… |
Enumeration Constraints: range: 1-4096 |
.1.3.6.1.4.1.164.8.2.6.1.8 |
||||||||||||||||||||||||||||||||||||
|
pktSwchAsyncRunProBreak
The value is a sum of values (powers of two), where each value in the sum represents
a PAD operation on receipt of the break signal from the DTE. The values that may be included in the sum and their meanings are: 0 No… |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.8.2.6.1.9 |
||||||||||||||||||||||||||||||||||||
|
pktSwchAsyncRunProDiscOut
This parameter instructs the PAD whether to forward the user sequences included in
data packets to the local DTE or discard them. The options are (1) discard output or (2) normal data delivery. If the value of radSPS… |
Enumeration | .1.3.6.1.4.1.164.8.2.6.1.10 |
||||||||||||||||||||||||||||||||||||
|
pktSwchAsyncRunProCRPPadding
This parameter specifies the number of padding characters to be added after a carriage
return character is transmitted to the local DTE. |
Integer32 | .1.3.6.1.4.1.164.8.2.6.1.11 |
||||||||||||||||||||||||||||||||||||
|
pktSwchAsyncRunProLineFold
This parameter specifies the maximum number of characters to be inserted before the
format effector. If the value is zero, there is no insertion of a format effector (line folding). |
Integer32 | .1.3.6.1.4.1.164.8.2.6.1.12 |
||||||||||||||||||||||||||||||||||||
|
pktSwchAsyncRunProSpeed
This parameter determines the rate of data transmission to and from the DTE.
|
Enumeration | .1.3.6.1.4.1.164.8.2.6.1.13 |
||||||||||||||||||||||||||||||||||||
|
pktSwchAsyncRunProPadFlowCont
This determines whether or not the terminal can exercise flow control over the PAD.
The options are either 'device can exercise flow control' or 'device cannot exercise flow control. |
Enumeration | .1.3.6.1.4.1.164.8.2.6.1.14 |
||||||||||||||||||||||||||||||||||||
|
pktSwchAsyncRunProLineFeedInsert
This parameter indicates when there is a line feed insertion after CR. The options are
(1) Insert line feed after transmission of CR to the DTE, (2) Insert line feed after receipt of CR from the DTE, (4) Insert line fe… |
Enumeration | .1.3.6.1.4.1.164.8.2.6.1.15 |
||||||||||||||||||||||||||||||||||||
|
pktSwchAsyncRunProLineFeedPad
This parameter specifies the number of padding characters to be added after a line
feed. |
Integer32 | .1.3.6.1.4.1.164.8.2.6.1.16 |
||||||||||||||||||||||||||||||||||||
|
pktSwchAsyncRunProEditing
This parameter specifies the editing capabilities available in the data transfer mode.
Editing is always possible when the PAD is in the command mode. The options are (1) Command editing in the data trasfer mode is en… |
Enumeration | .1.3.6.1.4.1.164.8.2.6.1.17 |
||||||||||||||||||||||||||||||||||||
|
pktSwchAsyncRunProCharDel
This parameter specifies the character delete, which is one character from IA5. The default
selection is 127 (character DEL). |
Integer32 | .1.3.6.1.4.1.164.8.2.6.1.18 |
||||||||||||||||||||||||||||||||||||
|
pktSwchAsyncRunProLineDel
This parameter specifies the line delete, which is one character from IA5. The default
selection is 24 (character CAN). |
Integer32 | .1.3.6.1.4.1.164.8.2.6.1.19 |
||||||||||||||||||||||||||||||||||||
|
pktSwchAsyncRunProLineDisp
This entry specifies the line display character, which is one character
from IA5. The default selection is 18 (character DC2). |
Integer32 | .1.3.6.1.4.1.164.8.2.6.1.20 |
||||||||||||||||||||||||||||||||||||
|
pktSwchAsyncRunProEditServSig
This entry specifies the editing PAD service signals.
The integer values have the following meanings: (0) No editing PAD service signals (1) Editing PAD service signals for printing t… |
Integer32 Constraints: range: 1-128 |
.1.3.6.1.4.1.164.8.2.6.1.21 |
||||||||||||||||||||||||||||||||||||
|
pktSwchAsyncRunProEchomask
The value is a sum of values (powers of two), where each value in the sum represents
a character (or characters) that is (are) included in the echo mask. The characters in the echo mask are not echoed to the DTE when P… |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.164.8.2.6.1.22 |
||||||||||||||||||||||||||||||||||||
|
pktSwchAsyncRunProParTreat
This entry controls the generation of parity bits in the data sent to the local DTE and the
checking of the parity bit when generated by the local DTE. The options are (1) parity checking is enabled, (2) parity generat… |
Enumeration | .1.3.6.1.4.1.164.8.2.6.1.23 |
||||||||||||||||||||||||||||||||||||
|
pktSwchAsyncRunProPageWait
This entry specifies the number of line feed characters counted by the PAD before the
page wait condition is entered. If the value is zero, page wait is disabled. |
Integer32 | .1.3.6.1.4.1.164.8.2.6.1.24 |
pktSwchPhyInterfaceTable
table.1.3.6.1.4.1.164.8.3
·
1 row entry
·
13 columns
The Link Table defines the links configured on the PS.
Defines the contents of each line in the Link Table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchPhyInterfaceIfIndex
The ifIndex identified with this link.
|
SNMPv2-SMIInteger32 Constraints: range: 0-15Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.3.1.1 |
||||||||||||
|
pktSwchPhyInterfaceProtocolS
The protocol to be used on this link.
Note for PPP: PPP protocol is allowed to be applied on Sync Links (1-3) as well as Async channels (1-24). In order to eliminate ambiguity in the IP destination where … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.3.1.2 |
||||||||||||
|
pktSwchPhyInterfaceProtocolA
The protocol currently used on this link.
|
Enumeration | .1.3.6.1.4.1.164.8.3.1.3 |
||||||||||||
|
pktSwchPhyInterfaceCopyTo
The destination interface number, to which the Copy
is performed. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.3.1.4 |
||||||||||||
|
pktSwchPhyInterfaceChanged
Indicates if the current running protocol is different than the defined
protocol |
Enumeration | .1.3.6.1.4.1.164.8.3.1.5 |
||||||||||||
|
pktSwchPhyInterfaceRxBuffInPool
The free data buffers in the Rx pool per interface
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.3.1.6 |
||||||||||||
|
pktSwchPhyInterfaceConnector
The connector type of the interface
|
Enumeration | .1.3.6.1.4.1.164.8.3.1.7 |
||||||||||||
|
pktSwchPhyInterfaceNeighborIp
The Ip address of the device on the other side of the link.
|
RFC1155-SMIIpAddress Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.8.3.1.8 |
||||||||||||
|
pktSwchPhyInterfaceProtocolStatus
The status of the Interface Protocol row in the Table.
|
Enumerationr/w | .1.3.6.1.4.1.164.8.3.1.9 |
||||||||||||
|
pktSwchPhyInterfaceTestCmd
START/STOP a test on the current interface.
The available tests are: v54Local - Local Analog Loopback (AL), L3 according to ITU-T standard. v54Remote - Remote Digital Loopback(RDL), L2 according to ITU-T standard. Fo… |
Enumerationr/w Constraints: range: 0-15 |
.1.3.6.1.4.1.164.8.3.1.10 |
||||||||||||
|
pktSwchPhyInterfaceTestTransmittedFrames
No. of frames which were transmitted from this interface
during the TEST. |
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.3.1.11 |
||||||||||||
|
pktSwchPhyInterfaceTestReceivedFrames
No. of frames which were received on this interface
during the TEST. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.3.1.12 |
||||||||||||
|
pktSwchPhyInterfaceTestLostFrames
Percentage of the frames which were lost during the TEST.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.3.1.13 |
pktSwchLapbSTable
table.1.3.6.1.4.1.164.8.4.1.1
·
1 row entry
·
7 columns
The Lapb Table includes statistics and configurable objects provided by the PS that are not included in RFC 1381.
Defines the contents of each line in the RAD Lapb Table.
Indexes
pktSwchCugLinkNumberS pktSwchCugIndexS
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchLapbLinkNumberS
The link number with which this entry is associated. This value
corresponds to pktSwchPhyInterfaceNumber. There is an entry for each link for which the pktSwchPhyInterfaceProtocol is X.25 and one entry for each link … |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.4.1.1.1.1 |
||||||||
|
pktSwchLapbInternalClockS
The internal clock speed to be used on this LAPB link. If external clock is used, the value is
255. |
Enumerationr/w | .1.3.6.1.4.1.164.8.4.1.1.1.2 |
||||||||
|
pktSwchLapbLineOptionS
The line option to be used on this link. A value of zero indicates
no options. A value between 0 and 255 inclusive specifes a time in minutes after which the line will be disconnected if no session is open. The follow… |
Integer32r/w | .1.3.6.1.4.1.164.8.4.1.1.1.3 |
||||||||
|
pktSwchLapbSegmentSizeS
This value is for the use of billing information. The value can be no larger than the maximum
packet size. |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.4.1.1.1.4 |
||||||||
|
pktSwchLapbXIDS
When this parameter is different than zero, this lapb is configured
as a V25 bis dialed link. This is the XID entry Index which this dialed link is associated with. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.4.1.1.1.5 |
||||||||
|
pktSwchLapbAckCounterS
This object defines how many frames will be received on the link
before the PS will send Acknowledge (RR frame). It is used for Piggy Back Acknowledge (ack within the info frames) and saves traffic on the line. Default … |
Integer32r/w | .1.3.6.1.4.1.164.8.4.1.1.1.6 |
||||||||
|
pktSwchLapbAckTimerS
The Ack Timer defines the maximum time in seconds that the device
will wait before sending RR acknowledgment on the received frames. It is used for Piggy Back Acknowledge (ack within the info frames) and saves traffic o… |
Integer32r/w | .1.3.6.1.4.1.164.8.4.1.1.1.7 |
pktSwchLapbATable
table.1.3.6.1.4.1.164.8.4.1.2
·
1 row entry
·
18 columns
The Lapb Table includes statistics and configurable objects provided by the PS that are not included in RFC 1381.
Defines the contents of each line in the RAD Lapb Table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchLapbLinkNumberA
The link number with which this entry is associated. This value corresponds to
pktSwchPhyInterfaceNumber. There is an entry for each link for which the pktSwchPhyInterfaceProtocol is X.25 and one entry for each link … |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.4.1.2.1.1 |
||||||||||||||
|
pktSwchLapbInternalClockA
The internal clock speed currently used on this LAPB link.
If external clock is used, the value is 255. |
Enumeration | .1.3.6.1.4.1.164.8.4.1.2.1.2 |
||||||||||||||
|
pktSwchLapbLineOptionA
The line option currently used on this link. A value of zero
indicates no options. A value between 1 and 255 inclusive specifes a time in minutes after which the line will be disconnected if no session is open. The f… |
Integer32 | .1.3.6.1.4.1.164.8.4.1.2.1.3 |
||||||||||||||
|
pktSwchLapbSegmentSizeA
The current value of the segment size.
|
Integer32 Constraints: range: 0-4095 |
.1.3.6.1.4.1.164.8.4.1.2.1.4 |
||||||||||||||
|
pktSwchLapbLineProtocol
This is the lower level protocol which runs under this lapb interface.
|
Enumeration Constraints: range: 0-4095 |
.1.3.6.1.4.1.164.8.4.1.2.1.5 |
||||||||||||||
|
pktSwchLapbLowerId
In case of X.25 over Frame-relay this is the lower level link
number. |
SNMPv2-SMIInteger32 Constraints: range: 0-4095Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.4.1.2.1.6 |
||||||||||||||
|
pktSwchLapbXIDA
When this parameter is different than zero, this lapb is configured
as a V25 bis dialed link. This is the XID entry which this dialed link is associated with. |
SNMPv2-SMIInteger32 Constraints: range: 0-4095Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.4.1.2.1.7 |
||||||||||||||
|
pktSwchLapbTransmittedIFrames
The transmitted I frames on this link.
|
SNMPv2-SMICounter32 Constraints: range: 0-4095Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.4.1.2.1.8 |
||||||||||||||
|
pktSwchLapbReceivedIFrames
The received I frames on this link.
|
SNMPv2-SMICounter32 Constraints: range: 0-4095Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.4.1.2.1.9 |
||||||||||||||
|
pktSwchLapbNSError
The number of I frames transmitted out of sequence.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.4.1.2.1.10 |
||||||||||||||
|
pktSwchLapbTransmittedRRFrames
The transmitted RR frames on this link.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.4.1.2.1.11 |
||||||||||||||
|
pktSwchLapbReceivedRRFrames
The received RR frames on this link.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.4.1.2.1.12 |
||||||||||||||
|
pktSwchLapbTransmittedRNRFrames
The transmitted RNR frames on this link.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.4.1.2.1.13 |
||||||||||||||
|
pktSwchLapbReceivedRNRFrames
The received RNR frames on this link.
|
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.4.1.2.1.14 |
||||||||||||||
|
pktSwchLapbTransmittedFRMRFrames
The transmitted FRMR frames on this link.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.4.1.2.1.15 |
||||||||||||||
|
pktSwchLapbReceivedFRMRFrames
The received FRMR frames on this link.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.4.1.2.1.16 |
||||||||||||||
|
pktSwchLapbAckCounterA
This object defines how many frames will be received on the link
before the PS will send Acknowledge (RR frame). It is used for Piggy Back Acknowledge (ack within the info frames) and saves traffic on the line. Default … |
Integer32 | .1.3.6.1.4.1.164.8.4.1.2.1.17 |
||||||||||||||
|
pktSwchLapbAckTimerA
The Ack Timer defines the maximum time in seconds that the device
will wait before sending RR acknowledgment on the received frames. It is used for Piggy Back Acknowledge (ack within the info frames) and saves traffic o… |
Integer32 | .1.3.6.1.4.1.164.8.4.1.2.1.18 |
pktSwchPlpSTable
table.1.3.6.1.4.1.164.8.4.2.1
·
1 row entry
·
7 columns
The Scratch Plp Table includes configurable objects provided by the PS that are not included in RFC 1382.
Defines the contents of each line in the RAD Scratch Plp Table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
pktSwchPlpLinkNumberS
The ifIndex of the X.25 interface.
|
SNMPv2-SMIInteger32 Constraints: range: 0-99Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.4.2.1.1.1 |
|
pktSwchPlpInCallOptionS
The in call options for the link. The value is a sum of values (powers of two), where each
value in the sum represents an option. The values that may be included in the sum and their meanings are: 0 No options 1 Fast … |
SNMPv2-SMIInteger32r/w Constraints: range: 0-255Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.4.2.1.1.2 |
|
pktSwchPlpOutCallOptionS
The out call options for the link. The value is a sum of values
(powers of two), where each value in the sum represents an option. The values that may be included in the sum and their meanings are: 0 No options 1 Don'… |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.164.8.4.2.1.1.3 |
|
pktSwchPlpCugSubscriptionS
The CUG subscription for the link.
|
Enumerationr/w Constraints: range: 0-255 |
.1.3.6.1.4.1.164.8.4.2.1.1.4 |
|
pktSwchPlpNUIS
This is the NUI group which this Plp is part of.
|
SNMPv2-SMIInteger32r/w Constraints: range: 0-7Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.4.2.1.1.5 |
|
pktSwchPlpCpyPktSize
x25 packet size.
|
SNMPv2-SMIInteger32r/w Constraints: range: 0-99Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.4.2.1.1.6 |
|
pktSwchPlpCpyWinSize
x25 window size.
|
SNMPv2-SMIInteger32r/w Constraints: range: 0-99Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.4.2.1.1.7 |
pktSwchPlpATable
table.1.3.6.1.4.1.164.8.4.2.2
·
1 row entry
·
6 columns
The Active Plp Table includes objects provided by the PS that are not included in RFC 1382. It also includes some packet layer statistics, some of which are defined in RFC 1382, but are not supported there, as the x25StatTable in RFC 1382 is not supported.
Defines the contents of each line in the RAD Active Plp Table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchPlpLinkNumberA
The link number with which this entry is associated. This value corresponds to
pktSwchPhyInterfaceNumber. There is an entry for each link for which the pktSwchPhyInterfaceProtocol is X.25 and one entry for each link … |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.4.2.2.1.1 |
||||||||||||||||||||||||||||||||||||
|
pktSwchPlpInCallOptionA
The current in call options for the link. The value is a sum of values (powers of two),
where each value in the sum represents an option. The values that can be included in the sum and their meanings are: 0 No options… |
SNMPv2-SMIInteger32 Constraints: range: 0-3Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.4.2.2.1.2 |
||||||||||||||||||||||||||||||||||||
|
pktSwchPlpOutCallOptionA
The out call options for the link. The value is a sum of values
(powers of two), where each value in the sum represents an option. The values that may be included in the sum and their meanings are: 0 No options 1 Don'… |
Integer32 Constraints: range: 1-200 |
.1.3.6.1.4.1.164.8.4.2.2.1.3 |
||||||||||||||||||||||||||||||||||||
|
pktSwchPlpCugSubscriptionA
The current CUG subscription for the link.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.8.4.2.2.1.4 |
||||||||||||||||||||||||||||||||||||
|
pktSwchPlpNUIA
This is the NUI group which this Plp is part of.
|
SNMPv2-SMIInteger32 Constraints: range: 0-7Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.4.2.2.1.5 |
||||||||||||||||||||||||||||||||||||
|
pktSwchStatOutRestarts
The number of remotely initiated (including
provider initiated) restarts experienced by the PLE excluding the restart associated with bringing up the PLE interface. This only counts restarts received when the PLE alrea… |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.4.2.2.1.6 |
pktSwchCugSTable
table.1.3.6.1.4.1.164.8.4.4.1
·
1 row entry
·
4 columns
The Scratch Cug Table lists the Closed User Groups defined to each X.25 link.
Defines the contents of each line in the Scratch RAD Cug Table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
pktSwchCugLinkNumberS
The link number with which this entry is associated. This value
corresponds to pktSwchPhyInterfaceNumber. There is an entry for each link for which the pktSwchPhyInterfaceProtocol is X.25 if the link has CUG options … |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.4.4.1.1.1 |
|
pktSwchCugIndexS
The index of the CUG for a specific link. The lowest indexed CUG
is the preferential CUG. |
SNMPv2-SMIInteger32 Constraints: range: 0-99Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.4.4.1.1.2 |
|
pktSwchCugNumberS
The CUG number for this entry.
|
SNMPv2-SMIInteger32r/w Constraints: range: 0-255Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.4.4.1.1.3 |
|
pktSwchCugStatus
The status of this CUG table entry. The choices are those defined in the SNMPv2 Textual
Conventions for RowStatus. This will allow easy replacement of the INTEGER syntax with the RowStatus textual convention SYNTAX. |
Enumerationr/w Constraints: range: 0-255 |
.1.3.6.1.4.1.164.8.4.4.1.1.4 |
pktSwchCugATable
table.1.3.6.1.4.1.164.8.4.4.2
·
1 row entry
·
3 columns
The Active Cug Table lists the active Closed User Groups defined to each X.25 link.
Defines the contents of each line in the Active RAD Cug Table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
pktSwchCugLinkNumberA
The link number with which this entry is associated. This value corresponds to
pktSwchPhyInterfaceNumber. There is an entry for each link for which the pktSwchPhyInterfaceProtocol is X.25 if the link has CUG options … |
SNMPv2-SMIInteger32 Constraints: range: 0-99Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.4.4.2.1.1 |
|
pktSwchCugIndexA
The index of the CUG for a specific link. The lowest indexed CUG is the preferential CUG.
|
SNMPv2-SMIInteger32 Constraints: range: 0-99Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.4.4.2.1.2 |
|
pktSwchCugNumberA
The CUG number for this entry.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.4.4.2.1.3 |
pktSwchLogChAssTable
table.1.3.6.1.4.1.164.8.4.5.1
·
1 row entry
·
7 columns
These objects contain information about the channel number configuration in an X.25 PLE. These values are the configured values. changes in these values after the interface has started may not be reflected in the operating PLE.
Entries of pktSwchLogChAssTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchLogChAssIndex
The ifIndex value for the X.25 Interface.
|
RFC1381-MIBIfIndexType Constraints: range: 0-3Textual Convention: RFC1381-MIBIfIndexType Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.164.8.4.5.1.1.1 |
||||||||||||||||||||||||||||||||||||
|
pktSwchLogChAssLIC
Lowest Incoming channel.
|
Integer32 Constraints: range: 1-200 |
.1.3.6.1.4.1.164.8.4.5.1.1.2 |
||||||||||||||||||||||||||||||||||||
|
pktSwchLogChAssHIC
Highest Incoming channel. A value of zero
indicates no channels in this range. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.8.4.5.1.1.3 |
||||||||||||||||||||||||||||||||||||
|
pktSwchLogChAssLTC
Lowest Two-way channel.
|
Integer32 Constraints: range: 0-7 |
.1.3.6.1.4.1.164.8.4.5.1.1.4 |
||||||||||||||||||||||||||||||||||||
|
pktSwchLogChAssHTC
Highest Two-way channel. A value of zero
indicates no channels in this range. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.8.4.5.1.1.5 |
||||||||||||||||||||||||||||||||||||
|
pktSwchLogChAssLOC
Lowest outgoing channel.
|
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.8.4.5.1.1.6 |
||||||||||||||||||||||||||||||||||||
|
pktSwchLogChAssHOC
Highest outgoing channel. A value of zero
indicates no channels in this range. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.8.4.5.1.1.7 |
pktSwchLogChPartnerTable
table.1.3.6.1.4.1.164.8.4.5.2
·
1 row entry
·
5 columns
These objects contain information about the partner channel number configuration in an X.25 PLE. These values are the configured values. changes in these values after the interfaces has started may not be reflected in the operating PLE.
Entries of pktSwchLogChPartnerTable.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
pktSwchLogChPartnerIfIndex
The ifIndex value for the Lapb Interface.
|
RFC1381-MIBIfIndexType Textual Convention: RFC1381-MIBIfIndexType Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.164.8.4.5.2.1.1 |
|
pktSwchLogChPartnerLcIndex
The Index value for the LCN.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.4.5.2.1.2 |
|
pktSwchLogChPartnerProtocol
The protocol of the partner.
|
Enumeration | .1.3.6.1.4.1.164.8.4.5.2.1.3 |
|
pktSwchLogChPartnerOpIfIndex
The ifIndex value for the partner Lapb Interface.
|
RFC1381-MIBIfIndexType Textual Convention: RFC1381-MIBIfIndexType Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.164.8.4.5.2.1.4 |
|
pktSwchLogChPartnerOpLcIndex
The Index value for the partner LCN.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.4.5.2.1.5 |
pktSwchHdlcSTable
table.1.3.6.1.4.1.164.8.5.1
·
1 row entry
·
16 columns
The Scratch Hdlc Table contains configuration information for HDLC links
Defines the contents of each line in the RAD Hdlc Table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchHdlcLinkNumberS
The link number with which this entry is associated. This value
corresponds to pktSwchPhyInterfaceNumber. There is an entry for each link for which the pktSwchPhyInterfaceProtocol is HDLC. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.5.1.1.1 |
||||||||||||||||||||||||||||||||||||
|
pktSwchHdlcDestAddrS
The destination address. It defines the X.25 address on the remote
device. |
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.5.1.1.2 |
||||||||||||||||||||||||||||||||||||
|
pktSwchHdlcDestSubAddrS
The destination subaddress. It defines the synchronous link subaddress
on the remote device. |
Integer32r/w | .1.3.6.1.4.1.164.8.5.1.1.3 |
||||||||||||||||||||||||||||||||||||
|
pktSwchHdlcRedialTimeoutS
The time interval in seconds between two consecutive connect
operations retries. |
Integer32r/w | .1.3.6.1.4.1.164.8.5.1.1.4 |
||||||||||||||||||||||||||||||||||||
|
pktSwchHdlcRedialRetriesS
This defines how many times the call operation is repeated if the
call request has failed. |
Integer32r/w | .1.3.6.1.4.1.164.8.5.1.1.5 |
||||||||||||||||||||||||||||||||||||
|
pktSwchHdlcInactivityS
The amount of time in minutes of inactivity that will cause the
session to disconnect. |
Integer32r/w Constraints: range: 0-12 |
.1.3.6.1.4.1.164.8.5.1.1.6 |
||||||||||||||||||||||||||||||||||||
|
pktSwchHdlcX25FacilitiesS
This specifies the X.25 facilities. The value is a sum of values
(powers of two), where each value in the sum represents an option. The values that may be included in the sum and their meanings are: 0 No options 1 Pa… |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.5.1.1.7 |
||||||||||||||||||||||||||||||||||||
|
pktSwchHdlcLocalSubaddr1S
The first local subaddress.
|
Integer32r/w Constraints: range: 0-39 |
.1.3.6.1.4.1.164.8.5.1.1.8 |
||||||||||||||||||||||||||||||||||||
|
pktSwchHdlcLocalSubaddr2S
The secondary local subaddress.
|
Integer32r/w Constraints: range: 1-40 |
.1.3.6.1.4.1.164.8.5.1.1.9 |
||||||||||||||||||||||||||||||||||||
|
pktSwchHdlcDestDlciS
The local DLCI which is used for HDLC encapsulation over Frame Relay.
Range: 16...991 |
SNMPv2-SMIInteger32r/w Constraints: range: 1-500Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.5.1.1.10 |
||||||||||||||||||||||||||||||||||||
|
pktSwchHdlcDestPortS
The local port that is used for HDLC encapsulation over Frame Relay.
Range: 1...12 |
SNMPv2-SMIInteger32r/w Constraints: range: 0-499Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.5.1.1.11 |
||||||||||||||||||||||||||||||||||||
|
pktSwchHdlcProtocolS
The HDLC protocol type.
|
Enumerationr/w Constraints: range: 1-500 |
.1.3.6.1.4.1.164.8.5.1.1.12 |
||||||||||||||||||||||||||||||||||||
|
pktSwchHdlcFlowContOptionsS
This specifies the type of flow control of the HDLC link. The value
is a sum of values (powers of two), where each value in the sum represents an option. The values that may be included in the sum and their meanings a… |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.5.1.1.13 |
||||||||||||||||||||||||||||||||||||
|
pktSwchHdlcBufferFlowControlS
The number of buffers that will be allocated for the HDLC link. Default value is 10
|
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.5.1.1.14 |
||||||||||||||||||||||||||||||||||||
|
pktSwchHdlcInternalClockS
The baud rate of the internal clock.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.5.1.1.15 |
||||||||||||||||||||||||||||||||||||
|
pktSwchHdlcNrzModeS
The data encoding format.
The value is a sum of values (powers of two), where each value in the sum represents an option. The values that may be included in the sum and their meanings are: 0 NRZ 1 NRZI 2 Tra… |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.5.1.1.16 |
pktSwchHdlcATable
table.1.3.6.1.4.1.164.8.5.2
·
1 row entry
·
23 columns
The Active Hdlc Table contains active configuration information for HDLC links
Defines the contents of each line in the RAD Hdlc Table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchHdlcLinkNumberA
The link number with which this entry is associated. This value corresponds to
pktSwchPhyInterfaceNumber. There is an entry for each link for which the pktSwchPhyInterfaceProtocol is HDLC. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.5.2.1.1 |
||||||||||||||||||||||||||||||||||||
|
pktSwchHdlcDestAddrA
The destination address. It defines the X.25 address on the remote device.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.5.2.1.2 |
||||||||||||||||||||||||||||||||||||
|
pktSwchHdlcDestSubAddrA
The destination subaddress. It defines the synchronous link subaddress on the remote
device. |
Integer32 | .1.3.6.1.4.1.164.8.5.2.1.3 |
||||||||||||||||||||||||||||||||||||
|
pktSwchHdlcRedialTimeoutA
The time interval in seconds between two consecutive connect operations retries.
|
Integer32 | .1.3.6.1.4.1.164.8.5.2.1.4 |
||||||||||||||||||||||||||||||||||||
|
pktSwchHdlcRedialRetriesA
This defines how many times the call operation is repeated if the call request has failed.
|
Integer32 Constraints: range: 0-12 |
.1.3.6.1.4.1.164.8.5.2.1.5 |
||||||||||||||||||||||||||||||||||||
|
pktSwchHdlcInactivityA
The amount of time in minutes of inactivity that will cause the
session to disconnect. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.8.5.2.1.6 |
||||||||||||||||||||||||||||||||||||
|
pktSwchHdlcX25FacilitiesA
This specifies the X.25 facilities. The value is a sum of values (powers of two), where each
value in the sum represents an option. The values that may be included in the sum and their meanings are: 0 No options 1 Pac… |
Integer32 Constraints: range: 0-39 |
.1.3.6.1.4.1.164.8.5.2.1.7 |
||||||||||||||||||||||||||||||||||||
|
pktSwchHdlcLocalSubaddr1A
The first local subaddress.
|
Integer32 Constraints: range: 1-40 |
.1.3.6.1.4.1.164.8.5.2.1.8 |
||||||||||||||||||||||||||||||||||||
|
pktSwchHdlcLocalSubaddr2A
The secondary local subaddress.
|
Integer32 Constraints: range: 1-500 |
.1.3.6.1.4.1.164.8.5.2.1.9 |
||||||||||||||||||||||||||||||||||||
|
pktSwchHdlcDestDlciA
The local DLCI which is used for HDLC encapsulation over Frame Relay.
|
SNMPv2-SMIInteger32 Constraints: range: 0-499Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.5.2.1.10 |
||||||||||||||||||||||||||||||||||||
|
pktSwchHdlcDestPortA
The local port that is used for HDCL encapsulation over Frame Relay.
|
SNMPv2-SMIInteger32 Constraints: range: 0-500Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.5.2.1.11 |
||||||||||||||||||||||||||||||||||||
|
pktSwchHdlcProtocolA
The HDLC protocol type.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.8.5.2.1.12 |
||||||||||||||||||||||||||||||||||||
|
pktSwchHdlcFlowContOptionsA
This specifies the type of flow control of the HDLC link. The value is a sum of values
(powers of two), where each value in the sum represents an option. The values that may be included in the sum and their meanings a… |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.8.5.2.1.13 |
||||||||||||||||||||||||||||||||||||
|
pktSwchHdlcBufferFlowControlA
The number of buffers that will be allocated for the HDLC link.
|
Integer32 Constraints: range: 5-30 |
.1.3.6.1.4.1.164.8.5.2.1.14 |
||||||||||||||||||||||||||||||||||||
|
pktSwchHdlcInternalClockA
The baud rate of the internal clock.
|
Enumeration Constraints: range: 1-255 |
.1.3.6.1.4.1.164.8.5.2.1.15 |
||||||||||||||||||||||||||||||||||||
|
pktSwchHdlcNrzModeA
The data encoding format.
The value is a sum of values (powers of two), where each value in the sum represents an option. The values that may be included in the sum and their meanings are: 0 NRZ 1 NRZI 2 Tra… |
Integer32 Constraints: range: 1-10 |
.1.3.6.1.4.1.164.8.5.2.1.16 |
||||||||||||||||||||||||||||||||||||
|
pktSwchHdlcConnStatus
The status of the Hdlc session.
|
Enumeration Constraints: range: 1-10 |
.1.3.6.1.4.1.164.8.5.2.1.17 |
||||||||||||||||||||||||||||||||||||
|
pktSwchHdlcSpecialStatus
The status of the Hdlc link.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.8.5.2.1.18 |
||||||||||||||||||||||||||||||||||||
|
pktSwchHdlcCtsStatus
The CTS status.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.8.5.2.1.19 |
||||||||||||||||||||||||||||||||||||
|
pktSwchHdlcRunningX25Lcn
The format of the string is ifIndex:LCN
|
SNMPv2-TCDisplayString Enumerated Values:
Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.5.2.1.20 |
||||||||||||||||||||||||||||||||||||
|
pktSwchHdlcRunningDlci
The format of the string is ifIndex:DLCI
|
SNMPv2-TCDisplayString Enumerated Values:
Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.5.2.1.21 |
||||||||||||||||||||||||||||||||||||
|
pktSwchHdlcMaxBuffToNet
The maximum number of buffers above which Flow Control is enabled
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.5.2.1.22 |
||||||||||||||||||||||||||||||||||||
|
pktSwchHdlcBuffToNet
The number of buffers waiting for transmission.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.5.2.1.23 |
pktSwchStmTable
table.1.3.6.1.4.1.164.8.7
·
1 row entry
·
5 columns
The STM table contains information for STM links
Defines the contents of each line in the RAD STM Table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
pktSwchStmLinkNumber
The link number with which this entry is associated. This value
corresponds to pktSwchPhyInterfaceNumber. There is an entry for each link whose pktSwchPhyInterfaceProtocol is STM 4, 8, 16, or 24. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.7.1.1 |
|
pktSwchStmInternalClockS
The baud rate of the internal clock.
|
Enumerationr/w | .1.3.6.1.4.1.164.8.7.1.2 |
|
pktSwchStmInternalClockA
The current baud rate of the internal clock.
|
Enumeration | .1.3.6.1.4.1.164.8.7.1.3 |
|
pktSwchStmConn
The connectivity status of the STM interface.
|
Enumeration | .1.3.6.1.4.1.164.8.7.1.4 |
|
pktSwchStmSyncLoss
The counter for sync loss.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.7.1.5 |
pktSwchFrSTable
table.1.3.6.1.4.1.164.8.8.2
·
1 row entry
·
15 columns
The Frame Relay Scratch Table includes the scratch values of configurable objects provided by the PS that are not included in RFC 1315.
Defines the contents of each line in the RAD PS Frame Relay
Scratch Table.
Scratch Table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
pktSwchFrIfIndexS
This is the ifIndex of the frame relay port.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.8.2.1.1 |
|
pktSwchFrMaintProtS
This defines what maintenance protocol is running over this port.
0 - No maintenance protocol. 1 - ANSI PVC maintenance protocol running on DLCI number 0. 2 - LMI maintenance protocol running on DLCI number 1023. 4 - IT… |
Integer32r/w | .1.3.6.1.4.1.164.8.8.2.1.2 |
|
pktSwchFrMaintModeS
This defines the mode of maintenance protocol running over this port.
|
Enumerationr/w | .1.3.6.1.4.1.164.8.8.2.1.3 |
|
pktSwchFrRxPoolRedLineS
When the number of empty receive buffers at the port reaches this
figure (of frames),the port receiver is congested. This field value should be less than the Rx pool OK field. |
Integer32r/w | .1.3.6.1.4.1.164.8.8.2.1.4 |
|
pktSwchFrRxPoolOkS
Clear the receive congestion condition when the number of empty
receive buffers at the port reaches this figure. This value (of frames) should be greater than the Rx pool red line. |
Integer32r/w | .1.3.6.1.4.1.164.8.8.2.1.5 |
|
pktSwchFrTxPoolRedLineS
When the number of frames awaiting transmission reaches this figure,
the port transmitter is congested. This field value should be greater than the Tx pool OK field. |
Integer32r/w | .1.3.6.1.4.1.164.8.8.2.1.6 |
|
pktSwchFrTxPoolOkS
Clear the transmit congestion condition when the number of frames
awaiting transmission at the port reaches this figure. This value (of frames) should be less than the Tx pool red line. |
Integer32r/w | .1.3.6.1.4.1.164.8.8.2.1.7 |
|
pktSwchFrTxCeilingS
The maximum allowable transmit pool for this port.
|
Integer32r/w | .1.3.6.1.4.1.164.8.8.2.1.8 |
|
pktSwchFrInternalClockS
The baud rate of the internal clock.
|
Enumerationr/w | .1.3.6.1.4.1.164.8.8.2.1.9 |
|
pktSwchFrNrzModeS
The data encoding format.
|
Enumerationr/w | .1.3.6.1.4.1.164.8.8.2.1.10 |
|
pktSwchFrDlciHeaderModeS
Dlci Header length for this FR port. Option 4 means that there
will be no management Dlci in the range of 1024 to 8388607. The management Dlci will be in the range of 0-15 or 991-1023. Default value: 1. |
Enumerationr/w | .1.3.6.1.4.1.164.8.8.2.1.11 |
|
pktSwchFrDcdLinkFailureS
Link Failure Detection by DCD.
If Link Failure detection by DCD is on - (3), when the DCD is down, the FR SW will detect it and change the FR link status from UP to DOWN. A trap of LINK DOWN will be sent to the NMS. Def… |
Enumerationr/w | .1.3.6.1.4.1.164.8.8.2.1.12 |
|
pktSwchFrTxIdlesS
This parameter shows whether the PS will Transmit Idles between
frames and control the RTS pin. Default: no(2). |
Enumerationr/w | .1.3.6.1.4.1.164.8.8.2.1.13 |
|
pktSwchFrOperationModeS
When H/W Control is configured, the SCC H/W will detect the change in the
DCD or CTS signals and Start or Stop transmission automatically. When S/W Control is configured the S/W will decide when to start or stop the tra… |
Enumerationr/w | .1.3.6.1.4.1.164.8.8.2.1.14 |
|
pktSwchFrPhysInterfOptionsS
This is the physical interface.
Note that the DDS physical interface H/W does not exist in the FPS-8. It is relevant for other PS devices only. For FPS-8 only the default (noOption) should be used. Default: (2). |
Enumerationr/w | .1.3.6.1.4.1.164.8.8.2.1.15 |
pktSwchFrATable
table.1.3.6.1.4.1.164.8.8.3
·
1 row entry
·
19 columns
The Frame Relay Active Table includes statistics and the active values of configurable objects provided by the PS that are not included in RFC 1315.
Defines the contents of each line in the RAD PS Frame Relay Active Table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchFrIfIndexA
This is the ifIndex of the frame relay port.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.8.3.1.1 |
||||||||||||
|
pktSwchFrMaintProtA
This defines what maintenance protocol is running over this port.
0 - No maintenance protocol. 1 - ANSI PVC maintenance protocol running on DLCI number 0. 2 - LMI maintenance protocol running on DLCI number 1023. 4 - IT… |
Integer32 | .1.3.6.1.4.1.164.8.8.3.1.2 |
||||||||||||
|
pktSwchFrMaintModeA
This defines the mode of maintenance protocol running over this port.
|
Enumeration | .1.3.6.1.4.1.164.8.8.3.1.3 |
||||||||||||
|
pktSwchFrRxPoolRedLineA
When the number of empty receive buffers at the port reaches this figure (of frames),
the port receiver is congested. This field value should be less than the Rx pool OK field. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.8.8.3.1.4 |
||||||||||||
|
pktSwchFrRxPoolOkA
Clear the receive congestion condition when the number of empty receive buffers at the port
reaches this figure. This value (of frames) should be greater than the Rx pool red line. |
Integer32 | .1.3.6.1.4.1.164.8.8.3.1.5 |
||||||||||||
|
pktSwchFrTxPoolRedLineA
When the number of frames awaiting transmission reaches this figure,
the port transmitter is congested. This field value should be greater than the Tx pool OK field. |
Integer32 | .1.3.6.1.4.1.164.8.8.3.1.6 |
||||||||||||
|
pktSwchFrTxPoolOkA
Clear the transmit congestion condition when the number of frames awaiting transmission
at the port reaches this figure. This value (of frames) should be less than the Tx pool red line. |
Integer32 Constraints: range: 0-10 |
.1.3.6.1.4.1.164.8.8.3.1.7 |
||||||||||||
|
pktSwchFrTxCeilingA
The maximum allowable transmit pool for this port.
|
Integer32 Constraints: range: 0-65000 |
.1.3.6.1.4.1.164.8.8.3.1.8 |
||||||||||||
|
pktSwchFrInternalClockA
The baud rate of the internal clock.
|
Enumeration Constraints: range: 0-65000 |
.1.3.6.1.4.1.164.8.8.3.1.9 |
||||||||||||
|
pktSwchFrNrzModeA
The data encoding format.
|
Enumeration Constraints: range: 0-10 |
.1.3.6.1.4.1.164.8.8.3.1.10 |
||||||||||||
|
pktSwchFrDlcmiPollingInterval
This is the number of seconds between succes-
sive status enquiry messages. |
Integer32 Constraints: range: 0-65000 |
.1.3.6.1.4.1.164.8.8.3.1.11 |
||||||||||||
|
pktSwchFrDlcmiFullEnquiryInterval
Number of status enquiry intervals that pass
before issuance of a full status enquiry mes- sage. |
Integer32 Constraints: range: 0-65000 |
.1.3.6.1.4.1.164.8.8.3.1.12 |
||||||||||||
|
pktSwchFrDlcmiErrorThreshold
This is the maximum number of unanswered
Status Enquiries the equipment shall accept be- fore declaring the interface down. |
Integer32 Constraints: range: 1-200 |
.1.3.6.1.4.1.164.8.8.3.1.13 |
||||||||||||
|
pktSwchFrDlcmiMonitoredEvents
This is the number of status polling intervals
over which the error threshold is counted. For example, if within 'MonitoredEvents' number of events the station receives 'ErrorThreshold' number of errors, the interf… |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.8.8.3.1.14 |
||||||||||||
|
pktSwchFrDlciHeaderModeA
Dlci Header length for this FR port. Option 4 means that there
will be no management Dlci in the range of 1024 to 8388607. The management Dlci will be in the range of 0-15 or 991-1023. Default value: 1. |
Enumeration Constraints: range: 0-8388607 |
.1.3.6.1.4.1.164.8.8.3.1.15 |
||||||||||||
|
pktSwchFrDcdLinkFailureA
Link Failure Detection by DCD.
If Link Failure detection by DCD is on - (3), when the DCD is down, the FR SW will detect it and change the FR link status from UP to DOWN. A trap of LINK DOWN will be sent to the NMS. Def… |
Enumeration Constraints: range: 1-4 |
.1.3.6.1.4.1.164.8.8.3.1.16 |
||||||||||||
|
pktSwchFrTxIdlesA
This parameter shows whether the PS will Transmit Idles between
frames and control the RTS pin. Default: no(2). |
Enumeration Constraints: range: 0-200 |
.1.3.6.1.4.1.164.8.8.3.1.17 |
||||||||||||
|
pktSwchFrOperationModeA
When H/W Control is configured, the SCC H/W will detect the change in the
DCD or CTS signals and Start or Stop transmission automatically. When S/W Control is configured the S/W will decide when to start or stop the tra… |
Enumeration | .1.3.6.1.4.1.164.8.8.3.1.18 |
||||||||||||
|
pktSwchFrPhysInterfOptionsA
This is the physical interface.
Note that the DDS physical interface H/W does not exist in the FPS-8. It is relevant for other PS devices only. For FPS-8 only the default (noOption) should be used. Default: (2). |
Enumeration | .1.3.6.1.4.1.164.8.8.3.1.19 |
pktSwchFrIfTable
table.1.3.6.1.4.1.164.8.8.4
·
1 row entry
·
24 columns
The Frame Relay Active Port Table includes statistics and configurable objects provided by the PS that are not included in RFC 1315.
