vcGroupCnfgLcasStatus
RAD-MIB ·
.1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.14
Object
column
Enumeration
This object summarize LCAS states of all VCs in VCG:
belowMinNoOfVCs - Number of VCs in Norm state is less than
the minimum number of VCs
(indicated by vcGroupCnfgLcasMinNoOfVCs)
withinRange - Number of VCs in Norm state is higher than
the minimum number of VCs
indicated by vcGroupCnfgLcasMinNoOfVCs)
but is lower than Number of VCs mapped
allNorm - Number of VCs in Norm state equals
number of mapped VCs.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.14- Type
- column
- Access
- readonly
- Status
- current
- Parent
- vcGroupCnfgEntry
- Table
- vcGroupCnfgTable
- Siblings
- 19
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | notApplicable |
6 | idle |
9 | ok |
10 | fail |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vcGroupCnfgIdx This object indicates the Idx of the Config being accessed.
Idx of 255 relates to the Temporary (Scratch) Config.
For products that support several configurations, Set can be perf… | column | Integer32 | .1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.1 |
| vcGroupCnfgGfpChId Generic Framing Procedure (GFP) Channel ID,
Valid only when vcGroupCnfgEncapsulation = gfp (4)
Valid values are 0x00 - oxFF (hex) | column | Integer32 | .1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.10 |
| vcGroupCnfgK4 This object controls whether K4 byte
(of Line Overhead) is used as an indication for
virtual concatenation (VCAT).
This object is applicable, when VCG
includes only a single Vir… | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.11 |
| vcGroupCnfgExSignalLabel Extended Signal Label.
Relevant only when vcGroupCnfgK4 = yes(3).
Agents that do not support this feature will send SIZE 0. | column | OctetString | .1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.12 |
| vcGroupCnfgLcasMinNoOfVCs Minimum number of VC's to declare alarm, in LCAS mode.
Applicable only when LCAS is active
(vcGroupCnfgLCAS =lcasActive)
1...63 for SDH, 1...84 for SONET
0= not applicable. | column | Integer32 | .1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.13 |
| vcGroupCnfgMappingMode This object define Path Protection mode for VCG.
Auto - the entire mapping for Virtual Concatenation Group x
is copied automatically by agent for the protection group
to same … | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.15 |
| vcGroupCnfgTrafficType This object allows to select traffic type for
specific VCG. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.16 |
| vcGroupCnfgGroupName Virtual Concatenation Group (VCG) Name.
String length is limited to 15 characters. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.17 |
| vcGroupCnfgLoopDetection VCAT Loop detecetion enabled. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.18 |
| vcGroupCnfgLcasWaitToRestore Time duration (in milliseconds units) waited after
errors on channel stopped, before channel is reused. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.19 |
| vcGroupCnfgNumber Virtual Concatenation Group Number.
For FCD-155 up to eight groups are defined
valid values are 1..8.
For MP-4100, group ifIndex is used. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.2 |
| vcGroupCnfgLcasHoldOff Time duration (in milliseconds units) in which errors on channel
are disregarded. (Threshold) | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.20 |
| vcGroupCnfgRowStatus Creation/Deletion of rows in the table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.3 |
| vcGroupCnfgVcType User may select type of SDH Virtual Containers (VC)
(SONET Virtual Tributaries VT ) to be concatenated
in this Virtual Concatenation Group.
For SDH, values 2,3,4 and 8 are valid… | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.4 |
| vcGroupCnfgNoOfVCs User may select number of Virtual Containers (VC)
(SONET Virtual Tributaries VT ) to be concatenated
in this Virtual Concatenation Group.
Valid range for this number depends on … | column | Integer32 | .1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.5 |
| vcGroupCnfgLCAS This object controls Link Capacity Adjustment
Scheme (LCAS) activation. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.6 |
| vcGroupCnfgEncapsulation This object enables user to select encapsulation method. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.7 |
| vcGroupCnfgGroupIfIndex The ifIndex assigend to this group. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.8 |
| vcGroupCnfgRip2 This object controls RIP 2.
User may select to send RIP 2 message over
selected group or not | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.9 |