sysGenRebuildFrame

RAD-MIB · .1.3.6.1.4.1.164.3.6.1.1.1.1.11

MIB view Table view

Object

column r/w Enumeration

How to rebuild frame (when a CH is connected/disconnected):
automatically - immediately, by automatic frame allocation (by Kmux)
manually - manually configured frame allocation (by user), or Rebuild 
Frame command to ML card.

Context

MIB: RAD-MIB
OID: .1.3.6.1.4.1.164.3.6.1.1.1.1.11
Type: column
Access: readwrite
Status: current
Parent: sysGenKmuxEntry
Table: sysGenKmuxTable
Siblings: 10

Syntax

Enumeration

Values & Constraints

Enumerated Values

`107`	kmxIO1
`108`	kmxIO2
`109`	kmxIO3
`110`	kmxIO4
`111`	kmxIO5
`112`	kmxIO6
`113`	kmxIO7
`114`	kmxIO8
`115`	kmxIO9
`116`	kmxIO10
`117`	kmxIO11
`118`	kmxIO12

Related Objects

Sibling Objects

Object	Type	Syntax	OID
sysGenConfigIdx This object indicates the Configuration number (1..255) referred. Value of 255 specifies the TmpCnfg (Scratch). The write operation in this Table is valid only to the TmpCnfg e…	column	Integer32	`.1.3.6.1.4.1.164.3.6.1.1.1.1.1`
sysGenResetBypassEnable Enable/Disable Reset Bypass operation when a KDI card exists and one of its links failed. notApplicable - when no KDI card exists in the Hub.	column	Enumeration	`.1.3.6.1.4.1.164.3.6.1.1.1.1.10`
sysGenFlipIntegration The parameter is relevant only for KM-2100 and only when sysGenMlMode=redundancy, switchBackup, or priorityBumping.	column	Enumeration	`.1.3.6.1.4.1.164.3.6.1.1.1.1.2`
sysGenMlMode The Main Link operation mode. Determines how many links are used (one/two) and how they are used.	column	Enumeration	`.1.3.6.1.4.1.164.3.6.1.1.1.1.3`
sysGenFaType Frame Allocation type: auto - automatic frame allocation (by Kmux) manual - manually configured frame allocation (by user).	column	Enumeration	`.1.3.6.1.4.1.164.3.6.1.1.1.1.4`
sysGenLinkRecovery The parameter determines the Link Recovery mode. The parameter is relevant only when the sysGenMlMode is either switchBackup or priorityBumping.	column	Enumeration	`.1.3.6.1.4.1.164.3.6.1.1.1.1.5`
sysGenLinkSourceClock The source clock for the links. The parameter is relevant only for KM-2100 having a KDI or KDI/CH cards. ML-A or ML-B are selectable only when sysGenMlMode=dual or priorityBumpi…	column	Enumeration	`.1.3.6.1.4.1.164.3.6.1.1.1.1.6`
sysGenMngBwA The required management rate for ML-A, in bps. It is very important when a remote unit is managed. The selected value must be < ML-A Rate value. 0 = None or not applicable 800 …	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.6.1.1.1.1.7`
sysGenMngBwB The required management rate for ML-B, in bps. It is very important when a remote unit is managed. The selected value must be < ML-B Rate value. 0 = None or not applicable 800 …	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.6.1.1.1.1.8`
sysGenAutoDialSlot This object indicates the IO-SLOTs that can be used to initiate Automatic DialUp. This field will be applicable when KML.10 is a ML and its prtIsdnSwitchMode=auto. Each IO Slot i…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.6.1.1.1.1.9`