pktSwchChannelOptionsA

RAD-MIB · .1.3.6.1.4.1.164.8.2.2.2.1.16
MIB view Table view

Object

column SNMPv2-SMIInteger32 
This controls the use of general non-correlated channel options.  The value is a sum of values
(powers of two), where each value in the sum represents an option.
The values that may be included in the sum and their meanings are:
0   No options
1   RTS line checked
2   Auto call after clear
4   Auto call after <CR>
8 DCD is ON, only in DATA TRANSFER mode.
16  Charging Info Facility
32  Auto call if HW signal is set
              64  Accept calls even  if HW signal is  is OFF
             128 A transparent channel.

Context

MIB
RAD-MIB
OID
.1.3.6.1.4.1.164.8.2.2.2.1.16
Type
column
Access
readonly
Status
current
Parent
pktSwchChannelAEntry
Table
pktSwchChannelATable
Siblings
15

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Object Constraints
range: 0-31
Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
pktSwchChannelIfIndexA
This is used as the index for the channel table.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.164.8.2.2.2.1.1
pktSwchChannelAutocallIntervalA
The interval in seconds between consecutive autocall retries.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.164.8.2.2.2.1.10
pktSwchChannelCallAliasA
The alias to be sent after the call is set up. A value of zero indicates that alias sending is disabled. The aliases are configured on the Alias Table.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.164.8.2.2.2.1.11
pktSwchChannelSubAddress1A
The first subaddress for the channel.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.164.8.2.2.2.1.12
pktSwchChannelSubAddress2A
The second subaddress for the channel.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.164.8.2.2.2.1.13
pktSwchChannelNUIAEntry
The number corresponding to the NUI information to be sent. This number is the same as the pktSwchNuiIndex.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.164.8.2.2.2.1.14
pktSwchChannelClearTimerA
Time limitation for an open session. A value of zero indicates that the Clear timer is not used.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.164.8.2.2.2.1.15
pktSwchChannelNumberA
The number by which a channel is identified.
columnInteger32.1.3.6.1.4.1.164.8.2.2.2.1.2
pktSwchChannelProfileA
The profile that the channel uses for command mode operations.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.164.8.2.2.2.1.3
pktSwchChannelOutCallProfileA
The number of the profile that is used during an outgoing call on the channel.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.164.8.2.2.2.1.4
pktSwchChannelInCallProfileA
The number of the profile that is used during an incoming call on the channel.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.164.8.2.2.2.1.5
pktSwchChannelRemoteProfileA
The number of the profile that is downloaded to the remote PAD at the beginning of a new call.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.164.8.2.2.2.1.6
pktSwchChannelAutocallIdA
Selects the mnemonic (call ID) to be used as the first alternative. A value of zero indicates that the autocall function is disabled.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.164.8.2.2.2.1.7
pktSwchChannelAlterAutocallIdA
Selects the alternate mnemonic for the autocall function. A value of zero indicates that the alternate destination is not used.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.164.8.2.2.2.1.8
pktSwchChannelAutocallRetriesA
The number of autocall retrues if the autocall setup request is rejected with a busy cause.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.164.8.2.2.2.1.9