pktSwchLapbLineOptionA

RAD-MIB · .1.3.6.1.4.1.164.8.4.1.2.1.3
MIB view Table view

Object

column Integer32 
The line option currently used on this link.  A value of zero
indicates no options.  A value between 1 and 255 inclusive specifes
a time in minutes after which the line will be disconnected if no
session is open.  The following values have the associated meanings:
		       256     Dialed line
		       512     Return to leased line
		       1024   DTR is ON permanent
		       2048   DTR is OFF permanent.
	 any valid combination of the above options should be represented as
	 a sum of the corresponding values. Valid combinations are:
	 DTR ON or OFF (but not both). Dialed line options or not applicable.
	 If DTR control is on (256), then all combinations are possible
	 except 1024 and 2048 (which are not possible).

Context

MIB
RAD-MIB
OID
.1.3.6.1.4.1.164.8.4.1.2.1.3
Type
column
Access
readonly
Status
current
Parent
pktSwchLapbAEntry
Table
pktSwchLapbATable
Siblings
17

Syntax

Integer32

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
pktSwchLapbLinkNumberA
The link number with which this entry is associated. This value corresponds to pktSwchPhyInterfaceNumber. There is an entry for each link for which the pktSwchPhyInterfaceProtoc…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.164.8.4.1.2.1.1
pktSwchLapbNSError
The number of I frames transmitted out of sequence.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.8.4.1.2.1.10
pktSwchLapbTransmittedRRFrames
The transmitted RR frames on this link.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.8.4.1.2.1.11
pktSwchLapbReceivedRRFrames
The received RR frames on this link.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.8.4.1.2.1.12
pktSwchLapbTransmittedRNRFrames
The transmitted RNR frames on this link.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.8.4.1.2.1.13
pktSwchLapbReceivedRNRFrames
The received RNR frames on this link.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.8.4.1.2.1.14
pktSwchLapbTransmittedFRMRFrames
The transmitted FRMR frames on this link.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.8.4.1.2.1.15
pktSwchLapbReceivedFRMRFrames
The received FRMR frames on this link.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.8.4.1.2.1.16
pktSwchLapbAckCounterA
This object defines how many frames will be received on the link before the PS will send Acknowledge (RR frame). It is used for Piggy Back Acknowledge (ack within the info frames)…
columnInteger32.1.3.6.1.4.1.164.8.4.1.2.1.17
pktSwchLapbAckTimerA
The Ack Timer defines the maximum time in seconds that the device will wait before sending RR acknowledgment on the received frames. It is used for Piggy Back Acknowledge (ack wit…
columnInteger32.1.3.6.1.4.1.164.8.4.1.2.1.18
pktSwchLapbInternalClockA
The internal clock speed currently used on this LAPB link. If external clock is used, the value is 255.
columnEnumeration.1.3.6.1.4.1.164.8.4.1.2.1.2
pktSwchLapbSegmentSizeA
The current value of the segment size.
columnInteger32.1.3.6.1.4.1.164.8.4.1.2.1.4
pktSwchLapbLineProtocol
This is the lower level protocol which runs under this lapb interface.
columnEnumeration.1.3.6.1.4.1.164.8.4.1.2.1.5
pktSwchLapbLowerId
In case of X.25 over Frame-relay this is the lower level link number.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.164.8.4.1.2.1.6
pktSwchLapbXIDA
When this parameter is different than zero, this lapb is configured as a V25 bis dialed link. This is the XID entry which this dialed link is associated with.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.164.8.4.1.2.1.7
pktSwchLapbTransmittedIFrames
The transmitted I frames on this link.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.8.4.1.2.1.8
pktSwchLapbReceivedIFrames
The received I frames on this link.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.8.4.1.2.1.9