prtT3E3PrtIdx
RAD-MIB ·
.1.3.6.1.4.1.164.3.3.3.8.1.1.2
Object
column
SNMPv2-SMIInteger32
This attribute indicates a unique port number. For DXC: The same numbering as for prtGenPrtIdx. The valid port number depends on the IO slot no., the installed card type and the port type: outside, inside. * The external ports convention used will be (for DXC): - first two digits will be: (IO slot number+10) - last one/two digits will be the port number within the card, in odd numbers: port1 = 1 port2 = 3 port3 = 5 etc... Example: port2 of IO slot 11 will be: 213 . For Optimux-T3: Link-A: 51 Link-B: 61 .
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.3.3.8.1.1.2- Type
- column
- Access
- readonly
- Status
- current
- Parent
- prtT3E3CnfgEntry
- Table
- prtT3E3CnfgTable
- Siblings
- 8
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtT3E3CnfgIdx This attribute indicates the Idx of the Config being accessed.
Idx of 255 relates to the Temporary (Scratch) Config.
For DXC, write operations can be performed only on the Temp Co… | column | Integer32 | .1.3.6.1.4.1.164.3.3.3.8.1.1.1 |
| prtT3E3Slt This attribute indicates a unique number to identify the slot where
the card is inserted in.
When the unit is stand-alone, this object is not applicable
and 255 will be used. | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.8.1.1.3 |
| prtT3E3LineLength This object is the length of the ds3 line in feet.
It provides information for line build out circuitry if it exists
and can use this object to adjust the line build out.
len0… | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.8.1.1.4 |
| prtT3E3InbandMng A unique number to identify the Frame Type over the link.
For Optimux-T3: only values (4), (7) are supported. | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.8.1.1.5 |
| prtT3E3AisFrame This object is applicable only for Optimux-T3.
It allows user to select whether the AIS sent will be framed or unframed. | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.8.1.1.6 |
| prtT3E3TxClockSource Tx Clock Source. | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.8.1.1.7 |
| prtT3E3RoutProt Routing Protocol of the port.
This object is applicable only for T3 ports. | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.8.1.1.8 |
| prtT3E3AisTransmit Indicates if AIS signal will be transmitted over the tributary E3/DS3
upon failure. | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.8.1.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| modmSaConfigMode The mode indicates if the configuration parameters refer
the Central or the Remote Modem.
For AMC 102 the remote means regenerator.
There can be some regenerators connecting one… | column | Enumeration | .1.3.6.1.4.1.164.3.4.1.1.1.1.1 |