prtMonitoredPort
RAD-MIB ·
.1.3.6.1.4.1.164.3.3.3.1.6.1.5
Object
This object indicates the MONITORED Port Index that the Monitoring
port monitors.
For DXC:
The valid port number depends on the IO slot no., the
installed card type and the port type: external, internal.
* The external ports will according to the convention (for DXC):
- first two digits will be: (IO slot number+10)
- last one/two digits will be the port number within the
card, in odd numbers:
port1 = 1
port2 = 3
port3 = 5
etc...
Example: port2 of IO slot 11 will be: 213 .
* The internal ports will be according to the convention (for DXC):
- first two digits will be: (IO slot number+10)
- last one/two digits will be the port number within the
card, in even numbers:
port1 = 2
port2 = 4
port3 = 6
etc...
Example: port2 of IO slot 11 will be: 214 .
* 100 - no port monitored
For Optimux-T3:
The valid channels are:
0 = no Ch monitored
1..21 or 1..28 (=CH1..CH21 or CH1..CH28) according to product's
configuration.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.3.3.1.6.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- prtMonEntry
- Table
- prtMonTable
- Siblings
- 5
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Enumerated Values
1 | notApplicable |
2 | off |
3 | on |
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtMonCnfgIdx This object indicates the Idx of the Cnfg(1..255) being
accessed.
Idx of 255 relates to the TmpCnfg.
For products that do not support configurations, 1 will be always used. | column | Integer32 | .1.3.6.1.4.1.164.3.3.3.1.6.1.1 |
| prtMonitoringIdx This object indicates the Monitoring Port Index.
For DXC:
The valid port number depends on the IO slot no., the
installed card type and the port type: external, internal.
* The … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.3.3.1.6.1.2 |
| prtMonitoringEnable This object indicates if the prtMonitoringIdx is configured as
a monitoring port or not.
disabled = the port is NOT configured to monitor. Setting this object
to t… | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.1.6.1.3 |
| prtMonitoringTSs This object indicates which TSs of the Monitoring port,
the test equipment should monitor.
Each Bit of the Octet represents a TS:
31 ......0
MSB LSB
Bit 0 wil… | column | OctetString | .1.3.6.1.4.1.164.3.3.3.1.6.1.4 |
| prtMonitoredTSs This object indicates which TSs of the Monitored port, should be monitored.
Each Bit of the Octet represents a TS:
31 ......0
MSB LSB
Bit 0 will not be used.
I… | column | OctetString | .1.3.6.1.4.1.164.3.3.3.1.6.1.6 |