prtHsfPrtIdx
RAD-MIB ·
.1.3.6.1.4.1.164.3.2.3.2.6.1.3
Object
column
Enumeration
This attribute indicates a unique external port index. Hs2 has only two ports (exPrt1,exPrt2). Hs3 has three ports (exPrt1,exPrt2,exPrt3). Hsq and hsqN has four ports. Hs6 has six external ports. Hs12 has twelve external ports. inPrt1, inPrt2 - are relevant for VID card.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.2.3.2.6.1.3- Type
- column
- Access
- readonly
- Status
- current
- Parent
- prtHsfCnfgEntry
- Table
- prtHsfCnfgTable
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtHsfCnfgIdx This attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relate to the TmpCnfg. | column | Integer32 | .1.3.6.1.4.1.164.3.2.3.2.6.1.1 |
| prtExHsfOperMode This object indicates the operation mode of the port.
normal = bi-directional (Tx/Rx)
unidirectRx = unidirectional Rx.
broadcast = Tx upon request.
bidirBcastRing = Bidirectional … | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.6.1.10 |
| prtExHsfInbandLoopback This object indicates if Inband Loopback from the Network
should be enabled or disabled. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.6.1.11 |
| prtExHsfClkPolarity This object indicates the clock polarity.
For FCD-M this object will be applicable only for the fixed HS port
(the fixed port on the device). | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.6.1.12 |
| prtExHsfControlSignal This object indicates the Control Signal according to G.797 ITU-T standard.
For FCD-M this object will be applicable for the fixed HS port
(the fixed port on the device) and HS-Q/… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.6.1.13 |
| prtExHsfBcastRingSrcPort This object is applicable only when prtExHsfOperMode=
bidirBcastRing. In this case, the values mean:
- none - this port will be connected to ML in TSA as usual.
- exPrt1.. exPrtX… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.6.1.14 |
| prtHsfSltIdx This attribute indicates a unique slot position where
the card is inserted.
In the ?004 Unit the entries io6(10)..io16) are not valid. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.6.1.2 |
| prtExHsfConnect This attribute indicates whether the port should be
considered in any of the mux algorithms. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.6.1.4 |
| prtExHsfRate This attribute indicates the port speed. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.6.1.5 |
| prtExHsfClkMode This attribute indicates a unique port operation clock mode. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.6.1.6 |
| prtExHsfCts This attribute indicates a unique CTS control line
operation mode. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.6.1.7 |
| prtExHsfFifoSize Size in bits. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.6.1.8 |
| prtExHsfLinkTo deprecated This attribute indicates a slot of Main Link module, that the
port is linked to. This object is the same for all the
ports in the specific card because of HW limitations.
STATUS … | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.6.1.9 |