pktSwchHdlcNrzModeA

RAD-MIB · .1.3.6.1.4.1.164.8.5.2.1.16
MIB view Table view

Object

column Integer32 
The data encoding format.
The value is a sum of values (powers of two), where each
value in the sum represents an option.
The values that may be included in the sum and their
meanings are:
		0   NRZ
		1   NRZI
		2   Transmit Idles between frames and control the RTS pin
		4   Normal Operation (DCD, CTS lines under automatic control)
		XX  Any combination of the values specified above.

Context

MIB
RAD-MIB
OID
.1.3.6.1.4.1.164.8.5.2.1.16
Type
column
Access
readonly
Status
current
Parent
pktSwchHdlcAEntry
Table
pktSwchHdlcATable
Siblings
22

Syntax

Integer32

Values & Constraints

Object Constraints
range: 1-10

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
pktSwchHdlcLinkNumberA
The link number with which this entry is associated. This value corresponds to pktSwchPhyInterfaceNumber. There is an entry for each link for which the pktSwchPhyInterfaceProtoc…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.164.8.5.2.1.1
pktSwchHdlcDestDlciA
The local DLCI which is used for HDLC encapsulation over Frame Relay.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.164.8.5.2.1.10
pktSwchHdlcDestPortA
The local port that is used for HDCL encapsulation over Frame Relay.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.164.8.5.2.1.11
pktSwchHdlcProtocolA
The HDLC protocol type.
columnEnumeration.1.3.6.1.4.1.164.8.5.2.1.12
pktSwchHdlcFlowContOptionsA
This specifies the type of flow control of the HDLC link. The value is a sum of values (powers of two), where each value in the sum represents an option. The values that may be …
columnInteger32.1.3.6.1.4.1.164.8.5.2.1.13
pktSwchHdlcBufferFlowControlA
The number of buffers that will be allocated for the HDLC link.
columnInteger32.1.3.6.1.4.1.164.8.5.2.1.14
pktSwchHdlcInternalClockA
The baud rate of the internal clock.
columnEnumeration.1.3.6.1.4.1.164.8.5.2.1.15
pktSwchHdlcConnStatus
The status of the Hdlc session.
columnEnumeration.1.3.6.1.4.1.164.8.5.2.1.17
pktSwchHdlcSpecialStatus
The status of the Hdlc link.
columnEnumeration.1.3.6.1.4.1.164.8.5.2.1.18
pktSwchHdlcCtsStatus
The CTS status.
columnEnumeration.1.3.6.1.4.1.164.8.5.2.1.19
pktSwchHdlcDestAddrA
The destination address. It defines the X.25 address on the remote device.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.164.8.5.2.1.2
pktSwchHdlcRunningX25Lcn
The format of the string is ifIndex:LCN
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.164.8.5.2.1.20
pktSwchHdlcRunningDlci
The format of the string is ifIndex:DLCI
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.164.8.5.2.1.21
pktSwchHdlcMaxBuffToNet
The maximum number of buffers above which Flow Control is enabled
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.164.8.5.2.1.22
pktSwchHdlcBuffToNet
The number of buffers waiting for transmission.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.164.8.5.2.1.23
pktSwchHdlcDestSubAddrA
The destination subaddress. It defines the synchronous link subaddress on the remote device.
columnInteger32.1.3.6.1.4.1.164.8.5.2.1.3
pktSwchHdlcRedialTimeoutA
The time interval in seconds between two consecutive connect operations retries.
columnInteger32.1.3.6.1.4.1.164.8.5.2.1.4
pktSwchHdlcRedialRetriesA
This defines how many times the call operation is repeated if the call request has failed.
columnInteger32.1.3.6.1.4.1.164.8.5.2.1.5
pktSwchHdlcInactivityA
The amount of time in minutes of inactivity that will cause the session to disconnect.
columnInteger32.1.3.6.1.4.1.164.8.5.2.1.6
pktSwchHdlcX25FacilitiesA
This specifies the X.25 facilities. The value is a sum of values (powers of two), where each value in the sum represents an option. The values that may be included in the sum an…
columnInteger32.1.3.6.1.4.1.164.8.5.2.1.7
pktSwchHdlcLocalSubaddr1A
The first local subaddress.
columnInteger32.1.3.6.1.4.1.164.8.5.2.1.8
pktSwchHdlcLocalSubaddr2A
The secondary local subaddress.
columnInteger32.1.3.6.1.4.1.164.8.5.2.1.9