modemUserName
RAD-MIB ·
.1.3.6.1.4.1.164.3.4.3.1.1.1.34
Object
This object allows the user to configure a name for the selected modem.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.4.3.1.1.1.34- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- modemParamEntry
- Table
- modemParamTable
- Siblings
- 35
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| modemIdx For LRS:
A unique number to identify a modem in the Hub or its
far-end modem.
For DXC:
This will be the ifIndex of the External Port of D8SL card,
that works with this modem/prod… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.4.3.1.1.1.1 |
| modemHubId 4 Hex characters, identifying the Hub. The last two
characters (least significant) will be displayed on the
Hub's CL card by a 7 segment display.
This object is applicable only … | column | OctetString | .1.3.6.1.4.1.164.3.4.3.1.1.1.10 |
| modemIpAddress For LRS:
The IP address of the LRS-12 agent . If the modem is NOT
an LRS-12 card, the variable will be 0.0.0.0.
For DXC and MP: the IP Address of the Far-End unit. | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.164.3.4.3.1.1.1.11 |
| modemPsType The type of PS, for a stand-alone modem.
notApplicable - for LRS-12 or Rack 214 card. | column | Enumeration | .1.3.6.1.4.1.164.3.4.3.1.1.1.12 |
| modemMaskTraps The value determines the modem traps the agent should mask
and not send to the management console.
The value is a sum of 2**n, where n is a bit assigned to a
certain trap. For … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.4.3.1.1.1.13 |
| modemActiveAlarms Status of the Alarms for each modem. Each bit represents an
alarm. For bit location of each Alarm in the Octet String
see modem's specification.
A bit is '1' if the alarm is… | column | OctetString | .1.3.6.1.4.1.164.3.4.3.1.1.1.14 |
| modemAlrClear Setting this attribute to on, clears all the active (On)
alarms of the modem. Upon completion, the value will
automatically change to off(2). | column | Enumeration | .1.3.6.1.4.1.164.3.4.3.1.1.1.15 |
| modemAlrBufClear Setting this attribute to on, clears all the alarms in the
buffer alarm of the modem. Upon completion, the value will
automatically change to off(2). | column | Enumeration | .1.3.6.1.4.1.164.3.4.3.1.1.1.16 |
| modemMaskSignaling Mask of Signals per modem. When a signal is masked,
the agent will not send the modemSignalingChange TRAP, upon
change of this signal's value and it will not enter
the History… | column | OctetString | .1.3.6.1.4.1.164.3.4.3.1.1.1.17 |
| modemPanelType The panel type of the modem.
This parameter is applicable only for Far-End modems that
are stand-alone or cards of another LRS-12. It enables
displaying the correct panel of the… | column | Enumeration | .1.3.6.1.4.1.164.3.4.3.1.1.1.18 |
| modemIType Is the modem Intelligent (ASMi-xx) ; or not - (ASM-xx).
This object is used only for the Far-End modem (with the
relevant modemIdx).
notApplicable - for ASMi-32, ASMi-50
no - mo… | column | Enumeration | .1.3.6.1.4.1.164.3.4.3.1.1.1.19 |
| modemType Modem type.
xxxxxx - Stand-Alone modem.
xxxxxxc - Modem on a Card within a Hub having an Agent.
xxxxxxr - Modem on a Card within a Hub having no Agent.
xxxxxxcd - Modem on a Doub… | column | Enumeration | .1.3.6.1.4.1.164.3.4.3.1.1.1.2 |
| modemRcvPower The Rx Level of the modem, in dBm.
Valid values: -99 .. 0.
255=not applicable. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.4.3.1.1.1.20 |
| modemSwVersion SW version of the modem, multiplied by 100.
Example: 115 means SW ver: 1.15
0 = notApplicable. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.4.3.1.1.1.21 |
| modemLed LEDs status on the card . Each led will be represented by 4
bits where the first 2 bits (left) will specify the Status :
(00=NA, 01=OFF, 10=ON, 11=BLINK),
and the next two bits … | column | OctetString | .1.3.6.1.4.1.164.3.4.3.1.1.1.22 |
| modemRemoteType Remote modem card type. Not applicable to near - end modems.