Defines the contents of each line in the RAD PS Frame Relay Port Active Table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchFrIfTxBytes
The number of Tx bytes.
|
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.8.4.1.1 |
||||||||||||
|
pktSwchFrIfRxBytes
The number of Rx bytes.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.8.4.1.2 |
||||||||||||
|
pktSwchFrIfTxCongDiscards
The number of frames discarded because of Tx congestion.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.8.4.1.3 |
||||||||||||
|
pktSwchFrIfDeTxFrames
The number of DE Tx frames.
|
SNMPv2-SMICounter32 Constraints: range: 0-10Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.8.4.1.4 |
||||||||||||
|
pktSwchFrIfDeRxFrames
The number of DE Rx frames.
|
SNMPv2-SMICounter32 Constraints: range: 0-65000Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.8.4.1.5 |
||||||||||||
|
pktSwchFrIfFecnTxFrames
The number of FECN Tx frames.
|
SNMPv2-SMICounter32 Constraints: range: 0-65000Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.8.4.1.6 |
||||||||||||
|
pktSwchFrIfFecnRxFrames
The number of FECN Tx frames.
|
SNMPv2-SMICounter32 Constraints: range: 0-10Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.8.4.1.7 |
||||||||||||
|
pktSwchFrIfBecnTxFrames
The number of BECN Tx frames.
|
SNMPv2-SMICounter32 Constraints: range: 0-65000Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.8.4.1.8 |
||||||||||||
|
pktSwchFrIfBecnRxFrames
The number of BECN Tx frames.
|
SNMPv2-SMICounter32 Constraints: range: 0-65000Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.8.4.1.9 |
||||||||||||
|
pktSwchFrIfCommRateViolTxFrames
The number of Tx committed rate violations in number of frames.
|
SNMPv2-SMICounter32 Constraints: range: 1-200Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.8.4.1.10 |
||||||||||||
|
pktSwchFrIfCommRateViolRxFrames
The number of Rx committed rate violations in number of frames.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.8.4.1.11 |
||||||||||||
|
pktSwchFrIfExcessRateViolTxFrames
The number of Tx excess rate violations in number of frames.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.8.4.1.12 |
||||||||||||
|
pktSwchFrIfExcessRateViolRxFrames
The number of Rx excess rate violations in number of frames.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.8.4.1.13 |
||||||||||||
|
pktSwchFrIfBuffersInTxPool
The number of buffers waiting for transmission.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.8.4.1.14 |
||||||||||||
|
pktSwchFrIfFreeBuffersInRxPool
The number of free buffers in the Rx pool.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.8.4.1.15 |
||||||||||||
|
pktSwchFrIfLmiTxFrames
The number of LMI Tx Frames.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.8.4.1.16 |
||||||||||||
|
pktSwchFrIfLmiRxFrames
The number of LMI Rx Frames.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.8.4.1.17 |
||||||||||||
|
pktSwchFrIfAnsiTxFrames
The number of ANSI Tx Frames.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.8.4.1.18 |
||||||||||||
|
pktSwchFrIfAnsiRxFrames
The number of ANSI Rx Frames.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.8.4.1.19 |
||||||||||||
|
pktSwchFrIfCllmTxFrames
The number of CLLM Tx Frames.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.8.4.1.20 |
||||||||||||
|
pktSwchFrIfCllmRxFrames
The number of CLLM Rx Frames.
|
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.8.4.1.21 |
||||||||||||
|
pktSwchFrIfTxCongestions
The number of Tx congestions.
|
SNMPv2-SMICounter32 Constraints: range: 0-8388607Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.8.4.1.22 |
||||||||||||
|
pktSwchFrIfRxCongestions
The number of Rx congestions.
|
SNMPv2-SMICounter32 Constraints: range: 1-4Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.8.4.1.23 |
||||||||||||
|
pktSwchFrIfTotDlciNumber
The total number of DLCIs defined.
|
SNMPv2-SMIInteger32 Constraints: range: 0-200Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.8.4.1.24 |
pktSwchFrCircuitSTable
table.1.3.6.1.4.1.164.8.8.5
·
1 row entry
·
16 columns
The Frame Relay Scratch Circuit Table includes configurable objects provided by the PS that are not included in RFC 1315.
Defines the contents of each line in the RAD PS Frame Relay
Circuit Scratch Table.
Circuit Scratch Table.
Indexes
pktSwchFrFunnelIndexS
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchFrCircuitIfIndexS
This is the ifIndex of the circuit, according to RFC 1573.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.8.5.1.1 |
||||||||
|
pktSwchFrCircuitIndexS
This Index is the DLCI of the circuit.
|
SNMPv2-SMIInteger32 Constraints: range: 0-256Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.8.5.1.2 |
||||||||
|
pktSwchFrCircuitDestProtS
The protocol encapsulation, if any, on this DLCI.
The MPE protocol is a proprietary RAD protocol that enables a generic HDLC device to have multiple connections over X.25 or Frame Relay. |
Enumerationr/w Constraints: range: 0-256 |
.1.3.6.1.4.1.164.8.8.5.1.3 |
||||||||
|
pktSwchFrCircuitDestIdS
If the DLCI destination protocol is none or async, this field
has a value of an existing DLCI or async channel, respectively. Otherwise, a value of zero is used. |
SNMPv2-TCDisplayStringr/w Constraints: range: 0-65000Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.8.5.1.4 |
||||||||
|
pktSwchFrCircuitBackIdS
The backup DLCI which is used when the current DLCI goes inactive.
The destination protocol and destination id are the same as in the current DLCI |
SNMPv2-TCDisplayStringr/w Constraints: range: 0-65000Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.8.5.1.5 |
||||||||
|
pktSwchFrCircuitTxCirIntervalS
The Tx CIR interval in 1/10 seconds.
|
Integer32r/w Constraints: range: 0-10 |
.1.3.6.1.4.1.164.8.8.5.1.6 |
||||||||
|
pktSwchFrCircuitTxCommittedS
The Tx committed rate in bytes per interval.
|
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.8.5.1.7 |
||||||||
|
pktSwchFrCircuitTxExcessS
The Tx excess in bytes per interval.
|
Integer32r/w | .1.3.6.1.4.1.164.8.8.5.1.8 |
||||||||
|
pktSwchFrCircuitRxCirIntervalS
The Rx CIR interval in 1/10 seconds.
|
Integer32r/w | .1.3.6.1.4.1.164.8.8.5.1.9 |
||||||||
|
pktSwchFrCircuitRxCommittedS
The Rx committed rate in bytes per interval.
|
Integer32r/w | .1.3.6.1.4.1.164.8.8.5.1.10 |
||||||||
|
pktSwchFrCircuitRxExcessS
The Rx excess in bytes per interval.
|
Integer32r/w Constraints: range: 0-256 |
.1.3.6.1.4.1.164.8.8.5.1.11 |
||||||||
|
pktSwchFrCircuitFunnelIdS
The funnel ID.
|
Integer32r/w Constraints: range: 0-256 |
.1.3.6.1.4.1.164.8.8.5.1.12 |
||||||||
|
pktSwchFrCircuitStatusS
The status of the circuit row in the Table.
|
Enumerationr/w Constraints: range: 0-65000 |
.1.3.6.1.4.1.164.8.8.5.1.13 |
||||||||
|
pktSwchFrCircuitExtendedDlciS
The no. of the DLCI represented in 23 bits.
|
Integer32 Constraints: range: 0-65000 |
.1.3.6.1.4.1.164.8.8.5.1.14 |
||||||||
|
pktSwchFrCircuitTxPriorityS
DLCI TX Priority level. The levels are defined in the
pktSwchTxPriorityTable |
Integer32r/w Constraints: range: 0-10 |
.1.3.6.1.4.1.164.8.8.5.1.15 |
||||||||
|
pktSwchFrCircuitIsdnRoutIdS
ISDN destination. ID in the ISDN routing table containing
the outgoing ISDN address for this DLCI. Default value: 0 for no ISDN routing ID. |
Integer32r/w | .1.3.6.1.4.1.164.8.8.5.1.16 |
pktSwchFrCircuitATable
table.1.3.6.1.4.1.164.8.8.6
·
1 row entry
·
26 columns
The Frame Relay Active Circuit Table includes statistics and configurable objects provided by the PS that are not included in RFC 1315.
Defines the contents of each line in the RAD PS Frame Relay Circuit Active Table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchFrCircuitIfIndexA
This is the ifIndex of the circuit, according to RFC 1573.
|
SNMPv2-SMIInteger32 Constraints: range: 0-8388607Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.8.6.1.1 |
||||||||||||||||||||||||||||||||||||
|
pktSwchFrCircuitIndexA
This Index is the DLCI of the circuit.
|
SNMPv2-SMIInteger32 Constraints: range: 0-1023Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.8.6.1.2 |
||||||||||||||||||||||||||||||||||||
|
pktSwchFrCircuitDestProtA
The protocol encapsulation, if any, on this DLCI.
The MPE protocol is a proprietary RAD protocol that enables a generic HDLC device to have multiple connections over X.25 or Frame Relay. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.8.8.6.1.3 |
||||||||||||||||||||||||||||||||||||
|
pktSwchFrCircuitDestIdA
If the DLCI destination protocol is none or async, this field
has a value of an existing DLCI or async channel, respectively. Otherwise, a value of zero is used. |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.8.6.1.4 |
||||||||||||||||||||||||||||||||||||
|
pktSwchFrCircuitBackIdA
The backup DLCI which is used when the current DLCI goes inactive.
The destination protocol and destination id are the same as in the current DLCI |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.8.6.1.5 |
||||||||||||||||||||||||||||||||||||
|
pktSwchFrCircuitTxCirIntervalA
The Tx CIR interval in 1/10 seconds.
|
Integer32 | .1.3.6.1.4.1.164.8.8.6.1.6 |
||||||||||||||||||||||||||||||||||||
|
pktSwchFrCircuitTxCommittedA
The Tx committed rate in bytes per interval.
|
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.164.8.8.6.1.7 |
||||||||||||||||||||||||||||||||||||
|
pktSwchFrCircuitTxExcessA
The Tx excess in bytes per interval.
|
Integer32 Constraints: range: 0-7 |
.1.3.6.1.4.1.164.8.8.6.1.8 |
||||||||||||||||||||||||||||||||||||
|
pktSwchFrCircuitRxCirIntervalA
The Rx CIR interval in 1/10 seconds.
|
Integer32 Constraints: range: 1-99 |
.1.3.6.1.4.1.164.8.8.6.1.9 |
||||||||||||||||||||||||||||||||||||
|
pktSwchFrCircuitRxCommittedA
The Rx committed rate in bytes per interval.
|
Integer32 Constraints: range: 1-99 |
.1.3.6.1.4.1.164.8.8.6.1.10 |
||||||||||||||||||||||||||||||||||||
|
pktSwchFrCircuitRxExcessA
The Rx excess in bytes per interval.
|
Integer32 Constraints: range: 0-200 |
.1.3.6.1.4.1.164.8.8.6.1.11 |
||||||||||||||||||||||||||||||||||||
|
pktSwchFrCircuitFunnelIdA
The funnel ID.
|
Integer32 Constraints: range: 0-3 |
.1.3.6.1.4.1.164.8.8.6.1.12 |
||||||||||||||||||||||||||||||||||||
|
pktSwchFrCircuitFunnelStat
The funnel status.
|
SNMPv2-TCDisplayString Constraints: range: 0-200Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.8.6.1.13 |
||||||||||||||||||||||||||||||||||||
|
pktSwchFrCircuitTxCongDiscards
The number of frames discarded because of Tx congestion.
|
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.8.6.1.14 |
||||||||||||||||||||||||||||||||||||
|
pktSwchFrCircuitDeTxFrames
The number of DE Tx frames.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.8.6.1.15 |
||||||||||||||||||||||||||||||||||||
|
pktSwchFrCircuitDeRxFrames
The number of DE Rx frames.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.8.6.1.16 |
||||||||||||||||||||||||||||||||||||
|
pktSwchFrCircuitFecnTxFrames
The number of FECN Tx frames.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.8.6.1.17 |
||||||||||||||||||||||||||||||||||||
|
pktSwchFrCircuitBecnTxFrames
The number of BECN Tx frames.
|
SNMPv2-SMICounter32 Constraints: range: 0-255Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.8.6.1.18 |
||||||||||||||||||||||||||||||||||||
|
pktSwchFrCircuitCommRateViolTxFrames
The number of Tx committed rate violations in number of frames.
|
SNMPv2-SMICounter32 Constraints: range: 0-7Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.8.6.1.19 |
||||||||||||||||||||||||||||||||||||
|
pktSwchFrCircuitCommRateViolRxFrames
The number of Rx committed rate violations in number of frames.
|
SNMPv2-SMICounter32 Constraints: range: 1-99Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.8.6.1.20 |
||||||||||||||||||||||||||||||||||||
|
pktSwchFrCircuitExcessRateViolTxFrames
The number of Tx excess rate violations in number of frames.
|
SNMPv2-SMICounter32 Constraints: range: 1-99Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.8.6.1.21 |
||||||||||||||||||||||||||||||||||||
|
pktSwchFrCircuitExcessRateViolRxFrames
The number of Rx excess rate violations in number of frames.
|
SNMPv2-SMICounter32 Constraints: range: 0-200Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.8.6.1.22 |
||||||||||||||||||||||||||||||||||||
|
pktSwchFrCircuitState
Indicates whether the particular virtual cir-
cuit is new or not. |
Enumeration Constraints: range: 0-3 |
.1.3.6.1.4.1.164.8.8.6.1.23 |
||||||||||||||||||||||||||||||||||||
|
pktSwchFrCircuitExtendedDlciA
The no. of the DLCI represented in 23 bits.
|
Integer32 Constraints: range: 0-200 |
.1.3.6.1.4.1.164.8.8.6.1.24 |
||||||||||||||||||||||||||||||||||||
|
pktSwchFrCircuitTxPriorityA
DLCI TX Priority level. The levels are defined in the
pktSwchTxPriorityTable |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.8.8.6.1.25 |
||||||||||||||||||||||||||||||||||||
|
pktSwchFrCircuitIsdnRoutIdA
ISDN destination. ID in the ISDN routing table containing
the outgoing ISDN address for this DLCI. Default value: 0 for no ISDN routing ID. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.8.8.6.1.26 |
pktSwchFrFunnelSTable
table.1.3.6.1.4.1.164.8.8.7
·
1 row entry
·
7 columns
The Frame Relay Funnel Table defines the funnels that DLCIs may use.
Defines the contents of each line in the RAD PS Frame Relay Funnel Table.
Indexes
IF-MIBifIndex pktSwchMpeAddressIdS
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchFrFunnelIndexS
This is the index of the funnel table.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.8.7.1.1 |
||||||||||
|
pktSwchFrFunnelSizeS
The number of frames the funnel can store internally, where each
frame is 512 bytes. |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.8.7.1.2 |
||||||||||
|
pktSwchFrFunnelHighWaterFramesS
The maximum number of frames the funnel can hold before it
expands and transmits all the data. |
Integer32r/w Constraints: range: 0-200 |
.1.3.6.1.4.1.164.8.8.7.1.3 |
||||||||||
|
pktSwchFrFunnelHighWaterBytesS
The maximum number of bytes the funnel can hold before it expands
and transmits all the data. |
Integer32r/w Constraints: range: 0-991 |
.1.3.6.1.4.1.164.8.8.7.1.4 |
||||||||||
|
pktSwchFrFunnelGaugeTxRateS
The outgoing data rate in bytes per window of the funnel.
|
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.8.7.1.5 |
||||||||||
|
pktSwchFrFunnelTransWindowS
The transmission rate is measured during a sliding time window.
This parameter defines the window in 1/10 seconds. |
Integer32r/w Constraints: range: 0-200 |
.1.3.6.1.4.1.164.8.8.7.1.6 |
||||||||||
|
pktSwchFrFunnelStatusS
The status of this funnel table entry. The choices are those defined in the SNMPv2 Textual
Conventions for RowStatus. This will allow easy replacement of the INTEGER syntax with the RowStatus textual convention SYNTAX. |
Enumerationr/w Constraints: range: 0-991 |
.1.3.6.1.4.1.164.8.8.7.1.7 |
pktSwchFrFunnelATable
table.1.3.6.1.4.1.164.8.8.8
·
1 row entry
·
6 columns
The Frame Relay Funnel Table defines the funnels that DLCIs may use.
Defines the contents of each line in the RAD PS Frame Relay Funnel Table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchFrFunnelIndexA
This is the index of the funnel table.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.8.8.1.1 |
||||||||||
|
pktSwchFrFunnelSizeA
The number of frames the funnel can store internally, where each frame is 512 bytes.
|
Integer32 | .1.3.6.1.4.1.164.8.8.8.1.2 |
||||||||||
|
pktSwchFrFunnelHighWaterFramesA
The maximum number of frames the funnel can hold before it expands and transmits all the data.
|
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.8.8.8.1.3 |
||||||||||
|
pktSwchFrFunnelHighWaterBytesA
The maximum number of bytes the funnel can hold before it expands and transmits all the data.
|
Integer32 Constraints: range: 0-200 |
.1.3.6.1.4.1.164.8.8.8.1.4 |
||||||||||
|
pktSwchFrFunnelGaugeTxRateA
The outgoing data rate in bytes per window of the funnel.
|
Integer32 Constraints: range: 0-991 |
.1.3.6.1.4.1.164.8.8.8.1.5 |
||||||||||
|
pktSwchFrFunnelTransWindowA
The transmission rate is measured during a sliding time window. This parameter defines the
window in 1/10 seconds. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.8.8.8.1.6 |
pktSwchFrDlciMapTable
table.1.3.6.1.4.1.164.8.8.9
·
1 row entry
·
4 columns
The Frame Relay Dlci mapping Table maps the Dlci numbers. For each long Dlci a short one is mapped. A long Dlci is a Dlci which contains a Dlci header of 3 or 4 bytes instead of the regular 2 bytes. The long Dlci number has values from 1024 to 8,388,607.
Defines the contents of each Dlci Map Table entry.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
pktSwchFrDlciMapPort
Frame Relay port no. : 1-8 for FPS-8, 1-4 for FPS-4,
1-3 for APS, 1-6 for SPS-6, 1-12 for SPS-12. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.8.9.1.1 |
||||||
|
pktSwchFrDlciMapLongDlci
The Long Dlci number.
For Dlci's of 4 octets, the long Dlci number has values from 1024 to 8,388,607. For Dlci's of 2 octets, the long Dlci number has values of 16-991. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.8.8.9.1.2 |
||||||
|
pktSwchFrDlciMapShortDlci
The Short Dlci number. Legal values: 0 - 1023.
|
Integer32 | .1.3.6.1.4.1.164.8.8.9.1.3 |
||||||
|
pktSwchFrDlciMapStatus
The status of the map row in the Table.
The only value which can be set is: createRequest. This value is set when a new long dlci is created. |
Enumerationr/w | .1.3.6.1.4.1.164.8.8.9.1.4 |
pktSwchMpeSTable
table.1.3.6.1.4.1.164.8.9.1
·
1 row entry
·
9 columns
The MPE Table defines Scratch configuration parameters for the MPE protocol.
Defines the contents of each line in the MPE Table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchMpeLinkNumberS
The link number with which this entry is associated. This value
corresponds to pktSwchPhyInterfaceNumber. There is an entry for each link for which the pktSwchPhyInterfaceProtocol is MPE. |
SNMPv2-SMIInteger32 Constraints: range: 0-255Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.9.1.1.1 |
||||||||||||
|
pktSwchMpeInactivityS
The amount of time in minutes of inactivity that will cause the
session to disconnect. |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.9.1.1.2 |
||||||||||||
|
pktSwchMpeX25FacilitiesS
This specifies the X.25 facilities. The value is a sum of values
(powers of two), where each value in the sum represents an option. The values that may be included in the sum and their meanings are: 0 No options 1… |
Integer32r/w Constraints: range: 5-8 |
.1.3.6.1.4.1.164.8.9.1.1.3 |
||||||||||||
|
pktSwchMpeLocSubAddr1S
The first local subaddress.
|
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.9.1.1.4 |
||||||||||||
|
pktSwchMpeLocSubAddr2S
The second local subaddress.
|
Integer32r/w | .1.3.6.1.4.1.164.8.9.1.1.5 |
||||||||||||
|
pktSwchMpeFlwCtrlDurS
The duration in 50 milliseconds of a hardware flow control signal. Default is 0
|
Integer32r/w | .1.3.6.1.4.1.164.8.9.1.1.6 |
||||||||||||
|
pktSwchMpeFlwCtrlOptS
This specifies the type of flow control of the MPE link. The value
is a sum of values (powers of two), where each value in the sum represents an option. The values that may be included in the sum and their meanings ar… |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.9.1.1.7 |
||||||||||||
|
pktSwchMpeFlwCtrlBufS
The number of buffers that will be allocated for the MPE link.
|
Integer32r/w | .1.3.6.1.4.1.164.8.9.1.1.8 |
||||||||||||
|
pktSwchMpeInternalClkS
The baud rate of the internal clock.
|
Enumerationr/w | .1.3.6.1.4.1.164.8.9.1.1.9 |
pktSwchMpeATable
table.1.3.6.1.4.1.164.8.9.2
·
1 row entry
·
10 columns
The MPE Table defines Active configuration parameters for the MPE protocol.
Defines the contents of each line in the MPE Table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchMpeLinkNumberA
The link number with which this entry is associated. This value
corresponds to pktSwchPhyInterfaceNumber. There is an entry for each link for which the pktSwchPhyInterfaceProtocol is MPE. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.9.2.1.1 |
||||||||||||||||||||||||||
|
pktSwchMpeInactivityA
The amount of time in minutes of inactivity that will cause the
session to disconnect. |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.164.8.9.2.1.2 |
||||||||||||||||||||||||||
|
pktSwchMpeX25FacilitiesA
This specifies the X.25 facilities. The value is a sum of values
(powers of two), where each value in the sum represents an option. The values that may be included in the sum and their meanings are: 0 No options 1… |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.8.9.2.1.3 |
||||||||||||||||||||||||||
|
pktSwchMpeLocSubAddr1A
The first local subaddress.
|
Integer32 Constraints: range: 5-8 |
.1.3.6.1.4.1.164.8.9.2.1.4 |
||||||||||||||||||||||||||
|
pktSwchMpeLocSubAddr2A
The second local subaddress.
|
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.8.9.2.1.5 |
||||||||||||||||||||||||||
|
pktSwchMpeFlwCtrlDurA
The duration in 50 milliseconds of a hardware flow control signal.
|
Integer32 | .1.3.6.1.4.1.164.8.9.2.1.6 |
||||||||||||||||||||||||||
|
pktSwchMpeFlwCtrlOptA
This specifies the type of flow control of the MPE link. The value
is a sum of values (powers of two), where each value in the sum represents an option. The values that may be included in the sum and their meanings ar… |
Integer32 | .1.3.6.1.4.1.164.8.9.2.1.7 |
||||||||||||||||||||||||||
|
pktSwchMpeFlwCtrlBufA
The number of buffers that will be allocated for the MPE link.
|
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.8.9.2.1.8 |
||||||||||||||||||||||||||
|
pktSwchMpeInternalClkA
The baud rate of the internal clock.
|
Enumeration | .1.3.6.1.4.1.164.8.9.2.1.9 |
||||||||||||||||||||||||||
|
pktSwchMpeCtsStatus
The CTS status.
|
Enumeration | .1.3.6.1.4.1.164.8.9.2.1.10 |
pktSwchMpeAidSTable
table.1.3.6.1.4.1.164.8.9.3
·
1 row entry
·
8 columns
The AID Table defines Scratch configuration parameters for the logical connections (Address Id).
Defines the contents of each line in the MPE Table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchMpeAddressIdS
The Address Id (AID) with which this entry is associated.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.9.3.1.1 |
||||||||||||||||||||||||||||||||||||
|
pktSwchMpeAidMainTypeS
The protocol with which the AID is communicating.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.9.3.1.2 |
||||||||||||||||||||||||||||||||||||
|
pktSwchMpeAidMainIdS
The link number of the protocol with which the AID is communicating.
The link number of the protocol with which the AID is communicating. For X.25 SVC this number is Any Autocall ID (Pre-defined) , values… |
Integer32r/w Constraints: range: 1-15 |
.1.3.6.1.4.1.164.8.9.3.1.3 |
||||||||||||||||||||||||||||||||||||
|
pktSwchMpeAidMainSubIdS
The DLCI with which the AID is communicating.
Sub ID is used only when Type is Frame Relay or Inner Comm. The DLCI or destination AID with which the current AID is communicating. If type is: Frame Relay P… |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.9.3.1.4 |
||||||||||||||||||||||||||||||||||||
|
pktSwchMpeAidBackupTypeS
The protocol with which the AID is communicating on the backup.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.9.3.1.5 |
||||||||||||||||||||||||||||||||||||
|
pktSwchMpeAidBackupIdS
The link number of the protocol with which the AID is communicating
on the backup. The link number of the protocol with which the AID is communicating. For X.25 SVC this number is Any Autocall ID (Pre-def… |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.9.3.1.6 |
||||||||||||||||||||||||||||||||||||
|
pktSwchMpeAidBackupSubIdS
The DLCI with which the AID is communicating.
Sub ID is used only when Type is Frame Relay or Inner Comm. The DLCI or destination AID with which the current AID is communicating. If type is: Frame Relay P… |
Integer32r/w | .1.3.6.1.4.1.164.8.9.3.1.7 |
||||||||||||||||||||||||||||||||||||
|
pktSwchMpeAidStatusS
The status of this Address Id table entry.
|
Enumerationr/w | .1.3.6.1.4.1.164.8.9.3.1.8 |
pktSwchMpeAidATable
table.1.3.6.1.4.1.164.8.9.4
·
1 row entry
·
9 columns
The AID Table defines Active configuration parameters for the logical connections (Address Id).
Defines the contents of each line in the MPE Table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchMpeAddressIdA
The Address Id (AID) with which this entry is associated.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.9.4.1.1 |
||||||||||||||||||||||||||||||||||||
|
pktSwchMpeAidMainTypeA
The protocol with which the AID is communicating.
|
Enumeration Constraints: range: 1-15 |
.1.3.6.1.4.1.164.8.9.4.1.2 |
||||||||||||||||||||||||||||||||||||
|
pktSwchMpeAidMainIdA
The link number of the protocol with which the AID is communicating.
The link number of the protocol with which the AID is communicating. For X.25 SVC this number is Any Autocall ID (Pre-defined) , values… |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.8.9.4.1.3 |
||||||||||||||||||||||||||||||||||||
|
pktSwchMpeAidMainSubIdA
The DLCI with which the AID is communicating.
Sub ID is used only when Type is Frame Relay or Inner Comm. The DLCI or destination AID with which the current AID is communicating. If type is: Frame Relay P… |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.8.9.4.1.4 |
||||||||||||||||||||||||||||||||||||
|
pktSwchMpeAidBackupTypeA
The protocol with which the AID is communicating on the backup.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.8.9.4.1.5 |
||||||||||||||||||||||||||||||||||||
|
pktSwchMpeAidBackupIdA
The link number of the protocol with which the AID is communicating
on the backup. The link number of the protocol with which the AID is communicating. For X.25 SVC this number is Any Autocall ID (Pre-def… |
Integer32 | .1.3.6.1.4.1.164.8.9.4.1.6 |
||||||||||||||||||||||||||||||||||||
|
pktSwchMpeAidBackupSubIdA
The DLCI with which the AID is communicating.
Sub ID is used only when Type is Frame Relay or Inner Comm. The DLCI or destination AID with which the current AID is communicating. If type is: Frame Relay P… |
Integer32 | .1.3.6.1.4.1.164.8.9.4.1.7 |
||||||||||||||||||||||||||||||||||||
|
pktSwchMpeAidConn
The connectivity status of the AID.
|
Enumeration | .1.3.6.1.4.1.164.8.9.4.1.8 |
||||||||||||||||||||||||||||||||||||
|
pktSwchMpeAidFlwCtrl
The Flow Control status of the AID.
|
Enumeration | .1.3.6.1.4.1.164.8.9.4.1.9 |
pktSwchSlipSTable
table.1.3.6.1.4.1.164.8.10.1
·
1 row entry
·
10 columns
The Scratch Slip Table contains configuration information for Slip links
Defines the contents of each line in the RAD Slip Table.
Indexes
pktSwchSnaPUNumberS
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchSlipLinkNumberS
The link number with which this entry is associated. This value
corresponds to pktSwchPhyInterfaceIfIndex. There is an entry for each link for which the pktSwchPhyInterfaceProtocol is Slip. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.10.1.1.1 |
||||||||
|
pktSwchSlipSpeedS
This parameter determines the rate of data transmission to
and from the DTE. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.10.1.1.2 |
||||||||
|
pktSwchSlipFCOptionS
The flow control options
0 - No HARDWARE flow control 1..254 - Timer value (in 50ms intervals), when timer expires, flow control stops 255 - The timer is not used |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.10.1.1.3 |
||||||||
|
pktSwchSlipStopBitsS
This entry indicates the number of stop bits per character
supported by the PAD. The options are either (1) one stop bit, (2) two stop bits, or (3) 1.5 stop bits. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.10.1.1.4 |
||||||||
|
pktSwchSlipBitPerCharS
The number of data bits per character supported by the Slip
link. |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.10.1.1.5 |
||||||||
|
pktSwchSlipParityS
This entry selects the type of parity to be checked and or
generated by the PAD when radSPSProfileParTreat is a value other than 255. The options are (1) space parity, (2) mark parity, (3) even parity, (4) odd parity, o… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.10.1.1.6 |
||||||||
|
pktSwchSlipIpAddressS
deprecated
The IP address connected to this Slip port. This variable is
used when an automatic connection is done by the IP Routing. |
RFC1155-SMIIpAddressr/w Enumerated Values:
Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.8.10.1.1.7 |
||||||||
|
pktSwchSlipIpMaskS
deprecated
The IP mask. This variable is
used when an automatic connection by the IP Routing is done. |
RFC1155-SMIIpAddressr/w Enumerated Values:
Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.8.10.1.1.8 |
||||||||
|
pktSwchSlipDefEncapsTypeS
deprecated
Destination protocol of this Slip port. This variable is used
when a direct connection without IP Routing is done. |
Enumerationr/w | .1.3.6.1.4.1.164.8.10.1.1.9 |
||||||||
|
pktSwchSlipDefDestinationS
deprecated
Default destination for this Slip port.
This variable is used when a direct connection without IP Routing is done. Possible values: Default : Not Used. X.25 PVC: Port:LCN or a pre defined PVC number X.25 SVC: … |
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.10.1.1.10 |
pktSwchSlipATable
table.1.3.6.1.4.1.164.8.10.2
·
1 row entry
·
10 columns
The Active Slip Table contains configuration information for Slip links
Defines the contents of each line in the RAD Slip Table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
pktSwchSlipLinkNumberA
The link number with which this entry is associated. This value
corresponds to pktSwchPhyInterfaceIfIndex. There is an entry for each link for which the pktSwchPhyInterfaceProtocol is Slip. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.10.2.1.1 |
||||||
|
pktSwchSlipSpeedA
This parameter determines the rate of data transmission to
and from the DTE. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.8.10.2.1.2 |
||||||
|
pktSwchSlipFCOptionA
The flow control options
0 - No HARDWARE flow control 1..254 - Timer value (in 50ms intervals), when timer expires, flow control stops 255 - The timer is not used |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.8.10.2.1.3 |
||||||
|
pktSwchSlipStopBitsA
This entry indicates the number of stop bits per character
supported by the PAD. The options are either (1) one stop bit, (2) two stop bits, or (3) 1.5 stop bits. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.8.10.2.1.4 |
||||||
|
pktSwchSlipBitPerCharA
The number of data bits per character supported by the Slip
link. |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.8.10.2.1.5 |
||||||
|
pktSwchSlipParityA
This entry selects the type of parity to be checked and or
generated by the PAD when radSPSProfileParTreat is a value other than 255. The options are (1) space parity, (2) mark parity, (3) even parity, (4) odd parity, o… |
Enumeration | .1.3.6.1.4.1.164.8.10.2.1.6 |
||||||
|
pktSwchSlipIpAddressA
deprecated
The IP address connected to this Slip port.
|
RFC1155-SMIIpAddress Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.8.10.2.1.7 |
||||||
|
pktSwchSlipIpMaskA
deprecated
The IP mask.
|
RFC1155-SMIIpAddress Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.8.10.2.1.8 |
||||||
|
pktSwchSlipDefEncapsTypeA
deprecated
Destination protocol of this Slip port.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.8.10.2.1.9 |
||||||
|
pktSwchSlipDefDestinationA
deprecated
Default destination for this Slip port.
This variable is used when a direct connection without IP Routing is done. Possible values: Default : Not Used. X.25 PVC: Port:LCN or a pre defined PVC number X.25 SVC: … |
SNMPv2-TCDisplayString Constraints: range: 1-1Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.10.2.1.10 |
pktSwchSnaSDLCLinkTableS
table.1.3.6.1.4.1.164.8.11.1
·
1 row entry
·
7 columns
The SDLC Link Table defines the SDLC links configured on the PS.
SDLC Link Entry defines the contents of each link in the SDLC Link Table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
pktSwchSnaSDLCLinkTypeS
This parameter identifies whether this link operates as
TPAD(Primary) or HPAD(Secondary) SDLC device. |
Enumerationr/w Constraints: range: 1-3 |
.1.3.6.1.4.1.164.8.11.1.1.1 |
||||
|
pktSwchSnaSDLCLinkPUSharedS
This parameter defines whether the link participates with more than
one PU or not. |
Enumerationr/w Constraints: range: 137-7642 |
.1.3.6.1.4.1.164.8.11.1.1.2 |
||||
|
pktSwchSnaSDLCLinkDuplexPhyS
This parameter describes whether the physical level of the
SDLC line is half or full duplex. |
Enumerationr/w | .1.3.6.1.4.1.164.8.11.1.1.3 |
||||
|
pktSwchSnaSDLCLinkflagsS
Number of flags between frames.
|
Integer32r/w Constraints: range: 1-1 |
.1.3.6.1.4.1.164.8.11.1.1.4 |
||||
|
pktSwchSnaSDLCLinkDuplexS
This parameter shows wether the link level is Two Way Alternate
or Two Way Simultaneous. |
Enumerationr/w | .1.3.6.1.4.1.164.8.11.1.1.5 |
||||
|
pktSwchSnaSDLCLinkClockS
This parameter defines the link clock rate
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.11.1.1.6 |
||||
|
pktSwchSnaSDLCLinkNRZS
This parameter describes the following combinations of NRZ,
NRZI with FLAGS or IDLE between frames: Legal values: 1 - NRZ with FLAGs between frames. RTS is Constant 2 - NRZI with FLAGs between frames. RTS is Constant… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.11.1.1.7 |
pktSwchSnaSDLCLinkTableA
table.1.3.6.1.4.1.164.8.11.2
·
1 row entry
·
11 columns
The SDLC Link Table defines the SDLC links configured on the SPS.
SDLC Link Entry defines the contents of each link in the SDLC Link Table.
Indexes
pktSwchSnaPUSdlcNumberA pktSwchSnaPUSdlcSideA
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
pktSwchSnaSDLCLinkTypeA
This parameter identifies whether this link operates as
TPAD(Primary) or HPAD(Secondary) SDLC device. |
Enumeration | .1.3.6.1.4.1.164.8.11.2.1.1 |
||||
|
pktSwchSnaSDLCLinkPUSharedA
This parameter defines whether the link participates with more
than one PU or not. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.8.11.2.1.2 |
||||
|
pktSwchSnaSDLCLinkDuplexPhyA
This parameter describes whether the physical level of the
SDLC line is half or full duplex. |
Enumeration Constraints: range: 1-1 |
.1.3.6.1.4.1.164.8.11.2.1.3 |
||||
|
pktSwchSnaSDLCLinkflagsA
Number of flags between frames.
|
Integer32 | .1.3.6.1.4.1.164.8.11.2.1.4 |
||||
|
pktSwchSnaSDLCLinkDuplexA
This parameter shows wether the link level is Two Way Alternate
or Two Way Simultaneous. |
Enumeration Constraints: range: 1-2 |
.1.3.6.1.4.1.164.8.11.2.1.5 |
||||
|
pktSwchSnaSDLCLinkClockA
This parameter defines the link clock rate.
|
Enumeration Constraints: range: 1-3 |
.1.3.6.1.4.1.164.8.11.2.1.6 |
||||
|
pktSwchSnaSDLCLinkNRZA
This parameter describes the following combinations of NRZ,
NRZI with FLAGS or IDLE between frames: Legal values: 1 - NRZ with FLAGs between frames. RTS is Constant 2 - NRZI with FLAGs between frames. RTS is Constant… |
Enumeration Constraints: range: 137-7642 |
.1.3.6.1.4.1.164.8.11.2.1.7 |
||||
|
pktSwchSnaSDLCLinkStatFrames
The number of frames received or transmitted via this link
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.2.1.8 |
||||
|
pktSwchSnaSDLCLinkStatErrors
The number of error frames received.
|
SNMPv2-SMICounter32 Constraints: range: 1-1Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.2.1.9 |
||||
|
pktSwchSnaSDLCLinkStatInvalidAddresses
The number of frames with wrong address received by this link.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.2.1.10 |
||||
|
pktSwchSnaSDLCLinkStatShortFrames
The number of short frames received by this link.
|
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.2.1.11 |
pktSwchSnaPUTableS
table.1.3.6.1.4.1.164.8.11.3
·
1 row entry
·
8 columns
The SDLC PU table defines the PUs configured on the PS.
SDLC PU Entry defines the contents of each PU in the
SDLC PU Table.
SDLC PU Table.
Indexes
pktSwchSnaPUSdlcStatNumber pktSwchSnaPUSdlcStatSide
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
pktSwchSnaPUNumberS
This parameter defines an identifier associated with the PU Entry
which is unique within the SPS |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.11.3.1.1 |
||||
|
pktSwchSnaPUXIDProcessingS
Exchange Identification (XID) processing. The following values are legal:
1 - Local XID handling 2 - End-to-End XID handling, Support for NON-Activation XID 3 - End-to-End XID handling, NO Support for NON-Activation XID |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.11.3.1.2 |
||||
|
pktSwchSnaPUEnableS
The PU runs or not at this specific time
|
Enumerationr/w | .1.3.6.1.4.1.164.8.11.3.1.3 |
||||
|
pktSwchSnaPULinkATypeS
The PU link A type.
|
Enumerationr/w | .1.3.6.1.4.1.164.8.11.3.1.4 |
||||
|
pktSwchSnaPULinkARoleS
The PU role for link A. Note that the role of an SDLC PU may
not be changed. It is defined by the SDLC Link Type. |
Enumerationr/w | .1.3.6.1.4.1.164.8.11.3.1.5 |
||||
|
pktSwchSnaPULinkBTypeS
The PU partner link B type
|
Enumerationr/w | .1.3.6.1.4.1.164.8.11.3.1.6 |
||||
|
pktSwchSnaPULinkBRoleS
The PU role for link B. Note that the role of an SDLC PU may
not be changed. It is defined by the SDLC Link Type. |
Enumerationr/w | .1.3.6.1.4.1.164.8.11.3.1.7 |
||||
|
pktSwchSnaPUEntryStatusS
The status of this PU table entry.
This Set request will fail if there are any conflicts between any of of the parameter values in any of the tables comprising this PU definition |
Enumerationr/w | .1.3.6.1.4.1.164.8.11.3.1.8 |
pktSwchSnaPUTableA
table.1.3.6.1.4.1.164.8.11.4
·
1 row entry
·
7 columns
The SDLC PU table defines the PUs configured on the PS.
SDLC PU Entry defines the contents of each PU in the
SDLC PU Table.
SDLC PU Table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
pktSwchSnaPUNumberA
This parameter defines an identifier associated with the PU Entry
which is unique within the SPS |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.11.4.1.1 |
|
pktSwchSnaPUXIDProcessingA
The PU XID Processing
|
Enumeration | .1.3.6.1.4.1.164.8.11.4.1.2 |
|
pktSwchSnaPUEnableA
The PU runs or not at this specific time
|
Enumeration | .1.3.6.1.4.1.164.8.11.4.1.3 |
|
pktSwchSnaPULinkATypeA
The PU link type
|
Enumeration | .1.3.6.1.4.1.164.8.11.4.1.4 |
|
pktSwchSnaPULinkARoleA
The PU role for link A
|
Enumeration | .1.3.6.1.4.1.164.8.11.4.1.5 |
|
pktSwchSnaPULinkBTypeA
The PU partner link type
|
Enumeration | .1.3.6.1.4.1.164.8.11.4.1.6 |
|
pktSwchSnaPULinkBRoleA
The PU role for link B
|
Enumeration | .1.3.6.1.4.1.164.8.11.4.1.7 |
pktSwchSnaPUSdlcTableS
table.1.3.6.1.4.1.164.8.11.5
·
1 row entry
·
12 columns
Defines links for PUs running on SDLC link
Defines parameters of a link for a PU running on an SDLC link
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchSnaPUSdlcNumberS
This parameter defines an identifier associated with the PU Entry
SDLC side, which is unique within the SPS |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.11.5.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||
|
pktSwchSnaPUSdlcSideS
Is this side A or side B of the PU definition
|
Enumeration | .1.3.6.1.4.1.164.8.11.5.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||
|
pktSwchSnaPUSdlcAddressS
SNA SDLC PU address. Range: 0x00-0xFE
|
OctetStringr/w | .1.3.6.1.4.1.164.8.11.5.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||
|
pktSwchSnaPUSdlcIfIndexS
ifIndex of the SDLC link
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.11.5.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||
|
pktSwchSnaPUSdlcIdBlkS
Part of the IBM device ID (the full ID is defined by the IDBLK and
the IDNUM). The Idblk is required for secondary PU with Local XID handling. Up to 3 Hexadecimal digits, format: 0X XX. |
OctetStringr/w | .1.3.6.1.4.1.164.8.11.5.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||
|
pktSwchSnaPUSdlcIdNumS
Second part of the IBM device ID (the full ID is defined by the IDBLK and
the IDNUM). The Idnum is required for secondary PU with Local XID handling. Up to 5 Hexadecimal digits, format: 0X XX XX. |
OctetStringr/w | .1.3.6.1.4.1.164.8.11.5.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||
|
pktSwchSnaPUSdlcMaxPiuSizeS
Maximum Path Information Size
|
Integer32r/w | .1.3.6.1.4.1.164.8.11.5.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||
|
pktSwchSnaPUSdlcTxWindowS
Window Size(in frames) used when sending from the SPS. Range: 1-7.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.11.5.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||
|
pktSwchSnaPUSdlcGrpAddressS
SNA Group address used by the SPS when sending polls (TPAD ONLY).
Range: 0x00-0xFE |
OctetStringr/w | .1.3.6.1.4.1.164.8.11.5.1.9 |
||||||||||||||||||||||||||||||||||||||||||||||
|
pktSwchSnaPUSdlcPollTimerS
Time in between polls in 50 millisecond increments (TPAD ONLY).
Range: 1-65535. |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.11.5.1.10 |
||||||||||||||||||||||||||||||||||||||||||||||
|
pktSwchSnaPUSdlcXIDInitiationS
This parameter is not applicable for PU with Local XID handling.
Legal values: 1 - Do not initiate an XID message. 2 - Initiate an XID message to SDLC. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.11.5.1.11 |
||||||||||||||||||||||||||||||||||||||||||||||
|
pktSwchSnaPUSdlcEntryStatusS
The status of this PU Sdlc table entry.
In order to save this entry, set status to valid. An underCreation value is set by the Agent when this entry is updated. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.11.5.1.12 |
pktSwchSnaPUSdlcTableA
table.1.3.6.1.4.1.164.8.11.6
·
1 row entry
·
11 columns
Defines links for PUs running on an SDLC link
Defines parameters of link for PU running on an SDLC link
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
pktSwchSnaPUSdlcNumberA
This parameter defines an identifier associated with the PU Entry
SDLC side, which is unique within the SPS |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.11.6.1.1 |
||||
|
pktSwchSnaPUSdlcSideA
Is this side A or side B of the PU definition
|
Enumeration | .1.3.6.1.4.1.164.8.11.6.1.2 |
||||
|
pktSwchSnaPUSdlcAddressA
SNA SDLC PU address. Range: 0x00-0xFE.
|
OctetString Enumerated Values:
|
.1.3.6.1.4.1.164.8.11.6.1.3 |
||||
|
pktSwchSnaPUSdlcIfIndexA
ifIndex of the SDLC link
|
SNMPv2-SMIInteger32 Constraints: range: 1-2Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.11.6.1.4 |
||||
|
pktSwchSnaPUSdlcIdBlkA
Part of the IBM device ID (the full ID is defined by the IDBLK and
the IDNUM). The Idblk is required for secondary PU with Local XID handling. Up to 3 Hexadecimal digits, format: 0X XX. |
OctetString Constraints: range: 1-3 |
.1.3.6.1.4.1.164.8.11.6.1.5 |
||||
|
pktSwchSnaPUSdlcIdNumA
Second part of the IBM device ID (the full ID is defined by the IDBLK and
the IDNUM). The Idnum is required for secondary PU with Local XID handling. Up to 5 Hexadecimal digits, format: 0X XX XX. |
OctetString Enumerated Values:
|
.1.3.6.1.4.1.164.8.11.6.1.6 |
||||
|
pktSwchSnaPUSdlcMaxPiuSizeA
Maximum Path Information Size
|
Integer32 Constraints: range: 137-7642 |
.1.3.6.1.4.1.164.8.11.6.1.7 |
||||
|
pktSwchSnaPUSdlcTxWindowA
Window Size(in frames) used when sending from the SPS.
Range: 1-7. |
SNMPv2-SMIInteger32 Constraints: range: 1-1Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.11.6.1.8 |
||||
|
pktSwchSnaPUSdlcGrpAddressA
SNA Group address used by the SPS when sending polls (TPAD ONLY).
Range: 0x00-0xFE. |
OctetString Constraints: range: 1-8 |
.1.3.6.1.4.1.164.8.11.6.1.9 |
||||
|
pktSwchSnaPUSdlcPollTimerA
Time in between polls in 50 millisecond increments (TPAD ONLY).
Range: 1-65535. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.11.6.1.10 |
||||
|
pktSwchSnaPUSdlcXIDInitiationA
This parameter is not applicable for PU with Local XID handling.
