mdlSInstCardType
RAD-MIB ·
.1.3.6.1.4.1.164.3.1.3.1.1.1.2
Object
column
Enumeration
This attribute indicates the type of card installed in the specific slot position. Only PS cards are possible in the PS slots. Only CL cards are possible in the CL slots. Only IO cards are possible in the IO slots.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.1.3.1.1.1.2- Type
- column
- Access
- readonly
- Status
- current
- Parent
- mdlSInstEntry
- Table
- mdlSInstTable
- Siblings
- 11
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mdlSInstSltIdx A unique number to identify a slot position in the mux.
In the ?004 Unit the entries PsB(2),ClB(4),io6(10)..io(16)
are not valid.
For the Vmux2100 Main Board clA (3) is used. | column | Enumeration | .1.3.6.1.4.1.164.3.1.3.1.1.1.1 |
| mdlSClearAlrCmd Setting this command to ON, enforces a clear of all the
alarms in the given slot, excluding alarms of port level.
The clear operation will not be applied for masked/inverted
alarm… | column | Enumeration | .1.3.6.1.4.1.164.3.1.3.1.1.1.10 |
| mdlSClearAllAlrCmd Setting this command to ON, enforces a clear of all the
alarms in the given slot, including all its ports alarms.
The clear operation will not be applied for masked/inverted
alar… | column | Enumeration | .1.3.6.1.4.1.164.3.1.3.1.1.1.11 |
| mdlSTemperature Temperature of the card, in Celsius degrees. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.3.1.1.1.12 |
| mdlSHwVersion This attribute indicates the Hardware version of the
installed card in the specific slot position. | column | OctetString | .1.3.6.1.4.1.164.3.1.3.1.1.1.3 |
| mdlSSwVersion This attribute indicates the Software version of the
installed card in the specific slot position. | column | OctetString | .1.3.6.1.4.1.164.3.1.3.1.1.1.4 |
| mdlSAlrStatus Indicates the alarm state at module level, i.e. lower level
(port alarms) status is not included.
This attribute will be set to:
critical(7) - when there is at least one active … | column | Enumeration | .1.3.6.1.4.1.164.3.1.3.1.1.1.5 |
| mdlSAlrStatusAll Indicates the alarm state in the module-all level, i.e. lower level
(port alarms) included.
This attribute will be set to:
critical(7) - when there is at least one active (state… | column | Enumeration | .1.3.6.1.4.1.164.3.1.3.1.1.1.6 |
| mdlSMaskedAlrStat Indicates the alarm state at module level, [i.e. lower level
(port alarms) status is not included],including Masked alarms.
This attribute will be set to:
critical(7) - when the… | column | Enumeration | .1.3.6.1.4.1.164.3.1.3.1.1.1.7 |
| mdlSMaskedAlrStatAll Indicates the alarm state in the module-all level, i.e. lower level
(port alarms) included, including Masked alarms.
This attribute will be set to:
critical(7) - when there is a… | column | Enumeration | .1.3.6.1.4.1.164.3.1.3.1.1.1.8 |
| mdlSTstStatusAll This attribute will be set to on(3) when there is at least
one test in progress on a channel of the card, otherwise
the value will be off(2). | column | Enumeration | .1.3.6.1.4.1.164.3.1.3.1.1.1.9 |