prtExHsrSltIdx

RAD-MIB · .1.3.6.1.4.1.164.3.2.3.2.10.1.1.2

Object

column Enumeration

This object indicates a unique  slot  position where
the card is inserted.

Context

MIB: RAD-MIB
OID: .1.3.6.1.4.1.164.3.2.3.2.10.1.1.2
Type: column
Access: readonly
Status: current
Parent: prtExHsrCnfgEntry
Table: prtExHsrCnfgTable
Siblings: 19

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	r1x56eq56Kbps
`2`	r1x64eq64Kbps
`3`	r2x56eq112Kbps
`4`	r2x64eq128Kbps
`5`	r3x56eq168Kbps
`6`	r3x64eq192Kbps
`7`	r4x56eq224Kbps
`8`	r4x64eq256Kbps
`9`	r5x56eq280Kbps
`10`	r5x64eq320Kbps
`11`	r6x56eq336Kbps
`12`	r6x64eq384Kbps
`13`	r7x56eq392Kbps
`14`	r7x64eq448Kbps
`15`	r8x56eq448Kbps
`16`	r8x64eq512Kbps
`17`	r9x56eq504Kbps

Related Objects

Sibling Objects

Object	Type	Syntax	OID
prtExHsrCnfgIdx This object indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg	column	Integer32	`.1.3.6.1.4.1.164.3.2.3.2.10.1.1.1`
prtExHsrCts CTS. This object is applicable for Async protocol only.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.10.1.1.10`
prtExHsrClkMode Clock mode. This object is applicable for Sync protocol only.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.10.1.1.11`
prtExHsrLinkTo deprecated It indicates the slot of the main link card to which the HS-R card is mapped. notApplicable - for HS-U/1 internal ports. STATUS deprecated - this object is replaced by prtGenCnfg…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.10.1.1.12`
prtExHsrDcdDsr DCD & DSR.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.10.1.1.13`
prtExHsrOperMode This object indicates the operation mode of the port. normal = bi-directional (Tx/Rx) unidirectRx = unidirectional Rx. broadcast = Tx upon request.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.10.1.1.14`
prtExHsrRtsDtr RTS & DTR.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.10.1.1.15`
prtExHsrLlbEnable Enable/Disable LLB.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.10.1.1.16`
prtExHsrRlbEnable Enable/Disable RLB.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.10.1.1.17`
prtExHsrRateAdapt Rate Adaptation - takes a low rate and adapts it to 64Kbps. This object specifies the means this adaptation is done by.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.10.1.1.18`
prtExHsrRemoteModem Remote modem. asmi31s2 = ASMi-31/2	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.10.1.1.19`
prtExHsrEncapsMode Low Speed encapsulation method over PCM. When Encapsulation mode is Latency optimized, only rates up to 19.2 are supported. In this case a double number of bits occ…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.10.1.1.20`
prtExHsrPrtIdx A unique prt identifier within the card. Valid values: For MP: - For HS-R cards: exPrt1 (1) .. exPrt4 (4) - For HS-U/1 cards: inPrt1 (101) .. inPrt4 (104) - For HS-S12, H…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.2.3.2.10.1.1.3`
prtExHsrConnect This object indicates whether the port should be considered in any of the mux algorithms.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.10.1.1.4`
prtExHsrProtocol This object indicates the protocol.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.10.1.1.5`
prtExHsrRate This object indicates the port speed. The 16,32,48,56,64 and 128 kbps rates are applicable only for Sync protocol. The 57.6 and 115.2 kbps rates are applicable only for Async prot…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.10.1.1.6`
prtExHsrDataBits Data Bits. This object is applicable for Async protocol only.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.10.1.1.7`
prtExHsrParity - For HS-R card, this object indicates if the parity bit is needed or not. Therefore, the 'no' and 'yes; values are applicable. - For HS-S12, HS-U12, the parity type is selected:…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.10.1.1.8`
prtExHsrStopBits This object indicates the minimum number of stop bits in the tx async frame. This object is applicable for Async protocol only.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.10.1.1.9`