Legal values: 1 - Do not initiate an XID message. 2 - Initiate an XID message to SDLC. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.8.11.6.1.11 |
.1.3.6.1.4.1.164.8.11.7
·
1 row entry
·
32 columns
Shows Link Statistics for PUs running on an SDLC link
Shows Link Statistics for PUs running on an SDLC link
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
pktSwchSnaPUSdlcStatNumber
This parameter defines an identifier associated with the PU Entry
SDLC side statistics, which is unique within the SPS |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.11.7.1.1 |
||||
|
pktSwchSnaPUSdlcStatSide
Is this side A or side B of the PU definition
|
Enumeration | .1.3.6.1.4.1.164.8.11.7.1.2 |
||||
| pktSwchSnaPUSdlcStatOctetsIn | SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.7.1.3 |
||||
| pktSwchSnaPUSdlcStatOctetsOut | SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.7.1.4 |
||||
| pktSwchSnaPUSdlcStatIFramesIn | SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.7.1.5 |
||||
| pktSwchSnaPUSdlcStatIFramesOut | SNMPv2-SMICounter32 Constraints: range: 1-2Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.7.1.6 |
||||
| pktSwchSnaPUSdlcStatRRFramesIn | SNMPv2-SMICounter32 Constraints: range: 1-3Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.7.1.7 |
||||
| pktSwchSnaPUSdlcStatRRFramesOut | SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.7.1.8 |
||||
| pktSwchSnaPUSdlcStatRNRFramesIn | SNMPv2-SMICounter32 Constraints: range: 137-7642Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.7.1.9 |
||||
| pktSwchSnaPUSdlcStatRNRFramesOut | SNMPv2-SMICounter32 Constraints: range: 1-1Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.7.1.10 |
||||
| pktSwchSnaPUSdlcStatXIDsIn | SNMPv2-SMICounter32 Constraints: range: 1-8Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.7.1.11 |
||||
| pktSwchSnaPUSdlcStatXIDsOut | SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.7.1.12 |
||||
| pktSwchSnaPUSdlcStatTESTsIn | SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.7.1.13 |
||||
| pktSwchSnaPUSdlcStatTESTsOut | SNMPv2-SMICounter32 Constraints: range: 1-15Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.7.1.14 |
||||
| pktSwchSnaPUSdlcStatREJsIn | SNMPv2-SMICounter32 Constraints: range: 1-60Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.7.1.15 |
||||
| pktSwchSnaPUSdlcStatREJsOut | SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.7.1.16 |
||||
| pktSwchSnaPUSdlcStatFRMRsIn | SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.7.1.17 |
||||
| pktSwchSnaPUSdlcStatFRMRsOut | SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.7.1.18 |
||||
| pktSwchSnaPUSdlcStatDISCsIn | SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.7.1.19 |
||||
| pktSwchSnaPUSdlcStatDISCsOut | SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.7.1.20 |
||||
| pktSwchSnaPUSdlcStatUAsIn | SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.7.1.21 |
||||
| pktSwchSnaPUSdlcStatUAsOut | SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.7.1.22 |
||||
| pktSwchSnaPUSdlcStatDMsIn | SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.7.1.23 |
||||
| pktSwchSnaPUSdlcStatDMsOut | SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.7.1.24 |
||||
| pktSwchSnaPUSdlcStatSNRMsIn | SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.7.1.25 |
||||
| pktSwchSnaPUSdlcStatSNRMsOut | SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.7.1.26 |
||||
| pktSwchSnaPUSdlcStatRetransmitsIn | SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.7.1.27 |
||||
| pktSwchSnaPUSdlcStatRetransmitsOut | SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.7.1.28 |
||||
|
pktSwchSnaPUSdlcUpperState
The internal DLPI state of the connection.
|
Enumeration | .1.3.6.1.4.1.164.8.11.7.1.29 |
||||
|
pktSwchSnaPUSdlcLowerState
The internal SDLC state of the connection.
|
Enumeration | .1.3.6.1.4.1.164.8.11.7.1.30 |
||||
|
pktSwchSnaPUSdlcStatNRMStatus
This variable indicates if the link is in Normal Response Mode or not.
|
Enumeration | .1.3.6.1.4.1.164.8.11.7.1.31 |
||||
|
pktSwchSnaPUSdlcStatFlowCtlStatus
This variable indicates the flow control status of the PU interface.
|
Enumeration | .1.3.6.1.4.1.164.8.11.7.1.32 |
.1.3.6.1.4.1.164.8.11.8
·
1 row entry
·
13 columns
Defines links for PUs running on a QLLC link
Defines parameters for PU side running on SDLC link
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchSnaPUX25QllcNumberS
This parameter defines an identifier associated with the PU Entry
X25\QLLC side, which is unique within the SPS |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.11.8.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||
|
pktSwchSnaPUX25QllcSideS
Is there side A or B of the PU connection
|
Enumeration | .1.3.6.1.4.1.164.8.11.8.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||
|
pktSwchSnaPUX25QllcIdBlkS
Part of the IBM device ID (the full ID is defined by the IDBLK and
the IDNUM). The Idblk is required for secondary PU with Local XID handling. Up to 3 Hexadecimal digits, format: 0X XX. |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.11.8.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||
|
pktSwchSnaPUX25QllcIdNumS
Second part of the IBM device ID (the full ID is defined by the IDBLK and
the IDNUM). The Idnum is required for secondary PU with Local XID handling. Up to 5 Hexadecimal digits, format: 0X XX XX. |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.11.8.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||
|
pktSwchSnaPUX25QllcXIDInitS
This parameter is not applicable for PU with Local XID handling.
Legal values: 1 - Do not initiate an XID message. 2 - Initiate an XID message to QLLC. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.11.8.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||
|
pktSwchSnaPUX25QllcMaxPiuSizeS
Maximum Path Information Size
|
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.11.8.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||
|
pktSwchSnaPUX25QllcStationAddressS
QLLC PU Link Station Address. Range: 0x01-0xFE.
This parameter is applicable only for PU with End-to-End XID handling, Support for NON-Activation XID. |
OctetStringr/w | .1.3.6.1.4.1.164.8.11.8.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||
|
pktSwchSnaPUX25QllcInPasswordS
A field matched with the call user data in call request packets for
purposes of security and correlation. |
OctetStringr/w | .1.3.6.1.4.1.164.8.11.8.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||
|
pktSwchSnaPUX25QllcSubAddressS
The X.25 Sub-address associated with the PU Entry for routing
incoming call indications. Range: 0-99. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.11.8.1.9 |
||||||||||||||||||||||||||||||||||||||||||||||
|
pktSwchSnaPUX25QllcAutoCallS
This parameter indicates whether the SPS automatically initiates
an X.25 call request or not. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.11.8.1.10 |
||||||||||||||||||||||||||||||||||||||||||||||
|
pktSwchSnaPUX25QllcCalledAddressS
The destination x.25 DTE address to which the SPS calls. Used with
AutoCall only. |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.11.8.1.11 |
||||||||||||||||||||||||||||||||||||||||||||||
|
pktSwchSnaPUX25QllcCallUserDataFacilitiesS
The X.25 facilities and Call User Data which the SPS uses on
outgoing calls. AutoCall only. Up to 60 Hexa-Decimal digits. Each pair of digits represents a BYTE. BYTE-0 BYTE-1 BYTE-2 ... BYTE-29 (30 Bytes maximum) … |
OctetStringr/w Constraints: range: 6-6 |
.1.3.6.1.4.1.164.8.11.8.1.12 |
||||||||||||||||||||||||||||||||||||||||||||||
|
pktSwchSnaPUX25QllcEntryStatusS
The status of this PU Qllc table entry.
In order to save this entry, set status to valid. An underCreation value is set by the Agent when this entry is updated. |
Enumerationr/w Constraints: range: 1-1 |
.1.3.6.1.4.1.164.8.11.8.1.13 |
.1.3.6.1.4.1.164.8.11.9
·
1 row entry
·
12 columns
Defines links for PUs running on a QLLC link
Defines parameters for PU side running on an SDLC link
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
pktSwchSnaPUX25QllcNumberA
This parameter defines an identifier associated with the PU Entry
X25\QLLC side, which is unique within the SPS |
SNMPv2-SMIInteger32 Constraints: range: 1-3Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.11.9.1.1 |
||||
|
pktSwchSnaPUX25QllcSideA
Is there side A or B of the PU connection
|
Enumeration Constraints: range: 137-7642 |
.1.3.6.1.4.1.164.8.11.9.1.2 |
||||
|
pktSwchSnaPUX25QllcIdBlkA
Part of the IBM device ID (the full ID is defined by the IDBLK and
the IDNUM). The Idblk is required for secondary PU with Local XID handling. Up to 3 Hexadecimal digits, format: 0X XX. |
OctetString | .1.3.6.1.4.1.164.8.11.9.1.3 |
||||
|
pktSwchSnaPUX25QllcIdNumA
Second part of the IBM device ID (the full ID is defined by the IDBLK and
the IDNUM). The Idnum is required for secondary PU with Local XID handling. Up to 5 Hexadecimal digits, format: 0X XX XX. |
OctetString | .1.3.6.1.4.1.164.8.11.9.1.4 |
||||
|
pktSwchSnaPUX25QllcXIDInitA
This parameter is not applicable for PU with Local XID handling.
Legal values: 1 - Do not initiate an XID message. 2 - Initiate an XID message to QLLC. |
Enumeration | .1.3.6.1.4.1.164.8.11.9.1.5 |
||||
|
pktSwchSnaPUX25QllcMaxPiuSizeA
Maximum Path Information Size
|
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.8.11.9.1.6 |
||||
|
pktSwchSnaPUX25QllcStationAddressA
QLLC PU Link Station Address. Range: 0x01-0xFE.
This parameter is applicable only for PU with End-to-End XID handling, Support for NON-Activation XID. |
OctetString Constraints: range: 1-99999 |
.1.3.6.1.4.1.164.8.11.9.1.7 |
||||
|
pktSwchSnaPUX25QllcInPasswordA
A field matched with the call user data in call request packets for
purposes of security and correlation. |
OctetString Constraints: range: 1-99999 |
.1.3.6.1.4.1.164.8.11.9.1.8 |
||||
|
pktSwchSnaPUX25QllcSubAddressA
The X.25 Sub-address associated with the PU Entry for routing
incoming call indications. Range: 0-99. |
SNMPv2-SMIInteger32 Constraints: range: 1-99999Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.11.9.1.9 |
||||
|
pktSwchSnaPUX25QllcAutoCallA
This parameter indicates whether the SPS automatically initiates
an X.25 call request or not. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.8.11.9.1.10 |
||||
|
pktSwchSnaPUX25QllcCalledAddressA
The destination x.25 DTE address to which the SPS calls. Used
with AutoCall only. |
OctetString | .1.3.6.1.4.1.164.8.11.9.1.11 |
||||
|
pktSwchSnaPUX25QllcCallUserDataFacilitiesA
The X.25 facilities and Call User Data which the SPS uses on
outgoing calls. AutoCall only. Up to 60 Hexa-Decimal digits. Each pair of digits represents a BYTE. BYTE-0 BYTE-1 BYTE-2 ... BYTE-29 (30 Bytes maximum) … |
OctetString | .1.3.6.1.4.1.164.8.11.9.1.12 |
.1.3.6.1.4.1.164.8.11.10
·
1 row entry
·
23 columns
Shows link statistics for PUs running on a QLLC link
Shows link statistics for PUs running on a QLLC link
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
pktSwchSnaPUX25QllcStatNumber
This parameter defines an identifier associated with the PU Entry
X25\QLLC side, which is unique within the SPS |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.11.10.1.1 |
||||||
|
pktSwchSnaPUX25QllcStatSide
Is there side A or B of the PU connection
|
Enumeration Constraints: range: 6-6 |
.1.3.6.1.4.1.164.8.11.10.1.2 |
||||||
|
pktSwchSnaPUX25QllcStatlink
The Link on which the Qllc conversation is conducted. If there is
no conversation the variable will be 0. |
SNMPv2-SMIInteger32 Constraints: range: 1-1Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.11.10.1.3 |
||||||
| pktSwchSnaPUX25QllcStatDataPacketsIn | SNMPv2-SMICounter32 Constraints: range: 1-1Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.10.1.4 |
||||||
| pktSwchSnaPUX25QllcStatDataPacketsOut | SNMPv2-SMICounter32 Constraints: range: 1-2Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.10.1.5 |
||||||
| pktSwchSnaPUX25QllcStatQSMPacketsIn | SNMPv2-SMICounter32 Constraints: range: 1-3Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.10.1.6 |
||||||
| pktSwchSnaPUX25QllcStatQSMPacketsOut | SNMPv2-SMICounter32 Constraints: range: 137-7642Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.10.1.7 |
||||||
| pktSwchSnaPUX25QllcStatQDMPacketsIn | SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.10.1.8 |
||||||
| pktSwchSnaPUX25QllcStatQDMPacketsOut | SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.10.1.9 |
||||||
| pktSwchSnaPUX25QllcStatXIDPacketsIn | SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.10.1.10 |
||||||
| pktSwchSnaPUX25QllcStatXIDPacketsOut | SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.10.1.11 |
||||||
| pktSwchSnaPUX25QllcStatQDISCPacketsIn | SNMPv2-SMICounter32 Constraints: range: 1-99999Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.10.1.12 |
||||||
| pktSwchSnaPUX25QllcStatQDISCPacketsOut | SNMPv2-SMICounter32 Constraints: range: 1-99999Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.10.1.13 |
||||||
| pktSwchSnaPUX25QllcStatCallPacketsIn | SNMPv2-SMICounter32 Constraints: range: 1-99999Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.10.1.14 |
||||||
| pktSwchSnaPUX25QllcStatCallPacketsOut | SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.10.1.15 |
||||||
| pktSwchSnaPUX25QllcStatClearPacketsIn | SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.10.1.16 |
||||||
| pktSwchSnaPUX25QllcStatClearPacketsOut | SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.10.1.17 |
||||||
| pktSwchSnaPUX25QllcStatCallAcceptsIn | SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.10.1.18 |
||||||
| pktSwchSnaPUX25QllcStatCallAcceptsOut | SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.10.1.19 |
||||||
|
pktSwchSnaPUX25QllcStatUpperState
The internal DLPI state of the connection.
|
Enumeration | .1.3.6.1.4.1.164.8.11.10.1.20 |
||||||
|
pktSwchSnaPUX25QllcStatLowerState
The internal QLLC state of the connection.
|
Enumeration | .1.3.6.1.4.1.164.8.11.10.1.21 |
||||||
|
pktSwchSnaPUX25QllcStatNRMStatus
This variable indicates if the link is in Normal Response Mode or not.
|
Enumeration | .1.3.6.1.4.1.164.8.11.10.1.22 |
||||||
|
pktSwchSnaPUX25QllcStatFlowCtlStatus
This variable indicates the flow control status of the PU interface.
|
Enumeration | .1.3.6.1.4.1.164.8.11.10.1.23 |
pktSwchSnaPULlc2FrTableS
table.1.3.6.1.4.1.164.8.11.11
·
1 row entry
·
17 columns
Defines LLC2/Frame Relay/RFC1490 Protocol Interface of SPS SNA PU entity.
Defines parameters for PU LLC2 Protocol Interface over Frame Relay Protocol using RFC 1490.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
pktSwchSnaPULlc2FrNumberS
Unique Identifier for this PU. The value in this field is used as a common Key in both this table and the Main PU table.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.11.11.1.1 |
|
pktSwchSnaPULlc2FrSideS
Indicates for each side (SIDE-A and SIDE-B) if the Protocol Interface for that side has been defined or not.
|
Enumeration | .1.3.6.1.4.1.164.8.11.11.1.2 |
|
pktSwchSnaPULlc2FrEncapsTypeS
Indicates if the LLC2/RFC1490 Protocol Interface uses the BNN, BAN
or TREN method of Frame Encapsulation. |
Enumerationr/w | .1.3.6.1.4.1.164.8.11.11.1.3 |
|
pktSwchSnaPULlc2FrDestMACS
The LLC2 Destination MAC Address.
|
OctetStringr/w | .1.3.6.1.4.1.164.8.11.11.1.4 |
|
pktSwchSnaPULlc2FrSrcSAPS
The LLC2 Source SAP Address. 2 Hex digits
|
OctetStringr/w | .1.3.6.1.4.1.164.8.11.11.1.5 |
|
pktSwchSnaPULlc2FrDestSAPS
The LLC2 Destination SAP.
|
OctetStringr/w | .1.3.6.1.4.1.164.8.11.11.1.6 |
|
pktSwchSnaPULlc2FrXIDIdBlkS
Part of the IBM device ID (the full ID is defined by the IDBLK and
the IDNUM). The IDBLK is required for PU with Local XID handling or PU with End-to-End XID handling, NO Support for NON-Activation XID. Up to 3 Hexadeci… |
OctetStringr/w | .1.3.6.1.4.1.164.8.11.11.1.7 |
|
pktSwchSnaPULlc2FrXIDIdNumS
Second part of the IBM device ID (the full ID is defined by the IDBLK and
the IDNUM). The IDNUM is required for PU with Local XID handling or PU with End-to-End XID handling, NO Support for NON-Activation XID. Up to 5 H… |
OctetStringr/w | .1.3.6.1.4.1.164.8.11.11.1.8 |
|
pktSwchSnaPULlc2FrMaxPiuSizeS
Maximum Path Information Size
|
Integer32r/w | .1.3.6.1.4.1.164.8.11.11.1.9 |
|
pktSwchSnaPULlc2FrTxWindowS
The LLC2 Link Window Size.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.11.11.1.10 |
|
pktSwchSnaPULlc2FrLinkS
The SPS Frame Relay Link Number which this LLC2 Protocol Interface is associated with.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.11.11.1.11 |
|
pktSwchSnaPULlc2FrDLCIS
The SPS Frame Relay DLCI Number which this LLC2 Protocol Interface is associated with.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.11.11.1.12 |
|
pktSwchSnaPULlc2FrXIDInitiationS
This parameter is not applicable for PU with Local XID handling.
Legal values: 1 - Do not initiate an XID message. 2 - Initiate an XID message to LLC2. |
Enumerationr/w | .1.3.6.1.4.1.164.8.11.11.1.13 |
|
pktSwchSnaPULlc2FrN2CountS
N2 Count
|
Integer32r/w | .1.3.6.1.4.1.164.8.11.11.1.14 |
|
pktSwchSnaPULlc2FrT1TimerS
T1 Timer in 1/10 of a second.
|
Integer32r/w | .1.3.6.1.4.1.164.8.11.11.1.15 |
|
pktSwchSnaPULlc2FrTiTimerS
TI Timer in seconds
|
Integer32r/w | .1.3.6.1.4.1.164.8.11.11.1.16 |
|
pktSwchSnaPULlc2FrEntryStatusS
The status of this PU Llc2 table entry.
In order to save this entry, set status to valid. An underCreation value is set by the Agent when this entry is updated. |
Enumerationr/w | .1.3.6.1.4.1.164.8.11.11.1.17 |
pktSwchSnaPULlc2FrTableA
table.1.3.6.1.4.1.164.8.11.12
·
1 row entry
·
16 columns
Defines links for PUs running on an LLC2 link
Defines parameters for PU LLC2 Protocol Interface over Frame Relay Protocol using RFC 1490.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchSnaPULlc2FrNumberA
Unique Identifier for this PU. The value in this field is used as a common Key in both this table and the Main PU table.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.11.12.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||
|
pktSwchSnaPULlc2FrSideA
Indicates for each side (SIDE-A and SIDE-B) if the Protocol Interface for that side has been defined or not.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.8.11.12.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||
|
pktSwchSnaPULlc2FrEncapsTypeA
Indicates if the LLC2/RFC1490 Protocol Interface uses the BNN, BAN
or TREN method of Frame Encapsulation. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.8.11.12.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||
|
pktSwchSnaPULlc2FrDestMACA
The LLC2 Destination MAC Address.
|
OctetString Enumerated Values:
|
.1.3.6.1.4.1.164.8.11.12.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||
|
pktSwchSnaPULlc2FrSrcSAPA
The LLC2 Source SAP Address.
|
OctetString | .1.3.6.1.4.1.164.8.11.12.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||
|
pktSwchSnaPULlc2FrDestSAPA
The LLC2 Destination SAP.
|
OctetString | .1.3.6.1.4.1.164.8.11.12.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||
|
pktSwchSnaPULlc2FrXIDIdBlkA
Part of the IBM device ID (the full ID is defined by the IDBLK and
the IDNUM). The IDBLK is required for PU with Local XID handling or PU with End-to-End XID handling, NO Support for NON-Activation XID. Up to 3 Hexadeci… |
OctetString Enumerated Values:
|
.1.3.6.1.4.1.164.8.11.12.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||
|
pktSwchSnaPULlc2FrXIDIdNumA
Second part of the IBM device ID (the full ID is defined by the IDBLK and
the IDNUM). The IDNUM is required for PU with Local XID handling or PU with End-to-End XID handling, NO Support for NON-Activation XID. Up to 5 H… |
OctetString Constraints: range: 6-6 |
.1.3.6.1.4.1.164.8.11.12.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||
|
pktSwchSnaPULlc2FrMaxPiuSizeA
Maximum Path Information Size
|
Integer32 | .1.3.6.1.4.1.164.8.11.12.1.9 |
||||||||||||||||||||||||||||||||||||||||||||||
|
pktSwchSnaPULlc2FrTxWindowA
The LLC2 Link Window Size.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.11.12.1.10 |
||||||||||||||||||||||||||||||||||||||||||||||
|
pktSwchSnaPULlc2FrLinkA
The SPS Frame Relay Link Number which this LLC2 Protocol Interface is associated with.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.11.12.1.11 |
||||||||||||||||||||||||||||||||||||||||||||||
|
pktSwchSnaPULlc2FrDLCIA
The SPS Frame Relay DLCI Number which this LLC2 Protocol Interface is associated with.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.11.12.1.12 |
||||||||||||||||||||||||||||||||||||||||||||||
|
pktSwchSnaPULlc2FrXIDInitiationA
This parameter is not applicable for PU with Local XID handling.
Legal values: 1 - Do not initiate an XID message. 2 - Initiate an XID message to LLC2. |
Enumeration | .1.3.6.1.4.1.164.8.11.12.1.13 |
||||||||||||||||||||||||||||||||||||||||||||||
|
pktSwchSnaPULlc2FrN2CountA
N2 Count
|
Integer32 | .1.3.6.1.4.1.164.8.11.12.1.14 |
||||||||||||||||||||||||||||||||||||||||||||||
|
pktSwchSnaPULlc2FrT1TimerA
T1 Timer in 1/10 of a second.
|
Integer32 | .1.3.6.1.4.1.164.8.11.12.1.15 |
||||||||||||||||||||||||||||||||||||||||||||||
|
pktSwchSnaPULlc2FrTiTimerA
TI Timer in seconds
|
Integer32 | .1.3.6.1.4.1.164.8.11.12.1.16 |
.1.3.6.1.4.1.164.8.11.13
·
1 row entry
·
32 columns
Shows link statistics for PUs running on an LLC2 link
Shows statistics for PU LLC2 Protocol Interface over Frame Relay Protocol using RFC 1490.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchSnaPULlc2FrStatNumber
Unique Identifier for this PU. The value in this field is used as a common Key in both this table and the Main PU table.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.11.13.1.1 |
||||||||||
|
pktSwchSnaPULlc2FrStatSide
Indicates for each side (SIDE-A and SIDE-B) if the Protocol Interface for that side has been defined or not.
|
Enumeration | .1.3.6.1.4.1.164.8.11.13.1.2 |
||||||||||
| pktSwchSnaPULlc2FrStatOctetsIn | SNMPv2-SMICounter32 Constraints: range: 1-10Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.13.1.3 |
||||||||||
| pktSwchSnaPULlc2FrStatOctetsOut | SNMPv2-SMICounter32 Constraints: range: 6-6Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.13.1.4 |
||||||||||
| pktSwchSnaPULlc2FrStatIFramesIn | SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.13.1.5 |
||||||||||
| pktSwchSnaPULlc2FrStatIFramesOut | SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.13.1.6 |
||||||||||
| pktSwchSnaPULlc2FrStatRRFramesIn | SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.13.1.7 |
||||||||||
| pktSwchSnaPULlc2FrStatRRFramesOut | SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.13.1.8 |
||||||||||
| pktSwchSnaPULlc2FrStatRNRFramesIn | SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.13.1.9 |
||||||||||
| pktSwchSnaPULlc2FrStatRNRFramesOut | SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.13.1.10 |
||||||||||
| pktSwchSnaPULlc2FrStatXIDsIn | SNMPv2-SMICounter32 Constraints: range: 1-10Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.13.1.11 |
||||||||||
| pktSwchSnaPULlc2FrStatXIDsOut | SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.13.1.12 |
||||||||||
| pktSwchSnaPULlc2FrStatTESTsIn | SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.13.1.13 |
||||||||||
| pktSwchSnaPULlc2FrStatTESTsOut | SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.13.1.14 |
||||||||||
| pktSwchSnaPULlc2FrStatREJsIn | SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.13.1.15 |
||||||||||
| pktSwchSnaPULlc2FrStatREJsOut | SNMPv2-SMICounter32 Constraints: range: 1-200Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.13.1.16 |
||||||||||
| pktSwchSnaPULlc2FrStatFRMRsIn | SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.13.1.17 |
||||||||||
| pktSwchSnaPULlc2FrStatFRMRsOut | SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.13.1.18 |
||||||||||
| pktSwchSnaPULlc2FrStatDISCsIn | SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.13.1.19 |
||||||||||
| pktSwchSnaPULlc2FrStatDISCsOut | SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.13.1.20 |
||||||||||
| pktSwchSnaPULlc2FrStatUAsIn | SNMPv2-SMICounter32 Constraints: range: 0-255Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.13.1.21 |
||||||||||
| pktSwchSnaPULlc2FrStatUAsOut | SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.13.1.22 |
||||||||||
| pktSwchSnaPULlc2FrStatDMsIn | SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.13.1.23 |
||||||||||
| pktSwchSnaPULlc2FrStatDMsOut | SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.13.1.24 |
||||||||||
| pktSwchSnaPULlc2FrStatSABMEsIn | SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.13.1.25 |
||||||||||
| pktSwchSnaPULlc2FrStatSABMEsOut | SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.13.1.26 |
||||||||||
| pktSwchSnaPULlc2FrStatRetransmitsIn | SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.13.1.27 |
||||||||||
| pktSwchSnaPULlc2FrStatRetransmitsOut | SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.11.13.1.28 |
||||||||||
|
pktSwchSnaPULlc2FrStatUpperState
The internal DLPI state of the connection.
|
Enumeration | .1.3.6.1.4.1.164.8.11.13.1.29 |
||||||||||
|
pktSwchSnaPULlc2FrStatLowerState
The internal Llc2Fr state of the connection.
|
Enumeration | .1.3.6.1.4.1.164.8.11.13.1.30 |
||||||||||
|
pktSwchSnaPULlc2FrStatNRMStatus
This variable indicates if the link is in Normal Response Mode or not.
|
Enumeration | .1.3.6.1.4.1.164.8.11.13.1.31 |
||||||||||
|
pktSwchSnaPULlc2FrStatFlowCtlStatus
This variable indicates the flow control status of the PU interface.
|
Enumeration | .1.3.6.1.4.1.164.8.11.13.1.32 |
pktSwchEthernetLinkTable
table.1.3.6.1.4.1.164.8.12.1
·
1 row entry
·
12 columns
The Ethernet link table defines the parameters in the PS Ethernet links.
The Ethernet Link Entry defines the contents of each link in the
Ethernet Link Table.
Ethernet Link Table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchEthernetLinkOperationMode
This parameter shows the frame handling mode on this link.
When IP mode is defined, the IP frames received on this link are handled and routed by the IP module in the PS. If IP mode is disabled, the IP fr… |
Enumerationr/w | .1.3.6.1.4.1.164.8.12.1.1.1 |
||||||||
|
pktSwchEthernetLinkUserDefMacAddr
This parameter allows the user to define a different MAC address
for this link other than the device MAC address. Possible values: 6 sets of 2 Hexadecimal digits with spaces between them (XX XX XX XX XX XX) |
OctetStringr/w Constraints: range: 1-200 |
.1.3.6.1.4.1.164.8.12.1.1.2 |
||||||||
|
pktSwchEthernetLinkPointToPointDest
Destination of the frames which are received on this link.
Possible values: X.25 PVC: Port:LCN X.25 SVC: X.25 Addr or 'cid' followed by a predefined Call ID number. Frame Relay: Port:DLCI … |
SNMPv2-TCDisplayStringr/w Enumerated Values:
Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.12.1.1.3 |
||||||||
|
pktSwchEthernetLinkTotalFramesIn
Total number of frames which were received on this link.
|
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.12.1.1.4 |
||||||||
|
pktSwchEthernetLinkTotalFramesOut
Total number of frames which were transmitted from this link.
|
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.12.1.1.5 |
||||||||
|
pktSwchEthernetLinkIpFramesIn
Number of IP frames which were received on this link.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.12.1.1.6 |
||||||||
|
pktSwchEthernetLinkIpFramesOut
Number of IP frames which were transmitted from this link.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.12.1.1.7 |
||||||||
|
pktSwchEthernetLinkLlc2FramesIn
Number of LLC2 frames which were received on this link.
|
SNMPv2-SMICounter32 Constraints: range: 1-200Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.12.1.1.8 |
||||||||
|
pktSwchEthernetLinkLlc2FramesOut
Number of LLC2 frames which were transmitted from this link.
|
SNMPv2-SMICounter32 Constraints: range: 1-3Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.12.1.1.9 |
||||||||
|
pktSwchEthernetLinkBridgFramesIn
Number of Bridged frames which were received on this link.
|
SNMPv2-SMICounter32 Constraints: range: 0-17Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.12.1.1.10 |
||||||||
|
pktSwchEthernetLinkBridgFramesOut
Number of Bridged frames which were transmitted from this link.
|
SNMPv2-SMICounter32 Constraints: range: 0-6Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.12.1.1.11 |
||||||||
|
pktSwchEthernetLinkDiscardedByFilter
Number of Bridged frames which were received on this link.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.12.1.1.12 |
.1.3.6.1.4.1.164.8.12.2
·
1 row entry
·
5 columns
The Ethernet filter table defines the frame filtering and routing through the PS Ethernet links.
The Ethernet Filter Entry defines the filtering on each Ethernet
link. The filter entry is operational only if Bridging Handling
is enabled and there is no point to point destination configured
for this link. If there i…
link. The filter entry is operational only if Bridging Handling
is enabled and there is no point to point destination configured
for this link. If there i…
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchEthernetFilterId
Identification Number of an entry in the filter table.
The ID together with the ifindex define an entry. |
Integer32 Constraints: range: 1-255 |
.1.3.6.1.4.1.164.8.12.2.1.1 |
||||||||
|
pktSwchEthernetFilterMacAddr
This parameter defines the MAC address in the current entry
of the filter table. The MAC address in the filter table is compared with the MAC address in the received frame. If the MAC address and protocol type of the fr… |
OctetStringr/w Constraints: range: 0-6 |
.1.3.6.1.4.1.164.8.12.2.1.2 |
||||||||
|
pktSwchEthernetFilterProtType
The protocol type which is compared with the protocol type
in the received frame. Each protocol in the IP frame is assigned 16 bits (see RFC1700.txt on the assignment of protocol parameters for the Internet protocol sui… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.12.2.1.3 |
||||||||
|
pktSwchEthernetFilterDest
Destination of the frames which match this current entry.
The match is in the MAC address and protocol. Possible values: X.25 PVC: Port:LCN X.25 SVC: X.25 Addr or 'cid' followed by a predefined Ca… |
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.12.2.1.4 |
||||||||
|
pktSwchEthernetFilterStatus
The status of this filter table entry.
valid - This entry was saved. createRequest - Request to create a new entry. underCreation - For a new/updated entry. invalid - Entry is deleted. |
Enumerationr/w | .1.3.6.1.4.1.164.8.12.2.1.5 |
.1.3.6.1.4.1.164.8.12.4
·
1 row entry
·
4 columns
The Ethernet Broadcast Destination table defines all the Bridging destinations of the PS. Each Broadcasted frame will be broadcasted to all these destinations.
The Ethernet Broadcast Entry defines destinations for Ethernet
bridge data.
bridge data.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
pktSwchEthernetBroadcastDestProtocol
The protocol of the Broadcasted frames.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.8.12.4.1.1 |
||||
|
pktSwchEthernetBroadcastDestId
Identification Number of an entry in the Ethernet Broadcast
Destination table. |
Integer32 Constraints: range: 0-17 |
.1.3.6.1.4.1.164.8.12.4.1.2 |
||||
|
pktSwchEthernetBroadcastDestDestination
Destination for the Ethernet frames.
Possible values for X25: X.25 PVC: Port:LCN X.25 SVC: X.25 Addr or 'cid' followed by a predefined Call ID number Possible values for fr: Frame R… |
SNMPv2-TCDisplayStringr/w Constraints: range: 0-6Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.12.4.1.3 |
||||
|
pktSwchEthernetBroadcastDestStatus
The status of this Ethernet Destination table entry.
valid - This entry was saved. createRequest - Request to create a new entry. underCreation - For a new/updated entry. invalid - Entry is deleted. |
Enumerationr/w | .1.3.6.1.4.1.164.8.12.4.1.4 |
pktSwchIpInterfaceTable
table.1.3.6.1.4.1.164.8.13.2
·
1 row entry
·
18 columns
The Ip interface table defines the Ip interfaces and their parameters in the PS device.
The IP interface Entry defines the IP configuration parameters
for each IP interface.
for each IP interface.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchIpInterfaceId
Identification Number of an entry in the IP interface table.
|
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.8.13.2.1.1 |
||||||||||||||||||||||||||||||||||||
|
pktSwchIpInterfaceAddress
The IP address of the interface. Legal input: any legal IP address.
Default value: 0.0.0.0 |
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.8.13.2.1.2 |
||||||||||||||||||||||||||||||||||||
|
pktSwchIpInterfaceAddressMask
The IP mask of the interface. Legal input: any legal IP mask:
A string of the format X.X.X.X where every X is a number in the range 0-255. Default value: 255.255.255.255 |
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.8.13.2.1.3 |
||||||||||||||||||||||||||||||||||||
|
pktSwchIpInterfaceSendDefRoutMsgOnly
Some of the RIP messages are default router messages.
These messages inform who the default router is. This MIB object allows the user to configure the device so that it will send default router messages … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.13.2.1.4 |
||||||||||||||||||||||||||||||||||||
|
pktSwchIpInterfaceDest
Destination of the packets received on this interface.
Possible values: X.25 PVC: Port:LCN X.25 SVC: X.25 Addr or 'cid' followed by a predefined Call ID number. Frame Relay: … |
SNMPv2-TCDisplayStringr/w Constraints: range: 0-255Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.8.13.2.1.5 |
||||||||||||||||||||||||||||||||||||
|
pktSwchIpInterfaceInactivity
Inactivity time in minutes before disconnecting the X25 SVC call.
Range: 0..255. Default: 2. |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.13.2.1.6 |
||||||||||||||||||||||||||||||||||||
|
pktSwchIpInterfaceLinkCost
This value will be added to the value written in the
metric field of the received frame. Range: 1..pktSwchIpGlobalMaxHopCount Default: 1. |
SNMPv2-SMIInteger32r/w Constraints: range: 0-8Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.8.13.2.1.7 |
||||||||||||||||||||||||||||||||||||
|
pktSwchIpInterfaceOptions
When netIpAddress is selected the interface IP address
will not be the IP address of the interface. It will be the IP address of the NetWork which is connected to this interface. This option is for an interface which do… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.13.2.1.8 |
||||||||||||||||||||||||||||||||||||
|
pktSwchIpInterfaceStatus
The status of this filter table entry.
valid - This entry was saved. createRequest - Request to create a new entry. underCreation - For a new/updated entry. invalid - Entry is deleted. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.13.2.1.9 |
||||||||||||||||||||||||||||||||||||
|
pktSwchIpInterfaceRxFrames
No. of frames which were received on this IP interface.
|
SNMPv2-SMICounter32 Constraints: range: 1500-4096Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.13.2.1.10 |
||||||||||||||||||||||||||||||||||||
|
pktSwchIpInterfaceRxExpiredTtl
No. of frames which were received on this IP interface
with an Expired Time to Live value. |
SNMPv2-SMICounter32 Constraints: range: 4-4Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.13.2.1.11 |
||||||||||||||||||||||||||||||||||||
|
pktSwchIpInterfaceRxUnknownDest
No. of frames which were received on this IP interface
with an unknown IP destination. No default router is configured. These frames will be discarded. |
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.13.2.1.12 |
||||||||||||||||||||||||||||||||||||
|
pktSwchIpInterfaceTxFrames
No. of frames which were Transmitted from this IP interface.
|
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.13.2.1.13 |
||||||||||||||||||||||||||||||||||||
|
pktSwchIpInterfaceTxQueueBufs
No. of buffers which are waiting in the Trasnsmit Queue.
|
SNMPv2-SMICounter32 Constraints: range: 0-255Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.13.2.1.14 |
||||||||||||||||||||||||||||||||||||
|
pktSwchIpInterfaceTxDiscarded
No. of frames which were ready to be transmitted but were
Discarded. The PS will discard frames if the transmit queue is too long. |
SNMPv2-SMICounter32 Constraints: range: 0-200Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.13.2.1.15 |
||||||||||||||||||||||||||||||||||||
|
pktSwchIpInterfaceRipRxFrames
No. of RIP frames which were received on this IP interface.
|
SNMPv2-SMICounter32 Constraints: range: 0-80Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.13.2.1.16 |
||||||||||||||||||||||||||||||||||||
|
pktSwchIpInterfaceRipTxFrames
No. of RIP Frames which were transmitted from this IP interface.
|
SNMPv2-SMICounter32 Constraints: range: 0-29Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.13.2.1.17 |
||||||||||||||||||||||||||||||||||||
|
pktSwchIpInterfaceRipWaitingMsgs
No. of RIP messages which are waiting to be transmitted to the
Network. |
SNMPv2-SMICounter32 Constraints: range: 0-29Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.13.2.1.18 |
pktSwchIsdnRoutTable
table.1.3.6.1.4.1.164.8.14.2
·
1 row entry
·
4 columns
The Isdn Routing Table entries in the Packet Switch.
Isdn Routing Entry defines the contents of each entry in the table.
The outgoing addresses are in a different table -
pktSwchIsdnRoutAddrTable. The row status in this
table will be used for both tables.
The outgoing addresses are in a different table -
pktSwchIsdnRoutAddrTable. The row status in this
table will be used for both tables.
Indexes
etRptrIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchIsdnRoutId
Number of this routing entry.
|
Integer32 | .1.3.6.1.4.1.164.8.14.2.1.1 |
||||||||||||
|
pktSwchIsdnRoutDataBandWidth
Isdn Bandwidth which will be used for the data routed via this
entry. The ISDN interface will be configured with the speed which is selected. Possible values: 2 - 56 Kbps. 3 - 64 Kbps. Default value: 3 |
Enumerationr/w Constraints: range: 1-1024 |
.1.3.6.1.4.1.164.8.14.2.1.2 |
||||||||||||
|
pktSwchIsdnRoutOptions
Special Options for this routing entry.
Possible values: 1 - No special options. 2 - Return to main link. This option is used when the current link is defined as a backup link and the main link becomes active. Defau… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.14.2.1.3 |
||||||||||||
|
pktSwchIsdnRoutStatus
The status of this routing table entry + address table
(pktSwchIsdnOutAddrTable). For creating a new entry select createRequest. A new route entry will be created together with an out address entry. There may be more th… |
Enumerationr/w Constraints: range: 0-255 |
.1.3.6.1.4.1.164.8.14.2.1.4 |
pktSwchIsdnOutAddrTable
table.1.3.6.1.4.1.164.8.14.3
·
1 row entry
·
4 columns
Outgoing ISDN addresses used by the ISDN routing table. The address table contains outgoing addresses and alternative addresses in case the connection to the first addresses does not succeed.
Isdn Outgoing Address Entry defines the contents of each entry in
the outgoing address table.
Each entry has 2 indices:
1. RoutId is the ID in the routing table.
2. AddrId is the ID containing the Outgoing address and
…
the outgoing address table.
Each entry has 2 indices:
1. RoutId is the ID in the routing table.
2. AddrId is the ID containing the Outgoing address and
…
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
pktSwchIsdnOutAddrRoutId
ID in the ISDN routing table.
|
Integer32 | .1.3.6.1.4.1.164.8.14.3.1.1 |
|
pktSwchIsdnOutAddrId
Number of the address + subaddress pair for each routing ID.
|
Integer32 | .1.3.6.1.4.1.164.8.14.3.1.2 |
|
pktSwchIsdnOutAddr
Destination ISDN Outgoing (Remote) address.
The data will be routed out to this address. Possible values: Up to 17 decimal digits. Default value: string of length 0. |
OctetStringr/w | .1.3.6.1.4.1.164.8.14.3.1.3 |
|
pktSwchIsdnOutSubAddr
Destination ISDN Outgoing (Remote) sub address.
The data will be routed out to the out addrress with this sub address. Possible values: Up to 6 decimal digits. Default value: string of length 0. |
OctetStringr/w | .1.3.6.1.4.1.164.8.14.3.1.4 |
pktSwchIsdnAcceptTable
table.1.3.6.1.4.1.164.8.14.4
·
1 row entry
·
4 columns
Table of Isdn addresses which will be accepted by the agent. If there is a dial back (answer) address, the incoming call will be disconnected and dial back will initiate. Most of the accept list parameters are in RFC2128 in the dialCtlPeerCfgTable. The parameters which are not in the the standard RFC2128 and are required, are defined here in the private PS MIB.
Isdn Accept Entry defines the contents of each entry in the table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
pktSwchIsdnAcceptId
Identifier of Accept table entry.
|
Integer32 Constraints: range: 1-3 |
.1.3.6.1.4.1.164.8.14.4.1.1 |
||||
|
pktSwchIsdnAcceptSecondaryLink
A valid Isdn link number on which the call will be accepted
when the Primary link (RFC2128.dialCtlPeerCfgLowerIf)is unavailable. Possible values: 255 - No Secondary link. or The complementary to the prima… |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.14.4.1.2 |
||||
|
pktSwchIsdnAcceptDialbkSubAddress
Isdn sub address which will be used by the agent for dialing
back. Possible values: Up to 6 decimal digits. Default value: string of length 0. |
OctetStringr/w | .1.3.6.1.4.1.164.8.14.4.1.3 |
||||
|
pktSwchIsdnAcceptStatus
The status of this accept table entry.
For creating a new entry select createRequest, For deleting an entry select invalid. For saving an entry select valid. |
Enumerationr/w | .1.3.6.1.4.1.164.8.14.4.1.4 |
pktSwchIsdnLinkTable
table.1.3.6.1.4.1.164.8.14.5
·
1 row entry
·
5 columns
Table of Isdn Link parameters. Most of the link parameters are in in RFC2127. Isdn Call statistics are RFC2128. The parameters which are not in the the standard RFCs , and are required, are defined here in the private PS MIB.
Isdn Link Entry defines the contents of each entry in the table.
Indexes
mplsIngressTunnelIndex
| Column | Syntax | OID |
|---|---|---|
|
pktSwchIsdnLinkBchannel
Defines which B channels are used for Leased Lines Only.
Default value: noBchannel(1). |
Enumerationr/w | .1.3.6.1.4.1.164.8.14.5.1.1 |
|
pktSwchIsdnCallsClrs
Number of calls on this link which were cleared since the link was
activated. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.8.14.5.1.2 |
|
pktSwchIsdnTestCmd
Activate/Stop an ISDN test on the current ISDN link.
In order to Activate the test, set the TestCmd to 3 (activate). For stopping the test, set the TestCmd to 2 (noOp). Important: In order for the test to… |
Enumerationr/w | .1.3.6.1.4.1.164.8.14.5.1.3 |
|
pktSwchIsdnTestAddr
Destination ISDN Outgoing (Remote) address which will be
called in order to test the ISDN. Possible values: Up to 17 decimal digits. Default value: string of length 0. Important: In order for the test to … |
OctetStringr/w | .1.3.6.1.4.1.164.8.14.5.1.4 |
|
pktSwchIsdnTestSubAddr
Destination ISDN Outgoing (Remote) address which will be
called in order to test the ISDN. Possible values: Up to 6 decimal digits. Default value: string of length 0. Important: In order for the test to s… |
OctetStringr/w | .1.3.6.1.4.1.164.8.14.5.1.5 |
pktSwchPppSecretsTable
table.1.3.6.1.4.1.164.8.15.1
·
1 row entry
·
2 columns
Table of PPP Secret parameters. The parameters are defined in rfc1472 except for the ROW status which is defined here. In the standard, there is no create request option, so in order to be consistent with other ROW statuses in the Packet Switches it is defined here.
