mdlRRConfigMsg
RAD-MIB ·
.1.3.6.1.4.1.164.1.2.3.1.1.9
Object
column
OctetString
Full configuration message coded in internal RAD application format. This entry describes module' configuration.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.1.2.3.1.1.9- Type
- column
- Access
- readonly
- Status
- current
- Parent
- mdlRREntry
- Table
- mdlRRTable
- Siblings
- 13
Syntax
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mdlRRid Unique number to identify the module. It indicates the slot
number the module is inserted in. | column | Integer32 | .1.3.6.1.4.1.164.1.2.3.1.1.1 |
| mdlRRMngState This entry indicates the setting of the module's switches. ENABLE means that the module
can accept management commands. | column | Enumeration | .1.3.6.1.4.1.164.1.2.3.1.1.10 |
| mdlRRType Indicates the type of the module installed in the specified slot number. | column | Enumeration | .1.3.6.1.4.1.164.1.2.3.1.1.11 |
| mdlRRHwVer ASCII string for description and display of the module's hardware version,
as it is known by the module's software. A manager can record his own
hardware upgrade. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.164.1.2.3.1.1.12 |
| mdlRRSwVer ASCII string for description and display of the module's
software version. A value of NOT APPLICABLE will be recorded
for a module having no independent processor. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.164.1.2.3.1.1.13 |
| mdlRRSpecific Object identifier of entity containing additional information
regarding this instance. This entry is module type specific. | column | ObjectIdentifier | .1.3.6.1.4.1.164.1.2.3.1.1.14 |
| mdlRRTLRstatus This entry specifies the status of the setup on the TL-2/Exx
modules. When the value is ON, lobe one is the only active lobe. This entry
will have the value UNKNOWN for all other… | column | Enumeration | .1.3.6.1.4.1.164.1.2.3.1.1.2 |
| mdlRRtermination Attribute describing the termination state as set by the switches on the
lobe modules | column | Enumeration | .1.3.6.1.4.1.164.1.2.3.1.1.3 |
| mdlRRReset When this object is set to the value of ON(3),
the module performs software reset. Upon completion, a trap will
be issued to the management station and the value
will be set to … | column | Enumeration | .1.3.6.1.4.1.164.1.2.3.1.1.4 |
| mdlRRLed This entry specifies the LEDs status in the module . Each led will be represented by 4 bits
where the first 2 bits will specify the status (NA, OFF, ON, BLINK), and the next two… | column | OctetString | .1.3.6.1.4.1.164.1.2.3.1.1.5 |
| mdlRRSpeed Attribute describing the bandwidth of the media as set by the module switches. | column | Enumeration | .1.3.6.1.4.1.164.1.2.3.1.1.6 |
| mdlRRMngAutoDis obsolete Attribute describing the setup of the MNG switch on the TL- Active cards. Value ON indicates
the ability of activating the auto-disable mechanism of the card via management comm… | column | Enumeration | .1.3.6.1.4.1.164.1.2.3.1.1.7 |
| mdlRRAutodisable This attribute can be set by the manager if the value of mdlRRMngAutoDis is ON. It
controls the behavior of the Active cards regarding the Auto-disable mechanism. All
ports wil… | column | Enumeration | .1.3.6.1.4.1.164.1.2.3.1.1.8 |