prtIsdnCallBackTimeout
RAD-MIB ·
.1.3.6.1.4.1.164.3.2.3.2.16.1.1.16
Object
This object is applicable only if 'prtIsdnFilter' is 'CallBack' and determines how long to wait from receiving the incoming call until initiating the call back call. The vaules range should be '1..20 sec' and the default 10 sec.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.2.3.2.16.1.1.16- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- prtIsdnCnfgEntry
- Table
- prtIsdnCnfgTable
- Siblings
- 15
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtIsdnCnfgIdx This attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg. | column | Integer32 | .1.3.6.1.4.1.164.3.2.3.2.16.1.1.1 |
| prtIsdnNumOfAbstractTerm An object for KM2100/4 agents.
255=Not Applicable
When ISDN Standard = ETSI or NTT (European) the value should be 255 (NotApplicable)
else If ML speed is 64Kbps value should… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.2.3.2.16.1.1.10 |
| prtIsdnSwitchMode For KM2100.
auto - The call is initiated automatically by one of the IO cards connected
to KML.10(ISDN card) having ISDN Switch Mode.
manual - The call is initiated by … | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.16.1.1.11 |
| prtIsdnAbSide This parameter indicates the QSIG side in layer 3.
This definition is from the QSIG Standard. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.16.1.1.12 |
| prtIsdnQsigRole This parameter indicates the QSIG side in layer 1 & 2. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.16.1.1.13 |
| prtIsdnInterface It indicates the interface type:
lt = line termination
nt = network termination
te = terminal equipment. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.16.1.1.14 |
| prtIsdnCallMode This object indicates the acceptance of incoming calls.
Initiate - Callout
Listen - Callin. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.16.1.1.15 |
| prtIsdnSltIdx This attribute indicates a unique slot position where
the card is inserted.
In the ?004 Unit the entries io6(10)..io12(16) are not valid
For KM2100/4 Valid entries are 'kmxMlA '… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.16.1.1.2 |
| prtIsdnPrtIdx This attribute indicates a unique port number.
For MAXcess the values will be:
exPrt1(1),
exPrt2(2),
exPrt3(3),
exPrt4(4),
For KM-2100 the port index is calculated as… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.2.3.2.16.1.1.3 |
| prtIsdnConnect This attribute indicates if the port is connected. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.16.1.1.4 |
| prtIsdnSignalingProtocol This attribute fixes which signaling protocol
is used at this port (D-Channel).
It is equivalent to isdnSignalingProtocol
in the isdn MIB. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.16.1.1.5 |
| prtIsdnBasicRateLineTopology This attribute is relevant for ISDN BRI only.
It is equivalent to isdnBasicRateLineTopology
in the isdn MIB. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.16.1.1.6 |
| prtIsdnMode This attribute allows the user to configure the port as
leased(2) in case of connection to a TDM network. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.16.1.1.7 |
| prtIsdnFilter This attribute allows the user to configure the port:
answerAll(2): accept all incoming calls,
rejectAll(3): reject all incoming calls,
selective(4): accept or reject according di… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.16.1.1.8 |
| prtIsdnSimultaneousCall In case of simultaneous call (local,remote and remote,local):
accept(2): accept the incoming call,
reject(3): reject the incoming call. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.16.1.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| pLinkCnfgIdx This attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg. | column | Integer32 | .1.3.6.1.4.1.164.3.2.3.2.17.3.1.1 |
| pLinkSltIdx Slot Index | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.17.3.1.2 |
| pLinkPrtIdx This attribute indicates a unique port number.
This port number should be the link selector number. | column | Integer32 | .1.3.6.1.4.1.164.3.2.3.2.17.3.1.3 |
| pLinkIdx This index is the row number. | column | Integer32 | .1.3.6.1.4.1.164.3.2.3.2.17.3.1.4 |