PPP Secrets Entry defines the contents of each entry in the table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
pktSwchPppSecretsPairId
Index of the Secrets Pair.
|
Integer32 | .1.3.6.1.4.1.164.8.15.1.1.1 |
|
pktSwchPppSecretsStatus
The status of the PPP Secrets table.
For creating a new entry select createRequest, For deleting an entry select invalid. For saving an entry select valid. |
Enumerationr/w | .1.3.6.1.4.1.164.8.15.1.1.2 |
pktSwchPppChanTable
table.1.3.6.1.4.1.164.8.15.2
·
1 row entry
·
15 columns
Table of PPP Channel parameters. The table can be used for Async as well as Sync parameters. In case a parameter is irrelevant for Async or Sync a <not applicable> value may be returned. Statistics Parameters are already defined in rfc1213: ifInUcastPkts, ifOutUcastPkts, ifInErrors, ifOutErrors
PPP Channel Entry defines the contents of each entry in the table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
pktSwchPppChanSpeed
The port's speed in bits per second.
For Async channels: Default value: 14 . For Sync Links: Use not_applicable(255) The Sync Links have an internal clock with different values. |
Enumerationr/w | .1.3.6.1.4.1.164.8.15.2.1.1 |
||||||||
|
pktSwchPppChanFlowCtlDuration
Hardware Flow Control Duration.
1..254 - Duration (in 50ms intervals). when timer expires, flow control stops. 0 - No Hardware flow control. 255 - Continuous Flow Control. Default value: 0. For Sync Lin… |
Integer32r/w | .1.3.6.1.4.1.164.8.15.2.1.2 |
||||||||
|
pktSwchPppChanStopBits
This entry indicates the number of stop bits per character.
The options are either (1) one stop bit, (2) two stop bits, or (3) 1.5 stop bits. For Sync Links: notApplicable(255). |
Enumerationr/w | .1.3.6.1.4.1.164.8.15.2.1.3 |
||||||||
|
pktSwchPppChanBitPerChar
The number of data bits per character supported by the ppp
link. Legal values for Async channels: 5..8 . For Sync Links: 0 |
Integer32r/w | .1.3.6.1.4.1.164.8.15.2.1.4 |
||||||||
|
pktSwchPppChanParity
This entry selects the type of parity to be checked or
generated. The options are (1) space parity, (2) mark parity, (3) even parity, (4) odd parity, or (255) no parity. For Sync Links: none(255). |
Enumerationr/w | .1.3.6.1.4.1.164.8.15.2.1.5 |
||||||||
|
pktSwchPppChanNegotiationTrigger
The trigger which is used in order to start the Negotiation.
The HW signals which are used are: DCD (Data Carrier Detect) - issued by DCE DSR (Data Set Ready) - issued by DCE DTR (Data Terminal Ready) - issued b… |
Enumerationr/w | .1.3.6.1.4.1.164.8.15.2.1.6 |
||||||||
|
pktSwchPppChanMRU
Maximum Receive Unit.
Size of the packet which is negotiated with the connected device. Default value: 1500 . |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.15.2.1.7 |
||||||||
|
pktSwchPppChanACCM
Async Control Character Map -
The ACCM value serves as a mask for the first 32 characters in the ASCII table. Control characters may cause problems when they are transferred on the network. This can be ha… |
OctetStringr/w | .1.3.6.1.4.1.164.8.15.2.1.8 |
||||||||
|
pktSwchPppChanAuthentication
Port Authentication Type.
1 - No Authentication: User side Only. 2 - Configuration of the Host side. PAP (Password Authentication Protocol) or CHAP (Challenge Handshake Authentication Protocol) will be accep… |
Enumerationr/w | .1.3.6.1.4.1.164.8.15.2.1.9 |
||||||||
|
pktSwchPppChanInternalClock
The internal clock rate of the MLPPP Link.
Default value: 9. For Async channels: return 255. |
Enumerationr/w | .1.3.6.1.4.1.164.8.15.2.1.10 |
||||||||
|
pktSwchPppChanBundle
Bundle Number.
It is possible to attach a few channels/links to a bundle. If the User enters a non existing bundle number, the PS will create a new bundle with this number. The bundle number may be: 1..255 If the bundle… |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.8.15.2.1.11 |
||||||||
|
pktSwchpPppChanIsdnRoutId
ISDN destination. ID (1..200) in the ISDN routing table containing
the outgoing ISDN address for this channel/link. For no destination: 0 Default value: 0 |
Integer32r/w | .1.3.6.1.4.1.164.8.15.2.1.12 |
||||||||
|
pktSwchpPppChanLastEvent
Status showing the last PPP event which occured on the line
described in an ascii string. Examples: 1. Received Configuration Request. 2. Sent Protocol Reject. 3. Error: Can Not Compress Frame. Default: 0… |
OctetString | .1.3.6.1.4.1.164.8.15.2.1.13 |
||||||||
|
pktSwchpPppChanModemInitString
This string is needed by the modem in order to be initiated,
before dialing. |
OctetStringr/w | .1.3.6.1.4.1.164.8.15.2.1.14 |
||||||||
|
pktSwchpPppChanModemDialString
This string enables the modem to open a new call.
|
OctetStringr/w | .1.3.6.1.4.1.164.8.15.2.1.15 |
etRptrTable
table.1.3.6.1.4.1.164.9.1
·
1 row entry
·
9 columns
This table contains repeater data specific to the etRptrIndex.
An entry in table etRptrTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
etRptrIndex
The Repeater Id, this table data refer to.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.9.1.1.1 |
||||
|
etRptrGroupCapacity
The etRptrGroupCapacity is the number of groups
that can be contained within the repeater. Within each managed repeater, the groups are uniquely numbered in the range from 1 to etRptrGroupCapacity. Some … |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.9.1.1.2 |
||||
|
etRptrOperStatus
The etRptrOperStatus object indicates the
operational state of the repeater. The etRptrHealthText object may be consulted for more specific information about the state of the repeater's health. In the case of multiple … |
Enumeration | .1.3.6.1.4.1.164.9.1.1.3 |
||||
|
etRptrHealthText
The health text object is a text string that
provides information relevant to the operational state of the repeater. Agents may use this string to provide detailed information on current failures, including how they we… |
OctetString | .1.3.6.1.4.1.164.9.1.1.4 |
||||
|
etRptrReset
Setting this object to reset(2) causes a
transition to the START state of Fig 9-2 in section 9 [IEEE 802.3 Std]. Setting this object to noReset(1) has no effect. The agent will always return the value noR… |
Enumerationr/w | .1.3.6.1.4.1.164.9.1.1.5 |
||||
|
etRptrNonDisruptTest
Setting this object to selfTest(2) causes the
repeater to perform a agent-specific, non- disruptive self-test that has the following characteristics: a) The nature of the tests is not specified. b) The test does not c… |
Enumerationr/w | .1.3.6.1.4.1.164.9.1.1.6 |
||||
|
etRptrTotalPartitionedPorts
This object returns the total number of ports in
the repeater whose current state meets all three of the following criteria: etRptrPortOperStatus does not have the value notPresent(3), etRptrPortAdminStatus is enabled(… |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.9.1.1.7 |
||||
|
etRptrMdlVector
This object returns a vector mapping the location of the repeater modules
to their corresponding bit position. A bit that is set indicates an existing module |
SNMPv2-SMIInteger32r/w Constraints: range: 1-65535Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.9.1.1.8 |
||||
|
etRptrMonitorTransmitCollisions
This counter is incremented every time the
repeater state machine enters the TRANSMIT COLLISION state from any state other than ONE PORT LEFT (Ref: Fig 9-2, IEEE 802.3 Std). The approximate minimum time f… |
SNMPv2-SMICounter32 Constraints: range: 0-65535Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.9.1.1.9 |
etRptrSecTable
table.1.3.6.1.4.1.164.9.2
·
1 row entry
·
5 columns
Repeater Security Table
An entry in table etRptrSecTable.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
etRptrId
The Repeater Id, this table data refer to.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.9.2.1.1 |
|
etRptrSecID
Segment's security unique identification number
|
Integer32 | .1.3.6.1.4.1.164.9.2.1.2 |
|
etRptrSecEnable
This entry indicates whether the specific segment's security is active or not
|
Enumerationr/w | .1.3.6.1.4.1.164.9.2.1.3 |
|
etRptrSecPattern
A six-octet(48 bit) pattern: where the masked bits of etRptrSecMask
need to match the MAC address of each port within the segment.Value of all zeros indicates no security. |
OctetStringr/w | .1.3.6.1.4.1.164.9.2.1.4 |
|
etRptrSecMask
Mask of the allowed MAC address that can be connected through
the ports within the segment |
OctetStringr/w | .1.3.6.1.4.1.164.9.2.1.5 |
mplsIngressTunnelTable
table.1.3.6.1.4.1.164.10.1.6
·
1 row entry
·
11 columns
The mpls Ingress Tunnel Table
An entry in this table represents an MPLS tunnel.
An entry can be created by a network administrator
or by an SNMP agent as instructed by an MPLS
signaling protocol.
An entry can be created by a network administrator
or by an SNMP agent as instructed by an MPLS
signaling protocol.
Indexes
rtrIfCfgIndex rtrIfCfgIpAddress
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
mplsIngressTunnelIndex
Ingress Tunnel index.
|
MPLS-TC-STD-MIBMplsTunnelIndex Textual Convention: MPLS-TC-STD-MIBMplsTunnelIndex Unsigned32Type Constraints: range: 0..65535 |
.1.3.6.1.4.1.164.10.1.6.1.1 |
||||||||||||||
|
mplsIngressTunnelName
The name assigned to the ingress tunnel.
|
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.10.1.6.1.2 |
||||||||||||||
|
mplsIngressTunnelOwner
Denotes the entity (or protocol) that created and is responsible
for managing this tunnel. |
MPLS-TC-STD-MIBMplsOwnerr/w Textual Convention: MPLS-TC-STD-MIBMplsOwner EnumerationType Values:
|
.1.3.6.1.4.1.164.10.1.6.1.3 |
||||||||||||||
|
mplsIngressTunnelAttachedInterface
The incoming interface leads
to a predefined ifindex based on connection type. |
IF-MIBInterfaceIndexOrZeror/w Textual Convention: IF-MIBInterfaceIndexOrZero Integer32Type Constraints: range: 0..2147483647 |
.1.3.6.1.4.1.164.10.1.6.1.4 |
||||||||||||||
|
mplsIngressTunnelNumberOfLabels
The number of tunnel labels that should be received
on this ingress tunnel. This number does not include the pW label |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.10.1.6.1.5 |
||||||||||||||
|
mplsIngressTunnelAdminStatus
Indicates the desired operational status of this
tunnel. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.10.1.6.1.6 |
||||||||||||||
|
mplsIngressTunnelOuterLabel
The Label that is 'closer' to the network encapsulation.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.10.1.6.1.7 |
||||||||||||||
|
mplsIngressTunnelInnerLabel
The Label that is 'closer' to the user payload.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.10.1.6.1.8 |
||||||||||||||
|
mplsIngressTunnelRowStatus
Object used for creating, modifying, and deleting
a row of this table |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.10.1.6.1.9 |
||||||||||||||
|
mplsIngressTunnelPWCounter
The number of Pseudo Wires that use the ingress tunnel.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.10.1.6.1.10 |
||||||||||||||
|
mplsIngressTunnelOperStatus
Indicates the operational status of this ingress tunnel.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.10.1.6.1.11 |
mplsEgressTunnelTable
table.1.3.6.1.4.1.164.10.1.8
·
1 row entry
·
17 columns
The mpls Egress Tunnel Table
An entry in this table represents an MPLS tunnel.
An entry can be created by a network administrator
or by an SNMP agent as instructed by an MPLS
signalling protocol.
An entry can be created by a network administrator
or by an SNMP agent as instructed by an MPLS
signalling protocol.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
mplsEgressTunnelIndex
Egress Tunnel index .
|
MPLS-TC-STD-MIBMplsTunnelIndex Enumerated Values:
Textual Convention: MPLS-TC-STD-MIBMplsTunnelIndex Unsigned32Type Constraints: range: 0..65535 |
.1.3.6.1.4.1.164.10.1.8.1.1 |
||||||||||||||||||||
|
mplsEgressTunnelName
The name assigned to the egress tunnel.
|
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Enumerated Values:
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.10.1.8.1.2 |
||||||||||||||||||||
|
mplsEgressTunnelOwner
Denotes the entity (or protocol) that created and is responsible
for managing this tunnel. |
MPLS-TC-STD-MIBMplsOwnerr/w Enumerated Values:
Textual Convention: MPLS-TC-STD-MIBMplsOwner EnumerationType Values:
|
.1.3.6.1.4.1.164.10.1.8.1.3 |
||||||||||||||||||||
|
mplsEgressTunnelAttachedInterface
The outgoing interface leads
to a predefined ifindex based on connection type. |
IF-MIBInterfaceIndexOrZeror/w Textual Convention: IF-MIBInterfaceIndexOrZero Integer32Type Constraints: range: 0..2147483647 |
.1.3.6.1.4.1.164.10.1.8.1.4 |
||||||||||||||||||||
|
mplsEgressTunnelNextHopType
Indicates address type of the Next Hop.
Not applicable for device with router. |
Enumerationr/w | .1.3.6.1.4.1.164.10.1.8.1.5 |
||||||||||||||||||||
|
mplsEgressTunnelNextHop
Not applicable (=0) when mplsEgressTunnelNextHopType=notApplicable.
When applicable, represents ATM VC, Bridge Port, according to mplsEgressTunnelNextHopType. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.10.1.8.1.6 |
||||||||||||||||||||
|
mplsEgressTunnelIpNextHop
Applicable only when mplsEgressTunnelNextHopType =ipV4.
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.10.1.8.1.7 |
||||||||||||||||||||
|
mplsEgressTunnelNumberOfLabels
Number of Tunnel Labels that should be transmitted
on this egress LSP (Labeled-Switched Path). This number of labels does not include the PW number. Valid values 0 - no label, 1, 2 |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.10.1.8.1.8 |
||||||||||||||||||||
|
mplsEgressTunnelAdminStatus
Indicates the desired operational status of this
egress tunnel. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.10.1.8.1.9 |
||||||||||||||||||||
|
mplsEgressTunnelOuterLabel
The Label that is 'closer' to the network encapsulation.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.10.1.8.1.10 |
||||||||||||||||||||
|
mplsEgressTunnelInnerLabel
The Label that is 'closer' to the user payload.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.10.1.8.1.11 |
||||||||||||||||||||
|
mplsEgressTunnelRowStatus
Object used for creating, modifying, and deleting
a row of this table |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.10.1.8.1.12 |
||||||||||||||||||||
|
mplsEgressTunnelPWCounter
The number of Pseudo Wires that use the egress tunnel.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.10.1.8.1.13 |
||||||||||||||||||||
|
mplsEgressTunnelPeerIdx
Represents the Index of the Peer (as it is defined in the Peer Table),
for which this egress tunnel should be established. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.10.1.8.1.14 |
||||||||||||||||||||
|
mplsEgressTunnelExpBitsMode
Indicates the EXP Bits Mode of this egress tunnel:
copyFromPw(2)- EXP Bits of this tunnel are copied from the EXP bits of the PW, as configured for the PW. static(3) - EXP Bits value… |
Enumerationr/w | .1.3.6.1.4.1.164.10.1.8.1.15 |
||||||||||||||||||||
|
mplsEgressTunnelExpBits
Indicates the EXP Bits of this egress tunnel.
Relevant only when EXP Bits Mode is 'static(3)'. |
SNMPv2-SMIUnsigned32r/w Constraints: range: 4-1800Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.10.1.8.1.16 |
||||||||||||||||||||
|
mplsEgressTunnelOperStatus
Indicates the operational status of this egress tunnel.
|
Enumeration Constraints: range: 3-1800 |
.1.3.6.1.4.1.164.10.1.8.1.17 |
radMplsLdpEntityTable
table.1.3.6.1.4.1.164.10.2.1.1
·
1 row entry
·
6 columns
This table contains information about the MPLS Label Distribution Protocol Entities which exist on this Label Switching Router (LSR) or Label Edge Router (LER).
An entry in this table represents an LDP entity.
An entry can be created by a network administrator
or by an SNMP agent as instructed by LDP.
An entry can be created by a network administrator
or by an SNMP agent as instructed by LDP.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
radMplsLdpEntityLdpId
The LDP identifier.
When irrelevant, value = (2^48)-1 (all ones in all 6 octets). |
MPLS-TC-STD-MIBMplsLdpIdentifier Textual Convention: MPLS-TC-STD-MIBMplsLdpIdentifier OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.10.2.1.1.1.1 |
||||||||||||
|
radMplsLdpEntityIndex
This index is used as a secondary index to uniquely
identify this row. A secondary index (this object) is meaningful to some but not all, LDP implementations. For example an LDP implementation which uses… |
DIFFSERV-MIBIndexInteger Textual Convention: DIFFSERV-MIBIndexInteger Unsigned32Type Constraints: range: 1..4294967295 |
.1.3.6.1.4.1.164.10.2.1.1.1.2 |
||||||||||||
|
radMplsLdpEntityAdminStatus
The administrative status of this LDP Entity.
If this object is changed from 'enable' to 'disable' and this entity has already attempted to establish contact with a Peer, then all contact with that Peer is lost and all … |
Enumerationr/w | .1.3.6.1.4.1.164.10.2.1.1.1.4 |
||||||||||||
|
radMplsLdpEntityKeepAliveHoldTimer
The 16-bit integer value which is the proposed keep
alive hold timer for this LDP Entity. |
secondsUnsigned32r/w | .1.3.6.1.4.1.164.10.2.1.1.1.9 |
||||||||||||
|
radMplsLdpEntityHelloHoldTimer
The 16-bit integer value which is the proposed Hello
hold timer for this LDP Entity. The Hello Hold time in seconds. An LSR maintains a record of Hellos received from potential peers. This object represe… |
secondsUnsigned32r/w | .1.3.6.1.4.1.164.10.2.1.1.1.10 |
||||||||||||
|
radMplsLdpEntityRowStatus
The status of this conceptual row. All writable
objects in this row may be modified at any time, however, as described in detail in the section entitled, 'Changing Values After Session Establishment', and again describ… |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.10.2.1.1.1.23 |
rtrConfigIfTable
table.1.3.6.1.4.1.164.11.1.1
·
1 row entry
·
4 columns
Table of configured interfaces.
Each entry defines a configured interface.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
rtrConfigIfIndex
This variable uniquely identifies the interface.
It is used as a cross reference in other system tables |
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.164.11.1.1.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
rtrConfigIfType
This variable identifies the type of the specific
entry in the rtrDynamicIfConfigTable. This field is writable only at creation time (i.e., when value of status is underCreation). |
RtrIfConfigTYPEr/w Textual Convention: ACE2002-MIBRtrIfConfigTYPE EnumerationType Values:
|
.1.3.6.1.4.1.164.11.1.1.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
rtrConfigIfName
This variable provides a logical name to a specific entry in
rtrConfigIfTable. It is also used in identifying the Driver interfaces. |
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.11.1.1.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
rtrConfigIfStatus
The status of the ConfigEntry. The choices are those
defined in SNMPv2-TC. Only: active, createAndWait, and destroy will be used. active - The conceptual row is available for use by the managed device. createAndWait -… |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.11.1.1.1.4 |
rtrIfCfgTable
table.1.3.6.1.4.1.164.11.1.2
·
1 row entry
·
16 columns
Router Interface Configuration Table.
An entry in the Router Interface Configuration Table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
rtrIfCfgIndex
This object indicates the Router Interface Index.
(In some cases it will be equal to the Router Interface ifIndex). |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.1.2.1.1 |
||||||||||||||||||||||
|
rtrIfCfgIpAddress
IP Address of the Router Interface.
|
RFC1155-SMIIpAddress Enumerated Values:
Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.1.2.1.2 |
||||||||||||||||||||||
|
rtrIfCfgRowStatus
This object enables the user to
create/delete entries of this table. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.11.1.2.1.3 |
||||||||||||||||||||||
|
rtrIfCfgIpMask
IP Mask Address Router Interface.
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.1.2.1.4 |
||||||||||||||||||||||
|
rtrIfCfgIfIndex
ifIndex of the device interface connected
to this Router Interface. |
SNMPv2-SMIInteger32r/w Constraints: range: 1-30Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.1.2.1.5 |
||||||||||||||||||||||
|
rtrIfCfgType
The Router Interface Type.
atm - ATM router interface lis - Logical IP Subnet router interface. ethernet - Ethernet router interface. |
Enumerationr/w | .1.3.6.1.4.1.164.11.1.2.1.6 |
||||||||||||||||||||||
|
rtrIfCfgVlanId
The VLAN ID assigned to Tagged frames transmitted
from this Router Interface. The value inserted should be a defined VLAN. |
Q-BRIDGE-MIBVlanIndexr/w Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32 |
.1.3.6.1.4.1.164.11.1.2.1.7 |
||||||||||||||||||||||
|
rtrIfCfgMtu
The size of the largest packet which can be sent/received
on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that ca… |
SNMPv2-SMIInteger32r/w Constraints: range: 0-65535Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.1.2.1.8 |
||||||||||||||||||||||
|
rtrIfCfgName
The Router Interface Name.
|
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Constraints: range: 0-65535Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.11.1.2.1.9 |
||||||||||||||||||||||
|
rtrIfCfgConnectionPointer
This parameter represents the entity that is connected
to this Router Interface. The value of this parameter is a pointer to an existing row of a table, where the entity connected to this Router Int… |
SNMPv2-TCRowPointerr/w Textual Convention: SNMPv2-TCRowPointer ObjectIdentifier |
.1.3.6.1.4.1.164.11.1.2.1.10 |
||||||||||||||||||||||
|
rtrIfCfgVlanTagging
The VLAN Tagging.
|
Enumerationr/w | .1.3.6.1.4.1.164.11.1.2.1.11 |
||||||||||||||||||||||
|
rtrIfCfgVlanPriority
The VLAN Priority.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.11.1.2.1.12 |
||||||||||||||||||||||
|
rtrIfCfgParams
This object represents one or more parameters of the Router Interface.
Each group of bits (one or more bits) represents a specific parameter and its possible values. This object's mapping and interpretation will be spec… |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.11.1.2.1.13 |
||||||||||||||||||||||
|
rtrIfCfgMngAccess
This object represents whether Management Access is enabled
via this Router Interface. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.11.1.2.1.14 |
||||||||||||||||||||||
|
rtrIfCfgLlcSnapEncaps
This object represents the LLC/SNAP Encapsulation.
|
Enumerationr/w | .1.3.6.1.4.1.164.11.1.2.1.15 |
||||||||||||||||||||||
|
rtrIfCfgDhcp
This object indicates whether DHCP is enabled for this Router Interface.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.11.1.2.1.16 |
rtrIpAddrTable
table.1.3.6.1.4.1.164.11.2.1
·
1 row entry
·
6 columns
This table is parralel to MIB II IpAddrTable, and is used to add/delete entries to/from that table. In addition it contains private objects.
The addressing information for one of this
entity's IP addresses.
entity's IP addresses.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
rtrIpAdEntAddr
The IP address to which this entry's addressing
information pertains. |
RFC1155-SMIIpAddress Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.2.1.1.1 |
||||||||||||
|
rtrIpAdEntIfIndex
The index value which uniquely identifies the
interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.2.1.1.2 |
||||||||||||
|
rtrIpAdEntNetMask
The subnet mask associated with the IP address of
this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0. |
RFC1155-SMIIpAddressr/w Enumerated Values:
Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.2.1.1.3 |
||||||||||||
|
rtrIpAdEntForwardIpBroadcast
This variable controls forwarding of IP (sub)net-directed
broadcasts destined for an attached sub(net). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.11.2.1.1.4 |
||||||||||||
| rtrIpAdEntBackupAddr | RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.2.1.1.5 |
||||||||||||
|
rtrIpAdEntStatus
The Status variable is used to create and destroy a Ip Addresses.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.11.2.1.1.6 |
rtrIcmpRdTable
table.1.3.6.1.4.1.164.11.2.2.2
·
1 row entry
·
8 columns
This table contains ICMP Router Discovery parameters configurated per IP interface.
The ICMP parameters configurated for IP interface.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
rtrIcmpRdIpAddr
The IP address to which this entry's information pertains.
|
RFC1155-SMIIpAddress Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.2.2.2.1.1 |
||||||||||||||||||
|
rtrIcmpRdIpAdvertAddr
The IP destination address to be used for multicast
Router Advertisements sent from the interface. The only permissible values are the all-systems multicast address, 224.0.0.1, or the limited-broadcast address, 255.255.… |
RFC1155-SMIIpAddressr/w Enumerated Values:
Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.2.2.2.1.2 |
||||||||||||||||||
|
rtrIcmpRdMaxAdvertInterval
The maximum time allowed between sending multicast
Router Advertisements from the interface, in seconds. Must be no less than 4 seconds and no greater than 1800 seconds. |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.11.2.2.2.1.3 |
||||||||||||||||||
|
rtrIcmpRdMinAdvertInterval
The minimum time allowed between sending unsolicited
multicast Router Advertisements from the interface, in seconds. Must be no less than 3 seconds and no greater than rtrIcmpRdMaxAdvertInterval. Default: 0.75 * rtrIcm… |
Integer32r/w | .1.3.6.1.4.1.164.11.2.2.2.1.4 |
||||||||||||||||||
|
rtrIcmpRdAdvertLifetime
The maximum length of time that the advertised addresses
are to be considered as valid. Must be no less than rtrIcmpRdMaxAdvertInterval and no greater than 9000 seconds. Default: 3 * rtrIcmpRdMaxAdvertInterval. |
Integer32r/w | .1.3.6.1.4.1.164.11.2.2.2.1.5 |
||||||||||||||||||
|
rtrIcmpRdAdvertise
A flag indicating whether or not the address is to be
advertised. |
Enumerationr/w | .1.3.6.1.4.1.164.11.2.2.2.1.6 |
||||||||||||||||||
|
rtrIcmpRdPreferenceLevel
The preferability of the address as a default router
address, relative to other router addresses on the same subnet. |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.2.2.2.1.7 |
||||||||||||||||||
|
rtrIcmpRdEntStatus
Setting of any value to this object set values of
all fields to the default values. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.2.2.2.1.8 |
rtrRip2IfConfTable
table.1.3.6.1.4.1.164.11.2.3.1
·
1 row entry
·
4 columns
This table is an extension of rip2IfConfTable (RFC 1724 ,RIP 2). It means that every time somebody creates/destroys a row in the rip2IfConfTable, the same row should be automatically created/destroyed in this table.
An entry in table rtrRip2IfConfTable.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
rtrRip2IfConfAddress
The IP Address of this system on the indicated subnet.
For unnumbered interfaces, the value 0.0.0.N, where the least significant 24 bits (N) is the ifIndex for the IP Interface in network byte order |
RFC1155-SMIIpAddress Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.2.3.1.1.1 |
|
rtrRip2IfConfVirtualDis
deprecated
This variable defines the virtual number of hops assigned to
the interface specified by rtrIfIpAddrIndex. This enables fine-tuning of the RIP routing algorithm. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.2.3.1.1.2 |
|
rtrRip2IfConfAutoSend
deprecated
When set to enable only the default route is sent through
the interface. When set to disable, regular RIPs are sent. |
Enumerationr/w | .1.3.6.1.4.1.164.11.2.3.1.1.3 |
|
rtrRip2IfConfRipEnable
This object shows whether RIP Protocol is enabled on the current interface.
|
Enumerationr/w | .1.3.6.1.4.1.164.11.2.3.1.1.4 |
rtrNatIfConfTable
table.1.3.6.1.4.1.164.11.2.5.1
·
1 row entry
·
6 columns
A list of interfaces which require separate NAT configuration.
A single routing domain in a single subnet.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
rtrNatIfVirtualAddress
The IP Address of the virtual subnet to be translated by the 'NAT box'
attached to this interface. For some devices/cases, it might represent the Virtual Lowest IP Address. |
RFC1155-SMIIpAddress Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.2.5.1.1.1 |
||||||||||||
|
rtrNatIfVirtualMask
The subnet Mask of the virtual subnet.
For some devices/cases, it might represent the Virtual Highest IP Address. |
RFC1155-SMIIpAddress Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.2.5.1.1.2 |
||||||||||||
|
rtrNatIfConfStatus
Writing 'destroy' has the effect of deleting this interface.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.11.2.5.1.1.3 |
||||||||||||
|
rtrNatIfRealAddress
The IP Address of the real subnet which is used by 'NAT box' for translation.
For some devices/cases, it might represent the Real Lowest IP Address. |
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.2.5.1.1.4 |
||||||||||||
|
rtrNatIfRealMask
The subnet Mask of the real subnet.
For some devices/cases, it might represent the Real Highest IP Address. |
RFC1155-SMIIpAddressr/w Enumerated Values:
Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.2.5.1.1.5 |
||||||||||||
|
rtrNatIfType
NAT type.
static - Translate a specific virtual IP network to a specific real IP network. TCP, UDP and ICMP sessions originated both in real and virtual networks will be translated. d… |
Enumerationr/w | .1.3.6.1.4.1.164.11.2.5.1.1.6 |
rtrPatTable
table.1.3.6.1.4.1.164.11.2.5.2
·
1 row entry
·
7 columns
Port Address Translation (PAT - single IP NAT) configuration Table.
Each entry describe unique mapping between real IP address,
range of ports and protocol, to local (virtual) IP address.
Ports are used in the TCP (rfc793) to name the ends of logical
connections which carry long term c…
range of ports and protocol, to local (virtual) IP address.
Ports are used in the TCP (rfc793) to name the ends of logical
connections which carry long term c…
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
rtrPatIdx
Running index for PAT table.
|
Integer32 | .1.3.6.1.4.1.164.11.2.5.2.1.1 |
||||||||||||
|
rtrPatRealAddress
The real IP Address used for translation
|
RFC1155-SMIIpAddressr/w Constraints: range: 1-50Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.2.5.2.1.2 |
||||||||||||
|
rtrPatVirtualAddress
The virtual IP Address used for translation
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.2.5.2.1.3 |
||||||||||||
|
rtrPatLowestPort
Lowest Port number for this PAT entry
|
Integer32r/w | .1.3.6.1.4.1.164.11.2.5.2.1.4 |
||||||||||||
|
rtrPatHighestPort
Highest Port number for this PAT entry
|
Integer32r/w | .1.3.6.1.4.1.164.11.2.5.2.1.5 |
||||||||||||
|
rtrPatProtocol
Protocol selected.
This Protocol and port range (lowest port - highest port) define the application (FTP, Telnet, SMTP etc.). Protocol enumaration numbers correspond to IP header 'protocol' field (e.g. 6 means TCP, 17 … |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.2.5.2.1.6 |
||||||||||||
|
rtrPatStatus
This object enables creating and deleting
entries of the table. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.11.2.5.2.1.7 |
rtrFACSActTable
table.1.3.6.1.4.1.164.11.5.2
·
1 row entry
·
4 columns
The table of FACS action.
Each rtrFACSActEntry consist of the following parameters
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
rtrFACSActType
This parameter indicates on which FACS Table the FACS
action will preform. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.11.5.2.1.1 |
||||
|
rtrFACSActIfIndex
The interface to which this FACS entry is applicable.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.5.2.1.2 |
||||
|
rtrFACSAction
The management station that sends a SET request for one of these actions
with indexes rtrFACSType and rtrFACSIfIndex defines the type and the interface Id for which all FACS statements are to be erased. If no interfa… |
Enumerationr/w | .1.3.6.1.4.1.164.11.5.2.1.3 |
||||
|
rtrFACSActiveDB
This parameter will point on which Facs DataBase the SNMP agent
read. The Active dataBase is Read Only. The user may change FACS statements in the temporary DataBase and then write it to the Active DB. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.11.5.2.1.4 |
rtrFACSTable
table.1.3.6.1.4.1.164.11.5.3
·
1 row entry
·
14 columns
The table of FACS statment.
Each FACS statment consists of the following parameters
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
rtrFACSIfIndex
The interface to which this FACS entry is applicable.
For applications this variables is always 0. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.5.3.1.1 |
||||
|
rtrFACSProtocolType
This parameter define the protocol the Security Access Control
is applicable. |
Enumeration | .1.3.6.1.4.1.164.11.5.3.1.2 |
||||
|
rtrFACSType
The Mode of in which this FACS statement operates.
For applications this variable is always rx(2). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.11.5.3.1.3 |
||||
|
rtrFACSIndex
Index to the FACS Table.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.5.3.1.4 |
||||
|
rtrFACSSrcAdd
The size of the octet string will be according to the protocol type
defined in rtrFACSProtocolType. |
OctetStringr/w | .1.3.6.1.4.1.164.11.5.3.1.5 |
||||
|
rtrFACSSrcAddMask
Source-address mask .
|
OctetStringr/w | .1.3.6.1.4.1.164.11.5.3.1.6 |
||||
|
rtrFACSDesAdd
Destination-address The size of the octet string will be according to the
protocol type define in rtrFACSProtocolType . |
OctetStringr/w | .1.3.6.1.4.1.164.11.5.3.1.7 |
||||
|
rtrFACSDesAddMask
Destination-address mask .
|
OctetStringr/w | .1.3.6.1.4.1.164.11.5.3.1.8 |
||||
|
rtrFACSOperation
... .
|
Enumerationr/w | .1.3.6.1.4.1.164.11.5.3.1.9 |
||||
|
rtrFACSNetFiltering
... .
|
Enumerationr/w | .1.3.6.1.4.1.164.11.5.3.1.10 |
||||
|
rtrFACSSocketNum
Port/socket number for different applications
0 is default meaning not applicable. none(1), ftp(21), telnet(23), smtp(25), tftp(69), snmp(161), snmpTrap(162), rip(520), sapIPX(1106), ripIPX(1107) |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.5.3.1.11 |
||||
|
rtrFACSMask1Id
Index into RND mask table FACS/COD Type) .
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.5.3.1.12 |
||||
|
rtrFACSMask2Id
Index into RND mask table FACS/COD according to
the value of rtrFACSType . |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.5.3.1.13 |
||||
|
rtrFACSStatus
The status of a table entry.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.11.5.3.1.14 |
rtrBridgePortConfigTable
table.1.3.6.1.4.1.164.11.7.1
·
1 row entry
·
3 columns
Table of the bridge ports
Each entry defines a bridge port
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
rtrBridgePortCIndex
This is the index of the bridge port. It is the same
as 'dot1dBasePort' of the Bridge MIB. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.7.1.1.1 |
||||||||||||
|
rtrBridgePortCIf
The config ifIndex the bridge port is sitting on.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.7.1.1.2 |
||||||||||||
|
rtrBridgePortCStatus
The status of the RtrBridgePortConfigEntry.
Creating and destroying the bridge port is done by this variable. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.11.7.1.1.3 |
wrDhcpTable
table.1.3.6.1.4.1.164.11.7.2.2.1.2
·
1 row entry
·
12 columns
A list of DHCP entries. The number of entries is up to DHCP current entries, according to the WEBRANger model.
DHCP parameters per entry of the DHCP table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
wrDhcpLowIpAddress
DHCP Low Ip Address.
|
RFC1155-SMIIpAddress Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.7.2.2.1.2.1.1 |
||||||||||||||||
|
wrDhcpHighIpAddress
DHCP High Ip Address.
|
RFC1155-SMIIpAddressr/w Enumerated Values:
Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.7.2.2.1.2.1.2 |
||||||||||||||||
|
wrDhcpIpMaskAddress
IP mask Address.
|
RFC1155-SMIIpAddressr/w Enumerated Values:
Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.7.2.2.1.2.1.3 |
||||||||||||||||
|
wrDhcpDefaultGateway
Default Gateway's IP Address.
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.7.2.2.1.2.1.4 |
||||||||||||||||
|
wrDhcpPrimaryDNS
Primary DNS.
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.7.2.2.1.2.1.5 |
||||||||||||||||
|
wrDhcpSecondaryDNS
Secondary DNS.
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.7.2.2.1.2.1.6 |
||||||||||||||||
|
wrDhcpInterface
The IP addresse allocation is done according to the
interface type from which the DHCP request arrives. |
Enumerationr/w | .1.3.6.1.4.1.164.11.7.2.2.1.2.1.7 |
||||||||||||||||
|
wrDhcpRowStatus
This attribute allows to create/delete a row in this table.
For creating a row, the NMS should set wrDhcpRowStatus.id = active(1). For destroying a row, the NMS should set: wrDhcpStatus.id = destroy(6). Only rows with … |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.11.7.2.2.1.2.1.8 |
||||||||||||||||
|
wrDhcpIpAddressLeaseTime
Allocated IP Address lease time in seconds.
A zero value specifies no time limitation. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.7.2.2.1.2.1.9 |
||||||||||||||||
|
wrDhcpPoolName
DHCP pool name - string with max length of 10 characters
|
OctetStringr/w | .1.3.6.1.4.1.164.11.7.2.2.1.2.1.10 |
||||||||||||||||
|
wrDhcpTftpServerIp
DHCP pool - TFTP-server IP Address.
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.7.2.2.1.2.1.11 |
||||||||||||||||
|
wrDhcpConfigFileName
TFTP-name of the configuration File Name for DHCP pool.
|
OctetStringr/w | .1.3.6.1.4.1.164.11.7.2.2.1.2.1.12 |
dhcpPoolAllocTable
table.1.3.6.1.4.1.164.11.7.2.2.1.3
·
1 row entry
·
6 columns
A list of DHCP Pool Allocation entries. Each entry (row) consist of a single IP Address belonging to DHCP pool whose lowest IP address is dhcpPoolAllocLowIpAddress. This IP address may be offered for leasing, or may already be leased (in use) by Host it's MacAddress is dhcpPoolAllocMacAddress. Time left for leasing period is indicated by dhcpPoolAllocTimeLeft. All posible statuses of IP address are indicated and controlled by dhcpPoolAllocFlags
DHCP Pool Allocation parameters per entry of the DHCP Pool Allocation table.
Indexes
wrLanifIndex wrLanIpxFrameType
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
dhcpPoolAllocLowIpAddress
Lowest IP address of this pool, value eqaul to wrDhcpLowIpAddress for
the pool. |
RFC1155-SMIIpAddress Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.7.2.2.1.3.1.1 |
||||||||
|
dhcpPoolAllocLeasingIpAddress
Single IP Address belonging to dhcp pool whose Lowest Ip Address is
dhcpPoolAllocLowIpAddress. This IP address may be offered for leasing or may be leased by Host its MacAddress is dhcpPoolAllocMacAddress. All posible … |
RFC1155-SMIIpAddress Enumerated Values:
Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.7.2.2.1.3.1.2 |
||||||||
|
dhcpPoolAllocMacAddress
MAC Address to which the IP address has been leased
|
MacAddress Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.11.7.2.2.1.3.1.3 |
||||||||
|
dhcpPoolAllocTimeLeft
IP address leasing time left in seconds
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.7.2.2.1.3.1.4 |
||||||||
|
dhcpPoolAllocFlags
These flags indicates status of each IP address.
User may change value to free, via dhcpPoolAllocFreeCmd |
Enumeration | .1.3.6.1.4.1.164.11.7.2.2.1.3.1.5 |
||||||||
|
dhcpPoolAllocFreeCmd
Setting this attribute to On (3), will enforce the agent to
Free this entry. The Agent will change the value of this MIB object to off(2) automatically, after performing the command. Setting this object to off(2), wil… |
Enumerationr/w | .1.3.6.1.4.1.164.11.7.2.2.1.3.1.6 |
dhcpRelayTable
table.1.3.6.1.4.1.164.11.7.2.2.1.4
·
1 row entry
·
3 columns
A list of DHCP relay entries.
DHCP Relay parameters per entry of the DHCP relay table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
dhcpRelayAction
Setting this attribute to enable (3), will
enable DHCP Relay action for this interface (Only if DHCP Server is disabled for device - wrDhcpAction=disable). dhcpRelayServerIpAddressaddress should not be 0.0.0.0 when e… |
Enumerationr/w | .1.3.6.1.4.1.164.11.7.2.2.1.4.1.1 |
|
dhcpRelayServerIpAddress
DHCP Server IP Address.
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.7.2.2.1.4.1.2 |
|
dhcpRelayMaxHop
Maximum number of hops till DHCP Server.
upper limit is 16 hops |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.7.2.2.1.4.1.3 |
dhcpClientTable
table.1.3.6.1.4.1.164.11.7.2.2.1.6
·
1 row entry
·
4 columns
A list of DHCP client entries.
DHCP Client parameters per entry of the DHCP Client table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
dhcpClientAction
This parameter default value is enable(3).
Setting this attribute to disable (2), will disable DHCP Client action for this interface. This parameter can be changed to disable (2) only (it cannot be changed from disab… |
Enumerationr/w | .1.3.6.1.4.1.164.11.7.2.2.1.6.1.1 |
|
dhcpClientServerIpAddress
DHCP Server IP Address.
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.7.2.2.1.6.1.2 |
|
dhcpClientLeaseExpirationTime
This parameter holds the time (in minutes) left until lease expiration.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.7.2.2.1.6.1.3 |
|
dhcpClientStatus
This parametr displays the DHCP status.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.11.7.2.2.1.6.1.4 |
dhcpIfClientTable
table.1.3.6.1.4.1.164.11.7.2.2.1.7
·
1 row entry
·
2 columns
DHCP client entries for each Interface.
DHCP Clients per entry of the DHCP Interface Client table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
dhcpIfClientIpAddress
DHCP Client IP Address.
|
RFC1155-SMIIpAddress Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.7.2.2.1.7.1.2 |
||||||||||||
|
dhcpIfClientRowStatus
The row status used for creating, modifying, and deleting instances
of the columnar objects in the dhcpIfClientTable. For Vmux Devices, it will be possible only to Delete instances. The addition of Clien… |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.11.7.2.2.1.7.1.3 |
dhcpClientNTable
table.1.3.6.1.4.1.164.11.7.2.2.1.9
·
1 row entry
·
21 columns
The DHCP Client table (New).
An entry of this table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
dhcpClientIndex
The DHCP Client index.
Index can be ifIndex and/or index of a router interface or host. |
SNMPv2-SMIUnsigned32 Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.11.7.2.2.1.9.1.1 |
||||||||||||||||||||
|
dhcpClientAdminStatus
The Administrative Status of DHCP client.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.11.7.2.2.1.9.1.2 |
||||||||||||||||||||
|
dhcpClientOperStatus
The Operational Status of DHCP client.
|
Enumeration | .1.3.6.1.4.1.164.11.7.2.2.1.9.1.3 |
||||||||||||||||||||
|
dhcpClientAddressType
The Address Type of all InetAddress objects.
|
INET-ADDRESS-MIBInetAddressTyper/w Textual Convention: INET-ADDRESS-MIBInetAddressType EnumerationType Values:
|
.1.3.6.1.4.1.164.11.7.2.2.1.9.1.4 |
||||||||||||||||||||
|
dhcpClientAddress
The DHCP Client Address, which is assigned by the DHCP server.
|
INET-ADDRESS-MIBInetAddress Textual Convention: INET-ADDRESS-MIBInetAddress OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.11.7.2.2.1.9.1.5 |
||||||||||||||||||||
|
dhcpClientAddressMask
The DHCP Client Address Mask, which is assigned by the DHCP server.
|
INET-ADDRESS-MIBInetAddress Textual Convention: INET-ADDRESS-MIBInetAddress OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.11.7.2.2.1.9.1.6 |
||||||||||||||||||||
|
dhcpClientNextHop
The Next Hop (Default Gateway) of the DHCP client.
|
INET-ADDRESS-MIBInetAddress Enumerated Values:
Textual Convention: INET-ADDRESS-MIBInetAddress OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.11.7.2.2.1.9.1.7 |
||||||||||||||||||||
|
dhcpClientServerAddress
The DHCP Server Address.
Although object is defined as read-write, current support is read-only. |
INET-ADDRESS-MIBInetAddressr/w Enumerated Values:
Textual Convention: INET-ADDRESS-MIBInetAddress OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.11.7.2.2.1.9.1.8 |
||||||||||||||||||||
|
dhcpClientActualLeaseTime
The Actual Lease Time (for Address received from the server),
measured in seconds. Value=FFFFFFFF represents an infinite actual lease time. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.11.7.2.2.1.9.1.9 |
||||||||||||||||||||
|
dhcpClientRemainLeaseTime
The Remaining Lease Time (for Address received from the server),
measured in seconds. Value=FFFFFFFF represents an infinite remaining lease time. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.11.7.2.2.1.9.1.10 |
||||||||||||||||||||
|
dhcpClientCommand
The possible commands of DHCP client to DHCP server.
