atmConfIfLowerVpi
RAD-MIB ·
.1.3.6.1.4.1.164.12.3.2.1.1.1.11
Object
The Lower possible VPI.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.12.3.2.1.1.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- atmNteConfIfEntry
- Table
- atmNteConfIfTable
- Siblings
- 12
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Enumerated Values
2 | disabled |
3 | segmentAis |
4 | segmentRdi |
5 | segmentAisAndRdi |
6 | endToEndAis |
7 | endToEndRdi |
8 | endToEndAisAndRdi |
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| atmConfIfTransmitClk The transmit clock of the port. | column | Enumeration | .1.3.6.1.4.1.164.12.3.2.1.1.1.1 |
| atmConfIfAllocatedBw Total VC Bandwidth Allocation. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.3.2.1.1.1.10 |
| atmConfIfOamMode OAM support Mode, which determines the
interface's location in a segment wise. | column | Enumeration | .1.3.6.1.4.1.164.12.3.2.1.1.1.12 |
| atmConfIfOamFailureInd This object allows user to define the type of indication
(if any) that will be created upon a LB cell failure,
for all VCs on which OAM loopback traffic is activated.
disabl… | column | Enumeration | .1.3.6.1.4.1.164.12.3.2.1.1.1.13 |
| atmConfIfLoopback Interface Loopback. | column | Enumeration | .1.3.6.1.4.1.164.12.3.2.1.1.1.2 |
| atmConfIfFrameType The frame type. Valid values for a 155M interface:
sonet(2), sdh(3). Valid values for a T3 interface:
direct(4), plcpInternal(5), plcpExternal(6),
directNoScrmbling(10), plcpInte… | column | Enumeration | .1.3.6.1.4.1.164.12.3.2.1.1.1.3 |
| atmConfIfCardType deprecated The card type. | column | Enumeration | .1.3.6.1.4.1.164.12.3.2.1.1.1.4 |
| atmConfAtmIfVpiVciLimit The limit on the sum of the VPI+VCI bits for this interface. | column | Enumeration | .1.3.6.1.4.1.164.12.3.2.1.1.1.5 |
| atmConfIfHwFeatures HW features command. | column | Enumeration | .1.3.6.1.4.1.164.12.3.2.1.1.1.6 |
| atmConfIfOutputRate This parameter indicates the output rate in cells/sec, which is
supported per port. Successfully setting this parameter
is dependent on all other ports values calculations,
whi… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.3.2.1.1.1.7 |
| atmConfIfInputRate This parameter indicates the input rate in cells/sec, which is
supported per port. Successfully setting this parameter
is dependent on all other ports values calculations,
whic… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.3.2.1.1.1.8 |
| atmConfAlarmForwarding Enables Path AIS Alarm forwarding upon a failure detection. The
following might be considered as a failure: LOS, LOF, LOC, SLM,
LOP, Path AIS and Line AIS.
disabl… | column | Enumeration | .1.3.6.1.4.1.164.12.3.2.1.1.1.9 |