pktSwchChannelSubAddress2A
RAD-MIB ·
.1.3.6.1.4.1.164.8.2.2.2.1.13
Object
column
SNMPv2-SMIInteger32
The second subaddress for the channel.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.8.2.2.2.1.13- Type
- column
- Access
- readonly
- Status
- current
- Parent
- pktSwchChannelAEntry
- Table
- pktSwchChannelATable
- Siblings
- 15
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Object Constraints
range: 0-255
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pktSwchChannelIfIndexA This is used as the index for the channel table. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.2.2.2.1.1 |
| pktSwchChannelAutocallIntervalA The interval in seconds between consecutive autocall retries. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.2.2.2.1.10 |
| pktSwchChannelCallAliasA The alias to be sent after the call is set up. A value of zero indicates that alias
sending is disabled. The aliases are configured on the Alias Table. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.2.2.2.1.11 |
| pktSwchChannelSubAddress1A The first subaddress for the channel. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.2.2.2.1.12 |
| pktSwchChannelNUIAEntry The number corresponding to the NUI information to be sent. This number is the same as the
pktSwchNuiIndex. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.2.2.2.1.14 |
| pktSwchChannelClearTimerA Time limitation for an open session. A value of zero indicates that the Clear timer is not used. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.2.2.2.1.15 |
| pktSwchChannelOptionsA This controls the use of general non-correlated channel options. The value is a sum of values
(powers of two), where each value in the sum represents an option.
The values that m… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.2.2.2.1.16 |
| pktSwchChannelNumberA The number by which a channel is identified. | column | Integer32 | .1.3.6.1.4.1.164.8.2.2.2.1.2 |
| pktSwchChannelProfileA The profile that the channel uses for command mode operations. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.2.2.2.1.3 |
| pktSwchChannelOutCallProfileA The number of the profile that is used during an outgoing call on the channel. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.2.2.2.1.4 |
| pktSwchChannelInCallProfileA The number of the profile that is used during an incoming call on the channel. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.2.2.2.1.5 |
| pktSwchChannelRemoteProfileA The number of the profile that is downloaded to the remote PAD at the beginning of
a new call. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.2.2.2.1.6 |
| pktSwchChannelAutocallIdA Selects the mnemonic (call ID) to be used as the first alternative. A value of zero indicates that
the autocall function is disabled. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.2.2.2.1.7 |
| pktSwchChannelAlterAutocallIdA Selects the alternate mnemonic for the autocall function. A value of zero indicates that the
alternate destination is not used. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.2.2.2.1.8 |
| pktSwchChannelAutocallRetriesA The number of autocall retrues if the autocall setup request is rejected with a busy cause. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.2.2.2.1.9 |