r2ClearBackDetect
RAD-MIB ·
.1.3.6.1.4.1.164.3.1.6.9.1.1.1.12
Object
Timer of the R2 incoming side. Minimum duration to recognize a valid clear-back, in [msec]. RW only when r2Mode=manual.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.1.6.9.1.1.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- r2CnfgEntry
- Table
- r2CnfgTable
- Siblings
- 24
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Enumerated Values
1 | off |
2 | restart |
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| r2CnfgIdx This attribute indicates the Idx of the Cnfg being accessed.
255 = TmpCnfg.
1 = Current Cnfg.
Write is allowed only to TmpCnfg. | column | Integer32 | .1.3.6.1.4.1.164.3.1.6.9.1.1.1.1 |
| r2SeizeDetect Seize Detect. Timer of the R2 incoming side.
Minimum duration to detect a valid seizure, in [msec].
RW only when r2Mode=manual. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.9.1.1.1.10 |
| r2SeizeAckDelay Timer of the R2 incoming side.
Delay before sending a valid seize ack signal, in [msec].
Applicable only when r2Mode=manual. only when r2Mode=manual. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.9.1.1.1.11 |
| r2ClearFwdDetect Timer of the R2 incoming side.
Minimum duration to recognize a valid clear-forward, in [msec].
RW only when r2Mode=manual. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.9.1.1.1.13 |
| r2FaultDetect Timer of the R2 incoming side.
Minimum duration to recognize a block signal, in [msec].
RW only when r2Mode=manual. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.9.1.1.1.14 |
| r2FaultRemoveDetect Timer of the R2 incoming side.
Minimum duration to recognize a valid block removal signal, in [msec].
RW only when r2Mode=manual. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.9.1.1.1.15 |
| r2MeterPulseDuration Timer of the R2 incoming side.
Duration of metering pulse to be sent, in [msec].
RW only when r2Mode=manual. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.9.1.1.1.16 |
| r2SeizeAckWait Timer of the R2 outgoing side.
Minimum duration to receive seizure acknowledge signal, in [msec].
RW only when r2Mode=manual. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.9.1.1.1.17 |
| r2SeizeAckDetect Timer of the R2 outgoing side.
Minimum duration to recognize a valid seizure acknowledge signal, in [msec].
RW only when r2Mode=manual. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.9.1.1.1.18 |
| r2AnswerDetect Timer of the R2 outgoing side.
Minimum duration to recognize a valid answer signal, in [msec].
RW only when r2Mode=manual. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.9.1.1.1.19 |
| r2CnfgProfileIdx Profile Index.
Valid values: 1..5
Only instances of profiles that are defined having agnSigProfType=r2Cas will
exist in this table. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.9.1.1.1.2 |
| r2BlockRemoveDetect Timer of the R2 outgoing side.
Minimum duration to recognize a valid block removal signal, in [msec].
RW only when r2Mode=manual. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.9.1.1.1.20 |
| r2MeterPulseDetect Timer of the R2 outgoing side.
Minimum duration of incoming meter pulse, in [msec].
RW only when r2Mode=manual. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.9.1.1.1.21 |
| r2ForcedDisconnect Timer of the R2 outgoing side.
Minimum duration to recognize disconnect signal, in [msec].
RW only when r2Mode=manual. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.9.1.1.1.22 |
| r2DisconnectAck Timer of the R2 outgoing side.
Minimum duration to recognize disconnect acknowledge signal, in [msec].
RW only when r2Mode=manual. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.9.1.1.1.23 |
| r2ReleaseGuardT1 Timer of the R2 outgoing side.
Minimum duration to release guard, in [msec].
During this time, no new call can be initiated.
RW only when r2Mode=manual. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.9.1.1.1.24 |
| r2CnfgRowStatus This object enables the user to add/delete entries to/from the table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.164.3.1.6.9.1.1.1.25 |
| r2Mode R2 Mode.
auto - in this mode, default value of timers will be used by R2,
according to the selected r2Country.
manual - in this mode, user can change the value of R2 ti… | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.9.1.1.1.3 |
| r2Country R2 Country. R2 Timers can have different range of values and
defaults for each country. When r2Mode=auto, the default value is
used by R2 according to this selected country.
1… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.9.1.1.1.4 |
| r2Delay This object enables user to configure the link as satellite or terrestrial.
The seize acknowledge detect timing is much shorter (msec) for
terrestrial link than for satellite link… | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.9.1.1.1.5 |
| r2MeteringInd Which Bit will be used for Metering Indication. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.9.1.1.1.6 |
| r2BreakMakeRatio This object describes the Break-Make Ratio of Pulse Duration, in [msec].
RW only when r2Mode=manual. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.9.1.1.1.7 |
| r2ReleaseGuardT2 Release Guard timing T2.
Release guard timing before going to idle, in [msec].
RW only when r2Mode=manual. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.9.1.1.1.8 |
| r2Regret Regret duration, in [sec].
RW only when r2Mode=manual. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.9.1.1.1.9 |