prtSpCmd
RAD-MIB ·
.1.3.6.1.4.1.164.3.3.3.4.1.1.19
Object
column
r/w
OctetString
SP Command. For LRS this parameter will be used for a Modem Command. Upon NMS's Get operation for devices that this parameter is notApplicable, agent will send NULL string.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.3.3.4.1.1.19- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- prtSpCnfgEntry
- Table
- prtSpCnfgTable
- Siblings
- 21
Syntax
OctetString
Values & Constraints
Enumerated Values
1 | notApplicable |
2 | disable |
3 | enable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtSpCnfgIdx This attribute indicates the Idx of the Cnfg(1..255) being
accessed.
Idx of 255 relates to the TmpCnfg. | column | Integer32 | .1.3.6.1.4.1.164.3.3.3.4.1.1.1 |
| prtSpDcdDelay DCD delay in msec.
d10 = delay of 10msec.
This object is applicable only for port (1) = SP | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.4.1.1.10 |
| prtSpDsr DSR line state. This object is applicable only for
port (1) = SP | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.4.1.1.11 |
| prtSpNoOfRetries For DXC - this object is applicable only for port (2) = DP.
The number of dialing retries requested.
Default = 0 | column | Integer32 | .1.3.6.1.4.1.164.3.3.3.4.1.1.12 |
| prtSpWaitForConnect For DXC - this object is applicable only for port (2) = DP.
Waiting time for connect, in seconds.
Default = 30 sec. | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.4.1.1.13 |
| prtSpDialMode For DXC - this object is applicable only for port (2) = DP.
Dialing mode.
Default=tone | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.4.1.1.14 |
| prtSpAltNumMode For DXC - this object is applicable only for port (2) = DP.
It determines wether to use the alternate number or not.
Default = no. | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.4.1.1.15 |
| prtSpPrimaryNum For DXC - this object is applicable only for port (2) = DP.
It is the Primary dialing number. | column | OctetString | .1.3.6.1.4.1.164.3.3.3.4.1.1.16 |
| prtSpAltNum For DXC - this object is applicable only for port (2) = DP.
It is the Alternate dialing number. This number
is applicable only if prtSpAltNumMode is 'yes'. | column | OctetString | .1.3.6.1.4.1.164.3.3.3.4.1.1.17 |
| prtSpRoutProtocol This attribute indicates the routing protocol of the port.
notApplicable - for DP. | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.4.1.1.18 |
| prtSpPrtIdx This attribute indicates a unique port number of the SPor DP port.
For DXC, it is the port in the active DCL card:
- SP = 1
- NP ; DP = 2
For Kilomux, th… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.3.3.4.1.1.2 |
| prtSpActCallOut This object indicates when to Activate Call-Out.
It is used by FCD-T1/E1.
always - to activate call-out always.
linkFail - to activate call-out only when Link of Inband Management… | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.4.1.1.20 |
| prtSpAlrRelayMode This attribute indicates the Alarm Relay Mode.
notApplicable - for DP. | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.4.1.1.21 |
| prtSpStopBits This attribute indicates number of stop bits in an async frame. | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.4.1.1.22 |
| prtSpUsage This attribute indicates what is the usage of the port. | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.4.1.1.3 |
| prtSpRate This attribute indicates the operation rate (speed) of the port.
auto - automatic rate selection, by the agent. | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.4.1.1.4 |
| prtSpDataBits This attribute indicates the number of data bits in async
frame | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.4.1.1.5 |
| prtSpParity This attribute indicates the parity mode in async frame | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.4.1.1.6 |
| prtSpCallOutMode This attribute indicates the call-out mode.
For DXC - this object is applicable only for the DP port (2). | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.4.1.1.7 |
| prtSpInterface This attribute indicates the supervisory port interface.
dce - the DACS appears as a DCE for the port.
dte - the DACS operates as a DTE, for connection via modem,
for the po… | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.4.1.1.8 |
| prtSpCTS CTS line state. This object is applicable only for
port (1) = SP | column | Enumeration | .1.3.6.1.4.1.164.3.3.3.4.1.1.9 |