prtExVc2BusProtectionPoint
RAD-MIB ·
.1.3.6.1.4.1.164.3.2.3.2.5.1.39
Object
column
r/w
Enumeration
This object defines if the port is Bus Protection Point or not. notApplicable - when prtExVc2DspMode=pointToPoint. When we have a chain of devices where the edge devices ports are the Bus Protection Point, user must configure one of these ports as 'first' and the other as 'last'. It does not matter which one, it just matters that they will be different.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.2.3.2.5.1.39- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- prtVc2CnfgEntry
- Table
- prtVc2CnfgTable
- Siblings
- 39
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtVc2CnfgIdx This attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg | column | Integer32 | .1.3.6.1.4.1.164.3.2.3.2.5.1.1 |
| prtExVc2Oos This object is equal for all the ports in the specific card
because of HW limitations | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.5.1.10 |
| prtExVc2LinkTo deprecated This attribute indicates the slot of the ML card to which
the VC card is mapped.
STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot
and prtGenCnfgLinkToPort. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.5.1.11 |
| prtExVc2OperMode This object indicates the operation mode of the port.
normal = bi-directional (Tx/Rx)
unidirectRx = unidirectional Rx.
broadcast = Tx upon request. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.5.1.12 |
| prtExVc2SigProfile This object indicates the Signaling Profile of the port.
notApplicable - for VC-2 family and when
prtExVc2Sig=noSignaling(1)
p1 = profile 1
p2 = profile 2
p3 = pro… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.5.1.13 |
| prtExVc2CallEnable This object indicates the Enabled Call direction.
notApplicable - for all cards except VC-2/R2.
both - incoming + outgoing. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.5.1.14 |
| prtExVc2R2Delay This object indicates the R2 Delay.
notApplicable - for all cards except VC-2/R2. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.5.1.15 |
| prtExVc2CasStd This object indicates the CAS (Channel Associated Signaling)
Standard.
notApplicable - for all cards except VC-2/R2. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.5.1.16 |
| prtExVc2EchoCanceler Echo canceler activation.
notApplicable - for VC-2 and VC-6 cards. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.5.1.17 |
| prtExVc2IfType Interface Type. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.5.1.18 |
| prtExVc2Encoding Voice Encoding Mode.
linear - is relevant only for the ports of VC-16A card. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.5.1.19 |
| prtVc2SltIdx This attribute indicates a unique slot position where
the card is inserted.
For Stand Alone products like WR: notApplicable (255) | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.5.1.2 |
| prtExVc2TxBitCode - - - For MP & FCD - - -
This object represents 4 parameters, by 2 Octets :
Tx D Bit Code-MSB nibble,
Tx C Bit Code- nibble,
Tx B Bit Code- nibble,
Tx A Bit C… | column | OctetString | .1.3.6.1.4.1.164.3.2.3.2.5.1.20 |
| prtExVc2RxBitOutput - - - For MP (VC-Q card only) & FCD - - -
This object represents 3 parameters by 2 Octets:
Spare -MSB nibble, always=0 hex
E Lead Output - nibble,
Reverse Polar… | column | OctetString | .1.3.6.1.4.1.164.3.2.3.2.5.1.21 |
| prtExVc2MeterRate This entry is applicable only for VC-6A/FXO, VC-6A/FXS, VC-8/FXO,
VC-8/FXS, VC-16/FXO and VC-16/FXS.
Meter Rate means rate of Call Meter in Public Phones, in KHz units.
For some c… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.5.1.22 |
| prtExVc2IfSignaling This entry is applicable only for VC-6A, VC-6AG, VC-8/FXO, VC-8/FXS,
VC-16/FXO and VC-16/FXS cards.
Interface Analog Signaling.
Must be the same for all card's ports.
loopStart - … | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.5.1.23 |
| prtExVc2SeizeAck This parameter shows whether the device will acknowledge
a seize signal (On/Off Hook).
When the value is set to yes(3) & the device receives an on/off hook signal
it will transmit… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.5.1.24 |
| prtExVc2EandMType This is the signaling type on the E&M analog side.
The analog signaling includes voltage, no. of pins and other parameters. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.5.1.25 |
| prtExVc2RemType Remote Type.
