atmSuPortDataDCD

RAD-MIB · .1.3.6.1.4.1.164.12.4.2.1.1.3

MIB view Table view

Object

column r/w Enumeration

This attribute indicates if the bits CtsCd( Clear-to-send Carry-detect)
are being checked. In AMCD CTS is also checked.
off - ignore DCD signal
	   on  - obey DCD signal

Context

MIB: RAD-MIB
OID: .1.3.6.1.4.1.164.12.4.2.1.1.3
Type: column
Access: readwrite
Status: current
Parent: atmSuPortDataCnfgEntry
Table: atmSuPortDataCnfgTable
Siblings: 12

Syntax

Enumeration

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
atmSuPortDataApplication This attribute indicates the protocol application which runs above the physical port.	column	Enumeration	`.1.3.6.1.4.1.164.12.4.2.1.1.1`
atmSuPortDataInterfaceType Physical layer interface type. (Configureable or Non-Configureable)	column	Enumeration	`.1.3.6.1.4.1.164.12.4.2.1.1.10`
atmSuPortDataClkPolarity This object indicates the clock polarity. For LA-110/140 this object will be applicable only for X.21/V.35/data port	column	Enumeration	`.1.3.6.1.4.1.164.12.4.2.1.1.11`
atmSuPortDataCtsStatus CTS status - the signal state received from ATM network (for the local DTE usage). LA110 receiving RTS down from remote DTE device via ATM network, will change CTS signal stat…	column	Enumeration	`.1.3.6.1.4.1.164.12.4.2.1.1.12`
atmSuPortDataRtsStatus RTS status - the signal state received from local DTE (to be forwarded to ATM network). LA110 receiving RTS down from the local DTE device will transmit all '1' to ATM (in…	column	Enumeration	`.1.3.6.1.4.1.164.12.4.2.1.1.13`
atmSuPortDataRate This attribute indicates the operation rate of the port. AmcdT1 / Ace-20T allowes rates up to 1536KBps ( options 1-12 ), while AmcdE1 / Ace-20E allowes all options.	column	Enumeration	`.1.3.6.1.4.1.164.12.4.2.1.1.2`
atmSuPortDataMode deprecated This attribute indicates the port mode of sampling data physical.	column	Enumeration	`.1.3.6.1.4.1.164.12.4.2.1.1.4`
atmSuPortDataCRC This attribute indicates the type of CRC checking on receiving/transmiting frames.	column	Enumeration	`.1.3.6.1.4.1.164.12.4.2.1.1.5`
atmSuPortDataClock This attribute indicates the clock using for synchronization for the data port.	column	Enumeration	`.1.3.6.1.4.1.164.12.4.2.1.1.6`
atmSuPortDataMaxNoOfConns this object indicates the maximum number of cross-connect connections allowed beetween the ATM port and the Data Port identified by IfIndex.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.12.4.2.1.1.7`
atmSuPortDataConfNoOfConns this object indicates the configured number of cross-connect connections exist beetween the ATM port and the Data Port identified by IfIndex.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.12.4.2.1.1.8`
atmSuPortDataIdleCode This attribute is applicable only for application aal1Stream. It indicates the value to be transmitted whenever the port is idle.	column	Integer32	`.1.3.6.1.4.1.164.12.4.2.1.1.9`