pktSwchSnaPUX25QllcIdNumS
RAD-MIB ·
.1.3.6.1.4.1.164.8.11.8.1.4
Object
column
r/w
OctetString
Second part of the IBM device ID (the full ID is defined by the IDBLK and the IDNUM). The Idnum is required for secondary PU with Local XID handling. Up to 5 Hexadecimal digits, format: 0X XX XX.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.8.11.8.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- pktSwchSnaPUX25QllcEntryS
- Table
- pktSwchSnaPUSX25QllcTableS
- Siblings
- 12
Syntax
OctetString
Values & Constraints
Enumerated Values
1 | linkClosed |
2 | disconnected |
3 | linkOpening |
4 | disconnecting |
5 | frmrSent |
6 | linkOpened |
7 | localBusy |
8 | rejection |
9 | checkpointing |
10 | cpLocalBusy |
11 | cpRejection |
12 | resetting |
13 | remoteBusy |
14 | lBusyRBusy |
15 | rejLBusy |
16 | rejRBusy |
17 | cpRejLBusy |
18 | cpClearing |
19 | cpRejClr |
20 | rejLbusyRbusy |
21 | frmrReceived |
22 | programError |
23 | noChange |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pktSwchSnaPUX25QllcNumberS This parameter defines an identifier associated with the PU Entry
X25\QLLC side, which is unique within the SPS | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.11.8.1.1 |
| pktSwchSnaPUX25QllcAutoCallS This parameter indicates whether the SPS automatically initiates
an X.25 call request or not. | column | Enumeration | .1.3.6.1.4.1.164.8.11.8.1.10 |
| pktSwchSnaPUX25QllcCalledAddressS The destination x.25 DTE address to which the SPS calls. Used with
AutoCall only. | column | OctetString | .1.3.6.1.4.1.164.8.11.8.1.11 |
| pktSwchSnaPUX25QllcCallUserDataFacilitiesS The X.25 facilities and Call User Data which the SPS uses on
outgoing calls. AutoCall only.
Up to 60 Hexa-Decimal digits.
Each pair of digits represents a BYTE.
BYTE-0 BYTE-1 BYTE… | column | OctetString | .1.3.6.1.4.1.164.8.11.8.1.12 |
| pktSwchSnaPUX25QllcEntryStatusS The status of this PU Qllc table entry.
In order to save this entry, set status to valid.
An underCreation value is set by the Agent when this entry is updated. | column | Enumeration | .1.3.6.1.4.1.164.8.11.8.1.13 |
| pktSwchSnaPUX25QllcSideS Is there side A or B of the PU connection | column | Enumeration | .1.3.6.1.4.1.164.8.11.8.1.2 |
| pktSwchSnaPUX25QllcIdBlkS Part of the IBM device ID (the full ID is defined by the IDBLK and
the IDNUM). The Idblk is required for secondary PU with Local XID
handling. Up to 3 Hexadecimal digits, format:… | column | OctetString | .1.3.6.1.4.1.164.8.11.8.1.3 |
| pktSwchSnaPUX25QllcXIDInitS This parameter is not applicable for PU with Local XID handling.
Legal values:
1 - Do not initiate an XID message.
2 - Initiate an XID message to QLLC. | column | Enumeration | .1.3.6.1.4.1.164.8.11.8.1.5 |
| pktSwchSnaPUX25QllcMaxPiuSizeS Maximum Path Information Size | column | Integer32 | .1.3.6.1.4.1.164.8.11.8.1.6 |
| pktSwchSnaPUX25QllcStationAddressS QLLC PU Link Station Address. Range: 0x01-0xFE.
This parameter is applicable only for PU with End-to-End XID handling,
Support for NON-Activation XID. | column | OctetString | .1.3.6.1.4.1.164.8.11.8.1.7 |
| pktSwchSnaPUX25QllcInPasswordS A field matched with the call user data in call request packets for
purposes of security and correlation. | column | OctetString | .1.3.6.1.4.1.164.8.11.8.1.8 |
| pktSwchSnaPUX25QllcSubAddressS The X.25 Sub-address associated with the PU Entry for routing
incoming call indications. Range: 0-99. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.11.8.1.9 |