mdlKvf5PbxTsAssign
RAD-MIB ·
.1.3.6.1.4.1.164.3.6.2.3.1.5
Object
column
r/w
Enumeration
Ts Assignment group. Each KVF.5 card of the Mux should have a different value. For KVF.5/E1 values: 2,3,4,8,9,10,11,12 are applicable. For KVF.5/T1 values: 2,3,4,5,6,7 are applicable.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.6.2.3.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- mdlKvf5PbxEntry
- Table
- mdlKvf5PbxTable
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | notApplicable |
2 | bits8 |
3 | bits256 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mdlKvf5PbxConfigIdx This object indicates the Configuration number (1..255)
referred.
Value of 255 specifies the TmpCnfg (Scratch).
Write operation for the table entries is allowed only to
Config=… | column | Integer32 | .1.3.6.1.4.1.164.3.6.2.3.1.1 |
| mdlKvf5PbxDefABCD This object determines what KM will send for the ABCD Bits that
are not 'filled' by the dynamic signaling. This field is applicable
only for signaling transmit to PBX ('mdlKvf5Pb… | column | OctetString | .1.3.6.1.4.1.164.3.6.2.3.1.10 |
| mdlKvf5PbxFramerSlot This object indicates the Framer's slot number this card belongs to.
Several cards having the same mdlKvf5PbxFramerSlot value, work together
as a group. | column | Enumeration | .1.3.6.1.4.1.164.3.6.2.3.1.11 |
| mdlKvf5PbxCcsRate Determines the Ccs speed - for KVF.6 and KVF.5 cards. | column | Enumeration | .1.3.6.1.4.1.164.3.6.2.3.1.12 |
| mdlKvf5PbxTxAbcdBit This object is applicable only for KVF.6 and KVF.8 cards, when mdlKvf5PbxSig=cas(6).
It represents 4 parameters, by 2 Octets :
D Bit Code-MSB nibble,
C Bit Code- nibble,
B Bit … | column | OctetString | .1.3.6.1.4.1.164.3.6.2.3.1.13 |
| mdlKvf5PbxHdlcCrc Determines the CRC type of HDLC protocol, that CCS signaling
is working with. Applicable for KVF.6 cards when Signaling
is CCS (only). | column | Enumeration | .1.3.6.1.4.1.164.3.6.2.3.1.14 |
| mdlKvf5PbxSlotIdx This object indicates a unique number of the slot position
in which the module is inserted. | column | Enumeration | .1.3.6.1.4.1.164.3.6.2.3.1.2 |
| mdlKvf5PbxSig Signaling type.
When 'mdlKvf5PbxSig' is valid, 'mdlKvf5PbxSigTxPbx' and 'mdlKvf5PbxSigRxPbx'
are not valid.
mdlKvf5PbxSig - is supported by KVF.5 OLD SW ver and KVF.6 card.
mdl… | column | Enumeration | .1.3.6.1.4.1.164.3.6.2.3.1.3 |
| mdlKvf5PbxSigMode Signaling Mode. | column | Enumeration | .1.3.6.1.4.1.164.3.6.2.3.1.4 |
| mdlKvf5PbxCcsTs CCS TS of the KVF.5/T1/E1 and KVF.6/T1/E1 card.
It is applicable for Kmux KVF.5 Framer cards and KVF.6 cards
when mdlKvf5PbxSig=ccs.
Valid values:
1..24 - CCS TS of T1
1..31 - CCS… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.6.2.3.1.6 |
| mdlKvf5PbxOos 'idle' = '0' = on-hook, idle state
'busy' = '1' = off-hook, busy state
'forcedIdle' = SP = both A and B signaling bits are forced
to '0' during out-of-service perio… | column | Enumeration | .1.3.6.1.4.1.164.3.6.2.3.1.7 |
| mdlKvf5PbxSigTxPbx TxPbx signaling means transmit signaling from KM to PBX (KM-->PBX)
When 'mdlKvf5PbxSigTxPbx' is valid, 'mdlKvf5PbxSig' field is not valid.
mdlKvf5PbxSig - is supported by KVF.5 … | column | Enumeration | .1.3.6.1.4.1.164.3.6.2.3.1.8 |
| mdlKvf5PbxSigRxPbx RxPbx signaling means receive signaling from PBX to KM (PBX-->KM-->KM)
When 'mdlKvf5PbxSigRxPbx' is valid, 'mdlKvf5PbxSig' field is not valid.
mdlKvf5PbxSig - is supported by KVF… | column | Enumeration | .1.3.6.1.4.1.164.3.6.2.3.1.9 |