radMepOamMode
RAD-MIB ·
.1.3.6.1.4.1.164.3.1.6.1.3.1.1.7
Object
column
r/w
Enumeration
This object determines the OAM mode of the MEP: disabled - no CC is initiated nor responded initiate - the device initiates and responds to CC react - the device does not initiate a CC, but responds to CC.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.1.6.1.3.1.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- radMepEntry
- Table
- radMepTable
- Siblings
- 32
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| radOamIdx1 This object may indicate the Bridge Index or Configuration index. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.1 |
| radMepOamDestAddrType This object determines if the OAM messages are sent to user defined
unicast address, or to RAD proprietary multicast address. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.10 |
| radMepOamDestMacAddr This object determines the MAC address that OAM packets are sent to. | column | MacAddress | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.11 |
| radMepDefaultPriority This object defines the priority of the OAM messages sent when no
service is defined on EVC. If a service is defined, the OAM messages
will get the highest service priority exist… | column | Unsigned32 | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.12 |
| radMepCcStatus This object indicates the Continuity Check (CC)
status. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.13 |
| radMepOamProtocol Determines whether to use proprietary OAM mechanism,
or to use the standard (IEEE 802.1ag, ITU-T Y.1731). | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.14 |
| radMepMdId The index of the Maintenance Domain in the radMdTable (radMdIndex). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.15 |
| radMepMaFormat The type (and thereby format) of the Maintenance Association
Name. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.16 |
| radMepMaName The Short Maintenance Association name. | column | OctetString | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.17 |
| radMepSpVlanId The SP (Service Provider) VLAN used when sending an OAM message. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.18 |
| radMepCcInterval Indicates the interval at which CCMs are sent by a MEP
Valid only if radMepOamMode = initiate(4). | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.19 |
| radOamEvcIdx This object indicates the Index of the EVC (Ethernet Virtual Circuit)
that the MEP is associated to. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.2 |
| radMepTransmitLbmDestMacAddress The Target MAC Address Field to be transmitted in the Loopback Message:
For unicast MAC Address this is the unicast destination MAC address.
For multicast MAC Address, this varia… | column | MacAddress | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.20 |
| radMepTransmitLbmDestMepId The MEPID of another MEP in the same MA to which the
LBM is to be sent. This address will be used if the value of
radMepTransmitLbmDestIsMepId is yes (3).
802.1ag clause 12.14.7.3… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.21 |
| radMepTransmitLbmDestIsMepId yes (3) indicates that MEPID of the target MEP is used for loopback transmission.
no (2) indicates that unicast destination MAC address of the target MEP is used.
802.1ag clause 1… | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.22 |
| radMepTransmitLbmMassages The number of Loopback messages to be transmitted. | column | Integer32 | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.23 |
| radMepTransmitLbmVlanPriority The priority to be used in the VLAN tag, if present,
in the transmitted frame.
The default value is CCM priority.
802.1ag clause 12.14.7.3.2:e | column | Unsigned32 | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.24 |
| radMepTransmitLbmVlanDropEnable Drop Enable bit to be used in the VLAN tag, if present,
in the transmitted frame.
802.1ag clause 12.14.7.3.2:e | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.25 |
| radMepLbrIn Total number of valid, in-order Loopback Replies received. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.26 |
| radMepLbrInOutOfOrder The total number of valid, out-of-order Loopback Replies
received. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.27 |
| radMepLbmOut Total number of Loopback Messages transmitted. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.28 |
| radMepTransmitLtmTargetMacAddress The Target MAC Address Field to be transmitted in the Link Trace Message:
A unicast destination MAC address.
This address will be used
if the value of radMepTransmitLtmTarget… | column | MacAddress | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.29 |
| radMepIdx This object indicates the ID of the MEP being accessed. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.3 |
| radMepTransmitLtmTargetMepId The MEPID of another MEP in the same MA to which
LTM is to be transmitted. This address will be used
if the value of radMepTransmitLtmTargetIsMepId is yes (3).
802.1ag clause 12… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.30 |
| radMepTransmitLtmTargetIsMepId yes (3) indicates that MEPID of the target MEP is used for Linktrace transmission.
no (2) indicates that unicast destination MAC address of the target MEP is used.
802.1ag clause … | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.31 |
| radMepTransmitLtmTtl The LTM TTL field. Default value, if not specified, is 64.
The TTL field indicates the number of hops remaining to the LTM.
Decremented by 1 each Linktrace Responder that handles … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.32 |
| radMepTransmitLtmActivationCmd Activation command for starting Loop Trace. Set will be always
to 'on' value. After operation was finished, Agent will turn the value to 'off'. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.33 |
| radMepRowStatus This attribute allows to create/delete a row in this table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.4 |
| radMepLocalMepId This object indicates the local MEP ID. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.5 |
| radMepRemoteMepId This atribute is currently implemneted at radMepCcTable, that
supports multicast. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.6 |
| radMepContinuityVerMode This object determines the OAM behavior of the MEP:
disabled - no CC is done
cc_based - CC is done based on incoming messages
lb_based - CC is done based on loopback messages. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.8 |
| radMepMeLevel At any point in a network, ME Level is used to distinguish between OAM
signals belonging to different nested MEs.
Maintenance Entity Levels are defined as follows:
0,1,2 are assi… | column | Unsigned32 | .1.3.6.1.4.1.164.3.1.6.1.3.1.1.9 |