pwGenSubType

RAD-MIB · .1.3.6.1.4.1.164.14.1.1.1.1.17

MIB view Table view

Object

column r/w Enumeration

This object indicates the PW Sub Type
(i.e. Sub Type of 'pwType' from 'pwTable').
              
For ACE-3000 devices:
It is applicable only when pwType = basicCesPsn(21).

Context

MIB: RAD-MIB
OID: .1.3.6.1.4.1.164.14.1.1.1.1.17
Type: column
Access: readwrite
Status: current
Parent: pwGenEntry
Table: pwGenTable
Siblings: 18

Syntax

Enumeration

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
pwIdx Index of this table. The value for this object is equal to the value of pwIndex from the pwTable of PW-STD-MIB	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.164.14.1.1.1.1.1`
pwGenIpNextHop This object defines local Next Hop IP Address for this PW. 0.0.0.0 - means - not applicable. This object is applicable only when pwGenNextHopType=ipV4	column	RFC1155-SMIIpAddress	`.1.3.6.1.4.1.164.14.1.1.1.1.10`
pwGenMacNextHop This object defines local Next Hop MAC Address for this PW. 0:0:0:0:0:0 - means - not applicable. This object is applicable only when pwGenNextHopType=bridgePort	column	MacAddress	`.1.3.6.1.4.1.164.14.1.1.1.1.11`
pwGenEnableVlanTag This object enables or diables a VLAN tag on every transmitted paket via this PW connection	column	Enumeration	`.1.3.6.1.4.1.164.14.1.1.1.1.12`
pwGenVlanId This object indicates the VLAN ID tag attached to every transmitted packet via this PW connection. This entry is applicable only if pwGenEnableVlanTag=enabled (3).	column	Unsigned32	`.1.3.6.1.4.1.164.14.1.1.1.1.13`
pwGenVlanPriority This object indicates the VLAN priority assigned to every transmitted packet via this PW connection. This entry is applicable only if pwGenEnableVlanTag=enabled (3)	column	Unsigned32	`.1.3.6.1.4.1.164.14.1.1.1.1.14`
pwGenIpTos This object indicates TOS field value for pw having pwPsnType= ip (3)	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.164.14.1.1.1.1.15`
pwGenSourceUdpPort This object indicates source UDP port (1...65535) value for pw having pwPsnType= ip (3)	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.164.14.1.1.1.1.16`
pwGenSourceIpAddress Source IP Address per PW	column	RFC1155-SMIIpAddress	`.1.3.6.1.4.1.164.14.1.1.1.1.18`
pwGenSourceIpMask Source IP Mask per PW	column	RFC1155-SMIIpAddress	`.1.3.6.1.4.1.164.14.1.1.1.1.19`
pwGenPeerIdx This object indicates the Index of the Peer (as it is defined in the Peer Table), which terminated this PW.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.164.14.1.1.1.1.2`
pwGenAttachmentCircuit This is a unique index within the ifTable. It represents the attached circuit interface (e.g ATM VC, HDLC) attached to this PW connection (from service initiator side). …	column	IF-MIBInterfaceIndexOrZero	`.1.3.6.1.4.1.164.14.1.1.1.1.3`
pwGenOutgoingInterface This is a unique index within the ifTable. It represents the outgoing interface (towards the PSN ) attached to this PW connection. This object is applicable onl…	column	IF-MIBInterfaceIndexOrZero	`.1.3.6.1.4.1.164.14.1.1.1.1.4`
pwGenOamMode This objects defines whether OAM will be enabled on this PW. notApplicable(1) value will be used when PW type does not support OAM.	column	Enumeration	`.1.3.6.1.4.1.164.14.1.1.1.1.5`
pwGenOamType This objects defines the failure detection mechanism used on this PW. BFD - Bidirectional Forwarding Detection notApplicable(1) value will be used when pwGenOamMode is notApplica…	column	Enumeration	`.1.3.6.1.4.1.164.14.1.1.1.1.6`
pwGenSequenceNumberField This object defines whether processing of Sequence Number field (ATM cell encapsulation) will be done by device, on this PW.	column	Enumeration	`.1.3.6.1.4.1.164.14.1.1.1.1.7`
pwGenNextHopType Indicates address type of the Next Hop. Not applicable for device with router.	column	Enumeration	`.1.3.6.1.4.1.164.14.1.1.1.1.8`
pwGenNextHop Not applicable (=0) when pwMplsEgressTunnelNextHopType=notApplicable. When applicable, represents ATM VC, Bridge Port, according to pwMplsEgressTunnelNextHopType.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.164.14.1.1.1.1.9`

Indexes