modmSaConfigResetStatistics
RAD-MIB ·
.1.3.6.1.4.1.164.3.4.1.1.1.1.7
Object
column
r/w
Enumeration
In the on state all statistics counters (including E1 counters) are zeroed. Upon completion, the value will automatically change to off(2). Modems that do not support statistics - the value will always be off (this object is not applicable for them). notApplicable - for modems with no statistics support.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.4.1.1.1.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- modmSaConfigEntry
- Table
- modmSaConfigTable
- Siblings
- 11
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | unknown |
2 | asmi24c |
3 | asmi31c |
4 | asmi32c |
5 | asmi50c |
6 | mtmi20c |
7 | fomi40c |
8 | fomiE1T1c |
9 | asm40cd |
10 | asmi31cq |
11 | asmi51cq |
12 | asmi51cd |
13 | asmi52cq |
14 | asmi52cd |
15 | asmi52cd4W |
16 | asmi52cqEth |
17 | asmi52cd4wNew |
18 | asmi52cd4wNewEth |
22 | asmi24r |
23 | asmi31r |
24 | asmi32r |
25 | asmi50r |
26 | mtmi20r |
42 | asmi24 |
43 | asmi31 |
44 | asmi32 |
45 | asmi50 |
46 | mtmi20 |
47 | fomi40 |
48 | fomiE1T1 |
49 | asmi51 |
50 | asmi52S |
51 | asmi52M |
52 | asmi52L |
53 | asmi54 |
71 | lrs52 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| modmSaConfigMode The mode indicates if the configuration parameters refer
the Central or the Remote Modem.
For AMC 102 the remote means regenerator.
There can be some regenerators connecting one… | column | Enumeration | .1.3.6.1.4.1.164.3.4.1.1.1.1.1 |
| modmSaConfigRemote This parameter enables or disables automatic configuration
of the remote moden in Proxy mode. | column | Enumeration | .1.3.6.1.4.1.164.3.4.1.1.1.1.10 |
| modmSaConfigPsType The type of PS. | column | Enumeration | .1.3.6.1.4.1.164.3.4.1.1.1.1.11 |
| modmSaConfigWorkMode The work mode indicates if devices work in transparent mode or termination mode. | column | Enumeration | .1.3.6.1.4.1.164.3.4.1.1.1.1.12 |
| modmSaConfigLoopback The possible loopbacks. It is not possible to have a
remPortLoop(4) in both, Central and Remote units
simultaneously. | column | Enumeration | .1.3.6.1.4.1.164.3.4.1.1.1.1.2 |
| modmSaConfigAlrClearOnCmd Setting this attribute to on, clears all the events,
both from the active alarms list and from the alarms buffer.
Upon completion, the value will automatically change to
off(2). | column | Enumeration | .1.3.6.1.4.1.164.3.4.1.1.1.1.3 |
| modmSaConfigAlrClearAllCmd Setting this attribute to on, clears all the alarms of the
alarm buffer and active alarms list. Upon completion, the
value will automatically change to off(2). | column | Enumeration | .1.3.6.1.4.1.164.3.4.1.1.1.1.4 |
| modmSaConfigTestClearCmd Setting this attribute to on, clears all the user-initiated
tests and loopbacks. The variable modmSaConfigLoopback should
automatically change to noLoopback. Upon completion, the … | column | Enumeration | .1.3.6.1.4.1.164.3.4.1.1.1.1.5 |
| modmSaConfigClkMaster Modem configured as Central:
External - Locked to the clock signal provided by the user's
equipment by user's port.
Internal - Internal oscillator.
Station … | column | Enumeration | .1.3.6.1.4.1.164.3.4.1.1.1.1.6 |
| modmSaConfigActiveTs This object will be RO for the Remote modem.
This is the number of active HDSL Time Slots, that
determines user's data rate.
Valid values: 1..maximum supported by the specific mo… | column | Integer32 | .1.3.6.1.4.1.164.3.4.1.1.1.1.8 |
| modmSaConfigReset Reset of modem.
hw - HW Reset. The configured values will not change.
hwAndConfig - HW Reset and initializing the default values.
notApplicable - for modems with no Reset support.… | column | Enumeration | .1.3.6.1.4.1.164.3.4.1.1.1.1.9 |