agnDlciTxBe

RAD-MIB · .1.3.6.1.4.1.164.3.1.2.8.1.1.9

MIB view Table view

Object

column r/w Enumeration

This attribute indicates a unique Tx excess bandwidth on the
user transmit line or at the port receive line.

Context

MIB: RAD-MIB
OID: .1.3.6.1.4.1.164.3.1.2.8.1.1.9
Type: column
Access: readwrite
Status: current
Parent: agnDlciEntry
Table: agnDlciTable
Siblings: 16

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	notApplicable
`2`	aBit1
`3`	aBit0
`4`	bBit1
`5`	bBit0
`6`	cBit1
`7`	cBit0
`8`	dBit1
`9`	dBit0

Related Objects

Sibling Objects

Object	Type	Syntax	OID
agnDlciCnfgIdx This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.	column	Integer32	`.1.3.6.1.4.1.164.3.1.2.8.1.1.1`
agnDlciRxBc This attribute indicates a unique Rx committed bandwidth on the user receive line or at the port transmit line.	column	Enumeration	`.1.3.6.1.4.1.164.3.1.2.8.1.1.10`
agnDlciRxBe This attribute indicates a unique Rx excess bandwidth on the user receive line or at the port transmit line.	column	Enumeration	`.1.3.6.1.4.1.164.3.1.2.8.1.1.11`
agnDlciPriority This attribute indicates a unique priority of the pcv. 1 is the lowest priority and 7 is the highest priority.	column	Integer32	`.1.3.6.1.4.1.164.3.1.2.8.1.1.12`
agnDlciStatus This attribute indicates the status of the pvc. The status is disconnected(1) when one of the sides is programmed as not connected	column	Enumeration	`.1.3.6.1.4.1.164.3.1.2.8.1.1.13`
agnDlciSpoofing This object refers to sending of RIP messages: - yes : RIP messages will be sent ONLY if there is a change in the Net. - no : RIP messages will be always sent. This objec…	column	Enumeration	`.1.3.6.1.4.1.164.3.1.2.8.1.1.14`
agnDlciFunnelEnable This object selects Funnel activation: - disabled: Funnel operation will be disabled. The agnDlciTxBe and agnDlciTxBc values are not used for funnel…	column	Enumeration	`.1.3.6.1.4.1.164.3.1.2.8.1.1.15`
agnDlciRoutingProtocol This object is relevant only when one side of the DLCI is a CL-NMS interface. It defines which Routing Protocol will be used for management via CL-NMS port. notApplicable will be …	column	Enumeration	`.1.3.6.1.4.1.164.3.1.2.8.1.1.16`
agnDlciRowStatus This attribute allows to create/delete a row in this table. For creating a row, the NMS should set agnRowStatus.255.id2.id3.id4.id5.id6.id7 = active(1). For destroying a row, …	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.164.3.1.2.8.1.1.17`
agnDlciLSltIdx This attribute indicates a unique slot position where the card is inserted. This is the Source Slot of the DLCI. vs=Voice Switching In the ?004 Unit the entries io6(10)..io1…	column	Enumeration	`.1.3.6.1.4.1.164.3.1.2.8.1.1.2`
agnDlciLPrtIdx This attribute indicates a unique external or internal port number, including linkSelector or encapsulator. This is the Source Port of the DLCI. 100=noConnect (for voice swit…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.1.2.8.1.1.3`
agnDlciLIdx This attribute indicates a unique index for each possible used DLCI(16..991). This is the Source Side of the DLCI. 0=notApplicable (for voice switching) LIdx is defined according …	column	Integer32	`.1.3.6.1.4.1.164.3.1.2.8.1.1.4`
agnDlciHSltIdx This attribute indicates a unique slot position In the Mux where the DLCI is routed to - Destination Slot. For ISDN BRI ports of MX300/30 units: io1(5) = isdn1(5) and io2(6) =…	column	Enumeration	`.1.3.6.1.4.1.164.3.1.2.8.1.1.5`
agnDlciHPrtIdx This attribute indicates a unique port number where the DLCI is routed to - Destination Port.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.1.2.8.1.1.6`
agnDlciHIdx This attribute indicates a unique internal connection DLCI number where the Source DLCI is routed to - the Destination Side of the DLCI.	column	Integer32	`.1.3.6.1.4.1.164.3.1.2.8.1.1.7`
agnDlciTxBc This attribute indicates a unique Tx committed bandwidth on the user transmit line or at the port receive line.	column	Enumeration	`.1.3.6.1.4.1.164.3.1.2.8.1.1.8`