prtInPh1MlMinSeparators

RAD-MIB · .1.3.6.1.4.1.164.3.2.3.2.2.3.1.22

Object

column r/w Integer32

Minimum number of bytes separating between two adjacent frames (HDLC item).
0 = notApplicable

Context

MIB: RAD-MIB
OID: .1.3.6.1.4.1.164.3.2.3.2.2.3.1.22
Type: column
Access: readwrite
Status: current
Parent: prtInPh1MlCnfgEntry
Table: prtInPh1MlCnfgTable
Siblings: 23

Syntax

Integer32

Values & Constraints

Enumerated Values

`1`	notApplicable
`2`	r300bpsNLE
`3`	r600bpsNLE
`4`	r800bpsNLE
`5`	r1200bpsNLE
`6`	r2400bpsNLE
`7`	r4800bpsNLE
`8`	r9600bpsNLE
`9`	r14400bpsLE
`10`	r19200bpsNLE
`11`	r28800bpsLE
`12`	r32000bpsNLE
`13`	r38400bpsNLE
`14`	r48000bpsNLE
`15`	r56000bpsNLE
`16`	r57600bpsLE
`17`	r64000bpsNLE
`18`	r112000bps
`19`	r115200bps
`20`	r16000bpsNLE
`21`	r100bpsNLE
`22`	r128000bps
`23`	r24000bps

Related Objects

Sibling Objects

Object	Type	Syntax	OID
prtInPh1MlCnfgIdx This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.	column	Integer32	`.1.3.6.1.4.1.164.3.2.3.2.2.3.1.1`
prtInPh1MlTc This attribute indicates the Tc parameter which is the time period of the sliding window in which the Bc/Be are tested. The value of this parameter is identical for all the ports …	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.2.3.1.10`
prtInPh1MlFlowControl This attribute indicates the required flow control betweeen the port and the remote equipment.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.2.3.1.11`
prtInPh1MlSegment This object is the Segmentation in Bytes. In protocol FR+, ISDN internals, MX 30/300 the segmentation is: 50 (2) ,158 (3) ,266 (4) ,376 (5), 484 (6) …	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.2.3.1.12`
prtInPh1MlFrMngProt This object indicates the Frame-Relay management protocol. ansiT1 = ANSI T1.617 Annex D (this is the default value). This parameter is applicable only for FR and FR+ protocols. Wh…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.2.3.1.13`
prtInPh1MlEnqPeriod This object is the Status Enquiry Period, in seconds. It determines the frequency of the Status Enquiry message as sent by the FR user side. At the FR network side, it determines …	column	Integer32	`.1.3.6.1.4.1.164.3.2.3.2.2.3.1.14`
prtInPh1MlFullRptPeriod This object is the Full Report Frequency. It determines the number of the Status Enquiry messages sent by the FR user side, before a Full Report Request is sent. The units are : S…	column	Integer32	`.1.3.6.1.4.1.164.3.2.3.2.2.3.1.15`
prtInPh1MlFrWindowSize This object is the FR Window Size. It determines the number of samplings in the sliding window that counts the errors. This parameter is applicable only for FR and FR+ protocols A…	column	Integer32	`.1.3.6.1.4.1.164.3.2.3.2.2.3.1.16`
prtInPh1MlErrorsThreshold This object is the Max Errors. It determines the number of Status Enquiry Errors that occured within the FR sliding window, before this port is considered DOWN (threshold). This p…	column	Integer32	`.1.3.6.1.4.1.164.3.2.3.2.2.3.1.17`
prtInPh1MlMaxIdleTime Move to higher prioritized connected link after this period of seconds of silence on the current link. 0=Never. Never move to higher prioritized connected link. UNIT is seconds…	column	Integer32	`.1.3.6.1.4.1.164.3.2.3.2.2.3.1.18`
prtInPh1MlBearerCh Defines which B (bearer) channels are used for transferring ISDN data. Default value is: none (255). anyChannel (2) is skipped because it is not in use here.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.2.3.1.19`
prtInPh1MlSltType This attribute indicates a unique slot position where the card is inserted. For ISDN BRI port of MX300/30: io1(5) = isdn1(5) and io2(6) = isdn2(6) In the ?004 Unit the entries i…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.2.3.1.2`
prtInPh1MlAssociatedExCh This object indicates the external port associated to this internal port. At present, it is used by the Hybrid (mp2100h), MHS-4 cards which can have up to 64 dynamic internal port…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.2.3.1.20`
prtInPh1MlClockEncoding This object is the Encoding type of the Line. This parameter is applicable only for FR and FR+ protocols.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.2.3.1.21`
prtInPh1MlCcittCrc This object indicates how many Bits are used for CRC (HDLC item).	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.2.3.1.23`
prtInPh1MlFrameSeparator This object indicates what should be transferred on the line when there are no frames to pass (HDLC item). idles: mean that FF will pass on the line flags: mean that 7E will pass …	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.2.3.1.24`
prtInPh1MlPrtIdx This attribute indicates a unique port number. MPH.1/E1 and MPH.1/T1 cards have three internal interfaces. MX3000 modules may have up to 50 internal ports.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.2.3.2.2.3.1.3`
prtInPh1MlConnect This attribute indicates whether the port should be considered in any of the mux algorithms.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.2.3.1.4`
prtInPh1MlRate This attribute indicates the port speed.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.2.3.1.5`
prtInPh1MlProtocol This attribute indicates the applied protocol.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.2.3.1.6`
prtInPh1MlConnectionTyp This attribute indicates the link connection type. It is required for three reasons: FR/CR Inband management operation (LMI,CLMM...). CIR check. NMS network management. …	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.2.3.1.7`
prtInPh1MlCongResponse This attribute indicates how to handle the congestion indication to/from the mux internal connection side (for example transmit/receive becn to/from the network). no -…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.2.3.1.8`
prtInPh1MlCongLevel This attribute indicates the level of delayed data in precents of the total available dynamic memory, for which the port will start to operate . The resolution of the parameter is…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.2.3.2.2.3.1.9`