prtHsLsIdx
RAD-MIB ·
.1.3.6.1.4.1.164.3.6.3.2.1.1.2
Object
column
SNMPv2-SMIInteger32
The prtGenPrtIdx index of this channel. In KHSU.1 and KHSU.2 there are three ISDN sub-channels on each port (2B+D).The sub-channels are numbered: Slot*100+11 ; Slot*100+12 ; Slot*100+13 (First Port), Slot*100+14 ; Slot*100+15 ; Slot*100+16 (Second Port).
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.6.3.2.1.1.2- Type
- column
- Access
- readonly
- Status
- current
- Parent
- prtHsLsEntry
- Table
- prtHsLsTable
- Siblings
- 11
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtHsLsCnfgIdx This attribute indicates the Idx of the Config being accessed.
Idx of 255 relates to the Temporary (Scratch) Config.
Write operation for the table entries is allowed only to
Conf… | column | Integer32 | .1.3.6.1.4.1.164.3.6.3.2.1.1.1 |
| prtHsLsDsrMode DSR Mode. | column | Enumeration | .1.3.6.1.4.1.164.3.6.3.2.1.1.10 |
| prtHsLsSpeed KLS.1 supports (Kbps): 0.3, 0.6, 1.2, 2.4, 4.8, 9.6, 19.2, 38.4.
KLS.1/New, KDI/CH support (Kbps):
Group 1: 0.3, 0.6, 1.2, 2.4, 4.8, 9.6,
… | column | Enumeration | .1.3.6.1.4.1.164.3.6.3.2.1.1.11 |
| prtHsLsUType U Interface Type. Applicable for KHSU.1/2 cards.
The value will be the same for B1 and B2 pair; B3 and B4. | column | Enumeration | .1.3.6.1.4.1.164.3.6.3.2.1.1.12 |
| prtHsLsSlt This attribute indicates a unique number to identify the slot where
the card is inserted in.
In the 2104 Unit the entries kmxIO5(111)..kmxIO12(118) are not valid.
The entry kmxOpt… | column | Enumeration | .1.3.6.1.4.1.164.3.6.3.2.1.1.3 |
| prtHsLsCommProtocol The communication protocol. | column | Enumeration | .1.3.6.1.4.1.164.3.6.3.2.1.1.4 |
| prtHsLsAsyncDataLen Async Data Length in Bits.
notApplicable - when prtHsLsCommProtocol=sync or
notApplicable. | column | Enumeration | .1.3.6.1.4.1.164.3.6.3.2.1.1.5 |
| prtHsLsTiming The variable is RW only if the communications protocol is
sync.
When the comm protocol is async, the variable is RO and its
value is DCE. | column | Enumeration | .1.3.6.1.4.1.164.3.6.3.2.1.1.6 |
| prtHsLsCtrlSignal Control signals. | column | Enumeration | .1.3.6.1.4.1.164.3.6.3.2.1.1.7 |
| prtHsLsCts CTS Signal. | column | Enumeration | .1.3.6.1.4.1.164.3.6.3.2.1.1.8 |
| prtHsLsRtsCtsDelay RTS-CTS delay in ms.
notApplicable - when prtHsLsCts=on. | column | Enumeration | .1.3.6.1.4.1.164.3.6.3.2.1.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| sysGenLogIndex The index of the log Table. | column | Integer32 | .1.3.6.1.4.1.164.3.7.1.1.4.1.1 |