wrIpTransparentGateway
RAD-MIB ·
.1.3.6.1.4.1.164.4.2.2.1.1.15
Object
The gateway used for transparent IP.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.4.2.2.1.1.15- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- lanrangerLinkEntry
- Table
- lanrangerLinkTable
- Siblings
- 15
Syntax
RFC1155-SMIIpAddress
- Source
- RFC1155-SMIIpAddress
- Base type
OctetString
Values & Constraints
Enumerated Values
1 | notApplicable |
2 | close |
3 | open |
Type Constraints
range: 4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| lanrangerLinkIndex A unique value for each link, equal to the value of ifIndex.
The value for each link must remain constant at least
from one re-initialization of the network management agent to
… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.4.2.2.1.1.1 |
| lanrangerLinkLayer2Type The link layer 2 type indicates whether the link is Bridge
or Router and specifies the Router's type. | column | Enumeration | .1.3.6.1.4.1.164.4.2.2.1.1.10 |
| lanrangerLinkLayer3Type The link layer 3 type indicates the protocol type. | column | Enumeration | .1.3.6.1.4.1.164.4.2.2.1.1.11 |
| lanrangerBackupLink The backup link interface index located in the two LSB bytes.
If the link is FR type, the two MSB will contain a DLCi number.
For other link types the two MSB will equal to 0. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.4.2.2.1.1.12 |
| wrWanThrottle Throttle controls the baud rate of the WAN.
For example if we have a WAN rate of 2M but we want only 1/2 M as
the baud rate we set the Wan Throttle to 512k.
These … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.4.2.2.1.1.13 |
| wrIpTransparentMode This parameter shows whether the IP Transparent mode is enabled.
When this mode is enabled, all frames (including broadcast and multicast frames)
are forwarded from E1/T1 to LAN a… | column | Enumeration | .1.3.6.1.4.1.164.4.2.2.1.1.14 |
| lanrangerLinkProtocolType This parameter indicates the routing protocol running on this Interface. | column | Enumeration | .1.3.6.1.4.1.164.4.2.2.1.1.16 |
| lanrangerLinkType The link type . | column | Enumeration | .1.3.6.1.4.1.164.4.2.2.1.1.2 |
| lanrangerLinkState The link is disabled, enabled or backup. | column | Enumeration | .1.3.6.1.4.1.164.4.2.2.1.1.3 |
| lanrangerLinkDTRMode The link DTR mode. | column | Enumeration | .1.3.6.1.4.1.164.4.2.2.1.1.4 |
| lanrangerLinkStatus The link physical status . | column | Enumeration | .1.3.6.1.4.1.164.4.2.2.1.1.5 |
| lanrangerLinkConnectionStatus The link connection status. | column | Enumeration | .1.3.6.1.4.1.164.4.2.2.1.1.6 |
| lanrangerLinkNumOfLogLinks The number of logical links on this physical link.
0 = noLogicalLink | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.4.2.2.1.1.7 |
| lanrangerLinkReset Setting this attribute to ON will reset the link . Upon completion the value will be set to OFF | column | Enumeration | .1.3.6.1.4.1.164.4.2.2.1.1.8 |
| lanrangerLinkRxMaskedFrames The number of masked frames received on this physical link. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.4.2.2.1.1.9 |