ip2IfStatTxOnMaxSize

RAD-MIB · .1.3.6.1.4.1.164.3.1.6.7.7.1.6
MIB view Table view

Object

column SNMPv2-SMICounter32 
Number of frames that were transmitted due to reaching max.
frame size. The user can choose to Tx the Frame when it reaches the
Max size or when the packetizing time interval elapses.

Context

MIB
RAD-MIB
OID
.1.3.6.1.4.1.164.3.1.6.7.7.1.6
Type
column
Access
readonly
Status
current
Parent
ip2IfStatEntry
Table
ip2IfStatTable
Siblings
35

Syntax

SNMPv2-SMICounter32
Source
SNMPv2-SMICounter32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ip2IfStatChIndex
The channel index, which is actualy the bundle ID.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.164.3.1.6.7.7.1.1
ip2IfStatTxSignaling
Number of signaling frames that were transmitted.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.3.1.6.7.7.1.10
ip2IfStatTxVoice
Number of voice frames that were transmitted.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.3.1.6.7.7.1.11
ip2IfStatTxHdlc
Number of HDLC frames that were transmitted.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.3.1.6.7.7.1.12
ip2IfStatRdnFlip
Number of redundancy flips occured. This parameter counts only flips from this bundle to the other bundle in the redundancy couple.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.3.1.6.7.7.1.13
ip2IfFarEndTdmStatus
This variable indicates the Status of the Far-End TDM Line. It contains failure state information. The variable is a bit map represented as a sum, therefore, it can represent …
columnInteger32.1.3.6.1.4.1.164.3.1.6.7.7.1.14
ip2IfStatPsnTxFrames
Number of frames that were transmitted to PSN.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.3.1.6.7.7.1.15
ip2IfStatPsnRxFrames
Number of frames that were recieved from PSN.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.3.1.6.7.7.1.16
ip2IfStatMinJittBufLevel
The Minimum jitter buffer level (in msec).
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.3.1.6.7.7.1.17
ip2IfStatMaxJittBufLevel
The Maximum jitter buffer level (in msec).
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.3.1.6.7.7.1.18
ip2IfStatRecommendedJittBufSize
The Recommended jitter buffer Size (in msec). 0= not applicable.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.3.1.6.7.7.1.19
ip2IfStatSeqErrors
Number of events that the sequence number of an incoming Frame causes a transition from the 'sync' state to the 'out of sequence' state.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.164.3.1.6.7.7.1.2
ip2IfStatPsnSeqErrors
Number of times that the sequence number of an incoming Frame indicates Loss of Frame or Out of order occured in PSN.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.3.1.6.7.7.1.20
ip2IfStatPsnReorderFrames
Number of times that Frames had been reordered in PSN.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.3.1.6.7.7.1.21
ip2IfStatMinRoundTripDelay
The minimum Round Trip delay (in msec). 0= not applicable.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.3.1.6.7.7.1.22
ip2IfStatMaxRoundTripDelay
The maximum Round Trip delay (in msec). 0= not applicable.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.3.1.6.7.7.1.23
ip2IfStatAvrRoundTripDelay
The avarage Round Trip delay (in msec). 0= not applicable.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.3.1.6.7.7.1.24
ip2IfStatFrameTrackDupDrop
The number of packets dropped due to being duplicated. (duplicated packet means a packet that has the same sequential number as a packet being received previously).
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.3.1.6.7.7.1.25
ip2IfStatFrameTrackMissing
The number of packets that are missing. (Missing packet means an expected packet- according to the current sequential number - that was not received).
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.3.1.6.7.7.1.26
ip2IfStatFrameTrackLongSerMiss
The longest series of consecutive missing sequential numbers. Missing sequential numbers represent missing packets that was expected to be received successively.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.164.3.1.6.7.7.1.27
ip2IfStatTxMeasuredSilence
This object shows the percentage of Silence that was measured by the device for the current bundle in the transmitted payload. Relevant values: 0..100, 255. Default value is 50. 0…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.164.3.1.6.7.7.1.28
ip2IfStatRxMeasuredSilence
This object shows the percentage of Silence that was measured by the device for the current bundle in the received payload. Relevant values: 0..100, 255. Default value is 50. 0 me…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.164.3.1.6.7.7.1.29
ip2IfStatBufUnderflows
Number of events that the buffer underflows. This records the count of the number of events the Receive (Eth to TDM) buffer underflows. In the case of a continuous underflow cause…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.164.3.1.6.7.7.1.3
ip2IfStatHdlcCrcErr
This counter indicates the number of received HDLC frames with CRC errors.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.3.1.6.7.7.1.30
ip2IfStatHdlcAlignErr
This counter indicates the number of received HDLC frames with alignment errors.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.3.1.6.7.7.1.31
ip2IfStatHdlcOversize
This counter indicates the number of received HDLC frames longer than 1470.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.3.1.6.7.7.1.32
ip2IfStatHdlcUndersize
This counter indicates the number of received HDLC frames shorter than 4.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.3.1.6.7.7.1.33
ip2IfStatHdlcAbort
This counter indicates the number of received HDLC frames with abort indication.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.3.1.6.7.7.1.34
ip2IfStatRxCorrectFrames
Number of received correct frames.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.3.1.6.7.7.1.35
ip2IfStatHdlcErroredFrames
Number of received errored HDLC frames.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.3.1.6.7.7.1.36
ip2IfStatBufOverflows
Number of events that the buffer overflows. This records the count of the number of events the Receive (Eth to TDM) buffer overflows.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.164.3.1.6.7.7.1.4
ip2IfStatTxOnTimeInterval
Number of frames that were transmitted due to time interval elapse. The user can choose to Tx the Frame when it reaches the Max size or when the packetizing time interval elapses.…
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.3.1.6.7.7.1.5
ip2IfStatRxSignaling
Number of signaling frames that were received.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.3.1.6.7.7.1.7
ip2IfStatRxVoice
Number of voice frames that were received.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.3.1.6.7.7.1.8
ip2IfStatRxHdlc
Number of HDLC frames that were received.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.3.1.6.7.7.1.9