prtExHsrLinkTo
RAD-MIB ·
.1.3.6.1.4.1.164.3.2.3.2.10.1.1.12
Object
column
deprecated
r/w
Enumeration
It indicates the slot of the main link card to which the HS-R card is mapped. notApplicable - for HS-U/1 internal ports. STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot and prtGenCnfgLinkToPort.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.2.3.2.10.1.1.12- Type
- column
- Access
- readwrite
- Status
- deprecated
- Parent
- prtExHsrCnfgEntry
- Table
- prtExHsrCnfgTable
- Siblings
- 19
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | dce |
2 | extDce |
3 | dte1 |
255 | notApplicable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtExHsrCnfgIdx This object indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg | column | Integer32 | .1.3.6.1.4.1.164.3.2.3.2.10.1.1.1 |
| prtExHsrCts CTS.
This object is applicable for Async protocol only. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.10.1.1.10 |
| prtExHsrClkMode Clock mode.
This object is applicable for Sync protocol only. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.10.1.1.11 |
| prtExHsrDcdDsr DCD & DSR. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.10.1.1.13 |
| prtExHsrOperMode This object indicates the operation mode of the port.
normal = bi-directional (Tx/Rx)
unidirectRx = unidirectional Rx.
broadcast = Tx upon request. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.10.1.1.14 |
| prtExHsrRtsDtr RTS & DTR. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.10.1.1.15 |
| prtExHsrLlbEnable Enable/Disable LLB. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.10.1.1.16 |
| prtExHsrRlbEnable Enable/Disable RLB. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.10.1.1.17 |
| prtExHsrRateAdapt Rate Adaptation - takes a low rate and adapts it to 64Kbps.
This object specifies the means this adaptation is done by. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.10.1.1.18 |
| prtExHsrRemoteModem Remote modem.
asmi31s2 = ASMi-31/2 | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.10.1.1.19 |
| prtExHsrSltIdx This object indicates a unique slot position where
the card is inserted. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.10.1.1.2 |
| prtExHsrEncapsMode Low Speed encapsulation method over PCM.
When Encapsulation mode is Latency optimized, only rates up to 19.2 are supported.
In this case a double number of bits occ… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.10.1.1.20 |
| prtExHsrPrtIdx A unique prt identifier within the card.
Valid values:
For MP:
- For HS-R cards: exPrt1 (1) .. exPrt4 (4)
- For HS-U/1 cards: inPrt1 (101) .. inPrt4 (104)
- For HS-S12, H… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.2.3.2.10.1.1.3 |
| prtExHsrConnect This object indicates whether the port should be considered in
any of the mux algorithms. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.10.1.1.4 |
| prtExHsrProtocol This object indicates the protocol. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.10.1.1.5 |
| prtExHsrRate This object indicates the port speed.
The 16,32,48,56,64 and 128 kbps rates are applicable only for Sync
protocol.
The 57.6 and 115.2 kbps rates are applicable only for Async
prot… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.10.1.1.6 |
| prtExHsrDataBits Data Bits.
This object is applicable for Async protocol only. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.10.1.1.7 |
| prtExHsrParity - For HS-R card, this object indicates if the parity bit is needed or not.
Therefore, the 'no' and 'yes; values are applicable.
- For HS-S12, HS-U12, the parity type is selected:… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.10.1.1.8 |
| prtExHsrStopBits This object indicates the minimum number of stop bits in
the tx async frame.
This object is applicable for Async protocol only. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.10.1.1.9 |