mdlSAlrStatusAll

RAD-MIB · .1.3.6.1.4.1.164.3.1.3.1.1.1.6

Object

column Enumeration

Indicates the alarm state in the module-all level, i.e. lower level
(port alarms) included.
This attribute will be set to:
  critical(7) - when there is at least one active (state ON)
                critical alarm,
                otherwise it will be set to
     major(5) - when there is at least one active (state ON)
                major alarm,
                otherwise it will be set to
     minor(4) - if there is at least one active (state ON) minor
                alarm,
                otherwise it will be set to
     warning(6) - if there is at least one active (state ON)
                warning alarm,
                otherwise it will be set to
     event(3) - if there was at least one alarm event (including
                state on,off events) since the last clear operation.

Context

MIB: RAD-MIB
OID: .1.3.6.1.4.1.164.3.1.3.1.1.1.6
Type: column
Access: readonly
Status: current
Parent: mdlSInstEntry
Table: mdlSInstTable
Siblings: 11

Syntax

Enumeration

Values & Constraints

Enumerated Values

`2`	external
`3`	internal
`4`	highSpeedV35
`5`	highSpeedV24
`6`	highSpeedV36
`7`	highSpeedX21
`8`	highSpeedG703
`9`	highSpeedDDS
`10`	lowSpeed
`11`	voice
`12`	cl
`13`	isdns
`14`	isdnu
`15`	ethernet
`16`	voiceS0
`17`	voiceU
`18`	voiceQsigS
`19`	voiceQsigU

Related Objects

Sibling Objects

Object	Type	Syntax	OID
mdlSInstSltIdx A unique number to identify a slot position in the mux. In the ?004 Unit the entries PsB(2),ClB(4),io6(10)..io(16) are not valid. For the Vmux2100 Main Board clA (3) is used.	column	Enumeration	`.1.3.6.1.4.1.164.3.1.3.1.1.1.1`
mdlSClearAlrCmd Setting this command to ON, enforces a clear of all the alarms in the given slot, excluding alarms of port level. The clear operation will not be applied for masked/inverted alarm…	column	Enumeration	`.1.3.6.1.4.1.164.3.1.3.1.1.1.10`
mdlSClearAllAlrCmd Setting this command to ON, enforces a clear of all the alarms in the given slot, including all its ports alarms. The clear operation will not be applied for masked/inverted alar…	column	Enumeration	`.1.3.6.1.4.1.164.3.1.3.1.1.1.11`
mdlSTemperature Temperature of the card, in Celsius degrees.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.1.3.1.1.1.12`
mdlSInstCardType This attribute indicates the type of card installed in the specific slot position. Only PS cards are possible in the PS slots. Only CL cards are possible in the CL slots. Only IO …	column	Enumeration	`.1.3.6.1.4.1.164.3.1.3.1.1.1.2`
mdlSHwVersion This attribute indicates the Hardware version of the installed card in the specific slot position.	column	OctetString	`.1.3.6.1.4.1.164.3.1.3.1.1.1.3`
mdlSSwVersion This attribute indicates the Software version of the installed card in the specific slot position.	column	OctetString	`.1.3.6.1.4.1.164.3.1.3.1.1.1.4`
mdlSAlrStatus Indicates the alarm state at module level, i.e. lower level (port alarms) status is not included. This attribute will be set to: critical(7) - when there is at least one active …	column	Enumeration	`.1.3.6.1.4.1.164.3.1.3.1.1.1.5`
mdlSMaskedAlrStat Indicates the alarm state at module level, [i.e. lower level (port alarms) status is not included],including Masked alarms. This attribute will be set to: critical(7) - when the…	column	Enumeration	`.1.3.6.1.4.1.164.3.1.3.1.1.1.7`
mdlSMaskedAlrStatAll Indicates the alarm state in the module-all level, i.e. lower level (port alarms) included, including Masked alarms. This attribute will be set to: critical(7) - when there is a…	column	Enumeration	`.1.3.6.1.4.1.164.3.1.3.1.1.1.8`
mdlSTstStatusAll This attribute will be set to on(3) when there is at least one test in progress on a channel of the card, otherwise the value will be off(2).	column	Enumeration	`.1.3.6.1.4.1.164.3.1.3.1.1.1.9`