prtGsmConfigSilenceSuppressionRatio
RAD-MIB ·
.1.3.6.1.4.1.164.3.1.6.14.1.1.1.12
Object
The Silence Suppression Ratio, measured in percentages (1%).
0 = No Suppression.
In case comfort noise is rapidly changed,
it may cause the silence to be heard like a dead line
instead of hearing the comfort noise.
This parameter enables improvement of comfort noise generation,
at the expense of less optimization.
In case an invalid value is set,
the Agent should accept such a request by setting it to the nearest LOWER valid value.
For example:
- Valid values are 0, 50, 90 and 98
- Attribute is set to 89
- Agent should set the attribute to 50
.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.1.6.14.1.1.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- prtGsmConfigEntry
- Table
- prtGsmConfigTable
- Siblings
- 17
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtGsmConfigIdx1 The first index of the table.
This object might represent the Configuration Index (1..100) being accessed,
where Index=255 relates to the TmpCnfg.
For devices with … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.1 |
| prtGsmConfigUnkTrauFrameSuppression This object enables/disables suppression of unknown TRAU frames. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.10 |
| prtGsmConfigUnkTrauFrameOptimization This object enables/disables optimization of unknown TRAU frames. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.11 |
| prtGsmConfigStatus This object enables the user to create/delete entries in this table.
Its usage for values (1)..(6) should be identical to RowStatus SYNTAX.
notApplicable(255) - sho… | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.13 |
| prtGsmConfigUpstreamOptimization This object represents the Optimization Mode
at the Upstream direction (BTS -> BSC). | column | Bits | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.14 |
| prtGsmConfigDownstreamOptimization This object represents the Optimization Mode
at the Downstream direction (BSC -> BTS). | column | Bits | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.15 |
| prtGsmConfigByteReversal This object defines whether BTS/BSC reverses the bytes or not. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.16 |
| prtGsmConfigTxJitter The Transmit Jitter size (in msec), towards the BTS/BSC | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.17 |
| prtGsmConfigSpdThreshold The SPD (Smart Packet Drop) Threshold.
SPD mechanism decides which frames to drop
according to the voice energy of the frame.
A frame should be dropp… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.18 |
| prtGsmConfigIdx2 The second index of the table.
This object might represent the port index
and for some devices might be the ifIndex.
For System level or when NA, v… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.2 |
| prtGsmConfigIfType The GSM Interface Type. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.3 |
| prtGsmConfigUplinkTxDirection The Tx Direction toward the network. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.4 |
| prtGsmConfigSubChRate The Sub Channel Rate. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.5 |
| prtGsmConfigClockTracking The Clock Tracking.
This object is relevant only when Egress Uplink is LAN and
the device (e.g. Vmux) on the BSC side is Rx Clock and
the device (e.g. Vmux) on the BTS side is Int… | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.6 |
| prtGsmConfigTrauIdleFrame The TRAU frame to be used between calls. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.7 |
| prtGsmConfigDownlinkTrauSilenceFrame The TRAU frame to be used in the downlink direction
for silence/missing data. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.8 |
| prtGsmConfigGprsFrame The GPRS Frame Type. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.9 |