prtParamLoopDetectStatus
RAD-MIB ·
.1.3.6.1.4.1.164.6.2.15.5.1.1.29
Object
column
Enumeration
This object shows whether a loop was detected on the current port.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.6.2.15.5.1.1.29- Type
- column
- Access
- readonly
- Status
- current
- Parent
- prtParamEntry
- Table
- prtParamTable
- Siblings
- 27
Syntax
Enumeration
Values & Constraints
Enumerated Values
2 | internal |
3 | rxClk |
255 | notApplicable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtParamIdx This object is an index of the specific port or interface.
For a port, the index will be as agreed between agent and
application.
For an interface, ifIndex may be used.
… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.6.2.15.5.1.1.1 |
| prtParamLineLength Line Length of the line connected to this port. | column | Enumeration | .1.3.6.1.4.1.164.6.2.15.5.1.1.10 |
| prtParamUsage Defines whether this port works as User port or as Network port. | column | Enumeration | .1.3.6.1.4.1.164.6.2.15.5.1.1.11 |
| prtParamMappingMode This object defines path protection on SONET/SDH link
Auto - SONET/SDH mapping for port is copied
automatically to same TU on the redundant
SONET/SDH local (reside on same slot) … | column | Enumeration | .1.3.6.1.4.1.164.6.2.15.5.1.1.12 |
| prtParamAlarmIndication This object indicates status-aggregation of non-masked alarms
associated with all interface layers, related to this physical port.
When at least one non-masked alarm exists on an… | column | Enumeration | .1.3.6.1.4.1.164.6.2.15.5.1.1.13 |
| prtParamClkQualityLevel This parameter indicates quality level of clock signal.
Quality is encoded according to SSM
(Synchronization Status Messages) encoding.
Bits 8 -5 of byte are encoded as foll… | column | OctetString | .1.3.6.1.4.1.164.6.2.15.5.1.1.14 |
| prtParamClkWaveShape Wave shape of station clock source signal. | column | Enumeration | .1.3.6.1.4.1.164.6.2.15.5.1.1.15 |
| prtParamStatus Station clock source Status. | column | Enumeration | .1.3.6.1.4.1.164.6.2.15.5.1.1.16 |
| prtParamSignalLevel This object indicates signal level (in thenth of dB units)
on selected port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.6.2.15.5.1.1.17 |
| prtParamClkUserQualityLevel This parameter allows user to mark quality level of clock.
Quality is encoded according to SSM
(Synchronization Status Messages) encoding.
Bits 8 -5 of byte are encoded as follo… | column | OctetString | .1.3.6.1.4.1.164.6.2.15.5.1.1.18 |
| prtParamDataRate Rate of serial data port (V.11, V.24, V.35)
in kbps units. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.6.2.15.5.1.1.19 |
| prtControlCnfg This object may be used for port RW general parameter/s.
For detailed meaning, see product's spec.
Supported by: PRBi-E3/T3.
For ACE2002:
This parameter will includ… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.6.2.15.5.1.1.2 |
| prtParamLoopDetect Enable/disable Loop Detection on a port.
Examples of ports: physical, Channelized Bundle over TDM Uplink,
Bridge Ports. | column | Enumeration | .1.3.6.1.4.1.164.6.2.15.5.1.1.20 |
| prtParamActUponLoopDetect This parameter is used to indicate which actions
should be taken in case a loop is detected in the network the port is part of.
Each action is represented by a bit.
Currently defi… | column | OctetString | .1.3.6.1.4.1.164.6.2.15.5.1.1.21 |
| prtParamPSNLayer This object indicates the network layer from which clock is derived. | column | Enumeration | .1.3.6.1.4.1.164.6.2.15.5.1.1.22 |
| prtParamRxSsm This object indicates if Station Clock SSM messages
received will serve as criteria for clock selection. | column | Enumeration | .1.3.6.1.4.1.164.6.2.15.5.1.1.23 |
| prtParamClkSsmRxSource This object indicates the Sa-bit of the E1 frame,
in which SSM messages are carried. | column | Enumeration | .1.3.6.1.4.1.164.6.2.15.5.1.1.24 |
| prtParamFarEndDevice Programmed Far-End device connected to this port.
This object is relevant for products having multiple DBs.
It will enable configuring offline, the relevant data.
For MP-4100,… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.6.2.15.5.1.1.26 |
| prtParamTxClk enable/disable station clock signal output. | column | Enumeration | .1.3.6.1.4.1.164.6.2.15.5.1.1.27 |
| prtParamSdBerThreshold The Signal Degrade Bit Error Rate Threshold.
The negated value of this number is used as the exponent of
10 for computing the threshold value for the Bit Error Rate (BER).
For exa… | column | Unsigned32 | .1.3.6.1.4.1.164.6.2.15.5.1.1.28 |
| prtParamClkSrc The source of Transmit Clock.
'loopTiming' or 'loopback' indicates that the recovered receive clock
is used as the transmit clock.
'localTiming' or 'internal' ind… | column | Enumeration | .1.3.6.1.4.1.164.6.2.15.5.1.1.3 |
| prtParamPhantom Power feeding to another device. | column | Enumeration | .1.3.6.1.4.1.164.6.2.15.5.1.1.4 |
| prtParamResetStatsCmd Reset statistics of the selected port. | column | Enumeration | .1.3.6.1.4.1.164.6.2.15.5.1.1.5 |
| prtParamLastResetStatsTime The value of MIB II's sysUpTime object at the last time that
prtParamResetStatsCmd was Set to on(3) for this port.
If prtParamResetStatsCmd was never Set to on(3) since last
r… | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.164.6.2.15.5.1.1.6 |
| prtParamInterfaceType The type of the port. | column | Enumeration | .1.3.6.1.4.1.164.6.2.15.5.1.1.7 |
| prtParamClearAlarm Setting this attribute to ON, will enforce a clear
operation on the Port Alarms.
Upon completion, the value will automatically change
to off(2). | column | Enumeration | .1.3.6.1.4.1.164.6.2.15.5.1.1.8 |
| prtParamLeds This entry specifies the LEDs status of the port.
Each led is represented by 4 bits where the first 2 bits
(left) specify the status :
(00=NA, 01=OFF, 10=ON, 11=BLINK),
and the n… | column | OctetString | .1.3.6.1.4.1.164.6.2.15.5.1.1.9 |