pktSwchLapbInternalClockA
RAD-MIB ·
.1.3.6.1.4.1.164.8.4.1.2.1.2
Object
column
Enumeration
The internal clock speed currently used on this LAPB link. If external clock is used, the value is 255.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.8.4.1.2.1.2- Type
- column
- Access
- readonly
- Status
- current
- Parent
- pktSwchLapbAEntry
- Table
- pktSwchLapbATable
- Siblings
- 17
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pktSwchLapbLinkNumberA The link number with which this entry is associated. This value corresponds to
pktSwchPhyInterfaceNumber. There is an entry for each link for which the pktSwchPhyInterfaceProtoc… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.4.1.2.1.1 |
| pktSwchLapbNSError The number of I frames transmitted out of sequence. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.8.4.1.2.1.10 |
| pktSwchLapbTransmittedRRFrames The transmitted RR frames on this link. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.8.4.1.2.1.11 |
| pktSwchLapbReceivedRRFrames The received RR frames on this link. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.8.4.1.2.1.12 |
| pktSwchLapbTransmittedRNRFrames The transmitted RNR frames on this link. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.8.4.1.2.1.13 |
| pktSwchLapbReceivedRNRFrames The received RNR frames on this link. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.8.4.1.2.1.14 |
| pktSwchLapbTransmittedFRMRFrames The transmitted FRMR frames on this link. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.8.4.1.2.1.15 |
| pktSwchLapbReceivedFRMRFrames The received FRMR frames on this link. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.8.4.1.2.1.16 |
| pktSwchLapbAckCounterA This object defines how many frames will be received on the link
before the PS will send Acknowledge (RR frame).
It is used for Piggy Back Acknowledge (ack within the info frames)… | column | Integer32 | .1.3.6.1.4.1.164.8.4.1.2.1.17 |
| pktSwchLapbAckTimerA The Ack Timer defines the maximum time in seconds that the device
will wait before sending RR acknowledgment on the received frames.
It is used for Piggy Back Acknowledge (ack wit… | column | Integer32 | .1.3.6.1.4.1.164.8.4.1.2.1.18 |
| pktSwchLapbLineOptionA The line option currently used on this link. A value of zero
indicates no options. A value between 1 and 255 inclusive specifes
a time in minutes after which the line will be di… | column | Integer32 | .1.3.6.1.4.1.164.8.4.1.2.1.3 |
| pktSwchLapbSegmentSizeA The current value of the segment size. | column | Integer32 | .1.3.6.1.4.1.164.8.4.1.2.1.4 |
| pktSwchLapbLineProtocol This is the lower level protocol which runs under this lapb interface. | column | Enumeration | .1.3.6.1.4.1.164.8.4.1.2.1.5 |
| pktSwchLapbLowerId In case of X.25 over Frame-relay this is the lower level link
number. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.4.1.2.1.6 |
| pktSwchLapbXIDA When this parameter is different than zero, this lapb is configured
as a V25 bis dialed link. This is the XID entry which this dialed link is
associated with. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.4.1.2.1.7 |
| pktSwchLapbTransmittedIFrames The transmitted I frames on this link. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.8.4.1.2.1.8 |
| pktSwchLapbReceivedIFrames The received I frames on this link. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.8.4.1.2.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| pktSwchLogChAssIndex The ifIndex value for the X.25 Interface. | column | RFC1381-MIBIfIndexType | .1.3.6.1.4.1.164.8.4.5.1.1.1 |