prtExPh1MlTsTestDuration
RAD-MIB ·
.1.3.6.1.4.1.164.3.2.3.2.2.2.1.12
Object
This attribute indicates the maximum duration of executing
a test on the specific TS. This entry applies to all the
test operations.
For the Vmux2100 the values are:
0 - 60 seconds.
A zero value specifies no time limitation.
When the test isn't active, the agent initiates this object to
2 when the duration is needed and to 0 if its not required.
The user should set this parameter after setting the
'prtExPh1MlTsTest' parameter.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.2.3.2.2.2.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- prtExPh1MlTsEntry
- Table
- prtExPh1MlTsTable
- Siblings
- 16
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Object Constraints
range: 1-8
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtExPh1MlTsCnfgIdx This attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg. | column | Integer32 | .1.3.6.1.4.1.164.3.2.3.2.2.2.1.1 |
| prtExPh1MlTsType The Time Slot Type.
Transparent - means that the Time Slot will be Rx/Tx as is without processing it.
If the device requires more than 1 unique data … | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.2.1.10 |
| prtExPh1MlTsBundle The number of the bundle containing this Time Slot.
If no bundle exists for this TS or the bundle number
is irrelevant, the value will be 0. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.2.3.2.2.2.1.11 |
| prtExPh1MlTsSubChType The Time Slot Sub-Channel Type.
This variable is relevant only when Time-Slot Type is SubCh
(e.g. prtExPh1MlTsType = subCh1...subCh8). | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.2.1.13 |
| prtExPh1MlTsSubChMask The Sub-Channel Type Mask.
This variable is relevant only when Time-Slot Type is SubCh
(e.g. prtExPh1MlTsType = subCh1...subCh8). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.2.3.2.2.2.1.14 |
| prtExPh1MlTsChRate The Rate of the Signaling Channel.
notApplicable(1) when TS Type is other than Signaling or Transparent | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.2.1.15 |
| prtExPh1MlTsByteReversal Byte Reversal.
This variable defines whether the LSB or MSB is transmitted first.
no(2) - MSB is transmitted first
yes(3) - LSB is transmitted first. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.2.1.16 |
| prtExPh1MlTsSigProfile This object indicates the Signaling Profile of the port.
It is applicable only when prtMl4SigProfile=perTS.
p1 = profile 1
p2 = profile 2
p3 = profile 3
p4 = profile 4
p5 = p… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.2.1.17 |
| prtExPh1MlTsSltIdx This attribute indicates a unique slot position where
the card is inserted.
In the ?004 Unit the entries io6(10)..io16) are not valid.
For the Vmux2100 Main Board notApplicable … | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.2.1.2 |
| prtExPh1MlTsPrtIdx This attribute indicates a unique port number.
MPH.1/E1 and MPH.1/T1 cards have only one external interface.
exPrt2 - for ME1-2, MT1-2 and mhsPri cards.
exPrt3, exPrt4 - … | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.2.1.3 |
| prtExPh1MlTsIdx This attribute indicates a unique time slot position.
The valid time slots are 1..24 for T1 Card and
1..31 for E1 interface. In G732S-E1 lines time slot 16 is not
valid for data,… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.2.3.2.2.2.1.4 |
| prtExPh1MlTsIConSlot This attribute indicates whether the specified time slot is
connected/routed internally in the Agent and to which card
it is connected.
In the ?004 Unit the entries io6(10)..io16)… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.2.1.5 |
| prtExPh1MlTsIConPrt This attribute indicates the internally (In Mux)
connected/routed port.
For MP, the values will be:
{
exPrt1 (1) ,
exPrt2 (2) ,
exPrt3 (3) ,
… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.2.3.2.2.2.1.6 |
| prtExPh1MlTsIConTs This attribute indicates a unique time slot position.
The valid time slots are 1..24 for T1 Card and
1..31 for E1 interface. In G732S-E1 lines time slot 16 is not
valid for data,… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.2.3.2.2.2.1.7 |
| prtExPh1MlTsExt A pointer to an extension of this table:
prtExTsSplitTable.
- If prtExPh1MlTsIConSlot='split', its value
should be set to the OBJECT IDENTIFIER of the
prtExTsSplitTable, with … | column | ObjectIdentifier | .1.3.6.1.4.1.164.3.2.3.2.2.2.1.8 |
| prtExPh1MlTsTest This attribute indicates a test to be activated on the selected TS.
It is applicable only when prtSTstCmd=testPerTS(31).
notApplicable - when prtSTstCmd is NOT testPerTS(31).
none… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.2.1.9 |