adslStatusSNRCompensation
RAD-MIB ·
.1.3.6.1.4.1.164.3.1.6.10.2.1.6
Object
This parameter indicates the target-SNR Firmware currently used.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.1.6.10.2.1.6- Type
- column
- Access
- readonly
- Status
- current
- Units
- dB
- Parent
- adslStatusEntry
- Table
- adslStatusTable
- Siblings
- 6
Syntax
dB SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| adslStatusBitRxRate This parameter indicates actual Receive (Downstream)
rate on this channel. | column | bps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.3.1.6.10.2.1.1 |
| adslStatusSelectedStandard This parameter indicates actual Standard
(transsmission mode) chosen after syncronization. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.10.2.1.2 |
| adslStatusOperationalState This parameter indicates syncronization status. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.10.2.1.3 |
| adslStatusBitErrorRate This parameter indicates the ratio between the number
of erroneous bits to the total bits number.
The value is normalized to 10e-8.
e.g. BER = 10 means BER = 10*10e-8 = 10e-7 | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.10.2.1.4 |
| adslStatusSNRCompensationMode This parameter indicates whether special SNR compensation mode
has been activated or not. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.10.2.1.5 |
| adslStatusSNRCorrection This parameter indicates whether the ADSL chip is operating
according to standard ADSL coding gain (auto) or
some other automatic SW configuration (respective to line attenuation… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.10.2.1.7 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| voiceIfCadenceCnfgIdx This object indicates the Idx of the
Agent Cnfg the following objects refer to.
255=Temporary Cnfg (when relevant,
Set is done only to this configuration).
For Agents that sup… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.13.1.1.1 |
| voiceIfCadencePortIdx Voice Port Index. May equal to the value of ifIndex. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.13.1.1.2 |
| voiceIfCadenceIdx Cadence (ringing type) index. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.13.1.1.3 |
| voiceIfCadencePeriodIdx Periods index (pair number) in a ringing cycle Cadence.
This index must be sequential, start from 1. Its maximum
value is the number of pairs of certain ringing type.
… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.13.1.1.4 |