mplsEgressTunnelIndex
RAD-MIB ·
.1.3.6.1.4.1.164.10.1.8.1.1
Object
column
MPLS-TC-STD-MIBMplsTunnelIndex
Egress Tunnel index .
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.10.1.8.1.1- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- mplsEgressTunnelEntry
- Table
- mplsEgressTunnelTable
- Siblings
- 16
Syntax
MPLS-TC-STD-MIBMplsTunnelIndex
- Source
- MPLS-TC-STD-MIBMplsTunnelIndex
- Base type
Unsigned32
Values & Constraints
Enumerated Values
1 | notApplicable |
2 | disable |
3 | enable |
Type Constraints
range: 0..65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mplsEgressTunnelOuterLabel The Label that is 'closer' to the network encapsulation. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.10.1.8.1.10 |
| mplsEgressTunnelInnerLabel The Label that is 'closer' to the user payload. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.10.1.8.1.11 |
| mplsEgressTunnelRowStatus Object used for creating, modifying, and deleting
a row of this table | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.164.10.1.8.1.12 |
| mplsEgressTunnelPWCounter The number of Pseudo Wires that use the egress tunnel. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.10.1.8.1.13 |
| mplsEgressTunnelPeerIdx Represents the Index of the Peer (as it is defined in the Peer Table),
for which this egress tunnel should be established. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.10.1.8.1.14 |
| mplsEgressTunnelExpBitsMode Indicates the EXP Bits Mode of this egress tunnel:
copyFromPw(2)- EXP Bits of this tunnel are copied from the EXP bits
of the PW, as configured for the PW.
… | column | Enumeration | .1.3.6.1.4.1.164.10.1.8.1.15 |
| mplsEgressTunnelExpBits Indicates the EXP Bits of this egress tunnel.
Relevant only when EXP Bits Mode is 'static(3)'. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.10.1.8.1.16 |
| mplsEgressTunnelOperStatus Indicates the operational status of this egress tunnel. | column | Enumeration | .1.3.6.1.4.1.164.10.1.8.1.17 |
| mplsEgressTunnelName The name assigned to the egress tunnel. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.164.10.1.8.1.2 |
| mplsEgressTunnelOwner Denotes the entity (or protocol) that created and is responsible
for managing this tunnel. | column | MPLS-TC-STD-MIBMplsOwner | .1.3.6.1.4.1.164.10.1.8.1.3 |
| mplsEgressTunnelAttachedInterface The outgoing interface leads
to a predefined ifindex based on connection type. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.164.10.1.8.1.4 |
| mplsEgressTunnelNextHopType Indicates address type of the Next Hop.
Not applicable for device with router. | column | Enumeration | .1.3.6.1.4.1.164.10.1.8.1.5 |
| mplsEgressTunnelNextHop Not applicable (=0) when mplsEgressTunnelNextHopType=notApplicable.
When applicable, represents ATM VC, Bridge Port,
according to mplsEgressTunnelNextHopType. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.10.1.8.1.6 |
| mplsEgressTunnelIpNextHop Applicable only when mplsEgressTunnelNextHopType =ipV4. | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.164.10.1.8.1.7 |
| mplsEgressTunnelNumberOfLabels Number of Tunnel Labels that should be transmitted
on this egress LSP (Labeled-Switched Path).
This number of labels does not include the PW number.
Valid values 0 - no label, 1,… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.10.1.8.1.8 |
| mplsEgressTunnelAdminStatus Indicates the desired operational status of this
egress tunnel. | column | Enumeration | .1.3.6.1.4.1.164.10.1.8.1.9 |