atmNteManagerRowStatus
RAD-MIB ·
.1.3.6.1.4.1.164.12.3.1.1.1.1.7
Object
Creation/Deletion of rows in the table.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.12.3.1.1.1.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- atmNteManagerEntry
- Table
- atmNteManagerTable
- Siblings
- 12
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| atmNteManagerIP The IP address of the NMS. | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.164.12.3.1.1.1.1.1 |
| atmNteManagerVlanIdentifier VLAN ID. Range is 0..4095. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.3.1.1.1.1.10 |
| atmNteManagerVlanFramePriority VLAN Frame priority.Range is 0..7. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.3.1.1.1.1.11 |
| atmNteManagerAlarmTrapMask The value of this object determines the alarm traps that the
agent should mask and not send to this NMS.
The value is an Octet String, where each bit is assigned … | column | OctetString | .1.3.6.1.4.1.164.12.3.1.1.1.1.12 |
| atmNteManagerConfigPorts This variable defines from which port/s this manager can configure the device.
For IPmux 11 the value of this variable will be according to the ports
combination:
Network =1
User… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.3.1.1.1.1.13 |
| atmNteManagerPvc A PVC index. The range is 1..8. There are four PVCs
on the User Port and four PVCs on the Network Port.
The default VPI, VCI values are specified below. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.3.1.1.1.1.2 |
| atmNteManagerIfIndex The ATM interface index of the management port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.3.1.1.1.1.3 |
| atmNteManagerVpi The VPI of the management VCL. Default: 0. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.3.1.1.1.1.4 |
| atmNteManagerVci The VCI of the management VCL. Defaults: 32,33,34,35. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.3.1.1.1.1.5 |
| atmNteManagerTrapMask The value of this attribute determines the type of traps the
agent should mask and not send to this NMS. The
value is differently determined for different products. There are
m… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.3.1.1.1.1.6 |
| atmNteManagerNextHop This parameter is relevant to Ethernet out of band
host only (PVC=10).
The Next Hop IP address of the entry route. | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.164.12.3.1.1.1.1.8 |
| atmNteManagerVlanSupport VLAN support (Tagging).
no - No support to VLAN.
yes - 4 VLAN bytes will be added to the frame. | column | Enumeration | .1.3.6.1.4.1.164.12.3.1.1.1.1.9 |