pktSwchChannelClearTimerS
RAD-MIB ·
.1.3.6.1.4.1.164.8.2.2.1.1.15
Object
column
r/w
Integer32
Time limitation for an open session. A value of zero indicates that the Clear timer is not used.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.8.2.2.1.1.15- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- pktSwchChannelSEntry
- Table
- pktSwchChannelSTable
- Siblings
- 19
Syntax
Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pktSwchChannelIfIndexS This is used as the index for the channel table. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.2.2.1.1.1 |
| pktSwchChannelAutocallIntervalS The interval in seconds between consecutive autocall retries. | column | Integer32 | .1.3.6.1.4.1.164.8.2.2.1.1.10 |
| pktSwchChannelCallAliasS The alias to be sent after the call is set up. A value of zero
indicates that alias sending is disabled. The aliases are
configured on the Alias Table. | column | Integer32 | .1.3.6.1.4.1.164.8.2.2.1.1.11 |
| pktSwchChannelSubAddress1S The first subaddress for the channel. | column | Integer32 | .1.3.6.1.4.1.164.8.2.2.1.1.12 |
| pktSwchChannelSubAddress2S The second subaddress for the channel. | column | Integer32 | .1.3.6.1.4.1.164.8.2.2.1.1.13 |
| pktSwchChannelNUISEntry The number corresponding to the NUI information to be sent.
This number is the same as the pktSwchNuiGroupId. | column | Integer32 | .1.3.6.1.4.1.164.8.2.2.1.1.14 |
| pktSwchChannelOptionsS This controls the use of gneral non-correlated channel options.
The value is a sum of values (powers of two), where each value in
the sum represents an option.
The values that may… | column | Integer32 | .1.3.6.1.4.1.164.8.2.2.1.1.16 |
| pktSwchChannelClear The Clearing Channel operation disconnects all sessions | column | Enumeration | .1.3.6.1.4.1.164.8.2.2.1.1.17 |
| pktSwchChannelCopyTo The destination channel number, to which the Copy
is performed. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.2.2.1.1.18 |
| pktSwchChannelCopyToWMask The destination channel number, to which the Copy with Mask
is performed. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.2.2.1.1.19 |
| pktSwchChannelNumberS The number by which a channel is identified. | column | Integer32 | .1.3.6.1.4.1.164.8.2.2.1.1.2 |
| pktSwchChannelCopyMask The selected configuration parameters to be copied from the source
channel to the target channels. The value is a sum of values
(powers of two), where each value in the sum repres… | column | Integer32 | .1.3.6.1.4.1.164.8.2.2.1.1.20 |
| pktSwchChannelProfileS The profile that the channel uses for command mode operations. | column | Integer32 | .1.3.6.1.4.1.164.8.2.2.1.1.3 |
| pktSwchChannelOutCallProfileS The number of the profile that will be used during an outgoing
call on the channel. | column | Integer32 | .1.3.6.1.4.1.164.8.2.2.1.1.4 |
| pktSwchChannelInCallProfileS The number of the profile that will be used during an incoming
call on the channel. | column | Integer32 | .1.3.6.1.4.1.164.8.2.2.1.1.5 |
| pktSwchChannelRemoteProfileS The number of the profile that will be downloaded to the remote
PAD at the beginning of a new call. | column | Integer32 | .1.3.6.1.4.1.164.8.2.2.1.1.6 |
| pktSwchChannelAutocallIdS Selects the mnemonic (call ID) to be used as the first alternative.
A value of zero indicates that the autocall function is disabled. | column | Integer32 | .1.3.6.1.4.1.164.8.2.2.1.1.7 |
| pktSwchChannelAlterAutocallIdS Selects the alternate mnemonic for the autocall function. A value of zero indicates that the
alternate destination is not used. | column | Integer32 | .1.3.6.1.4.1.164.8.2.2.1.1.8 |
| pktSwchChannelAutocallRetriesS The number of autocall retries if the autocall setup request is
rejected with a busy cause. | column | Integer32 | .1.3.6.1.4.1.164.8.2.2.1.1.9 |