Upon performing a command, value should be automatically returned to off(2). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.11.7.2.2.1.9.1.11 |
||||||||||||||||||||
|
dhcpClientOpAdminStatus
The Administrative Status of the different options.
Bit=1 means that respective option is enabled/activated. |
Bitsr/w Enumerated Values:
|
.1.3.6.1.4.1.164.11.7.2.2.1.9.1.12 |
||||||||||||||||||||
|
dhcpClientOpVendorClassId
The Vendor Class Identifier.
Identifier should include at least 1 character. |
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.11.7.2.2.1.9.1.13 |
||||||||||||||||||||
|
dhcpClientOpIpAddrLeaseTime
The IP Address Lease Time, measured in seconds.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.11.7.2.2.1.9.1.14 |
||||||||||||||||||||
|
dhcpClientOpServerId
The Server Identifier (reported IP Address).
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.7.2.2.1.9.1.15 |
||||||||||||||||||||
|
dhcpClientOpClientIdType
The Client Identifier Type.
Type=0 indicates that Client Identifier is a string, which is set by dhcpClientOpClientId. Type=1 indicates that Client Identifier represents the Ethernet Hardwa… |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.11.7.2.2.1.9.1.16 |
||||||||||||||||||||
|
dhcpClientOpClientId
The Client Identifier.
Identifier should include at least 1 character. When Type=1 (dhcpClientOpClientIdType), it means that current object is read-only as it represents the Ethernet Hardware Address (MAC… |
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.11.7.2.2.1.9.1.17 |
||||||||||||||||||||
|
dhcpClientOpHostName
The Host Name.
Name should include at least 1 character. |
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.11.7.2.2.1.9.1.18 |
||||||||||||||||||||
|
dhcpClientOpDns
The Domain Name Server (DNS),
which is a list of servers available to the client. This object should include at least 4 octets and must always be a multiple of 4 octets. |
OctetString Enumerated Values:
|
.1.3.6.1.4.1.164.11.7.2.2.1.9.1.19 |
||||||||||||||||||||
|
dhcpClientOpTftpServerName
The TFTP Server Name.
Name should include at least 1 character. |
SNMP-FRAMEWORK-MIBSnmpAdminString Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.11.7.2.2.1.9.1.20 |
||||||||||||||||||||
|
dhcpClientOpBootFileName
The Boot File Name.
Name should include at least 1 character. |
SNMP-FRAMEWORK-MIBSnmpAdminString Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.11.7.2.2.1.9.1.21 |
wrLanIpxNetTable
table.1.3.6.1.4.1.164.11.7.2.3.2
·
1 row entry
·
3 columns
Lan IPX nets Table.
IPX Nets per frame type & LAN port. The table entries
will be created by the agent
will be created by the agent
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
wrLanifIndex
LAN port ifIndex.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.7.2.3.2.1.1 |
||||||||
|
wrLanIpxFrameType
Frame Type
|
Enumeration | .1.3.6.1.4.1.164.11.7.2.3.2.1.2 |
||||||||
|
wrIpxNetAddress
Net address per Frame Type & LAN port.
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.7.2.3.2.1.3 |
ripSapIfConfTable
table.1.3.6.1.4.1.164.11.7.2.3.4
·
1 row entry
·
3 columns
A list of Interfaces which require separate configuration in RIP/SAP.
A Single Routing Domain in a single Subnet.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ripSapIfConfIfIndex
The interface ifIndex.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.7.2.3.4.1.1 |
||||||||||||||||
|
ripSapIfConfMode
The ifIndex RIP/SAP mode.
|
Enumerationr/w | .1.3.6.1.4.1.164.11.7.2.3.4.1.2 |
||||||||||||||||
|
ripSapIfConfStatus
This attribute allows to create/delete a row in this table.
For creating a row, the NMS should set ripSapIfConfStatus.id1 = active(1). For destroying a row, the NMS should set: ripSapIfConfStatus.id1 = destroy(6). Only… |
SNMPv2-TCRowStatusr/w Enumerated Values:
Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.11.7.2.3.4.1.3 |
wrIpAddressTable
table.1.3.6.1.4.1.164.11.7.2.4.1
·
1 row entry
·
4 columns
Link IP addresses Table.
Ip Address per Link
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
wrIpIfIndex
Port interface index.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.7.2.4.1.1.1 |
||||||||||||
|
wrIpAddress
Link IP Address.
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.7.2.4.1.1.2 |
||||||||||||
|
wrIpMask
Link IP mask Address.
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.7.2.4.1.1.3 |
||||||||||||
|
wrIpRowStatus
This attribute allows to create/delete a row in this table.
For creating a row, the NMS should set wrIpRowStatus.id1 = active(1). For destroying a row, the NMS should set: wrIpRowStatus.id1 = destroy(6). Only rows with… |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.11.7.2.4.1.1.4 |
wrSpoofingTable
table.1.3.6.1.4.1.164.11.7.2.4.2
·
1 row entry
·
4 columns
Spoofing Table.
Spoofing per Link
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
wrSpoofingIfIndex
Port interface index.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.7.2.4.2.1.1 |
||||||||||||
|
wrSpoofingAction
Spoofing action is applied by bit code:
enable : bit 0 set (disable: bit 0 is 0) keepAlive : bit 1 ... : bit 2 and so on. For the above example, to set spoofing to keepAlive action, the object's … |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.7.2.4.2.1.2 |
||||||||||||
|
wrSpoofingAgingStation
Aging time of stations list, in min. The agent 'translates'
the time entered in minutes, to 10 min. resolution, as follows: 1..10 min - 10 min 11..20 min - 20 min and so on... 0 is not a valid valu… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.7.2.4.2.1.3 |
||||||||||||
|
wrSpoofingRowStatus
This attribute allows to create/delete a row in this table.
For creating a row, the NMS should set wrSpoofingRowStatus.id1 = active(1). For destroying a row, the NMS should set: wrSpoofingRowStatus.id1 = destroy(6). On… |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.11.7.2.4.2.1.4 |
wrLanIfTable
table.1.3.6.1.4.1.164.11.7.2.4.3
·
1 row entry
·
4 columns
Link IP addresses Table.
Ip Address per Link
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
wrLanIfIndex
Port interface index.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.7.2.4.3.1.1 |
|
wrLanBridgeRouterMode
This parameter indicates whether the link is Bridge
or Router and specifies the Router's type. |
Enumerationr/w | .1.3.6.1.4.1.164.11.7.2.4.3.1.2 |
|
wrLanIfState
The LAN is disabled or enabled.
For LAN 2 it can be also 'redundancy'. |
Enumerationr/w | .1.3.6.1.4.1.164.11.7.2.4.3.1.3 |
|
wrLanIfRdnTimeout
LAN Redundancy Timeout in seconds.
Applicable when wrLanIfState=redundancy. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.7.2.4.3.1.4 |
wrSyncCnfgTable
table.1.3.6.1.4.1.164.11.7.2.4.4
·
1 row entry
·
3 columns
Configuration table for Async interface.
Configuration table
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
wrSyncIfIndex
Sync interface index.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.7.2.4.4.1.1 |
|
wrSyncClkMode
Clock Mode.
|
Enumerationr/w | .1.3.6.1.4.1.164.11.7.2.4.4.1.2 |
|
wrSyncClkRate
Clock Rate in. Rate can be changed if Clock Mode is Program only.
|
Enumerationr/w | .1.3.6.1.4.1.164.11.7.2.4.4.1.3 |
wrFrCnfgTable
table.1.3.6.1.4.1.164.11.7.2.4.5
·
1 row entry
·
2 columns
Configuration table for Fr parameters that do not exist in RFC2115.
Configuration entry for Fr parameters that do not exist in RFC2115.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
wrFrDlciLearningMode
This parameter enables the webranger to learn the DLCi's
configuration and maintanance protocol for the current interface. off - the WR will read the user's configuration for this interface. on - the WR will begin sel… |
Enumerationr/w | .1.3.6.1.4.1.164.11.7.2.4.5.1.1 |
|
wrFrCllmMessages
This parameter enables/disables the Webranger to Tx/Rx CLLM
(Consolidated Link Layer Management) messages via DLCI 1023. The CLLM messages are link layer control messages. They can be used for example in cases of c… |
Enumerationr/w | .1.3.6.1.4.1.164.11.7.2.4.5.1.2 |
rtrIfIpTable
table.1.3.6.1.4.1.164.11.7.3.1
·
1 row entry
·
6 columns
Router interfaces table.
An entry in table rtrIfIpTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
rtrIfIp
IP Address.
|
RFC1155-SMIIpAddress Enumerated Values:
Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.7.3.1.1.1 |
||||||||||||||||||||||
|
rtrIfRowStatus
.
|
SNMPv2-TCRowStatusr/w Enumerated Values:
Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.11.7.3.1.1.2 |
||||||||||||||||||||||
|
rtrIfIpMask
IP mask Address.
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.7.3.1.1.3 |
||||||||||||||||||||||
|
rtrIfIndex
The ifIndex connection, on which the IP is determined.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.7.3.1.1.4 |
||||||||||||||||||||||
|
rtrIfMng
An IP interface might be determined as a management
connection (under the product limitations). |
Enumerationr/w | .1.3.6.1.4.1.164.11.7.3.1.1.5 |
||||||||||||||||||||||
|
rtrIfVlanId
The VLAN ID assigned to Tagged frames transmitted
from this port. The value inserted should be a defined VLAN. |
Q-BRIDGE-MIBVlanIndexr/w Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32 |
.1.3.6.1.4.1.164.11.7.3.1.1.6 |
brtrIfTable
table.1.3.6.1.4.1.164.11.7.3.2
·
1 row entry
·
3 columns
LAN interface table.
The entries of this table will be created by agent.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
brtrIfIndex
The index of the interface (LAN or ATM).
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.7.3.2.1.1 |
||||||
|
brtrIfMode
Connection Mode.
|
Enumerationr/w | .1.3.6.1.4.1.164.11.7.3.2.1.2 |
||||||
|
brtrIfMaxFrameSize
Frame Max Size.
|
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.7.3.2.1.3 |
brtrLanIfTable
table.1.3.6.1.4.1.164.11.7.3.4
·
1 row entry
·
7 columns
LAN interface table.
The entries of this table will be created by agent .
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
brtrLanIfIndex
The index of the LAN entity (physical interface).
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.7.3.4.1.1 |
||||||
|
brtrLanIpAddress
Host IP address. Applicable for bridge mode connection only.
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.7.3.4.1.2 |
||||||
|
brtrLanIpMask
Host IP Mask. Applicable for bridge mode connection only.
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.7.3.4.1.3 |
||||||
|
brtrLanMaxRateEnable
This parameter determines the HW ability of the LAN
card according to HW. |
Enumeration | .1.3.6.1.4.1.164.11.7.3.4.1.4 |
||||||
|
brtrLanMaxRate
Max Rate.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.7.3.4.1.5 |
||||||
|
brtrLanMng
An IP interface might be determined as a management
connection (under the product limitations). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.11.7.3.4.1.6 |
||||||
|
brtrLanDefaultRouter
Default Router's (Gateway's) IP Address.
For each LAN interface there may be a different Default Router. |
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.7.3.4.1.7 |
rtrIsdnIfTable
table.1.3.6.1.4.1.164.11.7.3.5
·
1 row entry
·
2 columns
This table contains ISDN parameters that do not appear in the standard MIBs.
Entries for ISDN parameters that do not appear in the standard MIBs.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
rtrIsdnIfMinNumBchans
Minimum number of B channels that the ISDN Dialer of the router will use
for Dialing out. This parameter will be used for the BOD (Bandwidth On Demand) feature. Dial up on B channels is according to the need of bandwidt… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.7.3.5.1.1 |
|
rtrIsdnIfMaxNumBchans
Maximum number of B channels that the ISDN Dialer of the router will use
for Dialing out. This parameter will be used for the BOD (Bandwidth On Demand) feature. Dial up on B channels is according to the need of bandwidt… |
SNMPv2-SMIInteger32r/w Constraints: range: 0-899Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.7.3.5.1.2 |
rtrLcrTable
table.1.3.6.1.4.1.164.11.7.3.6
·
1 row entry
·
4 columns
Least Cost Routing Table. The user will be able to set a prefix for an outgoing number that arrives with a predefined prefix in order to redirect the number for the LCR process to be achieved.
Least Cost Routing Entry.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
rtrLcrOutIfIndex
The outgoing interface Number of the current route.
The incoming interface number is the value of ifIndex. |
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.164.11.7.3.6.1.1 |
||||||||||||
|
rtrLcrRowStatus
Row Status for adding/destroying rows.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.11.7.3.6.1.2 |
||||||||||||
|
rtrLcrInPrefix
This prefix is part of the called number existing in the incoming packet.
|
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.11.7.3.6.1.3 |
||||||||||||
|
rtrLcrOutPrefix
This prefix will be inserted into the outgoing packet.
|
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.11.7.3.6.1.4 |
rtrConfigTable
table.1.3.6.1.4.1.164.11.9.1
·
1 row entry
·
5 columns
The Router's Configuration table.
An entry in the Router's Configuration table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
rtrConfigIndex
This object indicates the Router's Index.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.9.1.1.1 |
|
rtrConfigDefaultGateway
Router Default Gateway.
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.9.1.1.2 |
|
rtrConfigArpAgingTime
ARP Aging Time.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.9.1.1.3 |
|
rtrConfigClassifierTosMask
This object indicates the Classifier's TOS Mask,
as follows: 0x1C for DTR -- rfc795 0x1E for Cisco 0xE0 for Precedence -- rfc795 0xFC for Diffserv Else for Manual . |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.9.1.1.5 |
|
rtrConfigRIPMode
This object determines the Router Information Protocol
to measure the shortest path between 2 positions on the network. |
Enumerationr/w | .1.3.6.1.4.1.164.11.9.1.1.6 |
rtrFwdTable
table.1.3.6.1.4.1.164.11.9.3
·
1 row entry
·
11 columns
The Router's Forwarding Table.
An entry in the Router's Forwarding table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
rtrFwdIdx
This object indicates the Router Index.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.9.3.1.1 |
||||||||||||
|
rtrFwdIpAddress
This object indicates the Destination IP Address.
|
RFC1155-SMIIpAddress Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.9.3.1.2 |
||||||||||||
|
rtrFwdIpMask
This object indicates the Mask IP address.
|
RFC1155-SMIIpAddress Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.9.3.1.3 |
||||||||||||
|
rtrFwdRuleIdx
This object indicates the Rule's Number.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.9.3.1.4 |
||||||||||||
|
rtrFwdRowStatus
This object enables the user to
create/delete entries in this table. Entry of Type rtrFwdType = staticRouting(3) are created by the user. Only this type of entries can be deleted by the user. … |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.11.9.3.1.5 |
||||||||||||
|
rtrFwdNextHop
This object indicates the IP Address of the Next Hop.
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.9.3.1.6 |
||||||||||||
|
rtrFwdIfIndex
This object indicates the Interface Index.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.9.3.1.7 |
||||||||||||
|
rtrFwdType
The type of route. Note that local(3) refers
to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is not the final destina- tion. Routes … |
Enumerationr/w | .1.3.6.1.4.1.164.11.9.3.1.8 |
||||||||||||
|
rtrFwdProto
The routing mechanism via which this route was
learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols. |
Enumeration | .1.3.6.1.4.1.164.11.9.3.1.9 |
||||||||||||
|
rtrFwdEthQueue
This object indicates the ETH Queue number.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.9.3.1.10 |
||||||||||||
|
rtrFwdMetric1
The primary routing metric for this route.
The semantics of this metric are determined by the routing-protocol specified in the route's rtrFwdProto value. If this metric is not used, its value should be set to -1. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.11.9.3.1.11 |
rtrPbrTable
table.1.3.6.1.4.1.164.11.9.4
·
1 row entry
·
15 columns
The Router's Forwarding Table.
An entry in the Router's Policy Based Routing (PBR) table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
rtrPbrIdx
This object indicates the Router Index.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.11.9.4.1.1 |
||||||||||||
|
rtrPbrInterface
Router interface for which this match-set
rule applies. |
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.164.11.9.4.1.2 |
||||||||||||
|
rtrPbrRuleIdx
This object indicates the Policy Based Routing (PBR)
match-set rule index. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.11.9.4.1.3 |
||||||||||||
|
rtrPbrRowStatus
This object enables the user to
create/delete entries of this table. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.11.9.4.1.4 |
||||||||||||
|
rtrPbrMatchAllFrames
Forwarding decision is made regardless PBR Rule
(as if all conditions are matched) |
Enumerationr/w | .1.3.6.1.4.1.164.11.9.4.1.5 |
||||||||||||
|
rtrPbrSourceIpAddress
Received frame source IP Address.
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.9.4.1.6 |
||||||||||||
|
rtrPbrSourceIpMask
The subnet mask of the source IP Address.
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.9.4.1.7 |
||||||||||||
|
rtrPbrDestIpAddress
Received frame destination IP Address.
|
RFC1155-SMIIpAddressr/w Constraints: range: 1-96Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.9.4.1.8 |
||||||||||||
|
rtrPbrDestIpMask
The subnet mask of the destination IP Address.
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.9.4.1.9 |
||||||||||||
|
rtrPbrIpProtocol
Value of Protocol field in IP Frame header.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.11.9.4.1.10 |
||||||||||||
|
rtrPbrMinFrameLength
.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.11.9.4.1.11 |
||||||||||||
|
rtrPbrMaxFrameLength
.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.11.9.4.1.12 |
||||||||||||
|
rtrPbrDiscardFrame
Discard a frame when rule is matched .
|
Enumerationr/w | .1.3.6.1.4.1.164.11.9.4.1.13 |
||||||||||||
|
rtrPbrForwardingInterface
The router Interface through which the frame
should be forwarded, when rule is matched. If there's no forwarding interface, then this object has a value of zero |
IF-MIBInterfaceIndexOrZeror/w Textual Convention: IF-MIBInterfaceIndexOrZero Integer32Type Constraints: range: 0..2147483647 |
.1.3.6.1.4.1.164.11.9.4.1.14 |
||||||||||||
|
rtrPbrNextHop
IP Address of Next Hop, when Forwarding Interface is LAN,
or has BridgePDU (BVI) encapsulation. |
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.11.9.4.1.15 |
atmIfDataTable
table.1.3.6.1.4.1.164.12.2.1.1.1
·
1 row entry
·
5 columns
The ATM interface Data table.
An entry in the ATM interface Data table.
Indexes
IF-MIBifIndex atmVpCurrentVpi
| Column | Syntax | OID |
|---|---|---|
|
atmIfTimeElapsed
The number of seconds that have elapsed since
the beginning of the near end current error- measurement period. |
Integer32 | .1.3.6.1.4.1.164.12.2.1.1.1.1.1 |
|
atmIfValidIntervals
The number of previous near end intervals for
which valid data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complet… |
Integer32 | .1.3.6.1.4.1.164.12.2.1.1.1.1.2 |
|
atmIfTxCells
The counter associated with the total number of transmitted
cells, encountered by an ATM interface. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.1.1.1.3 |
|
atmIfRxCells
The counter associated with the total number of received
cells, encountered by an ATM interface. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.1.1.1.4 |
|
atmIfUncorrectedHecs
The counter associated with the total number of cells with
uncorrected HEC errors, encountered by an ATM interface. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.1.1.1.5 |
atmIfCurrentTable
table.1.3.6.1.4.1.164.12.2.1.1.2
·
1 row entry
·
5 columns
The ATM interface Current table.
An entry in the ATM interface Current table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
atmIfCurrentTxCells
The counter associated with the number of transmitted
cells, encountered by an ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.1.2.1.1 |
|
atmIfCurrentRxCells
The counter associated with the number of received
cells, encountered by an ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.1.2.1.2 |
|
atmIfCurrentCorrectedHecs
The counter associated with the number of cells with
corrected HEC errors, encountered by an ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.1.2.1.3 |
|
atmIfCurrentUncorrectedHecs
The counter associated with the number of cells with
uncorrected HEC errors, encountered by an ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.1.2.1.4 |
|
atmIfCurrentHecErrorSeconds
The counter associated with the number of seconds with
HEC errors, encountered by an ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.1.2.1.5 |
atmIfIntervalTable
table.1.3.6.1.4.1.164.12.2.1.1.3
·
1 row entry
·
6 columns
The ATM interface Interval table.
An entry in the ATM interface Interval table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
atmIfIntervalNumber
A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid). |
Integer32 | .1.3.6.1.4.1.164.12.2.1.1.3.1.1 |
|
atmIfIntervalTxCells
The counter associated with the number of transmitted
cells , encountered by an ATM interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.1.3.1.2 |
|
atmIfIntervalRxCells
The counter associated with the number of received
cells, encountered by an ATM interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.1.3.1.3 |
|
atmIfIntervalCorrectedHecs
The counter associated with the number of cells with
corrected HEC errors, encountered by an ATM interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.1.3.1.4 |
|
atmIfIntervalUncorrectedHecs
The counter associated with the number of cells with
uncorrected HEC errors, encountered by an ATM interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.1.3.1.5 |
|
atmIfIntervalHecErrorSeconds
The counter associated with the number of seconds with
HEC errors, encountered by an ATM interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.1.3.1.6 |
aal5VccXTable
table.1.3.6.1.4.1.164.12.2.1.1.4
·
1 row entry
·
3 columns
This table is an extension to AAL5 VCC Table.
This list contains the additional AAL5 VCC
performance parameters and is indexed
by ifIndex values of AAL5 interfaces
and the associated VPI/VCI values.
performance parameters and is indexed
by ifIndex values of AAL5 interfaces
and the associated VPI/VCI values.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
aal5VccInFrames
The number of frames received via this interface.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.1.4.1.1 |
|
aal5VccOutFrames
The total number of frames transmitted out of the
interface. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.1.4.1.2 |
|
aal5VccUnknownProtocolFrames
The number of frames that were discarded due to unsupported
protocol encapsulation on this VCC. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.1.4.1.3 |
aal5VccCurrentTable
table.1.3.6.1.4.1.164.12.2.1.1.5
·
1 row entry
·
7 columns
The AAL5 Current table.
An entry in the AAL5 Current table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
aal5VccCurrentInFrames
The counter associated with the number of received frames,
encountered by the AAL5 interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.1.5.1.1 |
||||
|
aal5VccCurrentOutFrames
The counter associated with the number of transmitted frames,
encountered by the AAL5 interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.1.5.1.2 |
||||
|
aal5VccCurrentUnknownProtocolFrames
The counter associated with the number of frames that were
discarded due to unsupported protocol encapsulation, encountered by the AAL5 interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.1.5.1.3 |
||||
|
aal5VccCurrentCrcErrors
The counter associated with the number of AAL5 CPCS PDUs
received with CRC-32 errors, encountered by the AAL5 interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.1.5.1.4 |
||||
|
aal5VccCurrentLengthError
The counter associated with the number of received frames
with length error, encountered by the AAL5 interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.1.5.1.5 |
||||
|
aal5VccCurrentInputCongestionDropped
The counter associated with the number of
dropped frames due to congestion, encountered by the AAL5 interface on the Receive direction in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.1.5.1.6 |
||||
|
aal5VccCurrentOutputCongestionDropped
The counter associated with the number of
dropped frames due to congestion, encountered by the AAL5 interface on the Transmit direction in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.1.5.1.7 |
aal5VccIntervalTable
table.1.3.6.1.4.1.164.12.2.1.1.6
·
1 row entry
·
8 columns
The AAL5 Interval table.
An entry in the AAL5 Interval table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
aal5VccIntervalNumber
A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals exist). |
Integer32 | .1.3.6.1.4.1.164.12.2.1.1.6.1.1 |
||||
|
aal5VccIntervalInFrames
The counter associated with the number of received frames,
encountered by the AAL5 interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.1.6.1.2 |
||||
|
aal5VccIntervalOutFrames
The counter associated with the number of transmitted frames,
encountered by the AAL5 interface in in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.1.6.1.3 |
||||
|
aal5VccIntervalUnknownProtocolFrames
The counter associated with the number of frames that were
discarded due to unsupported protocol encapsulation, encountered by the AAL5 interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.1.6.1.4 |
||||
|
aal5VccIntervalCrcErrors
The counter associated with the number of AAL5 CPCS PDUs
received with CRC-32 errors, encountered by the AAL5 interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.1.6.1.5 |
||||
|
aal5VccIntervalLengthError
The counter associated with the number of received frames
with length error, encountered by the AAL5 interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.1.6.1.6 |
||||
|
aal5VccIntervalInputCongestionDropped
The counter associated with the number of dropped frames
due to a congestion, encountered by the AAL5 interface on the Receive direction in one of the previous 96, individual 15 minute, intervals |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.1.6.1.7 |
||||
|
aal5VccIntervalOutputCongestionDropped
The counter associated with the number of dropped frames
due to a congestion, encountered by the AAL5 interface on the Transmit direction in one of the previous 96, individual 15 minute, intervals |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.1.6.1.8 |
atmVpCurrentTable
table.1.3.6.1.4.1.164.12.2.1.2.1.1
·
1 row entry
·
24 columns
The ATM VP Current table.
An entry in the ATM VP Current table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
atmVpCurrentVpi
The VPI of the VPL.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.2.1.2.1.1.1.1 |
|
atmVpCurrentRxCellsClp01
The counter associated with the number of transmitted
cells, encountered by the VPL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.1.1.2 |
|
atmVpCurrentRxCellsClp0
The counter associated with the number of received
cells, encountered by the VPL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.1.1.3 |
|
atmVpCurrentGcra0Violations
The counter associated with the number of cells
violating GCRA0, encountered by the VPL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.1.1.4 |
|
atmVpCurrentGcra1Violations
The counter associated with the number of cells
violating GCRA1, encountered by the VPL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.1.1.5 |
|
atmVpCurrentRxAIS
The counter associated with the number of received
AIS cells, encountered by the VPL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.1.1.6 |
|
atmVpCurrentTxAIS
The counter associated with the number of transmitted
AIS cells, encountered by the VPL of this ATM interface in the current 15 minute interval. Not Supported in the first phase. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.1.1.7 |
|
atmVpCurrentRxRDI
The counter associated with the number of received
RDI cells, encountered by the VPL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.1.1.8 |
|
atmVpCurrentTxRDI
The counter associated with the number of transmitted
RDI cells, encountered by the VPL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.1.1.9 |
|
atmVpCurrentContinuityLoss
The counter associated with the number of loss of
continuity cells, encountered by the VPL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.1.1.10 |
|
atmVpCurrentUAS
The counter associated with the number of Unavailable
Seconds, encountered by the VPL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.1.1.11 |
|
atmVpCurrentSES
The counter associated with the number of Severerly Errored
Seconds, encountered by the VPL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.1.1.12 |
|
atmVpCurrentCDC
Amount of cells dropped in the current 15 minute interval
of the VP connection. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.1.1.13 |
|
atmVpCurrentTotalDiscards
The total number of valid ATM cells discarded by
the traffic policing entity. This includes cells originally received with CLP=0 and CLP=1. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.1.1.14 |
|
atmVpCurrentClp0Discards
The total number of valid ATM cells received with
CLP=0 and discarded by the traffic policing entity. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.1.1.15 |
|
atmVpCurrentTotalCellOuts
The total number of valid ATM cells transmitted
by this VPL. This includes both CLP=0 and CLP=1 cells. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.1.1.16 |
|
atmVpCurrentClp0CellOuts
The total number of valid ATM cells transmitted
with CLP=0 by this VPL. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.1.1.17 |
|
atmVpCurrentTaggedOuts
The total number of valid ATM cells tagged by the
traffic policing entity from CLP=0 to CLP=1 and transmitted by this VPL. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.1.1.18 |
|
atmVpCurrentPCR
The maximum traffic rate encountered in the
last interval of the VP connection (monitored once a second). |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.1.1.19 |
|
atmVpCurrentSCR
The average traffic rate during the last interval of the VP
connection. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.1.1.20 |
|
atmVpCurrentMCR
MCR - The minimum traffic rate encountered in the last
interval of the VP connection (monitored once a second). |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.1.1.21 |
|
atmVpCurrentShaperTotalDiscards
The total number of cells (CLP0 and CLP1) discarded
due to congestion by the traffic shaper. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.1.1.22 |
|
atmVpCurrentShaperClp0Discards
The total number of CLP0 cells discarded
due to congestion by the traffic shaper. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.1.1.23 |
|
atmVpCurrentShaperClp1Discards
The total number of CLP1 cells discarded
due to congestion by the traffic shaper. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.1.1.24 |
atmVpPMCurrentTable
table.1.3.6.1.4.1.164.12.2.1.2.1.2
·
1 row entry
·
16 columns
The ATM VP Current table for Performance Management.
An entry in the ATM VP Current table for Performance
Management.
Management.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
atmVpPMCurrentVpi
The VPI of the VPL.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.2.1.2.1.2.1.1 |
||||
|
atmVpPMCurrentDir
The direction of performance management.
|
Enumeration Constraints: range: 1-96 |
.1.3.6.1.4.1.164.12.2.1.2.1.2.1.2 |
||||
|
atmVpPMCurrentTxClp01
The counter associated with the number of transmitted
CLP 0+1 cells, encountered by the VPL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.2.1.3 |
||||
|
atmVpPMCurrentTxClp0
The counter associated with the number of transmitted
CLP 0 cells, encountered by the VPL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.2.1.4 |
||||
|
atmVpPMCurrentRxClp01
The counter associated with the number of received
CLP 0+1 cells, encountered by the VPL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.2.1.5 |
||||
|
atmVpPMCurrentRxClp0
The counter associated with the number of received
CLP 0 cells, encountered by the VPL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.2.1.6 |
||||
|
atmVpPMCurrentErroredCells
The counter associated with the number of errored
cells, encountered by the VPL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.2.1.7 |
||||
|
atmVpPMCurrentLostCells
The counter associated with the number of lost
cells, encountered by the VPL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.2.1.8 |
||||
|
atmVpPMCurrentMisinsertedCells
The counter associated with the number of misinserted
cells, encountered by the VPL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.2.1.9 |
||||
|
atmVpPMCurrentECB
The counter associated with the number of ECB,
encountered by the VPL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.2.1.10 |
||||
|
atmVpPMCurrentSECB
The counter associated with the number of SECB,
encountered by the VPL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.2.1.11 |
||||
|
atmVpPMCurrentES
The counter associated with the number of
Errored Seconds, encountered by the VPL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.2.1.12 |
||||
|
atmVpPMCurrentSES
The counter associated with the number of Severely
Errored Seconds, encountered by the VPL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.2.1.13 |
||||
|
atmVpPMCurrentUAS
The counter associated with the number of Unavailable
Seconds, encountered by the VPL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.2.1.14 |
||||
|
atmVpPMCurrentIntervalQuality
If the number of errors per interval is superior to
the atmNteUPLTCR value, the quality of service of the interval is declared as unacceptable. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.12.2.1.2.1.2.1.15 |
||||
|
atmVpPMCurrentLastDayQuality
If the number of errors per 24 hours is superior to
the atmNteDPLTCR value, the quality of service of the day is declared as degraded. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.12.2.1.2.1.2.1.16 |
atmVpIntervalTable
table.1.3.6.1.4.1.164.12.2.1.2.1.3
·
1 row entry
·
25 columns
The ATM Vp Interval table.
An entry in the ATM Vp Interval table.
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
atmVpIntervalVpi
The VPI of the VPL.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.2.1.2.1.3.1.1 |
||||||||
|
atmVpIntervalNumber
A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid). |
Integer32 | .1.3.6.1.4.1.164.12.2.1.2.1.3.1.2 |
||||||||
|
atmVpIntervalRxCellsClp01
The counter associated with the number of transmitted
cells , encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.3.1.3 |
||||||||
|
atmVpIntervalRxCellsClp0
The counter associated with the number of received
cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.3.1.4 |
||||||||
|
atmVpIntervalGcra0Violations
The counter associated with the number of
cells violating GCRA0, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.3.1.5 |
||||||||
|
atmVpIntervalGcra1Violations
The counter associated with the number of
cells violating GCRA1, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.3.1.6 |
||||||||
|
atmVpIntervalRxAIS
The counter associated with the number of received
AIS cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.3.1.7 |
||||||||
|
atmVpIntervalTxAIS
The counter associated with the number of transmitted
AIS cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. Not supported in the first phase. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.3.1.8 |
||||||||
|
atmVpIntervalRxRDI
The counter associated with the number of received
RDI cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.3.1.9 |
||||||||
|
atmVpIntervalTxRDI
The counter associated with the number of transmitted
RDI cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.3.1.10 |
||||||||
|
atmVpIntervalContinuityLoss
The counter associated with the number of Continuity
Loss cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.3.1.11 |
||||||||
|
atmVpIntervalUAS
The counter associated with the number of Unavailable
Seconds, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.3.1.12 |
||||||||
|
atmVpIntervalSES
The counter associated with the number of Severerly Errored
Seconds, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.3.1.13 |
||||||||
|
atmVpIntervalCDC
Amount of cells dropped in the 15 minute interval
of the VP connection. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.3.1.14 |
||||||||
|
atmVpIntervalTotalDiscards
The total number of valid ATM cells discarded by
the traffic policing entity. This includes cells originally received with CLP=0 and CLP=1. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.3.1.15 |
||||||||
|
atmVpIntervalClp0Discards
The total number of valid ATM cells received with
CLP=0 an discarded by the traffic policing entity. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.3.1.16 |
||||||||
|
atmVpIntervalTotalCellOuts
The total number of valid ATM cells transmitted
by this VPL. This includes both CLP=0 and CLP=1 cells. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.3.1.17 |
||||||||
|
atmVpIntervalClp0CellOuts
The total number of valid ATM cells transmitted
with CLP=0 by this VPL. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.3.1.18 |
||||||||
|
atmVpIntervalTaggedOuts
The total number of valid ATM cells tagged by the
traffic policing entity from CLP=0 to CLP=1 and transmitted by this VPL. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.3.1.19 |
||||||||
|
atmVpIntervalPCR
The maximum traffic rate encountered in the last
interval of the VP connection (monitored once a second) encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.3.1.20 |
||||||||
|
atmVpIntervalSCR
The average traffic rate during the last interval of the
VP connection , encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.3.1.21 |
||||||||
|
atmVpIntervalMCR
MCR - The minimum traffic rate encountered in the last
interval of the VP connection (monitored once a second) encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.3.1.22 |
||||||||
|
atmVpIntervalShaperTotalDiscards
The total number of cells (CLP0 and CLP1) discarded
due to congestion by the traffic shaper. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.3.1.23 |
||||||||
|
atmVpIntervalShaperClp0Discards
The total number of CLP0 cells discarded
due to congestion by the traffic shaper. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.3.1.24 |
||||||||
|
atmVpIntervalShaperClp1Discards
The total number of CLP1 cells discarded
due to congestion by the traffic shaper. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.3.1.25 |
atmVpPMIntervalTable
table.1.3.6.1.4.1.164.12.2.1.2.1.4
·
1 row entry
·
17 columns
The ATM Vp Interval table for Performance Management.
An entry in the ATM Vp Interval table for Performance
Management.
Management.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
atmVpPMIntervalVpi
The VPI of the VPL.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.2.1.2.1.4.1.1 |
|
atmVpPMIntervalDir
The direction of performance management.
|
Enumeration | .1.3.6.1.4.1.164.12.2.1.2.1.4.1.2 |
|
atmVpPMIntervalNumber
A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid). |
Integer32 | .1.3.6.1.4.1.164.12.2.1.2.1.4.1.3 |
|
atmVpPMIntervalTxClp01
The counter associated with the number of transmitted
CLP 0+1 cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.4.1.4 |
|
atmVpPMIntervalTxClp0
The counter associated with the number of transmitted
CLP 0 cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.4.1.5 |
|
atmVpPMIntervalRxClp01
The counter associated with the number of received
CLP 0+1 cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.4.1.6 |
|
atmVpPMIntervalRxClp0
The counter associated with the number of received
CLP 0 cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.4.1.7 |
|
atmVpPMIntervalErroredCells
The counter associated with the number of Errored
cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.4.1.8 |
|
atmVpPMIntervalLostCells
The counter associated with the number of Lost
cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.4.1.9 |
|
atmVpPMIntervalMisinsertedCells
The counter associated with the number of Misinserted
cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.4.1.10 |
|
atmVpPMIntervalECB
The counter associated with the number of ECBs
encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.4.1.11 |
|
atmVpPMIntervalSECB
The counter associated with the number of SECBs
encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.4.1.12 |
|
atmVpPMIntervalES
The counter associated with the number of Errored
Seconds, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.4.1.13 |
|
atmVpPMIntervalSES
The counter associated with the number of Severely
Errored Seconds, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.4.1.14 |
|
atmVpPMIntervalUAS
The counter associated with the number of Unavailable
Seconds, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.4.1.15 |
|
atmVpPMIntervalQuality
If the number of errors per interval is superior to
the atmNteUPLTCR value, the quality of service of the interval is declared as unacceptable. |
Enumeration | .1.3.6.1.4.1.164.12.2.1.2.1.4.1.16 |
|
atmVpPMIntervalLastDayQuality
If the number of errors per 24 hours is superior to
the atmNteDPLTCR value, the quality of service of the day is declared as degraded. |
Enumeration | .1.3.6.1.4.1.164.12.2.1.2.1.4.1.17 |
atmVpQoSTable
table.1.3.6.1.4.1.164.12.2.1.2.1.5
·
1 row entry
·
3 columns
The VP QoS table.
.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
atmVpQoSPeriodRef
This object is an index that specifies which period of time, the next
2 objects refer to. currentPeriod - the period since last systemResetAllStatsCmd received or since Start-up (if no systemResetAllSta… |
Enumeration | .1.3.6.1.4.1.164.12.2.1.2.1.5.1.1 |
|
atmVpQoSElapsedTime
Elapsed Time in seconds.
- for atmVpQoSPeriodRef = currentPeriod: The period since last systemResetAllStatsCmd received or since Start-up (if no systemResetAllStatsCmd was received since Start-up) until now. - for … |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.2.1.2.1.5.1.2 |
|
atmVpQoSUAS
Number of Unavailable Seconds for the reference period (atmVpQoSPeriodRef).
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.5.1.3 |
atmVpPMQoSTable
table.1.3.6.1.4.1.164.12.2.1.2.1.6
·
1 row entry
·
5 columns
The PM VP QoS table.
.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
atmVpPMQoSDirection
The direction of performance management.
|
Enumeration | .1.3.6.1.4.1.164.12.2.1.2.1.6.1.1 |
|
atmVpPMQoSPeriodRef
This object is an index that specifies which period of time, the next
5 objects refer to. currentPeriod - the period since last systemResetAllStatsCmd received or since Start-up (if no systemResetAllStat… |
Enumeration | .1.3.6.1.4.1.164.12.2.1.2.1.6.1.2 |
|
atmVpPMQoSCLR
Cell Loss Ratio counter for the reference period (atmVpPMQoSPeriodRef)-
defined in accordance with I.356 , in %. The value will be multipuled by 100. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.6.1.3 |
|
atmVpPMQoSCER
Cell Error Ratio counter for the reference period (atmVpPMQoSPeriodRef)
defined in accordance with I.356 , in %. The value will be multipuled by 100. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.6.1.4 |
|
atmVpPMQoSCMR
Cell Misinsertion Ratio counter for the reference period (atmVpPMQoSPeriodRef)
defined in accordance with I.356 , cells/sec . |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.6.1.5 |
atmVpShaperStatTable
table.1.3.6.1.4.1.164.12.2.1.2.1.7
·
1 row entry
·
6 columns
The ATM VP shaper statistics table.
An entry in the ATM VP shaper statistics table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
atmVpShaperDiscarded
The number of Cells that were discarded in the shaper on that VPC due
to buffer overflow. This counter counts till it reaches its MAX value (20 bits) and then rolls over. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.7.1.1 |
||||
|
atmVpShaperOccupation
The number of Cells that are currently stored in the buffer.
This parameter is limited to 20 bits. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.2.1.2.1.7.1.2 |
||||
|
atmVpShaperMaxOccupation
The Maximum number of Cells that were stored in the buffer,
since this VP was activated. This parameter is limited to 20 bits. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.2.1.2.1.7.1.3 |
||||
|
atmVpShaperLevel
The occupation of the buffer according to a predefined threshold.
empty - buffer is Empty full - buffer is Full below - buffer is Below the threshold above - buffer is Above the threshold. This is also the trigger to … |
Enumeration | .1.3.6.1.4.1.164.12.2.1.2.1.7.1.4 |
||||
|
atmVpShaperEpdDropped
The number of Cells that were dropped in the shaper on that VPC
due to EPD\PPD mechanism in the last second. This parameter is limited to 24 bits. Applicable for a EPD/PPD VP only. |
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.7.1.5 |
||||
|
atmVpShaperTotalEpdDropped
The Total number of Cells that were dropped in the shaper on that
VPC due to EPD\PPD mechanism in the last 15 minutes. This counter automatically reset itself every 15 minutes. Applicable for a EPD/PPD VP only. |
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.1.7.1.6 |
atmVcCurrentTable
table.1.3.6.1.4.1.164.12.2.1.2.2.1
·
1 row entry
·
25 columns
The ATM VC Current table.
An entry in the ATM VC Current table.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
atmVcCurrentVpi
The VPI of the VCL.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.2.1.2.2.1.1.1 |
|
atmVcCurrentVci
The VCI of the VCL.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.2.1.2.2.1.1.2 |
|
atmVcCurrentRxCellsClp01
The counter associated with the number of transmitted
cells, encountered by the VCL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Constraints: range: 1-96Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.1.1.3 |
|
atmVcCurrentRxCellsClp0
The counter associated with the number of received
cells, encountered by the VCL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.1.1.4 |
|
atmVcCurrentGcra0Violations
The counter associated with the number of cells
violating GCRA0, encountered by the VCL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.1.1.5 |
|
atmVcCurrentGcra1Violations
The counter associated with the number of cells
violating GCRA1, encountered by the VCL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.1.1.6 |
|
atmVcCurrentRxAIS
The counter associated with the number of received
AIS cells, encountered by the VCL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.1.1.7 |
|
atmVcCurrentTxAIS
The counter associated with the number of transmitted
AIS cells, encountered by the VCL of this ATM interface in the current 15 minute interval. Not Supported in the first phase. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.1.1.8 |
|
atmVcCurrentRxRDI
The counter associated with the number of received
RDI cells, encountered by the VCL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.1.1.9 |
|
atmVcCurrentTxRDI
The counter associated with the number of transmitted
RDI cells, encountered by the VCL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.1.1.10 |
|
atmVcCurrentContinuityLoss
The counter associated with the number of loss of
continuity cells, encountered by the VCL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.1.1.11 |
|
atmVcCurrentUAS
The counter associated with the number of Unavailable
Seconds, encountered by the VCL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.1.1.12 |
|
atmVcCurrentSES
The counter associated with the number of Severerly Errored
Seconds, encountered by the VCL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.1.1.13 |
|
atmVcCurrentCDC
Amount of cells dropped in the current 15 minute interval
of the VC connection. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.1.1.14 |
|
atmVcCurrentTotalDiscards
The total number of valid ATM cells discarded by
the traffic policing entity. This includes cells originally received with CLP=0 and CLP=1. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.1.1.15 |
|
atmVcCurrentClp0Discards
The total number of valid ATM cells received with
CLP=0 an discarded by the traffic policing entity. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.1.1.16 |
|
atmVcCurrentTotalCellOuts
The total number of valid ATM cells transmitted
by this VPL. This includes both CLP=0 and CLP=1 cells. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.1.1.17 |
|
atmVcCurrentClp0CellOuts
The total number of valid ATM cells transmitted
with CLP=0 by this VPL. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.1.1.18 |
|
atmVcCurrentTaggedOuts
The total number of valid ATM cells tagged by the
traffic policing entity from CLP=0 to CLP=1 and transmitted by this VPL. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.1.1.19 |
|
atmVcCurrentPCR
The maximum traffic rate encountered in the last
interval of the VC connection (monitored once a second). |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.1.1.20 |
|
atmVcCurrentSCR
The average traffic rate during the last interval
of the VC connection. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.1.1.21 |
|
atmVcCurrentMCR
MCR - The minimum traffic rate encountered in the last
interval of the VC connection (monitored once a second). |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.1.1.22 |
|
atmVcCurrentShaperTotalDiscards
The total number of cells (CLP0 and CLP1) discarded
due to congestion by the traffic shaper. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.1.1.23 |
|
atmVcCurrentShaperClp0Discards
The total number of CLP0 cells discarded
due to congestion by the traffic shaper. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.1.1.24 |
|
atmVcCurrentShaperClp1Discards
The total number of CLP1 cells discarded
due to congestion by the traffic shaper. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.1.1.25 |
atmVcPMCurrentTable
table.1.3.6.1.4.1.164.12.2.1.2.2.2
·
1 row entry
·
17 columns
The ATM VC Current table for Performance Management.