Applicable for VC-6A/4LB card &
for IPMUX-1E Far End Type - E1,T1(T1-ESF) or T1-D4 . | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.5.1.26 |
| prtExVc2ConvTime Conversation Time in minutes.
Applicable for VC-6A/4LB card. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.5.1.27 |
| prtExVc2SigFeedback Signaling Feedback.
Applicable for VC-8/FXO and VC-16/FXO cards. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.5.1.28 |
| prtExVc2EchoCancelerModule This parameter indicates whether Echo canceler module exists for this port. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.5.1.29 |
| prtVc2PrtIdx A unique identifier of the port, within the card.
For MP-2100/2200 card ports, Web Ranger and FCD-IP Voice ports
the values will be:
exPrt1 (1)
exPrt2 (2)
exPrt3 (… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.2.3.2.5.1.3 |
| prtExVc2ReversePolarity This object Enables/Disables Reverse Polarity for this port. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.5.1.30 |
| prtExVc2RingerFrequency This object selects the Ringer Frequency (Hz) for this port. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.5.1.31 |
| prtExVc2SigService Signaling Service.
advanced - is relevant only for ports of VC-8, VC-16 FXS cards.
It is used for Signaling Services of V5.1 or R2. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.5.1.32 |
| prtExVc2CallerIdEnable This object Enables/Disables Receiving the Caller Id number from the
remote side, for this port/channel. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.5.1.33 |
| prtExVc2CompressMethod This object is applicable only when prtExVc2Encoding=adpcm.
It defines which method is used for Compression.
g726 - for 4 bits (the standard method).
g726 - for 3 bits. It is espe… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.5.1.34 |
| prtExVc2ObMode This object defines the Net operation mode of the Omni-Bus card's port.
pointToPoint - only 2 end-point ports talk; like any other voice card
omniBus - many talk and listen. … | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.5.1.35 |
| prtExVc2VAD This object defines whether Voice Activation Detector (VAD)
will be On or Off.
off - will be usually selected when a Modem is connected
to the port; not a phone.
not… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.5.1.36 |
| prtExVc2NoiseLevelForVAD This object defines the Level of Noise on the line,
the Voice Activation Detector (VAD) will have to deal with.
notApplicable - when prtExVc2VAD=off. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.5.1.37 |
| prtExVc2WesternSigMode This object defines the Western Signaling Mode.
detector - detects signal and passes it as is.
generator - generates the signal.
notApplicable - when Western HW is not installed. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.5.1.38 |
| prtExVc2Connect This attribute indicates whether the port should be
considered in any of the mux algorithms. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.5.1.4 |
| prtExVc2ImpedanceStandard This object defines the Standard used for Impedance.
-G.712 - 600 Ohm - used in USA and other countries.
-Q552/ETSI - used in some countries in Europe
-Q522/Italy - used in Italy. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.5.1.40 |
| prtExVc2TransGain Transmit gain in dBm.
For ports of MP-104/204, MP-2100/2200 VC-6A, VC-6AG, VC-8
VC-4/Omni and VC-16 cards, the units will be 0.1dBm because
valid values can be in 0.5dBm steps. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.2.3.2.5.1.5 |
| prtExVc2ReceiveGain Receive gain in dBm.
For ports of MP-104/204, MP-2100/2200 VC-6A, VC-6AG, VC-8
VC-4/Omni and VC-16 cards, the units will be 0.1dBm because
valid values can be in 0.5dBm steps. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.2.3.2.5.1.6 |
| prtExVc2Wire For some cards, this object is equal for all the ports in the specific
card because of HW limitations.
For FXO & FXS this parameter is not applicable. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.5.1.7 |
| prtExVc2CodingLaw This attribute indicates the Method/Law for decoding/encoding the voice
information.
aLaw(1) is the standard Law for E1 links.
uLaw(2) is the standard Law for T1 links.
… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.5.1.8 |
| prtExVc2Sig This attribute indicates the method for decoding/encoding the signaling
information(on/off hook).
noSignaling (1) - not using signaling (only voice).
robbedBitMultiFrame(2)… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.5.1.9 |