pktSwchFrCircuitIndexA
RAD-MIB ·
.1.3.6.1.4.1.164.8.8.6.1.2
Object
column
SNMPv2-SMIInteger32
This Index is the DLCI of the circuit.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.8.8.6.1.2- Type
- column
- Access
- readonly
- Status
- current
- Parent
- pktSwchFrCircuitAEntry
- Table
- pktSwchFrCircuitATable
- Siblings
- 25
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Object Constraints
range: 0-1023
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pktSwchFrCircuitIfIndexA This is the ifIndex of the circuit, according to RFC 1573. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.8.6.1.1 |
| pktSwchFrCircuitRxCommittedA The Rx committed rate in bytes per interval. | column | Integer32 | .1.3.6.1.4.1.164.8.8.6.1.10 |
| pktSwchFrCircuitRxExcessA The Rx excess in bytes per interval. | column | Integer32 | .1.3.6.1.4.1.164.8.8.6.1.11 |
| pktSwchFrCircuitFunnelIdA The funnel ID. | column | Integer32 | .1.3.6.1.4.1.164.8.8.6.1.12 |
| pktSwchFrCircuitFunnelStat The funnel status. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.164.8.8.6.1.13 |
| pktSwchFrCircuitTxCongDiscards The number of frames discarded because of Tx congestion. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.8.8.6.1.14 |
| pktSwchFrCircuitDeTxFrames The number of DE Tx frames. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.8.8.6.1.15 |
| pktSwchFrCircuitDeRxFrames The number of DE Rx frames. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.8.8.6.1.16 |
| pktSwchFrCircuitFecnTxFrames The number of FECN Tx frames. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.8.8.6.1.17 |
| pktSwchFrCircuitBecnTxFrames The number of BECN Tx frames. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.8.8.6.1.18 |
| pktSwchFrCircuitCommRateViolTxFrames The number of Tx committed rate violations in number of frames. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.8.8.6.1.19 |
| pktSwchFrCircuitCommRateViolRxFrames The number of Rx committed rate violations in number of frames. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.8.8.6.1.20 |
| pktSwchFrCircuitExcessRateViolTxFrames The number of Tx excess rate violations in number of frames. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.8.8.6.1.21 |
| pktSwchFrCircuitExcessRateViolRxFrames The number of Rx excess rate violations in number of frames. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.8.8.6.1.22 |
| pktSwchFrCircuitState Indicates whether the particular virtual cir-
cuit is new or not. | column | Enumeration | .1.3.6.1.4.1.164.8.8.6.1.23 |
| pktSwchFrCircuitExtendedDlciA The no. of the DLCI represented in 23 bits. | column | Integer32 | .1.3.6.1.4.1.164.8.8.6.1.24 |
| pktSwchFrCircuitTxPriorityA DLCI TX Priority level. The levels are defined in the
pktSwchTxPriorityTable | column | Integer32 | .1.3.6.1.4.1.164.8.8.6.1.25 |
| pktSwchFrCircuitIsdnRoutIdA ISDN destination. ID in the ISDN routing table containing
the outgoing ISDN address for this DLCI.
Default value: 0 for no ISDN routing ID. | column | Integer32 | .1.3.6.1.4.1.164.8.8.6.1.26 |
| pktSwchFrCircuitDestProtA The protocol encapsulation, if any, on this DLCI.
The MPE protocol is a proprietary RAD protocol that enables
a generic HDLC device to have multiple connections over X.25
or Frame… | column | Enumeration | .1.3.6.1.4.1.164.8.8.6.1.3 |
| pktSwchFrCircuitDestIdA If the DLCI destination protocol is none or async, this field
has a value of an existing DLCI or async channel, respectively.
Otherwise, a value of zero is used. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.164.8.8.6.1.4 |
| pktSwchFrCircuitBackIdA The backup DLCI which is used when the current DLCI goes inactive.
The destination protocol and destination id are the same as in the
current DLCI | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.164.8.8.6.1.5 |
| pktSwchFrCircuitTxCirIntervalA The Tx CIR interval in 1/10 seconds. | column | Integer32 | .1.3.6.1.4.1.164.8.8.6.1.6 |
| pktSwchFrCircuitTxCommittedA The Tx committed rate in bytes per interval. | column | Integer32 | .1.3.6.1.4.1.164.8.8.6.1.7 |
| pktSwchFrCircuitTxExcessA The Tx excess in bytes per interval. | column | Integer32 | .1.3.6.1.4.1.164.8.8.6.1.8 |
| pktSwchFrCircuitRxCirIntervalA The Rx CIR interval in 1/10 seconds. | column | Integer32 | .1.3.6.1.4.1.164.8.8.6.1.9 |