An entry in the ATM VC Current table for Performance
Management.
Management.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
atmVcPMCurrentVpi
The VPI of the VCL.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.2.1.2.2.2.1.1 |
||||
|
atmVcPMCurrentVci
The VCI of the VCL.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.2.1.2.2.2.1.2 |
||||
|
atmVcPMCurrentDir
The direction of Performance Management.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.2.1.2.2.2.1.3 |
||||
|
atmVcPMCurrentTxClp01
The counter associated with the number of transmitted
CLP 0+1 cells, encountered by the VCL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.2.1.4 |
||||
|
atmVcPMCurrentTxClp0
The counter associated with the number of transmitted
CLP 0 cells, encountered by the VCL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Constraints: range: 1-96Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.2.1.5 |
||||
|
atmVcPMCurrentRxClp01
The counter associated with the number of received
CLP 0+1 cells, encountered by the VCL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.2.1.6 |
||||
|
atmVcPMCurrentRxClp0
The counter associated with the number of received
CLP 0 cells, encountered by the VCL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.2.1.7 |
||||
|
atmVcPMCurrentErroredCells
The counter associated with the number of errored
cells, encountered by the VCL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.2.1.8 |
||||
|
atmVcPMCurrentLostCells
The counter associated with the number of lost
cells, encountered by the VCL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.2.1.9 |
||||
|
atmVcPMCurrentMisinsertedCells
The counter associated with the number of misinserted
cells, encountered by the VCL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.2.1.10 |
||||
|
atmVcPMCurrentECB
The counter associated with the number of ECBs
encountered by the VCL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.2.1.11 |
||||
|
atmVcPMCurrentSECB
The counter associated with the number of SECBs
encountered by the VCL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.2.1.12 |
||||
|
atmVcPMCurrentES
The counter associated with the number of
Errored Seconds, encountered by the VCL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.2.1.13 |
||||
|
atmVcPMCurrentSES
The counter associated with the number of Severely
Errored Seconds, encountered by the VCL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.2.1.14 |
||||
|
atmVcPMCurrentUAS
The counter associated with the number of Severely
Errored Seconds, encountered by the VCL of this ATM interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.2.1.15 |
||||
|
atmVcPMCurrentIntervalQuality
If the number of errors per interval is superior to
the atmNteUPLTCR value, the quality of service of the interval is declared as unacceptable. |
Enumeration | .1.3.6.1.4.1.164.12.2.1.2.2.2.1.16 |
||||
|
atmVcPMCurrentLastDayQuality
If the number of errors per 24 hours is superior to
the atmNteDPLTCR value, the quality of service of the day is declared as degraded. |
Enumeration | .1.3.6.1.4.1.164.12.2.1.2.2.2.1.17 |
atmVcIntervalTable
table.1.3.6.1.4.1.164.12.2.1.2.2.3
·
1 row entry
·
26 columns
The ATM Vc Interval table.
An entry in the ATM Vc Interval table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
atmVcIntervalVpi
The VPI of the VCL.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.2.1.2.2.3.1.1 |
||||||||
|
atmVcIntervalVci
The VCI of the VCL.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.2.1.2.2.3.1.2 |
||||||||
|
atmVcIntervalNumber
A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid). |
Integer32 | .1.3.6.1.4.1.164.12.2.1.2.2.3.1.3 |
||||||||
|
atmVcIntervalRxCellsClp01
The counter associated with the number of transmitted
cells , encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.3.1.4 |
||||||||
|
atmVcIntervalRxCellsClp0
The counter associated with the number of received
cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.3.1.5 |
||||||||
|
atmVcIntervalGcra0Violations
The counter associated with the number of
cells violating GCRA0, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.3.1.6 |
||||||||
|
atmVcIntervalGcra1Violations
The counter associated with the number of
cells violating GCRA1, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.3.1.7 |
||||||||
|
atmVcIntervalRxAIS
The counter associated with the number of received
AIS cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.3.1.8 |
||||||||
|
atmVcIntervalTxAIS
The counter associated with the number of transmitted
AIS cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. Not supported in the first phase. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.3.1.9 |
||||||||
|
atmVcIntervalRxRDI
The counter associated with the number of received
RDI cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.3.1.10 |
||||||||
|
atmVcIntervalTxRDI
The counter associated with the number of transmitted
RDI cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.3.1.11 |
||||||||
|
atmVcIntervalContinuityLoss
The counter associated with the number of Continuity
Loss cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.3.1.12 |
||||||||
|
atmVcIntervalUAS
The counter associated with the number of Unavailable
Seconds, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.3.1.13 |
||||||||
|
atmVcIntervalSES
The counter associated with the number of Severerly Errored
Seconds, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.3.1.14 |
||||||||
|
atmVcIntervalCDC
Amount of cells dropped in the 15 minute interval
of the VC connection. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.3.1.15 |
||||||||
|
atmVcIntervalTotalDiscards
The total number of valid ATM cells discarded by
the traffic policing entity. This includes cells originally received with CLP=0 and CLP=1. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.3.1.16 |
||||||||
|
atmVcIntervalClp0Discards
The total number of valid ATM cells received with
CLP=0 an discarded by the traffic policing entity. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.3.1.17 |
||||||||
|
atmVcIntervalTotalCellOuts
The total number of valid ATM cells transmitted
by this VPL. This includes both CLP=0 and CLP=1 cells. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.3.1.18 |
||||||||
|
atmVcIntervalClp0CellOuts
The total number of valid ATM cells transmitted
with CLP=0 by this VPL. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.3.1.19 |
||||||||
|
atmVcIntervalTaggedOuts
The total number of valid ATM cells tagged by the
traffic policing entity from CLP=0 to CLP=1 and transmitted by this VPL. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.3.1.20 |
||||||||
|
atmVcIntervalPCR
The maximum traffic rate encountered in the
last interval of the VC connection (monitored once a second) encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.3.1.21 |
||||||||
|
atmVcIntervalSCR
The average traffic rate during the last interval
of the VC connection, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.3.1.22 |
||||||||
|
atmVcIntervalMCR
MCR - The minimum traffic rate encountered in the last
interval of the VC connection (monitored once a second) encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.3.1.23 |
||||||||
|
atmVcIntervalShaperTotalDiscards
The total number of cells (CLP0 and CLP1) discarded
due to congestion by the traffic shaper. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.3.1.24 |
||||||||
|
atmVcIntervalShaperClp0Discards
The total number of CLP0 cells discarded
due to congestion by the traffic shaper. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.3.1.25 |
||||||||
|
atmVcIntervalShaperClp1Discards
The total number of CLP1 cells discarded
due to congestion by the traffic shaper. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.3.1.26 |
atmVcPMIntervalTable
table.1.3.6.1.4.1.164.12.2.1.2.2.4
·
1 row entry
·
18 columns
The ATM Vc Interval table for Performance Management.
An entry in the ATM Vc Interval table for Performance
Management.
Management.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
atmVcPMIntervalVpi
The VPI of the VCL.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.2.1.2.2.4.1.1 |
|
atmVcPMIntervalVci
The VCI of the VCL.
|
SNMPv2-SMIInteger32 Constraints: range: 1-96Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.2.1.2.2.4.1.2 |
|
atmVcPMIntervalDir
The direction of Performance Management.
|
Enumeration | .1.3.6.1.4.1.164.12.2.1.2.2.4.1.3 |
|
atmVcPMIntervalNumber
A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid). |
Integer32 | .1.3.6.1.4.1.164.12.2.1.2.2.4.1.4 |
|
atmVcPMIntervalTxClp01
The counter associated with the number of transmitted
CLP 0+1 cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.4.1.5 |
|
atmVcPMIntervalTxClp0
The counter associated with the number of transmitted
CLP 0 cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.4.1.6 |
|
atmVcPMIntervalRxClp01
The counter associated with the number of received
CLP 0+1 cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.4.1.7 |
|
atmVcPMIntervalRxClp0
The counter associated with the number of received
CLP 0 cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.4.1.8 |
|
atmVcPMIntervalErroredCells
The counter associated with the number of Errored
cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.4.1.9 |
|
atmVcPMIntervalLostCells
The counter associated with the number of Lost
cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.4.1.10 |
|
atmVcPMIntervalMisinsertedCells
The counter associated with the number of Misinserted
cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.4.1.11 |
|
atmVcPMIntervalECB
The counter associated with the number of ECBs
encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Constraints: range: 1-2048Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.4.1.12 |
|
atmVcPMIntervalSECB
The counter associated with the number of SECBs
encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Constraints: range: 80-80Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.4.1.13 |
|
atmVcPMIntervalES
The counter associated with the number of Errored
Seconds, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.4.1.14 |
|
atmVcPMIntervalSES
The counter associated with the number of Severely
Errored Seconds, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.4.1.15 |
|
atmVcPMIntervalUAS
The counter associated with the number of Unavailable
Seconds, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.4.1.16 |
|
atmVcPMIntervalQuality
If the number of errors per interval is superior to
the atmNteUPLTCR value, the quality of service of the interval is declared as unacceptable. |
Enumeration | .1.3.6.1.4.1.164.12.2.1.2.2.4.1.17 |
|
atmVcPMIntervalLastDayQuality
If the number of errors per 24 hours is superior to
the atmNteDPLTCR value, the quality of service of the day is declared as degraded. |
Enumeration | .1.3.6.1.4.1.164.12.2.1.2.2.4.1.18 |
atmCESAAL1StatsTable
table.1.3.6.1.4.1.164.12.2.1.2.2.5
·
1 row entry
·
5 columns
This table shows statistics of the structured Circuit-Emulation connections.
defines an entry in the atmCESAAL1StatsTable
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
atmCESAAL1SeqErrors
number of cells discarded due to wrong sequence number
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.5.1.1 |
|
atmCESAAL1HdrErrors
number of cells discarded due to bad AAL1 header error.
this include correctable and uncorrectable CRC, plus bad parity. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.5.1.2 |
|
atmCESAAL1PointerReframes
number of events in which the AAL1 reassembler found that an SDT pointer isn't
where it is expected, and the pointer must be reacquired. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.5.1.3 |
|
atmCESAAL1BufUnderflows
number of buffer underflows events.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.5.1.4 |
|
atmCESAAL1BufOverflows
number of buffer overflows events.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.5.1.5 |
atmVcQoSTable
table.1.3.6.1.4.1.164.12.2.1.2.2.6
·
1 row entry
·
3 columns
The ATM VP QoS table.
An entry in the ATM VP table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
atmVcQoSPeriodRef
This object is an index that specifies which period of time, the next
2 objects refer to. currentPeriod - the period since last systemResetAllStatsCmd received or since Start-up (if no systemResetAllS… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.12.2.1.2.2.6.1.1 |
||||
|
atmVcQoSElapsedTime
Elapsed Time in seconds.
- for atmVcQoSPeriodRef = currentPeriod: The period since last systemResetAllStatsCmd received or since Start-up (if no systemResetAllStatsCmd was received since Start-up) until now. - for … |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.2.1.2.2.6.1.2 |
||||
|
atmVcQoSUAS
Number of Unavailable Seconds for the reference period (atmVcQoSPeriodRef).
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.6.1.3 |
atmVcPMQoSTable
table.1.3.6.1.4.1.164.12.2.1.2.2.7
·
1 row entry
·
5 columns
The PM VC QoS table.
An entry in the VC PM QoS table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
atmVcPMQoSDirection
The direction of performance management.
|
Enumeration | .1.3.6.1.4.1.164.12.2.1.2.2.7.1.1 |
||||
|
atmVcPMQoSPeriodRef
This object is an index that specifies which period of time, the next
5 objects refer to. currentPeriod - the period since last systemResetAllStatsCmd received or since Start-up (if no systemResetAllStat… |
Enumeration | .1.3.6.1.4.1.164.12.2.1.2.2.7.1.2 |
||||
|
atmVcPMQoSCLR
Cell Loss Ratio counter for the reference period (atmVcPMQoSPeriodRef)-
defined in accordance with I.356 , in %. The value will be multipuled by 100. |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.7.1.3 |
||||
|
atmVcPMQoSCER
Cell Error Ratio counter for the reference period (atmVcPMQoSPeriodRef)
defined in accordance with I.356 , in %. The value will be multipuled by 100. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.7.1.4 |
||||
|
atmVcPMQoSCMR
Cell Miss-insertion Ratio counter for the reference period (atmVcPMQoSPeriodRef)
defined in accordance with I.356 , cells/sec . |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.7.1.5 |
atmVcShaperStatTable
table.1.3.6.1.4.1.164.12.2.1.2.2.8
·
1 row entry
·
6 columns
The ATM VC shaper statistics table.
An entry in the ATM VC shaper statistics table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
atmVcShaperDiscarded
The number of Cells that were discarded in the shaper on that VCC due
to buffer overflow. This counter counts till it reaches its MAX value (20 bits) and then rolls over. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.8.1.1 |
|
atmVcShaperOccupation
The number of Cells that are currently stored in the buffer.
This parameter is limited to 20 bits. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.2.1.2.2.8.1.2 |
|
atmVcShaperMaxOccupation
The Maximum number of Cells that were stored in the buffer,
since this VC was activated. This parameter is limited to 20 bits. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.2.1.2.2.8.1.3 |
|
atmVcShaperLevel
The occupation of the buffer according to a predefined threshold.
empty - buffer is Empty full - buffer is Full below - buffer is Below the threshold above - buffer is Above the threshold. This is also the trigger to … |
Enumeration | .1.3.6.1.4.1.164.12.2.1.2.2.8.1.4 |
|
atmVcShaperEpdDropped
The number of Cells that were dropped in the shaper on that VCC
due to EPD\PPD mechanism in the last second. This parameter is limited to 24 bits. Applicable for a EPD/PPD VC only. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.8.1.5 |
|
atmVcShaperTotalEpdDropped
The Total number of Cells that were dropped in the shaper on that
VPC due to EPD\PPD mechanism in the last 15 minutes. This counter automatically reset itself every 15 minutes. Applicable for a EPD/PPD VC only. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.1.2.2.8.1.6 |
atmIntervalDateTable
table.1.3.6.1.4.1.164.12.2.1.3
·
1 row entry
·
3 columns
The agent will keep in this group the date & time corresponding to each interval.
The date & time for the given interval.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
atmIntervalDateInterval
The interval number defining this entry.
|
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.12.2.1.3.1.1 |
||||
|
atmIntervalDateDate
The date corresponding to this interval.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.12.2.1.3.1.2 |
||||
|
atmIntervalDateTime
The time corresponding to this interval.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.12.2.1.3.1.3 |
atmGenSysSelfTestTable
table.1.3.6.1.4.1.164.12.2.2.1.1
·
1 row entry
·
3 columns
A table containing the results of the initial testing of the device.
An entry in table.
Indexes
atmNteOamMode atmNteOamCellType atmNteOamLevel
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
atmGenSysSelfTestIndex
A running index for the table.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.2.2.1.1.1.1 |
||||
|
atmGenSysSelfTestResult
The results of the initial testing of the device.
|
SNMPv2-TCDisplayString Enumerated Values:
Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.12.2.2.1.1.1.2 |
||||
|
atmGenSysSelfTestModule
The name of module on which the test was performed.
|
SNMPv2-TCDisplayString Enumerated Values:
Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.12.2.2.1.1.1.3 |
atmGenSysLogTable
table.1.3.6.1.4.1.164.12.2.2.1.3
·
1 row entry
·
2 columns
A copy of the log buffer.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
atmGenSysLogIndex
The index of the log buffer.
|
Integer32 | .1.3.6.1.4.1.164.12.2.2.1.3.1.1 |
|
atmGenSysLogMessage
The log buffer entry message text.
|
OctetString | .1.3.6.1.4.1.164.12.2.2.1.3.1.2 |
atmGenSysCxRefTable
table.1.3.6.1.4.1.164.12.2.2.1.5
·
1 row entry
·
2 columns
A Cross Reference table. The table maintains
an index of an object which is also the table index,
and a counter that indicates how many times this
object was referenced.
When using this table for more than one referenced table,
which uses the same range of indexes, then the index
should be shifted by a unique offset per table.
In ACE2002 this table is used for TD and for FR Desc. Thus,
the index for FR Descriptor is: FR Descriptor index + offset.
The offset is described in the ACE2002 NMS SRS.
The entries will be added by the agent upon
an entry addition in the referenced tables
(TD table, FR Descriptor etc.)
an entry addition in the referenced tables
(TD table, FR Descriptor etc.)
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
atmGenSysCxRefIndex
The index specifies an entry in the table of the object.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.2.2.1.5.1.1 |
||||
|
atmGenSysCxRefCounter
The counter counts the number of references
that have been made to the object . |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.2.2.1.5.1.2 |
atmNteManagerTable
table.1.3.6.1.4.1.164.12.3.1.1.1
·
1 row entry
·
13 columns
The Manager Table includes all the NMSs that receive traps from this agent. A single manager can receive traps on more than one PVC. The agent will set implicitly the correct ifIndex, VPI, VCI values to all relevant entries in the table when the user changes them for one of the PVCs.
A single manager and the PVC for receiving traps.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
atmNteManagerIP
The IP address of the NMS.
|
RFC1155-SMIIpAddress Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.12.3.1.1.1.1.1 |
||||||||||||
|
atmNteManagerPvc
A PVC index. The range is 1..8. There are four PVCs
on the User Port and four PVCs on the Network Port. The default VPI, VCI values are specified below. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.1.1.1.1.2 |
||||||||||||
|
atmNteManagerIfIndex
The ATM interface index of the management port.
|
SNMPv2-SMIInteger32r/w Constraints: range: 1-64Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.1.1.1.1.3 |
||||||||||||
|
atmNteManagerVpi
The VPI of the management VCL. Default: 0.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.1.1.1.1.4 |
||||||||||||
|
atmNteManagerVci
The VCI of the management VCL. Defaults: 32,33,34,35.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.1.1.1.1.5 |
||||||||||||
|
atmNteManagerTrapMask
The value of this attribute determines the type of traps the
agent should mask and not send to this NMS. The value is differently determined for different products. There are mainly two methods: - an integer number, … |
SNMPv2-SMIInteger32r/w Constraints: range: 1-64Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.1.1.1.1.6 |
||||||||||||
|
atmNteManagerRowStatus
Creation/Deletion of rows in the table.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.12.3.1.1.1.1.7 |
||||||||||||
|
atmNteManagerNextHop
This parameter is relevant to Ethernet out of band
host only (PVC=10). The Next Hop IP address of the entry route. |
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.12.3.1.1.1.1.8 |
||||||||||||
|
atmNteManagerVlanSupport
VLAN support (Tagging).
no - No support to VLAN. yes - 4 VLAN bytes will be added to the frame. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.12.3.1.1.1.1.9 |
||||||||||||
|
atmNteManagerVlanIdentifier
VLAN ID. Range is 0..4095.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.1.1.1.1.10 |
||||||||||||
|
atmNteManagerVlanFramePriority
VLAN Frame priority.Range is 0..7.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.1.1.1.1.11 |
||||||||||||
|
atmNteManagerAlarmTrapMask
The value of this object determines the alarm traps that the
agent should mask and not send to this NMS. The value is an Octet String, where each bit is assigned to a certain trap. If the bit = 1, the t… |
OctetStringr/w | .1.3.6.1.4.1.164.12.3.1.1.1.1.12 |
||||||||||||
|
atmNteManagerConfigPorts
This variable defines from which port/s this manager can configure the device.
For IPmux 11 the value of this variable will be according to the ports combination: Network =1 User1=2 User2=4 (For Example: All ports = 7). |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.1.1.1.1.13 |
atmNteConfOamIfTable
table.1.3.6.1.4.1.164.12.3.1.1.9.4
·
1 row entry
·
1 columns
OAM support per ATM interface.
.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
atmNteConfOamIfAisRdi
This parameter controls the generation of F4/F5
AIS and RDI due to lower order problems such as physical layer problems. For AIS: Defines if F4/F5 AIS cell is transmitted due to problems such as physic… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.12.3.1.1.9.4.1.1 |
atmNteHostIfTable
table.1.3.6.1.4.1.164.12.3.1.1.11
·
1 row entry
·
13 columns
Host IP interface table.
.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
atmNteHostPvcIndex
A PVC index. The range is 1..10.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.1.1.11.1.1 |
||||||||||||||||||||||||||||||||||||||
|
atmNteHostIP
The host interface IP address.
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.12.3.1.1.11.1.2 |
||||||||||||||||||||||||||||||||||||||
|
atmNteHostMask
The host interface subnet mask.
|
RFC1155-SMIIpAddressr/w Constraints: range: 1-96Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.12.3.1.1.11.1.3 |
||||||||||||||||||||||||||||||||||||||
|
atmNteHostAtmIfIndex
ATM interface index. Will be 1
for user port, and 2 for network port. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.1.1.11.1.4 |
||||||||||||||||||||||||||||||||||||||
|
atmNteHostVpi
VPI of the PVC connected to that host interface.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.1.1.11.1.5 |
||||||||||||||||||||||||||||||||||||||
|
atmNteHostVci
VCI of the PVC connected to that host interface.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.1.1.11.1.6 |
||||||||||||||||||||||||||||||||||||||
|
atmNteHostRowStatus
Creation/Deletion of rows in the table.
|
SNMPv2-TCRowStatusr/w Enumerated Values:
Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.12.3.1.1.11.1.7 |
||||||||||||||||||||||||||||||||||||||
|
atmNteHostRdnVpi
The VPI of the redundant management VCL.
This parameter is applicable only if atmNteRdnManagement=enable(3). |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.1.1.11.1.8 |
||||||||||||||||||||||||||||||||||||||
|
atmNteHostRdnVci
The VCI of the redundant management VCL.
This parameter is applicable only if atmNteRdnManagement=enable(3). |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.1.1.11.1.9 |
||||||||||||||||||||||||||||||||||||||
|
atmNteHostDefaultNextHop
The host interface Default Next Hop address.
This address will be used as default next hop for every Bundle mapped to this Host. |
RFC1155-SMIIpAddressr/w Enumerated Values:
Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.12.3.1.1.11.1.10 |
||||||||||||||||||||||||||||||||||||||
|
atmNteHostVlanTagging
VLAN Tag support.
no - No support to VLAN. yes - 4 VLAN bytes will be added to each frame connected to this Host. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.12.3.1.1.11.1.11 |
||||||||||||||||||||||||||||||||||||||
|
atmNteHostDefaultVlanID
Default VLAN ID of this Host.
|
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.1.1.11.1.12 |
||||||||||||||||||||||||||||||||||||||
|
atmNteHostDefaultVlanPriority
Default VLAN priority for this Host.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.1.1.11.1.13 |
atmNteOamTable
table.1.3.6.1.4.1.164.12.3.1.1.26
·
1 row entry
·
4 columns
This table is a static table, which is created by agent once upon initialization. The created entries are actually, only the supported OAM features. This table enables addition of new features by adding new entries rather than adding scalar parameters. An OAM feature is defined by the indexes values combination.
An entry in the OAM table.
Each entry in this table will indicate a special OAM.
Each entry in this table will indicate a special OAM.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
atmNteOamMode
The OAM cell path.
endToEnd(1) - the entire path. |
Enumeration | .1.3.6.1.4.1.164.12.3.1.1.26.1.1 |
||||||||
|
atmNteOamCellType
This object indicates a unique Indication Signal.
aisAndRdi(1) - Alarm Indication Signal (AIS) and Remote Defect Indication (RDI) cell. loopback(2) - Loopback cell. |
Enumeration | .1.3.6.1.4.1.164.12.3.1.1.26.1.2 |
||||||||
|
atmNteOamLevel
The level of the OAM cell.
-- f4 (2) - VP level, f5 (3) - VC level. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.12.3.1.1.26.1.3 |
||||||||
|
atmNteOamEnable
This parameter determines if the specified OAM cells
will be enabled. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.12.3.1.1.26.1.4 |
atmAlarmForwardingTable
table.1.3.6.1.4.1.164.12.3.1.1.32
·
1 row entry
·
7 columns
The Alarm Forwarding Mechanism will be operated for this table entries.
Each entry in this table is a pair of ports that
the Alarm Forwarding Mechanism is determined for.
the Alarm Forwarding Mechanism is determined for.
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
atmAlarmForwardingFailPort
An Index of the port on which a fail occurs.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.1.1.32.1.1 |
||||||||||||
|
atmAlarmForwardingToPort
An Index of the port that will be affected
upon the failure of the atmAlarmForwardingFailPort. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.1.1.32.1.2 |
||||||||||||
|
atmAlarmForwardingRowStatus
Creation/Deletion of rows in the table.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.12.3.1.1.32.1.3 |
||||||||||||
|
atmAlarmForwardingFailureLevel
This parameter determines the level of failure
that will operate the Alarm Forwarding Mechanism. |
Bitsr/w | .1.3.6.1.4.1.164.12.3.1.1.32.1.4 |
||||||||||||
|
atmAlarmForwardingRecoveryMode
This parameter determines the Recovery Mode.
manual - The user should stop the RDI transmission by using the atmAlarmForwardingRecoveryCommand. automatic - The RDI transmission will be automatically … |
Enumerationr/w | .1.3.6.1.4.1.164.12.3.1.1.32.1.5 |
||||||||||||
|
atmAlarmForwardingRecoveryCommand
This parameter is a command. It is applicable when
atmAlarmForwardingRecoveryMode = manual. on - Will stop the RDI transmission. After setting to 'On' the agent will set this parameter back to 'Off'. |
Enumerationr/w | .1.3.6.1.4.1.164.12.3.1.1.32.1.6 |
||||||||||||
|
atmAlarmForwardingTimeFilterWindow
This parameter determines the Time Filter Window, meaning:
how much time (in seconds) should the alarm exist in order to start the Alarm Forwarding operation. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.3.1.1.32.1.7 |
.1.3.6.1.4.1.164.12.3.1.1.34
·
1 row entry
·
1 columns
An extension to the ATM VP Cross Connect table (RFC2515 - atmVpCrossConnectTable).
An entry in the table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
atmVpCrossConnectName
The Connection's name.
|
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.12.3.1.1.34.1.1 |
.1.3.6.1.4.1.164.12.3.1.1.35
·
1 row entry
·
1 columns
An extension to the ATM VC Cross Connect table (RFC2515 - atmVcCrossConnectTable).
An entry in the table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
atmVcCrossConnectName
The Connection's name.
|
OctetStringr/w | .1.3.6.1.4.1.164.12.3.1.1.35.1.1 |
.1.3.6.1.4.1.164.12.3.1.1.38
·
1 row entry
·
1 columns
An Augment to ATM Traffic Descriptor Parameter Table (atmTrafficDescrParamTable in ATM-MIB; RFC-2515).
An entry in the table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
atmTrafficDescrParamMode
The Mode of the Traffic Descriptor.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.12.3.1.1.38.1.1 |
atmNteIdTable
table.1.3.6.1.4.1.164.12.3.1.2.1
·
1 row entry
·
7 columns
The IDs of the cards and of the system.
.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
atmNteIdIndex
An Index of the Unit ID table.
The following units have IDs in this table: 1 - System 2 - ATM Board 3 - User Card 4 - Trunk 1 card 5 - Trunk 2 card 6 - Shaper 7 - Clock Unit 8 - Slot 1 card 9 - Slot 2 card 10 - S… |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.1.2.1.1.1 |
||||||||||||||||
|
atmNteUnitId
The ID of the Unit.
For index = 6, the id will describe the validity of a shaper in the system: 0 - Shaper Not exist 1 - Shaper exist. For index = 7, the id will describe the validity of a… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.1.2.1.1.2 |
||||||||||||||||
|
atmNteUnitVersion
Hardware and Software version
of the module. |
SNMPv2-TCDisplayString Enumerated Values:
Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.12.3.1.2.1.1.3 |
||||||||||||||||
|
atmNteCardType
The card type.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.12.3.1.2.1.1.4 |
||||||||||||||||
|
atmNteCardStatus
Status of the card in the selected slot.
notActive - Connections are in NotReady state. No configuration is available for the card. The access to the card HW is blocked. … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.12.3.1.2.1.1.5 |
||||||||||||||||
|
atmNteCardCmd
Command on the card that is installed in the selected slot.
The commands are applicable according to the value of atmNteCardStatus. See the specification document for details. deleteConfig - Deletes the c… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.12.3.1.2.1.1.6 |
||||||||||||||||
|
atmNteProgCardType
The programmed card type.
|
Enumerationr/w | .1.3.6.1.4.1.164.12.3.1.2.1.1.7 |
atmSysIntervalTable
table.1.3.6.1.4.1.164.12.3.1.2.8.2
·
1 row entry
·
2 columns
The system level Interval table.
.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
atmSysIntervalNumber
A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid). |
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.12.3.1.2.8.2.1.1 |
||||||||||||
|
atmSysIntervalCdc
Seconds in which cells dropped was occured in
15 minutes interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.3.1.2.8.2.1.2 |
atmNteConfIfTable
table.1.3.6.1.4.1.164.12.3.2.1.1
·
1 row entry
·
13 columns
The Physical interface configuration table.
An entry in the Physical interface configuration table.
The ifIndex is of the lowest physical layer.
The ifIndex is of the lowest physical layer.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
atmConfIfTransmitClk
The transmit clock of the port.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.12.3.2.1.1.1.1 |
||||||||||||||||||||
|
atmConfIfLoopback
Interface Loopback.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.12.3.2.1.1.1.2 |
||||||||||||||||||||
|
atmConfIfFrameType
The frame type. Valid values for a 155M interface:
sonet(2), sdh(3). Valid values for a T3 interface: direct(4), plcpInternal(5), plcpExternal(6), directNoScrmbling(10), plcpInternalNoScrmbling(11), plcpExternalNoScrmb… |
Enumerationr/w Constraints: range: 2-20 |
.1.3.6.1.4.1.164.12.3.2.1.1.1.3 |
||||||||||||||||||||
|
atmConfIfCardType
deprecated
The card type.
|
Enumeration | .1.3.6.1.4.1.164.12.3.2.1.1.1.4 |
||||||||||||||||||||
|
atmConfAtmIfVpiVciLimit
The limit on the sum of the VPI+VCI bits for this interface.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.12.3.2.1.1.1.5 |
||||||||||||||||||||
|
atmConfIfHwFeatures
HW features command.
|
Enumerationr/w | .1.3.6.1.4.1.164.12.3.2.1.1.1.6 |
||||||||||||||||||||
|
atmConfIfOutputRate
This parameter indicates the output rate in cells/sec, which is
supported per port. Successfully setting this parameter is dependent on all other ports values calculations, which are described in the NMS SRS. |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.1.1.1.7 |
||||||||||||||||||||
|
atmConfIfInputRate
This parameter indicates the input rate in cells/sec, which is
supported per port. Successfully setting this parameter is dependent on all other ports values calculations, which are described in the NMS SRS. |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.1.1.1.8 |
||||||||||||||||||||
|
atmConfAlarmForwarding
Enables Path AIS Alarm forwarding upon a failure detection. The
following might be considered as a failure: LOS, LOF, LOC, SLM, LOP, Path AIS and Line AIS. disable(2) - will not forward an alarm upon a… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.12.3.2.1.1.1.9 |
||||||||||||||||||||
|
atmConfIfAllocatedBw
Total VC Bandwidth Allocation.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.1.1.1.10 |
||||||||||||||||||||
|
atmConfIfLowerVpi
The Lower possible VPI.
|
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.1.1.1.11 |
||||||||||||||||||||
|
atmConfIfOamMode
OAM support Mode, which determines the
interface's location in a segment wise. |
Enumerationr/w | .1.3.6.1.4.1.164.12.3.2.1.1.1.12 |
||||||||||||||||||||
|
atmConfIfOamFailureInd
This object allows user to define the type of indication
(if any) that will be created upon a LB cell failure, for all VCs on which OAM loopback traffic is activated. disabled(2) - no indication will be created. … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.12.3.2.1.1.1.13 |
atmNteAlarmIfTable
table.1.3.6.1.4.1.164.12.3.2.1.2
·
1 row entry
·
11 columns
The interface Alarm table.
An entry in the interface Alarm table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
atmInterfaceActiveAlarms
A Bit String of the active alarms on this interface.
An up bit (1) means there is an active alarm of this type. A down bit (0) means there is no such alarm. The meaning of the bits is as follows: 1 - LOS 2 - LOF 3 - Lin… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.1.2.1.1 |
|
atmThresholdSectionBIP
When Section BIPs are greater than this threshold,
an active alarm is raised. N/A for ds3/e3 interface. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.1.2.1.2 |
|
atmThresholdLineBIP
When Line BIPs are greater than this threshold,
an active alarm is raised. N/A for ds3/e3 interface. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.1.2.1.3 |
|
atmThresholdLineFEBE
When Line FEBEs are greater than this threshold,
an active alarm is raised. N/A for ds3/e3 interface. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.1.2.1.4 |
|
atmThresholdPathBIP
When Path BIPs are greater than this threshold,
an active alarm is raised. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.1.2.1.5 |
|
atmThresholdPathFEBE
When Path FEBEs are greater than this threshold,
an active alarm is raised. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.1.2.1.6 |
|
atmThresholdErroredCells
When Errored Cells are greater than this threshold,
an active alarm is raised. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.1.2.1.7 |
|
atmThresholdLostCells
When Lost Cells are greater than this threshold,
an active alarm is raised. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.1.2.1.8 |
|
atmThresholdMisinsertedCells
When Misinserted Cells are greater than this threshold,
an active alarm is raised. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.1.2.1.9 |
|
atmInterfaceAlarmStatus
The variable is on(3) when there is any active alarm
on this interface. |
Enumeration | .1.3.6.1.4.1.164.12.3.2.1.2.1.10 |
|
atmInterfaceMaskAlarms
A Bit String of alarms mask on this interface.
An up bit (1) means that the respective alarm is masked. A down bit (0) means no mask. The mask is supported for the following alarms: 1 - LOS |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.1.2.1.11 |
atmNteConfVpTable
table.1.3.6.1.4.1.164.12.3.2.1.3
·
1 row entry
·
15 columns
The ATM VP configuration table. The table is an extension to the atmVplTable of RFC-1695.
An entry in the ATM VP configuration table.
ifIndex of the ATM layer.
ifIndex of the ATM layer.
Indexes
atmLoopbackVpIfIndex atmLoopbackVpVpi
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
atmConfVpPolicing
Policing method desired for this VPL.
|
Enumerationr/w | .1.3.6.1.4.1.164.12.3.2.1.3.1.1 |
||||||||
|
atmConfVpCCAdminStatus
up(2) - Activate Continuity Check (CC).
down(3) - Deactivate CC. source(4) - Activate OAM CC(Continuity Check) of local agent ( start sending Oam cells to the remote side ). sink(5) - Activat… |
Enumerationr/w | .1.3.6.1.4.1.164.12.3.2.1.3.1.2 |
||||||||
|
atmConfVpLoopbackAdminStatus
up(2) - Start loopback OAM cells.
down(3) - Stop sending loopback OAM cells. For ace2002: up(2) - Transmitting LB cells with llid all ones (i.e. FFFF..FF) down(3) - Not transmitting LB cells.… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.12.3.2.1.3.1.3 |
||||||||
|
atmConfVpLoopbackSinkAddress
Destination address.
For ace101: 2 bytes are used. For ace2002: 16 bytes are used. |
OctetStringr/w | .1.3.6.1.4.1.164.12.3.2.1.3.1.4 |
||||||||
|
atmConfVpCongestionControl
Each bit indicates a selection of one option
as the following description. All combinations are possible and legal. The codes are: 1 - EPD 2 - CLP 4 - EFCI |
OctetStringr/w | .1.3.6.1.4.1.164.12.3.2.1.3.1.5 |
||||||||
|
atmConfVpCCDirection
both(2) - Agent send OAM CC cells and check received OAM CC cells
source(4)- Agent send OAM CC cells. sink(5) - Agent checks received OAM CC cells. |
Enumerationr/w | .1.3.6.1.4.1.164.12.3.2.1.3.1.6 |
||||||||
|
atmConfVpCreationTime
A date-time in which the VP was created.
|
SNMPv2-TCDateAndTime Textual Convention: SNMPv2-TCDateAndTime OctetStringType Constraints: range: 8range: 11 |
.1.3.6.1.4.1.164.12.3.2.1.3.1.7 |
||||||||
|
atmConfVpOamSupport
OAM support mode, which determines the device location
in a segment wise. |
Enumerationr/w | .1.3.6.1.4.1.164.12.3.2.1.3.1.8 |
||||||||
|
atmConfVpCCOperStatus
initial(1) - The CC activation process is not started.
source(4) - Agent sends OAM CC cells. sink(5) - Agent checks received OAM CC cells. both (8) - OAM CC of local and remote agents activation. timeout (9) - Timeo… |
Enumeration | .1.3.6.1.4.1.164.12.3.2.1.3.1.9 |
||||||||
|
atmConfVpLoopbackTraffic
This parameter has both command and status meanings:
off(2) - Set to 'Off' will Stop traffic loop. Getting this value means that the loop is not running. on (3) - Set to 'On' will start traffic loop. Getting … |
Enumerationr/w | .1.3.6.1.4.1.164.12.3.2.1.3.1.10 |
||||||||
|
atmConfVpLoopbackFailureInd
This object allows user to define the Indication that will be created upon
a LB cell failure. disabled(2) - no indication will be created. segmentAis(3) - will cause Tx of a segment AIS. segmentRdi(4) - will cause Tx o… |
Enumerationr/w | .1.3.6.1.4.1.164.12.3.2.1.3.1.11 |
||||||||
|
atmConfVpLoopbackFailureThreshold
The number of the LB failures before starting transmission of the
Indication defined by atmConfVcLoopbackFailureInd. Range: 1..16. Default: 1. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.1.3.1.12 |
||||||||
|
atmConfVpOamDirection
The direction of OAM cell insertion.
downStream(2) - The OAM cell will be inserted in downStream. upStream(3) - The OAM cell will be inserted in upStream. |
Enumerationr/w | .1.3.6.1.4.1.164.12.3.2.1.3.1.13 |
||||||||
|
atmConfVpOamDescrIndex
This parameter indicates the VPL's OAM Descriptor index,
according to the OAM Descriptor Configuration Table. |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.1.3.1.14 |
||||||||
|
atmConfVpConnected
This object indicates whether this VP is connected
and if connected, what is it connected to. |
Enumerationr/w | .1.3.6.1.4.1.164.12.3.2.1.3.1.15 |
atmNteConfVcTable
table.1.3.6.1.4.1.164.12.3.2.1.4
·
1 row entry
·
18 columns
The ATM VC configuration table. The table is an extension to the atmVclTable of RFC-2515.
An entry in the ATM VC configuration table.
ifIndex of the ATM layer.
ifIndex of the ATM layer.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
atmConfVcPolicing
Policing method desired for this VCL.
|
Enumerationr/w | .1.3.6.1.4.1.164.12.3.2.1.4.1.1 |
||||||||
|
atmConfVcCCAdminStatus
up(2) - Activate Continuity Check (CC).
down(3) - Deactivate CC. source(4) - Activate OAM CC(Continuity Check) of local agent ( start sending Oam cells to the remote side ). sink(5) - Activate CC of r… |
Enumerationr/w | .1.3.6.1.4.1.164.12.3.2.1.4.1.2 |
||||||||
|
atmConfVcLoopbackAdminStatus
up(2) - Start loopback OAM cells.
down(3) - Stop sending loopback OAM cells. For ace2002: up(2) - Transmitting LB cells with llid all ones (i.e. FFFF..FF) down(3) - Not transmitting LB cells.… |
Enumerationr/w | .1.3.6.1.4.1.164.12.3.2.1.4.1.3 |
||||||||
|
atmConfVcLoopbackSinkAddress
Destination address.
For ace101: 2 bytes are used. For ace2002: 16 bytes are used. |
OctetStringr/w | .1.3.6.1.4.1.164.12.3.2.1.4.1.4 |
||||||||
|
atmConfVcCongestionControl
Each bit indicates a selection of one option
as the following description. All combinations are possible and legal. The codes are: 1 - EPD 2 - CLP 4 - EFCI. For ace2002: 1 - Packet Discard. |
OctetStringr/w | .1.3.6.1.4.1.164.12.3.2.1.4.1.5 |
||||||||
|
atmConfVcCCDirection
both(2) - Agent sends OAM CC cells and checks received OAM CC cells.
none(3) - Agent does not send and does not check received OAM CC cells. source(4)- Agent sends OAM CC cells. sink(5) - Agent checks received OAM CC … |
Enumerationr/w | .1.3.6.1.4.1.164.12.3.2.1.4.1.6 |
||||||||
|
atmConfVcCreationTime
A date-time in which the VC was created.
|
SNMPv2-TCDateAndTime Constraints: range: 1-96Textual Convention: SNMPv2-TCDateAndTime OctetStringType Constraints: range: 8range: 11 |
.1.3.6.1.4.1.164.12.3.2.1.4.1.7 |
||||||||
|
atmConfVcOamSupport
OAM support mode, which determines the device location
in a segment wise. endToEndAndSegment - In this mode the OAM cells are generated before the ABM (ATM Buffer Mana… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.12.3.2.1.4.1.8 |
||||||||
|
atmConfVcCCActivationCtrl
manual(1) - CC Activation process is disable
activator(2) - ACE-101 initiate CC Activation process listener(3) - ACE-101 wait to CC Activation request from remote side. |
Enumerationr/w | .1.3.6.1.4.1.164.12.3.2.1.4.1.9 |
||||||||
|
atmConfVcCCOperStatus
initial (1) - The CC activation process is not started.
up (2) - Continuity Check (CC) activated. down (3) - CC deactivated. source (4) - OAM CC(Continuity Check) of local agent activated. sink (5) - OAM CC of remo… |
Enumeration | .1.3.6.1.4.1.164.12.3.2.1.4.1.10 |
||||||||
|
atmConfVcLoopbackTraffic
This parameter has both command and status meanings:
off(2) - Set to 'Off' will Stop traffic loop. Getting this value means that the loop is not running. on (3) - Set to 'On' will start traffic loop. Getting … |
Enumerationr/w | .1.3.6.1.4.1.164.12.3.2.1.4.1.11 |
||||||||
|
atmConfVcLoopbackFailureInd
This object allows user to define the Indication that will be created upon
a LB cell failure. disabled(2) - no indication will be created. segmentAis(3) - will cause Tx of a segment AIS. segmentRdi(4) - will cause Tx o… |
Enumerationr/w | .1.3.6.1.4.1.164.12.3.2.1.4.1.12 |
||||||||
|
atmConfVcLoopbackFailureThreshold
The number of the LB failures before starting transmission of the
Indication defined by atmConfVcLoopbackFailureInd. Range: 1..16. Default: 1. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.1.4.1.13 |
||||||||
|
atmConfVcOamDirection
The direction of OAM cell insertion.
downStream(2) - The OAM cell will be inserted in downStream. upStream(3) - The OAM cell will be inserted in upStream. |
Enumerationr/w | .1.3.6.1.4.1.164.12.3.2.1.4.1.14 |
||||||||
|
atmConfVcName
VC Name.
|
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.12.3.2.1.4.1.15 |
||||||||
|
atmConfVcConnected
This object indicates whether this VC is connected
and if connected, what is it connected to. Originally, it was read-only. |
Enumerationr/w | .1.3.6.1.4.1.164.12.3.2.1.4.1.16 |
||||||||
|
atmConfVcOamDescrIndex
This parameter indicates the VCL's OAM Descriptor index,
according to the OAM Descriptor Configuration Table. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.1.4.1.17 |
||||||||
|
atmConfVcNoOfUsages
This object indicates the number of times this VCL is used.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.3.2.1.4.1.18 |
atmNteAlarmVpTable
table.1.3.6.1.4.1.164.12.3.2.1.5
·
1 row entry
·
2 columns
The ATM VP Alarm table.
An entry in the ATM VP Alarm table.
ifIndex of the ATM layer.
ifIndex of the ATM layer.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
atmNteVpAlarmVpi
The VPI on which there is an active alarm.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.1.5.1.1 |
|
atmNteVpActiveAlarms
A Bit String of the active alarms on this VP.
An up bit (1) means there is an active alarm of this type. A down bit (0) means there is no such alarm. The meaning of the bits is as follows: 1 - VP AIS 2 - VP Loss Of Cont… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.1.5.1.2 |
atmNteAlarmVcTable
table.1.3.6.1.4.1.164.12.3.2.1.6
·
1 row entry
·
3 columns
The ATM VC Alarm table.
