radMepTransmitLtmTargetMepId

RAD-MIB · .1.3.6.1.4.1.164.3.1.6.1.3.1.1.30
MIB view Table view

Object

column r/w SNMPv2-SMIUnsigned32 
The MEPID of another MEP in the same MA to which 
LTM is to be transmitted. This address will be used 
if the value of radMepTransmitLtmTargetIsMepId is yes (3).
802.1ag clause 12.14.7.4.2:c.

Context

MIB
RAD-MIB
OID
.1.3.6.1.4.1.164.3.1.6.1.3.1.1.30
Type
column
Access
readwrite
Status
current
Parent
radMepEntry
Table
radMepTable
Siblings
32

Syntax

SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Object Constraints
range: 1-96
Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
radOamIdx1
This object may indicate the Bridge Index or Configuration index.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.3.1.6.1.3.1.1.1
radMepOamDestAddrType
This object determines if the OAM messages are sent to user defined unicast address, or to RAD proprietary multicast address.
columnEnumeration.1.3.6.1.4.1.164.3.1.6.1.3.1.1.10
radMepOamDestMacAddr
This object determines the MAC address that OAM packets are sent to.
columnMacAddress.1.3.6.1.4.1.164.3.1.6.1.3.1.1.11
radMepDefaultPriority
This object defines the priority of the OAM messages sent when no service is defined on EVC. If a service is defined, the OAM messages will get the highest service priority exist…
columnUnsigned32.1.3.6.1.4.1.164.3.1.6.1.3.1.1.12
radMepCcStatus
This object indicates the Continuity Check (CC) status.
columnEnumeration.1.3.6.1.4.1.164.3.1.6.1.3.1.1.13
radMepOamProtocol
Determines whether to use proprietary OAM mechanism, or to use the standard (IEEE 802.1ag, ITU-T Y.1731).
columnEnumeration.1.3.6.1.4.1.164.3.1.6.1.3.1.1.14
radMepMdId
The index of the Maintenance Domain in the radMdTable (radMdIndex).
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.3.1.6.1.3.1.1.15
radMepMaFormat
The type (and thereby format) of the Maintenance Association Name.
columnEnumeration.1.3.6.1.4.1.164.3.1.6.1.3.1.1.16
radMepMaName
The Short Maintenance Association name.
columnOctetString.1.3.6.1.4.1.164.3.1.6.1.3.1.1.17
radMepSpVlanId
The SP (Service Provider) VLAN used when sending an OAM message.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.3.1.6.1.3.1.1.18
radMepCcInterval
Indicates the interval at which CCMs are sent by a MEP Valid only if radMepOamMode = initiate(4).
columnEnumeration.1.3.6.1.4.1.164.3.1.6.1.3.1.1.19
radOamEvcIdx
This object indicates the Index of the EVC (Ethernet Virtual Circuit) that the MEP is associated to.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.3.1.6.1.3.1.1.2
radMepTransmitLbmDestMacAddress
The Target MAC Address Field to be transmitted in the Loopback Message: For unicast MAC Address this is the unicast destination MAC address. For multicast MAC Address, this varia…
columnMacAddress.1.3.6.1.4.1.164.3.1.6.1.3.1.1.20
radMepTransmitLbmDestMepId
The MEPID of another MEP in the same MA to which the LBM is to be sent. This address will be used if the value of radMepTransmitLbmDestIsMepId is yes (3). 802.1ag clause 12.14.7.3…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.3.1.6.1.3.1.1.21
radMepTransmitLbmDestIsMepId
yes (3) indicates that MEPID of the target MEP is used for loopback transmission. no (2) indicates that unicast destination MAC address of the target MEP is used. 802.1ag clause 1…
columnEnumeration.1.3.6.1.4.1.164.3.1.6.1.3.1.1.22
radMepTransmitLbmMassages
The number of Loopback messages to be transmitted.
columnInteger32.1.3.6.1.4.1.164.3.1.6.1.3.1.1.23
radMepTransmitLbmVlanPriority
The priority to be used in the VLAN tag, if present, in the transmitted frame. The default value is CCM priority. 802.1ag clause 12.14.7.3.2:e
columnUnsigned32.1.3.6.1.4.1.164.3.1.6.1.3.1.1.24
radMepTransmitLbmVlanDropEnable
Drop Enable bit to be used in the VLAN tag, if present, in the transmitted frame. 802.1ag clause 12.14.7.3.2:e
columnEnumeration.1.3.6.1.4.1.164.3.1.6.1.3.1.1.25
radMepLbrIn
Total number of valid, in-order Loopback Replies received.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.3.1.6.1.3.1.1.26
radMepLbrInOutOfOrder
The total number of valid, out-of-order Loopback Replies received.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.3.1.6.1.3.1.1.27
radMepLbmOut
Total number of Loopback Messages transmitted.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.3.1.6.1.3.1.1.28
radMepTransmitLtmTargetMacAddress
The Target MAC Address Field to be transmitted in the Link Trace Message: A unicast destination MAC address. This address will be used if the value of radMepTransmitLtmTarget…
columnMacAddress.1.3.6.1.4.1.164.3.1.6.1.3.1.1.29
radMepIdx
This object indicates the ID of the MEP being accessed.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.3.1.6.1.3.1.1.3
radMepTransmitLtmTargetIsMepId
yes (3) indicates that MEPID of the target MEP is used for Linktrace transmission. no (2) indicates that unicast destination MAC address of the target MEP is used. 802.1ag clause …
columnEnumeration.1.3.6.1.4.1.164.3.1.6.1.3.1.1.31
radMepTransmitLtmTtl
The LTM TTL field. Default value, if not specified, is 64. The TTL field indicates the number of hops remaining to the LTM. Decremented by 1 each Linktrace Responder that handles …
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.3.1.6.1.3.1.1.32
radMepTransmitLtmActivationCmd
Activation command for starting Loop Trace. Set will be always to 'on' value. After operation was finished, Agent will turn the value to 'off'.
columnEnumeration.1.3.6.1.4.1.164.3.1.6.1.3.1.1.33
radMepRowStatus
This attribute allows to create/delete a row in this table.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.164.3.1.6.1.3.1.1.4
radMepLocalMepId
This object indicates the local MEP ID.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.3.1.6.1.3.1.1.5
radMepRemoteMepId
This atribute is currently implemneted at radMepCcTable, that supports multicast.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.3.1.6.1.3.1.1.6
radMepOamMode
This object determines the OAM mode of the MEP: disabled - no CC is initiated nor responded initiate - the device initiates and responds to CC react - the device does not initiate…
columnEnumeration.1.3.6.1.4.1.164.3.1.6.1.3.1.1.7
radMepContinuityVerMode
This object determines the OAM behavior of the MEP: disabled - no CC is done cc_based - CC is done based on incoming messages lb_based - CC is done based on loopback messages.
columnEnumeration.1.3.6.1.4.1.164.3.1.6.1.3.1.1.8
radMepMeLevel
At any point in a network, ME Level is used to distinguish between OAM signals belonging to different nested MEs. Maintenance Entity Levels are defined as follows: 0,1,2 are assi…
columnUnsigned32.1.3.6.1.4.1.164.3.1.6.1.3.1.1.9