atmEtherCnfgAdminStatus
RAD-MIB ·
.1.3.6.1.4.1.164.12.4.3.4.2.1.7
Object
column
r/w
Enumeration
The requested state of the ATM to Ethernet connection.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.12.4.3.4.2.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- atmEtherCnfgEntry
- Table
- atmEtherCnfgTable
- Siblings
- 20
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| atmEtherCnfgCrossConnectIndex A unique value to identify this cross-connect. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.4.3.4.2.1.1 |
| atmEtherCnfgTrafficDescrIndex The value of this object identifies the row
in the atmTrafficDescrParamTable which
applies to the transmit direction of the VCL. | column | ATM-TC-MIBAtmTrafficDescrParamIndex | .1.3.6.1.4.1.164.12.4.3.4.2.1.10 |
| atmEtherCnfgEncapsulationMode deprecated This object define the encapsulation type requested
for the connection.
it indicates if we transfer the Ethernet frame to the
atm side without the Crc32- AtmBridgedEther,
or wi… | column | Enumeration | .1.3.6.1.4.1.164.12.4.3.4.2.1.11 |
| atmEtherCnfgPriority This object define the priority of connection.
The first parameter affects the transmition of cells in Conjested
network is the Service Category( Cbr has the highest priority and … | column | Enumeration | .1.3.6.1.4.1.164.12.4.3.4.2.1.12 |
| atmEtherCnfgRowStatus This object is used to create a new row or
modify or delete an existing row in this table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.164.12.4.3.4.2.1.13 |
| atmEtherCnfgRouterIP The interface IP address for SNMP requests. | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.164.12.4.3.4.2.1.14 |
| atmEtherCnfgRouterMask The interface IP address mask for SNMP requests. | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.164.12.4.3.4.2.1.15 |
| atmEtherCnfgRouterFragmentation Fragmentation. When application is not router value must be 'notApplicable'. | column | Enumeration | .1.3.6.1.4.1.164.12.4.3.4.2.1.16 |
| atmEtherCnfgRouterRIPMode RIP Mode. When application is not router value must be 'notApplicable'. | column | Enumeration | .1.3.6.1.4.1.164.12.4.3.4.2.1.17 |
| atmEtherCnfgRouterMTU deprecated . | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.4.3.4.2.1.18 |
| atmEtherCnfgPPPEncapsulation This object define the encapsulation type requested
for the connection.
rfc1483 - Multiprotocol Encapsulation over
ATM Adaptation Lay… | column | Enumeration | .1.3.6.1.4.1.164.12.4.3.4.2.1.19 |
| atmEtherCnfgAtmIfIndex The ifIndex associated to the ATM interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.4.3.4.2.1.2 |
| atmEtherCnfgAllocatedBuffers This object enables user to limit the amount of buffers
used by the connection.
The limit set by this object will give
the effect of a virtual buffer pool per connection.
… | column | Integer32 | .1.3.6.1.4.1.164.12.4.3.4.2.1.20 |
| atmEtherCnfgPauseTrigger Enable/Disable LAN Pause triger from WAN connection | column | Enumeration | .1.3.6.1.4.1.164.12.4.3.4.2.1.21 |
| atmEtherCnfgAtmVpi The Vpi number of the ATM end point. | column | Integer32 | .1.3.6.1.4.1.164.12.4.3.4.2.1.3 |
| atmEtherCnfgAtmVci The Vci number of the ATM end point. | column | Integer32 | .1.3.6.1.4.1.164.12.4.3.4.2.1.4 |
| atmEtherCnfgEtherIfIndex The ifIndex associated to the atm-Ethernet interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.4.3.4.2.1.5 |
| atmEtherCnfgMacAddr deprecated The DFA number of the Ethernet end point. | column | MacAddress | .1.3.6.1.4.1.164.12.4.3.4.2.1.6 |
| atmEtherCnfgOperStatus The real operational status of the ATM to Ethernet connection. | column | Enumeration | .1.3.6.1.4.1.164.12.4.3.4.2.1.8 |
| atmEtherCnfgLastChange The value of sysUpTime at the time the ATM to Ethernet
connection entered its current operational state.
If the current state was entered prior to the last
re-initialization of th… | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.164.12.4.3.4.2.1.9 |