prtGenCnfgPortId
RAD-MIB ·
.1.3.6.1.4.1.164.3.1.4.2.3.1.6
Object
column
r/w
Integer32
IO Port Id for V5.1 use. This object is applicable only for part of the PSTN and ISDN IO ports. Generally, 0 is a valid value. Nevertheless, for ports that do not support this object, the value will be: notApplicable= 0
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.1.4.2.3.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- prtGenCnfgEntry
- Table
- prtGenCnfgTable
- Siblings
- 11
Syntax
Integer32
Values & Constraints
Enumerated Values
1 | notApplicable |
2 | unBlock |
3 | block |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtGenCnfgIdx This attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg.
The write operation is valid only to the TmpCnfg. | column | Integer32 | .1.3.6.1.4.1.164.3.1.4.2.3.1.1 |
| prtGenCnfgProtectionMode This object indicates the Protection Mode of the port.
notApplicable- when Bus Protection Point=No.
For VC-4/Omni card this object is supported RO. | column | Enumeration | .1.3.6.1.4.1.164.3.1.4.2.3.1.10 |
| prtGenCnfgConnect This object indicates whether the port should be considered in
any of the mux algorithms. | column | Enumeration | .1.3.6.1.4.1.164.3.1.4.2.3.1.11 |
| prtGenCnfgSignalingType This object selects the Type of Signaling used by the port. | column | Enumeration | .1.3.6.1.4.1.164.3.1.4.2.3.1.12 |
| prtGenCnfgSltIdx This attribute indicates a unique slot position where
the card is inserted. | column | Enumeration | .1.3.6.1.4.1.164.3.1.4.2.3.1.2 |
| prtGenCnfgPrtIdx This attribute indicates a unique external or internal port number.
For MP:
exPrt1 (1) .. exPrt16 (16) ,
notApplicable(100),
inPrt1 (101) .. inPrt84 (184) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.4.2.3.1.3 |
| prtGenCnfgLinkToSlot This attribute indicates the slot of the ML card to which
the IO port is mapped. | column | Enumeration | .1.3.6.1.4.1.164.3.1.4.2.3.1.4 |
| prtGenCnfgLinkToPort This attribute indicates the port in the prtGenCnfgLinkToSlot of
the ML card to which the IO port is mapped.
For MP:
exPrt1 (1) ,
exPrt2 (2) ,
exPrt3 (3) ,
exPrt4 (4) … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.4.2.3.1.5 |
| prtGenCnfgBusConnection This object indicates the support of the card regarding Bus Connection.
Same value for all ports of the card.
partial = 2 Buses (AB)
full = 4 Buses (ABCD)
partial CD = 2 Buses … | column | Enumeration | .1.3.6.1.4.1.164.3.1.4.2.3.1.7 |
| prtGenCnfgInbandMng This object indicates whether Inband Management is used over the
link. | column | Enumeration | .1.3.6.1.4.1.164.3.1.4.2.3.1.8 |
| prtGenCnfgInbandMngRoutProt This object indicates the Inband Mng Routing Protocol of
the port. | column | Enumeration | .1.3.6.1.4.1.164.3.1.4.2.3.1.9 |