atmEtherCnfgAllocatedBuffers
RAD-MIB ·
.1.3.6.1.4.1.164.12.4.3.4.2.1.20
Object
column
r/w
Integer32
This object enables user to limit the amount of buffers
used by the connection.
The limit set by this object will give
the effect of a virtual buffer pool per connection.
The user can allocate between 10 to 217 buffers
to every connection. By default the limit is 50 buffers.
Sum of limits allocated to all connections
must not exceed the total amount of available buffers.
Whenever a connection exceeds it's buffer limit
due to congestion or burst traffic is discarded
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.12.4.3.4.2.1.20- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- atmEtherCnfgEntry
- Table
- atmEtherCnfgTable
- Siblings
- 20
Syntax
Integer32
Values & Constraints
Enumerated Values
7 | deleteLanTable |
255 | noOp |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| atmEtherCnfgCrossConnectIndex A unique value to identify this cross-connect. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.4.3.4.2.1.1 |
| atmEtherCnfgTrafficDescrIndex The value of this object identifies the row
in the atmTrafficDescrParamTable which
applies to the transmit direction of the VCL. | column | ATM-TC-MIBAtmTrafficDescrParamIndex | .1.3.6.1.4.1.164.12.4.3.4.2.1.10 |
| atmEtherCnfgEncapsulationMode deprecated This object define the encapsulation type requested
for the connection.
it indicates if we transfer the Ethernet frame to the
atm side without the Crc32- AtmBridgedEther,
or wi… | column | Enumeration | .1.3.6.1.4.1.164.12.4.3.4.2.1.11 |
| atmEtherCnfgPriority This object define the priority of connection.
The first parameter affects the transmition of cells in Conjested
network is the Service Category( Cbr has the highest priority and … | column | Enumeration | .1.3.6.1.4.1.164.12.4.3.4.2.1.12 |
| atmEtherCnfgRowStatus This object is used to create a new row or
modify or delete an existing row in this table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.164.12.4.3.4.2.1.13 |
| atmEtherCnfgRouterIP The interface IP address for SNMP requests. | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.164.12.4.3.4.2.1.14 |
| atmEtherCnfgRouterMask The interface IP address mask for SNMP requests. | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.164.12.4.3.4.2.1.15 |
| atmEtherCnfgRouterFragmentation Fragmentation. When application is not router value must be 'notApplicable'. | column | Enumeration | .1.3.6.1.4.1.164.12.4.3.4.2.1.16 |
| atmEtherCnfgRouterRIPMode RIP Mode. When application is not router value must be 'notApplicable'. | column | Enumeration | .1.3.6.1.4.1.164.12.4.3.4.2.1.17 |
| atmEtherCnfgRouterMTU deprecated . | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.4.3.4.2.1.18 |
| atmEtherCnfgPPPEncapsulation This object define the encapsulation type requested
for the connection.
rfc1483 - Multiprotocol Encapsulation over
ATM Adaptation Lay… | column | Enumeration | .1.3.6.1.4.1.164.12.4.3.4.2.1.19 |
| atmEtherCnfgAtmIfIndex The ifIndex associated to the ATM interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.4.3.4.2.1.2 |
| atmEtherCnfgPauseTrigger Enable/Disable LAN Pause triger from WAN connection | column | Enumeration | .1.3.6.1.4.1.164.12.4.3.4.2.1.21 |
| atmEtherCnfgAtmVpi The Vpi number of the ATM end point. | column | Integer32 | .1.3.6.1.4.1.164.12.4.3.4.2.1.3 |
| atmEtherCnfgAtmVci The Vci number of the ATM end point. | column | Integer32 | .1.3.6.1.4.1.164.12.4.3.4.2.1.4 |
| atmEtherCnfgEtherIfIndex The ifIndex associated to the atm-Ethernet interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.4.3.4.2.1.5 |
| atmEtherCnfgMacAddr deprecated The DFA number of the Ethernet end point. | column | MacAddress | .1.3.6.1.4.1.164.12.4.3.4.2.1.6 |
| atmEtherCnfgAdminStatus The requested state of the ATM to Ethernet connection. | column | Enumeration | .1.3.6.1.4.1.164.12.4.3.4.2.1.7 |
| atmEtherCnfgOperStatus The real operational status of the ATM to Ethernet connection. | column | Enumeration | .1.3.6.1.4.1.164.12.4.3.4.2.1.8 |
| atmEtherCnfgLastChange The value of sysUpTime at the time the ATM to Ethernet
connection entered its current operational state.
If the current state was entered prior to the last
re-initialization of th… | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.164.12.4.3.4.2.1.9 |