prtHSInbandLoopDeactPattern
RAD-MIB ·
.1.3.6.1.4.1.164.3.3.3.3.1.1.12
Object
This object is a binary string of up to 8 bits. Though the syntax allows for any ASCII characters, for this object only '0' or '1' characters are valid. The string determines coefficients of the polynomial pattern sent to the port in order to Deactivate the Inband Loop. This object is relevant only when prtHSInbandLoopPatternCfg=userConfig.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.3.3.3.1.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- prtHSParamEntry
- Table
- prtHSParamTable
- Siblings
- 15
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtHSCnfgIdx This attribute indicates the Idx of the Config being accessed.
Idx of 255 relates to the Temporary (Scratch) Config. | column | Integer32 | .1.3.6.1.4.1.164.3.3.3.3.1.1.1 |
| prtHSInbandLoopPatternCfg This object indicates if Inband Loop polynomial pattern
will be according to RDL Loop (the standard) or User Configurated
according to prtHSActivatePolyPattern and prtHSDeactivate… | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.3.1.1.10 |
| prtHSInbandLoopActPattern This object is a binary string of up to 8 bits.
Though the syntax allows for any ASCII characters, for this object
only '0' or '1' characters are valid.
The string determines coef… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.164.3.3.3.3.1.1.11 |
| prtHSDCD Selection of DCD line state in the user data channel.
linkOK - DCD line is ON only when active link is OK.
on - DCD continuously ON. | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.3.1.1.13 |
| prtHSClkPolarity This object indicates the clock polarity. | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.3.1.1.14 |
| prtHSInterfaceType This object indicates the selected electrical interface type. | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.3.1.1.15 |
| prtHSUnframed Unframed line for HS ports.
yes - means that all TSs must be transferred, including TS0.
In this case, prtHSRate must be r31x56eq1736Kbps OR
r31x64eq1984Kbps. | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.3.1.1.16 |
| prtHSPrtIdx This attribute indicates a unique number to identify a port.
The valid port number depends on the IO slot no., the
installed card type and the port type: outside, inside,
SP.
… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.3.3.3.1.1.2 |
| prtHSSlt This attribute indicates a unique number to identify the slot where
the card is inserted in.
When the unit is stand-alone, this object is not applicable
and 255 will be used. | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.3.1.1.3 |
| prtHSRate This object indicates the port rate (speed).
auto - rate is selected automatically by system. | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.3.1.1.4 |
| prtHSFifoSize This object selects the size of the user data channel buffer
FIFO used in the DTE2 mode. In the other modes, buffer
size is automatically set by the DACS agent.
Buffer FIFO size… | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.3.1.1.5 |
| prtHSClkMode Clock Mode of the user data channel.
dce - DACS operates as a DCE and provides transmit
and receive clocks to the synchronous user DTE.
dte1- DACS supplies the receive clo… | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.3.1.1.6 |
| prtHSCTS Selection of CTS line state in the user data channel.
on - CTS continuously ON.
rts - CTS line follows the RTS line. | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.3.1.1.7 |
| prtHSRtsState RTS state of the port. | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.3.1.1.8 |
| prtHSInbandLoopback This object indicates if Inband Loopback from the Network
should be enabled or disabled. | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.3.1.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtDestCnfgIdx This attribute indicates the Idx of the Cnfg(1..255) being
accessed.
Idx of 255 relates to the TmpCnfg. | column | Integer32 | .1.3.6.1.4.1.164.3.3.3.5.2.1.1 |
| prtDestDimIdx This attribute indicates a unique port number of the
DIM card.
The convention used for DXC:
(IO slot number+10) & 1
Example: port1 of IO slot 11 will be: 211 . | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.3.3.5.2.1.2 |
| prtDestIdx This attribute indicates a destination number of the
DIM card. | column | Integer32 | .1.3.6.1.4.1.164.3.3.3.5.2.1.3 |