For LRS-52, sa(3)=saMaster. | column | Enumeration | .1.3.6.1.4.1.164.3.4.3.1.1.1.23 |
| modemConfigPhantom Enables to supply electric power to remote devices (SA modem,
repeaters), through the current module.
off - remote devices will not get PS through the current modem.
on - remot… | column | Enumeration | .1.3.6.1.4.1.164.3.4.3.1.1.1.24 |
| modemRemoteTestEnable This parameter identifies if the remote Modem allowed to operates
tests.
For Near-End modems this parameter will be ON. | column | Enumeration | .1.3.6.1.4.1.164.3.4.3.1.1.1.25 |
| modemSwVerString Display String of the modem SW version.
Format: X. Y Z P
0..9 0..99 A,B,E 0..99
(Z+P are optional.)
A=alpha, B=beta, E=end of development.
Ex… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.164.3.4.3.1.1.1.26 |
| modemRemoteIdx 0 = notApplicable.
For LRS:
The Remote modem index.
Applicable only for modemRemoteType=double(5) or quad(7).
For DXC, LRS-52 and MP:
- if Remote unit is an LRS Quad card:… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.4.3.1.1.1.27 |
| modemHwVerString Display String of the modem HW version. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.164.3.4.3.1.1.1.28 |
| modemResetStatistics In the on state all statistics counters (including E1
counters) are zeroed. Upon completion, the value will
automatically change to off(2).
notApplicable - for modems with no s… | column | Enumeration | .1.3.6.1.4.1.164.3.4.3.1.1.1.29 |
| modemConfigMode The mode identifies if the Modem operates as the Master
unit or as the Slave unit.
For modems having a jumper for this function, this object
will be RO.
This object can be … | column | Enumeration | .1.3.6.1.4.1.164.3.4.3.1.1.1.3 |
| modemMaxRate Maximum rate supported by the modem | column | Enumeration | .1.3.6.1.4.1.164.3.4.3.1.1.1.30 |
| modemBoxMaterial Shape (picture) of modem box is related to box material.
Applicable for ASMi52 SA | column | Enumeration | .1.3.6.1.4.1.164.3.4.3.1.1.1.31 |
| modemLowSpeed This parameter enables working at low rates,
when working with a serial interface (V.35,X.21) modem
opposite to a E1/T1 interface modem. | column | Enumeration | .1.3.6.1.4.1.164.3.4.3.1.1.1.32 |
| modemDevicePorts The value indicates the existence of optional ports (which are not Line or DTE).
The value is a sum of 2**n, where n is a bit assigned to a
certain port. For bit assignment see … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.4.3.1.1.1.33 |
| modemRowValidity This parameter defines whether this row is valid or not.
It is an optional parameter. | column | Enumeration | .1.3.6.1.4.1.164.3.4.3.1.1.1.35 |
| modemTftpCmd This parameter defines the TFTP Command.
After performing the command, the Agent will automatically set
this variable to noOp(1). | column | Enumeration | .1.3.6.1.4.1.164.3.4.3.1.1.1.36 |
| modemModeTemporary This object specifies if the Modem operates as
modemConfigMode value (Master/Slave) temporarily or
permanently.
This object can be Set only when:
- modemConfigMode=maste… | column | Enumeration | .1.3.6.1.4.1.164.3.4.3.1.1.1.4 |
| modemNoOfDte Number of DTE ports in the modem. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.4.3.1.1.1.5 |
| modemWire Modem wiring. | column | Enumeration | .1.3.6.1.4.1.164.3.4.3.1.1.1.6 |
| modemMngLink Communication status between the pair of modems. | column | Enumeration | .1.3.6.1.4.1.164.3.4.3.1.1.1.7 |
| modemReset When this object is set to the value of hwReset(3),
the module performs HW Reset.
When this object is set to the value of configReset(4),
the modem performs Configuration Res… | column | Enumeration | .1.3.6.1.4.1.164.3.4.3.1.1.1.8 |
| modemSlot A unique number to identify the slot position of the
modem (card)in its Hub.
notApplicable - for a stand-alone modem or Rack 214
card.
io13..io15 - are for DXC u… | column | Enumeration | .1.3.6.1.4.1.164.3.4.3.1.1.1.9 |