prtPhMlMfSyncSlot
RAD-MIB ·
.1.3.6.1.4.1.164.3.2.3.2.2.5.1.12
Object
column
r/w
Enumeration
This attribute indicates whether the sync is synchronized according to a certain card and the slot of this card. This operation is required in order to bypass signaling of PCM voice channels. In the ?004 Unit the entries io6(10)..io12(16) are not valid
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.2.3.2.2.5.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- prtPhMlCnfgEntry
- Table
- prtPhMlCnfgTable
- Siblings
- 17
Syntax
Enumeration
Values & Constraints
Object Constraints
range: 1-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtPhMlCnfgIdx This attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg. | column | Integer32 | .1.3.6.1.4.1.164.3.2.3.2.2.5.1.1 |
| prtPhMlSyncRestore Sync Restoration time, in seconds.
notApplicable=0. | column | Integer32 | .1.3.6.1.4.1.164.3.2.3.2.2.5.1.10 |
| prtPhMlBus The TDM BUS this port is linked to. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.5.1.11 |
| prtPhMlClockSource The Clock Source: TC (Tx Clock) or RC (Rx Clock) signals. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.5.1.13 |
| prtPhMlErrCorrection This object indicates if Error Correction mechanism should be applied or not.
It will be applicable only if the interface HW includes the Error Correction
chip. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.5.1.14 |
| prtPhMlCorrectionMode This object is applicable only when prtPhMlErrCorrection=yes.
random - enables to correct up to 3 random errors in an 23 bit frame
built from 12 data bits and 11 appended… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.5.1.15 |
| prtPhMlControlSignals This object shows whether the Port will ignore or implement the control signals
like DCD, CTS, DTR. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.5.1.16 |
| prtPhMlInterfaceType The SW Configurable Interface Type. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.5.1.17 |
| prtPhMlClockPolarity This object indicates the clock polarity. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.5.1.18 |
| prtPhMlSltIdx This attribute indicates a unique slot position where
the module is inserted.
In the ?004 Unit the entries io6(10)..io12(16) are not valid.
For the Vmux2100 Main … | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.5.1.2 |
| prtPhMlPrtIdx This attribute indicates a unique port number.
ML-20 cards have just one external interface. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.5.1.3 |
| prtPhMlConnect This attribute indicates whether the port should be considered
in any of the mux algorithms. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.5.1.4 |
| prtPhMlRate This attribute indicates the configured port speed.
auto - rate is adapted automatically to the attached modem rate. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.5.1.5 |
| prtPhMlCAS This attribute indicates whether Channel Associated
Signaling (CAS) is used. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.5.1.6 |
| prtPhMlClockMode Clock mode. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.5.1.7 |
| prtPhMlSatBuffer Satellite Buffer (+/- 256). | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.5.1.8 |
| prtPhMlDialProcess Dial Process. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.5.1.9 |