atmCbrCnfgParity
RAD-MIB ·
.1.3.6.1.4.1.164.12.4.3.3.1.1.13
Object
column
r/w
Enumeration
Controls the use of pointer parity when using the STRUCTURED or STRUCTURED WITH POINTER connection type. as defined by atmCbrCnfgService. ON - Pointer parity bit generation at the transmit side, and checking of parity bit for error detection at the receiving side enabled. Supported only for STRUCTURED or STRUCTURED WITH POINTER service. OFF - Pointer parity generation and checking disabled. Supported only for STRUCTURED or STRUCTURED WITH POINTER service. N/A - Not applicable. This is the only option when selecting UNSTRUCTURED or STRUCTURED WITHOUT POINTER.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.12.4.3.3.1.1.13- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- atmCbrCnfgEntry
- Table
- atmCbrCnfgTable
- Siblings
- 14
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | link1 |
2 | link2 |
3 | link3 |
4 | link4 |
5 | internal |
6 | external |
7 | automatic |
8 | loopback |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| atmCbrCnfgAtmIfIndex The ifIndex associated to the ATM interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.4.3.3.1.1.1 |
| atmCbrCnfgRxBytesPerCell number of bytes to be receive in order per cell to low the delay. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.4.3.3.1.1.10 |
| atmCbrCnfgTxTimeSlots This value indicates the time-slots used by this connection for receiving.
It uses 32 bits for E1 and low 24 bits for T1.
each bit represents a time slot for receiving :
time-slot… | column | TimeSlots | .1.3.6.1.4.1.164.12.4.3.3.1.1.11 |
| atmCbrCnfgTxBytesPerCell number of bytes to be transmit in order per cell to low the delay. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.4.3.3.1.1.12 |
| atmCbrCnfgRowStatus This object is used to create a new row or
modify or delete an existing row in this table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.164.12.4.3.3.1.1.14 |
| atmCbrCnfgService Define if DSx service is structured or unstructured.
A structured(3) interface is some nx64Kbps. (n x DS0 = n Time Slots)
An unstructured (2) interface is full DSx, x >0.
(1.544… | column | Enumeration | .1.3.6.1.4.1.164.12.4.3.3.1.1.15 |
| atmCbrCnfgAtmVpi The Vpi number of the ATM end point. | column | Integer32 | .1.3.6.1.4.1.164.12.4.3.3.1.1.2 |
| atmCbrCnfgAtmVci The Vci number of the ATM end point. | column | Integer32 | .1.3.6.1.4.1.164.12.4.3.3.1.1.3 |
| atmCbrCnfgCbrIfIndex The ifIndex associated to the logical interface of DS0s bundle
or to ifIndex of one of the data ports. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.4.3.3.1.1.4 |
| atmCbrCnfgAdminStatus The requested status of the connection. | column | Enumeration | .1.3.6.1.4.1.164.12.4.3.3.1.1.5 |
| atmCbrCnfgOperStatus The real operational status of the connection. | column | Enumeration | .1.3.6.1.4.1.164.12.4.3.3.1.1.6 |
| atmCbrCnfgLastChange The value of sysUpTime at the time the ATM to CBR
connection entered its mandatory operational state.
If the mandatory state was entered prior to the last
re-initialization of the… | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.164.12.4.3.3.1.1.7 |
| atmCbrCnfgAAL1Signalling Not in use. Must be always 'off'. | column | Enumeration | .1.3.6.1.4.1.164.12.4.3.3.1.1.8 |
| atmCbrCnfgRxTimeSlots This value indicates the time-slots used by this connection for receiving.
It uses 32 bits for E1 and low 24 bits for T1.
each bit represents a time slot for receiving :
time-slot… | column | TimeSlots | .1.3.6.1.4.1.164.12.4.3.3.1.1.9 |