mdlSClearAlrCmd
RAD-MIB ·
.1.3.6.1.4.1.164.3.1.3.1.1.1.10
Object
column
r/w
Enumeration
Setting this command to ON, enforces a clear of all the alarms in the given slot, excluding alarms of port level. The clear operation will not be applied for masked/inverted alarms.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.1.3.1.1.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- mdlSInstEntry
- Table
- mdlSInstTable
- Siblings
- 11
Syntax
Enumeration
Values & Constraints
Enumerated Values
2 | off |
3 | event |
4 | minor |
5 | major |
6 | warning |
7 | critical |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mdlSInstSltIdx A unique number to identify a slot position in the mux.
In the ?004 Unit the entries PsB(2),ClB(4),io6(10)..io(16)
are not valid.
For the Vmux2100 Main Board clA (3) is used. | column | Enumeration | .1.3.6.1.4.1.164.3.1.3.1.1.1.1 |
| mdlSClearAllAlrCmd Setting this command to ON, enforces a clear of all the
alarms in the given slot, including all its ports alarms.
The clear operation will not be applied for masked/inverted
alar… | column | Enumeration | .1.3.6.1.4.1.164.3.1.3.1.1.1.11 |
| mdlSTemperature Temperature of the card, in Celsius degrees. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.3.1.1.1.12 |
| mdlSInstCardType This attribute indicates the type of card installed
in the specific slot position.
Only PS cards are possible in the PS slots.
Only CL cards are possible in the CL slots.
Only IO … | column | Enumeration | .1.3.6.1.4.1.164.3.1.3.1.1.1.2 |
| mdlSHwVersion This attribute indicates the Hardware version of the
installed card in the specific slot position. | column | OctetString | .1.3.6.1.4.1.164.3.1.3.1.1.1.3 |
| mdlSSwVersion This attribute indicates the Software version of the
installed card in the specific slot position. | column | OctetString | .1.3.6.1.4.1.164.3.1.3.1.1.1.4 |
| mdlSAlrStatus Indicates the alarm state at module level, i.e. lower level
(port alarms) status is not included.
This attribute will be set to:
critical(7) - when there is at least one active … | column | Enumeration | .1.3.6.1.4.1.164.3.1.3.1.1.1.5 |
| mdlSAlrStatusAll Indicates the alarm state in the module-all level, i.e. lower level
(port alarms) included.
This attribute will be set to:
critical(7) - when there is at least one active (state… | column | Enumeration | .1.3.6.1.4.1.164.3.1.3.1.1.1.6 |
| mdlSMaskedAlrStat Indicates the alarm state at module level, [i.e. lower level
(port alarms) status is not included],including Masked alarms.
This attribute will be set to:
critical(7) - when the… | column | Enumeration | .1.3.6.1.4.1.164.3.1.3.1.1.1.7 |
| mdlSMaskedAlrStatAll Indicates the alarm state in the module-all level, i.e. lower level
(port alarms) included, including Masked alarms.
This attribute will be set to:
critical(7) - when there is a… | column | Enumeration | .1.3.6.1.4.1.164.3.1.3.1.1.1.8 |
| mdlSTstStatusAll This attribute will be set to on(3) when there is at least
one test in progress on a channel of the card, otherwise
the value will be off(2). | column | Enumeration | .1.3.6.1.4.1.164.3.1.3.1.1.1.9 |