An entry in the ATM VC Alarm table.
ifIndex of the ATM layer.
ifIndex of the ATM layer.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
atmNteVcAlarmVpi
The VPI of the VC on which there is an active alarm.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.1.6.1.1 |
|
atmNteVcAlarmVci
The VCI of the VC on which there is an active alarm.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.1.6.1.2 |
|
atmNteVcActiveAlarms
A Bit String of the active alarms on this VC.
An up bit (1) means there is an active alarm of this type. A down bit (0) means there is no such alarm. The meaning of the bits is as follows: 1 - VC AIS 2 - VC Loss Of Cont… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.1.6.1.3 |
atmLoopbackVpTable
table.1.3.6.1.4.1.164.12.3.2.2.1
·
1 row entry
·
8 columns
This table contains parameters for an OAM VP loopback test.
An entry in table atmLoopbackVpTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
atmLoopbackVpIfIndex
The interface index of the ATM layer.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.2.1.1.1 |
||||||||
|
atmLoopbackVpVpi
The VPI of the OAM VPL.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.2.1.1.2 |
||||||||
|
atmLoopbackVpOperStatus
-noActive(1) means that the loopback test has not been activated for this VP.
-inProgress(2) means that the test has been activated and there is currently no problem. -failed(3) means there was problem during the test o… |
Enumeration | .1.3.6.1.4.1.164.12.3.2.2.1.1.3 |
||||||||
|
atmLoopbackVpCDV
Cell Delay Variation for this sampling.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.2.1.1.4 |
||||||||
|
atmLoopbackVpAverageDelay
Average delay without including lost cells.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.2.1.1.5 |
||||||||
|
atmLoopbackVpMaxDelay
Maximum delay without including lost cells.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.2.1.1.6 |
||||||||
|
atmLoopbackVpMinDelay
Minimum delay.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.2.1.1.7 |
||||||||
|
atmLoopbackVpErrSessions
Errored Sessions. Will be updated once in 5 seconds.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.2.1.1.8 |
atmLoopbackVcTable
table.1.3.6.1.4.1.164.12.3.2.2.2
·
1 row entry
·
9 columns
This table contains parameters for an OAM VC loopback test.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
atmLoopbackVcIfIndex
The interface index of the ATM layer.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.2.2.1.1 |
||||||||
|
atmLoopbackVcVpi
The VPI of the OAM VCL.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.2.2.1.2 |
||||||||
|
atmLoopbackVcVci
The VCI of the OAM VCL.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.2.2.1.3 |
||||||||
|
atmLoopbackVcOperStatus
-noActive(1) means that the loopback test has not been activated for this VP.
-inProgress(2) means that the test has been activated and there is currently no problem. -failed(3) means there was problem during the test o… |
Enumeration | .1.3.6.1.4.1.164.12.3.2.2.2.1.4 |
||||||||
|
atmLoopbackVcCDV
Cell Delay Variation for this sampling.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.2.2.1.5 |
||||||||
|
atmLoopbackVcAverageDelay
Average delay without including lost cells.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.2.2.1.6 |
||||||||
|
atmLoopbackVcMaxDelay
The maximum delay without including lost cells.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.2.2.1.7 |
||||||||
|
atmLoopbackVcMinDelay
The minimum delay.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.2.2.1.8 |
||||||||
|
atmLoopbackVcErrSessions
Errored Sessions. Will be updated once in 5 seconds.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.2.2.1.9 |
atmLoopbackVpIvlTable
table.1.3.6.1.4.1.164.12.3.2.2.3
·
1 row entry
·
9 columns
This table contains parameters for an OAM VP loopback test, according interval number.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
atmLoopbackVpIvlIfIndex
The interface index of the ATM layer.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.2.3.1.1 |
||||||
|
atmLoopbackVpIvlVpi
The VPI of the OAM VPL.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.2.3.1.2 |
||||||
|
atmLoopbackVpIvlIvl
The relevant interval number.
|
Integer32 | .1.3.6.1.4.1.164.12.3.2.2.3.1.3 |
||||||
|
atmLoopbackVpIvlOperStatus
-noActive(1) means that the loopback test has not been activated for this VP during this interval.
-inProgress(2) has no meaning for an ended interval. -failed(3) means there was problem during the test or after having … |
Enumeration | .1.3.6.1.4.1.164.12.3.2.2.3.1.4 |
||||||
|
atmLoopbackVpIvlCDV
Cell Delay Variation for this interval.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.2.3.1.5 |
||||||
|
atmLoopbackVpIvlAverageDelay
Average delay without including lost cells for this interval.
|
SNMPv2-SMIInteger32 Constraints: range: 0-255Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.2.3.1.6 |
||||||
|
atmLoopbackVpIvlMaxDelay
The maximum delay without including lost cells for this interval.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.2.3.1.7 |
||||||
|
atmLoopbackVpIvlMinDelay
The minimum delay for this interval.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.2.3.1.8 |
||||||
|
atmLoopbackVpIvlErrSessions
Errored Sessions. Will be updated once in 5 seconds.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.2.3.1.9 |
atmLoopbackVcIvlTable
table.1.3.6.1.4.1.164.12.3.2.2.4
·
1 row entry
·
10 columns
This table contains parameters for an OAM VC loopback test.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
atmLoopbackVcIvlIfIndex
The interface index of the ATM layer.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.2.4.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
atmLoopbackVcIvlVpi
The VPI of the OAM VCL.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.2.4.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
atmLoopbackVcIvlVci
The VCI of the OAM VCL.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.2.4.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
atmLoopbackVcIvlIvl
The relevant interval number.
|
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.164.12.3.2.2.4.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
atmLoopbackVcIvlOperStatus
-noActive(1) means that the loopback test has not been activated for this VC during this interval.
-inProgress(2) has no meaning per interval. -failed(3) means there was problem for this test during this interval. -endS… |
Enumeration | .1.3.6.1.4.1.164.12.3.2.2.4.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
atmLoopbackVcIvlCDV
Cell Delay Variation for this interval.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.2.4.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
atmLoopbackVcIvlAverageDelay
Average delay without including lost cells.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.2.4.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
atmLoopbackVcIvlMaxDelay
The maximum delay without including lost cells.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.2.4.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
atmLoopbackVcIvlMinDelay
The minimum delay.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.2.4.1.9 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
atmLoopbackVcIvlErrSessions
Errored Sessions. Will be updated once in 5 seconds.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.2.4.1.10 |
atmVpPmTable
table.1.3.6.1.4.1.164.12.3.2.3.1
·
1 row entry
·
8 columns
This table contains parameters for VP performance monitoring.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
atmVpPmIfIndex
The interface index of the ATM layer.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.3.1.1.1 |
||||||||||||||||||
|
atmVpPmVpi
The VPI of the Performance Monitoring VPL.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.3.1.1.2 |
||||||||||||||||||
|
atmVpPmAdminStatus
up(2) - Activate PM.
down(3) - Deactivate PM. listenToActivationCells(4) - . originateActivationCells(5) - . |
Enumerationr/w Constraints: range: 0-255 |
.1.3.6.1.4.1.164.12.3.2.3.1.1.3 |
||||||||||||||||||
|
atmVpPmDirection
The direction of PM.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.12.3.2.3.1.1.4 |
||||||||||||||||||
|
atmVpPmBlockSize
Valid block sizes (in cells): 128, 256, 512, 1024, 2048, 4096,
8192, 16384, 32768. |
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.3.1.1.5 |
||||||||||||||||||
|
atmVpPmRowStatus
Creation/Deletion of rows in the table.
|
SNMPv2-TCRowStatusr/w Enumerated Values:
Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.12.3.2.3.1.1.6 |
||||||||||||||||||
|
atmVpPmSink
off (1) - Deactivate PM.
fwd (2) - Activate Forward PM only. fwdAndBwdReport(3) - Activate Forward PM and Backward reporting. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.12.3.2.3.1.1.7 |
||||||||||||||||||
|
atmVpPmSource
off (1) - Deactivate PM.
fwd (2) - Activate Forward PM only. fwdAndBwdReport(3) - Activate Forward PM and Backward reporting. |
Enumerationr/w | .1.3.6.1.4.1.164.12.3.2.3.1.1.8 |
atmVcPmTable
table.1.3.6.1.4.1.164.12.3.2.3.2
·
1 row entry
·
9 columns
This table contains parameters for VC performance monitoring.
An entry in table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
atmVcPmIfIndex
The interface index of the ATM layer.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.3.2.1.1 |
||||||||||||||||||||||
|
atmVcPmVpi
The VPI of the Performance Monitoring VCL.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.3.2.1.2 |
||||||||||||||||||||||
|
atmVcPmVci
The VCI of the PM VCL.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.3.2.1.3 |
||||||||||||||||||||||
|
atmVcPmAdminStatus
up(2) - Activate PM.
down(3) - Deactivate PM. listenToActivationCells(4) - . originateActivationCells(5) - . |
Enumerationr/w | .1.3.6.1.4.1.164.12.3.2.3.2.1.4 |
||||||||||||||||||||||
|
atmVcPmDirection
The direction of PM.
|
Enumerationr/w | .1.3.6.1.4.1.164.12.3.2.3.2.1.5 |
||||||||||||||||||||||
|
atmVcPmBlockSize
Valid block sizes (in cells): 128, 256, 512, 1024, 2048, 4096,
8192, 16384, 32768. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.3.2.3.2.1.6 |
||||||||||||||||||||||
|
atmVcPmRowStatus
Creation/Deletion of rows in the table.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.12.3.2.3.2.1.7 |
||||||||||||||||||||||
|
atmVcPmSink
off (1) - Deactivate PM.
fwd (2) - Activate Forward PM only. fwdAndBwdReport(3) - Activate Forward PM and Backward reporting. |
Enumerationr/w | .1.3.6.1.4.1.164.12.3.2.3.2.1.8 |
||||||||||||||||||||||
|
atmVcPmSource
off (1) - Deactivate PM.
fwd (2) - Activate Forward PM only. fwdAndBwdReport(3) - Activate Forward PM and Backward reporting. |
Enumerationr/w | .1.3.6.1.4.1.164.12.3.2.3.2.1.9 |
atmNteMdlConfigTable
table.1.3.6.1.4.1.164.12.3.3.1.1
·
1 row entry
·
3 columns
Module configuration table.
There is an entry in this table just for those modules that have
parameters that are relevant to module level only.
parameters that are relevant to module level only.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
atmNteMdlSlotIndex
The slot number.
|
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.12.3.3.1.1.1.1 |
||||||||||||
|
atmNteMdlPrtCpuSharing
This object lets the user decide what will be the CPU sharing
between the ports of the module. This object is applicable for modules in which the same CPU handles the traffic of all ports. equal - All p… |
Enumerationr/w | .1.3.6.1.4.1.164.12.3.3.1.1.1.2 |
||||||||||||
|
atmNteMdlInputPriorityMechanism
This object allows the user to Enable/Disable the Input priority mechanism.
This object is applicable for modules with more than one port, in which the total ports input may be greater than the port output. … |
Enumerationr/w | .1.3.6.1.4.1.164.12.3.3.1.1.1.3 |
.1.3.6.1.4.1.164.12.4.1.3
·
1 row entry
·
7 columns
buffer contain history buffer of agent alarms.
Agent alarm history list entry.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
atmSuSystemHistoryAlrIndex
A unique number to identify an entry in the history alarm table.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.4.1.3.1.1 |
||||||||
|
atmSuSystemHistoryAlrIfIndex
This value indicates the port on which the alarms occured.
configuration(system) alarms have port index equal to 0. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.4.1.3.1.2 |
||||||||
|
atmSuSystemHistoryAlrDescription
This attribute is a text description of the alarm.
The alarm descipion include alarm code and alarm text. |
OctetString Enumerated Values:
|
.1.3.6.1.4.1.164.12.4.1.3.1.3 |
||||||||
|
atmSuSystemHistoryAlrStatus
This attribute indicates the status of the alarm.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.12.4.1.3.1.4 |
||||||||
|
atmSuSystemHistoryAlrOccurrenceTime
This value indicates the date and time of the occurrence
of the event that caused this alarm. Date and time format: YYYY-MM-DD, HH:MM:SS |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.12.4.1.3.1.5 |
||||||||
|
atmSuSystemHistoryAlrVpi
This value indicates the ATM VPI of the connection
associated with the event that caused this alarm. When not applicable, value is 0 |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.4.1.3.1.6 |
||||||||
|
atmSuSystemHistoryAlrVci
This value indicates the ATM VCI of the connection
associated with with the event that caused this alarm. When not applicable, value is 0 |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.4.1.3.1.7 |
.1.3.6.1.4.1.164.12.4.1.5
·
1 row entry
·
3 columns
table which contains all alarms Currently active ( status ON ) in the agent.
Agent alarm list entry.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
atmSuSystemCurrentAlrIndex
A unique number to identify an entry in the Current alarms table.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.4.1.5.1.1 |
|
atmSuSystemCurrentAlrIfIndex
This value indicates the port on which the alarms occured.
configuration alarms have port index equal to 0. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.4.1.5.1.2 |
|
atmSuSystemCurrentAlrDescription
This attribute is a text description of the alarm.
The alarm descipion include alarm code and alarm text. |
OctetString | .1.3.6.1.4.1.164.12.4.1.5.1.3 |
atmSuPortDataCnfgTable
table.1.3.6.1.4.1.164.12.4.2.1
·
1 row entry
·
13 columns
Data Port global configuration table. this table include parametes which are common to the physical port and not depend on whether the port interface is Frame-Relay or ATM-DXI.
the entries at this table describes the configuration
of the Data-Port.
of the Data-Port.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
atmSuPortDataApplication
This attribute indicates the protocol application which runs
above the physical port. |
Enumerationr/w | .1.3.6.1.4.1.164.12.4.2.1.1.1 |
|
atmSuPortDataRate
This attribute indicates the operation rate of the port.
AmcdT1 / Ace-20T allowes rates up to 1536KBps ( options 1-12 ), while AmcdE1 / Ace-20E allowes all options. |
Enumerationr/w | .1.3.6.1.4.1.164.12.4.2.1.1.2 |
|
atmSuPortDataDCD
This attribute indicates if the bits CtsCd( Clear-to-send Carry-detect)
are being checked. In AMCD CTS is also checked. off - ignore DCD signal on - obey DCD signal |
Enumerationr/w | .1.3.6.1.4.1.164.12.4.2.1.1.3 |
|
atmSuPortDataMode
deprecated
This attribute indicates the port mode of sampling data physical.
|
Enumeration | .1.3.6.1.4.1.164.12.4.2.1.1.4 |
|
atmSuPortDataCRC
This attribute indicates the type of CRC checking
on receiving/transmiting frames. |
Enumerationr/w | .1.3.6.1.4.1.164.12.4.2.1.1.5 |
|
atmSuPortDataClock
This attribute indicates the clock using for synchronization
for the data port. |
Enumerationr/w | .1.3.6.1.4.1.164.12.4.2.1.1.6 |
|
atmSuPortDataMaxNoOfConns
this object indicates the maximum number of cross-connect
connections allowed beetween the ATM port and the Data Port identified by IfIndex. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.4.2.1.1.7 |
|
atmSuPortDataConfNoOfConns
this object indicates the configured number of cross-connect
connections exist beetween the ATM port and the Data Port identified by IfIndex. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.4.2.1.1.8 |
|
atmSuPortDataIdleCode
This attribute is applicable only for application aal1Stream.
It indicates the value to be transmitted whenever the port is idle. |
Integer32r/w | .1.3.6.1.4.1.164.12.4.2.1.1.9 |
|
atmSuPortDataInterfaceType
Physical layer interface type. (Configureable or Non-Configureable)
|
Enumerationr/w | .1.3.6.1.4.1.164.12.4.2.1.1.10 |
|
atmSuPortDataClkPolarity
This object indicates the clock polarity.
For LA-110/140 this object will be applicable only for X.21/V.35/data port |
Enumerationr/w | .1.3.6.1.4.1.164.12.4.2.1.1.11 |
|
atmSuPortDataCtsStatus
CTS status - the signal state received from ATM network
(for the local DTE usage). LA110 receiving RTS down from remote DTE device via ATM network, will change CTS signal state to down (off) toward local DTE device |
Enumeration | .1.3.6.1.4.1.164.12.4.2.1.1.12 |
|
atmSuPortDataRtsStatus
RTS status - the signal state received from local DTE
(to be forwarded to ATM network). LA110 receiving RTS down from the local DTE device will transmit all '1' to ATM (in order to carry the signaling to re… |
Enumeration | .1.3.6.1.4.1.164.12.4.2.1.1.13 |
atmSuPortDs1CnfgTable
table.1.3.6.1.4.1.164.12.4.2.2.1
·
1 row entry
·
5 columns
This table include expansion configuration to the DS1 physical port.
the entries at this table describes the configuration
of the agent physical.
of the agent physical.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
atmSuPortDs1CnfgRxSensitivity
This attribute is the rx line sensetivity parameter used only for
T1/CSU and E1/LTU interfaces. |
Enumerationr/w | .1.3.6.1.4.1.164.12.4.2.2.1.1.1 |
|
atmSuPortDs1CnfgLBO
This attribute is the line-Build-Out indicates sensitivity of the DS1 interface.
The user can define if the agent will be CSU or DSU (for T1 only) by choosing the right option. On E1 interface this is done by hardware, … |
Enumerationr/w | .1.3.6.1.4.1.164.12.4.2.2.1.1.2 |
|
atmSuPortDs1CnfgRestoreTime
Determines the time passing from the disappearance of the loss of
synchronization condition (red alarm) to the restoration of normal service. The options 1secFast(2) and 10sec62411(3) for E1 interfaces are proprietary i… |
Enumerationr/w | .1.3.6.1.4.1.164.12.4.2.2.1.1.3 |
|
atmSuPortDs1CnfgInbandMng
A unique number to identify type of
inband management over the link. For LA-104 and IMXi4, only one port may be used for inband management |
Enumerationr/w | .1.3.6.1.4.1.164.12.4.2.2.1.1.4 |
|
atmSuPortDs1CnfgDedicatedTs
A unique number to identify Dedicated Time Slot for inband management
of the T1/E1 port. It is applicable only when atmSuPortDs1CnfgInbandMng selected is not off. 1..24 - Dedicated TS of T1 1..31 - Dedi… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.4.2.2.1.1.5 |
atmSuPortDs1CbrCnfgTable
table.1.3.6.1.4.1.164.12.4.2.2.2
·
1 row entry
·
6 columns
This table include expansion configuration to the DS1 physical port.
the entries at this table describes the configuration
of the agent physical.
of the agent physical.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
atmSuPortDs1CbrIdleCode
An Idle code which sent on unused time-slots at CBR port .
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.4.2.2.2.1.1 |
|
atmSuPortDs1CbrRxTimeSlots
This value indicates the time-slots used by the port for receiving.
It uses 32 bits ( in 4 bytes octet string ) for E1 and low 24 bits for T1. each bit represents a time slot for receiving : time-slot 0 = bit 0 (LSB - … |
TimeSlots | .1.3.6.1.4.1.164.12.4.2.2.2.1.2 |
|
atmSuPortDs1CbrTxTimeSlots
This value indicates the time-slots used by the port for transmiting.
It uses 32 bits for E1 and low 24 bits for T1. each bit represents a time slot for transmiting : time-slot 0 = bit 0 (LSB - most right bit in last b… |
TimeSlots | .1.3.6.1.4.1.164.12.4.2.2.2.1.3 |
|
atmSuPortDs1CbrMaxNoOfConns
this object indicates the maximum number of cross-connect
connections allowed beetween the ATM port and the CBR Port identified by IfIndex. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.4.2.2.2.1.4 |
|
atmSuPortDs1CbrConfNoOfConns
this object indicates the configured number of cross-connect
connections exist beetween the ATM port and the CBR Port identified by IfIndex. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.4.2.2.2.1.5 |
|
atmSuPortDs1CbrSignallingSampleTime
determines how often the signalling of the DBCES connections are sampled
and thier activity determined. |
Enumerationr/w | .1.3.6.1.4.1.164.12.4.2.2.2.1.6 |
atmSuPortAtmCnfgTable
table.1.3.6.1.4.1.164.12.4.2.3.1
·
1 row entry
·
11 columns
This table contains global configuration to the ATM port.
This object contains information about agent ATM configuration.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
atmSuPortAtmCnfgIdleCellCLP
Determines the clp bit value for transmition
in empty time slots. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.12.4.2.3.1.1.1 |
||||||||
|
atmSuPortAtmCnfgScramble
Determined by the standards if the cell will be scrambled or not.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.12.4.2.3.1.1.2 |
||||||||
|
atmSuPortAtmSNMPVpi
The Vcc Vpi for SNMP requests.
|
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.4.2.3.1.1.3 |
||||||||
|
atmSuPortAtmSNMPVci
The Vcc Vci for SNMP requests.
|
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.4.2.3.1.1.4 |
||||||||
|
atmSuPortAtmSNMPStatus
value indicates if the SNMP Vcc is available for management.
|
Enumerationr/w | .1.3.6.1.4.1.164.12.4.2.3.1.1.5 |
||||||||
|
atmSuPortAtmILMIStatus
Value indicates if agent should respond to ILMI requests from the
Atm switch or forward it. note: when using Atm to Frame-Relay configuration this value should be active to support ILMI. when using Atm-AtmDx… |
Enumerationr/w | .1.3.6.1.4.1.164.12.4.2.3.1.1.6 |
||||||||
|
atmSuPortAtmSNMPIp
The interface IP address for SNMP requests.
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.12.4.2.3.1.1.7 |
||||||||
|
atmSuPortAtmCnfgCDVOptimization
value indicates if optimization of CDV (Cell Delay Varation)
is enbabled. |
Enumerationr/w | .1.3.6.1.4.1.164.12.4.2.3.1.1.8 |
||||||||
|
atmSuPortAtmCnfgShapingMode
ATM Shaping mode.
Three possible values: SW Shaping. HW Shaping - APC with NCITS = 1. HW Shaping - APC with NCITS = 2 The difference between the two hardware modes is in the connection cell granula… |
Enumerationr/w | .1.3.6.1.4.1.164.12.4.2.3.1.1.9 |
||||||||
|
atmSuPortAtmSNMPTrafficDescrIndex
The value of this object identifies the row
in the atmTrafficDescrParamTable which applies to the transmit direction of the VCL. |
ATM-TC-MIBAtmTrafficDescrParamIndexr/w Textual Convention: ATM-TC-MIBAtmTrafficDescrParamIndex Integer32Type Constraints: range: 0..2147483647 |
.1.3.6.1.4.1.164.12.4.2.3.1.1.10 |
||||||||
|
atmSuPortAtmTrafficDescrIndex
The value of this object identifies the row
in the atmTrafficDescrParamTable which applies to whole ATM WAN port. |
ATM-TC-MIBAtmTrafficDescrParamIndexr/w Textual Convention: ATM-TC-MIBAtmTrafficDescrParamIndex Integer32Type Constraints: range: 0..2147483647 |
.1.3.6.1.4.1.164.12.4.2.3.1.1.11 |
atmSuPortAtmIfStatsTable
table.1.3.6.1.4.1.164.12.4.2.3.2
·
1 row entry
·
8 columns
The table contains additional statistics information about the ATM interface.
An entry in the ATM Interface statistics table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
atmSuPortAtmRxClp0Cells
The number of cells received with correct
HECs and CLP=0 and not misrouted |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.4.2.3.2.1.1 |
||||||
|
atmSuPortAtmRxClp1Cells
The number of cells received with correct
HEC's and CLP=1 and not misrouted. |
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.4.2.3.2.1.2 |
||||||
|
atmSuPortAtmRxEfciSetCells
The number of cells received with EFCI bit set by
the Agent |
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.4.2.3.2.1.3 |
||||||
|
atmSuPortAtmRxOamCells
The number of OAM cells received with correct HECs.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.4.2.3.2.1.4 |
||||||
|
atmSuPortAtmTxClp0Cells
The number of cells transmitted with CLP=0.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.4.2.3.2.1.5 |
||||||
|
atmSuPortAtmTxClp1Cells
The number of cells transmitted with CLP=1.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.4.2.3.2.1.6 |
||||||
|
atmSuPortAtmTxEfciSetCells
The number of cells transmitted with EFCI bit set by
the Agent |
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.4.2.3.2.1.7 |
||||||
|
atmSuPortAtmTxOamCells
The number of transmitted OAM cells.
|
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.4.2.3.2.1.8 |
.1.3.6.1.4.1.164.12.4.2.3.3
·
1 row entry
·
20 columns
The table contains additional information about the ATM Vcl end points.
An entry in the ATM Vcl statistics table.
For Vpl statistics, use atmVclVci = 65536
(maximum valid value of atmVclVci +1)
For Vpl statistics, use atmVclVci = 65536
(maximum valid value of atmVclVci +1)
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
atmSuPortAtmVclStatsRxCells
The total number of cells received with
correct HEC's. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.4.2.3.3.1.1 |
||||||||||
|
atmSuPortAtmVclStatsRxClp0Cells
The number of cells received with correct
HEC's and CLP=0. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.4.2.3.3.1.2 |
||||||||||
|
atmSuPortAtmVclStatsRxClp1Cells
The number of cells received with correct
HEC's and CLP=1. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.4.2.3.3.1.3 |
||||||||||
|
atmSuPortAtmVclStatsRxDiscardsCells
The number of cells, in ingress direction,
discarded due to policing violation. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.4.2.3.3.1.4 |
||||||||||
|
atmSuPortAtmVclStatsTxCells
The total number of cells transmitted.
|
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.4.2.3.3.1.5 |
||||||||||
|
atmSuPortAtmVclStatsTxClp0Cells
The number of cells transmitted with CLP=0.
|
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.4.2.3.3.1.6 |
||||||||||
|
atmSuPortAtmVclStatsTxClp1Cells
The number of cells transmitted with CLP=1.
|
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.4.2.3.3.1.7 |
||||||||||
|
atmSuPortAtmVclStatsRxTotalAISCells
Total number of AIS cells received on the VC.
|
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.4.2.3.3.1.8 |
||||||||||
|
atmSuPortAtmVclStatsRxTotalCCCells
Total number of Continuity Check cells that were
received on the VC. |
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.4.2.3.3.1.9 |
||||||||||
|
atmSuPortAtmVclStatsTotalSuccLoopbacks
Total number of loopbacks that were requested by the ACE20
and for which there was a response (not supported). |
SNMPv2-SMICounter32 Constraints: range: 0-10Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.4.2.3.3.1.10 |
||||||||||
|
atmSuPortAtmVclStatsTotalFailLoopbacks
Total number of loopbacks that were requested by the ACE20
and for which there was no response (not supported). |
SNMPv2-SMICounter32 Constraints: range: 0-1000000Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.4.2.3.3.1.11 |
||||||||||
|
atmSuPortAtmVclStatsRxTotalRDICells
Total number of RDI cells received on a VC.
|
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.4.2.3.3.1.12 |
||||||||||
|
atmSuPortAtmVclStatsTotalLOCSeconds
Total number of seconds during which there was loss of
continuity on the VC - no data and no continuity check cells were received on the VC whilst it was in 'sink' continuity check mode. |
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.4.2.3.3.1.13 |
||||||||||
|
atmSuPortAtmVclStatsRxTotalLoopbackRequests
Total number of loopback requests received by the ACE20 on a VC.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.4.2.3.3.1.14 |
||||||||||
|
atmSuPortAtmVclStatsTxTotalAISCells
Total number of AIS cells that were transmitted on a VC.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.4.2.3.3.1.15 |
||||||||||
|
atmSuPortAtmVclStatsTxTotalCCCells
Total number of continuity check cells that were transmitted on
a VC (when there is no data cells and the connection is in 'source' continuity check mode). |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.4.2.3.3.1.16 |
||||||||||
|
atmSuPortAtmVclStatsTxTotalRDICells
Total number of RDI cells transmitted on a VC.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.4.2.3.3.1.17 |
||||||||||
|
atmSuPortAtmVclStatsTxTotalLoopbackResponses
Total number of loopback responses that were transmitted as a
result of loopback requests received. |
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.4.2.3.3.1.18 |
||||||||||
|
atmSuPortAtmVclStatsTxTotalLoopbackRequests
Total number of loopback requests that were transmitted by the ACE20 on a VC.
|
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.4.2.3.3.1.19 |
||||||||||
|
atmSuPortAtmVclStatsRxTotalLoopbackResponses
Total number of loopback responses that were received as a
result of loopback transmitted by the ACE20. |
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.4.2.3.3.1.20 |
atmSuPortFrLportTable
table.1.3.6.1.4.1.164.12.4.2.4.1
·
1 row entry
·
6 columns
The table Contains configuration parameters of the Frame-Relay port and has expansion to frLportTable in RFC1604 MIB.
An entry in the Frame Relay Logical Port
Information table.
Information table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
atmSuPortFrLportSNMPDlci
The SNMP Dlci of this entry.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.4.2.4.1.1.1 |
|
atmSuPortFrLportSNMPStatus
value indicates if SNMP over FR is available for management.
|
Enumerationr/w | .1.3.6.1.4.1.164.12.4.2.4.1.1.2 |
|
atmSuPortFrLportVCSigProtocol
The value of this object identifies the Local
In-Channel Signaling Protocol that is used for this frame relay UNI/NNI logical port. |
Enumerationr/w | .1.3.6.1.4.1.164.12.4.2.4.1.1.3 |
|
atmSuPortFrLportVCSigProcedure
The value of this object identifies the Local
In-Channel Signaling Procedure that is used for this UNI/NNI logical port. The UNI/NNI logical port can be performing user-to-network network-side and user-to-network user-… |
Enumerationr/w | .1.3.6.1.4.1.164.12.4.2.4.1.1.4 |
|
atmSuPortFrLportCLLM
indicate if the configuration is supporting CLLM ( Consolidated Link
Layer Management ) . |
Enumerationr/w Constraints: range: 1-4095 |
.1.3.6.1.4.1.164.12.4.2.4.1.1.5 |
|
atmSuPortFrLportSNMPIp
The interface IP address of this entry.
|
RFC1155-SMIIpAddressr/w Constraints: range: 0-65535Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.12.4.2.4.1.1.6 |
atmSuPortFrPvcEndptTable
table.1.3.6.1.4.1.164.12.4.2.4.2
·
1 row entry
·
5 columns
The table contains additional information about the Frame Relay end point.
An entry for FR end-point statistics ( expansion to RFC 1604 ).
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
atmSuPortFrPvcEndptTxFECNs
number of frames transmited with FECN ( Forward Explicit
Congestion Notification ). |
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.4.2.4.2.1.1 |
||||
|
atmSuPortFrPvcEndptTxBECNs
number of frames transmited with BECN ( Backward Explicit
Congestion Notification ). |
SNMPv2-SMICounter32 Enumerated Values:
Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.4.2.4.2.1.2 |
||||
|
atmSuPortFrPvcEndptTxDEs
number of frames transmited with the DE ( Discarded Eligible ) bit set.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.4.2.4.2.1.3 |
||||
|
atmSuPortFrPvcEndptRxFECNs
number of frames received with FECN ( Forward Explicit
Congestion Notification ). |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.4.2.4.2.1.4 |
||||
|
atmSuPortFrPvcEndptRxBECNs
number of frames received with BECN ( Backward Explicit
Congestion Notification ). |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.4.2.4.2.1.5 |
atmSuPortDxiConfTable
table.1.3.6.1.4.1.164.12.4.2.5.1
·
1 row entry
·
3 columns
This table contains ATM-DXI managment address (DFA) ending at the local agent. only LMI managment supported for ATM-DXI.
This object contains information about agent Dxi interface.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
atmSuPortDxiPortMode
This object identifies the dxi mode being used by
the atm dxi port. |
Enumerationr/w | .1.3.6.1.4.1.164.12.4.2.5.1.1.1 |
|
atmSuPortDxiSigProtocol
This value indicates if we using LMI signalling protocol
or not using any signalling . |
Enumerationr/w Constraints: range: 10-217 |
.1.3.6.1.4.1.164.12.4.2.5.1.1.2 |
|
atmSuPortDxiSigDfa
The Signalling Dfa address .
the default LMI Dfa defined for LMI by the AtmForum is 0. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.4.2.5.1.1.3 |
atmSuPortCmdTable
table.1.3.6.1.4.1.164.12.4.2.6
·
1 row entry
·
2 columns
General commands to be done on agent's ports.
This object contains entry information.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
atmSuResetPortStatsCmd
reset statistics of port.
|
Enumerationr/w | .1.3.6.1.4.1.164.12.4.2.6.1.1 |
|
atmSuResetConnsStatsCmd
reset statistics of all cross connections attached to this port.
set-request is allowed only on the DATA Ports . for get-request value is always 'off' |
Enumerationr/w Constraints: range: 1-4095 |
.1.3.6.1.4.1.164.12.4.2.6.1.2 |
atmSuPortEtherTable
table.1.3.6.1.4.1.164.12.4.2.7.1
·
1 row entry
·
13 columns
The table Contains configuration parameters of the Ethernet port.
An entry in the Ethernet Port Information table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
atmSuPortEtherIP
The interface IP address for SNMP requests.
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.12.4.2.7.1.1.1 |
||||||
|
atmSuPortEtherMask
The interface IP address mask for SNMP requests.
|
RFC1155-SMIIpAddressr/w Enumerated Values:
Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.12.4.2.7.1.1.2 |
||||||
|
atmSuPortEtherDefaultGateWayIp
The Ethernet bridge default gateway IP address.
|
RFC1155-SMIIpAddressr/w Enumerated Values:
Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.12.4.2.7.1.1.3 |
||||||
|
atmSuPortEtherDefaultCrossConnectId
Default Cross Connect Id.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.4.2.7.1.1.4 |
||||||
|
atmSuPortEtherDefaultGatewayStatus
Default Gateway Status.
|
Enumerationr/w | .1.3.6.1.4.1.164.12.4.2.7.1.1.5 |
||||||
|
atmSuPortEtherSNMPStatus
The value indicates if the SNMP of Ethernet bridge interface is available
for management. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.12.4.2.7.1.1.6 |
||||||
|
atmSuPortEtherFragmentation
Fragmentation. When application is not router value must be 'notApplicable'.
|
Enumerationr/w | .1.3.6.1.4.1.164.12.4.2.7.1.1.7 |
||||||
|
atmSuPortEtherRIPMode
RIP Mode. When application is not router value must be 'notApplicable'.
|
Enumerationr/w | .1.3.6.1.4.1.164.12.4.2.7.1.1.8 |
||||||
|
atmSuPortEtherBridgingMode
Bridging mode can be one of the following:
ATM <> Ethernet - Bridging is between the Ethernet port and the ATM port (there is no bridging between VCs). ATM <> Ethernet + ATM - Bridging is done both between the Ethern… |
Enumerationr/w | .1.3.6.1.4.1.164.12.4.2.7.1.1.9 |
||||||
|
atmSuPortEtherARPTimeout
ARP Timeout. When application is not router or when
this object is not applicable, value must be 0. |
Integer32r/w | .1.3.6.1.4.1.164.12.4.2.7.1.1.10 |
||||||
|
atmSuPortEtherAgingTime
The timeout period in seconds for aging out stored information.
valid values are 10...1000000. The value of (0) has the special meaning - not applicable. |
Integer32r/w Constraints: range: 1-4095 |
.1.3.6.1.4.1.164.12.4.2.7.1.1.11 |
||||||
|
atmSuPortEtherPppOEEnable
Enable or Disable transparent PPP over ethernet bridge.
When PPP over Ethernet is enabled, non PPP traffic is blocked by the bridge. |
Enumerationr/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.164.12.4.2.7.1.1.12 |
||||||
|
atmSuPortEtherStatus
This object allows user to add/remove entries to/from this table.
It will be supported only by certain devices. destroy - may not be possible for certain interfaces. |
Enumerationr/w | .1.3.6.1.4.1.164.12.4.2.7.1.1.13 |
atmFrDescrTable
table.1.3.6.1.4.1.164.12.4.3.1.2
·
1 row entry
·
7 columns
This table contains information on ATM to FR Connection descriptor types, and their associated parameters.
This list contains ATM to FR Connection descriptor
type, and its associated parameters.
type, and its associated parameters.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
atmFrDescrIndex
This object is used to identify the row index of
the ATM to FR connection descriptor table. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.4.3.1.2.1.1 |
||||||||||||||||||
|
atmFrDescrType
The value of this object identifies the type
of the ATM to FR Connection descriptor. The type may indicate Network connection descriptor or a Service connection descriptor with one or more parameters. These parameters a… |
ObjectIdentifierr/w Enumerated Values:
|
.1.3.6.1.4.1.164.12.4.3.1.2.1.2 |
||||||||||||||||||
|
atmFrDescrClp2De
The first parameter of the ATM to FR Connection
descriptor used according to the value of atmFrDescrType. |
Enumerationr/w | .1.3.6.1.4.1.164.12.4.3.1.2.1.3 |
||||||||||||||||||
|
atmFrDescrDe2Clp
The second parameter of the ATM to FR Connection
descriptor used according to the value of atmFrDescrType. |
Enumerationr/w | .1.3.6.1.4.1.164.12.4.3.1.2.1.4 |
||||||||||||||||||
|
atmFrDescrFecn2Efci
The third parameter of the ATM to FR Connection
descriptor used according to the value of atmFrDescrType. |
Enumerationr/w | .1.3.6.1.4.1.164.12.4.3.1.2.1.5 |
||||||||||||||||||
|
atmFrDescrMappingMode
The fourth parameter of the ATM to FR Connection
descriptor used according to the value of atmFrDescrType. |
Enumerationr/w | .1.3.6.1.4.1.164.12.4.3.1.2.1.6 |
||||||||||||||||||
|
atmFrDescrRowStatus
This object is used to create,
modify or delete a row in this table. |
SNMPv2-TCRowStatusr/w Enumerated Values:
Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.12.4.3.1.2.1.7 |
atmFrCnfgTable
table.1.3.6.1.4.1.164.12.4.3.1.4
·
1 row entry
·
15 columns
This table defines virtual connections between ATM and Frame Relay endpoints.
An entry defines virtual connection between ATM and
Frame Relay endpoint.
Frame Relay endpoint.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
atmFrCnfgCrossConnectIndex
A unique value to identify this cross-connect.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.4.3.1.4.1.1 |
||||||||||||||
|
atmFrCnfgAtmIfIndex
The ifIndex associated to the ATM interface.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.4.3.1.4.1.2 |
||||||||||||||
|
atmFrCnfgAtmVpi
The Vpi number of the ATM end point.
|
Integer32 | .1.3.6.1.4.1.164.12.4.3.1.4.1.3 |
||||||||||||||
|
atmFrCnfgAtmVci
The Vci number of the ATM end point.
|
Integer32 Constraints: range: 1-47 |
.1.3.6.1.4.1.164.12.4.3.1.4.1.4 |
||||||||||||||
|
atmFrCnfgFrIfIndex
The ifIndex associated to the Frame Relay
interface. |
SNMPv2-SMIInteger32 Constraints: range: 1-47Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.4.3.1.4.1.5 |
||||||||||||||
|
atmFrCnfgDlci
The DLCI number of the FR end point.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.4.3.1.4.1.6 |
||||||||||||||
|
atmFrCnfgAdminStatus
This object indicates the connection status requested by the user.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.12.4.3.1.4.1.7 |
||||||||||||||
|
atmFrCnfgOperStatus
This object indicates the Operational status of the connection.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.12.4.3.1.4.1.8 |
||||||||||||||
|
atmFrCnfgLastChange
The value of sysUpTime at the time the ATM to FR
connection entered its mandatory operational state. If the mandatory state was entered prior to the last re-initialization of the local network management subsystem, then… |
SNMPv2-TCTimeStamp Constraints: range: 1-1Textual Convention: SNMPv2-TCTimeStamp Unsigned32 |
.1.3.6.1.4.1.164.12.4.3.1.4.1.9 |
||||||||||||||
|
atmFrCnfgMappingDescrIndex
The value of this object identifies the row
in the atmFrDescrTable. |
SNMPv2-SMIInteger32r/w Constraints: range: 0-32Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.4.3.1.4.1.10 |
||||||||||||||
|
atmFrCnfgSscsDlci
The DLCI number given to the SSCS Sub-layer for network interworking only
( the default value is 'atmFrCnfgDlci' ). for Service Interworking do not implement this variable. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.4.3.1.4.1.11 |
||||||||||||||
|
atmFrCnfgTrafficDescrIndex
The value of this object identifies the row
in the atmTrafficDescrParamTable which applies to the transmit direction of the VCL. note :setting this value is allowed only to point2point connections. for many2one co… |
ATM-TC-MIBAtmTrafficDescrParamIndexr/w Textual Convention: ATM-TC-MIBAtmTrafficDescrParamIndex Integer32Type Constraints: range: 0..2147483647 |
.1.3.6.1.4.1.164.12.4.3.1.4.1.12 |
||||||||||||||
|
atmFrCnfgPriority
This object define the priority of connection.
The first parameter affects the transmition of cells in Conjested network is the bitRate( Cbr has the highest priority and then Vbr,Ubr ) In connections with the same bitRa… |
Enumerationr/w | .1.3.6.1.4.1.164.12.4.3.1.4.1.13 |
||||||||||||||
|
atmFrCnfgRowStatus
This object is used to create
a new row or modify or delete an existing row in this table. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.12.4.3.1.4.1.14 |
||||||||||||||
|
atmFrCnfgAllocatedBuffers
This object enables user to limit the amount of buffers
used by the connection. The limit set by this object will give the effect of a virtual buffer pool per connection. The user can allocate between … |
Integer32r/w | .1.3.6.1.4.1.164.12.4.3.1.4.1.15 |
atmDxiCnfgTable
table.1.3.6.1.4.1.164.12.4.3.2.2
·
1 row entry
·
12 columns
This table defines virtual connections between ATM and ATM-DXI endpoints.
An entry defines virtual connection between ATM and
ATM-DXI endpoint.
ATM-DXI endpoint.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
atmDxiCnfgCrossConnectIndex
A unique value to identify this cross-connect.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.4.3.2.2.1.1 |
||||||||||||||||||
|
atmDxiCnfgAtmIfIndex
The ifIndex associated to the ATM interface.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.4.3.2.2.1.2 |
||||||||||||||||||
|
atmDxiCnfgAtmVpi
The Vpi number of the ATM end point.
|
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.12.4.3.2.2.1.3 |
||||||||||||||||||
|
atmDxiCnfgAtmVci
The Vci number of the ATM end point.
|
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.12.4.3.2.2.1.4 |
||||||||||||||||||
|
atmDxiCnfgDxiIfIndex
The ifIndex associated to the atm-dxi interface.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.4.3.2.2.1.5 |
||||||||||||||||||
|
atmDxiCnfgDfa
The DFA number of the DXI end point.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.4.3.2.2.1.6 |
||||||||||||||||||
|
atmDxiCnfgAdminStatus
The requested state of the ATM to DXI connection.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.12.4.3.2.2.1.7 |
||||||||||||||||||
|
atmDxiCnfgOperStatus
The real operational status of the ATM to DXI connection.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.12.4.3.2.2.1.8 |
||||||||||||||||||
|
atmDxiCnfgLastChange
The value of sysUpTime at the time the ATM to DXI
connection entered its mandatory operational state. If the mandatory state was entered prior to the last re-initialization of the local network management subsystem, the… |
SNMPv2-TCTimeStamp Textual Convention: SNMPv2-TCTimeStamp Unsigned32 |
.1.3.6.1.4.1.164.12.4.3.2.2.1.9 |
||||||||||||||||||
|
atmDxiCnfgTrafficDescrIndex
The value of this object identifies the row
in the atmTrafficDescrParamTable which applies to the transmit direction of the VCL. |
ATM-TC-MIBAtmTrafficDescrParamIndexr/w Textual Convention: ATM-TC-MIBAtmTrafficDescrParamIndex Integer32Type Constraints: range: 0..2147483647 |
.1.3.6.1.4.1.164.12.4.3.2.2.1.10 |
||||||||||||||||||
|
atmDxiCnfgPriority
This object define the priority of connection.
The first parameter affects the transmition of cells in Conjested network is the bitRate( Cbr has the highest priority and then Vbr,Ubr ) In connections with the same bitRa… |
Enumerationr/w | .1.3.6.1.4.1.164.12.4.3.2.2.1.11 |
||||||||||||||||||
|
atmDxiCnfgRowStatus
This object is used to create a new row or
modify or delete an existing row in this table. |
SNMPv2-TCRowStatusr/w Enumerated Values:
Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.12.4.3.2.2.1.12 |
atmCbrCnfgTable
table.1.3.6.1.4.1.164.12.4.3.3.1
·
1 row entry
·
15 columns
This table defines AAL1 virtual connections (not CES) between ATM port and DS1-CBR port.
