prtBertTxBits
RAD-MIB ·
.1.3.6.1.4.1.164.3.3.3.1.5.1.14
Object
column
SNMPv2-SMIInteger32
How many data bits were transmitted since BERT started to run, or since last counter clear (prtBertClearCounters set to on).
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.3.3.1.5.1.14- Type
- column
- Access
- readonly
- Status
- current
- Parent
- prtBertEntry
- Table
- prtBertTable
- Siblings
- 15
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Enumerated Values
1 | unknown |
2 | len0p133ft |
3 | len134p266ft |
4 | len267p399ft |
5 | len400p533ft |
6 | len534p655ft |
7 | fcc68 |
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtBertPrtIdx This attribute indicates a unique number to identify a port.
The valid port number depends on the IO slot no., the
installed card type and the port type: outside/external, insi… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.3.3.1.5.1.1 |
| prtBertClearCounters Setting this object to ON, will enforce a clear
operation of some BERT Counters. Upon completion,
the value will automatically change to off(2). | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.1.5.1.10 |
| prtBertSyncStatus Sync Status while BERT runs. | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.1.5.1.11 |
| prtBertTs This object indicates on which TSs of the selected port, BERT
should be applied.
Each Bit of the Octet represents a TS:
31 ......0
MSB LSB
Bit 0 will not be u… | column | OctetString | .1.3.6.1.4.1.164.3.3.3.1.5.1.12 |
| prtBertResult This object indicates Result of BERT
for the selected port
(number of error bits divided to the total
number of data bits.)
Applicable only if BERT is running on this port
… | column | OctetString | .1.3.6.1.4.1.164.3.3.3.1.5.1.13 |
| prtBertRxBits How many data bits were Received since BERT started
to run, or since last counter clear
(prtBertClearCounters set to on). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.3.3.1.5.1.15 |
| prtBertTxErrorBits Number of injected error bits since BERT started
to run, or since last counter clear
(prtBertClearCounters set to on). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.3.3.1.5.1.16 |
| prtBertPattern This object indicates the pattern of the BERT.
p2Exxm1 = 2Exx-1.
pxx = pattern xx.
This object is the same for all configurations.
notApplicable - when this object is not supp… | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.1.5.1.2 |
| prtBertInjectRate This object indicates the error rate injection of the BERT.
r10Emx = 10E-x
This object is the same for all configurations.
single - single error injection.
notApplicable - when th… | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.1.5.1.3 |
| prtBertInjectErrRateCmd This object controls activation/deactivation of the Error
Rate Injection during BERT. | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.1.5.1.4 |
| prtBertInjectSingleErrCmd This object enables to initiate a Single Error Injection
during BERT (on). Upon completion, the value will
automatically change to off(2). | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.1.5.1.5 |
| prtBertRunTime This object indicates how much time (seconds) passed since
BERT started to run. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.3.3.1.5.1.6 |
| prtBertESs How many Errored Seconds were detected since BERT started
to run.
Counter for Kmux and MP. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.3.3.1.5.1.7 |
| prtBertSyncLoss How many times Sync Loss was detected since BERT started
to run.
For some products: number of seconds in which Sync Loss occured
since BERT started to run. See product specificat… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.3.3.1.5.1.8 |
| prtBertErrorBits How many Error Bits were detected since BERT started
to run. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.3.3.1.5.1.9 |