An entry defines virtual connection between ATM port and
DS1-CBR port.
DS1-CBR port.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
atmCbrCnfgAtmIfIndex
The ifIndex associated to the ATM interface.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.4.3.3.1.1.1 |
||||||||||||||||||
|
atmCbrCnfgAtmVpi
The Vpi number of the ATM end point.
|
Integer32 Constraints: range: 10-217 |
.1.3.6.1.4.1.164.12.4.3.3.1.1.2 |
||||||||||||||||||
|
atmCbrCnfgAtmVci
The Vci number of the ATM end point.
|
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.12.4.3.3.1.1.3 |
||||||||||||||||||
|
atmCbrCnfgCbrIfIndex
The ifIndex associated to the logical interface of DS0s bundle
or to ifIndex of one of the data ports. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.4.3.3.1.1.4 |
||||||||||||||||||
|
atmCbrCnfgAdminStatus
The requested status of the connection.
|
Enumerationr/w | .1.3.6.1.4.1.164.12.4.3.3.1.1.5 |
||||||||||||||||||
|
atmCbrCnfgOperStatus
The real operational status of the connection.
|
Enumeration | .1.3.6.1.4.1.164.12.4.3.3.1.1.6 |
||||||||||||||||||
|
atmCbrCnfgLastChange
The value of sysUpTime at the time the ATM to CBR
connection entered its mandatory operational state. If the mandatory state was entered prior to the last re-initialization of the local network management subsystem, the… |
SNMPv2-TCTimeStamp Constraints: range: 1-4095Textual Convention: SNMPv2-TCTimeStamp Unsigned32 |
.1.3.6.1.4.1.164.12.4.3.3.1.1.7 |
||||||||||||||||||
|
atmCbrCnfgAAL1Signalling
Not in use. Must be always 'off'.
|
Enumerationr/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.164.12.4.3.3.1.1.8 |
||||||||||||||||||
|
atmCbrCnfgRxTimeSlots
This value indicates the time-slots used by this connection for receiving.
It uses 32 bits for E1 and low 24 bits for T1. each bit represents a time slot for receiving : time-slot 0 = bit 0 (LSB - most right bit in las… |
TimeSlotsr/w | .1.3.6.1.4.1.164.12.4.3.3.1.1.9 |
||||||||||||||||||
|
atmCbrCnfgRxBytesPerCell
number of bytes to be receive in order per cell to low the delay.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.4.3.3.1.1.10 |
||||||||||||||||||
|
atmCbrCnfgTxTimeSlots
This value indicates the time-slots used by this connection for receiving.
It uses 32 bits for E1 and low 24 bits for T1. each bit represents a time slot for receiving : time-slot 0 = bit 0 (LSB - most right bit in las… |
TimeSlotsr/w | .1.3.6.1.4.1.164.12.4.3.3.1.1.11 |
||||||||||||||||||
|
atmCbrCnfgTxBytesPerCell
number of bytes to be transmit in order per cell to low the delay.
|
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.4.3.3.1.1.12 |
||||||||||||||||||
|
atmCbrCnfgParity
Controls the use of pointer parity when using
the STRUCTURED or STRUCTURED WITH POINTER connection type. as defined by atmCbrCnfgService. ON - Pointer parity bit generation at the transmit side, an… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.12.4.3.3.1.1.13 |
||||||||||||||||||
|
atmCbrCnfgRowStatus
This object is used to create a new row or
modify or delete an existing row in this table. |
SNMPv2-TCRowStatusr/w Enumerated Values:
Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.12.4.3.3.1.1.14 |
||||||||||||||||||
|
atmCbrCnfgService
Define if DSx service is structured or unstructured.
A structured(3) interface is some nx64Kbps. (n x DS0 = n Time Slots) An unstructured (2) interface is full DSx, x >0. (1.544Mbps, 2.048Mbps, 6.312Mbps, 44.736 Mbps,… |
Enumerationr/w | .1.3.6.1.4.1.164.12.4.3.3.1.1.15 |
atmCESConfExtnsTable
table.1.3.6.1.4.1.164.12.4.3.3.2
·
1 row entry
·
9 columns
This table defines virtual connections between ATM port and DS1-CBR port.
An entry defines virtual connection between ATM port and
DS1-CBR port.
DS1-CBR port.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
atmCESLastChange
The value of sysUpTime at the time the ATM to CBR
connection entered its mandatory operational state. If the mandatory state was entered prior to the last re-initialization of the local network management subsystem, the… |
SNMPv2-TCTimeStamp Enumerated Values:
Textual Convention: SNMPv2-TCTimeStamp Unsigned32 |
.1.3.6.1.4.1.164.12.4.3.3.2.1.1 |
||||||||||||||||||
|
atmCESRxBytesPerCell
Number of bytes to be received per cell, in order to decrease the delay.
|
Integer32r/w | .1.3.6.1.4.1.164.12.4.3.3.2.1.2 |
||||||||||||||||||
|
atmCESTxBytesPerCell
Number of bytes to be transmitted per cell, in order to decrease the delay.
|
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.12.4.3.3.2.1.3 |
||||||||||||||||||
|
atmCESAal1Type
Type of CBR connection: CES , DBCES or transparent .
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.12.4.3.3.2.1.4 |
||||||||||||||||||
|
atmCESParity
Indicate if we'll add even parity to the pointer of the structure of CES.
|
Enumerationr/w | .1.3.6.1.4.1.164.12.4.3.3.2.1.5 |
||||||||||||||||||
|
atmCESSigType
type of signalling for a DBCES connection.
Must be 'other' for CES connection. |
Enumerationr/w | .1.3.6.1.4.1.164.12.4.3.3.2.1.6 |
||||||||||||||||||
|
atmCESSigABBits
This attribute is applicable only when value of atmCESSigType is other.
Represents the AB bits for Rx/Tx and their masks in this way: bits 7..6: Tx AB bits value, bits 5..4: Tx AB bits mask, bits 3..2: Rx AB bits value,… |
OctetStringr/w Enumerated Values:
|
.1.3.6.1.4.1.164.12.4.3.3.2.1.7 |
||||||||||||||||||
|
atmCESConnectionName
The Connection's name.
|
OctetStringr/w | .1.3.6.1.4.1.164.12.4.3.3.2.1.8 |
||||||||||||||||||
|
atmCESTcPattern
Trunk conditioning data pattern to be sent upon a DS0 fail.
Range is 0x0..0xFF. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.4.3.3.2.1.9 |
atmEtherCnfgTable
table.1.3.6.1.4.1.164.12.4.3.4.2
·
1 row entry
·
21 columns
This table defines virtual connections between ATM and ATM-BridgedEthernet endpoints.
An entry defines virtual connection between ATM and
ATM-Ethernet endpoint.
ATM-Ethernet endpoint.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
atmEtherCnfgCrossConnectIndex
A unique value to identify this cross-connect.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.4.3.4.2.1.1 |
||||||||||||
|
atmEtherCnfgAtmIfIndex
The ifIndex associated to the ATM interface.
|
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.4.3.4.2.1.2 |
||||||||||||
|
atmEtherCnfgAtmVpi
The Vpi number of the ATM end point.
|
Integer32 Constraints: range: 1-1 |
.1.3.6.1.4.1.164.12.4.3.4.2.1.3 |
||||||||||||
|
atmEtherCnfgAtmVci
The Vci number of the ATM end point.
|
Integer32 Constraints: range: 1-32 |
.1.3.6.1.4.1.164.12.4.3.4.2.1.4 |
||||||||||||
|
atmEtherCnfgEtherIfIndex
The ifIndex associated to the atm-Ethernet interface.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.4.3.4.2.1.5 |
||||||||||||
|
atmEtherCnfgMacAddr
deprecated
The DFA number of the Ethernet end point.
|
MacAddress Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.12.4.3.4.2.1.6 |
||||||||||||
|
atmEtherCnfgAdminStatus
The requested state of the ATM to Ethernet connection.
|
Enumerationr/w | .1.3.6.1.4.1.164.12.4.3.4.2.1.7 |
||||||||||||
|
atmEtherCnfgOperStatus
The real operational status of the ATM to Ethernet connection.
|
Enumeration Constraints: range: 1-8 |
.1.3.6.1.4.1.164.12.4.3.4.2.1.8 |
||||||||||||
|
atmEtherCnfgLastChange
The value of sysUpTime at the time the ATM to Ethernet
connection entered its current operational state. If the current state was entered prior to the last re-initialization of the local network management subsystem, th… |
SNMPv2-TCTimeStamp Textual Convention: SNMPv2-TCTimeStamp Unsigned32 |
.1.3.6.1.4.1.164.12.4.3.4.2.1.9 |
||||||||||||
|
atmEtherCnfgTrafficDescrIndex
The value of this object identifies the row
in the atmTrafficDescrParamTable which applies to the transmit direction of the VCL. |
ATM-TC-MIBAtmTrafficDescrParamIndexr/w Textual Convention: ATM-TC-MIBAtmTrafficDescrParamIndex Integer32Type Constraints: range: 0..2147483647 |
.1.3.6.1.4.1.164.12.4.3.4.2.1.10 |
||||||||||||
|
atmEtherCnfgEncapsulationMode
deprecated
This object define the encapsulation type requested
for the connection. it indicates if we transfer the Ethernet frame to the atm side without the Crc32- AtmBridgedEther, or with it - AtmBridgedEther_CRC. |
Enumerationr/w | .1.3.6.1.4.1.164.12.4.3.4.2.1.11 |
||||||||||||
|
atmEtherCnfgPriority
This object define the priority of connection.
The first parameter affects the transmition of cells in Conjested network is the Service Category( Cbr has the highest priority and then Vbr,Ubr ) In connections with the s… |
Enumerationr/w | .1.3.6.1.4.1.164.12.4.3.4.2.1.12 |
||||||||||||
|
atmEtherCnfgRowStatus
This object is used to create a new row or
modify or delete an existing row in this table. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.12.4.3.4.2.1.13 |
||||||||||||
|
atmEtherCnfgRouterIP
The interface IP address for SNMP requests.
|
RFC1155-SMIIpAddressr/w Enumerated Values:
Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.12.4.3.4.2.1.14 |
||||||||||||
|
atmEtherCnfgRouterMask
The interface IP address mask for SNMP requests.
|
RFC1155-SMIIpAddressr/w Enumerated Values:
Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.12.4.3.4.2.1.15 |
||||||||||||
|
atmEtherCnfgRouterFragmentation
Fragmentation. When application is not router value must be 'notApplicable'.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.12.4.3.4.2.1.16 |
||||||||||||
|
atmEtherCnfgRouterRIPMode
RIP Mode. When application is not router value must be 'notApplicable'.
|
Enumerationr/w | .1.3.6.1.4.1.164.12.4.3.4.2.1.17 |
||||||||||||
|
atmEtherCnfgRouterMTU
deprecated
.
|
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.4.3.4.2.1.18 |
||||||||||||
|
atmEtherCnfgPPPEncapsulation
This object define the encapsulation type requested
for the connection. rfc1483 - Multiprotocol Encapsulation over ATM Adaptation Layer 5 (no PPP), LLC Muxed. … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.12.4.3.4.2.1.19 |
||||||||||||
|
atmEtherCnfgAllocatedBuffers
This object enables user to limit the amount of buffers
used by the connection. The limit set by this object will give the effect of a virtual buffer pool per connection. The user can allocate between … |
Integer32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.12.4.3.4.2.1.20 |
||||||||||||
|
atmEtherCnfgPauseTrigger
Enable/Disable LAN Pause triger from WAN connection
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.12.4.3.4.2.1.21 |
atmTranslateTable
table.1.3.6.1.4.1.164.12.4.3.5.1
·
1 row entry
·
4 columns
This table translates the three of AtmIfIndex,AtmVpi,AtmVci to ifIndex of the interface on the user port's side.
An entry includes the User side interface's ifIndex of any virtual
connection along with the ATM connection indices.
connection along with the ATM connection indices.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
atmTranslateAtmIfIndex
The ifIndex associated to the ATM interface.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.4.3.5.1.1.1 |
||||
|
atmTranslateAtmVpi
The Vpi number of the ATM end point.
|
Integer32 Enumerated Values:
|
.1.3.6.1.4.1.164.12.4.3.5.1.1.2 |
||||
|
atmTranslateAtmVci
The Vci number of the ATM end point.
|
Integer32 | .1.3.6.1.4.1.164.12.4.3.5.1.1.3 |
||||
|
atmTranslateUserIfIndex
The ifIndex associated to the user interface.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.4.3.5.1.1.4 |
imaXLinkTable
table.1.3.6.1.4.1.164.12.5.2
·
1 row entry
·
3 columns
The IMA Link Status and Configuration table. This table contains additional objects for the link table.
An entry in the IMA Link table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
imaLinkDirection
the Link direction.
|
Enumerationr/w | .1.3.6.1.4.1.164.12.5.2.1.1 |
|
imaLinkItcLBClkSrc
Clock source for the current Tx-line.
|
Enumerationr/w | .1.3.6.1.4.1.164.12.5.2.1.2 |
|
imaLinkActivation
IMA Link activation at ATM layer.
|
Enumerationr/w | .1.3.6.1.4.1.164.12.5.2.1.3 |
imaXGroupTable
table.1.3.6.1.4.1.164.12.5.3
·
1 row entry
·
5 columns
The IMA group Status and Configuration table. This table contains additional objects for the Group table.
An entry in the IMA Group table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
imaGroupVersion
IMA Version.
|
Enumerationr/w | .1.3.6.1.4.1.164.12.5.3.1.1 |
|
imaGroupCtcTxClkSrc
The source of the transmitted, common, Clock Source.
Applicable if imaGroupNeTxClkMode=ctc(1). Automatic - Dynamic source, taken from the currently reference link. Internal - taken from the Internal clock on card. Loo… |
Enumerationr/w | .1.3.6.1.4.1.164.12.5.3.1.2 |
|
imaGroupCtcTxClkSrcPort
This parameter is valid only when imaGroupCtcTxClkSrc=loopback.
The value may be any port identifier. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.5.3.1.3 |
|
imaGroupRestart
off(1)- default state.
After on(2) operation ends, value should be automatically set to off(1). on(2) - restarts the IMA Group State Machine (GSM) and the Rx\Tx Link State Machines (Rx/Tx LSM). |
Enumerationr/w Constraints: range: 1-96 |
.1.3.6.1.4.1.164.12.5.3.1.4 |
|
imaGroupType
This parameter defines the Type of IMA Group
(which determines its Links Type). |
Enumerationr/w | .1.3.6.1.4.1.164.12.5.3.1.5 |
atmLayer2XVclTable
table.1.3.6.1.4.1.164.12.7.1
·
1 row entry
·
2 columns
This table is an extension of VCL table, which is created for each LAN VCC.
Conceptual row in atmVclTable.
This table augments the RFC2515 VCL table.
This table augments the RFC2515 VCL table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
atmLayer2XVclConnMode
Each valid LAN VCC is either Main or Sub.
This parameter is configured only once on creation of a LAN VCC. It can not be changed after creation. In order to change the Mode, user should delete the connection and creat… |
Enumerationr/w | .1.3.6.1.4.1.164.12.7.1.1.1 |
|
atmLayer2XVclGroupIdx
The group identifier.
A VCC Group identifier = 0 if the VCC was not associated with a group yet. This value is updated according to the group identifier set by atmLayer2GroupTable. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.7.1.1.2 |
atmLayer2GroupTable
table.1.3.6.1.4.1.164.12.7.2
·
1 row entry
·
5 columns
This table contains groups and their members. A group is a bundle of VCCs, which acts as different queues. Main and Sub VCCs should have the same ATM slot and port, and the same LAN slot and port. Each group contains: 1 to <number of priorities> VCCs.
Conceptual row in atmLayer2GroupTable.
The indexes: ifIndex, atmVclVpi and atmVclVci indicate
the Network ATM End-Point.
Upon a group creation, one Main VCC must be added first.
After the group was created, Sub VCCs ma…
The indexes: ifIndex, atmVclVpi and atmVclVci indicate
the Network ATM End-Point.
Upon a group creation, one Main VCC must be added first.
After the group was created, Sub VCCs ma…
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
atmLayer2GroupIdx
The group identifier.
0 is not a valid index. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.7.2.1.1 |
||||||||||||
|
atmLayer2GroupRowStatus
Creation/Deletion of rows in the table, and indication of the
entry's status. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.12.7.2.1.2 |
||||||||||||
|
atmLayer2GroupConnMode
Each valid LAN VCC is either Main or Sub as configured in
atmLayer2XVclTable. |
Enumeration | .1.3.6.1.4.1.164.12.7.2.1.3 |
||||||||||||
|
atmLayer2GroupConnPriority
This parameter is configured by atmLayer2PriorityRx from
atmLayer2PriorityTable. Each bit in the Octet represents a specific priority as follows: MSB 7 6 5 4 … |
OctetString Enumerated Values:
|
.1.3.6.1.4.1.164.12.7.2.1.4 |
||||||||||||
|
atmLayer2GroupName
Group name. Configured by the user.
The name is unique per system. For atmLayer2GroupIdx=0, the name will be null. |
OctetStringr/w | .1.3.6.1.4.1.164.12.7.2.1.5 |
atmLayer2PriorityTable
table.1.3.6.1.4.1.164.12.7.3
·
1 row entry
·
5 columns
This table maps all priorities inside a group. Several priorities might be mapped to the same VCC. Upon priority change, the agent will update the VCCs of the changed priority in this table, and will update - atmLayer2GroupConnPriority parameter of both former and new owners of the changed priority. Changing a VCC value is actually a change of three parameters simultaneously: atmLayer2PriorityIfIndex, atmLayer2PriorityVclVpi and atmLayer2PriorityVclVci. Otherwise, the set will be rejected, since there might be that such VCC doesn't exist in the specific group.
Conceptual row in atmLayer2PriorityTable.
Each entry is a Network ATM End-Point per priority.
Upon a group creation, all priorities are mapped to the Main VCC.
Number of entries per group is according to the number of …
Each entry is a Network ATM End-Point per priority.
Upon a group creation, all priorities are mapped to the Main VCC.
Number of entries per group is according to the number of …
Indexes
pwIdx
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
atmLayer2PriorityGroupIdx
The group identifier.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.7.3.1.1 |
||||||
|
atmLayer2PriorityRx
The priority values.
The used values are 0-7, but since this value is part of the index of the table, and in order to avoid '0' as an index, the index syntax is 1..8, but the real value is atmLayer2PriorityRx-1: 0 … |
Integer32 | .1.3.6.1.4.1.164.12.7.3.1.2 |
||||||
|
atmLayer2PriorityIfIndex
ATM ifIndex of the network End-Point.
|
IF-MIBInterfaceIndexr/w Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.164.12.7.3.1.3 |
||||||
|
atmLayer2PriorityVclVpi
Vpi of the network End-Point.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.7.3.1.4 |
||||||
|
atmLayer2PriorityVclVci
Vci of the network End-Point.
|
SNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.7.3.1.5 |
atmLayer2CfgTable
table.1.3.6.1.4.1.164.12.7.5
·
1 row entry
·
9 columns
Bridge configuration Table. This table supports multi-bridge and bridge features within an ATM device.
Conceptual row in atmLayer2CfgTable.
Each entry in this table contains the bridging attributes for
both Ethernet and ATM sides.
The interface index is the Ethernet port interface.
For Ace52: this object rep…
Each entry in this table contains the bridging attributes for
both Ethernet and ATM sides.
The interface index is the Ethernet port interface.
For Ace52: this object rep…
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
atmLayer2CfgBridgingMode
Bridging mode can be one of the following:
ATM <> Ethernet - Bridging is between the Ethernet port and the ATM port (there is no bridging between VCs). ATM <> Ethernet + ATM - Bridging is done both between the Ethern… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.12.7.5.1.1 |
||||||||
|
atmLayer2CfgVlanMode
VLAN Mode. Upon Mode changing, all LAN VCCs will be deleted
by the agent from all tables that include LAN VCCs. |
Enumerationr/w | .1.3.6.1.4.1.164.12.7.5.1.2 |
||||||||
|
atmLayer2CfgAtmAcceptableFrameType
The Frame Type that will be acceptable by the VCCs that
are associated with this Ethernet port. Frames which don't match the selected type will be discarded. admitAll - all frames will be acc… |
Enumerationr/w | .1.3.6.1.4.1.164.12.7.5.1.3 |
||||||||
|
atmLayer2CfgAtmIngressFiltering
For the VCCs that are associated with this Ethernet port,
when this is true(1) the device will discard incoming frames for VLANs which do not include this Port in its Member set. When false(2), the port will accept al… |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.164.12.7.5.1.4 |
||||||||
|
atmLayer2CfgAtmTxFrameType
The Frame Type that will be transmitted by the VCCs that
are associated with this Ethernet port. unTagged - The transmitted frames will be unTagged. tagged - The transmitted frames will be T… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.12.7.5.1.5 |
||||||||
|
atmLayer2CfgEthAcceptableFrameType
The Frame Type that this Ethernet port will accept.
(for ACE-52: the Frame Type that this Bridge will accept) This parameter is notApplicable for atmLayer2VlanMode=disable. Frames which don't match the selected type wil… |
Enumerationr/w Constraints: range: 1-4095 |
.1.3.6.1.4.1.164.12.7.5.1.6 |
||||||||
|
atmLayer2CfgBridgeAction
This object enables to perform the specified action on the
selected port. |
Enumerationr/w Constraints: range: 0-7 |
.1.3.6.1.4.1.164.12.7.5.1.7 |
||||||||
|
atmLayer2CfgLearningMode
This object specifies the mode of the learning process of a bridge.
svl - Shared VLAN process. If an individual MAC Address is learned in one VLAN, this information is used in forwarding decisions taken for… |
Enumerationr/w | .1.3.6.1.4.1.164.12.7.5.1.8 |
||||||||
|
atmLayer2CfgAgingTime
The timeout period in seconds for aging out
dynamically learned forwarding information. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.7.5.1.9 |
frAtmIwfXConnectionTable
table.1.3.6.1.4.1.164.12.8.1
·
1 row entry
·
2 columns
This table is an extension of frAtmIwfXConnectionTable from RFC2955.
Conceptual row in frAtmIwfXConnectionTable.
This table augments the RFC2955.
This table augments the RFC2955.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
frAtmIwfXConnMode
FR IWF Mode.
service - Service InterWorking (FRF.8), network - Network InterWorking (FRF.5). |
Enumerationr/w | .1.3.6.1.4.1.164.12.8.1.1.1 |
|
frAtmIwfXConnSscsDlci
This parameter is relevant for
frAtmIwfXConnMode=network (FRF.5) only. This parameter allow configuration of the FR SSCS DLCI that is transferred to the remote FR unit. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.8.1.1.2 |
atmCesAal1CurrentTable
table.1.3.6.1.4.1.164.12.9.1.1
·
1 row entry
·
6 columns
The AAL1 Current table.
An entry in the AAL1 Current table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
atmCesAal1CurrentIfIndex
The index of the AAL1 interface.
It may be ifIndex. |
SNMPv2-SMIInteger32 Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.9.1.1.1.1 |
||||
|
atmCesAal1CurrentSeqErrors
The counter associated with the number of Discarded
cells due to wrong sequence number, encountered by an AAL1 interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.9.1.1.1.2 |
||||
|
atmCesAal1CurrentHdrErrors
The counter associated with the number of Discarded
cells due to bad AAL1 header error (including correctable and uncorrectable CRC, and bad parity), encountered by an AAL1 interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.9.1.1.1.3 |
||||
|
atmCesAal1CurrentPointerReframes
The counter associated with the number of events in
which a SDT pointer isn't where it is expected to be, and must be reacquired, encountered by an AAL1 interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.9.1.1.1.4 |
||||
|
atmCesAal1CurrentBufUnderflows
The counter associated with the number of buffer
underflow events, encountered by an AAL1 interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.9.1.1.1.5 |
||||
|
atmCesAal1CurrentBufOverflows
The counter associated with the number of buffer
overflow events, encountered by an AAL1 interface in the current 15 minute interval. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.9.1.1.1.6 |
atmCesAal1IntervalTable
table.1.3.6.1.4.1.164.12.9.1.2
·
1 row entry
·
7 columns
The AAL1 Interval table.
An entry in the AAL1 Interval table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
atmCesAal1IntervalIfIndex
The index of the AAL1 interface.
It may be ifIndex. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.164.12.9.1.2.1.1 |
||||||
|
atmCesAal1IntervalNumber
A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals exist). |
Integer32 | .1.3.6.1.4.1.164.12.9.1.2.1.2 |
||||||
|
atmCesAal1IntervalSeqErrors
The counter associated with the number of Discarded
cells due to wrong sequence number, encountered by an AAL1 interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.9.1.2.1.3 |
||||||
|
atmCesAal1IntervalHdrErrors
The counter associated with the number of Discarded
cells due to bad AAL1 header error (including correctable and uncorrectable CRC, plus bad parity), encountered by an AAL1 interface in one of the previous 96, indi… |
SNMPv2-SMIGauge32 Enumerated Values:
Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.9.1.2.1.4 |
||||||
|
atmCesAal1IntervalPointerReframes
The counter associated with the number of events in
which a SDT pointer isn't where it is expected to be, and must be reacquired, encountered by an AAL1 interface in one of the previous 96, individual 15 minute, int… |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.9.1.2.1.5 |
||||||
|
atmCesAal1IntervalBufUnderflows
The counter associated with the number of buffer
underflow events, encountered by an AAL1 interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.9.1.2.1.6 |
||||||
|
atmCesAal1IntervalBufOverflows
The counter associated with the number of buffer
overflow events, encountered by an AAL1 interface in one of the previous 96, individual 15 minute, intervals. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.12.9.1.2.1.7 |
atmCesXConfTable
table.1.3.6.1.4.1.164.12.9.2.1
·
1 row entry
·
1 columns
This table is an extension of atmfCESConfTable table.
Conceptual row in atmfCESConfTable.
A new row is created in this table upon each new CES VCC creation.
A new row is created in this table upon each new CES VCC creation.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
atmCesXConfCBRMode
This parameter defines if to use Spaced or Normal CBR.
Normal - TD will be allocated from the policing range (described in ACE2002 NMS SRS). The PCR is expanded with a constant value… |
Enumerationr/w | .1.3.6.1.4.1.164.12.9.2.1.1.1 |
.1.3.6.1.4.1.164.12.10.1
·
1 row entry
·
2 columns
This table is an extension of a table from RFC 2320: ipoaLisIfMappingTable - The ATM Logical IP Subnet Interface Mapping Table.
Conceptual row in ipoaLisIfMappingTable.
Indexes
pwIdx
| Column | Syntax | OID |
|---|---|---|
|
atmIpoaLisIfMappingType
This object indicates the Mapping Type.
|
Enumerationr/w | .1.3.6.1.4.1.164.12.10.1.1.1 |
|
atmIpoaLisIfMappingIPAddress
This parameter is applicable for
atmIpoaLisIfMappingTypeIP=static(2). This parameter is the IP Address assigned by the user when applicable. |
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.12.10.1.1.2 |
pwGenTable
table.1.3.6.1.4.1.164.14.1.1.1
·
1 row entry
·
19 columns
This table contains general configuration for PW connection.
This table is indexed by pwIdx, the value of which is equal
to the same index that was created for the associated entry
in the PW Table (in the PW-STD-MIB)- the pwIndex.
An entry is created in this table by the agent …
to the same index that was created for the associated entry
in the PW Table (in the PW-STD-MIB)- the pwIndex.
An entry is created in this table by the agent …
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
pwIdx
Index of this table.
The value for this object is equal to the value of pwIndex from the pwTable of PW-STD-MIB |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.14.1.1.1.1.1 |
||||||||||||
|
pwGenPeerIdx
This object indicates the Index of the Peer
(as it is defined in the Peer Table), which terminated this PW. |
SNMPv2-SMIUnsigned32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.14.1.1.1.1.2 |
||||||||||||
|
pwGenAttachmentCircuit
This is a unique index within the ifTable. It represents
the attached circuit interface (e.g ATM VC, HDLC) attached to this PW connection (from service initiator side). A value of zero indicates an inte… |
IF-MIBInterfaceIndexOrZeror/w Enumerated Values:
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32Type Constraints: range: 0..2147483647 |
.1.3.6.1.4.1.164.14.1.1.1.1.3 |
||||||||||||
|
pwGenOutgoingInterface
This is a unique index within the ifTable. It represents
the outgoing interface (towards the PSN ) attached to this PW connection. This object is applicable only for MPLS peer, for device without … |
IF-MIBInterfaceIndexOrZeror/w Enumerated Values:
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32Type Constraints: range: 0..2147483647 |
.1.3.6.1.4.1.164.14.1.1.1.1.4 |
||||||||||||
|
pwGenOamMode
This objects defines whether OAM will be enabled on this PW.
notApplicable(1) value will be used when PW type does not support OAM. |
Enumerationr/w | .1.3.6.1.4.1.164.14.1.1.1.1.5 |
||||||||||||
|
pwGenOamType
This objects defines the failure detection mechanism used
on this PW. BFD - Bidirectional Forwarding Detection notApplicable(1) value will be used when pwGenOamMode is notApplicable. |
Enumerationr/w | .1.3.6.1.4.1.164.14.1.1.1.1.6 |
||||||||||||
|
pwGenSequenceNumberField
This object defines whether processing of Sequence Number field
(ATM cell encapsulation) will be done by device, on this PW. |
Enumerationr/w | .1.3.6.1.4.1.164.14.1.1.1.1.7 |
||||||||||||
|
pwGenNextHopType
Indicates address type of the Next Hop.
Not applicable for device with router. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.14.1.1.1.1.8 |
||||||||||||
|
pwGenNextHop
Not applicable (=0) when pwMplsEgressTunnelNextHopType=notApplicable.
When applicable, represents ATM VC, Bridge Port, according to pwMplsEgressTunnelNextHopType. |
SNMPv2-SMIUnsigned32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.14.1.1.1.1.9 |
||||||||||||
|
pwGenIpNextHop
This object defines local Next Hop IP Address for this PW.
0.0.0.0 - means - not applicable. This object is applicable only when pwGenNextHopType=ipV4 |
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.14.1.1.1.1.10 |
||||||||||||
|
pwGenMacNextHop
This object defines local Next Hop MAC Address for this PW.
0:0:0:0:0:0 - means - not applicable. This object is applicable only when pwGenNextHopType=bridgePort |
MacAddressr/w Textual Convention: MacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.164.14.1.1.1.1.11 |
||||||||||||
|
pwGenEnableVlanTag
This object enables or diables a VLAN tag on
every transmitted paket via this PW connection |
Enumerationr/w | .1.3.6.1.4.1.164.14.1.1.1.1.12 |
||||||||||||
|
pwGenVlanId
This object indicates the VLAN ID tag attached
to every transmitted packet via this PW connection. This entry is applicable only if pwGenEnableVlanTag=enabled (3). |
Unsigned32r/w Constraints: range: 10-10range: 17-17range: 24-24 |
.1.3.6.1.4.1.164.14.1.1.1.1.13 |
||||||||||||
|
pwGenVlanPriority
This object indicates the VLAN priority assigned
to every transmitted packet via this PW connection. This entry is applicable only if pwGenEnableVlanTag=enabled (3) |
Unsigned32r/w Enumerated Values:
|
.1.3.6.1.4.1.164.14.1.1.1.1.14 |
||||||||||||
|
pwGenIpTos
This object indicates TOS field value
for pw having pwPsnType= ip (3) |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.14.1.1.1.1.15 |
||||||||||||
|
pwGenSourceUdpPort
This object indicates source UDP port (1...65535) value
for pw having pwPsnType= ip (3) |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.14.1.1.1.1.16 |
||||||||||||
|
pwGenSubType
This object indicates the PW Sub Type
(i.e. Sub Type of 'pwType' from 'pwTable'). For ACE-3000 devices: It is applicable only when pwType = basicCesPsn(21). |
Enumerationr/w | .1.3.6.1.4.1.164.14.1.1.1.1.17 |
||||||||||||
|
pwGenSourceIpAddress
Source IP Address per PW
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.14.1.1.1.1.18 |
||||||||||||
|
pwGenSourceIpMask
Source IP Mask per PW
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.164.14.1.1.1.1.19 |
pwGenLabelTable
table.1.3.6.1.4.1.164.14.1.1.5
·
1 row entry
·
4 columns
This table defines supported range of PW labels.
Entry in this table defines range of PW labels in the direction and type
indicated by pwGenLabelType and pwGenLabelDirection.
indicated by pwGenLabelType and pwGenLabelDirection.
Indexes
pwIdx pwPerfIntervalXNumber
| Column | Syntax | OID |
|---|---|---|
|
pwGenLabelType
This object defines type of label.
|
Enumeration Constraints: range: 1-96 |
.1.3.6.1.4.1.164.14.1.1.5.1.1 |
|
pwGenLabelDirection
This object defines PW direction.
|
Enumeration | .1.3.6.1.4.1.164.14.1.1.5.1.2 |
|
pwGenLabelMinValue
This object defines minimum value of PW labels,
in the direction and type indicated by pwGenLabelType and pwGenLabelDirection. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.14.1.1.5.1.3 |
|
pwGenLabelMaxValue
This object define maximum value of PW labels,
in the direction and type indicated by pwGenLabelType and pwGenLabelDirection. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.14.1.1.5.1.4 |
peerTable
table.1.3.6.1.4.1.164.14.1.1.6
·
1 row entry
·
9 columns
The Peer Table
An entry in this table.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
peerIndex
This object represents the Peer Index.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.14.1.1.6.1.1 |
||||||||||||||
|
peerRowStatus
This object is used for creating, modifying and deleting
a row of this table. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.14.1.1.6.1.2 |
||||||||||||||
|
peerAddressType
This object represents the Address Type of the Peer node.
It should be set to 'unknown' if PE/PW maintenance protocol is not used and the address is unknown. |
INET-ADDRESS-MIBInetAddressTyper/w Textual Convention: INET-ADDRESS-MIBInetAddressType EnumerationType Values:
|
.1.3.6.1.4.1.164.14.1.1.6.1.3 |
||||||||||||||
|
peerAddress
This object represents the Peer node Address.
of the PW/PE maintenance protocol entity. This object SHOULD contain a value of all zeroes if not applicable (peerAddrType is 'unknown'). |
INET-ADDRESS-MIBInetAddressr/w Textual Convention: INET-ADDRESS-MIBInetAddress OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.14.1.1.6.1.4 |
||||||||||||||
|
peerName
This object represents the Peer Name.
|
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Constraints: range: 1-96Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.14.1.1.6.1.5 |
||||||||||||||
|
peerNoOfUsages
This object indicates the number of times this Peer is used
(by PWs, Egress LSP Tunnels etc). |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.14.1.1.6.1.6 |
||||||||||||||
|
peerTargeted
This object indicates whether the Peer is configured
as a Targeted Peer or not. |
Enumerationr/w | .1.3.6.1.4.1.164.14.1.1.6.1.7 |
||||||||||||||
|
peerNextHopAddressType
This object represents the Address Type of the Peer Next Hop node.
It should be set to 'unknown' if the address is unknown. |
INET-ADDRESS-MIBInetAddressTyper/w Textual Convention: INET-ADDRESS-MIBInetAddressType EnumerationType Values:
|
.1.3.6.1.4.1.164.14.1.1.6.1.8 |
||||||||||||||
|
peerNextHopAddress
This object represents the Peer Next Hop node Address.
This object SHOULD contain a value of all zeroes if not applicable (peerAddrType is 'unknown'). |
INET-ADDRESS-MIBInetAddressr/w Textual Convention: INET-ADDRESS-MIBInetAddress OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.164.14.1.1.6.1.9 |
pwMplsCfgTable
table.1.3.6.1.4.1.164.14.1.2.1.1
·
1 row entry
·
2 columns
This table contains MPLS PSN related configuration for PW connection.
This table is indexed by pwIdx, the value of which is equal
to the same index that was created for the associated entry
in the PW Table (in the PW-STD-MIB)- the pwIndex.
An entry is created in this table by the agent f…
to the same index that was created for the associated entry
in the PW Table (in the PW-STD-MIB)- the pwIndex.
An entry is created in this table by the agent f…
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
pwMplsCfgIngressTunnel
This object points to an entry of pwMplsIngressTunnelTable.
Its value is equal to pwMplsIngressTunnelIndex |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.14.1.2.1.1.1.1 |
|
pwMplsCfgEgressTunnel
This object points to an entry of pwMplsEgressTunnelTable.
Its value is equal to pwMplsEgressTunnelIndex. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.14.1.2.1.1.1.2 |
pwTDMoIpTable
table.1.3.6.1.4.1.164.14.1.3.1.1
·
1 row entry
·
1 columns
This table contains TDMoIP Service related configuration for PW connection.
This table is indexed by pwIdx, the value of which is equal
to the same index that was created for the associated entry
in the PW Table (in the PW-STD-MIB)- the pwIndex.
An entry is created in this table b…
to the same index that was created for the associated entry
in the PW Table (in the PW-STD-MIB)- the pwIndex.
An entry is created in this table b…
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
pwTDMoIpCfgIndex
Index to TDMoIP table below. Multiple TDMoIP PWs
MAY share a single pwTDMoIpCfgEntry |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.14.1.3.1.1.1.1 |
pwTDMoIpCfgTable
table.1.3.6.1.4.1.164.14.1.3.1.3
·
1 row entry
·
6 columns
This table contains TDM over IP service configuration for PW connection.
This table is indexed by pwIdx, the value of which is equal
to the same index that was created for the associated entry
in the PW Table (in the PW-STD-MIB)- the pwIndex.
An entry is created in this table b…
to the same index that was created for the associated entry
in the PW Table (in the PW-STD-MIB)- the pwIndex.
An entry is created in this table b…
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
pwTDMoIpCfgTableIndex
Index to an entry in this table
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.14.1.3.1.3.1.1 |
||||||||||||
|
pwTDMoIpCfgRowStatus
Object used for creating, modifying, and deleting
a row of this table. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.164.14.1.3.1.3.1.2 |
||||||||||||
|
pwTDMoIpCfgPayloadFormat
determine TDM over IP proprietary
payload format. |
Enumerationr/w | .1.3.6.1.4.1.164.14.1.3.1.3.1.3 |
||||||||||||
|
pwTDMoIpCfgFarEndType
Determines TDM over IP Far End type.
|
Enumerationr/w | .1.3.6.1.4.1.164.14.1.3.1.3.1.4 |
||||||||||||
|
pwTDMoIpCfgDelaySensitivity
Determines whether to optimize the clock
for accurateness or for constant delay: o Disable (Accurate clock is more important than constant delay) o Enable (Constant delay is more important than accurate clock). … |
Enumerationr/w | .1.3.6.1.4.1.164.14.1.3.1.3.1.5 |
||||||||||||
|
pwTDMoIpCfgFramesInPacket
UDP payload length - determines the ethernet packet size
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.14.1.3.1.3.1.6 |
pwAtmCfgXTable
table.1.3.6.1.4.1.164.14.1.3.2.1
·
1 row entry
·
3 columns
This table is an extension of pwAtmCfgTable of PW-ATM-R-MIB. Each row that is added/removed there will be added/removed in this table.
This table is indexed by pwIdx, the value of which is equal
to the same index that was created for the associated entry
in the PW Table (in the PW-STD-MIB)- the pwIndex.
An entry may be created by Agent in this table…
to the same index that was created for the associated entry
in the PW Table (in the PW-STD-MIB)- the pwIndex.
An entry may be created by Agent in this table…
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
pwAtmCfgAal5Mode
This objects defines whether AAL5 Mode is enabled for this PW.
|
Enumerationr/w | .1.3.6.1.4.1.164.14.1.3.2.1.1.1 |
|
pwAtmCfgAal5SduTermType
This objects defines the AAL5-SDU Termination Type.
It means - where should the AAL5-SDU PW frame, received from PSN, be forwarded: atm(2) - forwarded into ATM VCC. router(3) - forwarded into router. . |
Enumerationr/w | .1.3.6.1.4.1.164.14.1.3.2.1.1.2 |
|
pwAtmCfgTimeout
This object defines the Timeout period, measured in usec.
Timeout mechanism is used in order to send out a packet before the maximum concatenated cells limit has been reached. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.14.1.3.2.1.1.3 |
pwFrCfgTable
table.1.3.6.1.4.1.164.14.1.3.3.1
·
1 row entry
·
3 columns
This table contains a set of parameters for Frame Relay PW in the pwFrTable.
These parameters define the characteristics of a
Frame Relay PW.
This table is indexed by pwIdx, the value of which is equal
to the same index that was created for the associated entry
in the PW Table (in the PW-STD-MI…
Frame Relay PW.
This table is indexed by pwIdx, the value of which is equal
to the same index that was created for the associated entry
in the PW Table (in the PW-STD-MI…
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
pwFrCfgDlciFieldLength
DLCI Field length in bytes. Possible values ae
10, 17 or 24 |
Unsigned32r/w | .1.3.6.1.4.1.164.14.1.3.3.1.1.1 |
|
pwFrCfgBitMarking
This object defines which Frame Relay bits are copied
into the outgoing interface or from the incoming interface. When labeled bit is 1, FR bit is copied. For incoming FR bits - DE, FECN and BECN: DE - pwFrDeIncomingM… |
Bitsr/w | .1.3.6.1.4.1.164.14.1.3.3.1.1.2 |
|
pwFrCfgDlci
DLCI value of Frame Relay VC associated with this PW.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.14.1.3.3.1.1.3 |
pwPerfCurrentXTable
table.1.3.6.1.4.1.164.14.2.1
·
1 row entry
·
2 columns
This table is an extension of pwPerfCurrentTable (PW-STD-R-MIB).
An entry in a table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
pwPerfCurrentInCongestDropPackets
The counter for number of received packets that are dropped
due to congestion by the PW (from the PSN) in the current 15-minute interval. |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.14.2.1.1.1 |
|
pwPerfCurrentOutCongestDropPackets
The counter for number of transmitted packets that are dropped
due to congestion by the PW (to the PSN) in the current 15-minute interval. |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.14.2.1.1.2 |
pwPerfIntervalXTable
table.1.3.6.1.4.1.164.14.2.2
·
1 row entry
·
3 columns
This table is an extension of pwPerfIntervalTable (PW-STD-R-MIB).
An entry in a table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
pwPerfIntervalXNumber
A number N, between 1 and 96, which identifies the
interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified b… |
Integer32 | .1.3.6.1.4.1.164.14.2.2.1.1 |
|
pwPerfIntervalInCongestDropPackets
The counter for number of received packets that are dropped
due to congestion by the PW (to the PSN) during the interval. |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.14.2.2.1.2 |
|
pwPerfIntervalOutCongestDropPackets
The counter for number of transmitted packets that are dropped
due to congestion by the PW (to the PSN) during the interval. |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.14.2.2.1.3 |
pwAtmPerfCurrentXTable
table.1.3.6.1.4.1.164.14.2.3
·
1 row entry
·
3 columns
This table is an extension of pwArmPerfCurrentTable (PW-ATM-R-MIB).
An entry in a table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
pwAtmPerfCurrentInDiscardTotalCells
The number of total received cells (CLP0 and CLP1)
that were discarded by the traffic policer, in the current 15-minute interval. |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.14.2.3.1.1 |
|
pwAtmPerfCurrentInDiscardClp0Cells
The number of received CLP0 cells
that were discarded by the traffic policer, in the current 15-minute interval. |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.14.2.3.1.2 |
|
pwAtmPerfCurrentTaggedCells
The number of cells that were tagged
by the traffic policer from CLP=0 to CLP=1, in the current 15-minute interval. |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.4.1.164.14.2.3.1.3 |
pwAtmPerfIntervalXTable
table.1.3.6.1.4.1.164.14.2.4
·
1 row entry
·
4 columns
This table is an extension of pwAtmPerfIntervalTable (PW-ATM-R-MIB).
An entry in a table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
pwAtmPerfIntervalXNumber
A number N, between 1 and 96, which identifies the
interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified b… |
Integer32 | .1.3.6.1.4.1.164.14.2.4.1.1 |
|
pwAtmPerfIntervalInDiscardTotalCells
The number of total received cells (CLP0 and CLP1)
that were discarded by the traffic policer, during the interval. |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.14.2.4.1.2 |
|
pwAtmPerfIntervalInDiscardClp0Cells
The number of received CLP0 cells
that were discarded by the traffic policer, during the interval. |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.14.2.4.1.3 |
|
pwAtmPerfIntervalTaggedCells
The number of cells that were tagged
by the traffic policer from CLP=0 to CLP=1, during the interval. |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.4.1.164.14.2.4.1.4 |